Search Results

Search found 22986 results on 920 pages for 'array difference'.

Page 660/920 | < Previous Page | 656 657 658 659 660 661 662 663 664 665 666 667  | Next Page >

  • frequent "SNMP error" with Cacti

    - by nn4l
    When adding new devices to my Cacti instance, I get frequent "SNMP error" messages in the device screen. But the error is not consistent, not even for the same device. Here's what I already have checked: Sometimes a device shows that "SNMP error" message even when it did not had that error an hour before, and vice versa. I tried this with several different Cacti releases, installed on different OS (Debian squeeze: 0.8.7g-1+squeeze1, Debian Sid: 0.8.7i-3, CentOS 6.0: 0.8.7i-2.el6) tried both from a local (192.168.1.xy) network and from a different data center so I don't think it is a network problem reinstalled the Cacti database, rerun the scripts to install my devices. Now different devices have that error when executing a snmpwalk or snmpgetnext command from the command line, it is always successful increasing the timeout to 20000 (20 seconds) and the retry count to 10 does not make a difference The cacti.log says: 04/14/2012 02:10:19 PM - CMDPHP: Poller[0] WARNING: SNMP GetNext Timeout for Host:'s0026.mydomain.de', and OID:'.1.3.6.1.2.1.1.3.0' 04/14/2012 02:10:20 PM - CMDPHP: Poller[0] WARNING: SNMP GetNext Timeout for Host:'s0026.mydomain.de', and OID:'.1.3' However, when executing snmpget or snmpget with that from the command line a proper response is returned immediately.

    Read the article

  • Remote Scripted Installation of Sun/Oracle JRE

    - by chrisbunney
    I'm attempting to automate the installation of a Debian server (debian 6.0 squeeze 64bit). Part of the installation requires the Sun JRE package to be installed. This package has a licence agreement, which has to be accepted. I have a script which uses the following lines to accept and install the JRE: echo "sun-java6-bin shared/accepted-sun-dlj-v1-1 boolean true" | debconf-set-selections apt-get install -y sun-java6-jre This works fine when executing the script locally. However, I need to execute the script remotely using the ssh command, e.g.: ssh -i keyFile root@hostname './myScript' This doesn't work. In particular, it fails on apt-get install -y sun-java6-jre. It would seem that in spite of me setting the licence agreement to accepted, when run remotely in this manner it is ignored. Despite setting the value to true, I still get prompted to manually accept the agreement when I run this command: ssh -i keyFile root@hostname 'apt-get install -y sun-java6-jre' I suspect it is something to do with environment that is taken care of when running a proper terminal session, but have no idea what to try next to fix it. So, what do I have to do to get this command (and hence my deployment script) to run correctly when executing it remotely? Or is there an alternative way that allows me to install the JRE remotely by another means? Edit 0: I have compared the output of env when executed remotely via ssh and when executed via a local terminal session. The only difference between the outputs is that the local terminal session has the additional value TERM=xterm.

    Read the article

  • Mediawiki extension error

    - by vinylguitar
    I'm running the latest version of mediawiki using MoWeS Portable II from my desktop. I just installed this extension on the wiki http://www.mediawiki.org/wiki/Extension:MsUpload It adds an option to upload files (to be embedded in an article) to the edit screen of an article. After installing it when I try and edit an article I get the following error: Fatal error: Call to undefined method OutputPage::addModules() in C:\Users\User\Desktop\knowledge mapedia 10 25 13 copy\mowes_portable\www\mediawiki\extensions\MsUpload\msupload.php on line 65 Also here is what I posted in the localsettings.php file (I put it in at the end of localsettings.php if it makes a difference): Start --------------------------------------- MsUpload $wgMSU_ShowAutoKat = false; #autocategorisation $wgMSU_CheckedAutoKat = false; #checkbox for autocategorisation checked $wgMSU_debug = false; #debug mode $wgMSU_ImgParams = '400px'; #default max-size for inserted image $wgMSU_UseDragDrop = true; #show drag&drop area require_once "$IP/extensions/MsUpload/msupload.php"; End --------------------------------------- MsUpload require_once "$IP/extensions/msupload/msupload.php"; At line 65 in the localsettings.php file there is the following: line 64 ## Database settings line 65 $wgDBtype = "mysql"; line 66 $wgDBserver = "localhost"; line 67 $wgDBname = "mediawiki"; line 68 $wgDBuser = "root"; line 69 $wgDBpassword = ""; Any idea what I'm doing wrong?

    Read the article

  • ZFS - zpool ARC cache plus L2ARC benchmarking

    - by jemmille
    I have been doing lots of I/O testing on a ZFS system I will eventually use to serve virtual machines. I thought I would try adding SSD's for use as cache to see how much faster I can get the read speed. I also have 24GB of RAM in the machine that acts as ARC. vol0 is 6.4TB and the cache disks are 60GB SSD's. The zvol is as follows: pool: vol0 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM vol0 ONLINE 0 0 0 c1t8d0 ONLINE 0 0 0 cache c3t5001517958D80533d0 ONLINE 0 0 0 c3t5001517959092566d0 ONLINE 0 0 0 The issue is I'm not seeing any difference with the SSD's installed. I've tried bonnie++ benchmarks and some simple dd commands to write a file then read the file. I have run benchmarks before and after adding the SSD's. I've ensured the file sizes are at least double my RAM so there is no way it can all get cached locally. Am I missing something here? When am I going to see benefits of having all that cache? Am I simply not under these circumstances? Are the benchmark programs not good for testing the effect of cache because of the the way (and what) it writes and reads?

    Read the article

  • Windows 7 install detects SSD but doesn't list it to install to

    - by Mohamed Meligy
    I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

    Read the article

  • Hudson plugin problem

    - by user27644
    Hi. I've created almost the same plugin as JobTypeColumn. There is only one difference - it shows job description instead of job type. But after i can't add this column to my list view. I have an NullPointerException after i edited my config.xml manually. java.lang.NullPointerException at hudson.model.Descriptor.newInstancesFromHeteroList(Descriptor.java:626) at hudson.util.DescribableList.rebuildHetero(DescribableList.java:164) at hudson.model.ListView.submit(ListView.java:262) at hudson.model.View.doConfigSubmit(View.java:484) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.kohsuke.stapler.Function$InstanceFunction.invoke(Function.java:185) at org.kohsuke.stapler.Function.bindAndInvoke(Function.java:101) at org.kohsuke.stapler.Function.bindAndInvokeAndServeResponse(Function.java:54) at org.kohsuke.stapler.MetaClass$1.doDispatch(MetaClass.java:74) at org.kohsuke.stapler.NameBasedDispatcher.dispatch(NameBasedDispatcher.java:30) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:492) at org.kohsuke.stapler.MetaClass$6.doDispatch(MetaClass.java:180) at org.kohsuke.stapler.NameBasedDispatcher.dispatch(NameBasedDispatcher.java:30) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:492) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:408) at org.kohsuke.stapler.Stapler.service(Stapler.java:117) at javax.servlet.http.HttpServlet.service(HttpServlet.java:45) at winstone.ServletConfiguration.execute(ServletConfiguration.java:249) at winstone.RequestDispatcher.forward(RequestDispatcher.java:335) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:378) at hudson.util.PluginServletFilter$1.doFilter(PluginServletFilter.java:94) at net.bull.javamelody.MonitoringFilter.doFilter(MonitoringFilter.java:304) at org.jvnet.hudson.plugins.monitoring.HudsonMonitoringFilter.doFilter(HudsonMonitoringFilter.java:31) at hudson.util.PluginServletFilter$1.doFilter(PluginServletFilter.java:97) at hudson.util.PluginServletFilter.doFilter(PluginServletFilter.java:86) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at hudson.security.csrf.CrumbFilter.doFilter(CrumbFilter.java:47) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at hudson.security.ChainedServletFilter$1.doFilter(ChainedServletFilter.java:84) at hudson.security.ChainedServletFilter.doFilter(ChainedServletFilter.java:76) at hudson.security.HudsonFilter.doFilter(HudsonFilter.java:164) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at winstone.RequestDispatcher.forward(RequestDispatcher.java:333) at winstone.RequestHandlerThread.processRequest(RequestHandlerThread.java:244) at winstone.RequestHandlerThread.run(RequestHandlerThread.java:150) at java.lang.Thread.run(Unknown Source)

    Read the article

  • Scheduled tasks fail to start unless I'm logged in to the server

    - by Chuck
    Tasks need to open a CMD window and pass net use commands, then do a DIR command, pipping the output to a file on the server. Log in as either me (Sysadmin) or with one of the system accounts and task will only run if I'm physically logged into the server. Run as batch file is set in security properties for both users (me and service account), security is granted to all directories, etc. It almost acts like a scheduled task, since it is not physically connected to a display can't create a CMD window and pass the WinID so the command can be sent. I'm guessing. Anyone know of a document that explains how the server handles initiation of a window if done via scheduled task and no attached user is associated with the task? If I log onto the box and run the scheduled tasks they run fine, but produce no errors or event log entries and then just show that it ran successfully and sets the next run time. Have tried both with the run if logged in checkbox on and off and makes no difference. Other tasks work fine, except that they are acting on local drives with no display writing or updating taking place, so I'm guessing the system either can't instantiate a window if no display is connected to a logged on user, or it can't establish a point if it is trying to create a virtual screen. You'd think it is just creating a memory map and then mapping it to a device to display, but that doesn't seem to be the case, but I can find no documentation on how the system handles a scheduled task and how to invoke a fake or virtual screen that it could write to so it appears that a user was connected. Thanks This is driving me nuts and I've tried everything I can think of as well as our network boys ideas and nothing seems to work.

    Read the article

  • Windows 2008 RemoteAPP client disconnects within a matter of minutes

    - by Jeroen Wilke
    I'm having an odd problem with Windows 2008 TS, and remote applications specifically. The situation is as follows: TS idle timeout is disabled via GPO TS terminating disconnected sessions after 1hr (via GPO) My users can log on to the Terminal server, and get a full desktop, OR via rdp files that give access to a few remote applications. When a user connects to a full desktop, everything is fine and dandy, they will remain logged on indefinately, and when they disconnect the session is terminated after an hour. however, when a user connects using a remote application link, the client seems to disconnect after only a few minutes of inactivity, when you click the window, the session reconnects. EventID's on TS server: 4779: This event is generated when a user disconnects from an existing Terminal Services session, or when a user switches away from an existing destop using Fast User Switching. 4778 : This event is generated when a user reconnects to an existing Terminal Services session, or when a user switches to an existing desktop using Fast User Switching users are connecting directly to 3389, not using a TS-gateway at the moment. This behavior is consistent on different clients that we have, Full desktop is fine, RemoteAPP constantly disconnects. The .rdp file used doesn't list any interesting parameters, aside from what application to launch, and where to find it. Can someone explain to me how there can be a difference in behaviour between full desktop, and remoteapp ? since essentially they use the exact same client ? Regards Jeroen

    Read the article

  • SpamAssassin 2010 Bug still active on my mailserver despite the offending rule being fixed - where t

    - by Ibrahim
    The SpamAssassin 2010 bug was supposed to be fixed not long after the bug became widely known, and indeed the offending rule in my /usr/share/spamassassin/72_active.cf has been updated. However, incoming messages are still being tagged by this eg: X-Spam-Status: No, score=3.188 tagged_above=-999 required=6.31 tests=[BAYES_50=0.001, FH_DATE_PAST_20XX=3.188, SPF_PASS=-0.001] Here is the relevant rule: ##{ FH_DATE_PAST_20XX header FH_DATE_PAST_20XX Date =~ /20[2-9][0-9]/ [if-unset: 2006] describe FH_DATE_PAST_20XX The date is grossly in the future. ##} FH_DATE_PAST_20XX I'm on spamassassin/3.2.5-2+lenny1.1~volatile1 on Debian Lenny, completely up to date. Any pointers on where to look to figure out what's going on? I don't know anything about SpamAssassin; someone else usually manages this but I'm free right now and am trying to figure out what the problem is because it's been annoying us for a while and we only just realized this bug was still affecting us. Update: I've lowered the score for the FH_DATE_PAST20XX rule to 0.1, both in /etc/spamassassin/local.cf and /usr/share/spamassassin/50_scores.cf and it's still giving 3.188 points for this rule. Any idea what's going on? This really has me stumped. Update 2: It seems that after restarting amavisd, it's been fixed. What's the difference between amavisd and spamd? It seems like both should not be running, or something.

    Read the article

  • SpamAssassin 2010 Bug still active on my mailserver despite the offending rule being fixed - where t

    - by Ibrahim
    The SpamAssassin 2010 bug was supposed to be fixed not long after the bug became widely known, and indeed the offending rule in my /usr/share/spamassassin/72_active.cf has been updated. However, incoming messages are still being tagged by this eg: X-Spam-Status: No, score=3.188 tagged_above=-999 required=6.31 tests=[BAYES_50=0.001, FH_DATE_PAST_20XX=3.188, SPF_PASS=-0.001] Here is the relevant rule: ##{ FH_DATE_PAST_20XX header FH_DATE_PAST_20XX Date =~ /20[2-9][0-9]/ [if-unset: 2006] describe FH_DATE_PAST_20XX The date is grossly in the future. ##} FH_DATE_PAST_20XX I'm on spamassassin/3.2.5-2+lenny1.1~volatile1 on Debian Lenny, completely up to date. Any pointers on where to look to figure out what's going on? I don't know anything about SpamAssassin; someone else usually manages this but I'm free right now and am trying to figure out what the problem is because it's been annoying us for a while and we only just realized this bug was still affecting us. Update: I've lowered the score for the FH_DATE_PAST20XX rule to 0.1, both in /etc/spamassassin/local.cf and /usr/share/spamassassin/50_scores.cf and it's still giving 3.188 points for this rule. Any idea what's going on? This really has me stumped. Update 2: It seems that after restarting amavisd, it's been fixed. What's the difference between amavisd and spamd? It seems like both should not be running, or something.

    Read the article

  • How do I grant a database role execute permissions on a schema? What am I doing wrong?

    - by Lewray
    I am using SQL Server 2008 Express edition. I have created a Login , User, Role and Schema. I have mapped the user to the login, and assigned the role to the user. The schema contains a number of tables and stored procedures. I would like the Role to have execute permissions on the entire schema. I have tried granting execute permission through management studio and through entering the command in a query window. GRANT EXEC ON SCHEMA::schema_name TO role_name But When I connect to the database using SQL management studio (as the login I have created) firstly I cannot see the stored procedures, but more importantly I get a permission denied error when attempting to run them. The stored procedure in question does nothing except select data from a table within the same schema. I have tried creating the stored procedure with and without the line: WITH EXECUTE AS OWNER This doesn't make any difference. I suspect that I have made an error when creating my schema, or there is an ownership issue somewhere, but I am really struggling to get something working. The only way I have successfully managed to execute the stored procedures is by granting control permissions to the role as well as execute, but I don't believe this is the correct, secure way to proceed. Any suggestions/comments would be really appreciated. Thanks.

    Read the article

  • NRPE unable to read output, but why?

    - by ticktockhouse
    I have this problem with NRPE, all the stuff I've found so far on the net seems to point me at things I've already tried. # /usr/local/nagios/plugins/check_nrpe -H nrpeclient gives NRPE v2.12 as expected. Running the command by hand (as defined in nrpe.cfg on "nrpeclient", gives the expected response nrpe.cfg: command[check_openmanage]=/usr/lib/nagios/plugins/additional/check_openmanage -s -e -b ctrl_driver=0 bat_charge "Expected response" But if I try to run the command from the Nagios server I get the following: # /usr/local/nagios/plugins/check_nrpe -H comxps -c check_openmanage NRPE: Unable to read output Can anyone think of anywhere else I might have made a mistake with this? I've done the same thing on multiple other servers with no problem. The only difference I can think of with this is that this box is RHEL 5 based, whereas the others are RHEL 4 based. Those two bits above that I've tested are the what most people seem to suggest when people have had this problem. I should mention that I get a weird error in the logs when I restart nrpe: nrpe[14534]: Unable to open config file '/usr/local/nagios/etc/nrpe.cfg' for reading nrpe[14534]: Continuing with errors... nrpe[14535]: Starting up daemon nrpe[14535]: Warning: Daemon is configured to accept command arguments from clients! nrpe[14535]: Listening for connections on port 5666 nrpe[14535]: Allowing connections from: bodbck,combck,nam-bck Even though, it's plainly reading that /usr/local/nagios/etc/nrpe.cfg file to get the stuff it's talking about further down..

    Read the article

  • Wifi network undetectable on a Lenovo G470

    - by Rex
    I have a WPA2 secured network with a visible SSID at home that works perfectly fine with a Dell laptop,a HP netbook and sundry mobile phones. When I try connecting my sister's Lenovo G470, it refuses to detect the wifi network no matter what, but shows up the neighbors' networks. The Lenovo also works correctly at her office. Both laptops run Windows 7. Already tried/checked the following: Manually configure wifi network settings (copied over from the Dell) Ensure there is no MAC address filtering on the router. Ensure router DHCP server is not running out of addresses to assign (I have set it to allocate upto 10). Reboot laptop, router etc. Is this a known problem, and is there anything else one could try? Update - The problematic Lenovo uses Windows 7 Home Basic while the Dell that works uses Home Premium and the HP netbook uses Starter edition - if that makes any difference. Further update - It is able to connect if I reboot into safe mode with networking. However in 'normal' mode it shows up the network sporadically, and then says there was an error connecting to it. All the network parameters, password, encryption, etc etc are EXACTLY the same as they are on the Dell.

    Read the article

  • Help building maya render node spec

    - by Ak
    Hi there, I'm looking to build 4x Maya render slaves/nodes for a friend of mine when his project gets green lit. The project involves MentalRay and lots of glass. I'm unsure if the new i7's 9xx or 8xx with hyper threading will do any better than a core 2 quad of the same (or close enough) speed. Does hyper threading make a difference to Maya or is it more performance per core based? I'm sure he's prefer I'd build another render node than pay for a bleeding edge CPU that only adds fractionly more GHz. -- The rest of the spec so far: 4Gb - 8Gb ram 64 bit OS: Probably Windows 7 (I know Linux is free, but want to build something my friend can support himself as easily as he supports his own workstation) 1TB HDD to hold textures, Maya files and renders which will be copied to central storage later Mobo with on-board video, gigabit NIC 500 - 650 watt PSU Desktop case something like a: Cooler Master ATCS 840 The machines will sold afterwards if necessary. -- If anyone has had experience in Maya and has done any tests with the new CPUs vs. the older ones I'd really appreciate your input.

    Read the article

  • Network connection to Firebird 2.1 became slow after upgrading to Ubuntu 10.04

    - by lyle
    We've got a setup that we're using for different clients : a program connecting to a Firebird server on a local network. So far we mostly used 32bit processors running Ubuntu LTS (recently upgraded to 10.04). Now we introduced servers running on 64bit processors, running Ubuntu 10.04 64bit. Suddenly some queries run slower than they used to. In short: running the query locally works fine on both 64bit and 32bit servers, but when running the same queries over the network the 64bit server is suddenly much slower. We did a few checks with both local and remote connections to both 64bit and 32bit servers, using identical databases and identical queries, running in Flamerobin. Running the query locally takes a negligible amount of time: 0.008s on the 64bit server, 0.014s on the 32bit servers. So the servers themselves are running fine. Running the queries over the network, the 64bit server suddenly needs up to 0.160s to respond, while the 32bit server responds in 0.055s. So the older servers are twice as fast over the network, in spite of the newer servers being twice as fast if run locally. Apart from that the setup is identical. All servers are running the same installation of Ubuntu 10.04, same version of Firebird and so on, the only difference is that some are 64 and some 32bit. Any idea?? I tried to google it, but I couldn't find any complains that Firebird 64bit is slower than Firebird 32bit, except that the Firebird 2.1 change log mentions that there's a new network API which is twice as fast, as soon as the drivers are updated to use it. So I could imagine that the 64bit driver is still using the old API, but that's a bit of a stretch, I guess. Thanx in advance for any replies! :)

    Read the article

  • Can’t connect to SQL Server 2008 - looks like Shared Memory problem

    - by user38556
    I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

    Read the article

  • Weird mouse/keyboard freezups when using PowerPoint 2007 with IBM/Lenovo docking station

    - by DanM
    I'm not sure what part of my system is responsible for this, but when using PowerPoint, I have problems when trying to resize drawing objects. I'll be dragging the handle and suddenly, the object will deselect and whatever is behind the object will select and start moving around. Next thing I know, the keyboard won't type anymore, and the only way to fix it is to unplug the USB and plug it back in. In case it's hardware related, I'm using an IMB Thinkpad T60P in a docking station. My keyboard is a Microsoft Natural Keyboard Pro. My OS is Windows XP SP3. I've never noticed this happening in anything besides PowerPoint, and I don't know anyone else who has this problem (even people with similar setups). Any ideas what it could be? Edit Well, it looks like I only get the problem if I plug the mouse into my docking station's USB. If I plug directly into the laptop's USB, everything works fine. And, again, this problem is only with PowerPoint. I tried playing with some drawing objects in Word and had no issue no matter where my mouse was plugged in. I should also mention I tried a different mouse (a standard Microsoft corded mouse instead of my Logitech trackball), but that made no difference. So, I don't think it's anything specific with the trackball or the trackball's driver. I tried searching Google but came up empty, so I'm guessing this problem is something unique to my setup. If you have any thoughts or ideas to try, I'd love to hear them.

    Read the article

  • saslauthd authentication error

    - by James
    My server has developed an expected problem where I am unable to connect from a mail client. I've looked at the server logs and the only thing that looks to identify a problem are events like the following: Nov 23 18:32:43 hig3 dovecot: imap-login: Login: user=, method=PLAIN, rip=xxxxxxxx, lip=xxxxxxx, TLS Nov 23 18:32:55 hig3 postfix/smtpd[11653]: connect from xxxxxxx.co.uk[xxxxxxx] Nov 23 18:32:55 hig3 postfix/smtpd[11653]: warning: SASL authentication failure: cannot connect to saslauthd server: No such file or directory Nov 23 18:32:55 hig3 postfix/smtpd[11653]: warning: xxxxxxx.co.uk[xxxxxxxx]: SASL LOGIN authentication failed: generic failure Nov 23 18:32:56 hig3 postfix/smtpd[11653]: lost connection after AUTH from xxxxxxx.co.uk[xxxxxxx] Nov 23 18:32:56 hig3 postfix/smtpd[11653]: disconnect from xxxxxxx.co.uk[xxxxxxx] The problem is unusual, because just half an hour previously at my office, I was not being prompted for a correct username and password in my mail client. I haven't made any changes to the server, so I can't understand what would have happened to make this error occur. Searches for the error messages yield various results, with 'fixes' that I'm uncertain of (obviously don't want to make it worse or fix something that isn't broken). When I run testsaslauthd -u xxxxx -p xxxxxx I also get the following result: connect() : No such file or directory But when I run testsaslauthd -u xxxxx -p xxxxxx -f /var/spool/postfix/var/run/saslauthd/mux -s smtp I get: 0: OK "Success." I found those commands on another forum and am not entirely sure what they mean, but I'm hoping they might give an indication of where the problem might lie. If it makes any difference, I'm running Ubuntu 10.04.1, Postfix 2.7.0 and Webmin/ Virtualmin.

    Read the article

  • Lenovo Wi-Fi Replacement

    - by user22910
    I recently got my T500 with a very poor signal Wi-Fi, Thinkpad BGN, a Realtek chipset. I would like to replace my Wi-Fi card with either the Intel WiFi Link 5100 or 5300. However, I read somewhere that Lenovo specfically "whitelist" their Wi-Fi cards to only work with their laptops. I could not find any of the Intel Wi-Fi, moreover any Wi-Fi cards on the Lenovo site. So, I went to hunt around in Amazon and found several sellers. Plus what sort of card do I require? There is a difference between mini cards and the full sized card, though I do not know which one my laptop supports. Here are the specifications for my laptop: http://privatepaste.com/8b0537bce0 I would like to have confirmation which one of these specific cards as posted below will work on my laptop (or the one you recommend to have): Intel Wifi Link 5300 Intel WiFi Link 5100 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft 2.0) Intel WiFi Link 5100 - Network adapter - PCI Express Half Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft) Intel WiFi Link 5300 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft)

    Read the article

  • PHP/Linux File Permissions

    - by user1733435
    May I ask a question about file permission. I set up Ubuntu server where Apache got running. I have simple php upload form and able to upload file to /var/www/site/uploads as follows. sandbox@sandbox-virtual-machine:/var/www/site/uploads$ ll total 1736 drwxrwxrwx 2 www-data www-data 4096 Oct 18 02:53 ./ drwxrwxrwx 3 sandbox sandbox 4096 Oct 18 00:42 ../ -rw-r--r-- 1 www-data www-data 145998 Oct 18 02:53 3d wallpaper pic.jpg -rw-r--r-- 1 www-data www-data 166947 Oct 18 02:53 3D Wallpapers 9.jpg -rw-r--r-- 1 www-data www-data 1451489 Oct 18 02:53 6453_3d_landscape_hd_wallpapers_green.jpg Is there anyway to upload files and they show up as -rw-r--r-- 1 sandbox sandbox 145998 Oct 18 02:53 3d wallpaper pic.jpg -rw-r--r-- 1 sandbox sandbox 166947 Oct 18 02:53 3D Wallpapers 9.jpg -rw-r--r-- 1 sandbox sandbox 1451489 Oct 18 02:53 6453_3d_landscape_hd_wallpapers_green.jpg so that I could straight away feed them to waiting/running shell script. Right now waiting script(move,checksums,rename,resize,etc) unable to do anything to uploaded files with attributes of www-data. If I just do as local account, such as sandbox@sandbox-virtual-machine:/var/www/site/uploads$touch testfile then the script is able to run as I would like to. Any suggestion would be grateful,thanks in advance as well. Thanks for everyone giving help to me,that I was able to progress. Now I am close to getting solved and append the output sandbox@sandbox-virtual-machine:/var/www/site/uploads$ ll total 388 drwxrwxrwx 2 www-data www-data 4096 Oct 18 04:22 ./ drwxrwxrwx 3 sandbox sandbox 4096 Oct 18 04:17 ../ -rw-r--r-- 1 sandbox sandbox 166947 Oct 18 04:21 3D Wallpapers 9.jpg -rw-r--r-- 1 sandbox sandbox 219808 Oct 18 04:20 adafruit_pi.png -rw-rw-r-- 1 sandbox sandbox 0 Oct 18 04:22 test How may I set permission to uploaded files like 'test' only w difference in middle group. Such as adafruit_pi.png Vs test. Which statement shall I insert to php code,please?

    Read the article

  • What are the advantages and disadvantages of the various virtual machine image formats?

    - by Matt
    Xen and Virtualbox etc both support a range of different virtual machine image formats. These are: vmdk, vdi, qcow & qcow2, hdd & vhd. Without any bias toward a particular product, I'm wanting to know what are the advantages and disadvantages of the various formats both from a features perspective, robustness and speed? One piece of info I discovered in a forum post was this: "The major difference is that VDI uses relatively large blocks (1MB) when growing an image, and thus has less overhead for block pointers etc. but isn't ultimately space efficient in the sense that if a single byte is non-zero in such a 1MB block the entire space is used. VMDK in contrast uses 64K blocks, and thus has more management overhead and generally a bit less disk space consumption What offsets this is that VDI is more efficient when it comes to snapshots." You might be thinking, I want to know this because I want to know which format to choose? Not exactly, I'm developing some software which utilises these formats and want to support one or more of them. Simplicity, large disks and ease of development are my main drivers.

    Read the article

  • Postfix character encoding?

    - by Anonymous12345
    I use Postfix as a mailserver. I have Ubuntu OS. Then I use PHP to send emails. Problem is that none of my emails are encoded properly by a mailsoftware which my VPS provider uses. According to them, the problem lies with me. It is only the name field which isn't encoded properly. For example "Björn" becomes "Björn" in my emails. However, when I echo the $name, it outputs "Björn" which is correct. Also, gmail and hotmail does show it correctly. The strange part is that the "text" (the message itself) is encoded properly. I use the following for sending mail: $headers="MIME-Version: 1.0"."\n"; $headers.="Content-type: text/plain; charset=UTF-8"."\n"; $headers.="From: $name <$email>"."\n"; $name= iconv(mb_detect_encoding($name), "UTF-8//IGNORE//TRANSLIT", $name); //// I HAVE TRIED WITH AND WITHOUT THE LINE ABOVE, NO DIFFERENCE mail($to, '=?UTF-8?B?'.base64_encode($subject).'?=', $text, $headers, '[email protected]'); I have tried with and without the iconv line also, no luck. The last thing I can think of is POSTFIX, could there be a setting for character encoding there? Anybody knows?

    Read the article

  • Writing a script for ash?

    - by rumtscho
    My VPN is behaving funny sometimes, and I have to restart it often. I wanted to write a script which does that for me. It doesn't have to be anything fancy, just a shortcut for the commands I have to type into the terminal. More specifically: it will look at the running processes. If it finds a running vpnc process, it will kill it. Then it will start vpnc. I've written bash scripts of similar complexity, but now I don't have a bash, only an ash. Until now, the only difference I noticed is that there are much less commands available, but then, I don't use it very often. So I have some questions. Is writing ash scripts different than writing bash scripts? Is there something specific to consider when doing it? When the script is ready, how can I deploy it? For bash, I just put the executable file under /usr/lib and run it by typing the file name into the command line, will this work with ash? Are there any special pitfalls to watch out for in the script I want to write? I think that the killing process part may get hairy, if I write something that kills the wrong process, but even then running the script shouldn't break anything permanently, right?

    Read the article

  • How can I set up a 404 error page when people access http://ftp.mydomain.com?

    - by Tim B.
    I am a freelance videographer/developer, and part of my job involves transferring large files over FTP to production houses/television stations. While the majority of people in my industry understand the difference between FTP and HTTP, I've experienced several interactions in the past couple months of people who still open Internet Explorer and try to access http://ftp.mydomain.com, receive an error page served by HostGator, and tell me that they cannot access my FTP server. Instead of spending time delivering instructions via e-mail, I'd much prefer to serve up a custom error page in this instance that instructs them how to download and use an FTP client. I tried setting up a sub-domain in Cpanel hoping I could simply drop in an .htaccess file with the error page, but I got this error: ftp.mydomain.com domainadmin-domainexistsglobal I also tried creating a custom error page in PHP which reads the site URL and serves up the custom content only when http://ftp.mydomain.com is accessed. Unfortunately, the error page works for every subdomain except that one. I'm not entirely sure this is even technically possible, which is why I bring it to the good people of StackOverflow to help. Thanks!

    Read the article

  • nginx starts up before apache

    - by paullb
    I've been fumbling through setting up redmine on a unbuntu (12.04) box and somewhere along the line NginX got set up and now apache no longer loads because nginx has already grabbed the port. I tried removing NginX with the below command but that didn't seem to make any difference. When I restarted the server and pointed my web browser I still got the "Welcome to NginX" message sudo apt-get purge nginx I have confirmed that NginX is gone because when I run the above now I get as an output Package nginx is not installed, so not removed Yet everytime I start the machine it is running again. I noticed the following for the running processes (if that is helpful) root 923 0.0 0.0 76784 1280 ? Ss 03:00 0:00 nginx: master process /usr/sbin/nginx www-data 925 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 926 0.0 0.1 77092 2204 ? S 03:00 0:00 nginx: worker process www-data 927 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 928 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process Any advice for bringing back apache2 as the "default" (for lack of a better term) web server?

    Read the article

< Previous Page | 656 657 658 659 660 661 662 663 664 665 666 667  | Next Page >