Search Results

Search found 27248 results on 1090 pages for 'table adapter'.

Page 667/1090 | < Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >

  • MicroSD card isn't detected by computer, apparently usable only with phone

    - by paulcjoubert
    I have a 4GB MicroSD card that apparently only works (in the sense that the device detects and can read and write from and to the card) with my old Nokia XpressMusic 5800 phone. I have taken pictures and recorded voice notes that were saved on the card. These are accessible after the card has been removed, which tells me that the problem isn't with the card. The card could also not be locked to the phone as it would at least be detected by a computer and it would be able to write raw data to it with dd, such as /dev/zero. Also, the card is not the Nokia card that came with the phone and I have done nothing that would have caused it to be locked. (I could not find anything on Nokia's website that helps, but then again... my search was not THAT thorough.) The card works on no other device that I have tried so far. I have tried it in my Canon camera (through an adapter), but it refuses to even boot with the card inserted. My card reader (via USB cable and hub) is detected as /dev/sdx with or without the card inserted. When trying to access the card I get an "No medium found". dmesg does not report any change at all when inserting and removing the card. I would obviously like to use my card on other devices - the phone is quite old - and even a likely explanation would help. Thankyou in advance! EDIT 1: I can use the card by connecting the phone to my computer, but this is impractical and would not allow me to use the card in any other device. EDIT 2: The data on the card is not important to me at all.

    Read the article

  • Artificial Intelligence implemented in x86 Assembly? [closed]

    - by Bigyellow Bastion
    Okay, so I decided that for my upcoming operating system, I do basically everything in x86 Assembly, using only 16-bit mode. I will need to write the software to host on it once I have something up and going, and I'll definitely post the source and VM-executable file. But as for now I'm stuck with the idea of implementing the AI code for some of the games I'm making to host on it. AI in Assembly is tedious, and sometimes almost impossible seeming, especially complex AI(I'm talking SNES Super Mario World 2: Yoshi's Island AI here, by the way, not pong AI). I was thinking that it'd be such a hassle that I'd have to bring a higher-level language to work some of this out here, like maybe C++ or C#, but I'd have to go through more work linking it into a fine binary that my OS will host, and that adds unnecessary work to the table I wanted to avoid(I don't want a complex system, I want everything as bare-bones as possible, avoiding libraries, APIs, and linkable formats for now, to make everything more directly accessible to the kernel's API).

    Read the article

  • Do you start migrating your Swing project to JavaFX

    - by Yan Cheng CHEOK
    I have a 4 years old project which is written in Swing + SwingX. Currently, it is still alive and still kicking. However, as more GUI related feature requests coming in (For instance, a sortable tree table), I start to feel the difficulty in fulling the requests. This is true especially there isn't active development going around SwingX project. Also, I hardly can find any good, yet being actively maintained/ developed/ evolving GUI Java framework. I was wondering, any of Swing developers feel the same thing? Have you start to migrate your Swing project to a much more active developed GUI framework like JavaFX?

    Read the article

  • Creating the Business Card Request InfoPath Form

    - by JKenderdine
    Business Card Request Demo Files Back in January I spoke at SharePoint Saturday Virginia Beach about InfoPath forms and Web Part deployment.  Below is some of the information and details regarding the form I created for the session.  There are many blogs and Microsoft articles on how to create a basic form so I won’t repeat that information here.   This blog will just explain a few of the options I chose when creating the solutions for SPS Virginia Beach.  The above link contains the zipped package files of the two InfoPath forms(no code solution and coded solution), the list template for the Location list I used, and the PowerPoint deck.  If you plan to use these templates, you will need to update the forms to work within your own environments (change data connections, code links, etc.).  Also, you must have the SharePoint Enterprise version, with InfoPath Services configured in order to use the Web Browser enabled forms. So what are the requirements for this template? Business Card Request Form Template Design Plan: Gather user information and requirements for card Pull in as much user information as possible. Use data from the user profile web services as a data source Show and hide fields as necessary for requirements Create multiple views – one for those submitting the form and Another view for the executive assistants placing the orders. Browser based form integrated into SharePoint team site Submitted directly to form library The base form was created using the blank template.  The table and rows were added using Insert tab and selecting Custom Table.  The use of tables is a great way to make sure everything lines up.  You do have to split the tables from time to time.  If you’ve ever split cells and then tried to re-align one to find that you impacted the others, you know why.  Here is what the base form looks like in InfoPath.   Show and hide fields as necessary for requirements You will notice I also used Sections within the form.  These show or hide depending on options selected or whether or not fields are blank.  This is a great way to prevent your users from feeling overwhelmed with a large form (this one wouldn’t apply).  Although not used in this one, you can also use various views with a tab interface.  I’ll show that in another post. Gather user information and requirements for card Pull in as much user information as possible. Use data from the user profile web services as a data source Utilizing rules you can load data when the form initiates (Data tab, Form Load).  Anything you can automate is always appreciated by the user as that is data they don’t have to enter.  For example, loading their user id or other user information on load: Always keep in mind though how much data you load and the method for loading that data (through rules, code, etc.).  They have an impact on form performance.  The form will take longer to load if you bring in a ton of data from external sources.  Laura Rogers has a great blog post on using the User Information List to load user information.   If the user has logged into SharePoint, then this can be used quite effectively and without a huge performance hit.   What I have found is that using the User Profile service via code behind or the Web Service “GetUserProfileByName” (as above) can take more time to load the user data.  Just food for thought. You must add the data connection in order for the above rules to work.  You can connect to the data connection through the Data tab, Data Connections or select Manage Data Connections link which appears under the main data source.  The data connections can be SharePoint lists or libraries, SQL data tables, XML files, etc.  Create multiple views – one for those submitting the form and Another view for the executive assistants placing the orders. You can also create multiple views for the users to enhance their experience.  Once they’ve entered the information and submitted their request for business cards, they don’t really need to see the main data input screen any more.  They just need to view what they entered. From the Page Design tab, select New View and give the view a name.  To review the existing views, click the down arrow under View: The ReviewView shows just what the user needs and nothing more: Once you have everything configured, the form should be tested within a Test SharePoint environment before final deployment to production.  This validates you don’t have any rules or code that could impact the server negatively. Submitted directly to form library   You will need to know the form library that you will be submitting to when publishing the template.  Configure the Submit data connection to connect to this library.  There is already one configured in the sample,  but it will need to be updated to your environment prior to publishing. The Design template is different from the Published template.  While both have the .XSN extension, the published template contains all the “package” information for the form.  The published form is what is loaded into Central Admin, not the design template. Browser based form integrated into SharePoint team site In Central Admin, under General Settings, select Manage Form Templates.  Upload the published form template and Activate it to a site collection. Now it is available as a content type to select in the form library.  Some documentation on publishing form templates:  Technet – Manage administrator approved form templates And that’s all our base requirements.  Hope this helps to give a good start.

    Read the article

  • When using membership provider, do you use the user ID or the username?

    - by Chris
    I've come across this is in a couple of different applications that I've worked on. They all used the ASP.NET Membership Provider for user accounts and controlling access to certain areas, but when we've gotten down into the code I've noticed that in one we're passing around the string based user name, like "Ralph Waters", or we're passing around the Guid based user ID from the membership table. Now both seem to work. You can make methods which get by username, or get by user ID, but both have felt somewhat "funny". When you pass a string like "Ralph Waters" you're passing essentially two separate words that make up a unique identifier. And with a Guid, you're passing around a string/number combination which can be cast and made unique. So my question is this; when using Membership Provider, which do you use, the username or the user ID to get back to the user? Thanks all!

    Read the article

  • ODI 12c - Aggregating Data

    - by David Allan
    This posting will look at the aggregation component that was introduced in ODI 12c. For many ETL tool users this shouldn't be a big surprise, its a little different than ODI 11g but for good reason. You can use this component for composing data with relational like operations such as sum, average and so forth. Also, Oracle SQL supports special functions called Analytic SQL functions, you can use a specially configured aggregation component or the expression component for these now in ODI 12c. In database systems an aggregate transformation is a transformation where the values of multiple rows are grouped together as input on certain criteria to form a single value of more significant meaning - that's exactly the purpose of the aggregate component. In the image below you can see the aggregate component in action within a mapping, for how this and a few other examples are built look at the ODI 12c Aggregation Viewlet here - the viewlet illustrates a simple aggregation being built and then some Oracle analytic SQL such as AVG(EMP.SAL) OVER (PARTITION BY EMP.DEPTNO) built using both the aggregate component and the expression component. In 11g you used to just write the aggregate expression directly on the target, this made life easy for some cases, but it wan't a very obvious gesture plus had other drawbacks with ordering of transformations (agg before join/lookup. after set and so forth) and supporting analytic SQL for example - there are a lot of postings from creative folks working around this in 11g - anything from customizing KMs, to bypassing aggregation analysis in the ODI code generator. The aggregate component has a few interesting aspects. 1. Firstly and foremost it defines the attributes projected from it - ODI automatically will perform the grouping all you do is define the aggregation expressions for those columns aggregated. In 12c you can control this automatic grouping behavior so that you get the code you desire, so you can indicate that an attribute should not be included in the group by, that's what I did in the analytic SQL example using the aggregate component. 2. The component has a few other properties of interest; it has a HAVING clause and a manual group by clause. The HAVING clause includes a predicate used to filter rows resulting from the GROUP BY clause. Because it acts on the results of the GROUP BY clause, aggregation functions can be used in the HAVING clause predicate, in 11g the filter was overloaded and used for both having clause and filter clause, this is no longer the case. If a filter is after an aggregate, it is after the aggregate (not sometimes after, sometimes having).  3. The manual group by clause let's you use special database grouping grammar if you need to. For example Oracle has a wealth of highly specialized grouping capabilities for data warehousing such as the CUBE function. If you want to use specialized functions like that you can manually define the code here. The example below shows the use of a manual group from an example in the Oracle database data warehousing guide where the SUM aggregate function is used along with the CUBE function in the group by clause. The SQL I am trying to generate looks like the following from the data warehousing guide; SELECT channel_desc, calendar_month_desc, countries.country_iso_code,       TO_CHAR(SUM(amount_sold), '9,999,999,999') SALES$ FROM sales, customers, times, channels, countries WHERE sales.time_id=times.time_id AND sales.cust_id=customers.cust_id AND   sales.channel_id= channels.channel_id  AND customers.country_id = countries.country_id  AND channels.channel_desc IN   ('Direct Sales', 'Internet') AND times.calendar_month_desc IN   ('2000-09', '2000-10') AND countries.country_iso_code IN ('GB', 'US') GROUP BY CUBE(channel_desc, calendar_month_desc, countries.country_iso_code); I can capture the source datastores, the filters and joins using ODI's dataset (or as a traditional flow) which enables us to incrementally design the mapping and the aggregate component for the sum and group by as follows; In the above mapping you can see the joins and filters declared in ODI's dataset, allowing you to capture the relationships of the datastores required in an entity-relationship style just like ODI 11g. The mix of ODI's declarative design and the common flow design provides for a familiar design experience. The example below illustrates flow design (basic arbitrary ordering) - a table load where only the employees who have maximum commission are loaded into a target. The maximum commission is retrieved from the bonus datastore and there is a look using employees as the driving table and only those with maximum commission projected. Hopefully this has given you a taster for some of the new capabilities provided by the aggregate component in ODI 12c. In summary, the actions should be much more consistent in behavior and more easily discoverable for users, the use of the components in a flow graph also supports arbitrary designs and the tool (rather than the interface designer) takes care of the realization using ODI's knowledge modules. Interested to know if a deep dive into each component is interesting for folks. Any thoughts? 

    Read the article

  • Maximize Performance and Availability with Oracle Data Integration

    - by Tanu Sood
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-fareast-font-family:Calibri; mso-bidi-font-family:"Times New Roman";} Alert: Oracle is hosting the 12c Launch Webcast for Oracle Data Integration and Oracle Golden Gate on Tuesday, November 12 (tomorrow) to discuss the new capabilities in detail and share customer perspectives. Hear directly from customer experts and executives from SolarWorld Industries America, British Telecom and Rittman Mead and get your questions answered live by product experts. Register for this complimentary webcast today and join in the discussion tomorrow. Author: Irem Radzik, Senior Principal Product Director, Oracle Organizations that want to use IT as a strategic point of differentiation prefer Oracle’s complete application offering to drive better business performance and optimize their IT investments. These enterprise applications are in the center of business operations and they contain critical data that needs to be accessed continuously, as well as analyzed and acted upon in a timely manner. These systems also need to operate with high-performance and availability, which means analytical functions should not degrade applications performance, and even system maintenance and upgrades should not interrupt availability. Oracle’s data integration products, Oracle Data Integrator, Oracle GoldenGate, and Oracle Enterprise Data Quality, provide the core foundation for bringing data from various business-critical systems to gain a broader, unified view. As a more advance offering to 3rd party products, Oracle’s data integration products facilitate real-time reporting for Oracle Applications without impacting application performance, and provide ability to upgrade and maintain the system without taking downtime. Oracle GoldenGate is certified for Oracle Applications, including E-Business Suite, Siebel CRM, PeopleSoft, and JD Edwards, for moving transactional data in real-time to a dedicated operational reporting environment. This solution allows the app users to offload the resource-heavy queries to the reporting instance(s), reducing CPU utilization, improving OLTP performance, and extending the lifetime of existing IT assets. In addition, having a dedicated reporting instance with up-to-the-second transactional data allows optimizing the reporting environment and even decreasing costs as GoldenGate can move only the required data from expensive mainframe environments to cost-efficient open system platforms.  With real-time data replication capabilities GoldenGate is also certified to enable application upgrades and database/hardware/OS migration without impacting business operations. GoldenGate is certified for Siebel CRM, Communications Billing and Revenue Management and JD Edwards for supporting zero downtime upgrades to the latest app version. GoldenGate synchronizes a parallel, upgraded system with the old version in real time, thus enables continuous operations during the process. Oracle GoldenGate is also certified for minimal downtime database migrations for Oracle E-Business Suite and other key applications. GoldenGate’s solution also minimizes the risk by offering a failback option after the switchover to the new environment. Furthermore, Oracle GoldenGate’s bidirectional active-active data replication is certified for Oracle ATG Web Commerce to enable geographically load balancing and high availability for ATG customers. For enabling better business insight, Oracle Data Integration products power Oracle BI Applications with high performance bulk and real-time data integration. Oracle Data Integrator (ODI) is embedded in Oracle BI Applications version 11.1.1.7.1 and helps to integrate data end-to-end across the full BI Applications architecture, supporting capabilities such as data-lineage, which helps business users identify report-to-source capabilities. ODI is integrated with Oracle GoldenGate and provides Oracle BI Applications customers the option to use real-time transactional data in analytics, and do so non-intrusively. By using Oracle GoldenGate with the latest release of Oracle BI Applications, organizations not only leverage fresh data in analytics, but also eliminate the need for an ETL batch window and minimize the impact on OLTP systems. You can learn more about Oracle Data Integration products latest 12c version in our upcoming launch webcast and access the app-specific free resources in the new Data Integration for Oracle Applications Resource Center.

    Read the article

  • OWB 11gR2 &ndash; Parallel DML and Query

    - by David Allan
    A quick post illustrating conventional (non direct path) parallel inserts and query using OWB following on from some recent posts from Jean-Pierre and Randolf on this topic. The mapping configuration properties is where you can define these hints in OWB, taking JP’s simplistic illustration, the parallel query hints in OWB are defined on the ‘Extraction hint’ property for the source, and the parallel DML hints are defined on the ‘Loading hint’ property on the target table operator. If we then generate the code you can see the intermediate code generated below… Finally…remember the parallel enabled session for this all to fly… Anyway, hope this helps join a few dots….

    Read the article

  • Preventing RSI (Repetitive Strain Injuries)

    - by nightcracker
    I am 16 years old and I love to program and playing the piano. It's not uncommon that I'm bashing away on my mouse and keyboard all day long. I do not feel any pains doing so. Yet I am still worried, because I often hear from people that they can never type for longer then 10 minutes again without getting severe pains. Given my two hobbies, programming and playing the piano that worries me a lot. My current situation is this: G15 keyboard and G5 mouse A chair that looks like this (the back of the chair is surprisingly supportive): http://www.ikea.com/nl/nl/images/products/torbjorn-bureaustoel__0084333_PE210956_S4.JPG In my "normal sitting position" the table is around the height of my bellybutton. A LG Flatron L194wt screen (too small IMO, getting a new one soon) Should I be worrying about RSI/similar health issues? If yes, what can/should I do about it?

    Read the article

  • Optical Audio out stuck on on a MacBook

    - by Clinton Blackmore
    Apple have made an interesting headphone port for the MacBook (and some other Intel Mac models). It works like a standard jack: nothing plugged in - audio comes out of built-in speakers headphones/external speakers plugged in - plays through headphones/external speakers but you can also use a special adapter (which trips a tiny microswitch) to get an optical audio out signal (which you can presumably plug into a nice surround-sound system). This is all well and good except when, like auto-tracking, it doesn't work, and you are left with nothing to adjust. Users report that they get no sound when they have nothing plugged in and that a red light emanates from the headphone port. If you go to System Preferences - Sound - Output, it will say (IIRC) "Optical Out" instead of "Internal Speakers". The only solution I'm aware of is to try to reset the switch by inserting and removing a set of headphones or a toothpick, perhaps wiggling it inside of the port, and hoping that you luck out and get it. Are there other ways to fix this problem? Does anyone know where the microswitch is or have a good technique to reset it?

    Read the article

  • Minimum specs needed to run 1080p HD movies?

    - by Wesley
    Hi all, I was wondering how low you could go with hardware that would still be able to smoothly run HD movies. My current plan is around $215 CAD w/o a hard drive: Intel Pentium 4 @ 3.2 GHz - 1GB DDR/SDRAM - 512MB X1600 Pro AGP - 350W PSU - ECS P4VXASD2+ - Bluray/DVD-RW drive. As for the hard drive, could I just get a 7200RPM IDE HDD? Also, I'm planning on installing XP Pro SP3, unless Ubuntu somehow has an advantage. I'm not wanting this to be a media center only computer... just want it to be a normal computer with just enough oomph to play HD movies. Thanks in advance. EDIT1: Forgot to mention that the Bluray/DVD-RW drive is SATA, but I was planning on getting an SATA-IDE adapter or a PCI card with SATA. EDIT2: Oh yes... if I get a PCI card with SATA, would you then recommend I use an SATA hard drive as well? That would leave all the IDE ports on the motherboard unused... is that a good idea?

    Read the article

  • Is current SATA 6 gb/s equipment simply unreliable?

    - by korkman
    I have a 45-disk array of Seagate Barracuda 3 TB ST3000DM001 (yes these are desktop drives I'm aware of that) in a Supermicro sc847 JBOD, connected via LSI 9285. I have found a solution for the problem description below by reducing speed via MegaCli -PhySetLinkSpeed -phy0 2 -a0; for i in $(seq 48); do MegaCli -PhySetLinkSpeed -phy${i} 2 -a0; done and rebooting. The question remains: Is this typical for current 6 gb/s equipment? Is this the sad state of SATA storage? Or is some of my equipment (the sff-8088 cables come to mind) bad? The Problem was: Synchronizing HW RAID-6, disks kept offlining. Fetching SMART values reveiled that those which offlined did not increase powered-on hours anymore. That is, their firmware (CC4C) seems to crash. Digging into the matter by switching to Software RAID-6, with the disks passed-through, I got tons of kernel messages scattered across all disks, with 6 gb/s: sd 0:0:9:0: [sdb] Sense Key : No Sense [current] Info fld=0x0 sd 0:0:9:0: [sdb] Add. Sense: No additional sense information And finally, when a disk offlines: megasas: [ 5]waiting for 160 commands to complete ... megasas: [35]waiting for 159 commands to complete ... megasas: [155]waiting for 156 commands to complete ... megaraid_sas: pending commands remain after waiting, will reset adapter. Ugly controller reset here, then minutes later: megaraid_sas: Reset successful. sd 0:0:28:0: Device offlined - not ready after error recovery ... sd 0:0:28:0: [sdu] Unhandled error code sd 0:0:28:0: [sdu] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK sd 0:0:28:0: [sdu] CDB: Read(10): 28 00 23 21 2f 40 00 00 70 00 sd 0:0:28:0: [sdu] killing request Reduced speed to 3 gb/s like written above, all problems vanished.

    Read the article

  • Reading train stop display names from a resource bundle

    - by Frank Nimphius
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} In Oracle JDeveloper 11g R1, you set the display name of a train stop of an ADF bounded task flow train model by using the Oracle JDeveloper Structure Window. To do so Double-click onto the bounded task flow configuration file (XML) located in the Application Navigator so the task flow diagram open In the task flow diagram, select the view activity node for which you want to define the display name. In the Structure Window., expand the view activity node and then the train-stop node therein Add the display name element by using the right-click context menu on the train-stop node, selecting Insert inside train-stop > Display Name Edit the Display Name value with the Property Inspector Following the steps outlined above, you can define static display names – like "PF1" for page fragment 1 shown in the image below - for train stops to show at runtime. In the following, I explain how you can change the static display string to a dynamic string that reads the display label from a resource bundle so train stop labels can be internationalized. There are different strategies available for managing message bundles within an Oracle JDeveloper project. In this blog entry, I decided to build and configure the default properties file as indicated by the projects properties. To learn about the suggested file name and location, open the JDeveloper project properties (use a right mouse click on the project node in the Application Navigator and choose Project Properties. Select the Resource Bundle node to see the suggested name and location for the default message bundle. Note that this is the resource bundle that Oracle JDeveloper would automatically create when you assign a text resource to an ADF Faces component in a page. For the train stop display name, we need to create the message bundle manually as there is no context menu help available in Oracle JDeveloper. For this, use a right mouse click on the JDeveloper project and choose New | General | File from the menu and in the opened dialog. Specify the message bundle file name as the name looked up before in the project properties Resource Bundle option. Also, ensure that the file is saved in a directory structure that matches the package structure shown in the Resource Bundle dialog. For example, you would save the properties file in the View Project's src > adf > sample directory if the package structure was "adf.sample" (adf.sample.ViewControllerBundle). Edit the properties file and define key – values pairs for the train stop component. In the sample, such key value pairs are TrainStop1=Train Stop 1 TrainStop2=Train Stop 2 TrainStop3=Train Stop 3 Next, double click the faces-config.xml file and switch the opened editor to the Overview tab. Select the Application category and press the green plus icon next to the Resource Bundle section. Define the resource bundle Base Name as the package and properties file name, for example adf.sample.ViewControllerBundle Finally, define a variable name for the message bundle so the bundle can be accessed from Expression Language. For this blog example, the name is chosen as "messageBundle". <resource-bundle>   <base-name>adf.sample.ViewControllerBundle</base-name>   <var>messageBundle</var> </resource-bundle> Next, select the display-name element in the train stop node (similar to when creating the display name) and use the Property Inspector to change the static display string to an EL expression referencing the message bundle. For example: #{messageBundle.TrainStop1} At runtime, the train stops now show display names read from a message bundle (the properties file).

    Read the article

  • Find related field in Dynamics AX

    - by DAXShekhar
    static void findRelatedFieldId(Args _args) {     SysDictTable    dictTable = new SysDictTable(tablenum(InventTrans));     int             i,j;     SysDictRelation dictRelation;     TableId         externId = tablenum(SalesLine);     IndexId         indexId;     ; // Search the explicit relations     for (i = 1; i <= dictTable.relationCnt(); ++i)     {         dictRelation = new SysDictRelation(dictTable.id());         dictRelation.loadNameRelation(dictTable.relation(i)); // If it is a 'relation' then you use externTable(), but for extended data types you use table() (see next block).         if (SysDictRelation::externId(dictRelation) == externId)         {             for (j =1; j <= dictRelation.lines(); j++)             {                 info(strfmt("%1", dictRelation.lineExternTableValue(j)));                 info(fieldid2name(dictRelation.externTable(),dictRelation.lineExternTableValue(j)));             }         }     }     info(strfmt("%1", dictRelation.loadFieldRelation(fieldnum(InventTrans, InventTransId)))); }

    Read the article

  • How to configure networking on an appliance such that it can plug and play on any corporate network?

    - by Joshua Lim
    I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

    Read the article

  • What was the first consumer-oriented hardware/software solution?

    - by Maksee
    We all know the story of the personal computer as a consumer-oriented product. But I just thought that real end user solution should have appeared before that time. So a product that was probably expensive, but allowed using it as a service charging for it, for example computer-terminal for transport time-table access or game machine. On the other site, the video terminals as we know them appeared not so long ago. So if there was something like this, this could be hardware/software most likely offering no interactivity, but probably printing some information based on user actions.

    Read the article

  • Is it possible to provide a wired ethernet connection to external devices with an extra LAN card?

    - by Ben McCormack
    I'm trying to provide a wired ethernet connection (wireless is not an option for this device) to a device (Samsung blu-ray player) without running Cat5 cable all over the home. I have a PC sitting next to this device and the PC is connected to the network via a wireless USB adapter. Is it possible to provide a wired connection from the PC to the wired device using the (currently unused) ethernet port in the back of the computer? Here's how I envision the device getting connected to the internet via my network: Linksys WRT54G v8 Wireless Router | ``--> Windows 7 PC connected via wireless | ``--> Blu-ray player connected via wired connection to the ethernet port on the PC. If so, how is this done? Will I need a crossover cable? What settings will I need to change in Windows 7 so that the device can connect? NOTE: I'm trying to avoid having to buy a wireless bridge and/or hacking a router with an open-source firmware to get this to work. See my previous question for more details.

    Read the article

  • Polite busy-waiting with WRPAUSE on SPARC

    - by Dave
    Unbounded busy-waiting is an poor idea for user-space code, so we typically use spin-then-block strategies when, say, waiting for a lock to be released or some other event. If we're going to spin, even briefly, then we'd prefer to do so in a manner that minimizes performance degradation for other sibling logical processors ("strands") that share compute resources. We want to spin politely and refrain from impeding the progress and performance of other threads — ostensibly doing useful work and making progress — that run on the same core. On a SPARC T4, for instance, 8 strands will share a core, and that core has its own L1 cache and 2 pipelines. On x86 we have the PAUSE instruction, which, naively, can be thought of as a hardware "yield" operator which temporarily surrenders compute resources to threads on sibling strands. Of course this helps avoid intra-core performance interference. On the SPARC T2 our preferred busy-waiting idiom was "RD %CCR,%G0" which is a high-latency no-nop. The T4 provides a dedicated and extremely useful WRPAUSE instruction. The processor architecture manuals are the authoritative source, but briefly, WRPAUSE writes a cycle count into the the PAUSE register, which is ASR27. Barring interrupts, the processor then delays for the requested period. There's no need for the operating system to save the PAUSE register over context switches as it always resets to 0 on traps. Digressing briefly, if you use unbounded spinning then ultimately the kernel will preempt and deschedule your thread if there are other ready threads than are starving. But by using a spin-then-block strategy we can allow other ready threads to run without resorting to involuntary time-slicing, which operates on a long-ish time scale. Generally, that makes your application more responsive. In addition, by blocking voluntarily we give the operating system far more latitude regarding power management. Finally, I should note that while we have OS-level facilities like sched_yield() at our disposal, yielding almost never does what you'd want or naively expect. Returning to WRPAUSE, it's natural to ask how well it works. To help answer that question I wrote a very simple C/pthreads benchmark that launches 8 concurrent threads and binds those threads to processors 0..7. The processors are numbered geographically on the T4, so those threads will all be running on just one core. Unlike the SPARC T2, where logical CPUs 0,1,2 and 3 were assigned to the first pipeline, and CPUs 4,5,6 and 7 were assigned to the 2nd, there's no fixed mapping between CPUs and pipelines in the T4. And in some circumstances when the other 7 logical processors are idling quietly, it's possible for the remaining logical processor to leverage both pipelines. Some number T of the threads will iterate in a tight loop advancing a simple Marsaglia xor-shift pseudo-random number generator. T is a command-line argument. The main thread loops, reporting the aggregate number of PRNG steps performed collectively by those T threads in the last 10 second measurement interval. The other threads (there are 8-T of these) run in a loop busy-waiting concurrently with the T threads. We vary T between 1 and 8 threads, and report on various busy-waiting idioms. The values in the table are the aggregate number of PRNG steps completed by the set of T threads. The unit is millions of iterations per 10 seconds. For the "PRNG step" busy-waiting mode, the busy-waiting threads execute exactly the same code as the T worker threads. We can easily compute the average rate of progress for individual worker threads by dividing the aggregate score by the number of worker threads T. I should note that the PRNG steps are extremely cycle-heavy and access almost no memory, so arguably this microbenchmark is not as representative of "normal" code as it could be. And for the purposes of comparison I included a row in the table that reflects a waiting policy where the waiting threads call poll(NULL,0,1000) and block in the kernel. Obviously this isn't busy-waiting, but the data is interesting for reference. _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } _td { border: 1px green solid; } _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } Aggregate progress T = #worker threads Wait Mechanism for 8-T threadsT=1T=2T=3T=4T=5T=6T=7T=8 Park thread in poll() 32653347334833483348334833483348 no-op 415 831 124316482060249729303349 RD %ccr,%g0 "pause" 14262429269228623013316232553349 PRNG step 412 829 124616702092251029303348 WRPause(8000) 32443361333133483349334833483348 WRPause(4000) 32153308331533223347334833473348 WRPause(1000) 30853199322432513310334833483348 WRPause(500) 29173070315032223270330933483348 WRPause(250) 26942864294930773205338833483348 WRPause(100) 21552469262227902911321433303348

    Read the article

  • my wiki site using mediawiki - databases not found error

    - by Jayapal Chandran
    I had been using mediawiki opensource in my website to display programming articles. Today i tried to access my site but it showed database not found. Mediawiki uses many databases. When i logged in my control panel and checked i can see that most of the databases created by mediawiki is missing so is the reason i am getting this error. I have used mediawiki for two different purposes. It is like two modules. For one the databases are missing and for the other i think the data is corrupt. Do anybody know any issue with mediawiki security or would this be a problem with the webhosting cause we have faced several problems with them initially like before three years and recently the were good. Yet this happened. I have requested to hosting company to look into it and meanwhile i am expecting the help from stackexchange users. How do i check the logs for table deletion?

    Read the article

  • Specs, Form and Function – What am I Missing?

    - by Barry Shulam
    0 0 1 628 3586 08041 29 8 4206 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Friday October 26th the Microsoft Surface RT arrived at the office.  I was summoned to my boss’s office for the grand unpacking.  If I had planned ahead I could have used my iPhone 4 to film the event and post it on YouTube however the desire to hold the device and turn it ON was more inviting than becoming a proxy reviewer for Engadget’s website.  1980 was the first time we had a personal computer in our house.  It was a  Kaypro computer. It weighed 29 pounds more than any persons lap could hold.  Then the term “portable computer” meant you could remove it from the building and take it else where.  Today I am typing on this entry on a Macbook Air which weighs 2.38 pounds. This morning Amazons front page main title is: “Much More for Much Less” I was born at the right time to start with the CPM operating system on the Kaypro thru the DOS, Windows, Linux, Mac OSX and mobile phone operating systems and languages.  If you are not aware Technology is moving at a rapid pace.  The New iPad (those who are keeping score – iPad4) is replacing a 7 month old machine the New iPad (iPad 3) I have used and owned many technology devices in my life.  The main point that most of the reader who are in the USA overlook is the fact that we are in the USA.  The devices we purchase have a great digital garden to support them.  The Kaypro computer had a 7-inch screen.  It was a TV tube with two colors – Black and Green.  You could see the 80-column screen flicker with characters – have you every played Pac-Man emulated on the screen with the ABC characters. Traveling across the world you will find that not all apps on your device will function as they did back home because they are not offered outside of your country of origin. I think the main question a buyer of technology should be asking is Function.  The greatest Specs with out function limit you.  The most beautiful form with out function is the same as a crystal vase on your shelf – not a good cereal bowl in the morning. Microsoft Surface RT, Amazon Kindle Fire and Apple iPad all great devices in their respective customers hands. My advice for those looking to purchase on this year:  If the device is your only technology device you buy what you WANT and LIKE. Consider this parallel universe if its not your only device?  Ever go shopping for clothing, shoes, and accessories with your wife, girlfriend, sister or mother?  If you listen carefully you will hear the little voices coming out of there heads saying:  “This goes well with that and I can use it also with that outfit” ”Do you think this clashes with that?”  “Ohh I love how that combination looks on you”.  Portable devices such as tablets and computers can offer a whole lot more when they are combined with the digital echo system you have at home and the manufacturer offers online. Pros of each Device: Microsoft Surface RT: There is a new functionality named SmartGlass which will let you share the content off your tablet to your XBOX 360.  Microsoft office is loaded on the tablet.  You can have more than one user profile on the tablet if you share it with others.   Amazon Kindle or Kindle HD: If you are an Amazon consumer with an annual Amazon Prime service you can consume videos and read books off the Amazon site.  Its the cheapest device.  Its a step up from the kindle reader in many ways.   Apple Ipad or Ipad mini: Over 270 Thousand applications.  Airplay permits you the ability to share to your TV screen. If you are a cord cutter (a person who gets their entertainment content over the web or air vs Cable Providers) the Airplay or Smart glass are a huge bonus.  iPad mini or not: The mini will fit in a purse where the larger one will not.  Its lighter which makes it nice to hold for prolonged periods.  It has an option for LTE wireless which non of the other sub 9 inch tables offer.  The screen is non retina which means the applications are smaller.  Speaking with individuals who are above 50 in age that wear glasses they retina does not make a difference for them however they prefer the larger iPad over the new mini.   Happy Shopping this Channuka Season.   The Kosher Coder.   Follow me on twitter @KosherCoder

    Read the article

  • Oracle OpenWorld Preview: Let's Get Social and Interactive

    - by Christie Flanagan
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} On this blog, we often write about getting social and interactive.  Usually, we’re talking about how to create a social business or how to make the customer experience more social and interactive.  Today’s topic is about getting social and interactive as well. But this time we’re talking about getting social and interactive the old fashioned way, face-to-face at Oracle OpenWorld with fellow Oracle WebCenter customers, partners and experts and the broader Oracle community.  Here are some great ways to get social at OpenWorld outside of the exhibition halls and meeting rooms: Oracle OpenWorld Welcome Reception - Sponsored by FujitsuSunday, September 30, 7:00 p.m.–8:30 p.m.Yerba Buena Gardens & Howard Street Tent You’ll definitely want to attend the Opening Ceremonies for Oracle OpenWorld 2012 on Sunday, September 30. Centered in Yerba Buena Gardens (YBG) and shimmying out to other venues, the Opening Ceremonies are not to be missed. Join other attendees for great food and drink, energizing music, networking opportunities, and more. While you’re at YBG (home of ORACLE TEAM USA’s America’s Cup Pavilion), be sure to meet the sailors who will be defending the 34th America’s Cup in 2013. Get a good look at the 161-year old Trophy itself—the oldest trophy still being contested in international sport. And at the AC72 boat display, view a model of the largest wingsail ever built. Oracle WebCenter Customer Appreciation ReceptionTuesday, October 2, 6:30 p.m.—9:30 p.m.The Palace Hotel, Rallston BallroomThose Oracle WebCenter customers who’ve RSVP’d to attend the Oracle WebCenter Customer Appreciation Reception shouldn’t miss this private cocktail reception at one of San Francisco’s finest hotels. Sponsored by Oracle WebCenter partners Fishbowl Solutions, Fujitsu, Keste, Mythics, Redstone Content Solutions, TEAM Informatics, and TekStream, this evening will provide plenty of time to interact with other WebCenter customers, partners and employees over hors d'oeuvres and cocktails. Oracle Appreciation Event – Sponsored by CSC, Fujitsu and IntelWednesday, October 3, 7:30 p.m.—1:00 a.m.Treasure Island, San Francisco On Wednesday night October 3, Treasure Island will be engineered to rock as the Oracle Appreciation Event gets revved up and attendees get rolling. As always at the Oracle Appreciation Event, there will be unlimited refreshments, fun and games, the most awesome views of San Francisco from just about anywhere, and top notch entertainment.  Past performers read like a veritable who’s who of the rock and roll elite. Join us—it's our way of saying thanks to you for supporting Oracle and our flagship conference. Complimentary shuttle service to and from Treasure Island will be provided, so all you have to worry about is having a rocking night of your own. Oracle OpenWorld Music FestivalSeptember 30-October 4, Check schedule for venues and times.Oracle presents the first annual Oracle OpenWorld Musical Festival, featuring some of today’s breakthrough musicians from around the country and the world including Macy Gray, Joss Stone, Jimmy Cliff and The Hives. It’s five nights of back-to-back performances in the heart of San Francisco. Registered Oracle conference attendees get free admission, so remember your badge when you head to a show. With limited space at some venues, these concerts are first-come, first-served. So mark your calendars and get ready for the music to begin. See you there!I hope this give you an idea of the many opportunities to socialize and interact with the Oracle community at OpenWorld, and if you’re a music lover like me, you’re in for a special treat as we debut our first annual Oracle OpenWorld Music Festival.  Check out the links below for more information on these events and the many featured performers: Reflections from the Young Prisms A Brief Soul Session with Joss Stone Mixing It Up with Blues Mix Red Meat’s Music is Rare and Well Done The English Beat’s Dave Wakeling Gets Philosophical Top Ten Reasons to Attend the Oracle Appreciation Event There’s Magic in the Air, There’ll Be Music Everywhere Looking forward to seeing you at OpenWorld!

    Read the article

  • The Unintended Consequences of Sound Security Policy

    - by Tanu Sood
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Author: Kevin Moulton, CISSP, CISM Meet the Author: Kevin Moulton, Senior Sales Consulting Manager, Oracle Kevin Moulton, CISSP, CISM, has been in the security space for more than 25 years, and with Oracle for 7 years. He manages the East Enterprise Security Sales Consulting Team. He is also a Distinguished Toastmaster. Follow Kevin on Twitter at twitter.com/kevin_moulton, where he sometimes tweets about security, but might also tweet about running, beer, food, baseball, football, good books, or whatever else grabs his attention. Kevin will be a regular contributor to this blog so stay tuned for more posts from him. When I speak to a room of IT administrators, I like to begin by asking them if they have implemented a complex password policy. Generally, they all nod their heads enthusiastically. I ask them if that password policy requires long passwords. More nodding. I ask if that policy requires upper and lower case letters – faster nodding – numbers – even faster – special characters – enthusiastic nodding all around! I then ask them if their policy also includes a requirement for users to regularly change their passwords. Now we have smiles with the nodding! I ask them if the users have different IDs and passwords on the many systems that they have access to. Of course! I then ask them if, when they walk around the building, they see something like this: Thanks to Jake Ludington for the nice example. Can these administrators be faulted for their policies? Probably not but, in the end, end-users will find a way to get their job done efficiently. Post-It Notes to the rescue! I was visiting a business in New York City one day which was a perfect example of this problem. First I walked up to the security desk and told them where I was headed. They asked me if they should call upstairs to have someone escort me. Is that my call? Is that policy? I said that I knew where I was going, so they let me go. Having the conference room number handy, I wandered around the place in a search of my destination. As I walked around, unescorted, I noticed the post-it note problem in abundance. Had I been so inclined, I could have logged in on almost any machine and into any number of systems. When I reached my intended conference room, I mentioned my post-it note observation to the two gentlemen with whom I was meeting. One of them said, “You mean like this,” and he produced a post it note full of login IDs and passwords from his breast pocket! I gave him kudos for not hanging the list on his monitor. We then talked for the rest of the meeting about the difficulties faced by the employees due to the security policies. These policies, although well-intended, made life very difficult for the end-users. Most users had access to 8 to 12 systems, and the passwords for each expired at a different times. The post-it note solution was understandable. Who could remember even half of them? What could this customer have done differently? I am a fan of using a provisioning system, such as Oracle Identity Manager, to manage all of the target systems. With OIM, and email could be automatically sent to all users when it was time to change their password. The end-users would follow a link to change their password on a web page, and then OIM would propagate that password out to all of the systems that the user had access to, even if the login IDs were different. Another option would be an Enterprise Single-Sign On Solution. With Oracle eSSO, all of a user’s credentials would be stored in a central, encrypted credential store. The end-user would only have to login to their machine each morning and then, as they moved to each new system, Oracle eSSO would supply the credentials. Good-bye post-it notes! 3M may be disappointed, but your end users will thank you. I hear people say that this post-it note problem is not a big deal, because the only people who would see the passwords are fellow employees. Do you really know who is walking around your building? What are the password policies in your business? How do the end-users respond?

    Read the article

  • Disabling Keyboard Wakeup for Ubuntu 10.04 on Acer 1810TZ

    - by sybreon
    My Acer Aspire 1810TZ laptop suspends fine but wakes up on any slight key-press. I would like to disable this behaviour. I read that it involves disabling something in the /proc/acpi/wakeup but SLPB does not seem to be listed at all. root@1810TZ:/etc# cat /proc/acpi/wakeup Device S-state Status Sysfs node UHC0 S3 disabled pci:0000:00:1d.0 UHC1 S3 disabled pci:0000:00:1d.1 UHC2 S3 disabled pci:0000:00:1d.2 UHCR S3 disabled EHC1 S3 disabled pci:0000:00:1d.7 UHC3 S3 disabled pci:0000:00:1a.0 UHC4 S3 disabled UHC5 S3 disabled EHC2 S3 disabled pci:0000:00:1a.7 EXP1 S4 disabled pci:0000:00:1c.0 PXSX S4 disabled pci:0000:01:00.0 EXP2 S4 disabled PXSX S4 disabled EXP3 S4 disabled PXSX S4 disabled EXP4 S4 disabled pci:0000:00:1c.3 PXSX S4 disabled pci:0000:02:00.0 EXP5 S4 disabled PXSX S4 disabled EXP6 S4 disabled PXSX S4 disabled However, the relevant bits seem to be detected from dmesg. [ 0.357628] ACPI: AC Adapter [ACAD] (on-line) [ 0.357749] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.357754] ACPI: Power Button [PWRB] [ 0.357817] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.359319] ACPI: Lid Switch [LID0] [ 0.359390] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.359394] ACPI: Sleep Button [SLPB] [ 0.359475] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.359479] ACPI: Power Button [PWRF] Not quite sure what to do next.

    Read the article

  • Changing the Game: Why Oracle is in the IT Operations Management Business

    - by DanKoloski
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Next week, in Orlando, is the annual Gartner IT Operations Management Summit. Oracle is a premier sponsor of this annual event, which brings together IT executives for several days of high level talks about the state of operational management of enterprise IT. This year, Sushil Kumar, VP Product Strategy and Business Development for Oracle’s Systems & Applications Management, will be presenting on the transformation in IT Operations required to support enterprise cloud computing. IT Operations transformation is an important subject, because year after year, we hear essentially the same refrain – large enterprises spend an average of two-thirds (67%!) of their IT resources (budget, energy, time, people, etc.) on running the business, with far too little left over to spend on growing and transforming the business (which is what the business actually needs and wants). In the thirtieth year of the distributed computing revolution (give or take, depending on how you count it), it’s amazing that we have still not moved the needle on the single biggest component of enterprise IT resource utilization. Oracle is in the IT Operations Management business because when management is engineered together with the technology under management, the resulting efficiency gains can be truly staggering. To put it simply – what if you could turn that 67% of IT resources spent on running the business into 50%? Or 40%? Imagine what you could do with those resources. It’s now not just possible, but happening. This seems like a simple idea, but it is a radical change from “business as usual” in enterprise IT Operations. For the last thirty years, management has been a bolted-on afterthought – we pick and deploy our technology, then figure out how to manage it. This pervasive dysfunction is a broken cycle that guarantees high ongoing operating costs and low agility. If we want to break the cycle, we need to take a more tightly-coupled approach. As a complete applications-to-disk platform provider, Oracle is engineering management together with technology across our stack and hooking that on-premise management up live to My Oracle Support. Let’s examine the results with just one piece of the Oracle stack – the Oracle Database. Oracle began this journey with the Oracle Database 9i many years ago with the introduction of low-impact instrumentation in the database kernel (“tell me what’s wrong”) and through Database 10g, 11g and 11gR2 has successively added integrated advisory (“tell me how to fix what’s wrong”) and lifecycle management and automated self-tuning (“fix it for me, and do it on an ongoing basis for all my assets”). When enterprises take advantage of this tight-coupling, the results are game-changing. Consider the following (for a full list of public references, visit this link): British Telecom improved database provisioning time 1000% (from weeks to minutes) which allows them to provide a new DBaaS service to their internal customers with no additional resources Cerner Corporation Saved $9.5 million in CapEx and OpEx AND launched a brand-new cloud business at the same time Vodafone Group plc improved response times 50% and reduced maintenance planning times 50-60% while serving 391 million registered mobile customers Or the recent Database Manageability and Productivity Cost Comparisons: Oracle Database 11g Release 2 vs. SAP Sybase ASE 15.7, Microsoft SQL Server 2008 R2 and IBM DB2 9.7 as conducted by independent analyst firm ORC. In later entries, we’ll discuss similar results across other portions of the Oracle stack and how these efficiency gains are required to achieve the agility benefits of Enterprise Cloud. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • What's the best way to manage list item sort order with Drag & Drop UI?

    - by Reddy S R
    I have a list of Students that I should display to user on a web page in tabular format. The items are stored in DB along with SortOrder information. On the web page, user can rearrange the list order by dragging and dropping the items to their desired sort order, similar to this post. Below is a screenshot of my test page. In the above example, each row has sort order info attached to it. When I drop John Doe (Student Id 10) above the Student Id 1 row, the list order should now be: 2, 10, 1, 8, 11. What's the optimistic (less resource hungry) way to store and update Sort Order information? My only idea for now is, for every change in the list's sort order, every object's SortOrder value should be updated, which in my opinion is very resource hungry. Just FYI: I might have at most 25 rows in my table.

    Read the article

< Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >