Search Results

Search found 30858 results on 1235 pages for 'database tuning'.

Page 652/1235 | < Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >

  • How to configure mod_proxy_balancer to gracefully fail under high load

    - by bramp
    We have a system which has one Apache instance in front of multiple tomcats. These tomcats then connect to various databases. We balance the load to the tomcat with mod_proxy_balancer. Currently we are receiving 100 requests a second, the load on the Apache server is quite low, but due to database heavy operations on the tomcats, the load there is roughly 25% (of what I estimate they can handle). In a few weeks there is an event happening and we estimate that our requests will jump significant, maybe by a factor of 10. I'm doing everything I can do reduce the load on our tomcats, but I know we are going to run out of capacity, so I would like to fail gracefully. By this I mean, instead of trying to deal with too many connections which all timeout, I would like Apache to somehow monitor average response time, and as soon as the response time to Tomcat is getting above some threshold, I would like a error page displayed. This means that users who are lucky still get a page rendered quickly, and those who are unlucky get a error page quickly. Instead of everyone waiting far too long for their page, and eventually everyone timing out, and the database being swamped with queries which are never used. Hopefully this makes sense, so I was looking for suggestions on how I could achieve this. thanks

    Read the article

  • Optimizing Disk I/O & RAID on Windows SQL Server 2005

    - by David
    I've been monitoring our SQL server for a while, and have noticed that I/O hits 100% every so often using Task Manager and Perfmon. I have normally been able to correlate this spike with SUSPENDED processes in SQL Server Management when I execute "exec sp_who2". The RAID controller is controlled by LSI MegaRAID Storage Manager. We have the following setup: System Drive (Windows) on RAID 1 with two 280GB drives SQL is on a RAID 10 (2 mirroed drives of 280GB in two different spans) This is a database that is hammered during the day, but is pretty inactive at night. The DB size is currently about 13GB, and is used by approximately 200 (and growing) users a day. I have a couple of ideas I'm toying around with: Checking for Indexes & reindexing some tables Adding an additional RAID 1 (with 2 new, smaller, HDs) and moving the SQL's Log Data File (LDF) onto the new RAID. For #2, my question is this: Would we really be increasing disk performance (IO) by moving data off of the RAID 10 onto a RAID 1? RAID 10 obviously has better performance than RAID 1. Furthermore, SQL must write to the transaction logs before writing to the database. But on the flip side, we'll be reducing both the size of the disks as well as the amount of data written to the RAID 10, which is where all of the "meat" is - thereby increasing that RAID's performance for read requests. Is there any way to find out what our current limiting factor is? (The drives vs. the RAID Controller)? If the limiting factor is the drives, then maybe adding the additional RAID 1 makes sense. But if the limiting factor is the Controller itself, then I think we're approaching this thing wrong. Finally, are we just wasting our time? Should we instead be focusing our efforts towards #1 (reindexing tables, reducing network latency where possible, etc...)?

    Read the article

  • Second Day of Data Integration Track at OpenWorld 2012

    - by Doug Reid
    0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Our second day at OpenWorld and the Data Integration Team was very active with customer meetings, product updates, product demonstrations, sessions, plus much more.  If the volume of traffic by our demo pods is any indicator, this is a record year for attendance at OpenWorld.  The DIS team have had tremendous number of people stop by our demo pods to learn about the latest product releases or to speak to one of our product managers.    For Oracle GoldenGate, there has been a great deal of interest in Integrated Capture and the  Oracle GoldenGate Monitor plug-in for Enterprise Manager.  Our customer panels this year have been very well attended and on Tuesday we held the “Real World Operational Reporting with Oracle GoldenGate Customer Panel”. On this panel this year we had Michael Wells from Raymond James, Joy Mathew and Venki Govindarajan from Comcast, and Serkan Karatas from Turk Telekom. Our panelists have a great mix of experiences and all are passionate about using Oracle Data Integration products to solve very complex use cases. Each panelist was given a ten minute to overview their use of our product, followed by a barrage of questions from the audience. Michael Wells spoke about using Oracle GoldenGate for heterogeneous real time replication from HP (Tandem) NonStop to SQL Server and emphasized the need for using standard naming conventions for when customers configure GoldenGate, as the practices is immensely helpful when debugging a problem. Joy Mathew and Venkat Govindarajan from Comcast described how they have used GoldenGate for over a decade and their experiences of using the product for replicating data from HP nonstop to Terdata. Serkan Karatas from Turk Telekom dove into using Oracle GoldenGate and the value of archiving data in extremely large databases, which in Turk Telekoms case resulted in a 1 month ROI for the entire project. Thanks again to our panelist and audience participants for making the session interactive and informative.  For Wednesday we have a number of sessions available to attendees plus two hands-on labs, which I have listed below.   If you are unable to attend our hands-on lab for Oracle GoldenGate Veridata, it is available online at youtube.com. Sessions  11:45 AM - 12:45 PM Best Practices for High Availability with Oracle GoldenGate on Oracle Exadata -Moscone South - 102 1:15 PM - 2:15 PM Customer Perspectives: Oracle Data Integrator -Marriott Marquis - Golden Gate C3 Oracle GoldenGate Case Study: Real-Time Operational Reporting Deployment at Oracle -Moscone West - 2003 Data Preparation and Ongoing Governance with the Oracle Enterprise Data Quality Platform -Moscone West - 3000 3:30 PM - 4:30 PM Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active -Moscone West - 3000 5:00 PM - 6:00 PM Tuning and Troubleshooting Oracle GoldenGate on Oracle Database -Moscone South - 102 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Hands-on Labs 10:15 AM - 11:15 AM Introduction to Oracle GoldenGate Veridata Marriott Marquis - Salon 1/2 11:45 AM - 12:45 PM Oracle Data Integrator and Oracle SOA Suite: Hands-on Lab -Marriott Marquis - Salon 1/2 If you are at OpenWorld please join us in these sessions. For a full review of data integration track at OpenWorld please see our Focus-On Document.

    Read the article

  • How to disable mod_security2 rule (false positive) for one domain on centos 5

    - by nicholas.alipaz
    Hi I have mod_security enabled on a centos5 server and one of the rules is keeping a user from posting some text on a form. The text is legitimate but it has the words 'create' and an html <table> tag later in it so it is causing a false positive. The error I am receiving is below: [Sun Apr 25 20:36:53 2010] [error] [client 76.171.171.xxx] ModSecurity: Access denied with code 500 (phase 2). Pattern match "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" at ARGS:body. [file "/usr/local/apache/conf/modsec2.user.conf"] [line "352"] [id "300015"] [rev "1"] [msg "Generic SQL injection protection"] [severity "CRITICAL"] [hostname "www.mysite.com"] [uri "/node/181/edit"] [unique_id "@TaVDEWnlusAABQv9@oAAAAD"] and here is /usr/local/apache/conf/modsec2.user.conf (line 352) #Generic SQL sigs SecRule ARGS "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" "id:1,rev:1,severity:2,msg:'Generic SQL injection protection'" The questions I have are: What should I do to "whitelist" or allow this rule to get through? What file do I create and where? How should I alter this rule? Can I set it to only be allowed for the one domain, since it is the only one having the issue on this dedicated server or is there a better way to exclude table tags perhaps? Thanks guys

    Read the article

  • Can't connect to MySQL on CentOS 5 Error 13 - Permission Denied

    - by abszero
    Ok, I have an install of CentOS 5 running as a GuestOS in VirtualBox. The network card for the Cent box is bridged with that of my host OS so that the boxes can see each other. Cent has an IP of 192.168.1.108 and my Host box has an IP of .104. Everything, with regard to networking, seems to be working properly as I can access the Drupal install that is on the Cent box from a web browser on my host box by navigating to http://192.168.1.108 however when I try to configure the database for Drupal through the Drupal install interface I am getting the Can't connect to MySQL error. First I thought this might of been a Firewall issue so I stopped iptables but that had no effect. I thought maybe the user I had setup did not have access to the server so I tried root and that did not work. Searching on the net said that I needed to provide a bind-address parameter to my.cnf so I did that with no change. (As a side note the length of my my.cnf file was MUCH shorter than the ones presented online. In fact under mysqld all I have are datadir, socket, user, and bind-address. Is this normal or should the file be more verbose?) After a few hours of messing with permissions and such I tried using 'localhost' as the value for the database server, from my HOST OS, and the Drupal install kicked off without a problem. So while my issue is resolved I am curious as to why 'localhost' works and why 192.168.1.108 did not? Is there something i need to do to specifically access the MySQL box via the aforementioned IP? Thanks.

    Read the article

  • Why does MOSS sometimes delete an existing user from a site?

    - by Jesse
    I'm experiencing an issue with a MOSS installation. I am using the Site Settings Permissions to add an Active Directory account as a valid user of a site. This entails validating that the user account name is correct via the 'Check Names' button, then giving them 'Contribute' permissions. Once this is done they appear as a user on the 'All People' page. This works fine and the user is able to access the site. At some point in the future (sometimes several days later) the user account is somehow removed as a valid user from the site. This site resides in a test environment so access is pretty well controlled; which has allowed us to rule out someone else going in and removing the user manually. This appears to be something that is being done by the system itself and we have no idea why. We can manually add the user back, but then it will eventually get removed again later. I have an admittedly limited understanding of SharePoint permissions, but I believe that SharePoint stores valid users in a SQL database and I would assume that when dealing with Active Directory accounts it would be storing the user name and probably the SID. It appears that for some reason this record is later getting deleted out of the database, as the users will suddenly disappear from the "All People" page and will start getting "Access Denied: You are not authorized..." messages when trying to access the site. Has anyone seen this behavior before?

    Read the article

  • Tripwire help Required

    - by ramaperumal
    I have created the policy file in Tripwire and also I have created the rules as well mentioned below: /opt/jboss/server/gis/conf -> $(SEC_CONFIG) +aipm +c+g+a+i+s+t+u+l+M; /usr/local/gtech/eseries/ -> $(SEC_CONFIG) +a+c+g+i+s+t+u+l+M ; After running the integrity check the output should be a(Access timestamp),c (Inode timestamp (create/modify),g (File owner's group ID),i (Inode number),s (File size),t (time stamp),u (File owner's user ID),l(File is increasing in size (a "growing file"),M (MD5 hash value). I am getting the output as below: [root@xxsi1242 tripwire]# tripwire --check Parsing policy file: /etc/tripwire/tw.pol *** Processing Unix File System *** Performing integrity check... Wrote report file: /var/lib/tripwire/report/xxsi1242.gtk.gtech.com-20131106-053812.twr Open Source Tripwire(R) 2.4.1 Integrity Check Report Report generated by: root Report created on: Wed 06 Nov 2013 05:38:12 AM EST Database last updated on: Wed 06 Nov 2013 05:31:17 AM EST =============================================================================== Report Summary: =============================================================================== Host name: xxsi1242.gtk.gtech.com Host IP address: 156.24.65.171 Host ID: None Policy file used: /etc/tripwire/tw.pol Configuration file used: /etc/tripwire/tw.cfg Database file used: /var/lib/tripwire/xxsi1242.gtk.gtech.com.twd Command line used: tripwire --check =============================================================================== Rule Summary: =============================================================================== ------------------------------------------------------------------------------- Section: Unix File System ------------------------------------------------------------------------------- Rule Name Severity Level Added Removed Modified --------- -------------- ----- ------- -------- Invariant Directories 66 0 0 0 Temporary directories 33 0 0 0 * Tripwire Data Files 100 0 0 1 Tech Stack 100 0 0 0 User binaries 66 0 0 0 Tripwire Binaries 100 0 0 0 * CLPS bins 100 0 0 2 CLPS Configuration files 100 0 0 0 ESCommon 100 0 0 0 Shell Binaries 100 0 0 0 OS executables and libraries 100 0 0 0 Security Control 100 0 0 0 ESCommon Configuration 100 0 0 0 (/etc/gtech/escommon) Total objects scanned: 12358 Total violations found: 3 =============================================================================== Object Summary: =============================================================================== ------------------------------------------------------------------------------- # Section: Unix File System ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Rule Name: Tripwire Data Files (/etc/tripwire/tw.pol) Severity Level: 100 ------------------------------------------------------------------------------- Modified: "/etc/tripwire/tw.pol" ------------------------------------------------------------------------------- Rule Name: CLPS bins (/opt/jboss/server) Severity Level: 100 ------------------------------------------------------------------------------- Modified: "/opt/jboss/server/esapps1/data/hypersonic/localDB.lck" "/opt/jboss/server/gis/data/hypersonic/localDB.lck" =============================================================================== Error Report: =============================================================================== No Errors ------------------------------------------------------------------------------- *** End of report *** Note: In the output I only am getting the files which are modified. I need the detail output for this. But unfortunately I am not getting what I expected. Please help me to proced further.

    Read the article

  • Problems with bash script, mysql inserts and launchd

    - by Armands
    ========= I am developing a automated system, which consists of 3 parts: mysql, bash and launchd. Bash script takes folders of work related stuff, zips, archives and puts info about them into database that is located on a local MAMP server. Everything works as expected when I run the script from terminal. But when I use Launchd to automatically run this script, it functions without errors and it does not put the values into database. I've tried to make logs of returned messages, but the logs end up being empty as the command has run the way it was supposed to. Any help would be appreciated! .plist contents <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>com.adevo.ari.zip</string> <key>ProgramArguments</key> <array> <string>/Volumes/Archive-Plus/B-ARCHIVE-PLUS/ZZ_UTILITY_FOLDER/Compress.sh</string> </array> <key>Nice</key> <integer>1</integer> <key>StartInterval</key> <integer>120</integer> <key>RunAtLoad</key> <true/> </dict> </plist> I made this .plist file just by searching the web.

    Read the article

  • Log Shipping breaking daily on SQL Server 2005

    - by IT2
    I am facing a somewhat serious problem with Log Shipping on SQL Server 2005 and I am having trouble to correct it, so I will try some help from SF's experts. I have a Windows 2003 Server (PROD) that ships transactional log backups to another two servers: STAND1: Windows 2003 Server with SQL Server 2005. STAND2: Windows 2008 R2 Server with SQL Server 2005. The problem is that Log Shipping to STAND2 is breaking for ~ 90 minutes some times of the day and returning back without intervention. The breaking occur at times when the backup file is larger (after reindexing, etc). I can see the message below logged on the COPY job: *** Error: The specified network name is no longer available The copy agent was breaking dozens times a day only to STAND2 server, and after the changes below "only" breaks ~ two times a day: The frequency of the backup job was changed from 5 minutes to 10 minutes. Instead of backing up the 4 databases to the same folder, the log backups are now saved on separated folders for each database. The backup job doesn't run 24hs now, and only for 14 hours a day, when people are working on the database. I configured the SQL Server instances on the three servers to limit the memory, leaving more memory to the OS. Now I don't know what to do. Any help will be much appreciated! Thanks!

    Read the article

  • SQL Server Offsite Backups

    - by Eric Maibach
    We have about !TB of SQL Server databases, and these databases generate about 200GB of data changes each day. Up to this point we have been doing Weekly full backups, daily diff backups, and hourly transaction log backups. The full and diff backups are backed up to tape and taken offsite each day. We have been trying to move away from tapes, and our IT department purchased a Barracuda Backup device that backups up data and then sends it offsite using our internet connection. I have been trying to get this to work for our SQL Server backups, and have ran into a number of problems. I normally like to just use SQL Server to perform backups instead of trying to use a agent, so that is what I tried first. However the Barracuda device was not able to dedup these files very well, so it ended up being to much data to try to send offsite and to archive. I then tried installing the Barracuda agent and using it to backup the SQL Server databases. However the problem I am having there is that on some of the database servers I also have files that need backed up, and I cannot find a way to create seperate backup schedules for the file backups and the SQL Server backups. Barracuda only does full or transaction log backups. So if I want to do hourly transaction log backups I end up doing a file system backup every hour (which is not good), or if I only schedule the backups to run once a night I either have to do a full backup every night, or only do a transaction backup once a day. None of these scenarios are good options. My question is, how is everyone else getting their large SQL Server database backups offsite. Are you just using tape, or have you found a offsite backup device that works well? Is anybody else using Barracuda to backup their SQL Server databases? If you do, then how do you have it setup?

    Read the article

  • Windows authentication to SQL Server via IIS and PHP

    - by Jeff
    We're running a PHP 5.4 application on Server 2008 R2. We would like to connect to a SQL Server 2008 database, on a separate server, using Windows authentication (must be Windows authentication--the DB admins won't let us connect any other way). I have downloaded the SQL Server drivers for PHP and installed them. IIS is configured for Windows authentication, and anonymous authentication has been disabled. $_SERVER['AUTH_USER'] reports our currently logged on Windows account. In php.ini, we have set fastcgi.impersonate = 1. When we setup a connection using the following code from Microsoft: $serverName = "sqlserver\sqlserver"; $connectionInfo = array( "Database"=>"some_db"); /* Connect using Windows Authentication. */ $conn = sqlsrv_connect( $serverName, $connectionInfo); if( $conn === false ) { echo "Unable to connect.</br>"; die( print_r( sqlsrv_errors(), true)); } We are presented with the following error message: Unable to connect. Array ( [0] => Array ( [0] => 28000 [SQLSTATE] => 28000 [1] => 18456 [code] => 18456 [2] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [message] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. ) Is it possible to connect to SQL Server 2008 via PHP using Windows authentication? Are there any additional required settings we need to make on IIS, SQL Server, or any other component (like a domain controller)?

    Read the article

  • Walkthrough/guide building aplication server for multi tenant web app [on hold]

    - by Khalid Adisendjaja
    The web app will detect a subdomain such as tenant1.app.com, tenant2.app.com, etc to identify tenant environment, each tenant environment will have a different database credential (port,db name,etc) but still connecting to the same database server. Each tenant should use app.com for their main domain, using their own domain is prohibitted. Each tenant will have their own rest api endpoint such as tenant1.app.com/api/v1/xxxx, tenant2.app.com/api/v1/xxxx, tenant3.app.com/api/v1/xxxx I've come to a simple solution by setting a wildcard subdomain (*.app.com) on webserver Apache/Nginx vhost configuration file. I have googled so many concept for building a multi-tenant app server but still don't understand how to really done it, what is the right way to do it and what is actually required to do this task. So I've come to this questions, Do I need a proxy server, dns masking, etc.. How to monitor each tenants activity What about server performance, load balancing, and scalability How to setup ssl certificate for each tenant what about application cache for each tenant Is it reliable to use the setup for production etc ... I have a very litte experience on server infrastructure, so I'm looking for a DIY walkthrough, step by step guide, or sophisticate solution ready to implemented for production

    Read the article

  • why does mysql have so many more open and fragmented tables than tables in the DB?

    - by kswift
    I've been working making our database run a little smoother and had good results over the past week. But there are still some things I dont understand. For one thing, the database has 25 tables. But mysql status shows 512 are open: mysqladmin status Uptime: 212854 Threads: 1 Questions: 43041 Slow queries: 7 Opens: 2605 Flush tables: 1 Open tables: 512 Queries per second avg: 0.202 I've read that isam opens extra file descriptors and a few other reasons why the number of open tables might be higher than 25, but I am guessing that 512 is not a good thing. Any suggestions on why this might be or what I should be looking into? I've also been using mysqltuner and its been helpful. But it has consistently listed the number of fragmented tables at 207. In phpmyadmin I've selected all the tables and optimized them several times. It hasn't reduced the number of fragmented tables that mysqltuner reports. I think I am missing some important concept about how this all works. Does anyone have any suggestions to point me in the right direction or narrow down google searches or just generally help me be less clueless? Thanks!

    Read the article

  • ASP.NET Session State SQL Server 2008 R2 Freezes with High CPU Usage

    - by jtseng
    Our ASP.Net website uses SQL Server as the session state provider. We currently host the database on SQL Server 2005 since it does not play well on 2008 R2. We would like to know why, and how to fix it. hardware setup Our current session state server has SQL Server 2005 with the files hosted on a single local disk. It is one of our oldest servers since it has served us well, and we never felt the need to upgrade it. The database is about 2 GB holding 6000 sessions. (The sessions are a little big, but we need it.) We have another server with SQL Server 2008 R2 with a much faster CPU, much more RAM, and a much faster hard disk. situation One day, we have a huge surge in traffic. The transaction log growth on SQL Server freezes the server for 10's of seconds, allowing only a few requests through in minutes. So we load up the new server with ASPState with very large data and log files and point all of our applications to the new server. It chugs along fine for about 5 minutes, and then the CPU usage jumps up to 50% of the 16 cores that Standard Edition can use and freezes for 10's of seconds at a time. The files do not record any autogrowth events. The disk queue is nice and low. RAM usage is low. CPU usage on our old server has never been higher than 5%. What happened on the new server? Alternatively, I would like to hear success stories with ASP.NET session state server running on SQL Server 2008 R2 with an average write load of 30MB/sec with bursts up to 200MB/sec.

    Read the article

  • OpenLDAP replication fails, "syncrepl_entry: rid=666 be_modify failed (20)"

    - by Pavel
    I've configured a second host to replicate the main LDAP server via syncrepl in the slapd.conf: syncrepl rid=666 provider=ldaps://my-main-server.com type=refreshAndPersist searchBase="dc=Staff,dc=my-main-server,dc=com" filter="(objectClass=*)" scope=sub schemachecking=off bindmethod=simple binddn="cn=repadmin,dc=my-main-server,dc=com" credentials=mypassword When I restart slapd, it writes to /var/log/debug Jun 11 15:48:33 cluster-mn-04 slapd[29441]: @(#) $OpenLDAP: slapd 2.4.9 (Mar 31 2009 07:18:37) $ ^Ibuildd@yellow:/build/buildd/openldap2.3-2.4.9/debian/build/servers/slapd Jun 11 15:48:34 cluster-mn-04 slapd[29442]: slapd starting Jun 11 15:48:34 cluster-mn-04 slapd[29442]: null_callback : error code 0x14 Jun 11 15:48:34 cluster-mn-04 slapd[29442]: syncrepl_entry: rid=666 be_modify failed (20) Jun 11 15:48:34 cluster-mn-04 slapd[29442]: do_syncrepl: rid=666 quitting I've looked into the sources for the return code and found only #define LDAP_TYPE_OR_VALUE_EXISTS 0x14 in include/ldap.h. Anyway, I don't quite get what the error message means. Can you help me debugging this problem and figure out why the LDAP replication doesn't work? I've managed to put a "manual" copy via slapcat and slapadd into the database, but I'd like to sync automatically. UPDATE: "Solved" by removing /var/lib/ldap/* and re-importing the database with slapadd.

    Read the article

  • Copy files from sub directories into one directory.

    - by Derek Organ
    Ok I have a bunch of files in this file structure format. /backup/daily/database1/database1-2011-01-01.sql /backup/daily/database1/database1-2011-01-02.sql /backup/daily/database1/database1-2011-01-03.sql /backup/daily/database1/database1-2011-01-04.sql /backup/daily/database1/database1-2011-01-05.sql /backup/daily/database1/database1-2011-01-06.sql /backup/daily/database1/database1-2011-01-07.sql /backup/daily/anotherdb/anotherdb-2011-01-01.sql /backup/daily/anotherdb/anotherdb-2011-01-02.sql /backup/daily/anotherdb/anotherdb-2011-01-03.sql /backup/daily/anotherdb/anotherdb-2011-01-04.sql /backup/daily/anotherdb/anotherdb-2011-01-05.sql /backup/daily/anotherdb/anotherdb-2011-01-06.sql /backup/daily/anotherdb/anotherdb-2011-01-07.sql /backup/daily/stuff/stuff-2011-01-01.sql /backup/daily/stuff/stuff-2011-01-02.sql /backup/daily/stuff/stuff-2011-01-03.sql /backup/daily/stuff/stuff-2011-01-04.sql /backup/daily/stuff/stuff-2011-01-05.sql /backup/daily/stuff/stuff-2011-01-06.sql /backup/daily/stuff/stuff-2011-01-07.sql And there are lots lots more. ultimately I want to import all the 2011-01-07.sql files into my mysql database. This works for one mysql -u root -ppassword < /backup/daily/database1/database1-2011-01-07.sql That will nicely restore that database from this backupfile. I want to run a process where it does this for all databases. So my plan is to first cp all 2011-01-07 sql files into a tmp dir e.g. cp /backup/daily/*/*2011-01-07*.sql /tmp/all The command above unfortunately isn't working I get an error: cp: cannot stat ..... No such file or directory So can you guys help me out with this. For bonus points if you can tell me how to do the next step which is import all databases in one command doing one at a time that would be great too. I really want to do these in two separate steps because I need to delete a few sql files manually from the tmp dir before I run the restore command. So I need: 1) command to copy all 2011-01-07 sql files to a tmp dir 2) command to import all those files in that dir into mysql I know its possible to do in one but for lots of reasons I really would prefer to do it in two steps.

    Read the article

  • Mysqld increases the load on the CPU and drops after flush-tables

    - by mirage
    Help please advice on the issue. Normal load on the cpu 20-30% us + sy. After restoring the database files from the slave server (same version) began a periodic problem. mysql starts to load the cpu at 100% (us + sy grows proportionally). The queue is growing, everything slows down. But with mysqladmin flush-tables are normalized for a few hours. Dedicated linux server running mysql 2 x E5506 24Gb RAM, database size 50Gb. [OK] Currently running supported MySQL version 5.0.51a-24 + lenny4-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics --------------------------------------- ---- [-] Status: + Archive-BDB-Federated + InnoDB-ISAM-NDBCluster [-] Data in MyISAM tables: 33G (Tables: 1474) [-] Data in InnoDB tables: 1G (Tables: 4) [-] Data in MEMORY tables: 120K (Tables: 3) [-] Reads / Writes: 91% / 9% [-] Total buffers: 12.8M per thread and 7.1G global [OK] Maximum possible memory usage: 15.8G (66% of installed RAM) 4000 - 5500 rps key_buffer = 1536M max_allowed_packet = 2M table_cache = 4096 sort_buffer_size = 409584 read_buffer_size = 128K read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 500 query_cache_size = 100M thread_concurrency = 24 max_connections = 700 tmp_table_size = 4096M join_buffer_size = 4M max_heap_table_size = 4096M query_cache_limit = 1M low_priority_updates = 1 concurrent_insert = 2 wait_timeout = 30 server-id = 1 log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M innodb_buffer_pool_size = 1536M innodb_log_buffer_size = 4M innodb_flush_log_at_trx_commit = 2 How to solve the problem?

    Read the article

  • 24 Hours of PASS – first reflections

    - by Rob Farley
    A few days after the end of 24HOP, I find myself reflecting on it. I’m still waiting on most of the information. I want to be able to discover things like where the countries represented on each of the sessions, and things like that. So far, I have the feedback scores and the numbers of attendees. The data was provided in a PDF, so while I wait for it to appear in a more flexible format, I’ve pushed the 24 attendee numbers into Excel. This chart shows the numbers by time. Remember that we started at midnight GMT, which was 10:30am in my part of the world and 8pm in New York. It’s probably no surprise that numbers drooped a bit at the start, stayed comparatively low, and then grew as the larger populations of the English-speaking world woke up. I remember last time 24HOP ran for 24 hours straight, there were quite a few sessions with less than 100 attendees. None this time though. We got close, but even when it was 4am in New York, 8am in London and 7pm in Sydney (which would have to be the worst slot for attracting people), we still had over 100 people tuning in. As expected numbers grew as the UK woke up, and even more so as the US did, with numbers peaking at 755 for the “3pm in New York” session on SQL Server Data Tools. Kendra Little almost reached those numbers too, and certainly contributed the biggest ‘spike’ on the chart with her session five hours earlier. Of all the sessions, Kendra had the highest proportion of ‘Excellent’s for the “Overall Evaluation of the session” question, and those of you who saw her probably won’t be surprised by that. Kendra had one of the best ranked sessions from the 24HOP event this time last year (narrowly missing out on being top 3), and she has produced a lot of good video content since then. The reports indicate that there were nearly 8.5 thousand attendees across the 24 sessions, averaging over 350 at each one. I’m looking forward to seeing how many different people that was, although I do know that Wil Sisney managed to attend every single one (if you did too, please let me know). Wil even moderated one of the sessions, which made his feat even greater. Thanks Wil. I also want to send massive thanks to Dave Dustin. Dave probably would have attended all of the sessions, if it weren’t for a power outage that forced him to take a break. He was also a moderator, and it was during this session that he earned special praise. Part way into the session he was moderating, the speaker lost connectivity and couldn’t get back for about fifteen minutes. That’s an incredibly long time when you’re in a live presentation. There were over 200 people tuned in at the time, and I’m sure Dave was as stressed as I was to have a speaker disappear. I started chasing down a phone number for the speaker, while Dave spoke to the audience. And he did brilliantly. He started answering questions, and kept doing that until the speaker came back. Bear in mind that Dave hadn’t expected to give a presentation on that topic (or any other), and was simply drawing on his SQL expertise to get him through. Also consider that this was between midnight at 1am in Dave’s part of the world (Auckland, NZ). I would’ve been expecting just to welcome people, monitor questions, probably read some out, and in general, help make things run smoothly. He went far beyond the call of duty, and if I had a medal to give him, he’d definitely be getting one. On the whole, I think this 24HOP was a success. We tried a different platform, and I think for the most part it was a popular move. We didn’t ask the question “Was this better than LiveMeeting?”, but we did get a number of people telling us that they thought the platform was very good. Some people have told me I get a chance to put my feet up now that this is over. As I’m also co-ordinating a tour of SQLSaturday events across the Australia/New Zealand region, I don’t quite get to take that much of a break (plus, there’s the little thing of squeezing in seven SQL 2012 exams over the next 2.5 weeks). But I am pleased to be reflecting on this event rather than anticipating it. There were a number of factors that could have gone badly, but on the whole I’m pleased about how it went. A massive thanks to everyone involved. If you’re reading this and thinking you wish you could’ve tuned in more, don’t worry – they were all recorded and you’ll be able to watch them on demand very soon. But as well as that, PASS has a stream of content produced by the Virtual Chapters, so you can keep learning from the comfort of your desk all year round. More info on them at sqlpass.org, of course.

    Read the article

  • MySQL partition "full"?

    - by gdea73
    I have a server that runs Debian 6.2, with Apache, PHP5, and MySQL. Well, I hadn't done anything with MySQL at all so far, just Apache and PHP; I must have installed it (mysql-server) at some point along the line, and I decided to login to the database for the first time a couple days ago as I was considering using the database for a future website project. I noticed that the "root" user had a password, and I didn't recall having set one. My usual root password was incorrect. So I attempted to reset the password. sudo service mysql stop (stopped successfully) sudo /usr/bin/mysqld_safe --skip-grant-tables --skip-networking & started successfully, from what I can tell. However, mysql itself returns "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld,sock' (2)", and additionally sudo service mysql start returns "/etc/init.d/mysql: ERROR: The partition with /var/lib/mysql is too full! ... failed!" df -h tells me that / is 26% used, a 20GB partition, and /home, roughly 900GB, has only 5% usage. On a potentially related note, I've been experiencing random hangs since I noticed this problem, my tty2 randomly froze several times while idle, and the entire system is suddenly unstable. gnome-terminal also does not open. (Gnome-terminal apparently works now, disregard that part, but the server is still being somewhat unstable, I randomly lost connection when I was SSHed into it from my laptop, twice now.)

    Read the article

  • PostgreSQL pg_hba.conf with "password" auth wouldn't work with PHP pg_connect?

    - by tftd
    I've recently experimented with the settings in pg_hba.conf. I read the PostgreSQL documentation and I though that the "password" auth method is what I want. There are many people that have access to the server PostgreSQL is working on so I don't want the "trust" method. So I changed it. But then PHP stopped working with the database. The message I get is "Warning: pg_connect(): Unable to connect to PostgreSQL server: FATAL: password authentication failed for user "myuser" in /my/path/to/connection/class.php on line 35". It is kind of strange because I can connect via phppgadmin without any problems and also I can connect from my home computer with psql - again without any problems. This is my pg_hba.conf: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all password # IPv4 local connections: host all all 127.0.0.1/32 password # IPv6 local connections: host all all ::1/128 password The connection string I'm using with pg_conenct is: $connect_string = "host=localhost port=5432 dbname=mydbname user=auser password=apassword"; $dbConnection = pg_connect($connection_string); Does anybody know why is this happening ? Did I misconfigured something ?

    Read the article

  • User authentication -- username mismatch in IIS in ASP.NET application

    - by Cory Larson
    Last week, an employee's Active Directory username was changed (or a new one was created for them). For the purposes of this example, let's assume these usernames: Old: Domain\11111 New: Domain\22222 When this user now logs in using their new username, and attempts to browse to any one of a number of ASP.NET applications using only Windows Authentication (no Anonymous enabled), the system authenticates but our next layer of database-driven permissions prevents them from being authorized. We tracked it down to a mismatch of usernames between their logon account and who IIS thinks they are. Below are the outputs of several ASP.NET variables from apps running in a Windows 2008 IIS7.5 environment: Request.ServerVariables["AUTH_TYPE"]: Negotiate Request.ServerVariables["AUTH_USER"]: Domain\11111 Request.ServerVariables["LOGON_USER"]: Domain\22222 Request.ServerVariables["REMOTE_USER"]: Domain\11111 HttpContext.Current.User.Identity.Name: Domain\11111 System.Threading.Thread.CurrentPrincipal.Identity.Name: Domain\11111 From the above, I can see that only the LOGON_USER server variable has the correct value, which is the account the user used to log on to their machine. However, we use the "AUTH_USER" variable for looking up the database permissions. In a separate testing environment (completely different server: Windows 2003, IIS6), all of the above variables show "Domain\22222". So this seems to be a server-specific issue, like the credentials are somehow getting cached either on their machine or on the server (the former seems more plausible). So the question is: how do I confirm whether it's the user's machine or the server that is botching the request? How should I go about fixing this? I looked at the following two resources and will be giving the first one a try shortly: http://www.interworks.com/blogs/jvalente/2010/02/02/removing-saved-credentials-passwords-windows-xp-windows-vista-or-windows-7 http://stackoverflow.com/questions/2325005/classic-asp-request-servervariableslogon-user-returning-wrong-username/5299080#5299080 Thanks.

    Read the article

  • debugging connection to mysql from python script using MySQLdb

    - by timpone
    I am a python newbie and have a python 2.5 script that is using MySQLdb to connect on OS X 10.5.8. I haven't been able to succesfully connect to the database of interest with this. However, I am able to connect using php's mysqli and also via the mysql cli interface. I get the error: File "build/bdist.macosx-10.5-i386/egg/MySQLdb/connections.py", line 188, in __init__ _mysql_exceptions.OperationalError: (1045, "Access denied for user 'arc_development'@'localhost' (using password: YES)") On my linux box which has the same mysql perms, the script works fine logging in. On my OS X laptop, I am able to create a database named test_python which bypasses mysql authentication scheme. This makes me think that issues like 32bit / 64bit incompatabilities aren't occuring. If I turn on the query log, I get access denied: 100610 20:56:55 4 Connect Access denied for user 'arc_development'@'localhost' (using password: YES) I'm a little bit at a loss to what to do next. Is there any way I can specify in the general log or binary log to get the actual password set on the connection string? How about writing out from connections.py file the value (although not sure how I'd do that)? thanks

    Read the article

  • SQL Server becomes slow after restart

    - by Tobi DM
    I already posted this one on stackoverflow but someone gave me the hint to that I might have more luck on serverfault. We use SQL Server 2005 on an Windwos Server 2008. Ther Server has 48 GB RAM. SQL Server is configured to use 40 GB RAM. There is only one database hosted (About 70 GB). The only app beside SQL Server is our App-Server which connects the clients to the database. Now we encounter the following problem: After a restart of the server our the performance is great. The server grabs the 40 GB RAM wich it is allowed to and then runs fast as hell. But after about 4 weeks the system becomes slower and slower. The execution of statements (seen in the profiler) is raising slowly. But I cannot see that there is something going wrong on the server. CPU usage is at about 20% I/O also seems to be no Problem The process monitor does also not show that there are strange apps or something like that. Eventlog does also have no interessting messages No open transactions or blockings to see We do not use cursors in our app We tried already the following things without effect: Droped the cache by using the statements DBCC FreeProcCache DBCC FREESYSTEMCACHE('ALL') DBCC DropCleanbuffers Restarted the Appserver we are using. Restart the sql server service But nothing did help exept restarting the whole server. Any ideas?

    Read the article

  • PHP cannot connect to MySQL

    - by yogal
    Hello, I recently installed Apache 2 + PHP 5.3.1 + MySQL 5.1.44 on my Windows 7 64bit machine following this guide: http://sleeplessgeek.blogspot.com/2010/01/setting-up-apache-php-mysql-phpmyadmin.html It all went fine, php is working great (even with XDebug) but I cannot connect to mysql server. A simple script I wrote to test connection (yes, root has no pass): $username = "root"; $password = ""; $database = "test"; $hostname = "localhost"; $conn = mysql_connect($hostname, $username, $password) or die("Unable to connect to MySQL Database!!"); It prints this error after 60sec of timeout: Warning: mysql_connect() [function.mysql-connect]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. I can connect to mysql using cmdmysql -h localhost -u root Services are working properly. There also seems to be a problem with PhpMyAdmin (using 3.2.5). As soon as I type user and pass the page loads and turns blank (content-lenght in headers is 0 but status code is 302 Found). Looks like something wrong with cookies (my auth method). I hope someone has a clue, it has to be something dumb simple I missed. Thanks in advance.

    Read the article

  • SQL SERVER 2005 with Windows 7 Problems

    - by azamsharp
    First of all I restored the database from other server and now all the stored procedures are named as [azamsharp].[usp_getlatestposts]. I think [azamsharp] is prefixed since it was the user on the original server. Now, on my local machine this does not run. I don't want the [azamsharp] prefix with all the stored procedures. Also, when I right click on the Sproc I cannot even see the properties option. I am running the SQL SERVER 2005 on Windows 7. UPDATE: The weird thing is that if I access the production database from my machine I can see the properties option. So, there is really something wrong with Windows 7 security. UPDATE 2: When I ran the orphan users stored procedure it showed two users "azamsharp" and "dbo1". I fixed the "azamsharp" user but "dbo1" is not getting fixed. When I run the following script: exec sp_change_users_login 'update_one', 'dbo1', 'dbo1' I get the following error: Msg 15291, Level 16, State 1, Procedure sp_change_users_login, Line 131 Terminating this procedure. The Login name 'dbo1' is absent or invalid.

    Read the article

< Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >