Search Results

Search found 28582 results on 1144 pages for 'message loop'.

Page 653/1144 | < Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660  | Next Page >

  • Restrict SSL access for some paths on a apache2 server

    - by valmar
    I wanted to allow access to www.mydomain.com/login through ssl only. E.g.: Whenever someone accessed http://www.mydomain.com/login, I wanted him to be redirect to https://www.mydomain.com/login so it's impossible for him/her to access that site without SSL. I accomplished this by adding the following lines to the virtual host for www.mydomain.com on port 80 in /etc/apache2/sites-available/default: RewriteEngine on RewriteCond %{SERVER_PORT} ^80$ RewriteRule ^/login(.*)$ https://%{SERVER_NAME}/login$1 [L,R] RewriteLog "/var/log/apache2/rewrite.log" Now, I want to restrict using SSL for www.mydomain.com. That means, whenever someone accessed https://www.mydomain.com, I want him to be redirected to http://www.mydomain.com (for performance reasons). I tried this by adding the following lines to the virtual host of www.mydomain.com on port 443 in /etc/apache2/sites-available/default-ssl: RewriteEngine on RewriteCond %{SERVER_PORT} ^443$ RewriteRule ^/(.*)$ http://%{SERVER_NAME}/$1 [L,R] RewriteLog "/var/log/apache2/rewrite.log" But when I now try to access www.mydomain.com/login, I get an error message that the server has caused to many redirects. That does make sense. Obviously, the two RewriteRules are playing ping-pong against each other. How could I work around this?

    Read the article

  • How to configure Exchange Server with AutoReply that sends the reply only once?

    - by Abel
    If you configure Exchange Server 2007 for auto-reply on a public address, and the reply is sent to an address that also has auto-reply or out-of-office-auto-reply, then Exchange Server will receive a new message, same from-address, and will again send an auto-reply. This can go on forever and can potentially lead to a DoS situation. How can I prevent multiple sending of auto-reply to the same address, preferably in a given timeframe (to prevent legitimate multiple mails to be treated incorrectly), using Exchange Server 2007? Our XS hosting provider says it cannot be done, but that strikes me as odd.

    Read the article

  • Issues with partitions WIN 7

    - by pomber
    I was trying to make some space to install linux in my HP notebook. The computer had 4 partitions, I made space shrinking one and created a new one (facepalm) using the windows partitioning tool. It show me some warning message saying something about dynamic partitions, I ingored it, and went to the linux live CD. I installed linux in the new partition, after the installation completed it told me that GRUB cannot be installed I dont remember why. So now, it doesnt boot, neither windows nor linux. After google for a while I found the diskpart command, it gives me this info: DISKPART> list disk DISK ### Status -------- --------------- DISK 0 Invalid DISKPART> select disk 0 DISKPART> select partition Partition ### TYPE ------------- -------------- Partition 1 Dynamic Data Partition 2 Dynamic Data Partition 3 Dynamic Data Partition 4 Primary <- I think I put linux here Any idea whats happening? Or how to solve it? Thanks

    Read the article

  • Iomega Home Media Network Hard Drive: Accesing the data in the disk?

    - by JJarava
    Hi all! I have an Iomega Home Media Network Hard Drive, 1TB, and lately I can't access the data on the drive. The shares (both built-in and created by me) are there, the security works, but when trying to access the data I get a "The network path was not found" message which is worrying, to say the least. I'd like to know if there is a way to get the data off the disks somehow, as some of the data in the drive (ie, pictures and videos of my 1.5 yrs old son) is hard if not impossible to find otherwise. Thanks a lot Javier

    Read the article

  • Why are some checkboxes in Software Updater disabled?

    - by Drew Noakes
    In Ubuntu 13.04, the Software Updater shows some apps as having updates, but they're non-selectable: It's not clear why they're greyed out. On the command line: $ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: gnuplot-nox gnuplot-x11 nvidia-current 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. Note too that running apt-get dist-upgrade does not cause them to be installed either, as it sometimes does with packages that are kept back. Here's the output: $ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: gnuplot-nox gnuplot-x11 nvidia-current 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. I took @quidage's suggestion, which gives the following. However subsequent upgrades show the same message: $ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.

    Read the article

  • Why might login failures cause SQL 2005 to dump and ditch?

    - by Byron Sommardahl
    Our SQL 2005 server began timing out and finally stopped responding on Oct 26th. The application logs showed a ton of 17883 events leading up to a reboot. After the reboot everything was fine but we were still scratching our heads. Fast forward 6 days... it happened again. Then again 2 days later. The last night. Today it has happened three times to far. The timeline is fairly predictable when it happens: Trans log backups. Login failure for "user2". Minidump Another minidump for the scheduler Repeated 17883 events. Server fails little by little until it won't accept any requests. Reboot is all that gets us going again (a band-aid) Interesting, though, is that the server box itself doesn't seem to have any problems. CPU usage is normal. Network connectivity is fine. We can remote in and look at logs. Management studio does eventually bog down, though. Today, for the first time, we tried stopping services instead of a reboot. All services stopped on their own except for the SQL Server service. We finally did an "end task" on that one and were able to bring everything back up. It worked fine for about 30 minutes until we started seeing timeouts and 17883's again. This time, probably because we didn't reboot all the way, we saw a bunch of 844 events mixed in with the 17883's. Our entire tech team here is scratching heads... some ideas we're kicking around: MS Cumulative Update hit around the same time as when we first had a problem. Since then, we've rolled it back. Maybe it didn't rollback all the way. The situation looks and feels like an unhandled "stack overflow" (no relation) in that it starts small and compounds over time. Problem with this is that there isn't significant CPU usage. At any rate, we're not ruling SQL 2005 bug out at all. Maybe we added one too many import processes and have reached our limit on this box. (hard to believe). Looking at SQLDUMP0151.log at the time of one of the crashes. There are some "login failures" and then there are two stack dumps. 1st a normal stack dump, 2nd for a scheduler dump. Here's a snippet: (sorry for the lack of line breaks) 2009-11-10 11:59:14.95 spid63 Using 'xpsqlbot.dll' version '2005.90.3042' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required. 2009-11-10 11:59:15.09 spid63 Using 'xplog70.dll' version '2005.90.3042' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required. 2009-11-10 12:02:33.24 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:02:33.24 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:08:21.12 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:08:21.12 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:13:49.38 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:13:49.38 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:15:16.88 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:15:16.88 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:18:24.41 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:18:24.41 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:18:38.88 spid111 Using 'dbghelp.dll' version '4.0.5' 2009-11-10 12:18:39.02 spid111 *Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\SQLDump0149.txt 2009-11-10 12:18:39.02 spid111 SqlDumpExceptionHandler: Process 111 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. 2009-11-10 12:18:39.02 spid111 * ***************************************************************************** 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * BEGIN STACK DUMP: 2009-11-10 12:18:39.02 spid111 * 11/10/09 12:18:39 spid 111 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * Exception Address = 0159D56F Module(sqlservr+0059D56F) 2009-11-10 12:18:39.02 spid111 * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION 2009-11-10 12:18:39.02 spid111 * Access Violation occurred writing address 00000000 2009-11-10 12:18:39.02 spid111 * Input Buffer 138 bytes - 2009-11-10 12:18:39.02 spid111 * " N R S C _ P T A 22 00 4e 00 52 00 53 00 43 00 5f 00 50 00 54 00 41 00 2009-11-10 12:18:39.02 spid111 * C _ Q A . d b o . 43 00 5f 00 51 00 41 00 2e 00 64 00 62 00 6f 00 2e 00 2009-11-10 12:18:39.02 spid111 * U s p S e l N e x 55 00 73 00 70 00 53 00 65 00 6c 00 4e 00 65 00 78 00 2009-11-10 12:18:39.02 spid111 * t A c c o u n t 74 00 41 00 63 00 63 00 6f 00 75 00 6e 00 74 00 00 00 2009-11-10 12:18:39.02 spid111 * @ i n t F o r m I 0a 40 00 69 00 6e 00 74 00 46 00 6f 00 72 00 6d 00 49 2009-11-10 12:18:39.02 spid111 * D & 8 @ t x 00 44 00 00 26 04 04 38 00 00 00 09 40 00 74 00 78 00 2009-11-10 12:18:39.02 spid111 * t A l i a s § 74 00 41 00 6c 00 69 00 61 00 73 00 00 a7 0f 00 09 04 2009-11-10 12:18:39.02 spid111 * Ð GQE9732 d0 00 00 07 00 47 51 45 39 37 33 32 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * MODULE BASE END SIZE 2009-11-10 12:18:39.02 spid111 * sqlservr 01000000 02C09FFF 01c0a000 2009-11-10 12:18:39.02 spid111 * ntdll 7C800000 7C8C1FFF 000c2000 2009-11-10 12:18:39.02 spid111 * kernel32 77E40000 77F41FFF 00102000

    Read the article

  • Can't connect to wireless router anymore due to data rate problem

    - by Jay White
    I was playing around with my wireless router, and switched the mode to a fixed mode B. Now< I can no longer assoicate to the AP. Windows does not give any particular error message, but with wireshark I see that the returned error is that the client does not support the necessary data rate. My wireless card is type n, and it is set to mode a/b/g compatible. I tried setting ot to just b, however this made no difference. How can I set the data rate of my card so that I can connect again to my AP? I would prefer not to just reset the device, as there has been some configuration done that would be a pain to redo, and as well I do not have the ISP password handy. Regardless I would like to understand this situation better.

    Read the article

  • Mac OS X: network disabled because security breach

    - by fireeyedboy
    Dear all, I just recieved a message on my Mac OS X system telling me (loosely translated from Dutch): "The network has been temporarily disabled because the network's security was breached." (It's a wireless WPA2-PSK secured network BTW) I looked in the logs of my router (a Zyxel P-2602HW-D1A) only to see a few (outbound) "syn flood TCP ATTACK" logs, but those were from like a week ago, other than that nothing. What tools on Mac OS X do I have to analyse this security breach occurence? Are there some security logs on Mac OS X that I can inspect? What other measurements should I take? And how serious should I take this warning from Mac OS X? System: Macbook Pro Intel Core 2 Duo 2.2 Ghz OS: Mac OS X 10.5.8 Network: wireless WPA2-PSK Relevant software: Parallels Desktop with Windows XP (was open, but stopped at the time) Other systems on my network: Windows XP SP3 desktop (was running at the time) If you need any more info, don't hestitate to ask. Thanks in advance.

    Read the article

  • Project Euler 18: (Iron)Python

    - by Ben Griswold
    In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 18.  As always, any feedback is welcome. # Euler 18 # http://projecteuler.net/index.php?section=problems&id=18 # By starting at the top of the triangle below and moving # to adjacent numbers on the row below, the maximum total # from top to bottom is 23. # # 3 # 7 4 # 2 4 6 # 8 5 9 3 # # That is, 3 + 7 + 4 + 9 = 23. # Find the maximum total from top to bottom of the triangle below: # 75 # 95 64 # 17 47 82 # 18 35 87 10 # 20 04 82 47 65 # 19 01 23 75 03 34 # 88 02 77 73 07 63 67 # 99 65 04 28 06 16 70 92 # 41 41 26 56 83 40 80 70 33 # 41 48 72 33 47 32 37 16 94 29 # 53 71 44 65 25 43 91 52 97 51 14 # 70 11 33 28 77 73 17 78 39 68 17 57 # 91 71 52 38 17 14 91 43 58 50 27 29 48 # 63 66 04 68 89 53 67 30 73 16 69 87 40 31 # 04 62 98 27 23 09 70 98 73 93 38 53 60 04 23 # NOTE: As there are only 16384 routes, it is possible to solve # this problem by trying every route. However, Problem 67, is the # same challenge with a triangle containing one-hundred rows; it # cannot be solved by brute force, and requires a clever method! ;o) import time start = time.time() triangle = [ [75], [95, 64], [17, 47, 82], [18, 35, 87, 10], [20, 04, 82, 47, 65], [19, 01, 23, 75, 03, 34], [88, 02, 77, 73, 07, 63, 67], [99, 65, 04, 28, 06, 16, 70, 92], [41, 41, 26, 56, 83, 40, 80, 70, 33], [41, 48, 72, 33, 47, 32, 37, 16, 94, 29], [53, 71, 44, 65, 25, 43, 91, 52, 97, 51, 14], [70, 11, 33, 28, 77, 73, 17, 78, 39, 68, 17, 57], [91, 71, 52, 38, 17, 14, 91, 43, 58, 50, 27, 29, 48], [63, 66, 04, 68, 89, 53, 67, 30, 73, 16, 69, 87, 40, 31], [04, 62, 98, 27, 23, 9, 70, 98, 73, 93, 38, 53, 60, 04, 23]] # Loop through each row of the triangle starting at the base. for a in range(len(triangle) - 1, -1, -1): for b in range(0, a): # Get the maximum value for adjacent cells in current row. # Update the cell which would be one step prior in the path # with the new total. For example, compare the first two # elements in row 15. Add the max of 04 and 62 to the first # position of row 14.This provides the max total from row 14 # to 15 starting at the first position. Continue to work up # the triangle until the maximum total emerges at the # triangle's apex. triangle [a-1][b] += max(triangle [a][b], triangle [a][b+1]) print triangle [0][0] print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

    Read the article

  • Setting up Eclipse for C development using CDT plugin

    - by Homunculus Reticulli
    I am using Eclipse 3.5.2. I want to install the CDT plugin so that I can compile C/C++ programs. I attempted to install the CDT plugin and it failed, given the following error message: Cannot complete the install because one or more required items could not be found. Software being installed: C/C++ GCC Cross Compiler Support 1.1.0.201206111645 (org.eclipse.cdt.build.crossgcc.feature.group 1.1.0.201206111645) Missing requirement: C/C++ Managed Builder UI 8.1.0.201206111645 (org.eclipse.cdt.managedbuilder.ui 8.1.0.201206111645) requires 'bundle org.eclipse.ui.console [3.5.100,4.0.0)' but it could not be found Cannot satisfy dependency: From: CDT GCC Cross Compiler Support 1.1.0.201206111645 (org.eclipse.cdt.build.crossgcc 1.1.0.201206111645) To: bundle org.eclipse.cdt.managedbuilder.ui 8.1.0 Cannot satisfy dependency: From: C/C++ GCC Cross Compiler Support 1.1.0.201206111645 (org.eclipse.cdt.build.crossgcc.feature.group 1.1.0.201206111645) To: org.eclipse.cdt.build.crossgcc [1.1.0.201206111645] Has anyone managed to install/use the CDT plugin with Eclipse v 3.5.2 ?

    Read the article

  • Regarding Reinstalling PostgreSQL

    - by Vivalavista
    I was using PostgreSQL 8.4. I tried removing it through Synaptic Manager and then I tried to install 9.1, but I still version 8.4. I deleted all the files associated with postgresql. Now I am unable to install any version of PostgreSQL. When I try I get this error: Setting up postgresql-9.1 (9.1.3-1~lucid) ... .: 12: Can't open /usr/share/postgresql-common/maintscripts-functions dpkg: error processing postgresql-9.1 (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of postgresql: postgresql depends on postgresql-9.1; however: Package postgresql-9.1 is not configured yet. dpkg: error processing postgresql (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: postgresql-9.1 postgresql E: Sub-process /usr/bin/dpkg returned an error code (1) Please tell me the way to remove postgres completely so I can install a fresh version.

    Read the article

  • Why is it that XCode cannot push my changes?

    - by Justin Case
    I am writing an iOS application in XCode. I associated a remote repository to it. I finished writing a View Controller file and then went to File - Source Control - Commit. I wrote a commit message. Oddly, every time I typed a space, an error popped up that read "1 of 2 files will be commited." I then tried to push the commit by clicking File - Source Control - Push. However, I get an error that notes that I have unsaved changes. Why? Didn't I just commit?

    Read the article

  • Can Ubuntu-One be installed on Ubuntu 10.04?

    - by crivello
    I have installed ubuntu-one by the several ways on a 10.04-TLS, it appears on my System Preference Ubuntu One. however, Clicking one it , nothing happens. On a terminal, the command : ~$ ubuntuone-launch doe not working too, and the following command ~$ ubuntuone-preferences leads to an error message, given below, that made me crazy. Does somebody has an idea one a solution to solve that ? Many thanks. \jcc Traceback (most recent call last): File "/usr/bin/ubuntuone-preferences", line 63, in <module> from desktopcouch.replication_services import ubuntuone as dcouch File "/usr/lib/python2.6/dist-packages/desktopcouch/__init__.py", line 20, in <module> from desktopcouch.start_local_couchdb import process_is_couchdb, read_pidfile File "/usr/lib/python2.6/dist-packages/desktopcouch/start_local_couchdb.py", line 38, in <module> from desktopcouch import local_files File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 300, in <module> xdg_base_dirs.save_config_path("desktop-couch")) File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 235, in __init__ self.couch_exec_command = [COUCH_EXE, self.couch_chain_ini_files(), File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 274, in couch_chain_ini_files stdout=subprocess.PIPE) File "/usr/lib/python2.6/subprocess.py", line 633, in __init__errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1139, in _execute_child raise child_exception OSError: [Errno 13] Permission denied

    Read the article

  • Can't login into Fedora 14 (XFCE) desktop. For the second time.

    - by bubba88
    Hello. I'm experiencing a problem with my Fedora 14 XFCE spin, which doesn't seem to let me pass the login screen: I enter my password for my user record, authentication passes (no 'Authentication Failure' message, which was when I tried to login as 'root' without root login enabled), and the screen becomes black (command line) for a couple of seconds and (voila!) my login screen emerges again. I did nothing to cause that, it just suddenly logged me out when I was editing window manager settings via XFCE's built-in GUI utility (choosing window decorations style, from the listbox on the left) For the first time, I had to boot from live CD and do a fresh install, but I don't really want to do that again :) Is there some way to repair this (maybe login via command line and reset window manager settings, I don't know really)? Thank you very much in advance!

    Read the article

  • Unity install removed window borders, and display drivers.

    - by Vivek Sharma
    I installed unity, used for a while. Then i installed gnome-shell, used it for a while. Now decided to switch back to standard. Gnome is not working the way it use to be. I am using T61 with nvidia-latest drivers. Following issues... Window borders are not showing. Installed compiz settings, and re-check window decorations option. I had to re-install nvidia driver, as when I tried to apply normal visual effects, it said no display driver found. Gnome panel is not coming, and mouse pointer is a "cross" than a "arrow". I then opened a terminal and enter gnome-panel. Panel came and window borders came back. Nothing is showing on desktop, and the right click is also not populating the menu. When i loging, an error message saying, docky did not start and it requires compiz to work. After starting gnome-panel from terminal, i went to systempreferencesAppearance. And selected normal visual effects. It activated, i selected keep the settings. Now when i restart or re-login, everything is gone. I have to run gnome-panel manually, and then re-enable visual setting. Ofcourse i can add gnome-panel in startup applications, but i want to know what has installing unity/gnome-shell has done, that these setting are messed up. I manually removed mutter, as Appearance application was showing mutter installed, cant enable effects. What shall i do to get back a standard gnome-desktop back.

    Read the article

  • Python script won't write data when ran from cron

    - by Ruud
    When I run a python script in a terminal it runs as expected; downloads file and saves it in the desired spot. sudo python script.py I've added the python script to the root crontab, but then it runs as it is supposed to except it does not write the file. $ sudo crontab -l > * * * * * python /home/test/script.py >> /var/log/test.log 2>&1 Below is a simplified script that still has the problem: #!/usr/bin/python scheduleUrl = 'http://test.com/schedule.xml' schedule = '/var/test/schedule.xml' # Download url and save as filename def wget(url, filename): import urllib2 try: response = urllib2.urlopen(url) except Exception: import traceback logging.exception('generic exception: ' + traceback.format_exc()) else: print('writing:'+filename+';') output = open(filename,'wb') output.write(response.read()) output.close() # Download the schedule wget(scheduleUrl, schedule) I do get the message "writing:name of file;" inside the log, to which the cron entry outputs. But the actual file is nowhere to be found... The dir /var/test is chmodded to 777 and using whatever user, I am allowed to add and change files as I please.

    Read the article

  • Mysql not loading correctly

    - by mcondiff
    PHP 5.3.2 Apache 2.2.15 Mysql 5.1.X Windows XP SP3 I have now configured everything correctly but get a timeout when trying to connect to Mysql via PHP. So frustrated. I don't get an error message, the script just times out. I have made sure I have the correct paths. Fatal error: Maximum execution time of 60 seconds exceeded Any idea why this might be happening? I do a php -v from the command line and everything is normal, no errors. i upgraded PHP from 5.2.6 to 5.3.2 - does there seem to be problems or bugs with this? I am essentially using my previous PHP.ini while editing paths. I am lost. Help! If you need anything from phpinfo() or httpd.conf or php.ini let me know. else

    Read the article

  • Oracle HTTP Server access_log - GET /error/404.html HTTP/1.0 200 7001 entries

    - by Pavan
    access_log shows the following entries repeatedly, seems like it is polling some thing. There were so many entries keep on adding to the log, making it difficult to debug for actual error message. aaa.bbb.ccc.ddd - - [07/Nov/2012:00:02:48 -0800] "HEAD /index.html HTTP/1.1" 200 - abc.bcd.cda.dab - - [07/Nov/2012:00:02:50 -0800] "GET /error/404.html HTTP/1.0" 200 7001 abc.bcd.cda.dac - - [07/Nov/2012:00:02:51 -0800] "GET /error/404.html HTTP/1.0" 200 7001 abc.bcd.cda.dab - - [07/Nov/2012:00:02:56 -0800] "GET /error/404.html HTTP/1.0" 200 7001 abc.bcd.cda.dac - - [07/Nov/2012:00:02:56 -0800] "GET /error/404.html HTTP/1.0" 200 7001 abc.bcd.cda.dab - - [07/Nov/2012:00:03:01 -0800] "GET /error/404.html HTTP/1.0" 200 7001 abc.bcd.cda.dac - - [07/Nov/2012:00:03:01 -0800] "GET /error/404.html HTTP/1.0" 200 7001 abc.bcd.cda.dab - - [07/Nov/2012:00:03:06 -0800] "GET /error/404.html HTTP/1.0" 200 7001 abc.bcd.cda.dac - - [07/Nov/2012:00:03:06 -0800] "GET /error/404.html HTTP/1.0" 200 7001 aaa.bbb.ccc.ddd - - [07/Nov/2012:00:03:08 -0800] "HEAD /index.html HTTP/1.1" 200 - how to avoid these repeating entries?

    Read the article

  • Installation of Microsoft SQL Server 2008 R2 Developer Edition fails

    - by Yustme
    I'm having a problem installing MS SQL Server 2008 Developer edition on a Vista Ultimate 64 Bit machine. No matter what I try: I uninstalled the previous installation; I deleted all folders that where installed and had to do with SQL Server 2008; I cleared my registry using ccleaner; I tried 'fixit' utility from Microsoft uninstalling left overs; It just keeps failing at installing setup support files with this error message: SQL Server Setup failure SQL Server Setup has encountered the following error: Unknown property. [OK] I'm totally out of ideas. Any one has a suggestion for me to look at?

    Read the article

  • How to solve Microsoft Office error 1402 on Windows 7?

    - by yihang
    I have installed Microsoft Office on my new Windows 7 64-bit system. Recently, it encounter some error and I tried to re-install it. It wasn't successful. So, I have to use Microsoft Install Clean Up to uninstall Microsoft Office. When I tried to install it again, I received this message: Microsoft Office 2007 encountered an error during setup. Error 1402. Setup cannot open the registry key. {a bunch of long keys}. Verify that you have sufficient permissions to access the registry or contact Microsoft Product Support Service for assistance. For information about how to contact PSS, see {a *chm file}. After that, I tried to run the setup as administrator but I ended up with the same error. So what should I do to solve this problem?

    Read the article

  • "Unsupported compression method 98" error when unzipping a file. What tools support it, other than W

    - by Chris W. Rea
    I'm getting an error message: "unsupported compression method 98" when unzipping a file somebody sent to me. I've tried both an older version of WinZip, and 7-Zip 4.65. I've already asked the person to avoid using a non-standard compression method and re-send the file. I know WinZip (of which they are using a newer version) has compatibility options. But, I'm wondering: What archiving utilities, other than WinZip, support this "compression method 98"? In particular, is there a free and/or open source tool that supports that method? If not, why not? Is the method strictly proprietary to WinZip?

    Read the article

  • Boot from VHD with windows7 - bcdedit trouble

    - by Michiel Overeem
    I'm running Windows7 Enterprise, x64 version. I've created a windows7 vhd file with help of the following blog post hanselman blog After that, I've added it to my boot menu with help of another blog post hanselman blog This worked great. After that, i've upgraded my hdd. With help of clonezilla i've copied the old disk to the new disk. Next step was to copy the vhd to another partition. Then i updated the boot menu. However, the step C:\>bcdedit /set {guid} device vhd=[driveletter:]\<directory>\<vhd filename> fails with the message An error has occurred setting the element data. The request is not supported. what is happening?

    Read the article

  • Unable to sync the Zune software with my HTC HD7

    - by Varpi
    I have a brand new HTC HD7 with Windows Phone 7, with no Software installed. I am running on Windows 7 64 bit. Whenever I try to sync my Mobile Device with Zune- I get this message: Can't connect to your phone. Disconnect it, restart it, then try connecting again I've downloaded latest Zune software and all updates. I don't have any certificates on my personal certificates. My phone is listed under Portable devices in Device manager (It shows as phone with driver version 4.7.965.0). I've restarted both my computer and the mobile device few times. I tried unlocking the device during the Zune sync Any ideas as to how I can sync my phone ?

    Read the article

  • OS X Server App ail not accept login credentials

    - by user164113
    I cannot login to the server app and i know for sure all the login info is right. every time i enter my password the name window shakes to tell me it's invalid. I never post unless I'm out of ideas and I need it to be up so I can host my splash page tonight. i've spoken with "certified apple" specialists at some local mac stores and they are stumped too. Something is going on with the apache server, that's all i know for sure. I'll be monitoring this closely so any requests for info, etc. can be filled instantly. Thanks in advance. here's a few things i've noticed: I can ssh successfully into the server address as both root and admin. I've been fussing with the workgroup manager and could use guidance if that's where the problem lies. console shows this message repeatedly (org.apache.httpd[1890]) Exited with code: 1). Much appreciated, harry

    Read the article

  • MacBook's Airport not working from menu bar

    - by not22
    All of the sudden my MacBook doesn't connect to my wireless after waking from sleep. My network shows up at full signal strength and it remembers the password correctly, but I get an error message when I try to connect from the menu bar. The only way I can get on the internet is to go through Network Diagnostics and turn it on there. I don't understand why it works every time through Network Diagnostics and never on it's own or through the airport menu bar. Nothing has been changed or installed or reset on my computer that I know of. Restarting doesn't fix it, nor does turning off the airport card. Any ideas?

    Read the article

< Previous Page | 649 650 651 652 653 654 655 656 657 658 659 660  | Next Page >