linux command - Page 653

Can I have a macro in Visual Studio 2005 call a DOS command and redirect the output to a file?

- by Mark

I'd like to have a macro in Visual Studio 2005 that calls a DOS command and redirects the output (stdout and stderr) to a file. Just calling the command and "" redirecting it will not capture stderr, so there are two parts to this: calling a DOS command capturing both stderr and stdout to a file during that call I'd then like to open this file in Visual Studio after the command completes. I'm new to Visual Studio 2005 macro writing, and VB/VBA, so that's the kind of help that I'm looking for. Thanks, Mark

Read the article

Failing Sata HDD

- by DaveCol

I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Read the article

UppercuT v1.0 and 1.1–Linux (Mono), Multi-targeting, SemVer, Nitriq and Obfuscation, oh my!

- by Robz / Fervent Coder

Recently UppercuT (UC) quietly released version 1 (in August). I’m pretty happy with where we are, although I think it’s a few months later than I originally planned. I’m glad I held it back, it gave me some more time to think about some things a little more and also the opportunity to receive a patch for running builds with UC on Linux. We also released v1.1 very recently (December). UppercuT v1 Builds On Linux Perhaps the most significant changes to UC going v1 is that it now supports builds on Linux using Mono! This is thanks mostly to Svein Ackenhausen for the patches and working with me on getting it all working while not breaking the windows builds! This means you can use mono on Windows or Linux. Notice the shell files to execute with Linux that come as part of UC now. Multi-Targeting Perhaps one of the hardest things to do that requires an automated build is multi-targeting. At v1 this is early, and possibly prone to some issues, but available. We believe in making everything stupid simple, so it’s as simple as adding a comma to the microsoft.framework property. i.e. “net-3.5, net-4.0” to suddenly produce both framework builds. When you build, this is what you get (if you meet each framework’s requirements): At this time you have to let UC override the build location (as it does by default) or this will not work. Semantic Versioning By now many of you have been using UppercuT for awhile and have watched how we have done versioning. Many of you who use git already know we put the revision hash in the informational/product version as the last octet. At v1, UppercuT has adopted the semantic versioning scheme. What does that mean? This is a short read, but a good one: http://SemVer.org SemVer (Semantic Versioning) is really using versioning what it was meant for. You have three octets. Major.Minor.Patch as in 1.1.0. UC will use three different versioning concepts, one for the assembly version, one for the file version, and one for the product version. All versions - The first three octects of the version are owned by SemVer. Major.Minor.Patch i.e.: 1.1.0 Assembly Version - The assembly version would much closer follow SemVer. Last digit is always 0. Major.Minor.Patch.0 i.e: 1.1.0.0 File Version - The file version occupies the build number as the last digit. Major.Minor.Patch.Build i.e.: 1.1.0.2650 Product/Informational Version - The last octect of your product/informational version is the source control revision/hash. Major.Minor.Patch.RevisionOrHash i.e. (TFS/SVN): 1.1.0.235 i.e. (Git/HG): 1.1.0.a45ace4346adef0 SemVer is not on by default, the passive versioning scheme is still in effect. Notice that version.use_semanticversioning has been added to the UppercuT.config file (and version.patch in support of the third octet): Gems Support Gems support was added at v1. This will probably be deprecated as some point once there is an announced sunset for Nu v1. Application gems may keep it around since there is no alternative for that yet though (CoApp would be a possible replacement). Nitriq Support Nitriq is a code analysis tool like NDepend. It’s built by Mr. Jon von Gillern. It uses LINQ query language, so you can use a familiar idiom when analyzing your code base. It’s a pretty awesome tool that has a free version for those looking to do code analysis! To use Nitriq with UC, you are going to need the console edition. To take advantage of Nitriq, you just need to update the location of Nitriq in the config: Then add the nitriq project files at the root of your source. Please refer to the Nitriq documentation on how these are created. UppercuT v1.1 Obfuscation One thing I started looking into was an easy way to obfuscate my code. I came across EazFuscator, which is both free and awesome. Plus the GUI for it is super simple to use. How do you make obfuscation even easier? Make it a convention and a configurable property in the UC config file! And the code gets obfuscated! Closing Definitely get out and look at the new release. It contains lots of chocolaty (sp?) goodness. And remember, the upgrade path is almost as simple as drag and drop!

Read the article

How to compile a C++ source code written for Linux/Unix on Windows Vista (code given)

- by HTMZ

I have a c++ source code that was written in linux/unix environment by some other author. It gives me errors when i compile it in windows vista environment. I am using Bloodshed Dev C++ v 4.9. please help. #include <iostream.h> #include <map> #include <vector> #include <string> #include <string.h> #include <strstream> #include <unistd.h> #include <stdlib.h> using namespace std; template <class T> class PrefixSpan { private: vector < vector <T> > transaction; vector < pair <T, unsigned int> > pattern; unsigned int minsup; unsigned int minpat; unsigned int maxpat; bool all; bool where; string delimiter; bool verbose; ostream *os; void report (vector <pair <unsigned int, int> > &projected) { if (minpat > pattern.size()) return; // print where & pattern if (where) { *os << "<pattern>" << endl; // what: if (all) { *os << "<freq>" << pattern[pattern.size()-1].second << "</freq>" << endl; *os << "<what>"; for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first; } else { *os << "<what>"; for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first << delimiter << pattern[i].second; } *os << "</what>" << endl; // where *os << "<where>"; for (unsigned int i = 0; i < projected.size(); i++) *os << (i ? " " : "") << projected[i].first; *os << "</where>" << endl; *os << "</pattern>" << endl; } else { // print found pattern only if (all) { *os << pattern[pattern.size()-1].second; for (unsigned int i = 0; i < pattern.size(); i++) *os << " " << pattern[i].first; } else { for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first << delimiter << pattern[i].second; } *os << endl; } } void project (vector <pair <unsigned int, int> > &projected) { if (all) report(projected); map <T, vector <pair <unsigned int, int> > > counter; for (unsigned int i = 0; i < projected.size(); i++) { int pos = projected[i].second; unsigned int id = projected[i].first; unsigned int size = transaction[id].size(); map <T, int> tmp; for (unsigned int j = pos + 1; j < size; j++) { T item = transaction[id][j]; if (tmp.find (item) == tmp.end()) tmp[item] = j ; } for (map <T, int>::iterator k = tmp.begin(); k != tmp.end(); ++k) counter[k->first].push_back (make_pair <unsigned int, int> (id, k->second)); } for (map <T, vector <pair <unsigned int, int> > >::iterator l = counter.begin (); l != counter.end (); ) { if (l->second.size() < minsup) { map <T, vector <pair <unsigned int, int> > >::iterator tmp = l; tmp = l; ++tmp; counter.erase (l); l = tmp; } else { ++l; } } if (! all && counter.size () == 0) { report (projected); return; } for (map <T, vector <pair <unsigned int, int> > >::iterator l = counter.begin (); l != counter.end(); ++l) { if (pattern.size () < maxpat) { pattern.push_back (make_pair <T, unsigned int> (l->first, l->second.size())); project (l->second); pattern.erase (pattern.end()); } } } public: PrefixSpan (unsigned int _minsup = 1, unsigned int _minpat = 1, unsigned int _maxpat = 0xffffffff, bool _all = false, bool _where = false, string _delimiter = "/", bool _verbose = false): minsup(_minsup), minpat (_minpat), maxpat (_maxpat), all(_all), where(_where), delimiter (_delimiter), verbose (_verbose) {}; ~PrefixSpan () {}; istream& read (istream &is) { string line; vector <T> tmp; T item; while (getline (is, line)) { tmp.clear (); istrstream istrs ((char *)line.c_str()); while (istrs >> item) tmp.push_back (item); transaction.push_back (tmp); } return is; } ostream& run (ostream &_os) { os = &_os; if (verbose) *os << transaction.size() << endl; vector <pair <unsigned int, int> > root; for (unsigned int i = 0; i < transaction.size(); i++) root.push_back (make_pair (i, -1)); project (root); return *os; } void clear () { transaction.clear (); pattern.clear (); } }; int main (int argc, char **argv) { extern char *optarg; unsigned int minsup = 1; unsigned int minpat = 1; unsigned int maxpat = 0xffffffff; bool all = false; bool where = false; string delimiter = "/"; bool verbose = false; string type = "string"; int opt; while ((opt = getopt(argc, argv, "awvt:M:m:L:d:")) != -1) { switch(opt) { case 'a': all = true; break; case 'w': where = true; break; case 'v': verbose = true; break; case 'm': minsup = atoi (optarg); break; case 'M': minpat = atoi (optarg); break; case 'L': maxpat = atoi (optarg); break; case 't': type = string (optarg); break; case 'd': delimiter = string (optarg); break; default: cout << "Usage: " << argv[0] << " [-m minsup] [-M minpat] [-L maxpat] [-a] [-w] [-v] [-t type] [-d delimiter] < data .." << endl; return -1; } } if (type == "int") { PrefixSpan<unsigned int> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); }else if (type == "short") { PrefixSpan<unsigned short> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else if (type == "char") { PrefixSpan<unsigned char> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else if (type == "string") { PrefixSpan<string> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else { cerr << "Unknown Item Type: " << type << " : choose from [string|int|short|char]" << endl; return -1; } return 0; }

Read the article

How to install gspca on ubuntu 12.04?

- by sam

I tried to install gspca to run Orite webcam. But I failed to install gspca on ubuntu 12.04 64 bits. It lost a lot of headers,here are my instructions but failed. wget http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz tar zxvf gspcav1-20071224.tar.gz cd gspcav1-20071224/ sudo ./gspca_build sudo touch /usr/src/linux-headers-3.2.0-25-generic/include/linux/config.h sudo mkdir /usr/src/linux-headers-3.2.0-25-generic/include/asm sudo touch /usr/src/linux-headers-3.2.0-25-generic/include/asm/semaphore.h sudo touch /usr/src/linux-headers-3.2.0-25-generic/include/linux/videodev.h sudo touch /usr/src/linux-headers-3.2.0-25-generic/include/linux/smp_lock.h How to solve it? Thank you~

Read the article

12.04 upgrade broke grub? (not wubi related)

- by kaare

I just updated from 11.10 to 12.04, with no major problems (it took a while to get past a request to restart ssh, mysql and some other services, but I did no fiddling by myself, everything was done by the installer). However, after restarting, grub can't do anything. Picking the new linux installation (first entry), I just get error: no such partition error: no such partition error: no such partition and picking the recovery-version just gives 5 lines instead of 3. I have windows 7 installed on a different drive, and can run it by booting from that drive instead. Picking it from the grub menu gives the same error as above (can't remember how many lines, though). I'll be honest and say that I don't remember if win 7 could be booted from grub before the update, though. In short, nothing on the grub menu works. any solutions? The grub menu changed appearance - before it was on a purple background, small letters, now it's white-on-black, big letters, looking very basic. The original installation was from a usb-drive, and I hadn't heard about wubi until I started googling this problem, so I doubt there's any connection. I really hope there are some grub-savvy people out there :) EDIT: ok. so, I made a bootable usb, and am running from that right now. when I ran the bootinfoscript, it warned me that "gawk" could not be found, using "busybox awk" instead. This may lead to unreliable results. just so you know. The contents of RESULTS.txt are: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc. sda1: __________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /bootmgr /ntldr /NTDETECT.COM sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sdb3 and looks at sector 375893584 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb4: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdc1: __________________________________________ File system: ntfs Boot sector type: SYSLINUX 4.06 4.06-pre1 Boot sector info: Syslinux looks at sector 4649656 of /dev/sdc1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. No errors found in the Boot Parameter Block. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 240,974 240,912 de Dell Utility /dev/sda2 241,664 21,213,183 20,971,520 7 NTFS / exFAT / HPFS /dev/sda3 * 21,213,184 483,151,863 461,938,680 7 NTFS / exFAT / HPFS /dev/sda4 483,151,872 488,394,751 5,242,880 f W95 Extended (LBA) /dev/sda5 483,153,920 488,394,751 5,240,832 dd Dell Media Direct Drive: sdb _______________________________________ Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 63 345,886,749 345,886,687 7 NTFS / exFAT / HPFS /dev/sdb2 345,888,768 361,510,911 15,622,144 82 Linux swap / Solaris /dev/sdb3 * 361,510,912 390,807,786 29,296,875 83 Linux /dev/sdb4 390,809,600 488,394,751 97,585,152 83 Linux Drive: sdc _______________________________________ Disk /dev/sdc: 8015 MB, 8015282176 bytes 255 heads, 63 sectors/track, 974 cylinders, total 15654848 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 * 2,048 15,652,863 15,650,816 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07D8-0411 vfat DellUtility /dev/sda2 E2765BBC765B9061 ntfs RECOVERY /dev/sda3 98DC5E54DC5E2D2E ntfs OS /dev/sda5 7061-9DF5 vfat MEDIADIRECT /dev/sdb1 01CBBB4C3374C3B0 ntfs Data1 /dev/sdb2 1ca45f3f-f888-43d1-8137-02699597189a swap /dev/sdb3 6bc1b599-ad4b-403c-a155-a5bc81211f5e ext4 /dev/sdb4 58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 /dev/sdc1 0C02B64402B63316 ntfs PENDRIVE ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sdb4 /media/58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sdc1 /cdrom fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096) ================================ sda5/boot.ini: ================================ [boot loader] timeout=0 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Embedded" /fastdetect /KERNEL=NTOSBOOT.EXE /maxmem=1024 =========================== sdb3/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, with Linux 3.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.0.0-19-generic ...' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set=root 98DC5E54DC5E2D2E chainloader +1 } menuentry "Microsoft Windows XP Embedded (on /dev/sda5)" --class windows --class os { insmod part_msdos insmod fat set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root 7061-9DF5 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb3/etc/fstab: ================================ # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb3 during installation UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e / ext4 errors=remount-ro 0 1 # /home was on /dev/sdb4 during installation UUID=58e2b257-8608-4b11-b20b-dc162bb80b62 /home ext4 defaults,user_xattr 0 2 # swap was on /dev/sdb2 during installation UUID=1ca45f3f-f888-43d1-8137-02699597189a none swap sw 0 0 =================== sdb3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.0.0-19-generic 2 = boot/initrd.img-3.2.0-24-generic 2 = boot/vmlinuz-3.0.0-19-generic 2 = boot/vmlinuz-3.2.0-24-generic 1 = vmlinuz 1 = vmlinuz.old 2 =========================== sdc1/boot/grub/grub.cfg: =========================== if loadfont /boot/grub/font.pf2 ; then set gfxmode=auto insmod efi_gop insmod efi_uga insmod gfxterm terminal_output gfxterm fi set menu_color_normal=white/black set menu_color_highlight=black/light-gray menuentry "Try Ubuntu without installing" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- initrd /casper/initrd.lz } menuentry "Install Ubuntu" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- initrd /casper/initrd.lz } menuentry "Check disc for defects" { set gfxpayload=keep linux /casper/vmlinuz boot=casper integrity-check quiet splash -- initrd /casper/initrd.lz } ========================= sdc1/syslinux/syslinux.cfg: ========================== # D-I config version 2.0 include menu.cfg default vesamenu.c32 prompt 0 timeout 50 # If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment! # ui gfxboot bootlogo =================== sdc1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) ?? = ?? boot/grub/grub.cfg 0 ================= sdc1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) ?? = ?? ldlinux.sys 1 ?? = ?? syslinux/chain.c32 1 ?? = ?? syslinux/gfxboot.c32 1 ?? = ?? syslinux/syslinux.cfg 0 ?? = ?? syslinux/vesamenu.c32 1 ============== sdc1: Version of COM32(R) files used by Syslinux: =============== syslinux/chain.c32 : COM32R module (v4.xx) syslinux/gfxboot.c32 : COM32R module (v4.xx) syslinux/vesamenu.c32 : COM32R module (v4.xx) =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in ./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected

Read the article

Silabs cp2102 driver problem

- by Zxy

I downloaded appropriate driver from its own site, unzipped it and then tried to install it. But: root@ghostrider:/home/zero/Downloads# tar xvf cp210x-3.1.0.tar.gz cp210x-3.1.0/ cp210x-3.1.0/COPYING cp210x-3.1.0/cp210x/ cp210x-3.1.0/cp210x-3.1.0.spec cp210x-3.1.0/cp210x/.rpmmacros cp210x-3.1.0/cp210x/configure cp210x-3.1.0/cp210x/cp210x.c cp210x-3.1.0/cp210x/cp210x.h cp210x-3.1.0/cp210x/cp210xuniversal.c cp210x-3.1.0/cp210x/cp210xuniversal.h cp210x-3.1.0/cp210x/installmod cp210x-3.1.0/cp210x/Makefile24 cp210x-3.1.0/cp210x/Makefile26 cp210x-3.1.0/cp210x/rpmmacros24 cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0/cp210x/Rules.make cp210x-3.1.0/INSTALL cp210x-3.1.0/makerpm cp210x-3.1.0/PACKAGE-LIST cp210x-3.1.0/README cp210x-3.1.0/RELEASE-NOTES cp210x-3.1.0/REPORTING-BUGS cp210x-3.1.0/rpm/ cp210x-3.1.0/rpm/brp-java-repack-jars cp210x-3.1.0/rpm/brp-python-bytecompile cp210x-3.1.0/rpm/check-rpaths cp210x-3.1.0/rpm/check-rpaths-worker root@ghostrider:/home/zero/Downloads# cd cp210x-3.1.0 root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# ls COPYING cp210x-3.1.0.spec makerpm README REPORTING-BUGS cp210x INSTALL PACKAGE-LIST RELEASE-NOTES rpm root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# run ./makerpm No command 'run' found, did you mean: Command 'zrun' from package 'moreutils' (universe) Command 'runq' from package 'exim4-daemon-heavy' (main) Command 'runq' from package 'exim4-daemon-light' (main) Command 'runq' from package 'sendmail-bin' (universe) Command 'grun' from package 'grun' (universe) Command 'qrun' from package 'torque-client' (universe) Command 'qrun' from package 'torque-client-x11' (universe) Command 'lrun' from package 'lustre-utils' (universe) Command 'rn' from package 'trn' (multiverse) Command 'rn' from package 'trn4' (multiverse) Command 'rup' from package 'rstat-client' (universe) Command 'srun' from package 'slurm-llnl' (universe) run: command not found root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# sudo ./makerpm + uname -r + kernel_release=3.2.0-25-generic-pae + pwd + current_dir=/home/zero/Downloads/cp210x-3.1.0 + export current_dir + uname -r + KVER=3.2.0-25-generic-pae + echo 3.2.0-25-generic-pae + awk -F . -- { print $1 } + KVER1=3 + echo 3.2.0-25-generic-pae + awk -F . -- { print $2 } + KVER2=2 + sed -e s/3\.2\.//g + echo 3.2.0-25-generic-pae + KVER3=0-25-generic-pae + [ -f /root/.rpmmacros ] + echo 2 2 + [ 2 == 4 ] ./makerpm: 25: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 29: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /root/.rpmmacros + d=/var/tmp/silabs + [ ! -d /var/tmp/silabs ] + mkdir /var/tmp/silabs + cd /var/tmp/silabs + r=/var/tmp/silabs/rpmbuild + o=cp210x-3.1.0 + s=/var/tmp/silabs/rpmbuild/SOURCES + spec=cp210x-3.1.0.spec + rm -rf /var/tmp/silabs/rpmbuild + mkdir rpmbuild + mkdir rpmbuild/SOURCES + mkdir rpmbuild/SRPMS + mkdir rpmbuild/SPECS + mkdir rpmbuild/BUILD + mkdir rpmbuild/RPMS + cd /var/tmp/silabs/rpmbuild/SOURCES + rm -rf cp210x-3.1.0 + mkdir cp210x-3.1.0 + cp -r /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile24 /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile26 /home/zero/Downloads/cp210x- 3.1.0/cp210x/Rules.make /home/zero/Downloads/cp210x-3.1.0/cp210x/configure /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210x.c /home/zero/Downloads/cp210x- 3.1.0/cp210x/cp210x.h /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.c /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.h /home/zero/Downloads/cp210x- 3.1.0/cp210x/installmod /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0 + echo 2 2 + [ 2 == 4 ] ./makerpm: 64: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 68: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24 cp210x-3.1.0/.rpmmacros cp: cannot stat `/home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24': No such file or directory + MyCopy=0 + rm -f cp210x-3.1.0.tar + rm -f cp210x-3.1.0.tar.gz + tar -cf cp210x-3.1.0.tar cp210x-3.1.0 + gzip cp210x-3.1.0.tar + cp /home/zero/Downloads/cp210x-3.1.0/cp210x-3.1.0.spec /var/tmp/silabs/rpmbuild/SPECS + rpmbuild -ba /var/tmp/silabs/rpmbuild/SPECS/cp210x-3.1.0.spec ./makerpm: 121: ./makerpm: rpmbuild: not found + [ -f /root/.rpmmacros.cp210x ] How may I solve my problem? Thanks

Read the article

The Next RAC, ASM and Linux Forum. May 4, 2010 Beit HP Raanana

- by alejandro.vargas

The next RAC, ASM and Linux forum will take place next week, you are still on time to register : Israel Oracle Users Group RAC,ASM and Linux Forum This time we will have a panel formed by Principal Oracle Advanced Customer Services Engineers and RAC experts Galit Elad and Nickita Chernovski and Senior Oracle Advanced Customer Services Engineers and RAC experts Roy Burstein and Dorit Noga. They will address the subject: 5 years of experience with RAC at Israeli Customers, lessons learned. It is a wonderful opportunity to meet with the people that is present at most major implementations and helped to solve all major issues along the last years. In addition we will have 2 most interesting Customer Presentations: Visa Cal DBA Team Leader Harel Safra will tell about their experience with scalability using standard Linux Servers for their mission critical data warehouse. Bank Discount Infrastructure DBA Uril Levin, who is in charge of the Bank Backup and Recovery Project, will speak about their Corporate Backup Solution using RMAN; that includes an end to end solution for VLDBS and mission critical databases. One of the most interesting RMAN implementations in Israel. This time I will not be able to attend myself as I'm abroad on business, Galit Elad will greet you and will lead the meeting. I'm sure you will enjoy a very, very interesting meeting. Best Regards Alejandro

Read the article

System will not boot without USB thumb drive inserted

- by agent154

I've had this issue before when trying out Linux Mint, but I was unable to get any assistance. I was then lead to believe that it was a problem related to Mint, and not grub. I installed Ubuntu 12.04 tonight on a second partition alongside Windows 7. I installed from a USB stick, and everything went peachy until I rebooted without the stick in my tower. It now says: error: no such device: 20cec6ca-4024-4237-84c3-2dba3c851497 grub rescue > I've verified via ls -l /dev/disk/by-uuid that my drive where Ubuntu is installed matches the UUID that supposedly doesn't exist. The UUID of my thumb drive when inserted happens to be 06B3-9C68. There is no mention of my USB drive's UUID anywhere in /boot/grub/grub.cfg I've also tried to re-install GRUB after booting into my system, removing the stick, and running grub-install /dev/sda. It still happens, and I cannot boot without the USB drive inserted into the computer. And what really gets my goat is that the boot order of my system is CDROMHard DriveUSB. It's not even reaching the USB to try to boot from it, so why does it matter that it's not there? Edit: Also, I ran grub-config without the stick in followed by another grub-install. Still no go. FWIW, here's my grub.cfg file: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 set locale_dir=($root)/boot/grub/locale set lang=en_CA insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-25-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 linux /boot/vmlinuz-3.2.0-25-generic-pae root=UUID=20cec6ca-4024-4237-84c3-d2ba3c851497 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-25-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-25-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 echo 'Loading Linux 3.2.0-25-generic-pae ...' linux /boot/vmlinuz-3.2.0-25-generic-pae root=UUID=20cec6ca-4024-4237-84c3-d2ba3c851497 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-25-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=20cec6ca-4024-4237-84c3-d2ba3c851497 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 echo 'Loading Linux 3.2.0-23-generic-pae ...' linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=20cec6ca-4024-4237-84c3-d2ba3c851497 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic-pae } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 9014706714705268 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

Read the article

How do I enable sound with the "linux-virtual" kernel?

- by Ola Tuvesson

I've been trying to enable sound for the linux-virtual kernel as I want to run an ultra slim Ubuntu server under VirtualBox but need audio. The resource usage difference between virtual and generic/server is surprisingly large, with the virtual kernel system using 80Mb less RAM after a clean boot (130Mb vs 210Mb), and I really want to squeeze every clock cycle and available byte I can out of the system. Besides, the virtual kernel has some additional optimisations enabled specifically for virtual machines (or so I am told). Now I have compiled my own kernel a few times in the past, for example to include the Intel-PHC module (for improved power management on Thinkpads), so the concept is not entirely alien to me, but I've run into a strange problem which I'm hoping someone can help explain: When I do a diff between the config files for Linux-generic and Linux-virtual there are precious few differences, and certainly none which pertain to sound support; there are really only five or six lines which differ, and they're mainly to do with i/o timing, sleep state and priorities. What gives? I expected the differences to be extensive, and that I would be able to identify the options that enabled audio by looking at them, but my problem doesn't seem to be related to the config file at all (yes, I know about the sound drivers section - it is identical between the two kernel configs). Am I looking in the wrong place? Many thanks!

Read the article

External USB 3 drive not recognized

- by ilan123

Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

Read the article

Silverlight Relay Commands

- by George Evjen

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} I am fairly new at Silverlight development and I usually have an issue that needs research every day. Which I enjoy, since I like the idea of going into a day knowing that I am going to learn something new. The issue that I am currently working on centers around relay commands. I have a pretty good handle on Relay Commands and how we use them within our applications. <Button Command="{Binding ButtonCommand}" CommandParameter="NewRecruit" Content="New Recruit" /> Here in our xaml we have a button. The button has a Command and a CommandParameter. The command binds to the ButtonCommand that we have in our ViewModel RelayCommand _buttonCommand; /// <summary> /// Gets the button command. /// </summary> /// <value>The button command.</value> public RelayCommand ButtonCommand { get { if (_buttonCommand == null) { _buttonCommand = new RelayCommand( x => x != null && x.ToString().Length > 0 && CheckCommandAvailable(x.ToString()), x => ExecuteCommand(x.ToString())); } return _buttonCommand; } } In our relay command we then do some checks with a lambda expression. We check if the command parameter is null, is the length greater than 0 and we have a CheckCommandAvailable method that will tell us if the button is even enabled. After we check on these three items we then pass the command parameter to an action method. This is all pretty straight forward, the issue that we solved a few days ago centered around having a control that needed to use a Relay Command and this control was a nested control and was using a different DataContext. The example below illustrates how we handled this scenario. In our xaml usercontrol we had to set a name to this control. <Controls3:RadTileViewItem x:Class="RecruitStatusTileView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:Controls1="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls" xmlns:Controls2="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Input" xmlns:Controls3="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation" mc:Ignorable="d" d:DesignHeight="400" d:DesignWidth="800" Header="{Binding Title,Mode=TwoWay}" MinimizedHeight="100" x:Name="StatusView"> Here we are using a telerik RadTileViewItem. We set the name of this control to “StatusView”. In our button control we set our command parameters and commands different than the example above. <HyperlinkButton Content="{Binding BigBoardButtonText, Mode=TwoWay}" CommandParameter="{Binding 'Position.PositionName'}" Command="{Binding ElementName=StatusView, Path=DataContext.BigBoardCommand, Mode=TwoWay}" /> This hyperlink button lives in a ListBox control and this listbox has an ItemSource of PositionSelectors. The Command Parameter is binding to the Position.Position property of that PositionSelectors object. This again is pretty straight forward again. What gets a bit tricky is the Command property in the hyperlink. It is binding to the element name we created in the user control (StatusView) Because this hyperlink is in a listbox and is in the item template it doesn’t have a direct handle on the DataContext that the RadTileViewItem has so we have to make sure it does. We do that by binding to the element name of status view then set the path to DataContext.BigBoardCommand. BigBoardCommand is the name of the RelayCommand in the view model. private RelayCommand _bigBoardCommand = null; /// <summary> /// Gets the big board command. /// </summary> /// <value>The big board command.</value> public RelayCommand BigBoardCommand { get { if (_bigBoardCommand == null) { _bigBoardCommand = new RelayCommand(x => true, x => AddToBigBoard(x.ToString())); } return _bigBoardCommand; } } From there we check for true again and then call the action and pass in the parameter that we had as the command parameter. What we are working on now is a bit trickier than this second example. In the above example we are only creating this TileViewItem with this name “StatusView” once. In another part of our application we are generating multiple TileViewItems, so we cannot set the name in the control as we cant have multiple controls with the same name. When we run the application we get an error that reads that the value is out of expected range. My searching has led me to think we cannot have multiple controls with the same name. This is today’s problem and Ill post the solution to this once it is found.

Read the article

Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning Recommendation for HP Laptop OEM

- by Denja

Hi Linux Community, I find my self struggling with the ever slow and buggy windows OS once again. It's Time for me to go with the Ubuntu/Linux way for a better and faster Operating System. As a Computer technician i want to learn and use both Systems but possibly introduce New users to more affordable Linux Based Systems. For now, Im in the process of creating dual-boot or even triple boot layouts on my laptop machine Here's the layout in use now: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I want to make. * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows data partition (user files) NTFS - 60GB(Extended or Primary)(sda2);wanna share with Linux * Linux root Ext4 - 10GB (Primary)(sda3) * Linux swap swap- RAM size, 3GB (sda4) * Linux home Ext4- 164,9GB (Extended)(sda5) Question 1: Based on my layout what is your suggestion for a Triple Boot layout for an additional Linux OS (Like Puppy)? Thank you in advance for your advises and suggestions.

Read the article

Parallelize incremental processing in Tabular #ssas #tabular

- by Marco Russo (SQLBI)

I recently came in a problem trying to improve the parallelism of Tabular processing. As you know, multiple tables can be processed in parallel, whereas the processing of several partitions within the same table cannot be parallelized. When you perform an incremental update by adding only new rows to existing table, what you really do is adding rows to a partition, so adding rows to many tables means adding rows to several partitions. The particular condition you have in this case is that every partition in which you add rows belongs to a different table. Adding rows implies using the ProcessAdd command; its QueryBinding parameter specifies a SQL syntax to read new rows, otherwise the original query specified for the partition will be used, and it could generate duplicated data if you don’t have a dynamic behavior on the SQL side. If you create the required XMLA code manually, you will find that the QueryBinding node that should be part of the ProcessAdd command has to be moved out from ProcessAdd in case you are using a Batch command with more than one Process command (which is the reason why you want to use a single batch: run multiple process operations in parallel!). If you use AMO (Analysis Management Objects) you will find that this combination is not supported, even if you don’t have a syntax error compiling the code, but you might obtain this error at execution time: The syntax for the 'Process' command is incorrect. The 'Bindings' keyword cannot appear under a 'Process' command if the 'Process' command is a part of a 'Batch' command and there are more than one 'Process' commands in the 'Batch' or the 'Batch' command contains any out of line related information. In this case, the 'Bindings' keyword should be a part of the 'Batch' command only. If this is happening to you, the best solution I’ve found is manipulating the XMLA code generated by AMO moving the Binding nodes in the right place. A more detailed description of the issue and the code required to send a correct XMLA batch to Analysis Services is available in my article Parallelize ProcessAdd with AMO. By the way, the same technique (and code) can be used also if you have the same problem in a Multidimensional model.

Read the article

Logitech m510 mouse not working on 12.04 64bit

- by Alonso

When I run lsusb, this shows up: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver I have followed and done all of the stuff in: http://askubuntu.com/questions/154963/ubuntu-cannot-detect-my-logitech-wireless-m510-mouse Yet my mouse still fails to work. When trying to install HIDpoint, this appears after entering Y: libpng does not exist libtiff does not exist Gathering System information and generating a log Launching HIDPoint Installer ./hidpointsetup: error while loading shared libraries: libpng.so.3: cannot open shared object file: No such file or directory What can I do to fix this?

Read the article

Ubuntu 12.04 LTS 64 bit. Logitech m510 mouse not working!

- by Alonso

When I run lsusb, this shows up: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver I have followed and done all of the stuff in: Ubuntu cannot detect my Logitech Wireless m510 mouse? Yet my mouse still fails to work!!! When trying to install HIDpoint this appears after entering Y: libpng does not exist libtiff does not exist Gathering System information and generating a log Launching HIDPoint Installer ./hidpointsetup: error while loading shared libraries: libpng.so.3: cannot open shared object file: No such file or directory What can I do to fix this?

Read the article

Trendnet tew-424ub wireless not working after update 12.10

- by dwa

I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

Read the article

ubuntu 12.04 desktop Error: unknown command 'gfxmode'. Pressing any key continues

- by Andy

Premise: linux noobie here, I have the same issue as OP: fresh 12.04 desktop, changed grub with grub customizer, now I get a: unknown command 'gfxmode' press ...etc was asked to "re-post" this question and link to this thread which I refer to above. I have tried what Tarek said, and nothing seems to work, I find two lines with gfxmode: function gfxmode { gfxmode \$linux_gfx_mode Note: not sure if it matter but in the error the two single quotes before gfxmode are not the same, the first is a slanted quote mark, the second (after gfxmode) is a straight one. I commented out the whole line, I tried to add 'set' before gfxmode, neither did any difference. I found another place that said to remove the line from another file 40_custom, but I checked and those files do not contain anything relating to the line we are looking for: gfxmode $linux_gfx_mode Not sure what I am missing, but the file linux.save has recently appeared when searching for the line. Not sure if its just a temp file of some kind. In any case I cannot seem to get it, what am I missing? Thanks! P.S. sorry for any messups in form :)

Read the article

Error encountered compiling kernel 2.6.35-25.44

- by Matt

I downloaded the linux-source-2.6.35 package and tried to compile it using the command "fakeroot make-kpkg --append-to-version=.dbg kernel_image kernel_source kernel_headers --initrd" after "make menuconfig". The image .deb file is produced and installs fine, but an error stops the build process while trying to make the source package: scripts/Makefile.clean:17: /home/ade/linux-source-2.6.35/debian/linux-source-2.6.35.10.dbg/usr/src/linux-source-2.6.35.10.dbg/crypto/Makefile: No such file or directory make[1]: *** No rule to make target `/home/ade/linux-source-2.6.35/debian/linux-source-2.6.35.10.dbg/usr/src/linux-source-2.6.35.10.dbg/crypto/Makefile'. Stop. make: *** [_clean_crypto] Error 2 Sure enough, the folder linux-source-2.6.35/debian/linux-source-2.6.35.10.dbg/usr/src/linux-source-2.6.35.10.dbg/crypto does not exist (although all of the other kernel source folders appear to be there). I haven't even been able to determine where the folder is supposed to be copied over, or what's supposed to invoke clean. Am I doing something wrong here? It should be noted that I am running 10.04.

Read the article

How would I batch rename a lot of files using command-line?

- by Whisperity

I have a problem which I am unable to solve: I need to rename a great dump of files using patterns. I tried using this, but I always get an error. I have a folder, inside with a lot of files. Running ls -1 | wc -l, it returns that I have like 160000 files inside. The problem is, that I wish to move these files to a Windows system, but most of them have characters like : and ? in them, which makes the file unaccessible on said Windows-based systems. (As a "do not solve but deal with" method, I tried booting up a LiveCD on the Windows system and moving the files using the live OS. Under that Ubuntu, the files were readable and writable on the mounted NTFS partition, but when I booted back on Windows, it showed that the file is there but Windows was unable to access it in any fashion: rename, delete or open.) I tried running rename 's/\:/_' * inside the folder, but I got Argument list too long error. Some search revealed that it happens because I have so many files, and then I arrived here. The problem is that I don't know how to alter the command to suit my needs, as I always end up having various errors like Trying find -name '*:*' | xargs rename : _, it gives xargs: unmatched single quote; by default quotes are special to xargs unless you use the -0 option [\n] syntax error at (eval 1) line 1, near ":" [\n] xargs: rename: exited with status 255; aborting Adding the -0 after xargs turns the error message to xargs: argument line too long These files are archive files generated by various PHP scripts. The best solution would be having a chance to rename them before they are moved to Windows, but if there is no way to do it, we might have a way to rename the files while they are moved to Windows. I use samba and proftpd to move the files. Unfortunately, graphical software are out of the question as the server containing the files is what it is, a server, with only command-line interface.

Read the article

Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

- by jgottula

I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

Read the article

Which Ubuntu linux kernel tree matches my installed kernel?

- by Rmano

Answering a recent question, and before that, trying to see if a patch which is fundamental for my machine had been included in a kernel release, I have found the following problem: How can I match the kernel version I have for my kernel, which is [:~] % uname -a Linux samsung-romano 3.13.0-29-generic #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux with the exact kernel source, which I suppose should be stored in http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=summary? In that page there are quite a lot of tags, for example: But none of them correspond to 3.13.0-29 which is my running kernel right now. The mapping should be in https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable, where it is said that the 3.13 Ubuntu kernel is based on 3.13.11 --- I think. But from there to finding the tree I have installed is not straightforward. Notice: I know I can install the kernel source corresponding with my installed kernel. But I do not want to install them; I would like ti have a pointer to the git tree to be able to browse it online (and check for commits, patches, etc.). The best options seems to go to linux3.13-y.review or linux3.13-y.queue, but I am unable to find where this tree are marked for the release - if I understand well the policy, in -review the patches are accumulated for testing, and in -queue accumulated for the next minor release/update --- but I am unable to find the exact release tree. I mean, a tag equivalent to 3.13.0-29 was cut here.

Read the article

Is there a command to "manually automount" an attached disk?

- by cheshirekow

I have an extra hard drive which I use for backups. The label on its one and only partition is "backup". When I open nautilus and click on "backup" it mounds the drive in "/media/backup", and then there's a little eject button next to it's icon in nautilus. If I manually mount the drive by creating a directory and using "sudo mount /dev/sdx /some/dir", the eject icon still shows up in nautilus, but when I press it I get an error because the device was not mounted via whatever it is that mounts it the other way. What I would like is to be able to do this "mount to /media/backup and enable the eject button" via the command line. The goal is to have the device mounted by a script which needs the drive, but then leave it mounted until I manually eject it... if I want to. P.S. I'm aware that I can have the drive auto mounted at startup, but that's not what I'm looking for here, and I'd like to know if this is possible. Clarification: I'm looking for a command to "mount the drive the way nautilus would". This should create the directory "/media/backup", mount the device to that directory, and then when I press the eject button from nautilus, it should unmount the device and delete the directory.

Read the article

CMake can not find PythonLibs

- by tintin

I am trying to build inria Graphite on my ubuntu which is running in a VirtualBox simulator, I follow the instructions, and install the python-dev packages, but when I run cmake , still got an error: CMake Error at /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:108 (message): Could NOT find PythonLibs (missing: PYTHON_LIBRARIES PYTHON_INCLUDE_DIRS) (Required is at least version "3.2") Call Stack (most recent call first): /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:315 (_FPHSA_FAILURE_MESSAGE) /usr/share/cmake-2.8/Modules/FindPythonLibs.cmake:208 (FIND_PACKAGE_HANDLE_STANDARD_ARGS) src/packages/OGF/gel_python3/CMakeLists.txt:11 (FIND_PACKAGE) I checked the /usr/lib/ and find tintin@tintin-VirtualBox:/usr/lib$ find . -name "libpython*" ./x86_64-linux-gnu/libpython3.4m.so.1.0 ./x86_64-linux-gnu/libpython2.7.so.1.0 ./x86_64-linux-gnu/libpython3.4m.a ./x86_64-linux-gnu/libpython2.7.a ./x86_64-linux-gnu/libpython3.4m.so ./x86_64-linux-gnu/libpython2.7.so ./x86_64-linux-gnu/libpython2.7.so.1 ./x86_64-linux-gnu/libpython3.4m.so.1 so why cmake can not find the PythonLibs, or how should I deal with this?

Read the article

Tester/Doer pattern: Assume the caller conforms to the pattern or be defensive and repeat the check?

- by Daniel Hilgarth

Assume a simple class that implements the Tester/Doer pattern: public class FooCommandHandler : ICommandHandler { public bool CanHandle(object command) { return command is FooCommand; } public void Handle(object command) { var fooCommand = (FooCommand)command; // Do something with fooCommand } } Now, if someone doesn't conform to the pattern and calls Handle without verifying the command via CanHandle, the code in Handle throws an exception. However, depending on the actual implementation of Handle this can be a whole range of different exceptions. The following implementation would check CanHandle again in Handle and throw a descriptive exception: public void Handle(object command) { if(!CanHandle(command)) throw new TesterDoerPatternUsageViolationException("Please call CanHandle first"); // actual implementation of handling the command. } This has the advantage that the exception is very descriptive. It has the disadvantage that CanHandle is called twice for "good" clients. Is there a consensus on which variation should be used?

Search Results

Search found 41561 results on 1663 pages for 'linux command'.

Page 653/1663 | < Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660 | Next Page >

- by Mark

- by DaveCol

- by Robz / Fervent Coder

- by HTMZ

- by sam

- by kaare

- by Zxy

- by alejandro.vargas

- by agent154

- by Ola Tuvesson

- by ilan123

- by George Evjen

- by Denja

- by Marco Russo (SQLBI)

- by Alonso

- by Alonso

- by dwa

- by Andy

- by Matt

- by Whisperity

- by jgottula

- by Rmano

- by cheshirekow

- by tintin

- by Daniel Hilgarth

< Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660 | Next Page >