Search Results

Search found 19533 results on 782 pages for 'machine specifications'.

Page 650/782 | < Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657  | Next Page >

• Hard drives (SATA/ATA) corrupting

  - by JC Denton

  Hello All, 2 years ago I bought relatives a new computer for christmas and installed Ubuntu on it. Ever since then it has been experiencing problems with the hard drives. The hard drive supplied with the machine was a SATA drive. When it appeared it was having problems (files and folders with invalid encoding started appearing) I replaced the SATA drive with the drive of their previous computer. I replaced it (The replacement) later on, the drive being rather old and thus becoming more prone to the risk of failure. The replacement drive is a IDE drive but the same problems started to appear (files and folders showing up in nautilus with invalid encoding). I fear the files and folders that are showing are existing FS entries, starting to corrupt. As it's happening to both the IDE and SATA drive it's unlikely to be the drives themselves or the IDE/SATA controller, I believe. Any ideas as to what could be causing the (assumed) corruption? EDIT: You're right about the paragraphs. They were there in edit mode but I'm still getting to grips with the whitespace format codes. The system is a "Primo Pro" AMD Phenom II X4 Quad Core 920 2.80GHz SILENT DDR2, ordered from overclockers.co.uk and nothing has been added to it except for the replacement of the SATA drive with an AMD drive. It would seem unlikely for a barebones system to be underpowered.

  Read the article

• Software Diagnostics Tool recommendations for Debugging a Windows 8 freeze

  - by Stuart

  I've had my HP Pavillion dv6 laptop since last November - and it has had 8GB RAM and a 256GB Crucial M4 SSD installed since the start. I use it for software development and it's had a Windows 8 RTM installation since early September. Yesterday I had to give a presentation at a customer site - so used Powerpoint for the first time since installing Win8... since that point my machine has 'frozen' every 2 hours or so after startup. There doesn't seem to be any easy to see reason behind the freeze - the system just freezes, even if I have left it idle with just a desktop there. My immediate suspicion is that the SSD is the mostly likely cause of the problem. I've looked at some of the questions on here - e.g. How do I troubleshoot hardware issues related to a computer freeze/crash? - but don't really want to start taking my laptop apart. Another suspicion is that this might be related to the WiFi adapter (Broadcom 802.11n) since I have noticed that this doesn't seem to play perfectly with things like Hyper-V in Win8. Can anyone recommend any software diagnostic tools that I can run in order to evaluate the health of the SSD or of other parts of the system? Thanks Stuart P.S. I doubt Powerpoint is the cause of this, but I may use it as an excuse never to use it again... More realistically perhaps something got damaged during travel to the customer site?

  Read the article

• Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

  - by nmichaels

  I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

  Read the article

• IIS Windows Authentication not working in Internet Explorer via host name; works via IP

  - by jkohlhepp

  I'm trying to get a new Windows Server 2003 box working to host an ASP.NET application that uses Windows Authentication. Here's some info: IIS Anonymous Access is diabled IIS Integrated Windows Authentication is enabled I've tried it with and without Digest Authentication and it is the same result Both my machine and the server are in same active directory domain on the same intranet I'm using IE 6 My symptoms: In Firefox, via either IP or host name, a login box pops up, and if I enter my NT credentials, it works. In IE, via the server IP address, it works perfectly with no login box. In IE, via the server host name, it pops up a login box but even if I put in the correct credentials, it just pops up the box again. This is the problem. Why won't windows auth work in IE via host name but it will via IP address? Edit: Here's something else interesting. If I go into my Internet Explorer advanced settings and disable Windows Authentication, it seems to work just fine. And by work I mean that my test .NET app sees my NT ID as the current user.

  Read the article

• Unable to communicate with EWS from Exchange Server

  - by kschieck

  We are currently running a 2 server exchange environment with Edge services on their own. We are in the process of trying to deploy a piece of software that uses the EWS API which has brought me to this form, the software ties into the EWS service and uses it to forward messages (this is failing). Using the software error logs I have found that accessing EWS from the exchange server is not possible. From my work machine and an external address I can type the following https ://webmail.companyname.com/ews/exchange.asmx and be prompted for a username and password, once I enter credentials I get a screen full of information from services.wsdl. The problem is when I try the same URL from the exchange server and get the credentials prompt I cannot get past it. Even with the same credentials that work externally and from my desk it just keeps looping around. Capture from software log (11:41:32.6415 000017e4 System.Net.WebException: The request failed with HTTP status 401: Unauthorized.) I have also found the same results when trying https://webmail.companyname.com/ Autodiscover /Autodiscover.xml . Environment Information Server 2008 STD 64bit Exchange 2007 SP1 Purchased Cert – webmail.companyname.com I have also confirmed that all services have the proper internal and external URL’s. Any help would be appreciated.

  Read the article

• Spotlight actually searching every file on "This Mac"

  - by Cawas

  I know of 2 ways to search for any file in your machine using Finder (some say it's Spotlight) and no Terminal. To prevent answers / comments about Terminal, I consider it either for scripting something or as last resource. It's not practical for lots of usages. For instance, if you want to find something to attach to a mail, or embed in iTunes or any other app, you can just drag n' drop one or many of them. Definitely not practical to do under Terminal. There are many cases of use for any, but the focus here is Graphical User Interface. Well, the 2 ways basically are: Press Cmd + Opt + Spacebar and type in your search. Press the + button, select "System files" and "are included". This is so far my preferred way, but I'm not sure it will go through every file. Open Finder, press Cmd + Shift + G and/or select just one folder. Type in your search and select the folder rather than "This Mac". This will bring files not shown in "This Mac" if you select a folder outside of the default scope. Thing is, none of those is really convenient or have the nice presentation from regular Spotlight, which you get from Cmd + Spacebar and just typing. And, as far as I've heard, the default behavior on Spotlight in Tiger was actually being able to find files anywhere. So, is there any way to make the process significantly simpler? Maybe some tweak, configuration or really good Spotlight alternative? I'd rather keep it simple and tweak Spotlight.

  Read the article

• Not playing .mov files in WMP, not loading .mov files in Windows Live Movie Maker. What am I missing?

  - by royatl

  My friend needs to create a video and she has some source files that are .MOV format. I assume they are h.264. She can view the files with QuickTime. She has a laptop running Vista, and a just-downloaded version of Windows Live Movie Maker (which I'll call LMM for short). LMM shows an 'X' icon when she tries to add one of these files to it. My machine runs Windows 7 Pro, and a slightly earlier build of LMM and has no problems editing video with these source files. I assume she's missing a codec but what can I tell her? I've looked at the answer that mentions a QuickTime DirectShow Source Filter Plugin. It mentions only playback through WMP, not editing via LMM, but is that what she needs? I didn't have to load anything like that. That project's now done (she punted and used iMovie on a Mac). But I did gain another clue. She could play a 720p .MOV file, but these were 1920x1080 files.

  Read the article

• Sniffing at work- How to detect

  - by coffeeaddict

  Because of the place I work has some real issues (people) especially in IT and the owner, I wonder if we are being sniffed. Is there any way to tell if on a Vista 64-bit machine: 1) In system logs some identification that would tell me that someone might log into my PC such as an Admin 2) Something in the logs that would give me a flag about maybe I'm being monitored some other way? 3) How can I be sure that my gmail, hotmail, and chat is not being sniffed. I know there are things like Simp, etc. I'm talking about specific hidden system signs either in registry or logs. Obviously I'm not going to raise any suspicion by me asking our network admin. I don't trust anyone at this company. is there a good way to basically monitor for this as an end user? Could someone log in and basically watch me work and if so, would there be any goodies left behind for me to find out if this has happened other than visual signs which would not be present...maybe some running processes?

  Read the article

• Users database empty after Samba3 to Samba4 migration on different servers

  - by ouzmoutous

  I have to migrate a Samba 3 to a new Samba 4 server. My problem is that the database on the samba 3 server seems a bit empty. The secrets.dtb file is only 20K whereas the “pbedit -L |wc -l”command give me 16970 lines. On my Samba3 /var/lib/samba is 1,5M After I had migrate the databse (following instructions on http://dev.tranquil.it/index.php/SAMBA_-_Migration_Samba3_Samba4), “pdbedit -L” command on the new server give me only : SAMBA4$, Administrator, dns-samba4, krbtgt and nobody. So I tried to create a VM with a Samba3. I added some users, done the same things I did for the migration and now I can see the users created on the VM. It’s like users on the Samba 3 server are in a sort of cache. I already migrate the /etc/{passwd,shadow,group} files and I can see users with the “getent passwd” command. Any ideas why my users are present when I use pdbedit but the database is so empty ? The global part of my smb.conf on the Samba 3 server : [global] workgroup = INTERNET netbios name = PDC-SMB3 server string = %h server interfaces = eth0 obey pam restrictions = Yes passdb backend = smbpasswd passwd program = /usr/bin/passwd %u passwd chat = *new* %n\n *Re* %n\n *pa* username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%U max log size = 1000 socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 add user script = /usr/sbin/useradd -s /bin/false -m '%u' -g users delete user script = /usr/sbin/userdel -r '%u' add group script = /usr/sbin/groupadd '%g' delete group script = /usr/sbin/groupdel '%g' add user to group script = /usr/sbin/usermod -G '%g' '%u' add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null '%u' -g machines logon script = logon.cmd logon home = \\$L\%U domain logons = Yes os level = 255 preferred master = Yes local master = Yes domain master = Yes dns proxy = No ldap ssl = no panic action = /usr/share/samba/panic-action %d invalid users = root admin users = admin, root, administrateur log level = 2

  Read the article

• Sql Server 2005 database lost, How to recover all records. MDF/LDF size is same as it should be

  - by Shantanu Gupta

  Few months back, I installed a sql server 2005 on one of my client machine. I gave him a backup option to take backup timely but he never took any backup. Today he called me that "i m not able to see any record of mine." I visited at my clients system and saw that none of the record was present on the tables. There was not even a single row in any of the tables. Then I checked if he has any backup file which i found to be absent. I asked him the reason what could be the possible cause. He said it might be due to virus. After this I checked the size of mdf and ldf file and found it should be what it is. when i created his server mdf ldf file had 2MB of database now it is 83 MB and 193Mb mdf/ldf respectively. This shows the data is still present in it but it is not being displayed. What could be the possible cause and how can i restore all data back to my tables ?

  Read the article

• How to setup an IPSec / GRE tunnel on Windows Server 2008

  - by qbeuek

  I have a Windows Server 2008 that has a single network interface configured with a public IP address. My business partner has a private network. From my server, I need to access all the devices on his private network, and those devices must be able to access my server. My business partner has a standard solution for these requirements. They will setup an IPSec + GRE tunnel to my server. They told me, that I will need an additional public IP address for this to work. If it really is necessary, there is no problem, I can get an additional public IP address, although it will be assigned to the same physical network interface. I assume that on my server I will have both public IP addresses and also the private IP address from the tunnel (the same that is visible for the devices inside the private network). What alternatives do I have? Is it possible to configure this tunnel on my Windows Server 2008? Can it be done using only Windows tools, or do I need an additional free / commercial VPN software? If it cannot be done directly on Windows, can I setup an additional virtual machine running Linux, that will handle the IPSec + GRE tasks? How to do it? If it cannot be done on a virtual linux box, will I have to buy and setup a Cisco router to handle the IPSec + GRE tasks? Thanks for your opinions. I'm watching this question to clarify any issues or questions.

  Read the article

• Convert Mac font to Windows format?

  - by Moshe

  I have a font that was used on Mac OS X 10.5. Mac recognizes it as a font file. Windows Vista shows it as a "File". Changing the file extension doesn't work. I tried both .otf and .ttf and neither worked. (Surprise! I didn't thinks so, but I'd be a fool for asking if that was the answer, so I tried...) Perhaps I need to try a different extension? Are there any utilities to convert the font? A Windows equivalent? It's called Franco. (FrancoNormal, actually.) Thanks. EDIT: DFontSplitter didn't work. I saw something online about "data fork" and "resource fork" that has to match up. Can someone please explain that? Do I need both for a font conversion? What do I tell my graphic designer to send me? EDIT 2: The font doesn't work when downloaded to Mac OS X either. (A different machine from the original.) "Get Info" reveals that there is no file extension, leading me to believe that this is the newer font format. Where wold I find the the "data fork" and "resource fork" on the Mac? I want to be able to tell the designer exactly where to look. EDIT 3: DFontSplitter works on the original computer but not on my PC. I converted and emailed myself the fonts from the graphic designers laptop. I guess it has to do with the data being stored in a "fork" whatnot. Thanks, Matt for that article. Thank you again for your help!

  Read the article

• Update git on mac

  - by Meltemi

  I can't remember how I installed git a while back....but now it's living in /usr/bin/git and needs to be updated. I don't care how (pre-compiled or build my own) but what I don't want is another version existing somewhere else. i vaguely remember curl(ing) down the source & compiling it. but not positive. anyway, what's the easiest way to keep Git up-to-date under Mac OS X? Side question: I'm not that familiar with git. once it's installed is it ENTIRELY contained within its directory? so, in my case, everything about git on my machine (excluding the actual code repositories of course) is in /usr/bin/git/ ? If so then can I just move git around with a simple mv -R /usr/bin/git /opt/git? Then update my $PATH and everything should work as before? if so then i supposed i could just install again by any method and to any directory...and then move the new one into /usr/bin replacing the old version?!? Or is this bad?

  Read the article

• How can I unregister a service with dns-sd?

  - by Roman

  I am trying to use "dns-sd" command line tool on my Windows 7 machine. I can already do something. For example I can register a service using "dns-sd -R ...". I also can browser (see) registered services using "dns-sd -B ...". What I still miss, is how to unregister a service. At the moment when I type "dns-sd -R ..." the dns-sd does not return me to the command prompt. To return to the command prompt I need to press Ctrl-C. And the service stays registered till I press Ctrl-C. What I want is to run "dns-sd -R ..." in the background regime and then I would like to have a possibility to unregister a service from the command line. One more thing which I do not understand yet is what "to look up a service" means. In my picture it should be sufficient to register a service, to see it and then to unregister it. But apparently I need to look up a service. What does it mean and why I need to do it? ADDED: As it is asked, I clarify. I refer to "dns-sd" command line tool which I use in Windows 7. I think this command is part of Bonjour software for Windows (from Apple). Well, I did not checked if I had this command before I installed Bonjour, but I assume I did not have it. So, my question is about this command.

  Read the article

• Connecting XRAID to Sunfire via LSI FC card - Drives not showing up

  - by Matthew Watson

  Hi, I've got a Sunfire T1000 machine ( Solaris 10 10/09 s10s_u8wos_08a SPARC ) with a LSI7404EP-LC fibre channel card in it. This is plugged into an XRAID. The system seems to have picked up the card > /usr/platform/`uname -i `/sbin/prtdiag IO Location Type Slot Path Name Model ----------- ----- ---- --------------------------------------------- ------------------------- --------- MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/NET0 PCIE MB /pci@7c0/pci@0/network@4 network-pci14e4,1668 MB/NET1 PCIE MB /pci@7c0/pci@0/network@4,1 network-pci14e4,1668 MB/NET2 PCIX MB /pci@7c0/pci@0/pci@8/network@1 network-pci108e,1648 MB/NET3 PCIX MB /pci@7c0/pci@0/pci@8/network@1,1 network-pci108e,1648 MB/PCIX PCIX MB /pci@7c0/pci@0/pci@8/scsi@2 scsi-pci1000,50 LSI,1064 However it doesn't seem to be able to see the xraid attached to it, lsiutil only reports the onboard SAS controller. > /usr/local/bin/lsiutil ~ LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009 1 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC 1. mpt0 LSI Logic SAS1064 A3 105 010a0000 0 Select a device: [1-1 or 0 to quit] I've tried adding the configuration to /kernal/drv/sd.conf and /kernal/drv/ssd.conf as per this thread, however format still cannot see any drives on the xraid. I'm not sure where to go next. Any suggestions? From what I've read..this should pretty much just eb plug it in and they show up in format..

  Read the article

• I accidentally hijacked my localhost

  - by Zach L

  Opening localhost in the browser is pointing a local webpage (examplePage) after playing with some config files a while back, and I can't figure out how to restore the default behavior. Background: I have XAMPP installed on my Windows 7 machine, and a webpage at c:/xampp/htdocs/examplePage. A couple weeks ago, I was on a mission to get sites root-relative urls (/resource) to work, so I played around with a bunch of apache/conf files, including httpd.conf and httpd-vhosts.conf and also was messing with the Windows hosts file. I gave up at some point, didn't document exactly what I did, and have since probably forgotten some of what I did. Many of my changes stemmed from suggestions in this StackOverflow post What I've Tried I commented out my additions to the hosts file I turned off XAMPP (thus hopefully negating any apache config file effect) I reverted to my original DocumentRoot in httpd.conf anyway (xampp/htdocs) localhost still displays examplePage. Even with xampp turned on (my reverted DocmentRootisn't taking effect) Does anyone know what I may have done and how I can fix it? Update : Its been resolved, thank everyone so much in taskmanager, theres a couple instances of httpd.exe (Apache HTTP Server). I ended these, and opened XAMPP, restarting apache. all references to examplePage in my .conf files that I could find had been commented out or removed. I imagine that the old versions were still in effect for some reason, and manually ending the Apache processes fixed this. As a point of interest, Its still a mystery why those processes were running - I cannot reproduce that situation. I must've stumbled upon a XAMPP bug of some sort.

  Read the article

• setting up git on cygwin - openssl

  - by user23020

  I'm trying to get git running in cygwin on a windows 7 machine I have git unpacked and the directory git-1.7.1.1 when i run make install from within that directory, I get CC fast-import.o In file included from builtin.h:4, from fast-import.c:147: git-compat-util.h:136:19: iconv.h: No such file or directory git-compat-util.h:140:25: openssl/ssl.h: No such file or directory git-compat-util.h:141:25: openssl/err.h: No such file or directory In file included from builtin.h:6, from fast-import.c:147: cache.h:9:21: openssl/sha.h: No such file or directory In file included from fast-import.c:156: csum-file.h:10: error: parse error before "SHA_CTX" csum-file.h:10: warning: no semicolon at end of struct or union csum-file.h:15: error: 'crc32' redeclared as different kind of symbol /usr/include/zlib.h:1285: error: previous declaration of 'crc32' was here csum-file.h:15: error: 'crc32' redeclared as different kind of symbol /usr/include/zlib.h:1285: error: previous declaration of 'crc32' was here csum-file.h:17: error: parse error before '}' token fast-import.c: In function `store_object': fast-import.c:995: error: `SHA_CTX' undeclared (first use in this function) fast-import.c:995: error: (Each undeclared identifier is reported only once fast-import.c:995: error: for each function it appears in.) fast-import.c:995: error: parse error before "c" fast-import.c:1000: warning: implicit declaration of function `SHA1_Init' fast-import.c:1000: error: `c' undeclared (first use in this function) fast-import.c:1001: warning: implicit declaration of function `SHA1_Update' fast-import.c:1003: warning: implicit declaration of function `SHA1_Final' fast-import.c: At top level: fast-import.c:1118: error: parse error before "SHA_CTX" fast-import.c: In function `truncate_pack': fast-import.c:1120: error: `to' undeclared (first use in this function) fast-import.c:1126: error: dereferencing pointer to incomplete type fast-import.c:1127: error: dereferencing pointer to incomplete type fast-import.c:1128: error: dereferencing pointer to incomplete type fast-import.c:1128: error: `ctx' undeclared (first use in this function) fast-import.c: In function `stream_blob': fast-import.c:1140: error: `SHA_CTX' undeclared (first use in this function) fast-import.c:1140: error: parse error before "c" fast-import.c:1154: error: `pack_file_ctx' undeclared (first use in this functio n) fast-import.c:1154: error: dereferencing pointer to incomplete type fast-import.c:1160: error: `c' undeclared (first use in this function) make: *** [fast-import.o] Error 1 I'm guessing that most of these errors are due to the iconv.h and openssl files which apparently are missing, but I can't figure out how I'm supposed to install those (if I am), or if there is some other way to get around this.

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• Mac Mini drive problems but SMART verified: bad hard drive or controller?

  - by Zac Thompson

  I have a 3-year-old Intel Mac Mini at home. About a month ago, it stopped booting from the hard drive (internal, SATA, 80GB). I tried booting from the Install Disc to repair the filesystem but Disk Utility was unable to do so ("invalid node structure"). I was also unable to use the hard drive in the Terminal from the Install Disc nor from an Ubuntu boot CD ("DRDY err"). I could see the contents of some directories, but others would give an error and I would get failures when trying to copy files. At this point I was sure the filesystem was hosed and I'd want to reformat at least. DiskWarrior was able to let me retrieve the data files I was interested in, which are now copied to an external hard drive, but it reported a high number of problems ("speed reduced by disk malfunction" count was over 2000) when in the process of trying to rebuild the directory for the drive. It also would not let me use the rebuilt directory to replace the one on the drive; it claimed the disk errors prevented recovery in this way. Under normal circumstances I would now assume that the drive itself was going bad: DiskWarrior's "disk malfunction" error above is supposed to imply hardware problems. My initial plan was to buy a replacement for the internal 2.5" drive. However: Disk Utility, command-line tools and DiskWarrior had reported all along that the SMART status of the drive was okay/Verified. So I'm now worried that the drive hardware is actually fine, and that the problems were due to a disk controller that has gone "bad" somehow. If this is the case, I'll probably just replace the whole computer. Any advice on how I can tell what is to blame? I don't have a lot of extra hardware sitting around, so I don't have the option of simply dropping the drive in another machine or popping another hard drive inside the Mini.

  Read the article

• SSL stops working on IIS7 after a reboot

  - by Mark Seemann

  I have a Windows 2008 Server with IIS7. Every time the server reboots, SSL stops working. Normal HTTP requests work fine, but any request to an HTTPS address gives the typical error message in the browser: Cannot find server or DNS I can temporarily fix it by opening IIS Manager and bring up the Bindings… window for the website in question. Then I select “https”, click on “Edit” then click “Ok” without making any changes to the settings. After doing this, browsing to https:// works again until the next reboot. This issue look as lot like the one described here, but according to the Certificates MMC snapin, the certificate in question does have a private key. I'm also pretty sure that I never installed the certificate in the personal store, but imported it straight into the machine store, but it's been a while... There's not a lot in the event log apart from the event ID 36870 also described in the post I linked to. Can anyone help me troubleshoot this issue so that SSL will work even after a server reboot?

  Read the article

• How have I locked me out from my Ubuntu VPS?

  - by Sanoj

  I have a Ubuntu Server as VPS (OpenVZ), and yesterday I installed php-fpm, but I guess something went wrong with the installation. Because since then I cannot log in to my server over SSH with PuTTY or using WinSCP. The message I get when connecting is Network error: Connection timed out. Immediately after the installation I was not able to use emacs either, I had to re-install it with apt-get install emacs. I have tried with clearing the firewall and rebooting the server from my web-based "control panel", but it doesn't help. The commands I used for installation of the PHP-fpm was from Installing PHP 5.3, Nginx And PHP-fpm On Ubuntu/Debian. And I guess it has something to do with these commands: cd /tmp wget http://us.archive.ubuntu.com/ubuntu/pool/main/k/krb5/libkrb53_1.6.dfsg.4~beta1-5ubuntu2_i386.deb wget http://us.archive.ubuntu.com/ubuntu/pool/main/i/icu/libicu38_3.8-6ubuntu0.2_i386.deb sudo dpkg -i *.deb sudo echo "deb http://php53.dotdeb.org stable all" >> /etc/apt/sources.list sudo apt-get update sudo apt-get install php5-cli php5-common php5-suhosin sudo apt-get install php5-fpm php5-cgi The web-sites that are hosted from my server works fine. Anyone that have the same experience or know how this could happen? I guess that I have to re-install Ubuntu Server from my "control panel" now, but I would like to avoid this situation in the future. Finally, I have backup on everything so nothing is lost if I have to re-install the machine.

  Read the article

• Application to automate Windows software installation in a test lab

  - by Marc

  I have several test environments (hyper-V) which contain a variety of windows servers. Each machine needs periodically rolling back to a given snapshot and then re-installing with the latest version of our software to test. The software installs are quite complex MSI's with a fair few option screens. I know that the installs can be driven from the command line, passing in parameters to override the wizard options. At the simplest level I suppose I could just write a batch file to kick off each install with the required parameters, however the values that are passed in do need to change from time to time (and environment to environment) so a tool with a config file and simple GUI seems like a better idea. I think what makes it slightly more painful is the multiple environments. For example one environment might contain 4 servers and need a config file with all the server names, service endpoints etc. Another environment might be a 1-box install with all names and endpoints set to localhost. So, ideally I want to be able to store different setup configurations and use them to run all the required installers with the relevant settings against the relevant machines. Before I go off to write the thing, does anyone know of an existing, simple, free tool that will let me achieve this?

  Read the article

• ASP.NET Web API returns 404 for PUT only on some servers

  - by Greg Bacchus

  Ok, I have been racking my brain and the internet for a solution to this. I just can't figure it out. I have written a site that uses ASP.NET MVC Web API and all working nicely until I put it on staging server. The site works fine on my local machine and the dev web server. Both dev and staging servers are Win Server 2008 R2. The problem is this: basically the site works, but there are some API calls that use the HTTP PUT method. These fail on staging returning a 404, but work fine elsewhere. The first problem that I came across and fixed was in Request Filtering. But still getting the 404. I have turned on tracing in IIS and get the following problem. 168. -MODULE_SET_RESPONSE_ERROR_STATUS ModuleName IIS Web Core Notification 16 HttpStatus 404 HttpReason Not Found HttpSubStatus 0 ErrorCode 2147942402 ConfigExceptionInfo Notification MAP_REQUEST_HANDLER ErrorCode The system cannot find the file specified. (0x80070002) The configs are the same on dev and staging, matter of fact the whole site is a direct copy. Why would the GETs and POSTs work, but not the PUTs? Thanks Greg

  Read the article

• vmware - ACE, Workstation - how to manage remoe clients??

  - by tom smith

  Hi. Exploring Vmware products/services and have a few questions. As I understand VM, you can use VMWare Workstation to create a VM of a target machine/box/OS. Let's call this VM, "foo". If I have 100 client PCs in my dept, and I want to install the VM (foo) on each client, and also manage the remote VM instances of (foo). How can I accompish this? Let's assume that the client machines are running Windows7, and have the vmplayer app installed on the box. I'm looking to do the following kinds of actions regarding the remote client machines: -Update the foo VM/image with new updated copies -Make sure that every VM "foo" has the same user, but a unique passwd -Monitor the traffic/status of each client VM "foo" oin each client -Start/Stop each client VN "foo" from the master console -Etc... Can this be accomplished? How would I do it, what services/products would I need? I've tried toalking to a few of the pre-sales guys in VMWare, and got nowhere, other than telling me to email my questions!! Looking at google shed more insight, but I still have questions. So, if you have detailed VMWare understanding, pointers to consultants, or resellers who can help, all pointers are greatly appreciated. Thanks -tom

  Read the article

• how to initialize two logical drives on a HP P400i controller without reboot

  - by John

  What I am trying to do is initialize two logical drives on a HP P400i embedded controller without a reboot of the system here my current Array config: array A (SAS, Unused Space: 0 MB) logicaldrive 1 (17.9 GB, RAID 5, OK) logicaldrive 2 (17.9 GB, RAID 5, OK) logicaldrive 3 (75.9 GB, RAID 5, OK) logicaldrive 4 (25.0 GB, RAID 5, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 72 GB, OK) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 72 GB, OK) array B (SAS, Unused Space: 0 MB) logicaldrive 5 (99 MB, RAID 0, OK) logicaldrive 6 (68.2 GB, RAID 0, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 72 GB, OK) windows 2003 machine running the HpCISs2.sys driver version 6.20.0.32 . I have the ACU and ACU CLI tools installed version 8.28.13.0, P400i firmware version 2.74 . Now what I'd like to do is removes the physical drive 1I:1:4 and delete the two logical drives in array B. then insert a new drive in to bay 4 that contains two new logical drives and have them show up in array B again. So far after I remove the drive and delete the failed logical drives, I insert the new drive and run HPacucli rescan. I get the new drive to show up as unassinged physical drive but I cant figure out now to "for lack of a better word" mount the 2 logical drives on the new unassinged disk. If I reboot the system the array controller picks up the new fourth drive and creates Array B with the drives without problem but I'd really like to not have to reboot the server. Any ideas?

  Read the article

< Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657  | Next Page >