software sources - Page 665

Virtual OS using same Wallpaper as Host

- by Jeff

Greetings, I'm running a guest Linux OS on top of Windows XP, which rotates its wallpapers using the PowerToy Wallpaper Changer. I'm hoping for a way for my guest OS to somehow detect which wallpaper the host is using, and automatically switch to it. Why? Because if I run my guest OS in seamless mode and have transparent windows, I want the transparent background to match the host OS. It looks nice that way :). A couple tidbits of relevant information: Guest OS is Peppermint Ice (Ubuntu based) Host OS is Windows XP VirtualBox as virtualization software I realize this is somewhat breaking borders between the host and the guest, but I want my pretty rotating wallpaper! I'm guessing there is a way using scripts and shared folders or something similar, if not by means of just querying the host OS.

Read the article

Weird system freeze. Nothing works keyboard/mouse/reset button - Ubuntu 12.04 64bits [closed]

- by Simon

I have fresh PC: i5 3570K with Intel 4000 onboard ASrock Z77 Extreme4-m 8GG RAM - Adata 1333Mhz... 1TB Seagate drive 7200rpm I've also fresh systems - Ubuntu/Win7 and today there was something strange. Ubuntu twice just freezed. Everything stopped, even keyboard and mouse wasn't responding. Even RESET button didn't work. Right now memtest is running, but I'd like to know, where else can i look for cause. Can it be software fault if even reset isn't working? Only long reset pressing rebooted PC... I'm a bit confused. Or should I test components - CPU, motherboard, disk. Which logs in Ubuntu should I check to diagnose cause? EHm I had few adventures with this PC already. Shipped motherboard was broken (ASrock Z68 Extreme3) and had old bios, so I had to contact with reseller, replace it and at the end decided on Z77, but everything took 3 weeks, so I have bad feelings... Edit: Both freezes were during editing something in gedit (it can be coincidence) and after few updates today - when memtest is end I'll check what was updated

Read the article

Program (or perhaps built-in feature of Windows 7) to change wallpaper depending on screen resolution?

- by Lasse V. Karlsen

I have a laptop with a resolution of 1680x1050. At work I use 2x 1280x1024 monitors, and sometimes I present using a projector that is 1024x768. My wallpaper, that I made for 1680x1050, looks awful on the other resolutions. Is there anything I can do that would make Windows 7 switch to a different wallpaper that has been cropped appropriately? ie. can I give Windows more than one wallpaper, with different resolutions, and have Windows 7 switch automatically to a matching one? If there is a free (or relatively cheap) piece of software I could download and install that would fix it, that would be OK too.

Read the article

IRQ Conflicts Causing Video Card and Boot Problems?

- by sanpatricio

tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

Read the article

Remember way back when we had a free decompiler?

- by Justin Jones

I, like probably so many of the rest of you, was mortified when Reflector was sold to RedGate. I knew where it was going. Suddenly you had to install it instead of just download and run it. I had a deep down feeling that one of the most useful tools in my arsenal was about to become a corporate product and no longer belong to the world of free tools. Sure enough it did. For a while now I’ve limped by without my favorite decompiler. This was made a little easier by the fact that you can now debug into the .net framework, but I still missed Reflector. JetBrains, makers of the superawesome and well worth the cost ReSharper (no it’s not free) have made their own decompiler that is comparable with Reflector, and it’s free. It’s still a corporate product, and JetBrains isn’t exactly known for making free software, but for now we have an option back on the table until some other industrious developer makes the next Reflector. dotPeek can be downloaded here. http://www.jetbrains.com/decompiler/

Read the article

CLR and C# Learning Materials

- by Gerry O'Brien

Have you ever found that one book or resource that just brings it all home? Seriously. These are rare finds when you read the content and all the stars seem to align, you have those "Ah ha!" moments. Well, I have found that book and it is CLR via C#, Third Edition by Jeffrey Richter. If you're not familiar with Wintellect, look them up. This book is published by Microsoft Press and is the third edition of this title. I'm in chapter 5 at the moment and already I have a better understanding of the CLR and how things work. I'm a former Visual Basic MVP and C# is a language I learned as a result of projects I worked on at a software development company a few years ago. Like a lot of VB programmers, I never went deep into the workings of the "behind the scenes" aspects and just focused on the applications. My next possible career move involves a deeper knowledge of the CLR and a .NET language. This book is one that I will have my bookshelf for reference long after I have read that last page. Gerry

Read the article

Low Graphics and laggy screen after update to 13.10 from 13.04

- by Wh0RU

After updating from 13.04 to 13.10 many of 3D unity stuff has stopped working, I am suing Samsung Series 3 (NP350V5X) Laptop which has Switchable Intel and AMD Radeon HD 7670M GFX. xserver-xorg-video-ati does works but NO 3D support and graphics are very low. [I am currently using this] fglrx & fglrx-updates shows blank screen after Login. Intel Graphic Install doesn't work either (dependency error) Output of $ sudo lshw -c video *-display description: VGA compatible controller product: Thames [Radeon HD 7500M/7600M Series] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:45 memory:e0000000-efffffff memory:c0120000-c013ffff ioport:3000(size=256) memory:c0100000-c011ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:bfc00000-bfffffff memory:d0000000-dfffffff ioport:4000(size=64) Similarly $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits) OpenGL version string: 2.1 Mesa 9.2.1 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Shows no 3D support. Can anyone please guide how to make things working again.

Read the article

Why is purchasing Microsoft licences such a daunting task? [closed]

- by John Nevermore

I've spent 2 frustrating days jumping through hoops and browsing through different local e-shops for VS (Visual Studio) 2010 Pro. And WHS (Windows Home Server) FPP 2011 licenses. I found jack .. - or to be more precise, the closest I found in my country was WHS OEM 2011 licenses after multiple emails sent to individuals found on Microsoft partners page. Question being, why is it so difficult to get your hands on Microsoft licenses as an individual? Sure, you can get the latest end user operating systems from most shops, but when it comes to development tools or server software you are left dry. And companies that do sell licenses most of the time don't even put up pricing or a self service environment for buying the licenses, you need to have an hawk's eye for that shiny little Microsoft partner logo and spam through bunch of emails not knowing, if you can count on them to get the license or not. Sure, i could whip out my credit card and buy the VS 2010 license on the online Microsoft Shop. Well whippideegoddamndoo, they sell that, but they don't sell WHS 11 licenses. Why does a company make it so hard to buy their products? Let's not even talk about the licensing itself being a pain.

Read the article

JavaOne LAD Call for Papers

- by Tori Wieldt

JavaOne LAD Call for Papers closes next Friday, October 4. Here are Java Evangelist Steven Chin's top three reasons why you submit a session:1) Imagine a parallel world where Java is king. Where the government has mandated that all software be open-source and recognized Java as an official platform. That is exactly what happened in Brazil and it shows in all aspects of their country from government systems to TV standards.2) A JUG in Every Village - Brazil has the most user groups of any country in the world by a significant margin. "I've stayed after JavaOne to visit several cities and gotten a great audience whether it was a large city like Brasilia or Goiania, or a coastal town like Fortaleza, Salvador, or Maceio," Chin explains.3) A Community-Supported Conference - SouJava and the entire Brazilian user group community is active and involved with JavaOne Brazil, making it a really engaging regional JavaOne conference. Submissions should be: From the community, all proposals should be non-Oracle. Java-related topics (not technologies such as Flex, .NET, Objective C, etc... unless it's specifically a topic about how such things INTEGRATE with Java) Non-product pitches Interesting/innovative uses of Java Practical relevant case studies/examples/practices/etc. The call for papers will close on Friday, October 4, 2012 at 11:59 pm local time. We look forward to hearing from you!

Read the article

Is ZeroMQ a good choice to make a Python app and a C# managed assembly work together?

- by Alex Bausk

I have a task that involves talking to a .NET-based API (namely AutoCAD) to retrieve data, send commands, and react to events. I want to separate the API operations and the proper program logic (largely already implemented in Python) by using natural tools for both: a C# DLL for the former and a Python app for the latter. To connect these two pieces, I began exchanging JSON in ZeroMQ messages. I'm at early development stages but having recently discovered that ZeroMQ does not guarantee message delivery/order, I have reservations about whether this is a feasible way to go. Right now my app is a very basic REQ/REP pair and I plan to handle reacting to events and executing different commands by adding some sort of 'recipient-function' field to my message format. The reason that I want to use ZMQ is that I might be able to scale the software into a larger, multi-user, distributed solution sometime. I am a lay programmer so I would ask for your advice about this architecture. Should I just go ahead with it and plan to deal with message reliability/ordering when problems appear? Should I consider developing some kind of a REST wrapper around ZMQ?

Read the article

Trendnet tew-424ub wireless not working after update 12.10

- by dwa

I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

Read the article

what languages are good selling points on resume? [closed]

- by Thomas Galvin

I have a good amount of experience with C# and Java at the moment but after education and whatnot I wish to be able in more than just 2 high-level, comparatively limited languages, and from what I've seen languages like C(++) or PHP are in demand at the moment. I've thought about learning the following: C. Very standard, lightweight and available on everything. However very old and mostly procedural. C++. Standard like C but I've read in some places that it encourages bad programming design and use of dodgy libraries - but similar things have been said about C too so I'll take that with a grain of salt. D. Quite new but looks promising, but will it be relevant or applicable in the future though? PHP. With the internet becoming ever more important I think this might be the one to go with, but the code itself isn't very intuitive. CoffeeScript (or plain JavaScript). With Microsoft's new idea of HTML5+JS for everything under the sun this doesn't look like a bad choice. However things do change and I wish to be primarily a software dev, not web dev. So out of the above list, or any others that you could suggest, what would you say I should begin to focus on? What is your opinion on staying with C#?

Read the article

Vacation scheduler/viewer

- by Norfeldt

I'm looking for a solution that allows multiple persons to put plan and notify their vacation by putting it in their electronic calendar and invite a dedicated "robot" email. On the other side I should be able to get a quick overview of the vacation for each person and do a print out that allows me to put it on a board. Example: John puts his winter vacation for week 7 into his calendar and invite [email protected]. Ben does the same thing for week 4 and 5 and invites [email protected]. Dilbert host the [email protected] and prints out and overview for the next 3 months. Each person's vacation is either stated by name or/and color on the print out. I would like to do the thing with standard business software like Outlook 2010 without installing too many softwares. But at the same time it should be easy and quick to make the print outs without too much fiddling Am I dreaming ?

Read the article

How to reliably synchronise file servers between London and Shanghai?

- by Andy S

We have two offices, one in London and one in Shanghai, each needing to be able to access the same set of files. This means we need a solid, speedy means of synchronising a set of folders between servers at either office. They're likely to be Windows servers, but we could look at Linux boxes if the software side makes more sense on *nix. We've considered Rsync, Unison, Gluster, and a few other options, but none of them seem capable of reliably keeping the servers in sync between such distant office locations. Each office is on DSL connectivity over the open internet, so encryption is also a factor. Does anyone have any hints for getting the servers synchronising in as close to real time as possible, without dying constantly? Andy

Read the article

Filtering serial port io

- by mr odus

I am currently working on a project where I communicate with hardware via a com port on its respective pc(win xp or 7) It is a fairly large project and sifting through the log file can be a bit of pain. This is my current setup. I use putty to do the actual serial communication, and write it to a log file. Then using MinGW Msys I filter it using tail -f "puttyLog" | grep -i "search term" Is there a better way to do this? I mean specifically filtering the input in realtime. Not that mine is terrible, but it still involves having to read from a log and sometimes there have been hangups where it will be delayed for a minute or 2. I have used software in the past with a main io window and then internal filter panels, but can no longer remember or find it.

Read the article

Workflow: suggest a versioning and file control for Designer and Developer

- by Pennf0lio

Our company are having hard time managing project files and managing versions of PSD, HTML, PHP, and CSS files. Can anyone recommend a good software or workflow to handle files and versions. Here's my common scenario: I work for a project in my computer, it could be a Website mockup or a coding project. I then save all the files locally in my workstation. I'll then upload all the project files in the server connected in our network to have a backup. In my files, I usually append a "r1" for revisions, like "WebsiteMockup_r1" or "WebsiteMockup_r2". I need somehow to synchronize all my local files to the server and have some versions options.

Read the article

Translating Documents from a Foreign Language into English on my Computer?

- by Simon

I am aware that websites can be translated from many languages into English thanks to Google Translate. If I receive documentation via email that is in a language other than English, how straight forward is it to translate into English on my PC or Apple Mac? (indeed is Google Translate involved or is it strictly for websites) Similarly if I receive documentation via the normal postal mail service (termed "snail mail" if I'm correct) which needs to be translated into English, what steps need to be taken for this documentation to be translated effectively & quickly on my PC or Apple Mac (I am aware of the term Optical Character Recognition (OCR) software, and is this costly, or do free alternatives exist to carry out the translation process solely online? ).

Read the article

GeForce and Radeon: what is present condition of opensource and proprietary drivers?

- by Septagram

So, it'm about to buy a fresh videocard. Since I do most of my stuff on Linux, I wonder how well will either videocard perform. I recently had a good experience with GeForce 6600 with proprietary drivers and a less than satisfactory experience with Radeon 9000 a while ago. From my experience, proprietary drivers for GeForce used to work very well, while proprietary drivers for Radeon failed miserably. And opensource drivers were sloooow. A few months ago I found out that ATI opened their specifications, and a work on fully featured opensource driver is in progress. I prefer to use free software whenever possible, with the exception of games, so, if that driver is fast enough, feature-rich enough and reliable enough I'd very much like to try it out. I wish I could say that if I can just to basic things, like watch video, heavily use compiz and work with simple applications, this may be enough. I do most of my gaming under Windows anyway. However, there is a good chance I'll go into indie game development in a few months fulltime, so it should also be able to run not-so-very-demanding games (say Nexuiz). But if it isn't, I'd like to know, what to expect from proprietary drivers. Do recent proprietary drivers from NVIDIA and ATI work well? Are ATI drivers just as easy to install on Ubuntu as are NVIDIA drivers?

Read the article

In Windows XP, is it possible to disable user credential caching for particular users

- by kdt

I understand that when windows caches user credentials, these can sometimes be used by malicious parties to access other machines once a machine containing cached credentials is compromised, a method known as "pass the hash"[1]. For this reason I would like to get control over what's cached to reduce the risk of cached credentials being used maliciously. It is possible to prevent all caching by zeroing HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\CachedLogonsCount, but this is too indiscriminate: laptops users need to be able to login when away from the network. What I would like to do is prevent the caching of credentials of certain users, such as administrators -- is there any way to do that in Windows XP? http://www.lbl.gov/cyber/systems/pass-the-hash.html

Read the article

Ubuntu running like mud, system hangs and looks like its running at 3FPS

- by user240803

the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

Read the article

users unable to add registry keys to HKCU

- by Eds

I may not have this 100% correct so need some clarification. Are normal users on a 2003 terminal server allowed to add registry keys the their own HKCU section in the registry, or are they only allowed to edit existing ones? The reason I ask is that we have 3 keys that we need to add for each user on login. I thought it would be as simple as having a straightforward batchscript run that silently adds the keys for the user. Here is what I used: regedit.exe "C:\Documents and Settings\All Users\Desktop\example.reg" When the user runs this batch scipt, they see nothing as you would expect, but the keys are not added. If I simply run the .reg file as the user, it asks if I want to add the key, but then has an error saying there was an error accessing the registry. Do I need something a bit more complex to accomplish this task. Many Thanks Eds EDIT: Contents of .reg file Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\outlook\Security] "PromptSimpleMAPINameResolve"=dword:00000002 "PromptSimpleMAPIOpenMessage"=dword:00000002 "PromptSimpleMAPISend"=dword:00000002

Read the article

What is a preferred method for automatically configuring and setting up an Ubuntu instance?

- by sutch

I am tired of manually configuring instances of Ubuntu for testing web applications and for setting up workstations. I'm even more frustrated by the issues caused by inconsistent configurations. Is there a method (hopefully not too time consuming to learn and setup) that allows for automation of the setup and configuration of an Ubuntu server or workstation from an ISO. This is primarily for virtual machine instances, but it would be helpful to also create instances on hardware. I am specifically looking for a method to automate the installation of libraries (apt-get), configure services (such as Apache and MySQL), add 3rd party software (download, extract and build), and add libraries to scripting languages (for example, Ruby Gems or CPAN packages for Perl).

Read the article

Can a named (bind) crash make a server unreachable?

- by giorgio79

My server recently became unreachable, and after restart a named error was the last line I found in /var/log/messages before restart: Jun 26 00:15:06 host named[1303]: error (network unreachable) resolving 'dlv.isc.org/DNSKEY/IN': 2001:500:71::29#53 Jun 26 06:38:55 host kernel: imklog 5.8.10, log source = /proc/kmsg started. Jun 26 06:38:55 host rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1294" x-info="http://www.rsyslog.com"] start Jun 26 06:38:55 host kernel: Initializing cgroup subsys cpuset Can a named crash make a server unreachable? I doubt it, as I assume I should still be able to login with ssh via IP, but the server did not respond...So, I am trying to make heavy guesses here.

Read the article

error 0x80070522. not able to create a file in c:\ directory

- by Abbas

Hello Everybody... "error 0x80070522. not able to create a file in c:\ directory" One of our customers has just found a problem when trying to create a file on the root of the C:\ Drive, on a Windows 7 Professional PC. I know they shouln't be keeping files here, but there is a valid reason in this case, so I've relaxed the security on the root of C:\ by giving the group 'users' modify permission. Before I relaxed the security, the user was receiving 'access denied', but now they are receiving the message: An unexpected error is keeping you from creating the file. If you continue to recieve this error, you can use the error code to search for help with this problem. Error 0x80070522: A required priviledge is not held by the client. Googling for this suggests that it is caused by UAC, but how can I get round this when the user doesn't have admin rights on their PC? So did you find a solution for this issue ?? Please its urgent to my accountant software..

Search Results

Search found 22301 results on 893 pages for 'software sources'.

Page 665/893 | < Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672 | Next Page >

- by Jeff

- by Simon

- by Lasse V. Karlsen

- by sanpatricio

- by Justin Jones

- by Gerry O'Brien

- by Wh0RU

- by John Nevermore

- by Tori Wieldt

- by Alex Bausk

- by dwa

- by Thomas Galvin

- by Norfeldt

- by Andy S

- by mr odus

- by Pennf0lio

- by Simon

- by Septagram

- by kdt

- by user240803

- by Eds

- by sutch

- by giorgio79

- by Abbas

- by The Geek

< Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672 | Next Page >