Search Results

Search found 22308 results on 893 pages for 'floating point'.

Page 664/893 | < Previous Page | 660 661 662 663 664 665 666 667 668 669 670 671  | Next Page >

• Moving an external hard drive while running

  - by user1108939

  I mean physically moving the drive around. I've never dealt with external hard drives before. Just plugged this wd mypassport to test the transfer rate. At one point I 'safely ejected' the drive. A minute later I decide to check the underside of the drive, not realizing the disk is still spinning. I lift the drive, rotating my writs about 70 degrees to the left... I hear a sequence of three high pitched sounds. I couldn't determine whether that was an indication beep by an internal security feature or the head scratching the plate (oh god...). Drive stops and usb power is disconnected. I reconnect it - it shows up fine - reads/writes. The drive was not reading/writing when i moved it. Did I damage my drive? Are these things that fragile? I thought them to be at least as durable as a standard 2.5" internal drive. Am I mistaken?

  Read the article

• Does Mac OS X throttle the RATE of socket creation?

  - by pbhogan

  This may seem programming related, but this is an OS question. I'm writing a small high performance daemon that takes thousands of connections per second. It's working fine on Linux (specifically Ubuntu 9.10 on EC2). On Mac OS X if I throw a few thousand connections at it (roughly about 16350) in a benchmark that simply opens a connection, does it's thing and closes the connection, then the benchmark program hangs for several seconds waiting for a socket to become available before continuing (or timing out in the process). I used both Apache Bench as well as Siege (to make sure it wasn't the benchmark application). So why/how is Mac OS X limiting the RATE at which sockets can be used, and can I stop it from doing this? Or is there something else going on? I know there is a file descriptor limit, but I'm not hitting that. There is no error on accepting a socket, it's simply hangs for a while after the first (roughly) 16000, waiting -- I assume -- for the OS to release a socket. This shouldn't happen since all prior the sockets are closed at that point. They're supposed to come available at the rate they're closed, and do on Ubuntu, but there seems to be some kind of multi (5-10?) second delay on Mac OS X. I tried tweaking with ulimit every-which-way. Nada.

  Read the article

• Does Mac OS X throttle the RATE of socket creation?

  - by pbhogan

  This may seem programming related, but this is an OS question. I'm writing a small high performance daemon that takes thousands of connections per second. It's working fine on Linux (specifically Ubuntu 9.10 on EC2). On Mac OS X if I throw a few thousand connections at it (roughly about 16350) in a benchmark that simply opens a connection, does it's thing and closes the connection, then the benchmark program hangs for several seconds waiting for a socket to become available before continuing (or timing out in the process). I used both Apache Bench as well as Siege (to make sure it wasn't the benchmark application). So why/how is Mac OS X limiting the RATE at which sockets can be used, and can I stop it from doing this? Or is there something else going on? I know there is a file descriptor limit, but I'm not hitting that. There is no error on accepting a socket, it's simply hangs for a while after the first (roughly) 16000, waiting -- I assume -- for the OS to release a socket. This shouldn't happen since all prior the sockets are closed at that point. They're supposed to come available at the rate they're closed, and do on Ubuntu, but there seems to be some kind of multi (5-10?) second delay on Mac OS X. I tried tweaking with ulimit every-which-way. Nada.

  Read the article

• Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

  - by xhyperx

  The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

  Read the article

• how to build network across buildings ?

  - by Omie

  Hi ! I need some help in building a network between hundreds of computers spread across multiple buildings of my college. Yes, I'll be doing this as a part of my college project. Please see this image, it will give you enough idea of what I'm trying to achieve. http://i.imgur.com/rOohx.png All the computers in all buildings should be able to connect server. Once network is up, there will be a set of services over intranet and network use will be moderate. well, say there will be an email server and a http server. My point is, I cannot afford much of performance loss. It feels easy to connect computers inside 1 building to each other, however, I'm clueless as to how to connect all of them to server. I mean, just 1 cable won't be enough to connect 1 building to server, right ? How should I go with it ? I am not expecting detailed configuration. Just heads up will do :) Thanks

  Read the article

• Access 2010 datasheet view only/relationships unavailable

  - by Luis

  I'm relatively new to MS Access in general and just started working with Access 2010. I've created a new web database with a few tables that I need to relate. First problem: For the life of me, I can't view anything in any view other than datasheet view; everywhere I would expect to be able to change the view, only datasheet view is available. Second problem: I can't change the primary key(s). Presumably I would be able to do this if I could get out of datasheet view and into design view. Third problem: The 'Relationships' button is greyed out. I know these appear to be really simple things but I've been looking for much more time than I'd like to admit trying to figure out how to get unstuck. Update: It would appear that this is happening because it is a 'web database' as I've been able to do all of the above in a new regular database. With this in mind let me ask a different question: Am I able to add relationships and change primary keys in a web database? If so how? More generally, what is the point of a web database?

  Read the article

• locale: What is the LANGUAGE variable used for? (and when?)

  - by seya

  I am trying to understand the locales used in Linux. On my Ubuntu 11.10 system locale puts out the following: LANG=en_DK.UTF-8 LANGUAGE=en_GB:en LC_CTYPE=en_GB.UTF-8 LC_NUMERIC="en_DK.UTF-8" LC_TIME="en_DK.UTF-8" LC_COLLATE=en_GB.UTF-8 LC_MONETARY="en_DK.UTF-8" LC_MESSAGES=en_GB.UTF-8 LC_PAPER="en_DK.UTF-8" LC_NAME="en_DK.UTF-8" LC_ADDRESS="en_DK.UTF-8" LC_TELEPHONE="en_DK.UTF-8" LC_MEASUREMENT="en_DK.UTF-8" LC_IDENTIFICATION="en_DK.UTF-8" LC_ALL= (en_dk is for using international day format, continental European number formatting (1.234,56) etc.) I think I understand what the LC_* family does, that LANG is the fallback if one of them is not set and that LC_ALL sets all of the LC_* variables to its value. What I don't know yet, is what LANGUAGE is used for. The notation en_GB:en reminds me of the Accept-Language HTTP header. With the settings above it would mean, British English is used, if a translation for it exists. Otherwise any existing English translation (en_US, en_AU, ..., whatever) would be used. Am I right so far? Also what programs actually obey the LANGUAGE setting? In how far is it different from LC_MESSAGES? Unfortunately, man locale only documents the LC_* family. And searching the web for 'linux locale LANGUAGE' or similar is a mute point. (Of course language is a word often used when talking about locales, and it may also be shown just in the output of locale without being discussed). Does anybody of you can help me out there?

  Read the article

• how to export VARs from a subshell to a parent shell?

  - by webwesen

  I have a Korn shell script #!/bin/ksh # set the right ENV case $INPUT in abc) export BIN=${ABC_BIN} ;; def) export BIN=${DEF_BIN} ;; *) export BIN=${BASE_BIN} ;; esac # exit 0 <- bad idea for sourcing the file now these VARs are export'ed only in a subshell, but I want them to be set in my parent shell as well, so when I am at the prompt those vars are still set correctly. I know about . .myscript.sh but is there a way to do it without 'sourcing'? as my users often forget to 'source'. EDIT1: removing the "exit 0" part - this was just me typing without thinking first EDIT2: to add more detail on why do i need this: my developers write code for (for simplicity sake) 2 apps : ABC & DEF. every app is run in production by separate users usrabc and usrdef, hence have setup their $BIN, $CFG, $ORA_HOME, whatever - specific to their apps. so ABC's $BIN = /opt/abc/bin # $ABC_BIN in the above script DEF's $BIN = /opt/def/bin # $DEF_BIN etc. now, on the dev box developers can develop both ABC and DEF at the same time under their own user account 'justin_case', and I make them source the file (above) so that they can switch their ENV var settings back and forth. ($BIN should point to $ABC_BIN at one time and then I need to switch to $BIN=$DEF_BIN) now, the script should also create new sandboxes for parallel development of the same app, etc. this makes me to do it interactively, asking for sandbox name, etc. /home/justin_case/sandbox_abc_beta2 /home/justin_case/sandbox_abc_r1 /home/justin_case/sandbox_def_r1 the other option i have considered is writing aliases and add them to every users' profile alias 'setup_env=. .myscript.sh' and run it with setup_env parameter1 ... parameterX this makes more sense to me now

  Read the article

• Anyone recommend a program to print multiple HTML files at once for end users?

  - by Keith Bentrup

  I have some clients with multiple html files in folders that are occasionally updated & printed. They would like to be able to print them all at once without having to open each one. I typically do this with a quick command for myself, but I'm unaware of any freeware to do this. After a google search, I'm not finding one, so I'm hoping someone can help. I'd rather not use a script to do this for various security/ease of use/familiarity reasons, I'd rather be able to just point to a simple program they can download and use on their windows desktops. Anyone know of one or some other easy solution to do this? Maybe I'm overlooking the obvious. If anyone's curious, this is what I do for myself (not for my clients): for %h in (*.html) do type "%h" >> all.htm then open all.htm & print. If I need a page break on each doc, I just search and replace in all.htm </body> with <p style="page-break-after:always">&nbsp;</p></body>. It's quick & simple, but too unfamiliar for them. Thanks!

  Read the article

• How can I change the file name of the Program Files (x86) folder?

  - by Madrauk

  Let me stop you before the "you shouldn't do that" and "you will corrupt your file paths". I know what I'm doing, but I'll give you the story to convince you. Basically, my hard drive is failing to the point where programs installed on it are not responding consistently. So, in preparation for my replacement, I'm moving as many files as possible to my secondary because the new drive will be smaller (it's an emergency I can't buy a fancy expensive new drive) and so I can actually use my computer until the new drive comes in. The basic idea behind what I'm doing is I've copied the contents of the Program Files x86 folder to another spot on my other drive, and I want to replace the original folder in the C drive with a symbolic link that points to the other drive, so the programs can run from that drive and be fine but it will save space on my C drive and simplify the moving process when the new one comes in. To do that, I need to rename the program files folder, make the symbolic link, hopefully delete the program files folder, then restart my computer so all the programs are running properly and I can confirm it works. Now that I've told you why, can anyone help me out?

  Read the article

• Reverse NAT Setup for Hyper-V on Win 2008 R2

  - by sukru

  I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned out to be a non trivial task. As a staring point, I tried forwarding port 22 (SSH) to the virtual machine. The virtual machine is on a public interface (i.e.: it also has a visible IP on the same network as the host). On RRAS management console I tried to add a rule, by adding "Local Area Connection" to NAT pool (Public Interface - Enable Nat), and an incoming rule for port 22 - :22. I also tried with the same port enabled on Windows Firewall (and not). The NAT management page tells there are "1 mappings" and "30+ Outbound packets transleted". However all other counters (Inbound packets translated, and respective rejected ones) are always zero. (I'm trying to access the server from an external machine). I can directly access the service if I give the VM's public IP, but not the host's one. Is there a way to enable this on RRAS?

  Read the article

• Why would my network slow down?

  - by monkthemighty

  The network at my work has about 40 computers on it and a quite a few printers. When there are a lot of people working the network will be slow. I can test the ping between my computer and the router and it will keep rising, sometimes to the point that it times out. The router we are using is running Ubuntu on a atom processor and it has 4gb of ram. When the network slows the process Ksoftirq will be using most if not all of the processing power. I have found that Ksoftirq is a process that handles irq requests. Also when the network slows down I have captured packets from the router and using tshark and looked at it using wireshark on my laptop. With the capture show a lot of packets with TCP Dup ACK and TCP Retransmissions. The destinations of the TCP Dup and TCP retransmissions are to most of the computers on the network but there are some that are far more than others. What could this problem be caused by?

  Read the article

• How many bootable partitions are possible to have on one hard drive?

  - by draiden

  This may not be the correct place to post this; if that's the case, just let me know and point me in the right direction please! I'm thinking of building a box that needs to be lightweight and portable, and would need to be able to boot multiple installations of windows. I am needing to have multiple installations so that I can, for example, plug the box in to the network at one location, boot in to that location's partition, and have full access to everything I would normally need to do on a computer that has already been set up on that network. Then, when I go to the next client, I would be able to do the same thing, with the new location's partition, and have all of those network settings, drive mappings, etc., available there. Obviously I'd need to go through and set them all up on the different locations/networks, I'm not expecting it to magically know where I am and what I'm doing. It would be like I'm carrying around a computer that is configured for each place I need to go in one little box, instead of having to have multiple computers or having to reconfigure all the settings and such every time I go to another client. Or is there an easier way to do this that I haven't learned of?

  Read the article

• Is it possible to ack nagios alerts from the terminal on a remote workstation?

  - by cat pants

  I have nagios alerts set up to come through jabber with an http link to ack. Is is possible there is a script I can run from a terminal on a remote workstation that takes the hostname as a parameter and acks the alert? ./ack hostname The benefit, while seemingly mundane, is threefold. First, take http load off nagios. Secondly, nagios http pages can take up to 10-20 seconds to load, so I want to save time there. Thirdly, avoiding slower use of mouse + web interface + firefox/other annoyingly slow browser. Ideally, I would like a script bound to a keyboard shortcut that simply acks the most recent alert. Finally, I want to take the inputs from a joystick, buttons and whatnot, and connect one to a big red button bound to the script so I can just ack the most recent nagios alert by hitting the button lol. (It would be rad too if the button had a screen on the enclosure that showed the text of the alert getting acked lol) Make fun of me all you want, but this is actually something that would be useful to me. If I can save five seconds per alert, and I get 200 alerts per day I need to ack, that's saving me 15 minutes a day. And isn't the whole point of the sysadmin to automate what can be automated? Thanks!

  Read the article

• Walk me through the Linux log files (please)

  - by Andy

  Hey all, I just tried loading a 2MB file in gedit and it silently died on me. I was wondering if anything might appear in a log file that might help me diagnose this: I checked syslog and found out it segfaulted. While doing this I realised that I don't really know anything about how logging is organised on *nix machines. All I know at the mo is Logs are typically stored in /var/log/... is there anywhere else that I should know about? I'm familiar with application specific logs, such as apache's. I understand that dmesg is the bootup log, and syslog is a general system log... is that right? So would someone mind taking me through the most useful logs? Are the two logs I mention in the final point the only general logs? And what are the funky numbers at the start of lines in dmesg? Seconds since startup? Please include anything in your answers that you think would improve my understanding here and help me track down anomalies! TIA Andy

  Read the article

• Faster caching method

  - by pataroulis

  I have a service that provides HTML code which at some point it is not updated anymore. The code is always generated dynamically from a database with 10 million entries so each HTML code page rendering searches there for say 60 or 70 of those entries and then renders the page. So, for those expired pages, I want to use a caching system which will be VERY simple (like just enter a record with the rendered HTML and (if I need) remove it). I tried to do it file-based but the search for the existence of a file and then passing it through php to actually render it , seems like too much for what I want to do. I was thinking of doing it on mysql with a table with MEDIUMBLOBs (each page is around 100k). It would hold about 150000 such records (for now, at least). My question is: Would it be faster to let mysql do the lookup of the file and the passing to php or is the file-based approach faster? The lookup code for the file based version looks like this: $page = @file_get_contents(getCacheFilename($pageId)); if($page!=NULL) { echo $page; } else { renderAndCachePage($pageId); } which does one lookup whether it finds the file or not. The mysql table would just have an ID (the page id) and the blob entry. The disk of the system is a simple SATA raid 1 , the mysql daemon can grab up to 2.5GB of memory (i have a proxy running too, eating the rest of the 16GB of the machine. ) In general the disk is quite busy already. My not using PEAR cache, is because I think (please feel free to correct me on this) it adds overhead I do not need because the page rendering code is called about 2M times per day and I wouldn't want to go through the whole code each time (and yes, I have eaccelerator to cache the code too). Any pointer to what direction I should go, would be greatly welcome. Thanks!

  Read the article

• What happened to 'Copy Public Gallery Link' for folders in Photos in Dropbox?

  - by Transgenic

  I've been trying to figure out how to use the 'Photos' folder properly, but it does not seem to contain the functionality that is mentioned on various websites. From what I've read, you are supposed to create a folder within the 'Photos' folder. At that point, it becomes a public gallery for which you can access the context menu item Copy Public Gallery Link. However, I do not have this context menu item. I found a topic on the DropBox forum, but it is 2 years old. Even the various website information mentioned is over a year old. I found a topic from this year on SuperUser that mentions about the Share link menu item. I understand that this functionality is basically the same as Copy Public Gallery Link, however, the key difference is that it opens the website for which I need to click 'Copy link to this page' link, which then adds it to the clipboard. My primary questions are: Did they phase out the Copy Public Gallery Link from the context menu entirely? If not, is there a way to re-enable this menu item? If not, am I using the Photos folder properly? Lastly, if there is no way to get this menu item, is there some kind of script or hack-around that will let me simplify the Shark link + Copy link to this page functionality without requiring it to open my web browser? Note: I had to edit my post to remove other website links that I mention since I'm considered a 'New User' here and am only able to post 2 hyperlinks. Sorry.

  Read the article

• Exchange 2003 inbound routing issue

  - by user565712

  Just recently we started experiencing inbound routing issues. Email adddressed to [email protected] is intermittantly translated to [email protected]. This is happening for several users and, as stated, is intermittant. I don't know where to start looking for the solution. Is this an Exchange issue? A DNS issue? We have a single Exchange server inside our network with an FQDN of server.domain.local with a single SMTP Virtual Server. The Advanced properties of the Delivery tab of the Virt Server has an empty Masquerade Domain textbox and the value for the FDQN text-box is set to the domain itself, domain.com. The DNS record for domain.com is a CNAME entry referencing www.domain.com. Is this somehow related to the problem? I checked the headers of the inbound messages that generated NDRs as a result of being sent to [email protected] and nowhere in the header is www.domain.com mentioned. To make my life even more difficult, we use Postini as a third-party SPAM filtering service. Our MX records point to the Postini servers and Postini delivers the messages to our server. Perhaps it is Postini that is mucking things up? sigh I'm having trouble with this one and the intermittent aspect is making it that much more difficult for me. Any ideas?

  Read the article

• Redirect without changing URL

  - by Coobadivin

  Here's the setup. We have a hardware load balancer with an http virtual cluster. Let's call this virtual cluster example1.com. This virtual cluster load balances between two squid reverse proxies which are also on the same physical servers as the web servers. Squid listens on 80 and points to itself as the cache_peer web server which listens on 81. We also have a standalone web server which we will call example2.com. What we are trying to do is create a subdirectory on example1.com called example1.com/example2. This will point to example2.com, but we want our users to stay at example1.com/example2 in their browser. So, it's like a redirect without actually being a redirect. How the hell do I go about doing this? Is this even possible? I'm looking at squid docs in the meantime. example1.com is running a proprietary web server - not Apache :( We can't host example2.com's content in example1.com's file system. These are two very different platforms.

  Read the article

• How can I get (g)Vim to display the character count of the current file?

  - by OwenP

  I like to write tutorials and articles for a programming forum I frequent. This forum has a character limit per post. I've used Notepad++ in the past to write posts and it keeps a live character count in the status bar. I'm starting to use gVim more and I really don't want to go back to Notepad++ at this point, but it is very useful to have this character count. If I go over the count, I usually end up pasting the post into Notepad++ so I can see when I've trimmed enough to get by the limit. I've seen suggestions that :set ruler would help, but this only gives the character count via the current column index on the current line. This would be great if I didn't use paragraph breaks, but I'm sure you'd agree that reading several thousand characters in one paragraph is not comfortable. I read the help and thought that rulerformat would work, but after looking over the statusline format it uses I didn't see anything that gives a character count for the current buffer. I've seen that there are plugins that add this, but I'm still dipping my toes into gVim and I'm not sure I want to load random plugins before I understand what they do. I'd prefer to use something built in to vim, but if it doesn't exist it doesn't exist. What should I do to accomplish my goal? If it involves a plugin, do you use it and how well does it work?

  Read the article

• Things to consider when building a continuous integration server?

  - by Dave

  I'm new to continuous integration, but immediately realize its value, and I want to get one set up right away. I have played with TeamCity and have it working in a VM great. Now, I don't want to spend money on another system, so I was planning on just doing the VM again on a faster machine (i.e. my dev system). There are a few questions that come to mind with this: Hard disk allocation - how big should it be? Sure, 60GB seems like more than enough, but people also used to think that we'd never need more than 64KB of RAM Backups - is it even important to back up the integration server? Sure, I guess it's nice so that one doesn't have to go through the entire configuration process again, but I would think that's about it. I could snapshot my VM every time I do a configuration change, and then do a backup of applications only (ignore the buildAgent stuff). Migration - if I want to go away from a VM on my dev system, to a new server, which maybe even runs Windows Server 2003, is it easy enough? Perhaps this is a particular point best suited for StackOverflow.

  Read the article

• Is is possible to guide installation of new programs using %ProgramFiles%? [closed]

  - by ??????? ???????????

  The purpose of this is to have the default "program files" (32 and 64 bit) folders located under an arbitrary path, possibly on a drive separate from where windows lives. Initially I thought that this may be done using a system environment variable through the dialog located under Control Panel - System - Advanced - Environment Variables. These variables turned out to be set in the registry under the key HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion. However, one particular entry is confusing. The ProgramFilesPath entry seems to point at an environment variable that is not defined under the same registry key. I could assume that the difference between ProgramFilesDir and ProgramFilesPath is none and that one of them exists as a backwards compatibility, but having some legitimate resource from Microsoft to look at would be better than guessing. After receiving some worrying feedback about having both 32 and 64bit applications in the same folder, I have decided not to ask about the feasibility of this to avoid discussion. The real question is if the desired effect is possible to attain by "cutting into" the windows setup process and modifying those registry entries as early as possible. These settings should be system wide and not only for software installed by a particular user. If this is indeed something that can be done, I wonder if there are any subtle pitfalls. Programs that expect libraries and other resources to be in default locations can probably be dealt with using the same technique as employed by Windows to re-map the "Documents and Settings" folders and the like (i.e. breaking legacy applications is not real concern).

  Read the article

• Intermittent 403 errors when using allow to limit access to url with both explicit IP and SetEnvIf

  - by rbieber

  We are running Apache 2.2.22 on a Solaris 10 environment. We have a specific URL that we want to limit access to by IP. We recently implemented a CDN and now have the added complexity that the IP's that a request are shown to be coming from are actually the CDN servers and not the ultimate end user. In the case that we need to back the CDN out, we want to handle the case where either the CDN is forwarding the request, or the ultimate client is sending the request directly. The CDN sends the end user IP address in an HTTP header (for this scenario that header is called "User-IP"). Here is the configuration that we have put in place: SetEnvIf User-IP (\d+\.\d+\.\d+\.\d+) REAL_USER_IP=$1 SetEnvIf REAL_USER_IP "(10\.1\.2\.3|192\.168\..+)" access_allowed=1 <Location /uri/> Order deny,allow Allow from 10.1.2.3 192.168. allow from env=access_allowed Deny from all </Location> This seems to work fine for a time, however at some point the web server starts serving 403 errors to the end user - so for some reason it is restricting access. The odd thing is that a bounce of the web server seems to resolve the issue, but only for a time - then the behavior comes back. It might be worthwhile to note as well that this URL is delegated to a JBoss server via mod_jk. The denial of access is, however; confirmed to be at the Apache layer and the issue only seems to happen after the server has been running for some time.

  Read the article

• How do I get Apache 2 to read this directory?

  - by Mike

  I'm on Mac OSX and i I have apache2 installed via MacPorts, running as the _www user. I have some files I want to serve in the /Users/Me/Documents/abc folder. Right now, though, the permissions of /Users/Me/Documents are 700. So, _www can't get in, even if abc is chmod 777. I recognize the following options: Allow _www access to my Documents folder. Put the files I want to share outside of my Documents folder. Hard-link the files outside of my Documents folder, and point apache to the hard links. None of these solutions are acceptable to me, however. I don't feel safe allowing _www access to my entire Documents folder. I really want to keep the files in my Documents folder for other reasons. The files are changing all the time, so hard-linking would not always reflect the right file structure, and, as I understand it, you can't hard-link a directory (though, if you could, that would solve it). Any ideas for a solution? Is there a way to run a few httpd processes as my user account so it can get in there? Or, is there some way to hard-link a directory, or some way to get httpd to follow a symlink past a directory that is 700 not owned by _www? Thanks!

  Read the article

• VLAN across a router to give wireless access to remote sites?

  - by Don

  I've been looking online for this answer, but getting conflicting information. I was under the impression that you couldn't use a VLAN across a router, but maybe it's possible (according to some documentation I see online)? I was hoping someone could clear it up for me. Here's what I'm working with: We have a remote site with a handful of users. We recently gave them an access point (Cisco 1142n) for internal wireless. It's plugged into a switch and working fine (getting IPs from the same DHCP scope as the wired users are getting). Private wireless is set on VL50. At the home office we have private wireless for our internal network working and on VL50, with a test VLAN setup for VL60, which points to our DSL line for the time being. Both private and public wireless works fine internally (not crossing a router). VL50 is named the same at both sites for consistency in naming. If we wanted to give the remote site access to the public wireless (VL60), would that be possible across the routers? For more information, currently the site is connected to the home office via a T1 connection, Cisco routers on both ends. I didn't think it was possible due to the nature of VLANS being layer 2. But, I am from from an expert on this and would appreciate any instruction as to the actual truth of the matter. The end result I'm going for is, how to get our remote sites access to a public (outside) connection along with their private connection, without actually having a DSL (or similar type line) dropped at their location? Thanks in advance for your thoughts.

  Read the article

< Previous Page | 660 661 662 663 664 665 666 667 668 669 670 671  | Next Page >