Search Results

Search found 18064 results on 723 pages for 'custom panel'.

Page 667/723 | < Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >

  • Diff 2 files while ignoring parts of lines

    - by Millianz
    I would like to diff a file system. Currently my bash script prints out the file system recursively into a file (ls -l -R) and diffs it with an expected output. An example for a line in this file would be: drw---- 100000f3 00000400 0 ./foo/ My current diff command is diff "$TEMP_LOG" "$DIFF_FILE_OUT" --strip-trailing-cr --changed-group-format='%' --unchanged-group-format='' "$SubLog" As you can see I ignore additional lines in the current output file, I only care about lines that match with the master output. I now have the problem though that some files may differ in size, or a folder might even have a different name, but due to it's location I know what access rights it should have. For example: Output: ------- 00000000 00000000 528 ./foo/bar.txt Master: ------- 00000000 00000000 200 ./foo/bar.txt Only the size differs here, and it doesn't matter, I would like to just ignore certain parts of the diff, kind of like an ansi c comment. Master: ------- 00000000 00000000 /*200*/ ./foo/bar.txt -- OR -- Master: d------ 00000000 00000000 /*10*/ ./foo//*123123*///*76456546*//bar.txt Output: d------ 00000000 00000000 0 ./foo/asd/sdf/bar.txt And still have it diff correctly. Is this even possible with diff, or will I have to write a custom script for it? Since I'm fairly new to cygwin I might be using the completely wrong tool all together, I'm happy for any suggestions. Update: Taking a step back, here is the general task at hand that I want to achieve. I want to write a script that checks the file system to see if the read/write permissions are set up correctly. The structure of the file system is under my control, so I don't have to worry about it changing too much. Sometimes folders/files might not be present, but if they are their permissions must be checked. For Example assume that the following is a snapshot of the current file system structure drw ./foo drw ./foo/bar -rw ./foow/bar/bar.txt drw ./foo/baz -rw ./foo/baz/baz.txt And this is what the file system structure might dictate, i.e. if these folders / files are present, the permissions must match. drw ./foo drw ./foo/bar -rw ./foo/bar/bar.txt --- ./foo/bar/foobar.txt drw ./foo/baz -rw ./foo/baz/foobaz.txt In this case the file system checked out ok, since all files present match their expected values. The situation becomes more complicated as soon as certain folders might have any arbitrary name, only due to their location I know what their permissions should be. Assume that the directory ./foo/bar in the above example might be such a case, i.e. instead of bar the folder could have any name, but still match the -rw permissions. This seems like a very complicated situation, and I'm not even sure if I can solve it with bash scripting alone. I might have to write an actual application.

    Read the article

  • Apache returns 403 Forbidden for alternative port vhost

    - by Wesley
    I'm having an issue getting vhosts to work on Apache 2.2, Debian 6. I have two VirtualHosts, one on port 80 and one on port 8888. The port 80 one has been created automatically by DirectAdmin, the 8888 is a custom one. It's configuration is as follows. <VirtualHost *:8888 > DocumentRoot /home/user/public_html/development ServerName www.myserver.nl ServerAlias myserver.nl <Directory "/home/user/public_html/development"> Options +Indexes +FollowSymLinks +MultiViews AllowOverride All Order Allow,deny Allow from all </Directory> </VirtualHost> Of course I also have a NameVirtualHost *:8888 The port 80 DocumentRoot is /home/user/public_html/production, which is perfectly accessible and works like a charm. The port 8888 docroot of /home/user/public_html/development is 403 forbidden though. I have compared the permissions for both folders. They seem fine to me. drwxr-xr-x 2 root root 4096 Aug 17 16:14 development drwxr-xr-x 4 root root 4096 Aug 18 04:29 production Also, the index.php file which is supposed to display when accessing through port 8888, located in /development/: -rwxr-xr-x 1 root root 41 Aug 17 16:14 index.html I have looked at my error_log and found many of the following entries, only being added to the log file when accessing through port 8888. [Sat Aug 18 04:35:09 2012] [error] [client 27.32.156.232] Symbolic link not allowed or link target not accessible: /home/user/public_html /home/user/public_html is a symbolic link that refers to /home/user/domains/mydomain/public_html. The symbolic link has the following permissions: lrwxrwxrwx 1 admin admin 29 Aug 17 15:56 public_html -> ./domains/mydomain/public_html I'm at a loss. It seems that everything is readable or executable. I've set the Directory to FollowSymLinks in the httpd.conf file, but that doesn't seem to make a difference. If I change that directory tag to <Directory "/home/admin/public_html"> (so it has FollowSymLinks on that as well) it still does not work. Any help is greatly appreciated. If I need to post more information, let me know. I'm pretty much a beginner at this stuff. .. .. UPDATE: I ended up changing the configuration to directly go to the actual path of the files, avoiding the public_html symlink altogether. That worked. Thanks for the suggestions folks. DocumentRoot /home/user/domains/mydomain/public_html/development instead of DocumentRoot /home/user/public_html/development

    Read the article

  • recommendations for efficient offsite remote backup solution of vm's

    - by senorsmile
    I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

    Read the article

  • Google analytics and multiple independent subdomains

    - by MTilsted
    I need some help trying to setup google analytics correct. Here is my setup: We host sites for multiple customers, and each customer have their own subdomain on our site. So we have customerA.oursite.com and customerB.oursite.com As we add more customers we get more subdomains. We do want to track all data for each customer independent, but I don't want to to create a new google tracking code for each new customer. So my plan is to track all visits with "oursite.com", and then I will create a filter in google Analytics to get data for each specific customer(All visits for a specific subdomain). Is this(One tracking code, and a subdomain filter) the right way to do it? To create a subdomain filter i add a new profile for each customer, and then add a custom filter saying include "Request URI" and fill in "CustomerDomain.oursite.com". Is this the correct way to do it? And a general question about filters: Is it really impossible to create a new filter by applying it to data in an existing profile? I would really like to just collect all the data in one "main" profile and then create subdomain filters as we need them. But it seems that google only apply filters to new incomming data, not existing data. Is this really true? The following is my tracking code. Is '_setDomainName','none' the right thing to do? <script type="text/javascript"> /* Tracking code for qrtown.com */ var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-11584298-10']); _gaq.push(['_setDomainName', 'none']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script>

    Read the article

  • MySQL reserves too much RAM

    - by Buddy
    I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

    Read the article

  • Set up lnux box for hosting a-z [apache mysql php ssl]

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP: To upgrade PHP to the latest version, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! cd /tmp #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm #rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm #rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. [will list all packages available in the IUS repo] rpm -qa | grep php [will list installed packages needed to be removed. the installed packages need to be removed before you can install the IUS packages otherwise there will be conflicts] #yum shell >remove php-gd php-cli php-odbc php-mbstring php-pdo php php-xml php-common php-ldap php-mysql php-imap Setting up Remove Process >install php53 php53-mcrypt php53-mysql php53-cli php53-common php53-ldap php53-imap php53-devel >transaction solve >transaction run Leaving Shell #php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) This process removes the old version of PHP and installs the latest. To upgrade mysql: Pretty much the same process as above with PHP #/etc/init.d/mysqld stop [OK] rpm -qa | grep mysql [installed mysql packages] #yum shell >remove mysql mysql-server Setting up Remove Process >install mysql51 mysql51-server mysql51-devel >transaction solve >transaction run Leaving Shell #service mysqld start [OK] #mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure Virtualhosts for SSL, setting up a CA, setting up SFTP with openSSH, or anything else would be appreciated.

    Read the article

  • Hosed Windows 7 permissons

    - by Anthony
    Here is the most interesting thing I've noticed since the problems started: If I go into a control panel/system module (in this case the Resource Monitor) that has a "Check Online" type option, Firefox (my default browser) opens right up without a problem. But if I just start Firefox from any shortcuts (start menu, desktop, etc), the Firefox process starts up (and the start menu icon starts glowing) only to end without notice a few seconds later. Possibly related: If I start up in Safe-Mode (w/o Networking, but haven't tried with yet), I can start up FF or Chrome just fine, but if I attempt to open Chrome normally, I get a permissions error. Opera and Safari seem to be okay (mostly). Safari crashes when I try to download any files. All of the above leads me to believe that some (but clearly not all) core files have messed up permissions. Or rather, that I no longer have permission. System still does, based on Firefox opening without fail when the system initiates it. I've run MS Forefront once in normal mode, Malwarebytes twice in normal mode and once in safe-mode. One trojan found and deleted, but the problem persists. Two other things worth mentioning: I accidentally duplicated my library... I thought I'd try to add the "Internet" folder to my start menu, next to music and downloads. The first advanced thing I tried was "create new library". I clearly misunderstood what this means. I thought it was a way to add virtual folders to the library (which I thought, in turn, would allow me to choose it as a link on the start menu), but instead it recreated my already existing user folder, AppData and all. I didn't notice this until today. Then I tried setting permissions for my User folder to full control, recursively... Confused but not giving up,I thought I could maybe create a shortcut to the NetHood folder manually, but instead got hit with an access denied error. So I tried to change the permission levels for all sub-folders to my user folder so that I had full control. I got several access denied errors along the way. At this point I gave up, went out, ended up caught in the rain and stuck on a friend's couch and showing up late for work the next day. Thanks for nothing, Microsoft. When I finally got home today (20 hours later), I noticed that Firefox was acting really strange. I tried opening Chrome to see if the problem was client side or server side, and instead got the above-mentioned "you don't have permission to open this program" alert. And I think that's the whole story. Oh, I also did a system restore, but not chose a point from this morning (an auto update), and it worked but the problem wasn't fixed. And then all the earlier restore points were gone. So the questions are: a) is there a way to set the admin and user privs back to "default"? b) would this, in anyone's expert opinion, fix the problems I'm having? c) how come being logged in as an admin isn't the same as being logged in with admin privs? It seems that half the time I have to do run as admin for fairy standard things because i'm being treated as me-theuser and not me-theadmin. Thanks for reading.

    Read the article

  • How to flip video feed that's presented upside down?

    - by Zuul
    Skype an other applications running under windows 7 Ultimate are presenting the video captured from the laptop built-in webcam upside down. I've tried many solution that I was able to find regarding issues like this, but to no avail. Some of the most relevant are discussed here: From Skype Support Network, the thread why is my video image of myself upside-down??? From ASUSTek Forums, the thread Built-in camera upside down Both present several potential solutions to this issue, but I've been unable to fix it for the laptop ASUS U6S. What I've already tried: Changing Drivers The driver that works must be the one from Windows, all others available from ASUS drivers either don't install or install but the webcam doesn't provide any video feed. This disallows all options that concern using an older driver or editing the .inf file as to manually adjust the settings. ASUS does not provide drivers for Windows 7, so I've used drivers from Windows Vista 32 Bit. Using the application manycam This application actually solves the issue (temporarily), but creates new ones: If I use the application to flip the video feed, Skype video call cease to work. This application doesn't save the settings, at least I wasn't able to find any way to save the settings I've used to flip the video feed. A computer restart brings all back to how it was, video feed upside down and if the application is still installed, Skype continues to fail on video calls. Regedit I've searched thru Windows Registry Editor as to find any reference to the webcam settings, hopping to find a key with the Flip parameter, since it's up to the driver to flip the image (by what I could ascertain from this problem). Couldn't find any reference to such settings, either they actually don't exist within the Windows Registry or they use some weird name that I could think off. System Configuration I was able to access the webcam system settings from the Windows Device Manager, but the tab that actually has the Image Rotation setting is always disabled. The same goes for the settings available from the Skype webcam options (that essentially is presenting the same settings as Windows Device Manager, just within a custom Skype pop-up). Question: How can I flip the video feed from the laptop's built-in webcam, as to properly see and broadcast the video?

    Read the article

  • VPN Connection Causes Internal LAN Connection Loss with Server

    - by sleepisfortheweak
    I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

    Read the article

  • How does an NTP host switch among the various modes?

    - by James A. Rosen
    The NTPv3 RFC describes five operating modes: Symmetric Active (1): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of its peer. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer. Symmetric Passive (2): This type of association is ordinarily created upon arrival of a message from a peer operating in the symmetric active mode and persists only as long as the peer is reachable and operating at a stratum level less than or equal to the host; otherwise, the association is dissolved. However, the association will always persist until at least one message has been sent in reply. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer. Client (3): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of its peer. By operating in this mode the host, usually a LAN workstation, announces its willingness to be synchronized by, but not to synchronize the peer. Server (4): This type of association is ordinarily created upon arrival of a client request message and exists only in order to reply to that request, after which the association is dissolved. By operating in this mode the host, usually a LAN time server, announces its willingness to synchronize, but not to be synchronized by the peer. Broadcast (5): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of the peers. By operating in this mode the host, usually a LAN time server operating on a high-speed broadcast medium, announces its willingness to synchronize all of the peers, but not to be synchronized by any of them. It seems to me, though, that any host except a leaf node would probably be in several modes. For example, I might have a local area network with three NTP servers, each in Symmetric Active (1) mode with respect to one another. They would also each be clients (3) of one of the many public stratum two time servers. Lastly, they would all server as servers (4) to the many local clients. Is the point that they're only in a given mode for a moment during the synchronization? If so, how does a host know to switch? I'm only looking for enough depth here to discuss the issue in an educated manner, not to write a custom time server.

    Read the article

  • How should we serve files in a small bioinformatics cluster?

    - by cespinoza
    We have a small cluster of six ubuntu servers. We run bioinformatics analyses on these clusters. Each analysis takes about 24 hours to complete, each core i7 server can handle 2 at a time, takes as input about 5GB data and outputs about 10-25GB of data. We run dozens of these a week. The software is a hodgepodge of custom perl scripts and 3rd party sequence alignment software written in C/C++. Currently, files are served from two of the compute nodes (yes, we're using compute nodes as file servers)-- each node has 5 1TB sata drives mounted separately (no raid) and is pooled via glusterfs 2.0.1. They each have as 3 bonded intel ethernet pci gigabit ethernet cards, attached to a d-link DGS-1224T switch ($300 24 port consumer-level). We are not currently using jumbo frames (not sure why, actually). The two file-serving compute nodes are then mirrored via glusterfs. Each of the four other nodes mounts the files via glusterfs. The files are all large (4gb+), and are stored as bare files (no database/etc) if that matters. As you can imagine, this is a bit of a mess that grew organically without forethought and we want to improve it now that we're running out of space. Our analyses are I/O intensive and it is a bottle neck-- we're only getting 140mB/sec between the two fileservers, maybe 50mb/sec from the clients (which only have single NICs). We have a flexible budget which I can probably get up $5k or so. How should we spend our budget? We need at least 10TB of storage fast enough to serve all nodes. How fast/big does the cpu/memory of such a file server have to be? Should we use NFS, ATA over Ethernet, iSCSI, Glusterfs, or something else? Should we buy two or more servers and create some sort of storage cluster, or is 1 server enough for such a small number of nodes? Should we invest in faster NICs (say, PCI-express cards with multiple connectors)? The switch? Should we use raid, if so, hardware or software? and which raid (5, 6, 10, etc)? Any ideas appreciated. We're biologists, not IT gurus.

    Read the article

  • Why would a process monitoring script use exit 1; on finding no problems?

    - by user568458
    General question: On a Linux (Centos) server, if a process monitoring script run by cron is set to close with exit 1; rather than exit 0; on finding that everything is okay and that no action is needed, is that a mistake? Or are there legitimate reasons for calling exit 1; instead of exit 0; on the "Everything's fine, no action needed" condition? exit 0; on finding no problems seems to me to be more appropriate. But maybe there's something I'm not aware of. For example, maybe there's something specific to Cron? Or maybe there's a convention in process monitoring scripts that 'failure' means 'this script failed to need to fix a problem' (rather than what I would expect which is that exit 1; would mean 'the process being monitored has failed'?) My specific case: I'm looking at a process monitoring script written by my web hosting company. By process monitoring script, I mean a script executed by Cron on a regular basis that checks if an important system process is running, and if it isn't running, takes actions such as mailing an administrator or restarting the process. Here's the (generalised) structure of their script, for a service running on port 8080 (in this case, Apache Tomcat): SERVICE=$(/usr/sbin/lsof -i tcp:8080 | wc -l); if [ $SERVICE != 0 ]; then exit 1; else #take action fi Seems simple enough even for someone with limited knowledge like me, except the exit 1; part seems odd. As I understand it, exit 0; closes a program and signifies to the parent that executed the program that everything is fine, exit n; where n0 and n<127 signifies that there has been some kind of error or problem. Here, their script seems to go against that rule - it calls exit 1; in the condition where everything is fine, and doesn't exit after taking remedial action in the problem condition. To me, this looks like a mistake - but my experience in this area is limited. Are there cases where calling exit 1; in the "Everything's fine, no action needed" condition is more appropriate than calling exit 0;? Or is it a mistake? Wider context is pretty simple. It's a Centos VPS, running Plesk. The script is being called by Cron via Plesk's "Scheduled tasks" Cron manager. There's no custom layer between Cron and this script that would respond in an unusual way to the exit call. It's a fairly average, almost out-of-the box Plesk-managed Centos VPS (in so far as there is such a thing). The process being monitored by this script is Apache Tomcat.

    Read the article

  • Tips for maximizing Nginx requests/sec?

    - by linkedlinked
    I'm building an analytics package, and project requirements state that I need to support 1 billion hits per day. Yep, "billion". In other words, no less than 12,000 hits per second sustained, and preferably some room to burst. I know I'll need multiple servers for this, but I'm trying to get maximum performance out of each node before "throwing more hardware at it". Right now, I have the hits-tracking portion completed, and well optimized. I pretty much just save the requests straight into Redis (for later processing with Hadoop). The application is Python/Django with a gunicorn for the gateway. My 2GB Ubuntu 10.04 Rackspace server (not a production machine) can serve about 1200 static files per second (benchmarked using Apache AB against a single static asset). To compare, if I swap out the static file link with my tracking link, I still get about 600 requests per second -- I think this means my tracker is well optimized, because it's only a factor of 2 slower than serving static assets. However, when I benchmark with millions of hits, I notice a few things -- No disk usage -- this is expected, because I've turned off all Nginx logs, and my custom code doesn't do anything but save the request details into Redis. Non-constant memory usage -- Presumably due to Redis' memory managing, my memory usage will gradually climb up and then drop back down, but it's never once been my bottleneck. System load hovers around 2-4, the system is still responsive during even my heaviest benchmarks, and I can still manually view http://mysite.com/tracking/pixel with little visible delay while my (other) server performs 600 requests per second. If I run a short test, say 50,000 hits (takes about 2m), I get a steady, reliable 600 requests per second. If I run a longer test (tried up to 3.5m so far), my r/s degrades to about 250. My questions -- a. Does it look like I'm maxing out this server yet? Is 1,200/s static files nginx performance comparable to what others have experienced? b. Are there common nginx tunings for such high-volume applications? I have worker threads set to 64, and gunicorn worker threads set to 8, but tweaking these values doesn't seem to help or harm me much. c. Are there any linux-level settings that could be limiting my incoming connections? d. What could cause my performance to degrade to 250r/s on long-running tests? Again, the memory is not maxing out during these tests, and HDD use is nil. Thanks in advance, all :)

    Read the article

  • Remote Debian System Preventing Logon

    - by choobablue
    I have a dozen or so single board computers on a network running Debian (squeeze) and access them via ssh (ssh server is dropbear). To give an idea of the hardware of these computers they're 1.2 GHz x86 processors, 1GB of RAM and 4GB flash drives formatted as ext2 (I avoided ext3 to prevent the added flash write stress from journaling), there is also a swap partition on the drive. Normally the setup I'm using works great and I can access all the computers. Every once in a while one will prevent access. What happens is I try to connect via ssh (putty) and it gives me the login prompt, I enter the username and password and it responds 'Access Denied' and it will also refuse any public key in ~/.ssh/authorized_keys. The credentials are correct as they worked previously. The computer responds to pings and putty recognizes the server public key, which implies to me the system is still running. Restarting the server fixes the problem and I can log in again. (I tried a temporary fix of putting shutdown -r now in the root crontab but this doesn't seem to reliably be run once the hang happens) Once I restart however there doesn't seem to be any information in any of the system logs to indicate what happened, the logs are simply empty for that time period, as if the system had crashed. There is some custom software running on the system which appears to stop working (which is why I wanted to ssh to begin with). I'm assuming that this program is the source of the problems but I'm unsure of how it would cause it and how to debug what is happening. The most likely explanation I can think of is that there is a memory leak in the other program that then prevents dropbear from spawning a new login shell (and crontab from executing shutdown) as there is not enough free memory. But looking at memory usage of the other (working) computers there doesn't seem to be any meaningful increase in memory to indicate a leak (unless it's a very big, fast acting and rare leak). I would think that when the OS ran out of memory it would restart the system or kill processes (the Linux kernel restarts right?). The other thing I wonder about is if the fact that they are running off a flash drive could have some effect, especially the swap partition (which I think I should remove to prevent wear of the flash), but the flash drives are young (~1 month) and I don't think that wear would be a factor yet. Does anybody have an idea of what could cause these symptoms, if it could be done by a memory leak, or something else I haven't thought of. And does anybody know of a method to try to debug the problem and find out more information about what's going wrong?

    Read the article

  • Silverlight and Unexpected Font Sizes

    - by Eric J.
    Someone please teach me to fish here... I'm just learning Silverlight and have ran into a few situations where the font size actually used is drastically different than I would expect. There's probably something conceptual that I'm missing. Case A In one instance, I have defined a user control that presents a Label to show text. If one clicks on the label, the label (that is in a stack panel, in the user control) is replaced with a TextBox. When used at the top of a page (as in the example below with lblName) the label text is very small (around 8 points). When clicked on, the text box that replaces the label uses the specified fonts size. That same user control, used in different parts of the app, uses the same font for Label and TextBox. <Grid x:Name="LayoutRoot" Background="White"> <Grid.RowDefinitions> <RowDefinition Height="33" /> <RowDefinition Height="267*" /> </Grid.RowDefinitions> <StackPanel Height="Auto" HorizontalAlignment="Left" Name="stackPanel" VerticalAlignment="Top" Width="Auto" Grid.Row="1" /> <my:EditLabel Height="33" HorizontalAlignment="Left" x:Name="lblName" VerticalAlignment="Top" Width="Auto" FlexText="{Binding Name, Mode=TwoWay}" FontSize="20" MinHeight="24" /> </Grid> Case B I'm using the LiquidMenu.Menu control to pop up a menu when a button is pressed. The font looks huge compared to the rest of my page (maybe 36 points?). I tried forcing it to a very small by explicitly setting it to 8pt, but that had no effect. <Grid x:Name="LayoutRoot" Background="{x:Null}"> <StackPanel x:Name="labelStackPanel" Orientation="Horizontal"> <TextBlock Height="24" HorizontalAlignment="Left" Name="labelText" VerticalAlignment="Top" Width="200" Text="(Value Goes Here)" /> </StackPanel> <liquidMenu:Menu x:Name="popupMenu" Canvas.Left="40" Canvas.Top="40" ItemSelected="MenuList_ItemSelected" Visibility="Collapsed" Height="Auto" FontSize="8"> <liquidMenu:MenuItem ID="delete" Icon="Images/Delete10.png" Text="Delete" Shortcut="Del" /> <liquidMenu:MenuItem ID="exclusive" Icon="" Text="Exclusive" Shortcut="Ctrl+E" /> <liquidMenu:MenuItem ID="properties" Icon="" Text="Properties" Shortcut="Ctrl+P" /> </liquidMenu:Menu> </Grid> Answers to these specific issues are great, a new way to think about this type of issue so that I understand how to control font size is better.

    Read the article

  • Can I read an Outlook (2003/2007) PST file in C#?

    - by Andy May
    Is it possible to read a .PST file using C#? I would like to do this as a standalone application, not as an Outlook addin (if that is possible). If have seen other SO questions similar to this mention MailNavigator but I am looking to do this programmatically in C#. I have looked at the Microsoft.Office.Interop.Outlook namespace but that appears to be just for Outlook addins. LibPST appears to be able to read PST files, but this is in C (sorry Joel, I didn't learn C before graduating). Any help would be greatly appreciated, thanks! EDIT: Thank you all for the responses! I accepted Matthew Ruston's response as the answer because it ultimately led me to the code I was looking for. Here is a simple example of what I got to work (You will need to add a reference to Microsoft.Office.Interop.Outlook): using System; using System.Collections.Generic; using Microsoft.Office.Interop.Outlook; namespace PSTReader { class Program { static void Main () { try { IEnumerable<MailItem> mailItems = readPst(@"C:\temp\PST\Test.pst", "Test PST"); foreach (MailItem mailItem in mailItems) { Console.WriteLine(mailItem.SenderName + " - " + mailItem.Subject); } } catch (System.Exception ex) { Console.WriteLine(ex.Message); } Console.ReadLine(); } private static IEnumerable<MailItem> readPst(string pstFilePath, string pstName) { List<MailItem> mailItems = new List<MailItem>(); Application app = new Application(); NameSpace outlookNs = app.GetNamespace("MAPI"); // Add PST file (Outlook Data File) to Default Profile outlookNs.AddStore(pstFilePath); MAPIFolder rootFolder = outlookNs.Stores[pstName].GetRootFolder(); // Traverse through all folders in the PST file // TODO: This is not recursive, refactor Folders subFolders = rootFolder.Folders; foreach (Folder folder in subFolders) { Items items = folder.Items; foreach (object item in items) { if (item is MailItem) { MailItem mailItem = item as MailItem; mailItems.Add(mailItem); } } } // Remove PST file from Default Profile outlookNs.RemoveStore(rootFolder); return mailItems; } } } Note: This code assumes that Outlook is installed and already configured for the current user. It uses the Default Profile (you can edit the default profile by going to Mail in the Control Panel). One major improvement on this code would be to create a temporary profile to use instead of the Default, then destroy it once completed.

    Read the article

  • Help with Nicedit - removeFormat function

    - by Franck
    Hello, I'm trying to get around Nicedit, and especially the "removeFormat" function. The problem is I cannot find the "removeFormat" method source code in the code below. The JS syntax looks strange to me. Can someone help me ? /* NicEdit - Micro Inline WYSIWYG * Copyright 2007-2008 Brian Kirchoff * * NicEdit is distributed under the terms of the MIT license * For more information visit http://nicedit.com/ * Do not remove this copyright message */ var bkExtend = function(){ var A = arguments; if (A.length == 1) { A = [this, A[0]] } for (var B in A[1]) { A[0][B] = A[1][B] } return A[0] }; function bkClass(){ } bkClass.prototype.construct = function(){ }; bkClass.extend = function(C){ var A = function(){ if (arguments[0] !== bkClass) { return this.construct.apply(this, arguments) } }; var B = new this(bkClass); bkExtend(B, C); A.prototype = B; A.extend = this.extend; return A }; var bkElement = bkClass.extend({ construct: function(B, A){ if (typeof(B) == "string") { B = (A || document).createElement(B) } B = $BK(B); return B }, appendTo: function(A){ A.appendChild(this); return this }, appendBefore: function(A){ A.parentNode.insertBefore(this, A); return this }, addEvent: function(B, A){ bkLib.addEvent(this, B, A); return this }, setContent: function(A){ this.innerHTML = A; return this }, pos: function(){ var C = curtop = 0; var B = obj = this; if (obj.offsetParent) { do { C += obj.offsetLeft; curtop += obj.offsetTop } while (obj = obj.offsetParent) } var A = (!window.opera) ? parseInt(this.getStyle("border-width") || this.style.border) || 0 : 0; return [C + A, curtop + A + this.offsetHeight] }, noSelect: function(){ bkLib.noSelect(this); return this }, parentTag: function(A){ var B = this; do { if (B && B.nodeName && B.nodeName.toUpperCase() == A) { return B } B = B.parentNode } while (B); return false }, hasClass: function(A){ return this.className.match(new RegExp("(\s|^)nicEdit-" + A + "(\s|$)")) }, addClass: function(A){ if (!this.hasClass(A)) { this.className += " nicEdit-" + A } return this }, removeClass: function(A){ if (this.hasClass(A)) { this.className = this.className.replace(new RegExp("(\s|^)nicEdit-" + A + "(\s|$)"), " ") } return this }, setStyle: function(A){ var B = this.style; for (var C in A) { switch (C) { case "float": B.cssFloat = B.styleFloat = A[C]; break; case "opacity": B.opacity = A[C]; B.filter = "alpha(opacity=" + Math.round(A[C] * 100) + ")"; break; case "className": this.className = A[C]; break; default: B[C] = A[C] } } return this }, getStyle: function(A, C){ var B = (!C) ? document.defaultView : C; if (this.nodeType == 1) { return (B && B.getComputedStyle) ? B.getComputedStyle(this, null).getPropertyValue(A) : this.currentStyle[bkLib.camelize(A)] } }, remove: function(){ this.parentNode.removeChild(this); return this }, setAttributes: function(A){ for (var B in A) { this[B] = A[B] } return this } }); var bkLib = { isMSIE: (navigator.appVersion.indexOf("MSIE") != -1), addEvent: function(C, B, A){ (C.addEventListener) ? C.addEventListener(B, A, false) : C.attachEvent("on" + B, A) }, toArray: function(C){ var B = C.length, A = new Array(B); while (B--) { A[B] = C[B] } return A }, noSelect: function(B){ if (B.setAttribute && B.nodeName.toLowerCase() != "input" && B.nodeName.toLowerCase() != "textarea") { B.setAttribute("unselectable", "on") } for (var A = 0; A < B.childNodes.length; A++) { bkLib.noSelect(B.childNodes[A]) } }, camelize: function(A){ return A.replace(/-(.)/g, function(B, C){ return C.toUpperCase() }) }, inArray: function(A, B){ return (bkLib.search(A, B) != null) }, search: function(A, C){ for (var B = 0; B < A.length; B++) { if (A[B] == C) { return B } } return null }, cancelEvent: function(A){ A = A || window.event; if (A.preventDefault && A.stopPropagation) { A.preventDefault(); A.stopPropagation() } return false }, domLoad: [], domLoaded: function(){ if (arguments.callee.done) { return } arguments.callee.done = true; for (i = 0; i < bkLib.domLoad.length; i++) { bkLib.domLoadi } }, onDomLoaded: function(A){ this.domLoad.push(A); if (document.addEventListener) { document.addEventListener("DOMContentLoaded", bkLib.domLoaded, null) } else { if (bkLib.isMSIE) { document.write(".nicEdit-main p { margin: 0; }<\/script"); $BK("__ie_onload").onreadystatechange = function(){ if (this.readyState == "complete") { bkLib.domLoaded() } } } } window.onload = bkLib.domLoaded } }; function $BK(A){ if (typeof(A) == "string") { A = document.getElementById(A) } return (A && !A.appendTo) ? bkExtend(A, bkElement.prototype) : A } var bkEvent = { addEvent: function(A, B){ if (B) { this.eventList = this.eventList || {}; this.eventList[A] = this.eventList[A] || []; this.eventList[A].push(B) } return this }, fireEvent: function(){ var A = bkLib.toArray(arguments), C = A.shift(); if (this.eventList && this.eventList[C]) { for (var B = 0; B < this.eventList[C].length; B++) { this.eventList[C][B].apply(this, A) } } } }; function __(A){ return A } Function.prototype.closure = function(){ var A = this, B = bkLib.toArray(arguments), C = B.shift(); return function(){ if (typeof(bkLib) != "undefined") { return A.apply(C, B.concat(bkLib.toArray(arguments))) } } }; Function.prototype.closureListener = function(){ var A = this, C = bkLib.toArray(arguments), B = C.shift(); return function(E){ E = E || window.event; if (E.target) { var D = E.target } else { var D = E.srcElement } return A.apply(B, [E, D].concat(C)) } }; var nicEditorConfig = bkClass.extend({ buttons: { 'bold': { name: _('Mettre en gras'), command: 'Bold', tags: ['B', 'STRONG'], css: { 'font-weight': 'bold' }, key: 'b' }, 'italic': { name: _('Mettre en italique'), command: 'Italic', tags: ['EM', 'I'], css: { 'font-style': 'italic' }, key: 'i' }, 'underline': { name: _('Souligner'), command: 'Underline', tags: ['U'], css: { 'text-decoration': 'underline' }, key: 'u' }, 'left': { name: _('Aligné à gauche'), command: 'justifyleft', noActive: true }, 'center': { name: _('Centré'), command: 'justifycenter', noActive: true }, 'right': { name: _('Aligné à droite'), command: 'justifyright', noActive: true }, 'justify': { name: _('Justifié'), command: 'justifyfull', noActive: true }, 'ol': { name: _('Liste non ordonnée'), command: 'insertorderedlist', tags: ['OL'] }, 'ul': { name: _('Liste non ordonnée'), command: 'insertunorderedlist', tags: ['UL'] }, 'subscript': { name: _('Placer en indice'), command: 'subscript', tags: ['SUB'] }, 'superscript': { name: _('Placer en exposant'), command: 'superscript', tags: ['SUP'] }, 'strikethrough': { name: _('Barrer le texte'), command: 'strikeThrough', css: { 'text-decoration': 'line-through' } }, 'removeformat': { name: _('Supprimer la mise en forme'), command: 'removeformat', noActive: true }, 'indent': { name: _('Indenter'), command: 'indent', noActive: true }, 'outdent': { name: _('Remove Indent'), command: 'outdent', noActive: true }, 'hr': { name: _('Ligne horizontale'), command: 'insertHorizontalRule', noActive: true } }, iconsPath: 'http://js.nicedit.com/nicEditIcons-latest.gif', buttonList: ['save', 'bold', 'italic', 'underline', 'left', 'center', 'right', 'justify', 'ol', 'ul', 'fontSize', 'fontFamily', 'fontFormat', 'indent', 'outdent', 'image', 'upload', 'link', 'unlink', 'forecolor', 'bgcolor'], iconList: { "xhtml": 1, "bgcolor": 2, "forecolor": 3, "bold": 4, "center": 5, "hr": 6, "indent": 7, "italic": 8, "justify": 9, "left": 10, "ol": 11, "outdent": 12, "removeformat": 13, "right": 14, "save": 25, "strikethrough": 16, "subscript": 17, "superscript": 18, "ul": 19, "underline": 20, "image": 21, "link": 22, "unlink": 23, "close": 24, "arrow": 26, "upload": 27, "question":2 } }); ; var nicEditors = { nicPlugins: [], editors: [], registerPlugin: function(B, A){ this.nicPlugins.push({ p: B, o: A }) }, allTextAreas: function(C){ var A = document.getElementsByTagName("textarea"); for (var B = 0; B < A.length; B++) { nicEditors.editors.push(new nicEditor(C).panelInstance(A[B])) } return nicEditors.editors }, findEditor: function(C){ var B = nicEditors.editors; for (var A = 0; A < B.length; A++) { if (B[A].instanceById(C)) { return B[A].instanceById(C) } } } }; var nicEditor = bkClass.extend({ construct: function(C){ this.options = new nicEditorConfig(); bkExtend(this.options, C); this.nicInstances = new Array(); this.loadedPlugins = new Array(); var A = nicEditors.nicPlugins; for (var B = 0; B < A.length; B++) { this.loadedPlugins.push(new A[B].p(this, A[B].o)) } nicEditors.editors.push(this); bkLib.addEvent(document.body, "mousedown", this.selectCheck.closureListener(this)) }, panelInstance: function(B, C){ B = this.checkReplace($BK(B)); var A = new bkElement("DIV").setStyle({ width: (parseInt(B.getStyle("width")) || B.clientWidth) + "px" }).appendBefore(B); this.setPanel(A); return this.addInstance(B, C) }, checkReplace: function(B){ var A = nicEditors.findEditor(B); if (A) { A.removeInstance(B); A.removePanel() } return B }, addInstance: function(B, C){ B = this.checkReplace($BK(B)); if (B.contentEditable || !!window.opera) { var A = new nicEditorInstance(B, C, this) } else { var A = new nicEditorIFrameInstance(B, C, this) } this.nicInstances.push(A); return this }, removeInstance: function(C){ C = $BK(C); var B = this.nicInstances; for (var A = 0; A < B.length; A++) { if (B[A].e == C) { B[A].remove(); this.nicInstances.splice(A, 1) } } }, removePanel: function(A){ if (this.nicPanel) { this.nicPanel.remove(); this.nicPanel = null } }, instanceById: function(C){ C = $BK(C); var B = this.nicInstances; for (var A = 0; A < B.length; A++) { if (B[A].e == C) { return B[A] } } }, setPanel: function(A){ this.nicPanel = new nicEditorPanel($BK(A), this.options, this); this.fireEvent("panel", this.nicPanel); return this }, nicCommand: function(B, A){ if (this.selectedInstance) { this.selectedInstance.nicCommand(B, A) } }, getIcon: function(D, A){ var C = this.options.iconList[D]; var B = (A.iconFiles) ? A.iconFiles[D] : ""; return { backgroundImage: "url('" + ((C) ? this.options.iconsPath : B) + "')", backgroundPosition: ((C) ? ((C - 1) * -18) : 0) + "px 0px" } }, selectCheck: function(C, A){ var B = false; do { if (A.className && A.className.indexOf("nicEdit") != -1) { return false } } while (A = A.parentNode); this.fireEvent("blur", this.selectedInstance, A); this.lastSelectedInstance = this.selectedInstance; this.selectedInstance = null; return false } }); nicEditor = nicEditor.extend(bkEvent); var nicEditorInstance = bkClass.extend({ isSelected: false, construct: function(G, D, C){ this.ne = C; this.elm = this.e = G; this.options = D || {}; newX = parseInt(G.getStyle("width")) || G.clientWidth; newY = parseInt(G.getStyle("height")) || G.clientHeight; this.initialHeight = newY - 8; var H = (G.nodeName.toLowerCase() == "textarea"); if (H || this.options.hasPanel) { var B = (bkLib.isMSIE && !((typeof document.body.style.maxHeight != "undefined") && document.compatMode == "CSS1Compat")); var E = { width: newX + "px", border: "1px solid #ccc", borderTop: 0, overflowY: "auto", overflowX: "hidden" }; E[(B) ? "height" : "maxHeight"] = (this.ne.options.maxHeight) ? this.ne.options.maxHeight + "px" : null; this.editorContain = new bkElement("DIV").setStyle(E).appendBefore(G); var A = new bkElement("DIV").setStyle({ width: (newX - 8) + "px", margin: "4px", minHeight: newY + "px" }).addClass("main").appendTo(this.editorContain); G.setStyle({ display: "none" }); A.innerHTML = G.innerHTML; if (H) { A.setContent(G.value); this.copyElm = G; var F = G.parentTag("FORM"); if (F) { bkLib.addEvent(F, "submit", this.saveContent.closure(this)) } } A.setStyle((B) ? { height: newY + "px" } : { overflow: "hidden" }); this.elm = A } this.ne.addEvent("blur", this.blur.closure(this)); this.init(); this.blur() }, init: function(){ this.elm.setAttribute("contentEditable", "true"); if (this.getContent() == "") { this.setContent("") } this.instanceDoc = document.defaultView; this.elm.addEvent("mousedown", this.selected.closureListener(this)).addEvent("keypress", this.keyDown.closureListener(this)).addEvent("focus", this.selected.closure(this)).addEvent("blur", this.blur.closure(this)).addEvent("keyup", this.selected.closure(this)); this.elm.addEvent("resizestart",function(){return false}); this.elm.addEvent("dragstart",function(){return false}); this.ne.fireEvent("add", this); }, remove: function(){ this.saveContent(); if (this.copyElm || this.options.hasPanel) { this.editorContain.remove(); this.e.setStyle({ display: "block" }); this.ne.removePanel() } this.disable(); this.ne.fireEvent("remove", this) }, disable: function(){ this.elm.setAttribute("contentEditable", "false") }, getSel: function(){ return (window.getSelection) ? window.getSelection() : document.selection }, getRng: function(){ var A = this.getSel(); if (!A) { return null } return (A.rangeCount 0) ? A.getRangeAt(0) : A.createRange() }, selRng: function(A, B){ if (window.getSelection) { B.removeAllRanges(); B.addRange(A) } else { A.select() } }, selElm: function(){ var C = this.getRng(); if (C.startContainer) { var D = C.startContainer; if (C.cloneContents().childNodes.length == 1) { for (var B = 0; B < D.childNodes.length; B++) { var A = D.childNodes[B].ownerDocument.createRange(); A.selectNode(D.childNodes[B]); if (C.compareBoundaryPoints(Range.START_TO_START, A) != 1 && C.compareBoundaryPoints(Range.END_TO_END, A) != -1) { return $BK(D.childNodes[B]) } } } return $BK(D) } else { return $BK((this.getSel().type == "Control") ? C.item(0) : C.parentElement()) } }, saveRng: function(){ this.savedRange = this.getRng(); this.savedSel = this.getSel() }, restoreRng: function(){ if (this.savedRange) { this.selRng(this.savedRange, this.savedSel) } }, keyDown: function(B, A){ if (B.ctrlKey) { this.ne.fireEvent("key", this, B) } }, selected: function(C, A){ if (!A) { A = this.selElm() } if (!C.ctrlKey) { var B = this.ne.selectedInstance; if (B != this) { if (B) { this.ne.fireEvent("blur", B, A) } this.ne.selectedInstance = this; this.ne.fireEvent("focus", B, A) } this.ne.fireEvent("selected", B, A); this.isFocused = true; this.elm.addClass("selected") } return false }, blur: function(){ this.isFocused = false; this.elm.removeClass("selected") }, saveContent: function(){ if (this.copyElm || this.options.hasPanel) { this.ne.fireEvent("save", this); (this.copyElm) ? this.copyElm.value = this.getContent() : this.e.innerHTML = this.getContent() } }, getElm: function(){ return this.elm }, getContent: function(){ this.content = this.getElm().innerHTML; this.ne.fireEvent("get", this); return this.content }, setContent: function(A){ this.content = A; this.ne.fireEvent("set", this); this.elm.innerHTML = this.content }, nicCommand: function(B, A){ document.execCommand(B, false, A) } }); var nicEditorIFrameInstance = nicEditorInstance.extend({ savedStyles: [], init: function(){ var B = this.elm.innerHTML.replace(/^\s+|\s+$/g, ""); this.elm.innerHTML = ""; (!B) ? B = "" : B; this.initialContent = B; this.elmFrame = new bkElement("iframe").setAttributes({ src: "javascript:;", frameBorder: 0, allowTransparency: "true", scrolling: "no" }).setStyle({ height: "100px", width: "100%" }).addClass("frame").appendTo(this.elm); if (this.copyElm) { this.elmFrame.setStyle({ width: (this.elm.offsetWidth - 4) + "px" }) } var A = ["font-size", "font-family", "font-weight", "color"]; for (itm in A) { this.savedStyles[bkLib.camelize(itm)] = this.elm.getStyle(itm) } setTimeout(this.initFrame.closure(this), 50) }, disable: function(){ this.elm.innerHTML = this.getContent() }, initFrame: function(){ var B = $BK(this.elmFrame.contentWindow.document); B.designMode = "on"; B.open(); var A = this.ne.options.externalCSS; B.write("" + ((A) ? '' : "") + '' + this.initialContent + ""); B.close(); this.frameDoc = B; this.frameWin = $BK(this.elmFrame.contentWindow); this.frameContent = $BK(this.frameWin.document.body).setStyle(this.savedStyles); this.instanceDoc = this.frameWin.document.defaultView; this.heightUpdate(); this.frameDoc.addEvent("mousedown", this.selected.closureListener(this)).addEvent("keyup", this.heightUpdate.closureListener(this)).addEvent("keydown", this.keyDown.closureListener(this)).addEvent("keyup", this.selected.closure(this)); this.ne.fireEvent("add", this) }, getElm: function(){ return this.frameContent }, setContent: function(A){ this.content = A; this.ne.fireEvent("set", this); this.frameContent.innerHTML = this.content; this.heightUpdate() }, getSel: function(){ return (this.frameWin) ? this.frameWin.getSelection() : this.frameDoc.selection }, heightUpdate: function(){ this.elmFrame.style.height = Math.max(this.frameContent.offsetHeight, this.initialHeight) + "px" }, nicCommand: function(B, A){ this.frameDoc.execCommand(B, false, A); setTimeout(this.heightUpdate.closure(this), 100) } }); var nicEditorPanel = bkClass.extend({ construct: function(E, B, A){ this.elm = E; this.options = B; this.ne = A; this.panelButtons = new Array(); this.buttonList = bkExtend([], this.ne.options.buttonList); this.panelContain = new bkElement("DIV").setStyle({ overflow: "hidden", width: "100%", border: "1px solid #cccccc", backgroundColor: "#efefef" }).addClass("panelContain"); this.panelElm = new bkElement("DIV").setStyle({ margin: "2px", marginTop: "0px", zoom: 1, overflow: "hidden" }).addClass("panel").appendTo(this.panelContain); this.panelContain.appendTo(E); var C = this.ne.options; var D = C.buttons; for (button in D) { this.addButton(button, C, true) } this.reorder(); E.noSelect() }, addButton: function(buttonName, options, noOrder){ var button = options.buttons[buttonName]; var type = (button.type) ? eval("(typeof(" + button.type + ') == "undefined") ? null : ' + button.type + ";") : nicEditorButton; var hasButton = bkLib.inArray(this.buttonList, buttonName); if (type && (hasButton || this.ne.options.fullPanel)) { this.panelButtons.push(new type(this.panelElm, buttonName, options, this.ne)); if (!hasButton) { this.buttonList.push(buttonName) } } }, findButton: function(B){ for (var A = 0; A < this.panelButtons.length; A++) { if (this.panelButtons[A].name == B) { return this.panelButtons[A] } } }, reorder: function(){ var C = this.buttonList; for (var B = 0; B < C.length; B++) { var A = this.findButton(C[B]); if (A) { this.panelElm.appendChild(A.margin) } } }, remove: function(){ this.elm.remove() } }); var nicEditorButton = bkClass.extend({ construct: function(D, A, C, B){ this.options = C.buttons[A]; this.name = A; this.ne = B; this.elm = D; this.margin = new bkElement("DIV").setStyle({ "float": "left", marginTop: "2px" }).appendTo(D); this.contain = new bkElement("DIV").setStyle({ width: "20px", height: "20px" }).addClass("buttonContain").appendTo(this.margin); this.border = new bkElement("DIV").setStyle({ backgroundColor: "#efefef", border: "1px solid #efefef" }).appendTo(this.contain); this.button = new bkElement("DIV").setStyle({ width: "18px", height: "18px", overflow: "hidden", zoom: 1, cursor: "pointer" }).addClass("button").setStyle(this.ne.getIcon(A, C)).appendTo(this.border); this.button.addEvent("mouseover", this.hoverOn.closure(this)).addEvent("mouseout", this.hoverOff.closure(this)).addEvent("mousedown", this.mouseClick.closure(this)).noSelect(); if (!window.opera) { this.button.onmousedown = this.button.onclick = bkLib.cancelEvent } B.addEvent("selected", this.enable.closure(this)).addEvent("blur", this.disable.closure(this)).addEvent("key", this.key.closure(this)); this.disable(); this.init() }, init: function(){ }, hide: function(){ this.contain.setStyle({ display: "none" }) }, updateState: function(){ if (this.isDisabled) { this.setBg() } else { if (this.isHover) { this.setBg("hover") } else { if (this.isActive) { this.setBg("active") } else { this.setBg() } } } }, setBg: function(A){ switch (A) { case "hover": var B = { border: "1px solid #666", backgroundColor: "#ddd" }; break; case "active": var B = { border: "1px solid #666", backgroundColor: "#ccc" }; break; default: var B = { border: "1px solid #efefef", backgroundColor: "#efefef" } } this.border.setStyle(B).addClass("button-" + A) }, checkNodes: function(A){ var B = A; do { if (this.options.tags && bkLib.inArray(this.options.tags, B.nodeName)) { this.activate(); return true } } while (B = B.parentNode && B.className != "nicEdit"); B = $BK(A); while (B.nodeType == 3) { B = $BK(B.parentNode) } if (this.options.css) { for (itm in this.options.css) { if (B.getStyle(itm, this.ne.selectedInstance.instanceDoc) == this.options.css[itm]) { this.activate(); return true } } } this.deactivate(); return false }, activate: function(){ if (!this.isDisabled) { this.isActive = true; this.updateState(); this.ne.fireEvent("buttonActivate", this) } }, deactivate: function(){ this.isActive = false; this.updateState(); if (!this.isDisabled) { th

    Read the article

  • Drawing a TextBox in an extended Glass Frame (C# w/o WPF)

    - by Lazlo
    I am trying to draw a TextBox on the extended glass frame of my form. I won't describe this technique, it's well-known. Here's an example for those who haven't heard of it: http://www.danielmoth.com/Blog/Vista-Glass-In-C.aspx The thing is, it is complex to draw over this glass frame. Since black is considered to be the 0-alpha color, anything black disappears. There are apparently ways of countering this problem: drawing complex GDI+ shapes are not affected by this alpha-ness. For example, this code can be used to draw a Label on glass (note: GraphicsPath is used instead of DrawString in order to get around the horrible ClearType problem): public class GlassLabel : Control { public GlassLabel() { this.BackColor = Color.Black; } protected override void OnPaint(PaintEventArgs e) { GraphicsPath font = new GraphicsPath(); font.AddString( this.Text, this.Font.FontFamily, (int)this.Font.Style, this.Font.Size, Point.Empty, StringFormat.GenericDefault); e.Graphics.SmoothingMode = SmoothingMode.HighQuality; e.Graphics.FillPath(new SolidBrush(this.ForeColor), font); } } Similarly, such an approach can be used to create a container on the glass area. Note the use of the polygons instead of the rectangle - when using the rectangle, its black parts are considered as alpha. public class GlassPanel : Panel { public GlassPanel() { this.BackColor = Color.Black; } protected override void OnPaint(PaintEventArgs e) { Point[] area = new Point[] { new Point(0, 1), new Point(1, 0), new Point(this.Width - 2, 0), new Point(this.Width - 1, 1), new Point(this.Width -1, this.Height - 2), new Point(this.Width -2, this.Height-1), new Point(1, this.Height -1), new Point(0, this.Height - 2) }; Point[] inArea = new Point[] { new Point(1, 1), new Point(this.Width - 1, 1), new Point(this.Width - 1, this.Height - 1), new Point(this.Width - 1, this.Height - 1), new Point(1, this.Height - 1) }; e.Graphics.FillPolygon(new SolidBrush(Color.FromArgb(240, 240, 240)), inArea); e.Graphics.DrawPolygon(new Pen(Color.FromArgb(55, 0, 0, 0)), area); base.OnPaint(e); } } Now my problem is: How can I draw a TextBox? After lots of Googling, I came up with the following solutions: Subclassing the TextBox's OnPaint method. This is possible, although I could not get it to work properly. It should involve painting some magic things I don't know how to do yet. Making my own custom TextBox, perhaps on a TextBoxBase. If anyone has good, valid and working examples, and thinks this could be a good overall solution, please tell me. Using BufferedPaintSetAlpha. (http://msdn.microsoft.com/en-us/library/ms649805.aspx). The downsides of this method may be that the corners of the textbox might look odd, but I can live with that. If anyone knows how to implement that method properly from a Graphics object, please tell me. I personally don't, but this seems the best solution so far. Thanks!

    Read the article

  • ASPxGridView POST timeout

    - by Jo Asakura
    Hello all, I have a ASPxGridView with DetailRow in this row there are three additional ASPxGridViews. Each detail ASPxGridView contains EmptyDataRow templates with link to create a new row: <a href="javascript:gridViewDetails1.AddNewRow();">AddNewRecord</a> When master ASPxGridView rows is 1 or 2 then new rows in detail grids adding fine, but if in master ASPxGridView rows about 10 or more then when I clicking on detail grids link to add new row the loading panel appers for unlimited time and FireBug-Net shows that status of POST is timeout and time is about 1 sec. How can I repair it? To AGoodDisplayName: are the detail row gridviews bound to anything? yes of course, inside the details row of master gridView there are 3 another gridView and each of them have a separate ObjectDataSource. Are you expanding more than row at a time? No, I have only one row at time: AllowOnlyOneMasterRowExpanded="true" Can we see some of the mark up? Yep: <asp:ObjectDataSource ID="dsMaster" runat="server" TypeName="..." SelectMethod="..."> </asp:ObjectDataSource> <dxwgv:ASPxGridView ID="gridViewMaster" ClientInstanceName="gridViewMaster" runat="server" DataSourceID="dsMaster"> <Templates> <DetailRow> <%--first of details gridView--%> <asp:ObjectDataSource ID="dsDetail1" runat="server" TypeName="..." SelectMethod="..."> </asp:ObjectDataSource> <dxwgv:ASPxGridView ID="gridViewDetail1" ClientInstanceName="gridViewDetail1" runat="server" DataSourceID="dsDetail1"> <Templates> <EmptyDataRow> <a href="javascript:gridViewDetail1.AddNewRow();">AddNewRecord</a> </EmptyDataRow> </Templates> </dxwgv:ASPxGridView> <%--next others detail gridViews--%> </DetailRow> </Templates> </dxwgv:ASPxGridView>

    Read the article

  • DataBinding: 'System.String' does not contain a property with the name 'dbMake'.

    - by marcmiki
    Hi , i am a newbie at ASP.net and after using sqldatasource with a listview to insert and show results from an SQL server db i want to try using the LINQ datasource since it seems to be more flexible in codebehind. My problem is this: i droped a listview control to the page and i created the Linq datasource in codebehind with vb. the issue that i am having when i ..Select d.columms name i get the error system.string does not contain a property with the name "columname".. if i ommit the column name then its works fine.. the funny part is the d.count works fine but after that i get the error.. please see my code below: vb code Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim rowsCount As Integer Dim showSearchForm As String showSearchForm = Request.QueryString("tab") If showSearchForm = "1" Then Dim db As New ASPNETDBDataContext() Dim q = From b In db.PassengerVehiclesTables Select b.dbMake rowsCount = q.Count MsgBox(rowsCount) lvMakes.DataSource = q lvMakes.DataBind() PnlPassengerVehiclesSearch.Visible = True ElseIf showSearchForm = "2" Then aspx code <asp:Panel ID="PnlPassengerVehiclesSearch" Visible="false" runat="server"> Search Passenger Vehicles Form.....<br /> <table style="width: 100%; border-style: solid; border-width: 1px"> <tr> <td> <asp:ListView ID="lvMakes" runat="server"> <LayoutTemplate> <asp:PlaceHolder runat="server" ID="itemPlaceholder" /> </LayoutTemplate> <ItemTemplate> <%#Eval("dbMake")%><br /> </ItemTemplate> </asp:ListView> </td> b.dbMake needs to work so that i can use Distinct ,, ia m using asp.net version:3.5 and IIS version 7.0 .. not sure what i am missing ,, but i did try alot of approaches,,1- checked the web.config file and it seems to have two assemblies and two namespaces for LINQ..2- used different databinding syntaxs,,and i searched a lot for the solution.. the last one i read the person ommited the name of the column,, i thought that wasnt the best solution.. also my dbMake column is comming up in the "intellisence" .. thank you in advance for your help..

    Read the article

  • How do I add a listener that will work on individual Fieldset in Extjs? Clicking the "Add" button sh

    - by Nair
    Testing Window /*! * Ext JS Library 3.0.0 * Copyright(c) 2006-2009 Ext JS, LLC * [email protected] * http://www.extjs.com/license */ Ext.onReady(function(){ Ext.override( Ext.data.Store, { findExact: function( fld, val ) { var hit = null; this.each( function(rec) { if( rec.get(fld) == val ) { hit = rec; return false; }; } ); return hit; } }); var listAdded = 0; var addListBtn = { text: 'Add', handler: function() { Ext.getCmp('tab_list').add(getList()); Ext.getCmp('tab_list').doLayout(); } } var testData = new Ext.data.SimpleStore({ fields: ['no', 'name', 'address','phone','businessPhone'], data: [['68', 'Target','123 Valley Road','(345) 908-9087','(345) 908-9087'], ['69', 'Walmart','456 Main Road','(345) 908-9999','(345) 908-9990']] }); var getList = function() { listAdded++; var items = new Ext.form.FieldSet( { id:listAdded, title: listAdded, collapsible: true, layout: 'form', autoHeight: true, defaults: {width: 300}, defaultType: 'textfield', bodyStyle: 'padding:5px', labelWidth: 225, items: [ { xtype: 'combo', fieldLabel: 'Customer No', name: 'changescustomerNo', hiddenName: 'changescustomerNo', store: new Ext.data.SimpleStore({ fields: ['id','value'], data: [['68','Test1'],['69','Test2']] }), displayField: 'value', valueField: 'id', selectOnFocus: true, mode: 'local', editable: false, triggerAction: 'all', value: ' ', listeners:{select:{ fn:function(combo, value) { var m = testData.findExact( 'no', this.value ); if(m) { //alert(this.id); Ext.getCmp('currentName').setValue(m.get('name')); Ext.getCmp('currentAddress').setValue(m.get('address')); Ext.getCmp('currentTelephoneNumber').setValue(m.get('phone')); Ext.getCmp('currentBusTelephoneNumber').setValue(m.get('businessPhone')); } }//function }//select }//listeners },{ id: 'currentName', fieldLabel: 'Current Name', name: 'currentName', value: '' },{ id: 'currentAddress', width: 298, xtype: 'textarea', fieldLabel: 'Current Address', name: 'currentAddress', value: '' },{ id:'currentTelephoneNumber', fieldLabel: 'Current Telephone Number', name: 'currentTelephoneNumber', value: '' },{ id: 'currentBusTelephoneNumber', fieldLabel: 'Current Business Telephone Number', name: 'currentBusTelephoneNumber', value: '' } ] } ); return items; } var pnlMain = new Ext.Panel({ id: 'theForm', title: 'Sample List', bodyStyle:'padding:5px', autoWidth: true, frame: true, items: [{ xtype: 'tabpanel', id: 'tabpanel', activeTab: 0, height: 540, width: '100%', resizeTabs: true, tabWidth: 125, minTabWidth: 125, layoutOnTabChange: true, deferredRender: false, // Create all form elements on load defaults: { bodyStyle: 'padding:10px', autoScroll: true, layout: 'form', defaultType: 'textfield', labelWidth: 160 }, items:[{ id: 'tab_list', title: 'List', items: getList(), buttons: [ addListBtn ] }] }] }); pnlMain.render('main'); });

    Read the article

  • WPF Formatting Issues - Automatically stretching and resizing?

    - by Adam S
    I'm very new to WPF and XAML. I am trying to design a basic data entry form. I have used a stack panel holding four more stack panels to get the layout I want. Perhaps a grid would be better for this, I am not sure. Here is an image of my form in action: http://yfrog.com/7gscreenshot1impp And here is the XAML code that generates it: <Window x:Class="Test1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="224" Width="536.762"> <StackPanel Height="Auto" Name="stackPanel1" Width="Auto" Orientation="Horizontal"> <StackPanel Height="Auto" Name="stackPanel2" Width="Auto"> <Label Height="Auto" Name="label1" Width="Auto">Patient Name:</Label> <Label Height="Auto" Name="label2" Width="Auto">Physician:</Label> <Label Height="Auto" Name="label3" Width="Auto">Insurance:</Label> <Label Height="Auto" Name="label4" Width="Auto">Therapy Goals:</Label> </StackPanel> <StackPanel Height="Auto" Name="stackPanel3" Width="Auto"> <TextBox Height="Auto" Name="textBox1" Width="Auto" Padding="3" Margin="1" /> <TextBox Height="Auto" Name="textBox2" Width="Auto" Padding="3" Margin="1" /> <TextBox Height="Auto" Name="textBox3" Width="Auto" Padding="3" Margin="1" /> <TextBox Height="Auto" Name="textBox4" Width="Auto" Padding="3" Margin="1" /> </StackPanel> <StackPanel Height="Auto" Name="stackPanel4" Width="Auto"> <Label Height="Auto" Name="label5" Width="Auto">Date:</Label> <Label Height="Auto" Name="label6" Width="Auto">Patient Phone:</Label> <Label Height="Auto" Name="label7" Width="Auto">Facility:</Label> <Label Height="Auto" Name="label8" Width="Auto">Referring Physician:</Label> </StackPanel> <StackPanel Height="Auto" Name="stackPanel5" Width="Auto"> <TextBox Height="Auto" Name="textBox5" Width="Auto" Padding="3" Margin="1" /> <TextBox Height="Auto" Name="textBox6" Width="Auto" Padding="3" Margin="1" /> <TextBox Height="Auto" Name="textBox7" Width="Auto" Padding="3" Margin="1" /> <TextBox Height="Auto" Name="textBox8" Width="Auto" Padding="3" Margin="1" /> </StackPanel> </StackPanel> </Window> What I really want is for the text boxes to stretch equally to fill up the space horizontally. I would also like for the controls in each vertical stackpanel to 'spread out' evenly as the window is resized vertically. Can any of you experts out there help me out?

    Read the article

  • What output and recording ports does the Java Sound API find on your computer?

    - by Dave Carpeneto
    Hi all - I'm working with the Java Sound API, and it turns out if I want to adjust recording volumes I need to model the hardware that the OS exposes to Java. Turns out there's a lot of variety in what's presented. Because of this I'm humbly asking that anyone able to help me run the following on their computer and post back the results so that I can get an idea of what's out there. A thanks in advance to anyone that can assist :-) import javax.sound.sampled.*; public class SoundAudit { public static void main(String[] args) { try { System.out.println("OS: "+System.getProperty("os.name")+" "+ System.getProperty("os.version")+"/"+ System.getProperty("os.arch")+"\nJava: "+ System.getProperty("java.version")+" ("+ System.getProperty("java.vendor")+")\n"); for (Mixer.Info thisMixerInfo : AudioSystem.getMixerInfo()) { System.out.println("Mixer: "+thisMixerInfo.getDescription()+ " ["+thisMixerInfo.getName()+"]"); Mixer thisMixer = AudioSystem.getMixer(thisMixerInfo); for (Line.Info thisLineInfo:thisMixer.getSourceLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Source Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}} for (Line.Info thisLineInfo:thisMixer.getTargetLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Target Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}}} } catch (Exception e) {e.printStackTrace();}} public static String AnalyzeControl(Control thisControl) { String type = thisControl.getType().toString(); if (thisControl instanceof BooleanControl) { return " Control: "+type+" (boolean)"; } if (thisControl instanceof CompoundControl) { System.out.println(" Control: "+type+ " (compound - values below)"); String toReturn = ""; for (Control children: ((CompoundControl)thisControl).getMemberControls()) { toReturn+=" "+AnalyzeControl(children)+"\n";} return toReturn.substring(0, toReturn.length()-1);} if (thisControl instanceof EnumControl) { return " Control:"+type+" (enum: "+thisControl.toString()+")";} if (thisControl instanceof FloatControl) { return " Control: "+type+" (float: from "+ ((FloatControl) thisControl).getMinimum()+" to "+ ((FloatControl) thisControl).getMaximum()+")";} return " Control: unknown type";} } All the application does is print out a line about the OS, a line about the JVM, and a few lines about the hardware found that may pertain to recording hardware. For example on my PC at work I get the following: OS: Windows XP 5.1/x86 Java: 1.6.0_07 (Sun Microsystems Inc.) Mixer: Direct Audio Device: DirectSound Playback [Primary Sound Driver] Mixer: Direct Audio Device: DirectSound Playback [SoundMAX HD Audio] Mixer: Direct Audio Device: DirectSound Capture [Primary Sound Capture Driver] Mixer: Direct Audio Device: DirectSound Capture [SoundMAX HD Audio] Mixer: Software mixer and synthesizer [Java Sound Audio Engine] Mixer: Port Mixer [Port SoundMAX HD Audio] Source Port: MICROPHONE source port Control: Microphone (compound - values below) Control: Select (boolean) Control: Microphone Boost (boolean) Control: Front panel microphone (boolean) Control: Volume (float: from 0.0 to 1.0) Source Port: LINE_IN source port Control: Line In (compound - values below) Control: Select (boolean) Control: Volume (float: from 0.0 to 1.0) Control: Balance (float: from -1.0 to 1.0)

    Read the article

  • Failed to load viewstate

    - by Jen
    OK have just started getting this error and I'm not sure why. I have a hosting page which has listview and a panel with a usercontrol. The listview loads up records with a linkbutton. You click the link button to edit that particular record - which gets loaded up in the formview (within the usercontrol) which goes to edit mode. After an update occurs in the formview I'm triggering an event which my hosting page is listening for. The hosting page then rebinds the listview to show the updated data. So this all works - but when I then go to click on a different linkbutton I get the below error: Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.3) Timestamp: Fri, 18 Jun 2010 03:15:54 UTC Message: Sys.WebForms.PageRequestManagerServerErrorException: Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request. Line: 4723 Char: 21 Code: 0 URI: http://localhost:1951/AdminWebSite/ScriptResource.axd?d=yfdLw4zYs0bqYqs1arL-htap1ceeKCyW1EXhrhMZy_AqJ36FUpx8b2pzMKL6V7ebYsgJDVm_sZ_ykV1hNtFqgYcJCLLtardHm9-yyA7zC4k1&t=ffffffffec2d9970 Any suggestions as to what is actually wrong?? My event listener does this: protected void RatesEditDate1_EditDateRateUpdated() { if (IsDateRangeValid(txtDisplayFrom, txtDisplayTo)) { PropertyAccommodationRates1.DataBind(); } else { pnlViewAccommodationRates.Visible = false; } divEditRate.Visible = false; } When I click my link button - it should be hitting this but the second time round it errors before hitting the breakpoint: protected void RatesEditDate1_EditDateRateSelected(DateTime theDateTime) { // make sure everything else is invisible pnlAddAccommodation.Visible = false; pnlViewEditAccommodations.Visible = false; RatesEditDate1.TheDateTime = theDateTime; RatesEditDate1.PropertyID = (int)Master.PropertyId; if (!String.IsNullOrEmpty(Accommodations1.SelectedValue)) { RatesEditDate1.AccommodationTypeID = Convert.ToInt32(Accommodations1.SelectedValue); } else { RatesEditDate1.AccommodationTypeID = 0; } divEditRate.Visible = true; } So my listview appears to be being rebound successfully - I can see my changed data.. I just don't know why its complaining about viewstate when I click on the linkbutton. Or is there a better way to update the data in my listview? My listview and formview are bound to objectdata sources (in case that matters) Thanks for the help!

    Read the article

  • How do I remove the namespaces in Zend_Soap?

    - by Marc
    Hi There I am trying to use the tranlsation webservice from MyMemory: http://mymemory.translated.net/doc/spec.php Unfortunately, Zend_Soap_Client does generate an XML reqest object that is not recognized by the service. I guess it is because of the ns1-Attribute (Namespace) within the tags. So does anyone know how to remove them? That's basically what I do: $client = new Zend_Soap_Client('http://mymemory.translated.net/otms/?wsdl', array( 'soap_version' => SOAP_1_1 )); Then I call the function: try { $client->otmsGet(array( 'key' => 'xxx', 'q' => array( 'source' => 'Computer Science', 'source_lang' => 'en-US', 'target_lang' => 'de-DE' ) )); } catch(Exception $e) { print $client->getLastRequest(); } The resulting XML looks like this: <?xml version="1.0" encoding="UTF-8"?> <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://tempuri.org/"> <SOAP-ENV:Body> <ns1:otmsGet> <ns1:key>xxx</ns1:key> <ns1:q> <ns1:source>Computer Science</ns1:source> <ns1:source_lang>en-US</ns1:source_lang> <ns1:target_lang>de-DE</ns1:target_lang> </ns1:q> </ns1:otmsGet> </SOAP-ENV:Body> </SOAP-ENV:Envelope> And it should actually look like this: <?xml version="1.0" encoding="UTF-8" standalone="no"?> <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP-ENV:Body> <otmsGet xmlns="http://tempuri.org/"> <key xmlns:SOAPSDK1="http://tempuri.org/">mmDemo123</key> <q xmlns:SOAPSDK2="http://tempuri.org/"> <source>control panel</source> <source_lang>en-US</source_lang> <target_lang>es-ES</target_lang> </q> </otmsGet> </SOAP-ENV:Body> </SOAP-ENV:Envelope> Thanks for your help!

    Read the article

< Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >