Search Results

Search found 19625 results on 785 pages for 'local groups'.

Page 657/785 | < Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >

  • RAID degraded on Ubuntu server

    - by reano
    We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

    Read the article

  • Scenario - NTFS Symbolic Link or Junction?

    - by Unsigned
    Differences Absolute Relative File Directory UNC Symbolic link ? ? ? ? ? Junction ? x x ? x Scenario Let's assume we're creating a reparse point to create the redirect C:\SomeDir => D:\SomeDir Since this scenario only requires local, absolute paths, either a junction or symlink would work. In this situation, is there any advantage to using one or the other? Assume Windows 7 for the OS, disregarding backward-compatibility (prior to Vista, symlinks are not supported). Update I have found another difference. Symbolic Link - Link's permissions only affect delete/rename operations on the link itself, read/write access (to the target) is governed by the target's permissions Junction - Junction's permissions affect enumeration, revoking permissions on the junction will deny file listing through that junction, even if the target folder has more permissive ACLs The permissions make it interesting, as symlinks can allow legacy applications to access configuration files in UAC-restricted areas (such as %ProgramFiles%) without changing existing access permissions, by storing the files in a non-restricted location and creating symlinks in the restricted directory.

    Read the article

  • Application Pool Identity corruption

    - by Gavin Osborn
    I have observed a few times while deploying software into IIS that every now and again the related Application Pools fail to restart and in the Event Log we see an error like the following: The identity of application pool, 'AppPoolName' is invalid. If it remains invalid when the first request for the application pool is processed, the application pool will be disabled. This does not happen frequently but when it does the only solution is to re-apply the Identity password in the IIS Manager Window. As soon as I re-apply and then restart the application pool the web sites come back up. Facts: The account is a service account whose password never expires. The account is local to the IIS host. The account password is never changed. This is IIS 6 running on Windows Server 2003 Deployment of the software is via MSI and involves several IIS Resets. The software is created in house and does not do anything fancy to IIS. Any ideas how the identity information might become corrupt? Edit: Clarification To be clear - this user account and password combination work absolutely fine and usually works fine as the Identity of the Application Pool. It is only when we deploy updates of our software into an existing IIS application that it stops working. Our password has not changed Our deployment does not change the password or reconfigure the application pools. This does not happen every time, 1/20 times perhaps. If we re-enter the password into IIS and restart the App Pools everything works.

    Read the article

  • 3 simple questions about file permissions

    - by Camran
    1- Wonder, is this a good setup of permissions in the /var directory? drwxr-xr-x 2 root root 4096 2010-05-30 03:34 backups drwxr-xr-x 7 root root 4096 2010-05-29 17:55 cache drwxr-xr-x 29 root root 4096 2010-05-29 17:55 lib drwxrwsr-x 2 root staff 4096 2009-07-14 04:36 local drwxrwxrwt 3 root root 60 2010-06-02 03:34 lock drwxr-xr-x 9 root root 4096 2010-06-02 03:34 log drwxrwsr-x 2 root man 4096 2009-09-20 20:36 mail drwxr-xr-x 2 root root 4096 2009-09-20 20:36 opt drwxrwxrwt 12 root root 420 2010-06-02 12:12 run drwxr-xr-x 4 root root 4096 2009-09-20 20:37 spool drwxrwxrwt 2 root root 4096 2009-07-14 04:36 tmp drwxr-xr-x 14 user root 4096 2010-05-30 22:21 www 2- Could you give me a brief explanation of the columns above? First one is which permissions they have. Second is a nr. Third and fourth says "root root" for example. fifth is another nr (4096 for example). and the others are obvious. 3- Could you give me a brief explanation of the folders above? Especially the "lock" and "tmp" folders. Lock contains an apache2 folder which seems empty. Thanks

    Read the article

  • Trouble Letting Users Get to Certain Sites through Squid Proxy

    - by armani
    We have Squid running on a RHEL server. We want to block users from getting to Facebook, other than a couple specific sites, like our organization's page. Unfortunately, I can't get those specific pages unblocked without allowing ALL of Facebook through. [squid.conf] # Local users: acl local_c src 192.168.0.0/16 # HTTP & HTTPS: acl Safe_ports port 80 443 # File containing blocked sites, including Facebook: acl blocked dst_dom_regex "/etc/squid/blocked_content" # Whitelist: acl whitelist url_regex "/etc/squid/whitelist" # I do know that order matters: http_access allow local_c whitelist http_access allow local_c !blocked http_access deny all [blocked_content] .porn_site.com .porn_site_2.com [...] facebook.com [whitelist] facebook.com/pages/Our-Organization/2828242522 facebook.com/OurOrganization facebook.com/media/set/ facebook.com/photo.php www.facebook.com/OurOrganization My biggest weakness is regular expressions, so I'm not 100% sure about if this is all correct. If I remove the "!blocked" part of the http_access rule, all of Facebook works. If I remove "facebook.com" from the blocked_content file, all of Facebook works. Right now, visiting facebook.com/OurOrganization gives a "The website declined to show this webpage / HTTP 403" error in Internet Explorer, and "Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED): Unknown error" in Chrome. WhereGoes.com tells me the URL redirects for that URL goes like this: facebook.com/OurOrganization -- [301 Redirect] -- http://www.facebook.com/OurOrganization -- [302 Redirect] -- https://www.facebook.com/OurOrganization I tried turning up the debug traffic out of squid using "debug_options ALL,6" but I can't narrow anything down in /var/log/access.log and /var/log/cache.log. I know to issue "squid -k reconfigure" whenever I make changes to any files.

    Read the article

  • Apache and MySQL not working well after extending filesystem

    - by xtrimsky
    I had 4Gb on my /var (/dev/mapper/vg00-var) filesystem, and I wanted to extend it to 160Gb. I did it following this tutorial: http://faq.1and1.com/dedicated_servers/root_server/linux_admin_help/7.html Now I have 160: Filesystem Size Used Avail Use% Mounted on /dev/md1 4.0G 424M 3.6G 11% / /dev/mapper/vg00-usr 4.3G 1.4G 3.0G 32% /usr /dev/mapper/vg00-var 198G 6.5G 192G 4% /var /dev/mapper/vg00-home 4.3G 4.4M 4.3G 1% /home none 1.1G 0 1.1G 0% /tmp Now I have a problem, in order for Apache to work, each time I reboot, I need to also reboot apache: "apachectl -k restart" which is already terrible. I think this is because /var contains the htdocs The worst part is, mysql is not starting at all. Mysql has some files also in /var What have I done wrong ?? :( Thank you EDIT: Attaching /var/log/mysqld.log: 120602 11:17:44 InnoDB: Waiting for the background threads to start 120602 11:17:45 InnoDB: 1.1.8 started; log sequence number 8354009 120602 11:17:45 [ERROR] /usr/libexec/mysqld: unknown variable 'set-variable=local-infile=0' 120602 11:17:45 [ERROR] Aborting 120602 11:17:45 InnoDB: Starting shutdown... 120602 11:17:46 InnoDB: Shutdown completed; log sequence number 8354009 120602 11:17:46 [Note] /usr/libexec/mysqld: Shutdown complete 120602 11:17:46 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended

    Read the article

  • Change A Password

    - by Thomas
    I have a non-domain machine that I use with our company's domain resources over vpn regularly. I switched to Windows 8 (fresh install), and the "Change a password" option went away from the Ctrl-Alt-Del window. Can't seem to google anything about this subject, or find a way to access that password change dialog. I tried running the .reg file from http://www.sevenforums.com/tutorials/63014-ctrl-alt-del-screen-add-remove-change-password.html with no luck. I also tried to Disable "Remove Change Password" via gpedit.msc. I could do it from my domain laptop, but I like to do it on this machine because it updates all my saved copies of those credentials. My local account is tied to my hotmail account if that matters. Updates: Administrator account. I apologize for stating this was an upgrade, it was a fresh install to a diff't drive. 64-bit Pro install. Bounty's almost up If someone can just confirm that the Change A Password... should or should not be present on a non-domain, Live tied, Win8 install, I'll be satisfied that I can or cannot expect to fix it.

    Read the article

  • Smart card driven membership and door entry system

    - by Rob G
    I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

    Read the article

  • Photoshop CS5 performance over network drive (cifs)

    - by grub
    Hello Everyone I did install a QNAP NAS TS410 for a customer (professional photographer) with 3 Hitachi Deskstar 7200rpm 2TB disk configured as RAID5. The NAS and the workstations are connected over a Gigabit network. He and his co-worker are accessing the photos (about 1TB of photos) over a mapped network drive from their windows machines (Windows XP - 32bit and Windows 7 Ultimate - 32bit). Both are using Photoshop CS5 to edit the photos. The problem is that to save a edited photo takes a really long time, it takes about 3 times as long to save a photo as to open it. After some tests I can exclude the network, the NAS and the windows machines as source of the issue. I think the problem is the Photoshop software and its handling of the network drives. Officially network drives are not supported by Adobe. I do not have any experience with the Adobe products, especially with Adobe Photoshop CS5. What are your recommendation to solve the performance issue? Should my customer copy the photos to the local drive, edit them and upload them again to the network drive or is Adobe Drive or Adobe Version Cue the answer? One requirement is that the photos need to be accessible / editable from both computers even when one of them is offline. Adobe Version Cue needs a dedicated service running to be usable, so this solution is not possible as far as I understand the Cue software. Thank you for your input to this issue and have a nice day :-) Greetings grub

    Read the article

  • NVidia TwinView - slow rendering on dual desktop

    - by lisak
    Hey, does anybody have experience with it ? I've set it up 4 times on 4 different machines. And there was always problems with slow rendering ( for instance : scrolling pages in browser is not fluent). But there always was something that finally made it work perfectly... I remember that one time this option helped, but not now Option "RenderAccel" "1" Nvidia geforce 8400GS or Zotac geforce 9500GT Monitors connected via dvi and hdmi connectors proper nvidia driver installed Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "0" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/cyrillic" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "record" Load "dbe" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Acer AL1715" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Device" Identifier "Nvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "MSI big bang-fuzion" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "RenderAccel" "1" Option "AllowGLXWithComposite" "1" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1280x1024 +1920+0, DFP: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Windows 8 using as a webserver

    - by Jason
    I have a few hobby websites that I currently host on CentOS 6. Apache, mail serving, PHP, MySQL nothing special. In the past I used Windows XP to do this same task, for years, and I was OK. I switched to Linux and for the last few years it has been such a pain. updates break, certain apps only support certain distros without compiling from source. It prevents me from working on my hobby sites more because I am always fixing something. With Windows I locked it down, I run a hardware firewall and packet analyser, kept up on updates and A/V and never had a problem. I dont allow RDC from outside the local LAN, no FTP open, run OpenSSH on an obscure port.. I am considering switching to Windows 8 (since it is a cheaper license now that Windows 7) and running apache, HMailServer, PHP, MySQL, just like my CentOS install. My questions: I am not familiar with Windows 8, can the above be done like XP? No new security restrictions or the OS preventing this from happening? The machine is a Athlon 64-bit X2 with 32GB of RAM. Will Windows 8 see all of the RAM? Technically the machine came with Windows 7, and there is a serial number on it but I am sure I wiped away the Windows 7 recovery partition when I switched to Linux....

    Read the article

  • KVM virtual machine unable to access internet

    - by peachykeen
    I have KVM set up to run a virtual machine (Windows Home Server 2011 acting as a build agent) on a dedicated server (CentOS 6.3). Recently, I ran updates on the host, and the virtual machine is now unable to connect to the internet. The virtual network is running through NAT, the host has an interface (eth0:0) set up with a static IP (virt-manager shows the network and its IP correctly), and all connections to that IP should be sent to the guest. The host and guest can ping one another, but the guest cannot ping anything above the host, nor can I ping the guest from anywhere else (I can ping the host). Results from the guest to another server under my control and from an external system to the guest both return "Destination port unreachable". Running tcpdump on the host and destination shows the host replying to the ping, but the destination never sees it (it doesn't even look like the host is bothering to send it on at all, which leads me to suspect iptables). The ping output matches that, listing replies from 192.168.100.1. The guest can resolve DNS, however, which I find rather odd. The guest's network settings (connection TCP/IPv4 properties) are set up with a static local IP (192.168.100.128), mask of 255.255.255.0, and gateway and DNS at 192.168.100.1. When originally setting up the vm/net, I had set up some iptables rules to enable bridging, but after my hosting company complained about the bridge, I set up a new virtual net using NAT and believe I removed all the rules. The VM's network was working perfectly fine for the last few months, until yesterday. I haven't heard anything from the hosting company, didn't change anything on the guest, so as far as I know, nothing else has changed (unfortunately the list of packages updated has since fallen off scrollback and I didn't note it down).

    Read the article

  • can't get to admin page after factory reset netgear wg602

    - by stefanB
    I have wireless Netgear wg602 on my home network (connected to my internet modem/router). I've had it secured and locked down to only accept connection from specific MAC addresses. I've forgotten the password that I used but my Mac Book laptops can still connect (multiple OS updates - it can't retrieve and display the password but it can use it to log in to WPA) so I want to reconfigure it from scratch (have some new devices). I tried to reset the Netgear wg602 to factory settings (pressed reset button for 10 sec), reset my laptop IP address to local address suggested in manual (192.168.0.210 net mask 255.255.255.0), connect Netgear via ethernet cable to my mac book pro but I can't get to the admin page at 192.168.0.227 as suggested by manual (firefox or safari). At this stage the Netgear is not connected to router, it is only connected to mac book. I can't ping the wireless access point either (but it is on all lights are on). What am I doing incorrectly? Last time I configured it via Windows now I only have Mac Book (which I've used with the wireless access point for 2 years so no compatibility problems).

    Read the article

  • Access server using IP on another interface

    - by Markos
    I am using Windows Server 2012 instead of a router for my home network. Currently I am using RRAS and computers from local network can access Internet correctly. Here is a map of the current setup: [PC1] ---| |---- (lan ip)[Server](wan ip)--> internet [PC2] ---| I have applications running on Server, such as IIS and others. All can be accessed from internet using wan ip and from lan using lan ip. I have a domain, lets say its my-domain.com, which is resolved to my wan ip. What I want is to enable my LAN computers to be able to connect to services on my server using the very same address as internet users: eg http://my-domain.com/. However this does not work for my lan computers. What I understand is that I need to set up some kind of loopback route in a way that packets comming to LAN interface get routed to WAN interface. But I haven't found how to achieve this (in fact, I don't know WHAT to search for). Feel free to ask for additional informations and I will try to update the question.

    Read the article

  • My Mac OS X 10.5 netstat reveals a lot of open UDP connections.

    - by bboyreason
    here are my netstat results (besides server-less connections): Active Internet connections Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp4 0 0 192.168.1.98.49224 r1.ycpi.vip.sp2..http ESTABLISHED tcp4 0 0 192.168.1.98.49223 r1.ycpi.vip.sp2..http ESTABLISHED tcp4 0 0 192.168.1.98.49203 lax04s01-in-f189.https ESTABLISHED tcp4 0 0 192.168.1.98.49201 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49198 lax04s01-in-f19..http ESTABLISHED tcp4 0 0 192.168.1.98.49196 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49194 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49192 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49183 r1.ycpi.vip.sp2..http ESTABLISHED tcp4 0 37 192.168.1.98.49179 l1.login.vip.sp1.https CLOSING tcp4 0 0 192.168.1.98.49175 lax04s01-in-f104.https ESTABLISHED tcp4 0 37 192.168.1.98.49167 l1.login.vip.sp1.https LAST_ACK tcp4 0 0 192.168.1.98.49164 lax04s01-in-f19..https ESTABLISHED tcp4 0 0 192.168.1.98.49174 69.31.112.122.http TIME_WAIT tcp4 0 0 192.168.1.98.49173 69.31.113.83.http TIME_WAIT udp4 0 0 *.ipp **.* udp4 0 0 192.168.1.98.ntp **.* udp4 0 0 *.49628 **.* udp4 0 0 *.51997 **.* udp4 0 0 *.64675 **.* udp4 0 0 *.61947 **.* udp4 0 0 *.65152 **.* udp4 0 0 *.55643 **.* udp4 0 0 *.51704 **.* udp4 0 0 *.59757 **.* udp4 0 0 *.53643 **.* udp4 0 0 *.65346 **.* udp4 0 0 *.61960 **.* udp4 0 0 **.* **.* udp6 0 0 localhost.ntp **.* udp4 0 0 practivate.adobe.ntp **.* udp6 0 0 localhost.ntp **.* udp6 0 0 *.ntp **.* udp4 0 0 *.ntp **.* udp6 0 0 *.mdns **.* udp4 0 0 *.mdns **.** udp4 0 0 *.** **.** udp4 0 0 *.** **.** omitted a few asterisks, basically all the empty spots are asterisks what is up with all the UDP connections listening on any port? is that what this means? the internet activity that should be going in is that i connected via wpa to wifi at a small restaurant visited a few pages, checking mail from a few different accounts, no new mail or downloads where done. ?

    Read the article

  • nginx proxying different servers for different subdomains

    - by The.Anti.9
    i just set up an nginx server. On the same computer as nginx, I have apache running on port 8000 (this was previously set up.) and I want no subdomain and the www. subdomain to go to the local apache instance. But i want the stuff. subdomain to link to my server where i keep all my miscellaneous files (pictures, documents, etc.), which is also listening on port 80 at the ip 192.168.1.102. I tried configuring it, but when i go to my domain, I just get the "Welcome to nginx!". Here's what I have: user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; include /etc/nginx/conf.d/*.conf; server { listen 80; server_name theanti9.com www.theanti9.com; access_log /var/log/nginx/access.log; location / { proxy_pass http://localhost:8000; } } server { listen 80; server_name stuff.theanti9.com; access_log /var/log/nginx/access.log; location / { proxy_pass http://192.168.1.102:80; } } } I'm not really sure what's wrong. Any suggestions?

    Read the article

  • How can I get ffmpeg to convert a .mov to a .gif?

    - by user29336
    I'm trying to convert a .mov to a .gif and I'm not having success. Here's the error: ffmpeg -pix_fmt rgb24 -i yesbuddy.mov output.gif ffmpeg version 0.11.1 Copyright (c) 2000-2012 the FFmpeg developers built on Jun 12 2012 17:47:34 with clang 2.1 (tags/Apple/clang-163.7.1) configuration: --prefix=/usr/local/Cellar/ffmpeg/0.11.1 --enable-shared --enable-gpl --enable-version3 --enable-nonfree --enable-hardcoded-tables --enable-libfreetype --cc=/usr/bin/clang --enable-libx264 --enable-libfaac --enable-libmp3lame --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libxvid --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libass --enable-libvo-aacenc --disable-ffplay libavutil 51. 54.100 / 51. 54.100 libavcodec 54. 23.100 / 54. 23.100 libavformat 54. 6.100 / 54. 6.100 libavdevice 54. 0.100 / 54. 0.100 libavfilter 2. 77.100 / 2. 77.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 Option pixel_format not found. If I leave out the -pix_fmt rgb24 part it complains. Thoughts on how to fix?

    Read the article

  • How can I access user files on a disk moved from a Windows 7 machine to an XP machine?

    - by Fantius
    I moved the hard drive from one machine (Win 7) to another (XP) and now certain folders tell me "Access denied". I am logged in as an administrator. I had a different account on the other machine. Neither account authenticated to anything besides the local machine. The old machine is apparently dead, so I can't do anything in there like change permissions, etc. How can I access these files? Edit: After changing the ownerships of all the files and folders on the drive, I am getting a different error. And it is troubling me deeply. "xxx refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location." No change after rebooting. Any ideas? Surely the files are still there, right?

    Read the article

  • Clone Microsoft VM > SharePoint issues

    - by Rob
    Hi, We have an existing (production) Hyper-V VM that I want to clone to create a staging server. This server is NOT on a domain/active-directory - uses all local computer accounts. It is Windows 2008 OS, SharePoint 2007, SQL server 2008, Reporting Services, and some custom line-of-business web-applications. We rename the server etc as per the documentation we have, but are having troubles specifically with SharePoint. Some of the sites do not come up, and some issues adding/updating site settings such as site owners. Does anyone know of a definitive resource to this process? thanks Update: We seem to have most working, but the Shared Service Provider, and the SSP's admin site, are not working. In addition, the custom web-parts that reference IIS Session objects are failing (which seem to be related to the Share Service Provider). All the Windows user accounts for various services are renamed during the server cloning, but the windows account names in SQL server are not automatically changed. We've tried to change them in SQL server but still does not seem to work Seems like allot of work - and am thinking that there must be some guidance out there. also getting this: NullReferenceException: Object reference not set to an instance of an object.] Microsoft.Office.Server.Administration.SqlSessionStateResolver.System.Web. IPartitionResolver.ResolvePartition(Object key) +135

    Read the article

  • How can I keep SSH's know_hosts up to date (semi-securely)?

    - by Chas. Owens
    Just to get this out in front so I am not told not to do this: The machines in question are all on a local network with little to no internet access (they aren't even well connected to the corporate network) Everyone who has the ability to setup a man-in-the-middle attack already has root on the machine The machines are reinstalled as part of QA procedures, so having new host keys is important (we need to see how the other machines react); I am only trying to make my machine nicer to use. I do a lot of reinstalls on machines which changes their host keys. This necessitates going into ~/.ssh/known_hosts on my machine and blowing away to old key and adding the new key. This is a massive pain in the tuckus, so I have started considering ways to automate this. I don't want to just blindly accept any host key, so patching OpenSSH to ignore host keys is out. I have considered creating a wrapper around the ssh command the will detect the error coming back from ssh and present me with a prompt to delete the old key or quit. I have also considered creating a daemon that would fetch the latest host key from a machine on a whitelist (there are about twenty machines that are being constantly reinstalled) and replace the old host key in known_hosts. How would you automate this process?

    Read the article

  • Perfectly reproducable select statement default ordering issue....

    - by Dave
    Hi, I've recently been chasing an issue with a client's db... solution found, but impossible to recreate. Essentially, we're doing a Select * from mytable where ArbitraryColumn = 75 Where MyTable has an Identity column, called 'MyIndentityColumn' - incremented by one in each insert. Naturally, and normally I would assume that the order returned would be the order in which they are inserted (bad assumption, but one which was forced onto me, through an inherited application - which has been patched). Essentially, I would like suggestions as to why the database, when restored to my local machine (same OS, same SQL server version - 200 sp3) same collation, and same backup instance restored on it, as a test DB on the client site. When I perform the above select, I get them in order of insert (i.e. identity column ordered ascending). On the client, it seems random (but the same 'random' order each time)... A few other points: I have the same collation on my test server as client Same DB backup restored to a test only I can access Same SQL server version and service pack Same OS Test DB is a new DB - new log and MDF... I have the problem 'solved' by adding an explicit order by clause but I want to undertand the cause of the issue, given the exact nature of my attempts to recreate it beuing futile, and perfectly recreatable on the client server... Thanks in advance, Dave

    Read the article

  • W7-pro indexing mydoc on disk partition does not work

    - by Yvan Thery
    I am working on a HP-7100 mini tower running W7 Pro 64bits. My Local HD includes C:/ + 2 disk partitions : all my documents are located on disk partition L:/ and all my media files are on disk partition M:/ The indexing process works well on C:/ and M:/ but does not index the L:/ any more also all of them are allowed to be indexed, also the system is present on all drive security tabs. I have tested to rebuilt the indexing file with a new setting including few directories present on drive C/M/L but still with L: does not work ! One more thing I can tell you is that even after rebuilding the indexing file, I can find some residual directories or files which are out of the test selection. It is like unerased components remaining in the indexing database. As I do not know precisely how the indexing process works it is hard to know what to do ... Recently I had a bad time after using a past restoration procedure ... maybe it did corrupt the indexing file ???? If I start indexing the all L:/ disk partition the system stop at 39 found index also many more are existing .... Does any one from you guys could advise the process to create a new indexing database ... ? Any idea to get out of this mess ? Many thanks for assistance Yvan

    Read the article

  • Offloading backups to secondary network

    - by user1467163
    I'm trying to solve a problem- Currently, we are constantly backing up and have no budget for additional servers. Our production network is still a 10/100 and handles voip, SQL plus our backup traffic, and I'd like to offload the backup traffic onto a secondary network- all of our servers have secondary NIC's that are not in use, and all support gigabit (Our switching hardware does not- a topic for another day). I'd like to move my backups off the production network, but I am having a hard time getting the computers to communicate. I am using a Netgear GS724T switch for the backup network- Chosen for cost and because I have used them extensively on networks saturated with ghosting traffic, so I know it's up to the task. I have defined a VLAN, with ports that are not members of any other VLAN. All traffic is untagged on the VLAN. I have set the servers with 192.168.1.10 and 192.168.1.11 addresses, 255.255.255.0 netmask and I have tried a blank GW, using the local IP of the server 192.168.1.whatever address, and I have tried using the switch's production-side IP as the GW. The machines cannot find each other. DNS addresses are blank because I am going purely by IP for now... Any ideas how to get these machines to talk? they are Windows machines, running Server 2008R2 and 2003R2. Thanks!

    Read the article

  • Setting up /etc/network/interface file for KVM ubuntu 10.10

    - by Charles Thornton
    I am trying to setup KVM on Unbuntu 10.10 IFCONFIG DUMP: hydra(~}$ifconfig eth0 Link encap:Ethernet HWaddr 00:1b:fc:cb:77:eb inet addr:172.20.20.3 Bcast:172.20.20.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fecb:77eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1345 errors:0 dropped:0 overruns:0 frame:0 TX packets:1541 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:820414 (820.4 KB) TX bytes:317708 (317.7 KB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) virbr0 Link encap:Ethernet HWaddr 0a:1e:fb:b4:77:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 inet6 addr: fe80::81e:fbff:feb4:7784/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:8934 (8.9 KB) hydra(~}$ QUESTION:: How should /etc/network/interfaces be setup?? The following attempt just kills my internet connection! --------- /etc/network/interfaces ------------- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 172.20.20.3 netmask 255.255.255.0 network 172.20.20.0 broadcast 172.20.20.255 gateway 172.20.20.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off What am I doing wrong????

    Read the article

  • Debian Wheezy IPv6 isn't configured with ifup post-up hook

    - by aef
    We recently set up a server on Debian Wheezy Beta 3 (x86_64) which has a native IPv6 connection. We configured the eth0 interface to get the IPv6 configuration through some post-up hook commands in /etc/network/interfaces. The result is, that after the booting the system up, there is only IPv4 and an auto-configured link-local IPv6 address configured on the interface, as if the command has never been executed. When we additionally place the commands after the call to ifup -a inside the /etc/init.d/networking init script, everything works as expected and we have a fully configured interface after booting up. This is quite an ugly way to configure the interface. What are we doing wrong with the ifup post-up hooks? Or is this a bug? The section from /etc/network/interfaces looks like this (IP-addresses changed): allow-hotplug eth0 iface eth0 inet static address 1.2.3.1 netmask 255.255.255.192 network 1.2.3.0 broadcast 1.2.3.63 gateway 1.2.3.62 dns-nameservers 8.8.8.8 dns-search mydomain.tld post-up ip -6 addr add 2001:db8:100:3022::2 dev eth0 post-up ip -6 route add fe80::1 dev eth0 post-up ip -6 route add default via fe80::1 dev eth0 I also tried it in this alternative way: auto eth0 iface eth0 inet static address 1.2.3.1 netmask 255.255.255.192 network 1.2.3.0 broadcast 1.2.3.63 gateway 1.2.3.62 dns-nameservers 8.8.8.8 dns-search mydomain.tld iface eth0 inet6 static address 2001:db8:100:3022::2 netmask 64 gateway fe80::1 What we added to /etc/init.d/networking: … case "$1" in start) process_options check_ifstate if [ "$CONFIGURE_INTERFACES" = no ] then log_action_msg "Not configuring network interfaces, see /etc/default/networking" exit 0 fi set -f exclusions=$(process_exclusions) log_action_begin_msg "Configuring network interfaces" if ifup -a $exclusions $verbose && ifup_hotplug $exclusions $verbose # Our additions ip -6 addr add 2001:db8:100:3022::2 dev eth0 ip -6 route add fe80::1 dev eth0 ip -6 route add default via fe80::1 dev eth0 then log_action_end_msg $? else log_action_end_msg $? fi ;; …

    Read the article

< Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >