Search Results

Search found 22300 results on 892 pages for 'half bit'.

Page 665/892 | < Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672  | Next Page >

• Windows Server Hyper-V guests cannot see each other on network

  - by Noldorin

  I have a Hyper-V physical machine along with two standard laptops running within my LAN (connected by an ASUS-RT56U router). The physical server runs Windows Hyper-V Server 2008 R2, with two Windows Server 2008 R2 (full) guest VMs installed and running within. Both laptops run Windows 7. All OSs are 64-bit. Opening up Network in Windows Explorer on either of the two laptops displays both of the laptops in the LAN fine. However, neither of the guest VMs on the server (nor the host itself) are displayed. Indeed, the guest VMs can not see each other in Network view either. I can ping all computers (laptops and servers) without problems from within the LAN, but all of the servers are simply not visible from anywhere. In addition, the Network Map screen (accessible via Network and Sharing centre) gives me an error message: "An error happened during the mapping process." And I'm suspecting this might have something to do with how LLTP (Link Layer Topology Protocol) is working on the network. Worth noting though is that before my server was on the network, the Network Map screen displayed fine (as far as I can remember).

  Read the article

• Windows Server Hyper-V guests cannot see each other on network

  - by Noldorin

  I have a Hyper-V physical machine along with two standard laptops running within my LAN (connected by an ASUS-RT56U router). The physical server runs Windows Hyper-V Server 2008 R2, with two Windows Server 2008 R2 (full) guest VMs installed and running within. Both laptops run Windows 7. All OSs are 64-bit. Opening up Network in Windows Explorer on either of the two laptops displays both of the laptops in the LAN fine. However, neither of the guest VMs on the server (nor the host itself) are displayed. Indeed, the guest VMs can not see each other in Network view either. I can ping all computers (laptops and servers) without problems from within the LAN, but all of the servers are simply not visible from anywhere. In addition, the Network Map screen (accessible via Network and Sharing centre) gives me an error message: "An error happened during the mapping process." And I'm suspecting this might have something to do with how LLTP (Link Layer Topology Protocol) is working on the network. Worth noting though is that before my server was on the network, the Network Map screen displayed fine (as far as I can remember).

  Read the article

• Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

  - by Paul Hobart

  I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

  Read the article

• Windows DNS Server 2008 R2 fallaciously returns SERVFAIL

  - by Easter Sunshine

  I have a Windows 2008 R2 domain controller which is also a DNS server. When resolving certain TLDs, it returns a SERVFAIL: $ dig bogus. ; <<>> DiG 9.8.1 <<>> bogus. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31919 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A I get the same result for a real TLD like com. when querying the DC as shown above. Compare to a BIND server that is working as expected: $ dig bogus. @128.59.59.70 ; <<>> DiG 9.8.1 <<>> bogus. @128.59.59.70 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 30141 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A ;; AUTHORITY SECTION: . 10800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012012501 1800 900 604800 86400 ;; Query time: 18 msec ;; SERVER: 128.59.59.70#53(128.59.59.70) ;; WHEN: Wed Jan 25 14:09:14 2012 ;; MSG SIZE rcvd: 98 Similarly, when I query my Windows DNS server with dig . any, I get a SERVFAIL but the BIND servers return the root zone as expected. This sounds similar to the issue described in http://support.microsoft.com/kb/968372 except I am using two forwarders (128.59.59.70 from above as well as 128.59.62.10) and falling back to root hints so the preconditions to expose the issue are not the same. Nevertheless, I also applied the MaxCacheTTL registry fix as described and restarted DNS and the whole server as well but the problem persists. The problem occurs on all domain controllers in this domain and has occurred since half a year ago, even though the servers are getting automatic Windows updates. EDIT Here is a debug log. The client is 160.39.114.110, which is my workstation. 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Rcv 160.39.114.110 2e94 Q [0001 D NOERROR] A (5)bogus(0) UDP question info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x0100 QR 0 (QUESTION) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 0 Z 0 CD 0 AD 0 RCODE 0 (NOERROR) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Snd 160.39.114.110 2e94 R Q [8281 DR SERVFAIL] A (5)bogus(0) UDP response info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x8182 QR 1 (RESPONSE) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 1 Z 0 CD 0 AD 0 RCODE 2 (SERVFAIL) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty Every option in the debug log box was checked except "filter by IP". By contrast, when I query, say, accounts.google.com, I can see the DNS server go out to its forwarder (128.59.59.70, for example). In this case, I didn't see any packets going out from my DNS server even though bogus. was not in the cache (the debug log was already running and this is the first time I queried this server for bogus. or any TLD). It just returned SERVFAIL without consulting any other DNS server, as in the Microsoft KB article linked above.

  Read the article

• How much network latency is "typical" for east - west coast USA?

  - by Jeff Atwood

  At the moment we're trying to decide whether to move our datacenter from the west coast to the east coast. However, I am seeing some disturbing latency numbers from my west coast location to the east coast. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: West coast to east coast: 215 ms latency, 46 ms transfer time, 261 ms total West coast to west coast: 114 ms latency, 41 ms transfer time, 155 ms total It makes sense that Corvallis, OR is geographically closer to my location in Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only increased 10%, yet the latency increased 100%! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... Does routing distance affect performance significantly? How does geography affect network latency? Latency in Internet connections from Europe to USA ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

  Read the article

• Simple P2V help from Linux to Windows

  - by Ke

  Hi, I have two OS's installed on different drives in my PC. One linux (Centos 5.4) and one windows 7. Its getting tiresome to constantly have to stop and restart the PC when I want to use either OS. I would very much like to use Windows 7 as my host OS and access my linux OS from within Windows. However, im having trouble deciphering exactly how to do this (many of the articles seem confusing and a bit overkill) From what i have seen its possible to use VMWare converter to convert the physical linux image to a virtual image so that I can use it in windows. As im having problems understanding how this is done, I would really appreciate a step by step guide (for a newbie), or any simple tutorials that you can point me at. Some questions beforehand: 1) My linux image is around 80gb, do i need to take this into consideration? The linux drive is around 180gb in total. All my other drives are NTFS non writeable in linux (as I use them in windows and ntfs is dodgy in linux), so probably not possible to move the image over to my ntfs drives 2) Can I just zip the linux files up somehow and transfer it to windows to create the p2v? 3) Is it possible to do the P2V conversion while I am logged into windows. I can see the actual linux drive loaded in disk manager, but windows doesnt read linux file systems so im confused as to how to access the linux drive if this is possible. 4) Or will i need to do the whole p2v conversion inside linux? Cheers, any help is much appreciated Ke (a confused p2v newbie)

  Read the article

• Second ip address on same interface CentOS 6.3

  - by user16081

  I tried to add a second LAN addresses in CentOS 6.3 on a brand new install and it's not working. I installed a new copy of CentOS 5.7 and tried the same and it worked right away. Now I'm just trying to setup the alias on the same subnet and it's not working. what am i doing wrong, is this not possible on CentOS 6.3? second ip address on the same interface but on a different subnet CentOS 5.7 it works: DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.167 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.166 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes On CentOS 6.3: does not work DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.242 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 ONBOOT=yes DNS1=205.134.232.138 DNS2=4.4.4.4 DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.240 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes # /etc/init.d/network restart Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK Bringing up interface eth0: Active connection state: activated Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/3 [ OK ] # ping 192.168.0.240 PING 192.168.0.240 (192.168.0.240) 56(84) bytes of data. From 192.168.0.242 icmp_seq=2 Destination Host Unreachable Appreciate any advice, thanks Update: Perhaps this is relevant? On CentOS 5.7: # dmesg |grep eth eth0: registered as PCnet/PCI II 79C970A eth0: link up eth0: link up On 6.3: # dmesg | grep eth e1000 0000:02:00.0: eth0: (PCI:66MHz:32-bit) 00:0c:29:1e:de:86 e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 8021q: adding VLAN 0 to HW filter on device eth0 eth0: no IPv6 routers present

  Read the article

• Microsoft Security Essentials & MsMpEng.exe hogging resources

  - by Mike

  I've been using MSE for a couple months now, never had a single problem. All of a sudden the process "MsMpEng.exe" will randomly go crazy and hog all my system resources so I can't do anything unless I kill it in the task manager. (I've quit the program for now and my comp is running smooth). When I restart the program, reboot, whatever, it goes off and hogs all the resources again after a couple minutes. If I kill the process it will go away and then come back a couple minutes later and do the same thing. I've scanned with MSE, another antivirus and malware with no probs. Any ideas? Should I uninstall and find something else? The thing is I've liked it so far. I'm running Win7 64-bit. Also, I'm not running any other conflicting security programs. This is the only one on my PC right now. Windows Defender is also off.

  Read the article

• PNP4Nagios, nagiosgraph, separate Cacti, or something else for Nagios trending.

  - by Matt

  I've been using Nagios for a while now and recently started using Cacti after being dissatisfied with the lack of scaling and lack of any GUI in MRTG. I'm interested in adding trending to my Nagios installation and wondered what was the best route to go. I've looked around a bit and have seen what's available, but there's not a lot of information around to differentiate them from each other. My Nagios install has about 250 hosts and 1100 service checks, but many of them are just simple network devices and there's only about 20 servers and 300 services associated with them. All servers but 2 are running Windows Server 2003. What are the main highlights of PNP4Nagios vs. nagiosgraph, or would I be better off using some sort of tool to convert the data to RRD form and just view it directly in Cacti? Is there a completely different direction I could go that would be even better? Please comment if you need any more information, I tend to be too wordy and tried to keep this question brief. Thanks!

  Read the article

• How to write re-usable puppet definitions?

  - by Oliver Probst

  I'd like to write a puppet manifest to install and configure an application on target servers. Parts of this manifest shall be re-usable. Thus I used define for defining my re-usable functionality. Doing so, I've always the problem that there are parts of the definition which are not re-usable. A simple example is a bunch of configuration files to be created. These file must be placed in the same directory. This directory must be created only once. Example: nodes.pp node 'myNode.in.a.domain' { mymodule::addconfig {'configfile1.xml': param => 'somevalue', } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', } } mymodule.pp define mymodule::addconfig ($param) { $config_dir = "/the/directory/" #ensure that directory exits: file { $config_dir: ensure => directory, } #create the configuration file: file { $name: path => "${config_dir}/${name}" content => template('a_template.erb'), require => File[$config_dir], } } This example will fail, because now the resource file {$config_dir: is defined twice. As far as I understood, it is required to extract these parts into a class. Then it looks like this: nodes.pp node 'myNode.in.a.domain' { class { 'mymodule::createConfigurationDirectory': } mymodule::addconfig {'configfile1.xml': param => 'somevalue', require => Class ['mymodule::createConfigurationDirectory'], } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', require => Class ['mymodule::createConfigurationDirectory'], } } But this makes my interface hard use. Every user of my module has to know, that there is a class which is additionally required. For this simple use case the additional class might be acceptable. But with growing module complexity (lots of definitions) I'm a bit afraid of confusing the modules user. So I'd like to know is there a better way to handle this dependencies. Ideally, classes like createConfigurationDirectory are hidden from the user of the modules api. Or are there some other "Best Practices"/Patterns handling such dependencies?

  Read the article

• SQL Server on Linux

  - by TimothyAWiseman

  For a particular project that is coming up, I am trying to expand my knowledge of Linux, so I am going to set up a Linux system at home. Rather than dual booting, I am thinking about putting SQL Server on a Windows Virtual Machine with Linux as the host at least until this project is over when I will probably switch back to Linux. So, I have a couple of different, but interrelated questions: How well does this work? This is only a test machine at home, so I can easily accept a fair bit of degradation, but if it is going to be a horrible reduction in performance I will dual boot instead. Is there a particular virtual machine manager I should look at to go this route? Since this is my personal machine, price is an issue but I am quite happy to pay a reasonable amount. And finally, given the choice of VMM, is there a particular Linux Distro I should be looking at? [This has been cross posted at Ask.SqlServerCentral.com . I think it may be appropriate at both sites. ]

  Read the article

• Canonical Redirect on Dynamic Mass Virtual Hosts on Apache

  - by Josh

  I have a Web app on Apache that allows users to point their domain to the server. Right now I'm using Apache's dynamic mass virtual hosts with an entry VirtualDocumentRoot /www/hosts/%0/docs So with www.companydomain.com it points to /www/hosts/www.companydomain.com/docs The problem is when the user goes to companydomain.com it will point to /www/hosts/companydomain.com/docs Is there an easy way to automatically have Apache check to see if a directory exists for the virtual host, and if not, look for the host name with "www." in front of it? Other subdomains are fine (i.e. abc.domain.com should point to a diff. directory than def.domain.com) but the whole "www" issue is a mystery to me. I am using dynamic mass virtual hosts so the server does not have to restart after each registration for the application. If there is a different way that is fine as long as apache isn't restarted each time. How can I accomplish this? Worst case scenario if there were a way to redirect to a "default" location on the server if not found I could always do a check via PHP or something but I feel like that is a bit hacked together and there has to be a more efficient way. Thanks in advance!

  Read the article

• How do you verify a restore?

  - by Nic

  What tool(s) would you use to verify that a restored file structure is whole and complete? My environment is a Windows Server 2008 file server. (We use tape for backup, but that is inconsequential.) I am specifically looking for a tool that will: Record the names of all files and folders below a specified directory Optionally calculate checksums of each file encountered Save this index in a human-readable format Compare the index against restored data and show differences Some background: I recently had to replace the disks in our file server. The upgrade was scheduled to start 36 hours after the most recent full backup, so I created a differential backup. However, it turns out that one of our applications was clearing the archive bit on files saved to the server, so these were not included in the differential backup. I was unaware of this until my users reported some files as missing. Aside from this, are there any other common methods for validating the integrity of a restore? I am frequently told that testing backups by restoring them is the only way to know that backups are working, but how do you deal with the case where it works 99% correctly and the other 1% silently fails?

  Read the article

• How to make 7-Zip faster

  - by Matt

  I normally use WinRAR over 7-Zip simply because it's faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7-Zip and WinRAR default settings on their normal compression and their best compression, and in a lot of cases WinRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7-Zip speed up? I'd like it to at least be on par with WinRAR's speed Is there a way to make recovery segments in 7-Zip like you can in WinRAR? I didn't see any, but I guess it could be a command line thing. I tested WinRAR and 7-Zip using the latest stable version of each (4-dot-something with 7-Zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core Intel i7 720 (1.6 GHz)/(2.8 GHz) with 4 GB DDR3 RAM, and the 64-bit version of 7-Zip, and dual-boot Debian x64 5.0.4 and Windows 7 Home.

  Read the article

• Windows 7 Media Center PC not displaying MKV files properly

  - by David

  Does anyone know why Windows Media Center wouldn't correctly display a 16x9 video? I just upgraded my home-built HTPC from Vista Ultimate (hey, it was a giveaway) to Windows 7 Ultimate - clean install. After that, I installed the Divx7 beta (to get .MKV support) and AC3filter (so I could HEAR the MKV files). Previously, under Vista Ultimate (32 bit), I had Arcsoft's Total Theater Pro for playing Blu-Rays and MKV decoding under Media Center. Now when I play a 720p 16x9 MKV file, I get some 'letterboxing' - like it's halfway between 4x3 and 16x9 - with the aspect ration looking alightly squished as a result. Here's the wierd part. If I use the Media Center connection software in my XBox 360 - it plays perfectly, filling the 16x9 screen edge-to-edge, just like Vista's WMC software USED to. Of course, beats the network up because the XBox goes to the HTPC, the HTPC goes to my WHS machine to fetch the data, it comes back to the HTPC, gets transcoded and streamed back to the Xbox. I'm running the latest drivers for an NVidia card (as fetched by Windows 7). I have no idea WHY this is because if I play "ordinary" (i.s. SD) Divx files that are 16x9, they play just fine, scaled right up to my screen's edges. It puzzles me as to why the same machine that properly converts the bits for the Xbox can't display/scale them properly for the attached display. Mind you, Windows Media Player exhibits the same symptoms. Ideas?

  Read the article

• Migrating Windows 2003 File Server Cluster to Windows 2008 R2 Standalone?

  - by Tatas

  We have a situation where we have an aging Windows 2003 File Server Cluster that we'd like to move to a standalone Windows Server 2008 R2 VM that resides in our Hyper-V R2 installation. We see no need to keep the Clustering as Hyper-V is now providing our Failover/Redundancy. Usually, in a standalone file server migration we migrate the data, preserving NTFS permissions and then export the sharing permissions from the registry and import them on the new server. This does not appear possible in this instance, as the 2003 cluster stores the sharing permissions quite differently. My question is, how would one perform this type of migration? Is it even possible? My current lead is the File Server Migration Toolkit, however I can find no information on the net about migrating from cluster to standalone, only the opposite. Please help. UPDATE: We ended up getting the data copied over (permissions intact), but had to recreate the shares manually by hand. It was a bit of a pain but it did in the end work out.

  Read the article

• EC2 Configuration

  - by user123683

  I am trying to create a server structure for my EC2 account. The design I have chosen consists of 2 instances running in different availability zones, elastic load balancer, an auto-scaling group with cloudwatch monitoring configured and a security group defining rules for access to the instances. This setup is to support an online web application written in PHP. I am trying to decide what is a better policy: Store MySQL DB on a separate Instance Store MySQL DB on an attached EBS volume (from what i know auto-scaling will not replicate the attached EBS volume but will generate new instances from a chosen AMI - is this view correct?) Regards the AMI I plan to use a basic Amazon linux 64 bit AMI, and install bastille (maybe OSSEC) but I am looking to also use an encrypted file system. Are there any issues using an encrypted file system and communication between the DB and webapp i neeed to be aware of? Are there any comms issues using the encrypted filesystem on the instance housing the webapp I was going to launch a second instance or attach a second volume in the second availability zone to act as a standby for the database - I'm just looking for some suggestions about how to get the two DB's to talk - will this be a big task Regards updates for security is it best to create a recent snapshot and just relaunch and allow Amazon to install updates on launch or is the yum update mechanism a suitable alternative - is it better practice to relaunch instead of updates being installed which force a restart. I plan to create two AMI snapshots one for the app server and one for the DB each with the same security measures in place - is this a reasonable - I just figure it is a better policy than having additional applications that are unnecessary included in a AMI that I intend on using. My plan for backup is to create periodic snapshots of the webapp and DB instances (if I use an additional EBS volume instead of separate instances my understanding is that the EBS volume will persist in S3 storage in the event of an unexpected termination and I can create snapshots of the volume backup purposes). Thanks in advance for suggestions and advice. I am new to EC2 and I may have described unnecessary overkill but I want to try implement what can be considered a best practice solution so all advice is appreciated.

  Read the article

• Calendar sharing between unrelated Domains

  - by vlannoob

  I have a 'request' from one of the 'big guys' that has me scratching my head a bit. He is one of our Executives that also is a board member of several other organistations, so he floats around between 4 different unrelated companies, each with their own domains, Exchange setup etc. He has domain accounts in each organisation. He has an iPad with multiple Exchange accounts so he can see all his calendars which works Ok for him - Apple calendaring bugs/flaws aside. What he wants is the ability for 'reception staff' at each organisation to 'see' all his calendars as they are booking things for him in their respective organisations calendars without it conflicting with bookings made in his calendars by other organisations......you with me?? So for example: Company A books a meeting into his Comapny A calendar at 9am Monday and Company B books him a meeting in his Company B Calendar at 9:15am Monday on the other side of town and of course Company C has him booked in all day Monday on their Company C calendar. He gets all those on his iPad but he would like either a 'global' calendar all can see and book into or the ability for receptionists at Company's A,B and C to see all the Calendars to avoid these kind of conflicts. I told him to 'go away' straight off the bat, I don't control anything to do with the other companies or know their infrastructure. And quite frankly I don't want any part of it...but he's whining and he's high enough up the food chain that I can't ignore him forever. I'm open to suggestions. Is there any third party software/services that can facilitiate this kind of setup? I really don't want to be creating users in my AD structure to people not ion our organisation so they can get access to his calendar and I am sure there sysadmins feel the same. As usual - any advice is greatly appreciated ;)

  Read the article

• Why is squid breaking kerberos/NTLM auth?

  - by DonEstefan

  I'm using squid 2.6.22 (Centos 5 Default) as a proxy. Squid seems to break the authentication process for web pages when they require NTLM or Kerberos Auth. I tested with sharepoint 2007 and tried all 3 authentication methods (NTLM, Kerberos, Basic). Accessing the site without squid works in all cases. When I access the same page with squid, then only basic-auth works. Using IE or Firefox desn't make any difference. Squid itself can be used by anybody (no auth_param configured). Its a bit tricky to find solutions online, since most of the topics whirl around auth_param for authenticating users to squid rather than authenticating users to a webpage behind squid. Could anyone help? Edit: Sorry, but my first test was totally screwed up. I tested against the wrong webservers (Memo to myself: always check assumptions before testing). Now I realized that the problem scenario is completely different. Kerberos work for IE Kerberos works for Firefox (after changing "network.negotiate-auth.trusted-uris" in about:config) NTLM works for IE NTLM does NOT work in Firefox (even after changing "network.automatic-ntlm-auth.trusted-uris" in about:config) By the way: The feature that provides NTLM-passthrough in squid is called "connection pinning" and the HTTP header "Proxy-support: Session-based-authentication""

  Read the article

• Trouble recovering MySQL InnoDB database after server crash

  - by Andy Shinn

  I had a server crash due to a broken iSCSI link (the filesystem went into read-only mode). After repairing the link and rebooting the machine (CentOS 5 / MySQL 5.1), the MySQL server would not start and gave the following error: 100603 19:11:46 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100603 19:11:46 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... InnoDB: Warning: database page corruption or a failed InnoDB: file read of page 112541. InnoDB: Trying to recover it from the doublewrite buffer. InnoDB: Dump of the page: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): lots of binary data 100603 19:11:46 InnoDB: Page checksum 953720272, prior-to-4.0.14-form checksum 2641912043 InnoDB: stored checksum 617821918, prior-to-4.0.14-form stored checksum 2080617765 InnoDB: Page lsn 115 2632899642, low 4 bytes of lsn at page end 2641594600 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Dump of corresponding page in doublewrite buffer: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): more binary data 100603 19:11:46 InnoDB: Page checksum 908374788, prior-to-4.0.14-form checksum 824841363 InnoDB: stored checksum 912869634, prior-to-4.0.14-form stored checksum 2210927931 InnoDB: Page lsn 115 2635312169, low 4 bytes of lsn at page end 2633173354 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Also the page in the doublewrite buffer is corrupt. InnoDB: Cannot continue operation. InnoDB: You can try to recover the database with the my.cnf InnoDB: option: InnoDB: innodb_force_recovery=6 100603 19:11:46 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended Per the error message, I have tried setting set-variable=innodb_force_recovery=6 in the my.cnf to get to the data. This allows the MySQL server to start. But when I try to do a mysqldump of the database or a SELECT * INTO OUTFILE "filename" FROM broken_table; it seems to endlessly just export the same line over and over again. I have also tried http://code.google.com/p/innodb-tools/. But this tool fails with an error that 'blob' type is not supported. If I try to access the data using the PHP application it crashes MySQL: `100603 19:19:19 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=2 max_threads=151 threads_connected=2 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338317 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x15d33f0 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x453aff00 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x24) [0x874364] /usr/libexec/mysqld(handle_segfault+0x346) [0x5c9166] /lib64/libpthread.so.0 [0x3a6e40eb10] /usr/libexec/mysqld(rec_get_offsets_func+0x30) [0x7cc310] /usr/libexec/mysqld [0x7674d8] /usr/libexec/mysqld(btr_search_info_update_slow+0x638) [0x768d48] /usr/libexec/mysqld(btr_cur_search_to_nth_level+0xc7d) [0x75f86d] /usr/libexec/mysqld [0x7dd1c1] /usr/libexec/mysqld(row_search_for_mysql+0x18b0) [0x7e03d0] /usr/libexec/mysqld(ha_innobase::general_fetch(unsigned char*, unsigned int, unsigned int)+0x7c) [0x7526fc] /usr/libexec/mysqld(handler::read_multi_range_next(st_key_multi_range**)+0x29) [0x6aed09] /usr/libexec/mysqld(QUICK_RANGE_SELECT::get_next()+0x194) [0x69a964] /usr/libexec/mysqld [0x6aafe9] /usr/libexec/mysqld(sub_select(JOIN*, st_join_table*, bool)+0x56) [0x635196] /usr/libexec/mysqld [0x63f9cd] /usr/libexec/mysqld(JOIN::exec()+0x950) [0x6497c0] /usr/libexec/mysqld(mysql_select(THD*, Item*, TABLE_LIST*, unsigned int, List&, Item*, unsigned int, st_order*, st_order*, Item*, st_order*, unsign ed long long, select_result*, st_select_lex_unit*, st_select_lex*)+0x17b) [0x64b34b] /usr/libexec/mysqld(handle_select(THD*, st_lex*, select_result*, unsigned long)+0x169) [0x64bc79] /usr/libexec/mysqld [0x5d34b6] /usr/libexec/mysqld(mysql_execute_command(THD*)+0x4e5) [0x5d6b45] /usr/libexec/mysqld(mysql_parse(THD*, char const*, unsigned int, char const)+0x211) [0x5dc321] /usr/libexec/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x10b8) [0x5dd3f8] /usr/libexec/mysqld(do_command(THD*)+0xe6) [0x5dd9e6] /usr/libexec/mysqld(handle_one_connection+0x73d) [0x5d036d] /lib64/libpthread.so.0 [0x3a6e40673d] /lib64/libc.so.6(clone+0x6d) [0x3a6d4d3d1d] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd-query at 0x15de5e0 = SELECT DISTINCT count(DISTINCT i.itemid) as rowscount,i.hostid FROM items i WHERE ((i.itemid BETWEEN 000000000000000 AND 0999999 99999999)) AND i.type<9 AND (i.hostid IN (10017,10047,10050,10054,10056,10059,10062,10063,10064,10065,10066,10067,10068,10069,10070,10071,10072,10073,100 74,10075,10076,10077,10078,10079,10080,10081,10082,10084,10088,10089,10090,10091,10092,10093,10094,10095,10096,10097,10098,10099,10100,10101,10102,10103,10 104,10105,10106,10107,10108,10109)) GROUP BY i.hostid thd-thread_id=3 thd-killed=NOT_KILLED The manual page at contains information that should help you find out what is causing the crash. 100603 19:19:19 mysqld_safe Number of processes running now: 0 100603 19:19:19 mysqld_safe mysqld restarted` Before recovering form an older backup as a last resort I am looking for anymore suggestions. Thanks!

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I understand this question is a bit out of the norm for stackoverflow, but I've run out of ideas. Thank you for any help you can provide.

  Read the article

• Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

  - by Kairan

  Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

  Read the article

• ssh timeout issue connecting to an EC2 instance on OS X

  - by mamusr

  I am new to AWS and not a networking expert but curious to know more about it. I created a VPC with a public subnet only. Then i created an EC2 instance using an Ubuntu 14.04 64-bit pv AMI image (ami-e84d8480) as well generating the key pair needed to connect to it through ssh. I followed amazon's instructions to connect to an EC2 instance via ssh which did not work. Here is my attempted input and debug log: Running on OS X 10.9.4 user$ ssh -vvv -i key.pem [email protected] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 102: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22. debug1: connect to address xxx.xxx.xxx.xxx port 22: Operation timed out ssh: connect to host xxx.xxx.xxx.xxx port 22: Operation timed out To attempt to resolve the issue: I enabled the SSH port. Tried different usernames other than ubuntu, like ec2-user and root. Initially set an inbound ssh rule in the security group to connect to only my ip address. When that did not work, i changed it to allow any ip to connect. But those actions did not fix the problem. Here are my guesses as to what i am missing in getting the EC2 instance connection to work. My etc/ssh_config file may be preventing the connection from taking place. I may have missed an important networking detail when setting up the VPC. I do not have a public ip address specified for the instance. I am connecting through the private ip address. My questions for the community: Am i going about it the wrong way connecting to the instance through the private ip address? if so, do i need to specify a public ip address for it to connect or some other method?

  Read the article

• TeamCity sends inadequate responses after Selenium tests

  - by Dmitriy Sukharev

  I have a TeamCity 7.0.2 at CentOS 6.2 server without X Server. I've installed x11-fonts*, xvfb, firefox, xauth, extracted env. variable DISPLAY=localhost:1, and started xvfb. After that I could start Selenium tests using maven. Tests are executed, but there's an issue with TeamCity. Usually TeamCity starts hehaves absolutely inadequate (it confuses images at the page, sends xml or strange text ampersants and numbers in responses and is a bit slower), also tests are executed 4 times slower (1h 15m) at server than at tester Windows 7-based machine (25m). It worth to notice that tests launch two Jetty servers for tested application (one for REST-services application and another for client). In TeamCity I set JVM command line parameters: -Xms256m -Xmx1224m -XX:MaxPermSize=320m, and Additional Maven command line parameters ends with "-DMAVEN_OPTS=-Xmx1024m" (without quotes). Also both web-services and TeamCity uses the same Oracle server (but different Oracle users). Finally TeamCity and its build agent is at the same server. Server has only 4GB of RAM, but during testing there're 400MB of RAM and 1.2GB of swap. TeamCity and Firefox uses about 65% of CPU during testing. There's no firefox process after end of testing. My knowledge about Selenium is weak. I only know that we use 2.20.0 version of selenium-java maven dependency. Please help me to determine why TeamCity sends wrong responces after Selenium tests. I've tried to give you all information I have, but feel free to ask me for more information.

  Read the article

• How to Change the Kerberos Default Ticket Lifetime

  - by user40497

  Our KDC servers are running either Ubuntu Dapper (2.6.15-28) or Hardy (2.6.24-19). The Kerberos software is the MIT implementation of Kerberos 5. By default, a Kerberos ticket lasts for 10 hours. However, we'd like to increase it a bit (e.g. 14 hours) to suit our needs better. I had done the following but the ticket lifetime still stays at 10 hours: 1) On all the KDC servers, set the following parameter under [realms] in /etc/krb5kdc/kdc.conf and restarted the KDC daemon: max_life = 14h 0m 0s 2) Via "kadmin", changed the "maxlife" for a test principal via "modprinc -maxlife 14hours ". "getprinc " shows that the maximum ticket life is indeed 14 hours: Maximum ticket life: 0 days 14:00:00 3) On a Kerberos client machine, set the following parameters under [libdefaults], [realms], [domain_realm], and [login] in /etc/krb5.conf (everywhere basically since nothing I tried had worked): ticket_lifetime = 13hrs default_lifetime = 13hrs With the above settings, I suppose that the ticket lifetime would be capped at 13 hours. When I do "k5start -l 14h -t ", I see that the end time for the "renew until" line is now 14 hours from the starting time: Valid starting Expires Service principal 04/13/10 16:42:05 04/14/10 02:42:05 krbtgt/@ renew until 04/14/10 06:42:03 "-l 13h" would make the end time in the "renew until" line 13 hours after the starting time. However, the ticket still expires in 10 hours (04/13 16:42:05 - 014/14 02:42:05). Am I not changing the right configuration file(s)/parameter(s), not specifying the right option when obtaining a Kerberos ticket, or something else? Any feedback is greatly appreciated! Thank you!

  Read the article

< Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672  | Next Page >