Search Results

Search found 64472 results on 2579 pages for 'data context'.

Page 657/2579 | < Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >

  • SQL Server 2005 Disk Configuration: Single RAID 1+0 or multiple RAID 1+0s?

    - by mfredrickson
    Assuming that the workload for the SQL Server is just a normal OLTP database, and that there are a total of 20 disks available, which configuration would make more sense? A single RAID 1+0, containing all 20 disks. This physical volume would contain both the data files and the transaction log files, but two logical drives would be created from this RAID: one for the data files and one for the log files. Or... Two RAID 1+0s, each containing 10 disks. One physical volume would contain the data files, and the other would contain the log files. The reason for this question is due to a disagreement between me (SQL Developer) and a co-worker (DBA). For every configuration that I've done, or seen others do, the data files and transaction log files were separated at the physical level, and were placed on separate RAIDs. However, my co-workers argument is that by placing all the disks into a single RAID 1+0, then any IO that is done by the server is potentially shared between all 20 disks, instead of just 10 disks in my suggested configuration. Conceptually, his argument makes sense to me. Also, I've found some information from Microsoft that seems to supports his position. http://technet.microsoft.com/en-us/library/cc966414.aspx In the section titled "3. RAID10 Configuration", showing a configuration in which all 20 disks are allocated to a single RAID 1+0, it states: In this scenario, the I/O parallelism can be used to its fullest by all partitions. Therefore, distribution of I/O workload is among 20 physical spindles instead of four at the partition level. But... every other configuration I've seen suggests physically separating the data and log files onto separate RAIDs. Everything I've found here on Server Fault suggests the same. I understand that a log files will be write heavy, and that data files will be a combination of reads and writes, but does this require that the files be placed onto separate RAIDs instead of a single RAID?

    Read the article

  • How to backup Servers to an SSH-Host with low traffic and access to versions and encryption?

    - by leto
    Hello, I've not run backups for the past dont't remember anymore years for my personal stuff until waking up lately and realising contrary to my prior belief: Actually. I care! :) Now I have a central data server at home where I want to attach an external media to, to which I want to save backups of my most important stuff, like years of self-written scripts, database dumps, you name it. I've tinkered with rsync+ssh over the last two years, also tried tar over ssh, but don't know the simplest and most easy to maintain way to do it yet. Heres my workload: A typical LAMP-Server (<5GB Data) which I'd like to backup fully so lots of small files connected via 10Mbit My personal stuff (<750GB Data) from a Mac connected via GE My passwords in an encrypted container (100Mb) from OpenBSD connected via serial-PPP My E-Mail from the last ten years (<25GB) as Maildir which I need to keep in readable format Some archives (tar.*) which I need to backup only once and keep in readable format (Deleted my ideas, as I'm here for suggestions) What I need: 1. Use an ssh-tunnel for data transfer 2. Be quick with lots of small files 3. Keep revisions 4. Be sure the data I save is not corrupted 5. Intelligent resume functions and be able to deal with network congestion :) 6. Compressed and optionally encrypted storage 7. Be able to extract data from backup easily (filesystem like usage would be nice) How would and with what software would you backup this stuff? Hints to tools that can help solve only part of my problem (like encryption) also greatly appreciated. Greets

    Read the article

  • What happened to 'Copy Public Gallery Link' for folders in Photos in Dropbox?

    - by Transgenic
    I've been trying to figure out how to use the 'Photos' folder properly, but it does not seem to contain the functionality that is mentioned on various websites. From what I've read, you are supposed to create a folder within the 'Photos' folder. At that point, it becomes a public gallery for which you can access the context menu item Copy Public Gallery Link. However, I do not have this context menu item. I found a topic on the DropBox forum, but it is 2 years old. Even the various website information mentioned is over a year old. I found a topic from this year on SuperUser that mentions about the Share link menu item. I understand that this functionality is basically the same as Copy Public Gallery Link, however, the key difference is that it opens the website for which I need to click 'Copy link to this page' link, which then adds it to the clipboard. My primary questions are: Did they phase out the Copy Public Gallery Link from the context menu entirely? If not, is there a way to re-enable this menu item? If not, am I using the Photos folder properly? Lastly, if there is no way to get this menu item, is there some kind of script or hack-around that will let me simplify the Shark link + Copy link to this page functionality without requiring it to open my web browser? Note: I had to edit my post to remove other website links that I mention since I'm considered a 'New User' here and am only able to post 2 hyperlinks. Sorry.

    Read the article

  • How to provide users with isolated drive letters in Windows 2008 R2 (Terminal Server) [migrated]

    - by Pierre
    I need to be able to host several RDP sessions on a Terminal Server, where users of group A see a drive X: mapped to a given folder of the server and another group B see the same drive letter X: mapped to another folder. For instance : User 1, Group A X: --> C:\data\A User 2, Group A X: --> C:\data\A User 3, Group B X: --> C:\data\B User 4, Group C X: --> C:\data\C Is this possible. If so, how do I configure the virtual drive mapping so that the user has nothing special to do; i.e. I want the letter X: to be available to Remote Apps launched by the user, or if the user logs in to the remote desktop. Can I somehow use subst to get this to work? I would like to avoid, if possible, mounting drive letters on local shares (i.e. I don't like the idea of having to go through \\localhost\data-A to reach the user's data).

    Read the article

  • How to manually patch Blogger template to use Disqus

    - by user317944
    I'm trying to add disqus to my blog and I tried following this guide to do so: http://disqus.com/docs/patch-blogger/ However their instructions are completely off with what I have on my custom template. Here is the template: <b:skin><![CDATA[/*----------------------------------------------- Blogger Template Style Name: Picture Window Designer: Josh Peterson URL: www.noaesthetic.com ----------------------------------------------- */ /* Variable definitions ==================== */ /* Content ----------------------------------------------- */ body { font: $(body.font); color: $(body.text.color); } html body .region-inner { min-width: 0; max-width: 100%; width: auto; } .content-outer { font-size: 90%; } a:link { text-decoration:none; color: $(link.color); } a:visited { text-decoration:none; color: $(link.visited.color); } a:hover { text-decoration:underline; color: $(link.hover.color); } .body-fauxcolumn-outer { background: $(body.background); } .content-outer { background: $(content.background); -moz-border-radius: $(content.border.radius); -webkit-border-radius: $(content.border.radius); -goog-ms-border-radius: $(content.border.radius); border-radius: $(content.border.radius); -moz-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); margin: $(content.margin) auto; } .content-inner { padding: $(content.padding); } /* Header ----------------------------------------------- */ .header-outer { background: $(header.background.color) $(header.background.gradient) repeat-x scroll top left; _background-image: none; color: $(header.text.color); -moz-border-radius: $(header.border.radius); -webkit-border-radius: $(header.border.radius); -goog-ms-border-radius: $(header.border.radius); border-radius: $(header.border.radius); } .Header img, .Header #header-inner { -moz-border-radius: $(header.border.radius); -webkit-border-radius: $(header.border.radius); -goog-ms-border-radius: $(header.border.radius); border-radius: $(header.border.radius); } .header-inner .Header .titlewrapper, .header-inner .Header .descriptionwrapper { padding-left: $(header.padding); padding-right: $(header.padding); } .Header h1 { font: $(header.font); text-shadow: 1px 1px 3px rgba(0, 0, 0, 0.3); } .Header h1 a { color: $(header.text.color); } .Header .description { font-size: 130%; } /* Tabs ----------------------------------------------- */ .tabs-inner { margin: .5em $(tabs.margin.sides) $(tabs.margin.bottom); padding: 0; } .tabs-inner .section { margin: 0; } .tabs-inner .widget ul { padding: 0; background: $(tabs.background.color) $(tabs.background.gradient) repeat scroll bottom; -moz-border-radius: $(tabs.border.radius); -webkit-border-radius: $(tabs.border.radius); -goog-ms-border-radius: $(tabs.border.radius); border-radius: $(tabs.border.radius); } .tabs-inner .widget li { border: none; } .tabs-inner .widget li a { display: block; padding: .5em 1em; margin-$endSide: $(tabs.spacing); color: $(tabs.text.color); font: $(tabs.font); -moz-border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; -webkit-border-top-left-radius: $(tab.border.radius); -webkit-border-top-right-radius: $(tab.border.radius); -goog-ms-border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; background: $(tab.background); border-$endSide: 1px solid $(tabs.separator.color); } .tabs-inner .widget li:first-child a { padding-$startSide: 1.25em; -moz-border-radius-top$startSide: $(tab.first.border.radius); -moz-border-radius-bottom$startSide: $(tabs.border.radius); -webkit-border-top-$startSide-radius: $(tab.first.border.radius); -webkit-border-bottom-$startSide-radius: $(tabs.border.radius); -goog-ms-border-top-$startSide-radius: $(tab.first.border.radius); -goog-ms-border-bottom-$startSide-radius: $(tabs.border.radius); border-top-$startSide-radius: $(tab.first.border.radius); border-bottom-$startSide-radius: $(tabs.border.radius); } .tabs-inner .widget li.selected a, .tabs-inner .widget li a:hover { position: relative; z-index: 1; background: $(tabs.selected.background.color) $(tab.selected.background.gradient) repeat scroll bottom; color: $(tabs.selected.text.color); -moz-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); } /* Headings ----------------------------------------------- */ h2 { font: $(widget.title.font); text-transform: $(widget.title.text.transform); color: $(widget.title.text.color); margin: .5em 0; } /* Main ----------------------------------------------- */ .main-outer { background: $(main.background); -moz-border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; -webkit-border-top-left-radius: $(main.border.radius.top); -webkit-border-top-right-radius: $(main.border.radius.top); -webkit-border-bottom-left-radius: 0; -webkit-border-bottom-right-radius: 0; -goog-ms-border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; -moz-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); } .main-inner { padding: 15px $(main.padding.sides) 20px; } .main-inner .column-center-inner { padding: 0 0; } .main-inner .column-left-inner { padding-left: 0; } .main-inner .column-right-inner { padding-right: 0; } /* Posts ----------------------------------------------- */ h3.post-title { margin: 0; font: $(post.title.font); } .comments h4 { margin: 1em 0 0; font: $(post.title.font); } .post-outer { background-color: $(post.background.color); border: solid 1px $(post.border.color); -moz-border-radius: $(post.border.radius); -webkit-border-radius: $(post.border.radius); border-radius: $(post.border.radius); -goog-ms-border-radius: $(post.border.radius); padding: 15px 20px; margin: 0 $(post.margin.sides) 20px; } .post-body { line-height: 1.4; font-size: 110%; } .post-header { margin: 0 0 1.5em; color: $(post.footer.text.color); line-height: 1.6; } .post-footer { margin: .5em 0 0; color: $(post.footer.text.color); line-height: 1.6; } blog-pager { font-size: 140% } comments .comment-author { padding-top: 1.5em; border-top: dashed 1px #ccc; border-top: dashed 1px rgba(128, 128, 128, .5); background-position: 0 1.5em; } comments .comment-author:first-child { padding-top: 0; border-top: none; } .avatar-image-container { margin: .2em 0 0; } /* Widgets ----------------------------------------------- */ .widget ul, .widget #ArchiveList ul.flat { padding: 0; list-style: none; } .widget ul li, .widget #ArchiveList ul.flat li { border-top: dashed 1px #ccc; border-top: dashed 1px rgba(128, 128, 128, .5); } .widget ul li:first-child, .widget #ArchiveList ul.flat li:first-child { border-top: none; } .widget .post-body ul { list-style: disc; } .widget .post-body ul li { border: none; } /* Footer ----------------------------------------------- */ .footer-outer { color:$(footer.text.color); background: $(footer.background); -moz-border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); -webkit-border-top-left-radius: $(footer.border.radius.top); -webkit-border-top-right-radius: $(footer.border.radius.top); -webkit-border-bottom-left-radius: $(footer.border.radius.bottom); -webkit-border-bottom-right-radius: $(footer.border.radius.bottom); -goog-ms-border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); -moz-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); } .footer-inner { padding: 10px $(main.padding.sides) 20px; } .footer-outer a { color: $(footer.link.color); } .footer-outer a:visited { color: $(footer.link.visited.color); } .footer-outer a:hover { color: $(footer.link.hover.color); } .footer-outer .widget h2 { color: $(footer.widget.title.text.color); } ]] <b:template-skin> <b:variable default='930px' name='content.width' type='length' value='930px'/> <b:variable default='0' name='main.column.left.width' type='length' value='180px'/> <b:variable default='360px' name='main.column.right.width' type='length' value='180px'/> <![CDATA[ body { min-width: $(content.width); } .content-outer, .region-inner { min-width: $(content.width); max-width: $(content.width); _width: $(content.width); } .main-inner .columns { padding-left: $(main.column.left.width); padding-right: $(main.column.right.width); } .main-inner .fauxcolumn-center-outer { left: $(main.column.left.width); right: $(main.column.right.width); /* IE6 does not respect left and right together */ _width: expression(this.parentNode.offsetWidth - parseInt("$(main.column.left.width)") - parseInt("$(main.column.right.width)") + 'px'); } .main-inner .fauxcolumn-left-outer { width: $(main.column.left.width); } .main-inner .fauxcolumn-right-outer { width: $(main.column.right.width); } .main-inner .column-left-outer { width: $(main.column.left.width); right: $(main.column.left.width); margin-right: -$(main.column.left.width); } .main-inner .column-right-outer { width: $(main.column.right.width); margin-right: -$(main.column.right.width); } #layout { min-width: 0; } #layout .content-outer { min-width: 0; width: 800px; } #layout .region-inner { min-width: 0; width: auto; } ]]> </b:template-skin> <div class='main-cap-bottom cap-bottom'> <div class='cap-left'/> <div class='cap-right'/> </div> </div> <footer> <div class='footer-outer'> <div class='footer-cap-top cap-top'> <div class='cap-left'/> <div class='cap-right'/> </div> <div class='fauxborder-left footer-fauxborder-left'> <div class='fauxborder-right footer-fauxborder-right'/> <div class='region-inner footer-inner'> <macro:include id='footer-sections' name='sections'> <macro:param default='2' name='num' value='3'/> <macro:param default='footer' name='idPrefix'/> <macro:param default='foot' name='class'/> <macro:param default='false' name='includeBottom'/> </macro:include> <!-- outside of the include in order to lock Attribution widget --> <b:section class='foot' id='footer-3' showaddelement='no'> document.body.className = document.body.className.replace('loading', ''); <macro:if cond='data:col.num &gt;= 2'> <table border='0' cellpadding='0' cellspacing='0' mexpr:class='&quot;section-columns columns-&quot; + data:col.num'> <tbody> <tr> <td class='first columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-2-1&quot;'/> </td> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-2-2&quot;'/> </td> <macro:if cond='data:col.num &gt;= 3'> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-2-3&quot;'/> </td> </macro:if> <macro:if cond='data:col.num &gt;= 4'> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-2-4&quot;'/> </td> </macro:if> </tr> </tbody> </table> <macro:if cond='data:col.includeBottom'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-3&quot;' showaddelement='no'/> </macro:if> </macro

    Read the article

  • Json.Net Issues: StackOverflowException is thrown when serialising circular dependent ISerializable object with ReferenceLoopHandling.Ignore

    - by keyr
    I have a legacy application that used binary serialisation to persist the data. Now we wanted to use Json.net 4.5 to serialise the data without much changes to the existing classes. Things were working nice till we hit a circular dependent class. Is there any workaround to solve this problem? Sample code as shown below [Serializable] class Department : ISerializable { public Employee Manager { get; set; } public string Name { get; set; } public Department() { } public Department( SerializationInfo info, StreamingContext context ) { Manager = ( Employee )info.GetValue( "Manager", typeof( Employee ) ); Name = ( string )info.GetValue( "Name", typeof( string ) ); } public void GetObjectData( SerializationInfo info, StreamingContext context ) { info.AddValue( "Manager", Manager ); info.AddValue( "Name", Name ); } } [Serializable] class Employee : ISerializable { [NonSerialized] //This does not work [XmlIgnore]//This does not work private Department mDepartment; public Department Department { get { return mDepartment; } set { mDepartment = value; } } public string Name { get; set; } public Employee() { } public Employee( SerializationInfo info, StreamingContext context ) { Department = ( Department )info.GetValue( "Department", typeof( Department ) ); Name = ( string )info.GetValue( "Name", typeof( string ) ); } public void GetObjectData( SerializationInfo info, StreamingContext context ) { info.AddValue( "Department", Department ); info.AddValue( "Name", Name ); } } And the test code Department department = new Department(); department.Name = "Dept1"; Employee emp1 = new Employee { Name = "Emp1", Department = department }; department.Manager = emp1; Employee emp2 = new Employee() { Name = "Emp2", Department = department }; IList<Employee> employees = new List<Employee>(); employees.Add( emp1 ); employees.Add( emp2 ); var memoryStream = new MemoryStream(); var formatter = new BinaryFormatter(); formatter.Serialize( memoryStream, employees ); memoryStream.Seek( 0, SeekOrigin.Begin ); IList<Employee> deserialisedEmployees = formatter.Deserialize( memoryStream ) as IList<Employee>; //Works nicely JsonSerializerSettings jsonSS= new JsonSerializerSettings(); jsonSS.TypeNameHandling = TypeNameHandling.Objects; jsonSS.TypeNameAssemblyFormat = FormatterAssemblyStyle.Full; jsonSS.Formatting = Formatting.Indented; jsonSS.ReferenceLoopHandling = ReferenceLoopHandling.Ignore; //This is not working!! //jsonSS.ReferenceLoopHandling = ReferenceLoopHandling.Serialize; //This is also not working!! jsonSS.PreserveReferencesHandling = PreserveReferencesHandling.All; string jsonAll = JsonConvert.SerializeObject( employees, jsonSS ); //Throws stackoverflow exception Edit1: The issue has been reported to Json (http://json.codeplex.com/workitem/23668)

    Read the article

  • ModSecurity compile error on nginx

    - by user146481
    I'm trying to install ModSecurity on nginx with the following instructions : wget https://github.com/SpiderLabs/ModSecurity/archive/master.zip unzip master cd ModSecurity-master ./autogen.sh ./configure --enable-standalone-module And i got the following error : Checking plataform... Identified as Linux configure: looking for Apache module support via DSO through APXS configure: error: couldn't find APXS After installing httpd-devel httpd-devel and running ./configure --enable-standalone-module --with-apxs=/usr/sbin/apxs ; make modsecurity compile workes but still have another error of nginx compilation : ./configure --add-module=/usr/local/src/john/ModSecurity-master/nginx/modsecurity and i got this error : gcc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I /usr/include/apache2 -I /usr/include/apr-1.0 -I /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone -I /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2 -I /usr/include/libxml2 -I objs -I src/http -I src/http/modules -I src/mail \ -o objs/addon/modsecurity/ngx_http_modsecurity.o \ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:20:23: error: http_core.h: No such file or directory /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:21:26: error: http_request.h: No such file or directory In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:37, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_logging.h:41:23: error: apr_pools.h: No such file or directory In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:38, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_multipart.h:26:25: error: apr_general.h: No such file or directory /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_multipart.h:27:24: error: apr_tables.h: No such file or directory In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:38, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_multipart.h:44: error: expected specifier-qualifier-list before ‘apr_array_header_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_multipart.h:65: error: expected specifier-qualifier-list before ‘apr_array_header_t’ cc1: warnings being treated as errors /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_multipart.h:135: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_multipart.h:135: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_multipart.h:135: error: expected ‘,’ or ‘;’ before ‘multipart_cleanup’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_multipart.h:137: error: expected declaration specifiers or ‘...’ before ‘apr_table_t’ In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:39, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_pcre.h:41: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_pcre.h:45: error: expected ‘)’ before ‘*’ token In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:40, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:19:27: error: apr_file_info.h: No such file or directory In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:41, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:29, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:40, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/persist_dbm.h:21: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/persist_dbm.h:21: error: type defaults to ‘int’ in declaration of ‘apr_table_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/persist_dbm.h:21: error: expected ‘,’ or ‘;’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/persist_dbm.h:24: error: expected declaration specifiers or ‘...’ before ‘apr_table_t’ In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:42, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:29, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:40, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:20:19: error: httpd.h: No such file or directory /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:21:24: error: ap_release.h: No such file or directory /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:24:26: error: apr_optional.h: No such file or directory In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:42, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:29, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:40, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:30: error: expected declaration specifiers or ‘...’ before ‘modsec_register_tfn’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:30: error: expected declaration specifiers or ‘...’ before ‘(’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:30: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:30: error: type defaults to ‘int’ in declaration of ‘APR_DECLARE_OPTIONAL_FN’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:31: error: expected declaration specifiers or ‘...’ before ‘modsec_register_operator’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:31: error: expected declaration specifiers or ‘...’ before ‘(’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:31: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:31: error: type defaults to ‘int’ in declaration of ‘APR_DECLARE_OPTIONAL_FN’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:32: error: expected declaration specifiers or ‘...’ before ‘modsec_register_variable’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:33: error: expected declaration specifiers or ‘...’ before ‘(’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:32: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:36: error: type defaults to ‘int’ in declaration of ‘APR_DECLARE_OPTIONAL_FN’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:37: error: expected declaration specifiers or ‘...’ before ‘modsec_register_reqbody_processor’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:37: error: expected declaration specifiers or ‘...’ before ‘(’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:37: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:37: error: type defaults to ‘int’ in declaration of ‘APR_DECLARE_OPTIONAL_FN’ In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:42, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:29, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:40, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:56: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:58: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:65: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:65: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:65: error: expected ‘,’ or ‘;’ before ‘input_filter’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:68: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:68: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:68: error: expected ‘,’ or ‘;’ before ‘output_filter’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:70: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:70: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:70: error: expected ‘,’ or ‘;’ before ‘read_request_body’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:77: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:77: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:77: error: expected ‘,’ or ‘;’ before ‘send_error_bucket’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:83: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:85: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:93: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/apache2.h:95: error: expected ‘)’ before ‘*’ token In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:29, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:40, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:43:25: error: http_config.h: No such file or directory In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:29, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:40, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:59: error: expected declaration specifiers or ‘...’ before ‘apr_array_header_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:61: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:61: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:61: error: expected ‘,’ or ‘;’ before ‘collection_original_setvar’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:63: error: expected declaration specifiers or ‘...’ before ‘apr_pool_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:67: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:70: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:75: error: expected declaration specifiers or ‘...’ before ‘apr_array_header_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:76: error: expected declaration specifiers or ‘...’ before ‘apr_pool_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:86: error: expected specifier-qualifier-list before ‘apr_pool_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:94: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:101: error: expected specifier-qualifier-list before ‘apr_pool_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:111: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:111: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:111: error: expected ‘,’ or ‘;’ before ‘msre_ruleset_process_phase’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:113: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:113: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:113: error: expected ‘,’ or ‘;’ before ‘msre_ruleset_process_phase_internal’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:115: error: expected declaration specifiers or ‘...’ before ‘apr_pool_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:143: error: expected specifier-qualifier-list before ‘apr_ipsubnet_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:149: error: expected specifier-qualifier-list before ‘apr_array_header_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:189: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:219: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:235: error: expected specifier-qualifier-list before ‘fn_tfn_execute_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:239: error: expected declaration specifiers or ‘...’ before ‘fn_tfn_execute_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:258: error: expected declaration specifiers or ‘...’ before ‘apr_table_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:258: error: expected declaration specifiers or ‘...’ before ‘apr_pool_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:285: error: expected specifier-qualifier-list before ‘apr_table_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:341: error: expected declaration specifiers or ‘...’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:341: error: type defaults to ‘int’ in declaration of ‘apr_status_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:341: error: ‘apr_status_t’ declared as function returning a function /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:341: error: ‘apr_status_t’ redeclared as different kind of symbol /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:113: note: previous declaration of ‘apr_status_t’ was here /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:342: error: expected declaration specifiers or ‘...’ before ‘apr_pool_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:342: error: ‘fn_action_execute_t’ declared as function returning a function /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:369: error: expected specifier-qualifier-list before ‘fn_action_init_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:399: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:403: error: expected declaration specifiers or ‘...’ before ‘apr_array_header_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:403: error: ‘msre_parse_vars’ declared as function returning a function /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/re.h:415: error: expected specifier-qualifier-list before ‘apr_size_t’ In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:40, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:54: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:62: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:66: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:68: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:70: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:74: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:76: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:82: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:88: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:90: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:92: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:100: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:102: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:104: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:106: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:108: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:110: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:112: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:114: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:128: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:132: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:136: error: expected ‘)’ before ‘*’ token /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:140: error: data definition has no type or storage class /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:140: error: type defaults to ‘int’ in declaration of ‘apr_fileperms_t’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:140: error: expected ‘,’ or ‘;’ before ‘mode2fileperms’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_util.h:144: error: expected declaration specifiers or ‘...’ before ‘apr_pool_t’ In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:41, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_xml.h:43: error: ‘xml_cleanup’ declared as function returning a function In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:42, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_geo.h:38:25: error: apr_file_io.h: No such file or directory In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:42, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_geo.h:58: error: expected specifier-qualifier-list before ‘apr_file_t’ In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:43, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_gsb.h:22:22: error: apr_hash.h: No such file or directory In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:43, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_gsb.h:25: error: expected specifier-qualifier-list before ‘apr_file_t’ In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:44, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_unicode.h:25: error: expected specifier-qualifier-list before ‘apr_file_t’ In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:46, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/msc_crypt.h:34: error: expected ‘)’ before ‘*’ token In file included from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../standalone/api.h:23, from /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:28: /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:48:23: error: ap_config.h: No such file or directory /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:49:21: error: apr_md5.h: No such file or directory /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:50:25: error: apr_strings.h: No such file or directory /usr/local/src/john/ModSecurity-master/nginx/modsecurity/../../apache2/modsecurity.h:54:22: error: http_log.h: No such file or directory /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:938: error: ‘ngx_http_modsecurity_ctx_t’ has no member named ‘req’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:938: error: too many arguments to function ‘ConvertNgxStringToUTF8’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:942: error: ‘ngx_http_modsecurity_ctx_t’ has no member named ‘req’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:944: error: ‘ngx_http_modsecurity_ctx_t’ has no member named ‘req’ /usr/local/src/john/ModSecurity-master/nginx/modsecurity/ngx_http_modsecurity.c:952: error: ‘modsecurity_read_body_cb’ undeclared (first use in this function) make[1]: *** [objs/addon/modsecurity/ngx_http_modsecurity.o] Error 1 make[1]: Leaving directory `/usr/local/src/john/nginx-1.2.5' make: *** [build] Error 2 Note : I'm using nginx as the only webserver and i do not have apache installed. OS : Centos 6 64bit How can i solve this problem And do you have another easy way to install modsecurity with nginx ?

    Read the article

  • Plot numpy datetime64 with matplotlib

    - by enedene
    I have two numpy arrays 1D, one is time of measurement in datetime64 format, for example: array([2011-11-15 01:08:11, 2011-11-16 02:08:04, ..., 2012-07-07 11:08:00], dtype=datetime64[us]) and other array of same length and dimension with integer data. I'd like to make a plot in matplotlib time vs data. If I put the data directly, this is what I get: plot(timeSeries, data) Is there a way to get time in more natural units? For example in this case months/year would be fine.

    Read the article

  • Unity.ResolutionFailedException - Resolution of the dependency failed

    - by Anibas
    I have the following code: public static IEngine CreateEngine() { UnityContainer container = Unity.LoadUnityContainer(DefaultStrategiesContainerName); IEnumerable<IStrategy> strategies = container.ResolveAll<IStrategy>(); ITraderProvider provider = container.Resolve<ITraderProvider>(); return new Engine(provider, new List<IStrategy>(strategies)); } and the config: <unity> <typeAliases> <typeAlias alias="singleton" type="Microsoft.Practices.Unity.ContainerControlledLifetimeManager, Microsoft.Practices.Unity" /> <typeAlias alias="weakRef" type="Microsoft.Practices.Unity.ExternallyControlledLifetimeManager, Microsoft.Practices.Unity" /> <typeAlias alias="Strategy" type="ADTrader.Core.Contracts.IStrategy, ADTrader.Core" /> <typeAlias alias="Trader" type="ADTrader.Core.Contracts.ITraderProvider, ADTrader.Core" /> </typeAliases> <containers> <container name="strategies"> <types> <type type="Strategy" mapTo="ADTrader.Strategies.ThreeTurningStrategy, ADTrader.Strategies" name="1" /> <type type="Trader" mapTo="ADTrader.MbTradingProvider.MBTradingProvider, ADTrader.MbTradingProvider" /> </types> </container> </containers></unity> I am getting the following exception: Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "ADTrader.Core.Contracts.ITraderProvider", name = "". Exception message is: The current build operation (build key Build Key[ADTrader.MbTradingProvider.MBTradingProvider, null]) failed: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Strategy type BuildPlanStrategy, index 3) --- Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[ADTrader.MbTradingProvider.MBTradingProvider, null]) failed: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Strategy type BuildPlanStrategy, index 3) --- System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at MBTCOMLib.MbtComMgrClass.EnableSplash(Boolean bEnable) at ADTrader.MbTradingProvider.MBTradingProvider..ctor() at BuildUp_ADTrader.MbTradingProvider.MBTradingProvider(IBuilderContext ) at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) --- End of inner exception stack trace --- at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing) at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name) --- End of inner exception stack trace --- at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name) at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name) at Microsoft.Practices.Unity.UnityContainerBase.ResolveT at ADTrader.Engine.EngineFactory.CreateEngine() Any idea?

    Read the article

  • how to set custom interval to horizontal axis in Flex Charts

    - by Ali Syed
    Hello folks, I am trying to set custom step (interval) to my Line Chart's horizontal axis. The chart gets its data from a grid. The grid has a lot of data and it is displayed accurately but because there are so many data points the horizontal axis is screwed up. I wanted to set a step on horizontal axis so that you get an idea when you see the graph without hovering the mouse on a data point! thanks for any help! -Ali Flexi Comment Box

    Read the article

  • How to automatically resize an EditText widget (with some attributes) in a TableLayout

    - by steff
    Hi everyone, I have a layout issue. What I do is this: create TableLayout in xml with zero children: <TableLayout android:id="@+id/t_layout_contents" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_below="@id/l_layout_tags" android:stretchColumns="1" android:paddingLeft="5dip" android:paddingRight="5dip" /> Insert first row programmatically in onCreate(): tLayoutContents = (TableLayout)findViewById(R.id.t_layout_contents); NoteElement nr_1 = new NoteElement(this); tLayoutContents.addView(nr_1); Class "NoteElement" extends TableRow. The 1st row just consists of a blank ImageView as a placeholder and an EditText to enter text. NoteElement's constructor looks like this: public NoteElement(Context c) { super(c); this.context = c; defaultText = c.getResources().getString(R.string.create_note_help_text); imageView = new ImageView(context); imageView.setImageResource(android.R.color.transparent); LayoutParams params = new LayoutParams(0); imageView.setLayoutParams(params); addView(imageView); addView(addTextField()); } Method addTextField() specifies the attributes for the EditText widget: private EditText addTextField() { editText = new EditText(context); editText.setImeOptions(EditorInfo.IME_ACTION_DONE); editText.setMinLines(4); editText.setRawInputType(InputType.TYPE_TEXT_FLAG_MULTI_LINE); editText.setHint(R.string.create_note_et_blank_text); editText.setAutoLinkMask(Linkify.ALL); editText.setPadding(5, 0, 0, 0); editText.setGravity(Gravity.TOP); editText.setVerticalScrollBarEnabled(true); LayoutParams params = new LayoutParams(1); editText.setLayoutParams(params); return editText; } So far, so good. But my problem occurs as soon as the available space for the chars is depleted. The EditText does not resize itself but switches to a single line EditText. I am desperatly looking for a way in which the EditText resizes itself in its height dynamically, being dependant on the inserted text length. Does anyone have a hint on this? Thanks & regards, steff

    Read the article

  • Mac - Flash file not loaded in independent flash player

    - by Mugdha
    Hi, I am working on an independent application to play flash files on Mac. I have already done the same for Linux, and it works flawlessly but on mac for some reason flash is not drawing to my window. It is not throwing any kind of error too. I am using Flash player 10, that would mean that I am using the Core Graphics drawing model. I am able to send mouse events to flash and wrote a sample plugin to check if there was a problem in the context that I was sending, but my sample plugin draws properly to the window. I am getting a call for NPN_InvalidateRect twice and as a response I send an update Event back to flash. I drew a dummy rectangle to check that my context is correct. I have flipped the context to make the origin as top left corner. On doing right click on the debug version of the flash player it shows the following message: "Movie not loaded..." Can anyone give me any idea why is the content not being drawn? I would really appreciate the help, as I have been struggling with it for more than a month now. Here is a small log of the interaction that I have with flash: NPN_UserAgent Called NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPN_GetValue Called with variable NPNVSupportsWindowless; return true NPN_SetValue Called for Variable - NPPVpluginTransparentBool; return true NPN_GetValue Called with variable NPNVsupportsCoreGraphicsBool; return true NPN_SetValue Called for Variable - NPNVpluginDrawingModel NPP_SetWindow (CoreGraphics): 0, window=0xebaa90, context=0xe4c930, window.x:0 window.y:22 window.width:480 window.height:270 NPP_HandleEvent(activateEvent) accepted:0 isActive: 1 NPP_HandleEvent(updateEvt) accepted: 1 NPN_UserAgent Called NPN_GetURLNotify Called with URL - javascript:top.location+"flashplugin_unique" NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPP_NewStream URL=/Users/mjain/Desktop/clock.swf MIME=application/x-shockwave-flash error=0 NPP_WriteReady responseURL=/Users/mjain/Desktop/clock.swf bytes=268435455 NPN_InvalidateRect Called NPP_Write responseURL=/Users/mjain/Desktop/clock.swf bytes=9925 total-delivered=9925/9925 NPP_WriteReady responseURL=/Users/mjain/Desktop/clock.swf bytes=268435455 NPP_DestroyStream responseURL=/Users/mjain/Desktop/clock.swf error=0 NPP_HandleEvent(updateEvt) accepted: 1 NPN_InvalidateRect Called NPP_HandleEvent(updateEvt) accepted: 1 NPP_NewStream URL=javascript:top.location+"flashplugin_unique" MIME=text/plain error=0 NPP_WriteReady responseURL=javascript:top.location+"flashplugin_unique" bytes=16000 NPN_UserAgent Called NPP_Write responseURL=javascript:top.location+"flashplugin_unique" bytes=52 total-delivered=52/52 NPP_WriteReady responseURL=javascript:top.location+"flashplugin_unique" bytes=16000 NPP_DestroyStream responseURL=javascript:top.location+"flashplugin_unique" error=0 NPP_URLNotify responseURL=javascript:top.location+"flashplugin_unique" reason=0 Thanks Mugdha.

    Read the article

  • Using str_replace with smarty variable

    - by zx
    Hello, Basically I just want to strip out a part of my smarty variable contents. {foreach from=$_sequences key=k item=v} {if $v.pri == $smarty.get.cf && $v.type == 'TTS'} {$v.data} {/if} {/foreach} {$v.data} will echo out 21,5555555555 I want it to only echo out 5555555555. I tried str_replace but couldn't get it working.. str_replace('"','',${v.data});// - doesn't work str_replace('"','',$v.data);// - doesn't work What would be the best way I can accomplish this?

    Read the article

  • java 7 upgrade and hibernate annotation processor error

    - by Bill Turner
    I am getting the following warning, which seems to be triggering a subsequent warning and an error. I have been googling like mad, though have not found anything that makes it clear what it is I should do to resolve this. This issue occurs when I execute an Ant build. I am trying to migrate our project to Java 7. I have changed all the source='1.6' and target="1.6" to 1.7. I did find this related article: Forward compatible Java 6 annotation processor and SupportedSourceVersion It seems to indicate that I should build the Hibernate annotation processor jar myself, compiling it with with 1.7. It does not seem I should be required to do so. The latest version of the class in question (in hibernate-validator-annotation-processor-5.0.1.Final.jar) has been compiled with 1.6. Since the code in said class refers to SourceVersion.latestSupported(), and the 1.6 of that returns only RELEASE_6, there does not seem to be a generally available solution. Here is the warning: [javac] warning: Supported source version 'RELEASE_6' from annotation processor 'org.hibernate.validator.ap.ConstraintValidationProcessor' less than -source '1.7' And, here are the subsequent warnings/error. [javac] warning: No processor claimed any of these annotations: javax.persistence.PersistenceContext,javax.persistence.Column,org.codehaus.jackson.annotate.JsonIgnore,javax.persistence.Id,org.springframework.context.annotation.DependsOn,com.trgr.cobalt.infrastructure.datasource.Bucketed,org.codehaus.jackson.map.annotate.JsonDeserialize,javax.persistence.DiscriminatorColumn,com.trgr.cobalt.dataroom.authorization.secure.Secured,org.hibernate.annotations.GenericGenerator,javax.annotation.Resource,com.trgr.cobalt.infrastructure.spring.domain.DomainField,org.codehaus.jackson.annotate.JsonAutoDetect,javax.persistence.DiscriminatorValue,com.trgr.cobalt.dataroom.datasource.config.core.CoreTransactionMandatory,org.springframework.stereotype.Repository,javax.persistence.GeneratedValue,com.trgr.cobalt.dataroom.datasource.config.core.CoreTransactional,org.hibernate.annotations.Cascade,javax.persistence.Table,javax.persistence.Enumerated,org.hibernate.annotations.FilterDef,javax.persistence.OneToOne,com.trgr.cobalt.dataroom.datasource.config.core.CoreEntity,org.springframework.transaction.annotation.Transactional,com.trgr.cobalt.infrastructure.util.enums.EnumConversion,org.springframework.context.annotation.Configuration,com.trgr.cobalt.infrastructure.spring.domain.UpdatedFields,com.trgr.cobalt.infrastructure.spring.documentation.SampleValue,org.springframework.context.annotation.Bean,org.codehaus.jackson.annotate.JsonProperty,javax.persistence.Basic,org.codehaus.jackson.map.annotate.JsonSerialize,com.trgr.cobalt.infrastructure.spring.validation.Required,com.trgr.cobalt.dataroom.datasource.config.core.CoreTransactionNever,org.springframework.context.annotation.Profile,com.trgr.cobalt.infrastructure.spring.stereotype.Persistor,javax.persistence.Transient,com.trgr.cobalt.infrastructure.spring.validation.NotNull,javax.validation.constraints.Size,javax.persistence.Entity,javax.persistence.PrimaryKeyJoinColumn,org.hibernate.annotations.BatchSize,org.springframework.stereotype.Service,org.springframework.beans.factory.annotation.Value,javax.persistence.Inheritance [javac] error: warnings found and -Werror specified TIA!

    Read the article

  • System.InvalidOperationException compiling ASP.NET app on Mono

    - by Radu094
    This is the error I get when I start my ASP.NET application in Mono: System.InvalidOperationException: The process must exit before getting the requested information. at System.Diagnostics.Process.get_ExitCode () [0x00044] in /usr/src/mono-2.6.3/mcs/class/System/System.Diagnostics/Process.cs:149 at (wrapper remoting-invoke-with-check) System.Diagnostics.Process:get_ExitCode () at Mono.CSharp.CSharpCodeCompiler.CompileFromFileBatch (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x001ee] in /usr/src/mono-2.6.3/mcs/class/System/Microsoft.CSharp/CSharpCodeCompiler.cs:267 at Mono.CSharp.CSharpCodeCompiler.CompileAssemblyFromFileBatch (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00011] in /usr/src/mono-2.6.3/mcs/class/System/Microsoft.CSharp/CSharpCodeCompiler.cs:156 at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromFile (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00014] in /usr/src/mono-2.6.3/mcs/class/System/System.CodeDom.Compiler/CodeDomProvider.cs:119 at System.Web.Compilation.AssemblyBuilder.BuildAssembly (System.Web.VirtualPath virtualPath, System.CodeDom.Compiler.CompilerParameters options) [0x0022f] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.Compilation/AssemblyBuilder.cs:804 at System.Web.Compilation.AssemblyBuilder.BuildAssembly (System.Web.VirtualPath virtualPath) [0x00000] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.Compilation/AssemblyBuilder.cs:730 at System.Web.Compilation.BuildManager.GenerateAssembly (System.Web.Compilation.AssemblyBuilder abuilder, System.Web.Compilation.BuildProviderGroup group, System.Web.VirtualPath vp, Boolean debug) [0x00254] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.Compilation/BuildManager.cs:624 at System.Web.Compilation.BuildManager.BuildInner (System.Web.VirtualPath vp, Boolean debug) [0x0011c] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.Compilation/BuildManager.cs:411 at System.Web.Compilation.BuildManager.Build (System.Web.VirtualPath vp) [0x00050] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.Compilation/BuildManager.cs:356 at System.Web.Compilation.BuildManager.GetCompiledType (System.Web.VirtualPath virtualPath) [0x0003a] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.Compilation/BuildManager.cs:803 at System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath (System.Web.VirtualPath virtualPath, System.Type requiredBaseType) [0x0000c] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.Compilation/BuildManager.cs:500 at System.Web.UI.PageParser.GetCompiledPageInstance (System.String virtualPath, System.String inputFile, System.Web.HttpContext context) [0x0001c] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.UI/PageParser.cs:161 at System.Web.UI.PageHandlerFactory.GetHandler (System.Web.HttpContext context, System.String requestType, System.String url, System.String path) [0x00000] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web.UI/PageHandlerFactory.cs:45 at System.Web.HttpApplication.GetHandler (System.Web.HttpContext context, System.String url, Boolean ignoreContextHandler) [0x00055] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web/HttpApplication.cs:1643 at System.Web.HttpApplication.GetHandler (System.Web.HttpContext context, System.String url) [0x00000] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web/HttpApplication.cs:1624 at System.Web.HttpApplication+<Pipeline>c__Iterator2.MoveNext () [0x0075f] in /usr/src/mono-2.6.3/mcs/class/System.Web/System.Web/HttpApplication.cs:1259 I checked the source code indicated by the stacktrace, namely :CSharpCodeCompiler.cs:267 mcs.WaitForExit(); result.NativeCompilerReturnValue = mcs.ExitCode; //this throws the exception I have no ideea if this is a bug in Mono, or if my App is doing something it shoudn't. A simple "Hello World" application indicates that Mono is properly installed and working, It is just my app that is causing this exception to be thrown. Hoping some enlighted minds have more on the issue

    Read the article

  • How to add Silverlight 4 ContextMenu to DataGrid row or column?

    - by Simon_Weaver
    Silverlight 4 has a new ContextMenu control in the latest toolkit. I can't find ANY examples anywhere on how to reliably use this ContextMenu on a DataGrid. Theres a tonne of context menus out there but I want to use the new version from the toolkit. I'd like to be able to set context menus for rows and cells. Everything I've tries ends up being bound to the wrong item in the grid after scrolling.

    Read the article

  • problem in display image with loadDataWithBaseURL() in Android

    - by Addy
    Hi. In my Application, I display data in webview but it can't display the images in the webview. I used loadDatawithBaseURL() method. This is my code.. webview.loadDataWithBaseURL("file:///059600656X/", data, "text/html", "UTF-8", "about:blank"); // here data is a string object which contain html parsing data. I think it cant find the images in given directory. Can Anybody help me?

    Read the article

  • C# serial port driver wrapper class code and concept quality

    - by Ruben Trancoso
    Hi folks, Would like to know from all you guys what you think about my Serial Wrapper class. Had be a while I've beem working with serial port but never shared the code what somekind make closed to my very own vision. Would like to know if it's a good/bad approach, if the interface is enough and what more you see on it. I know that Stackoverflow is for question but at the same time there's a lot of very good skilled people here and share code and opinion can also bennefit everybody, it's why I decided to post it anyway. thanks! using System.Text; using System.IO; using System.IO.Ports; using System; namespace Driver { class SerialSingleton { // The singleton instance reference private static SerialSingleton instance = null; // System's serial port interface private SerialPort serial; // Current com port identifier private string comPort = null; // Configuration parameters private int confBaudRate; private int confDataBits; private StopBits confStopBits; private Parity confParityControl; ASCIIEncoding encoding = new ASCIIEncoding(); // ================================================================================== // Constructors public static SerialSingleton getInstance() { if (instance == null) { instance = new SerialSingleton(); } return instance; } private SerialSingleton() { serial = new SerialPort(); } // =================================================================================== // Setup Methods public string ComPort { get { return comPort; } set { if (value == null) { throw new SerialException("Serial port name canot be null."); } if (nameIsComm(value)) { close(); comPort = value; } else { throw new SerialException("Serial Port '" + value + "' is not a valid com port."); } } } public void setSerial(string baudRate, int dataBits, StopBits stopBits, Parity parityControl) { if (baudRate == null) { throw new SerialException("Baud rate cannot be null"); } string[] baudRateRef = { "300", "600", "1200", "1800", "2400", "3600", "4800", "7200", "9600", "14400", "19200", "28800", "38400", "57600", "115200" }; int confBaudRate; if (findString(baudRateRef, baudRate) != -1) { confBaudRate = System.Convert.ToInt32(baudRate); } else { throw new SerialException("Baurate parameter invalid."); } int confDataBits; switch (dataBits) { case 5: confDataBits = 5; break; case 6: confDataBits = 6; break; case 7: confDataBits = 7; break; case 8: confDataBits = 8; break; default: throw new SerialException("Databits parameter invalid"); } if (stopBits == StopBits.None) { throw new SerialException("StopBits parameter cannot be NONE"); } this.confBaudRate = confBaudRate; this.confDataBits = confDataBits; this.confStopBits = stopBits; this.confParityControl = parityControl; } // ================================================================================== public string[] PortList { get { return SerialPort.GetPortNames(); } } public int PortCount { get { return SerialPort.GetPortNames().Length; } } // ================================================================================== // Open/Close Methods public void open() { open(comPort); } private void open(string comPort) { if (isOpen()) { throw new SerialException("Serial Port is Already open"); } else { if (comPort == null) { throw new SerialException("Serial Port not defined. Cannot open"); } bool found = false; if (nameIsComm(comPort)) { string portId; string[] portList = SerialPort.GetPortNames(); for (int i = 0; i < portList.Length; i++) { portId = (portList[i]); if (portId.Equals(comPort)) { found = true; break; } } } else { throw new SerialException("The com port identifier '" + comPort + "' is not a valid serial port identifier"); } if (!found) { throw new SerialException("Serial port '" + comPort + "' not found"); } serial.PortName = comPort; try { serial.Open(); } catch (UnauthorizedAccessException uaex) { throw new SerialException("Cannot open a serial port in use by another application", uaex); } try { serial.BaudRate = confBaudRate; serial.DataBits = confDataBits; serial.Parity = confParityControl; serial.StopBits = confStopBits; } catch (Exception e) { throw new SerialException("Serial port parameter invalid for '" + comPort + "'.\n" + e.Message, e); } } } public void close() { if (serial.IsOpen) { serial.Close(); } } // =================================================================================== // Auxiliary private Methods private int findString(string[] set, string search) { if (set != null) { for (int i = 0; i < set.Length; i++) { if (set[i].Equals(search)) { return i; } } } return -1; } private bool nameIsComm(string name) { int comNumber; int.TryParse(name.Substring(3), out comNumber); if (name.Substring(0, 3).Equals("COM")) { if (comNumber > -1 && comNumber < 256) { return true; } } return false; } // ================================================================================= // Device state Methods public bool isOpen() { return serial.IsOpen; } public bool hasData() { int amount = serial.BytesToRead; if (amount > 0) { return true; } else { return false; } } // ================================================================================== // Input Methods public char getChar() { int data = serial.ReadByte(); return (char)data; } public int getBytes(ref byte[] b) { int size = b.Length; char c; int counter = 0; for (counter = 0; counter < size; counter++) { if (tryGetChar(out c)) { b[counter] = (byte)c; } else { break; } } return counter; } public string getStringUntil(char x) { char c; string response = ""; while (tryGetChar(out c)) { response = response + c; if (c == x) { break; } } return response; } public bool tryGetChar(out char c) { c = (char)0x00; byte[] b = new byte[1]; long to = 10; long ft = System.Environment.TickCount + to; while (System.Environment.TickCount < ft) { if (hasData()) { int data = serial.ReadByte(); c = (char)data; return true; } } return false; } // ================================================================================ // Output Methods public void sendString(string data) { byte[] bytes = encoding.GetBytes(data); serial.Write(bytes, 0, bytes.Length); } public void sendChar(char c) { char[] data = new char[1]; data[0] = c; serial.Write(data, 0, 1); } public void sendBytes(byte[] data) { serial.Write(data, 0, data.Length); } public void clearBuffer() { if (serial.IsOpen) { serial.DiscardInBuffer(); serial.DiscardOutBuffer(); } } } }

    Read the article

  • Problem using ‘useLegacyV2RuntimeActivationPolicy’ & supportedRuntime in an application

    - by Notre
    Hello, I've modified a couple of different applications' .config file like this: <startup useLegacyV2RuntimeActivationPolicy="true"> <supportedRuntime version="v4.0"/> </startup> When I did this for devenv.exe.config (VS 2005 - don't ask :) ), things work great - most of the Visual Studio used .NET 2.0 but I was able to make use of an assembly targeting .NET 4.0 framework. I tried to do the same thing for a custom .exe, which happens to be based on MS CAB (slightly modified) and has a hybrid mix of WPF and WinForms content. As soon as I modified this application's app config file, I started getting this exception, sometime during application startup: The Undo operation encountered a context that is different from what was applied in the corresponding Set operation. The possible cause is that a context was Set on the thread and not reverted(undone). System.InvalidOperationException: The Undo operation encountered a context that is different from what was applied in the corresponding Set operation. The possible cause is that a context was Set on the thread and not reverted(undone). There's a big long stack trace that doesn't show anything in my application code directly (just a bunch of MS assemblies). If I modify the application's .config file to this: <startup useLegacyV2RuntimeActivationPolicy="true"> </startup> i.e.I remove the supportedRuntime element, then the application doesn't throw this exception. But when I go to the point in my code where I try to load my .NET 4 assembly, if fails with this: System.BadImageFormatException: Could not load file or assembly '' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded. I guess this is expected. I have two questions: 1) Any idea why I'm getting the System.InvalidOperationException exception when I modify this application's configuration file to include the supportedRuntime element, adding .NET 4 support and any suggestions on what I can do about it? 2) If the answer is "no idea why/don't know what you can do about it", then is possible for my .NET 3.5 SP1 code (C#) to provide more fine grain support for conditionally adding .NET 4 runtime support for a certain assembly(ies) without converting my entire application to target .NET 4, or without using the declarative config file approach? At some point I would convert the entire application to target .NET 4, but for the short term this is daunting task and I'm hope for some short term solution/hack. Thank you very much for any advice you can give!

    Read the article

  • Facebook Connect Statistics

    - by thekevinscott
    All, A client is asking for Facebook Connect statistical data. Specifically, how many people have shared a link to their wall. I have a Facebook app setup but I am having trouble interpreting the statistical data. Do Facebook apps collect this data, or can anyone think of any way of gleaning this data from the past month, from server logs or something? For instance, can I look at the logs for xd_receiver.htm and see usage patterns from that, or something?

    Read the article

  • Java Errors with jRuby on Rails on Google App Engine

    - by John Wang
    I followed all of the instructions so far from: http://code.google.com/p/appengine-jruby/wiki/RunningRails and http://gist.github.com/268192 Currently, I'm just trying to get to hello world. I'm getting these errors when I just run the dev_appserver.rb 238:hello-world jwang392$ dev_appserver.rb . => Booting DevAppServer => Press Ctrl-C to shutdown server => Generating configuration files 2010-04-08 09:16:51.961 java[411:1707] [Java CocoaComponent compatibility mode]: Enabled 2010-04-08 09:16:51.964 java[411:1707] [Java CocoaComponent compatibility mode]: Setting timeout for SWT to 0.100000 Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225387000] javax.servlet.ServletContext log: Warning: error application could not be initialized org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.newErrorApplication(DefaultRac kApplicationFactory.java: 118) at org.jruby.rack.DefaultRackApplicationFactory.init(DefaultRackApplicationFac tory.java: 37) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 26) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/Dhello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225913000] javax.servlet.ServletContext log: unable to create shared application instance org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.getApplication(DefaultRackAppl icationFactory.java: 51) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 27) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225915000] javax.servlet.ServletContext log: Error: application initialization failed org.jruby.rack.RackInitializationException: unable to create shared application instance at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 39) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.getApplication(DefaultRackAppl icationFactory.java: 51) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 27) ... 19 more Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) The server is running at http://localhost:8080/ I'm at a loss at what step I may have missed. I checked my ruby version (1.8.7) and rails version (2.3.5), gem version (1.3.6) and google-appengine-0.0.10.1 ran: sudo gem install google-appengine curl -O http://appengine-jruby.googlecode.com/hg/demos/rails2/rails2_appengine.rb ruby rails2_appengine.rb sudo gem install rails_dm_datastore sudo gem install activerecord-nulldb-adapter put this in my config.ru file: run lambda { |env| Rack::Response.new('Hello World!').finish } and finally ran $ dev_appserver.rb .

    Read the article

  • WebKit "Refused to set unsafe header "content-length"

    - by Paul
    I am trying to implement simple xhr abstraction, and am getting this warning when trying to set the headers for a POST. I think it might have something to do with setting the headers in a separate js file, because when i set them in the <script> tag in the .html file, it worked fine. The POST request is working fine, but I get this warning, and am curious why. I get this warning for both content-length and connection headers, but only in WebKit browsers (Chrome 5 beta and Safari 4). In Firefox, I don't get any warnings, the Content-Length header is set to the correct value, but the Connection is set to keep-alive instead of close, which makes me think that it is also ignoring my setRequestHeader calls and generating it's own. I have not tried this code in IE. Here is the markup & code: test.html: <!DOCTYPE html> <html> <head> <script src="jsfile.js"></script> <script> var request = new Xhr('POST', 'script.php', true, 'data=somedata', function(data) { console.log(data.text); }); </script> </head> <body> </body> </html> jsfile.js: function Xhr(method, url, async, data, callback) { var x; if(window.XMLHttpRequest) { x = new XMLHttpRequest(); x.open(method, url, async); x.onreadystatechange = function() { if(x.readyState === 4) { if(x.status === 200) { var data = { text: x.responseText, xml: x.responseXML }; callback.call(this, data); } } } if(method.toLowerCase() === "post") { x.setRequestHeader("Content-Type", "application/x-www-form-urlencoded"); x.setRequestHeader("Content-Length", data.length); x.setRequestHeader("Connection", "close"); } x.send(data); } else { // ... implement IE code here ... } return x; }

    Read the article

  • surfaceview + glsurfaceview + framelayout

    - by pohtzeyun
    Hi, I'm new at this (java and opengl) so please bear with me if the answer to the question is simple. :) I'm trying to get a camera preview screen with the ability to display 3d objects simultaneously. Having gone through the samples at the api demos, I thought combining the code for the the examples at the api demo would suffice. But somehow its not working. The forces me to shut down upon startup and the error is mentioned as null pointer exception. Could someone share with me where did I go wrong and how to proceed from there. How I did the combination for the code is as shown below: myoverview.xml <?xml version="1.0" encoding="utf-8"?> <FrameLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="fill_parent"> <android.opengl.GLSurfaceView android:id="@+id/cubes" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="fill_parent"/> <SurfaceView android:id="@+id/camera" android:layout_width="fill_parent" android:layout_height="fill_parent"/> </FrameLayout> myoverview.java import android.app.Activity; import android.os.Bundle; import android.view.SurfaceView; import android.view.Window; public class MyOverView extends Activity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // Hide the window title. requestWindowFeature(Window.FEATURE_NO_TITLE); // camera view as the background SurfaceView cameraView = (SurfaceView) findViewById(R.id.camera); cameraView = new CameraView(this); // visual of both cubes GLSurfaceView cubesView = (GLSurfaceView) findViewById(R.id.cubes); cubesView = new GLSurfaceView(this); cubesView.setRenderer(new CubeRenderer(false)); // set view setContentView(R.layout.myoverview); } } GLSurfaceView.java import android.content.Context; class GLSurfaceView extends android.opengl.GLSurfaceView { public GLSurfaceView(Context context) { super(context); } } NOTE : I didnt list the rest of the files as they are just copies of the api demos. The cameraView refers to the camerapreview.java example and the CubeRenderer refers to the CubeRenderer.java and Cube.java example. Any help would be appreciated as I've been stuck at this for a couple of days :p Thanks Sorry, didnt realise that the coding was out of place due to formatting mistakes. :p

    Read the article

  • Android: manifest targetSdkVersion change resulted in: icon not visible, widget no longer works, and

    - by Casey
    I recently upgraded my Android app to support multiple resolutions. Previously, my Android.manifest file had a line: To support multiple density and resolution devices, I changed this to: <supports-screens android:smallScreens="false" android:normalScreens="true" android:largeScreens="true" android:anyDensity="true" /> <uses-sdk android:minSdkVersion="3" android:targetSdkVersion="4" /> I then added a couple of new directories, like drawable-hdpi-v4 and drawable-long-hdpi-v4 that includes the high-res versions of the graphics. That's about it. Ever since releasing this update, there have been a decent number of users complaining about various problems: - the app icon doesn't appear (I did not create a high res version of the icon) - the home screen widget no longer works, even if they delete and re-add it (this code did not change with the update). I've had a user send me their error log, which shows: 03-19 20:59:41.617 W/ActivityManager( 1854): Unable to launch app com.alt12.babybump/10078 for broadcast Intent { action=android.appwidget.action.APPWIDGET_UPDATE flags=0x4 comp={com.alt12.babybump/com.alt12.babybump.WidgetGirl} (has extras) }: process is bad There is one questionable section in my existing widget code that may be relevant: @Override public void onReceive(Context context, Intent intent) { // v1.5 fix that doesn't call onDelete Action final String action = intent.getAction(); if (AppWidgetManager.ACTION_APPWIDGET_DELETED.equals(action)) { final int appWidgetId = intent.getExtras().getInt( AppWidgetManager.EXTRA_APPWIDGET_ID, AppWidgetManager.INVALID_APPWIDGET_ID); if (appWidgetId != AppWidgetManager.INVALID_APPWIDGET_ID) { this.onDeleted(context, new int[] { appWidgetId }); } } else { super.onReceive(context, intent); } } And perhaps most troublesome: the sqlite database is no longer accessible/writeable for some users so their data is no longer available. I did add the WRITE_EXTERNAL_STORAGE permission to the manifest. This is only happening to certain users and it tends to be HTC Eris users. In that error log I see things such as: 03-19 16:00:56.173 E/FlurryAgent( 4791): java.io.FileNotFoundException: /data/data/com.alt12.babybump/files/.flurryagent.-2333f5cb 03-19 16:00:56.173 E/FlurryAgent( 4791): at org.apache.harmony.luni.platform.OSFileSystem.open(OSFileSystem.java:231) 03-19 16:01:09.393 E/Database( 4791): sqlite3_open_v2("/data/data/com.alt12.babybump/databases/uitematmamad.db", &handle, 6, NULL) failed 03-19 16:01:09.393 W/System.err( 4791): android.database.sqlite.SQLiteException: unable to open database file It's as if the update has caused a new process and it can't access the old process's data, or something. Any help appreciated!

    Read the article

  • Opposite method of math power adding numbers

    - by adopilot
    I have method for converting array of Booleans to integer. It looks like this class Program { public static int GivMeInt(bool[] outputs) { int data = 0; for (int i = 0; i < 8; i++) { data += ((outputs[i] == true) ? Convert.ToInt32(Math.Pow(2, i)) : 0); } return data; } static void Main(string[] args) { bool[] outputs = new bool[8]; outputs[0] = false; outputs[1] = true; outputs[2] = false; outputs[3] = true; outputs[4] = false; outputs[5] = false; outputs[6] = false; outputs[7] = false; int data = GivMeInt(outputs); Console.WriteLine(data); Console.ReadKey(); } } Now I want to make opposite method returning array of Booleans values As I am short with knowledge of .NET and C# until now I have only my mind hardcoding of switch statement or if conditions for every possible int value. public static bool[] GiveMeBool(int data) { bool[] outputs = new bool[8]; if (data == 0) { outputs[0] = false; outputs[1] = false; outputs[2] = false; outputs[3] = false; outputs[4] = false; outputs[5] = false; outputs[6] = false; outputs[7] = false; } //After thousand lines of coed if (data == 255) { outputs[0] = true; outputs[1] = true; outputs[2] = true; outputs[3] = true; outputs[4] = true; outputs[5] = true; outputs[6] = true; outputs[7] = true; } return outputs; } I know that there must be easier way.

    Read the article

< Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >