Search Results

Search found 17336 results on 694 pages for 'developer events'.

Page 668/694 | < Previous Page | 664 665 666 667 668 669 670 671 672 673 674 675  | Next Page >

  • Slow Jquery Animation

    - by Pyronaut
    I have this webpage : http://miloarc.pyrogenicmedia.com/ Which atm is nothing special. It has a few effects but none that break the bank. If you mouse over a tile, it should change it's opacity to give it a fade effect. This is done through the Jquery Animation, not through CSS (I do this so it can fade, instead of being a straight change). Everything looks nice when the page loads, and the fades look perfect. Infact if you drag your mouse all over the place, if gives you a "trail" almost like a snake. Anyway, My next problem is that you will see there is a box in the top left, which is going to tell you information about the tile you are hovering over. This seems to work fine. When you mouse over that information box, it switches it's position (So that you can reach the tiles that were previously hidden underneath it). From my understanding, this is all working fine, and to the letter. However, After one move of the info box (One hover). Viewing the page in Firefox turns slugish. As in, after a successful move of the info box, the fade effects become very stuttered, and it doesn't pick up events as fast meaning you can't draw a "trail" on the screen. Chrome doesn't have this issue. It seems to work fine no matter what. Safari also seems ok. Although I do notice if I move my mouse really fast, it does jump a bit but not as much as firefox. Internet explorer doesn't work at all. Seems to crash the browser... And there is an error with the rounded corner plugin im using (Not sure why...). All in all, I think whatever I'm doing inside my code must be heavily sluggish. But I don't know where it is happening. Here is the full code, but I would advise go to the link to view everything. <script type="text/javascript"> $(document).ready(function() { var WindowWidth = $(window).width(); var WindowMod = WindowWidth % 20; var WindowWidth = WindowWidth - WindowMod; var BoxDimension = WindowWidth / 20; var BoxDimensionFixed = BoxDimension - 12; var dimensions = BoxDimensionFixed + 'px'; $('.gamebutton').each(function(i) { $(this).css('width', dimensions); $(this).css('height', dimensions); }); var OuterDivHeight = BoxDimension * 10; var TopMargin = ($(window).height() - OuterDivHeight) / 2; var OuterDivWidth = BoxDimension * 20; var LeftMargin = ($(window).width() - OuterDivWidth) / 2; $('#gamePort').css('margin-top', TopMargin).css('margin-left', LeftMargin).css('margin-right', LeftMargin); $('.gamebutton img').each(function(i) { $(this).hover( function () { $(this).animate({'opacity': 0.65}); }, function () { $(this).animate({'opacity': 1}); } ); }); $('.rounded').corners(); $('.gamebutton').each(function(i) { $(this).hover(function() { $('.gameTitlePopup').html($(this).attr('title')); FadeActive(); }); }); function FadeActive() { $('.activeInfo').fadeIn('slow'); } $('#gameInfoLeft').hover(function() { $(this).removeClass('activeInfo'); $(this).fadeOut('slow', function() { $('#gameInfoRight').addClass('activeInfo'); FadeActive(); }); }); $('#gameInfoRight').hover(function() { $(this).removeClass('activeInfo'); $(this).fadeOut('slow', function() { $('#gameInfoLeft').addClass('activeInfo'); FadeActive(); }); }); }); </script> Thanks for any help :).

    Read the article

  • Can you Download the cmid.ctt File

    - by ArtistDigital
    Can you Download the cmid.ctt File Zong.com.pk http://203.82.55.30/websms/default.aspx?txt_Msg=your-name&txt_MNumber=033489667417&txt_Nick=your-name Still Waiting for Reply.... kindly more Developer to broke the Server expection function alphanumeric(alphane) { var numaric = alphane; for(var j=0; j 47 && hh<59) || (hh 64 && hh<91) || (hh 96 && hh<123)) { } else { return false; } } return true; } function charscount(msg, frm) { frm.num_chars.value = 147 - msg.length; // m = msg; } function moveDivDown() { var el = document.getElementById("chatwindow") st = el.scrollTop; el.scrollTop = el.scrollTop + 300 } function trim(str) { return str.replace(/^\s*|\s*$/g,""); } var XMLHttp; var XMLHttp2; /SEND TO SERVER/ function GetXmlHttpObject() { var objXMLHttp=null /* if (window.XMLHttpRequest) { objXMLHttp=new XMLHttpRequest() } else if (window.ActiveXObject) { objXMLHttp=new ActiveXObject("Microsoft.XMLHTTP") }*/ var ua = navigator.userAgent.toLowerCase(); if (!window.ActiveXObject) objXMLHttp = new XMLHttpRequest(); else if (ua.indexOf('msie 5') == -1) objXMLHttp = new ActiveXObject("Msxml2.XMLHTTP"); else objXMLHttp = new ActiveXObject("Microsoft.XMLHTTP"); return objXMLHttp } function updateChatWindow() { var txt_Msg, txt_mNumber, txt_Nick, myMessage txt_MNumber = document.getElementById("txt_MNumber").value txt_Msg = document.getElementById("txt_Msg").value txt_Nick = document.getElementById("txt_Nick").value txt_Nick = trim (txt_Nick) if (txt_Nick.length==0) { alert ("Please enter the Nick Name") document.getElementById("txt_Nick").focus() document.getElementById("txt_Nick").value="" return false; } if (!alphanumeric(txt_Nick)) { alert ("Please enter a valid alphanumeric Nick Name") document.getElementById("txt_Nick").value="" document.getElementById("txt_Nick").focus() return false; } if (txt_Msg.length==0) return false; if (txt_MNumber.length != 10) { alert ("Please Enter a 10 digit recipient mobile number") return false } if (!IsNumeric (txt_MNumber)) { alert ("Please Enter a valid 10 digit recipient mobile number") return false } document.getElementById("txt_Msg").value = "" document.getElementById("num_chars").value = "147" document.getElementById("txt_Msg").focus() myMessage = '' +txt_Nick + ' Says: ' + txt_Msg + '' document.getElementById("chatwindow").innerHTML= document.getElementById("chatwindow").innerHTML + myMessage moveDivDown() XMLHttp = GetXmlHttpObject() if (XMLHttp==null) { alert ("Browser does not support HTTP Request") return false; } var url="default.aspx?" url=url+"txt_Msg="+txt_Msg url=url+"&txt_MNumber="+txt_MNumber url=url+"&txt_Nick="+txt_Nick url=url+"&sid="+Math.random() XMLHttp.onreadystatechange=stateChanged XMLHttp.open("GET",url,true) XMLHttp.send(null) return false; } function stateChanged() { if (XMLHttp.readyState==4 || XMLHttp.readyState=="complete") { try { document.getElementById("chatwindow").innerHTML= document.getElementById("chatwindow").innerHTML+ XMLHttp.responseText moveDivDown() } catch (e){} } } /RECEIVE FROM SERVER/ function checkResponse() { XMLHttp2 = GetXmlHttpObject() if (XMLHttp2==null) { alert ("Browser does not support HTTP Request") return } var url="" url=url+"?r=C" url=url+"&sid="+Math.random() XMLHttp2.onreadystatechange=stateChanged2 XMLHttp2.open("GET",url,true) XMLHttp2.send(null) } function stateChanged2() { if (XMLHttp2.readyState==4 || XMLHttp2.readyState=="complete") { try { document.getElementById("chatwindow").innerHTML= document.getElementById("chatwindow").innerHTML + XMLHttp2.responseText moveDivDown() } catch (e){} //Again Check Updates after 3 Seconds setTimeout("checkResponse()", 2000); } } function IsNumeric(sText) { var ValidChars = "0123456789"; var IsNumber=true; var Char; for (i = 0; i < sText.length && IsNumber == true; i++) { Char = sText.charAt(i); if (ValidChars.indexOf(Char) == -1) { IsNumber = false; } } return IsNumber; }

    Read the article

  • Windows NT Service shutdown issues

    - by Jeremiah Gowdy
    I have developed middleware that provides RPC functionality to multiple client applications on multiple platforms within our organization. The middleware is written in C# and runs as a Windows NT Service. It handles things like file access to network shares, database access, etc. The middleware is hosted on two high end systems running Windows Server 2008 R2. When one of our server administrators goes to reboot the machine, primarily to do Windows Updates, there are serious problems with how the system behaves in regards to my NT Service. My service is designed to immediately stop listening for new connections, immediately start refusing new requests on existing connections, and otherwise shut down as rapidly as possible in the case of an OnStop or OnShutdown request from the SCM. Still, to maintain system integrity, operations that are currently in progress are allowed to continue for a reasonable time. Usually the server shuts down inside of 30 seconds (when the service is manually stopped for example). However, when the system is instructed to restart, my service immediately loses access to network drives and UNC paths, causing data integrity problems for any open files and partial writes to those locations. My service does list Workstation (and thus SMB Redirector) as a dependency, so I would think that my service would need to be stopped prior to Workstation/Redirector being stopped if Windows were honoring those dependencies. Basically, my application is forced to crash and burn, failing remote procedure calls and eventually being forced to terminate by the operating system after a timeout period has elapsed (seems to be on the order of 20-30 seconds). Unlike a Windows application, my Windows NT Service doesn't seem to have any power to stop a system shutdown in progress, delay the system shutdown, or even just the opportunity to save out any pending network share disk writes before being forcibly disconnected and shutdown. How is an NT Service developer supposed to have any kind of application integrity in this environment? Why is it that Forms Applications get all of the opportunity to finish their business prior to shutdown, while services seem to get no such benefits? I have tried: Calling SetProcessShutdownParameters via p/invoke to try to notify my application of the shutdown sooner to avoid Redirector shutting down before I do. Calling ServiceBase.RequestAdditionalTime with a value less than or equal to the two minute limit. Tweaking the WaitToKillServiceTimeout Everything I can think of to make my service shutdown faster. But in the end, I still get ~30 seconds of problematic time in which my service doesn't even seem to have been notified of an OnShutdown event yet, but requests are failing due to redirector no longer servicing my network share requests. How is this issue meant to be resolved? What can I do to delay or stop the shutdown, or at least be allowed to shut down my active tasks without Redirector services disappearing out from under me? I can understand what Microsoft is trying to do to prevent services from dragging their feet and showing shutdowns, but that seems like a great goal for Windows client operating systems, not for servers. I don't want my servers to shutdown fast, I want operational integrity and graceful shutdowns. Thanks in advance for any help you can provide. PS in regards to writing my own middleware, this is for a telephony application with sub-second "soft-realtime" response time requirements. It does make sense, and it's not a point I'm looking to debate. :)

    Read the article

  • iPhone dev - viewDidUnload subviews

    - by Mk12
    I'm having a hard time undestand a couple of the methods in UIViewController, but first I'll say what I think they are meant for (ignoring interface builder because I'm not using it): -init: initialize non view-related stuff that won't need to be released in low memory situations (i.e. not objects or objects that can't be recreated easily). -loadView: create the view set the [self view] property. -viewDidLoad: Create all the other view elements -viewDidUnload: Release objects created in -viewDidLoad. didReceiveMemoryWarning: Low-memory situation, release unnecessary things such as cached data, if this view doesn't have a superview then the [super didReceiveMemoryWarning] will go on to release (unload) the view and call -viewDidUnload. -dealloc: release everything -viewWillAppear:, -viewDidAppear:, -viewWillDisappear:, -viewDidDisappear: self-explanatory, not necessary unless you want to respond (do something) to those events. I'm not sure about a couple of things. First, the Apple docs say that when -viewDidUnload is called, the view has already been released and set to nil. Will -loadView get called again to recreate the view later on? There's a few things I created in -viewDidLoad that I didn't make a ivar/property for because there is no need and it will be retained by the view (because they are subviews of it). So when the view is released, it will release those too, right? When the view is released, will it release all its subviews? Because all the objects I created in -viewDidLoad are subviews of [self view]. So if they already get released why release them again in -viewDidUnload? I can understand data that is necessary when the view is visible being loaded and unloaded in these methods, but like I asked, why release the subviews if they already get released? EDIT: After reading other questions, I think I might have got it (my 2nd question). In the situation where I just use a local variable, alloc it, make it a subview and release, it will have a retain count of 1 (from adding it as a subview), so when the view is released it is too. Now for the view elements with ivars pointing to them, I wasn't using properties because no outside class would need to access them. But now I think that that's wrong, because in this situation: // MyViewController.h @interface MyViewController : UIViewController { UILabel *myLabel; } // MyViewController.m . . . - (void)viewDidLoad { myLabel = [[UILabel alloc] initWithFrame:CGRectMake(0, 0, 40, 10)]; [myLabel setText:@"Foobar"]; [[self view] addSubview:myLabel]; } - (void)viewDidUnload [ // equivalent of [self setMyLabel:nil]; without properties [myLabel release]; myLabel = nil; } In that situation, the label will be sent the -release message after it was deallocated because the ivar didn't retain it (because it wasn't a property). But with a property the retain count would be two: the view retaining it and the property. So then in -viewDidUnload it will get deallocated. So its best to just always use properties for these things, am I right? Or not? EDIT: I read somewhere that -viewDidLoad and -viewDidUnload are only for use with Interface Builder, that if you are doing everything programmatically you shouldn't use them. Is that right? Why?

    Read the article

  • problem to genrate swf file.

    - by nemade-vipin
    hello friend I have created one flex Air application where I have created the one authentication actionscript class. and one mxml file.This complete application using webservice and google map API. but when I am building application it is not genrating the SWF file in bin-debug folder. that is changes not reflecting in our application. my code is:- Action script class is :- package src { import adobe.utils.XMLUI; import mx.rpc.events.FaultEvent; import mx.controls.Alert; import generated.webservices.*; import mx.collections.ArrayCollection; public class Authentication { [Bindable] private var childName:ArrayCollection; [Bindable] private var childId:ArrayCollection; private var photoFeed:ArrayCollection; private var arrayOfchild:Array; private var newEntry:GetSBTSMobileAuthentication; public function authentication():void { // Instantiate a new Entry object. user = new SBTSWebService(); if(user!=null) { user.addSBTSWebServiceFaultEventListener(handleFaults); user.addgetSBTSMobileAuthenticationEventListener(authenticationResult); newEntry = new GetSBTSMobileAuthentication(); if(newEntry!=null) { newEntry.mobile=mobileno.text; newEntry.password=password.text; user.getSBTSMobileAuthentication(newEntry); } } } public function handleFaults(event:FaultEvent):void { Alert.show("A fault occured contacting the server. Fault message is: " + event.fault.faultString); } public function authenticationResult(event:GetSBTSMobileAuthenticationResultEvent):void { if(event.result != null && event.result._return>0) { if(event.result._return > 0) { var UserId:int = event.result._return; loginform.enabled = false; //getChildList(UserId); viewstack2.selectedIndex=1; } else { Alert.show("Authentication fail"); } } } } } mxml file is :- import src.Authentication; var user:Authentication = new Authentication(); ]]> <mx:TabNavigator id="viewstack2" selectedIndex="0" creationPolicy="all" width="100%" height="100%"> <mx:Form label="Login Form" id="loginform"> <mx:FormItem label="Mobile NO:"> <mx:TextInput id="mobileno"/> </mx:FormItem> <mx:FormItem label="Password:"> <mx:TextInput displayAsPassword="true" id="password" /> </mx:FormItem> <mx:FormItem> <mx:Button label="Login" click="user.authentication()"/> </mx:FormItem> </mx:Form> <mx:Form label="Child List"> <mx:Label width="100%" color="blue" text="Select Child."/> </mx:Form> <mx:Form label="Child Information"> </mx:Form> <mx:Form label="Bus Location"> </mx:Form> <mx:Form label="Bus path"> </mx:Form> </mx:TabNavigator> </mx:Panel>

    Read the article

  • Problem with the dateformatter's in Iphone sdk.

    - by monish
    Hi guys, Here I had a problem with the date formatters actually I had an option to search events based on the date.for this Im comparing the date with the date store in the database and getting the event based on the date for this I wrote the code as follows: -(NSMutableArray*)getSearchAllLists:(EventsList*)aEvent { [searchList removeAllObjects]; EventsList *searchEvent = nil; const char* sql; NSString *conditionStr = @" where "; if([aEvent.eventName length] > 0) { NSString *str = @"'%"; str = [str stringByAppendingString:aEvent.eventName]; str = [str stringByAppendingString:@"%'"]; conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@" eventName like %s",[str UTF8String]]]; } if([aEvent.eventWineName length]>0) { NSString *str = @"'%"; str = [str stringByAppendingString:aEvent.eventWineName]; str = [str stringByAppendingString:@"%'"]; if([aEvent.eventName length]>0) { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@" and (wineName like %s)",[str UTF8String]]]; } else { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@"wineName like %s",[str UTF8String]]]; } } if([aEvent.eventVariety length]>0) { NSString *str = @"'%"; str = [str stringByAppendingString:aEvent.eventVariety]; str = [str stringByAppendingString:@"%'"]; if([aEvent.eventName length]>0 || [aEvent.eventWineName length]>0) { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@" and (variety like %s)",[str UTF8String]]]; } else { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@"variety like %s" ,[str UTF8String]]]; } } if([aEvent.eventWinery length]>0) { NSString *str = @"'%"; str = [str stringByAppendingString:aEvent.eventWinery]; str = [str stringByAppendingString:@"%'"]; if([aEvent.eventName length]>0 || [aEvent.eventWineName length]>0 || [aEvent.eventVariety length]>0) { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@" and (winery like %s)",[str UTF8String]]]; } else { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@"winery like %s" ,[str UTF8String]]]; } } if(aEvent.eventRatings >0) { if([aEvent.eventName length]>0 || [aEvent.eventWineName length]>0 || [aEvent.eventWinery length]>0 || [aEvent.eventVariety length]>0) { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@" and ratings = %d",aEvent.eventRatings]]; } else { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@" ratings = %d",aEvent.eventRatings]]; } } if(aEvent.eventDate >0) { NSDateFormatter *dateFormatter = [[NSDateFormatter alloc]init]; [dateFormatter setDateFormat:@"dd-MMM-yy 23:59:59"]; NSString *dateStr = [dateFormatter stringFromDate:aEvent.eventDate]; NSDate *date = [dateFormatter dateFromString:dateStr]; [dateFormatter release]; NSTimeInterval interval = [date timeIntervalSinceReferenceDate]; printf("\n Interval in advance search:%f",interval); if([aEvent.eventName length]>0 || [aEvent.eventWineName length]>0 || [aEvent.eventWinery length]>0 || aEvent.eventRatings>0 || [aEvent.eventVariety length]>0) { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@" and eventDate = %f",interval]]; } else { conditionStr = [conditionStr stringByAppendingString:[NSString stringWithFormat:@" eventDate = %f",interval]]; } } NSString* queryString= @" select * from event"; queryString = [queryString stringByAppendingString:conditionStr]; sqlite3_stmt* statement; sql = (char*)[queryString UTF8String]; if (sqlite3_prepare_v2(database, sql, -1, &statement, NULL) != SQLITE_OK) { NSAssert1(0, @"Error: failed to prepare statement with message '%s'.", sqlite3_errmsg(database)); } sqlite3_bind_text(statement, 1, [aEvent.eventName UTF8String], -1, SQLITE_TRANSIENT); sqlite3_bind_text(statement, 2, [aEvent.eventWineName UTF8String], -1, SQLITE_TRANSIENT); sqlite3_bind_text(statement, 3, [aEvent.eventVariety UTF8String], -1, SQLITE_TRANSIENT); sqlite3_bind_text(statement, 4, [aEvent.eventWinery UTF8String], -1, SQLITE_TRANSIENT); sqlite3_bind_int(statement, 5,aEvent.eventRatings); sqlite3_bind_double(statement,6, [[aEvent eventDate] timeIntervalSinceReferenceDate]); while (sqlite3_step(statement) == SQLITE_ROW) { primaryKey = sqlite3_column_int(statement, 0); searchEvent = [[EventsList alloc] initWithPrimaryKey:primaryKey database:database]; [searchList addObject:searchEvent]; [searchEvent release]; } sqlite3_finalize(statement); return searchList; } Here I compared the interval value in the database and the date we are searching and Im getting the different values and results were not found. Guy's help me to get rid of this. Anyone's help will be much appreciated. Thank you Monish Calapatapu.

    Read the article

  • Oracle Unicode problem when using NLS_CHARACTERSET is WE8ISO8859P1 and NLS_NCHAR_CHARACTERSET is AL16UTF16, and ColdFusion as programming language

    - by tsurahman
    I have 2 Oracle 10g database, XE and Enterprise XE Enterprise and this are the data type I've use in the test table and then I tried to test to insert some Unicode char from http://www.sustainablegis.com/unicode/ and the results are XE Enterprise for this test, I use ColdFusion 9 developer edition <cfprocessingDirective pageencoding="utf-8"> <cfset setEncoding("form","utf-8")> <form action="" method="post"> Unicode : <br> <textarea name="txaUnicode" id="txaUnicode" cols="50" rows="10"></textarea> <br><br> Language : <br> <input type="Text" name="txtLanguage" id="txtLanguage"> <br><br> <input type="Submit"> </form> <cfset dsn = "theDSN"> <cfif StructKeyExists(FORM, "FIELDNAMES")> <cfquery name="qryInsert" datasource="#dsn#"> INSERT INTO UNICODE ( C_VARCHAR2, C_CHAR, C_CLOB, C_NVARCHAR2, LANGUAGE ) VALUES ( <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#FORM.TXAUNICODE#">, <cfqueryparam cfsqltype="CF_SQL_CHAR" value="#FORM.TXAUNICODE#">, <cfqueryparam cfsqltype="CF_SQL_LONGVARCHAR" value="#FORM.TXAUNICODE#">, <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#FORM.TXAUNICODE#">, <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#FORM.TXTLANGUAGE#"> ) </cfquery> </cfif> <cfquery name="qryUnicode" datasource="#dsn#"> SELECT * FROM UNICODE ORDER BY LANGUAGE </cfquery> <table border="1"> <thead> <tr> <th>LANGUAGE</th> <th>C_VARCHAR2</th> <th>C_CHAR</th> <th>C_CLOB</th> <th>C_NVARCHAR2</th> </tr> </thead> <tbody> <cfoutput query="qryUnicode"> <tr> <td>#qryUnicode.LANGUAGE#</td> <td>#qryUnicode.C_VARCHAR2#</td> <td>#qryUnicode.C_CHAR#</td> <td>#qryUnicode.C_CLOB#</td> <td>#qryUnicode.C_NVARCHAR2#</td> </tr> </cfoutput> </tbody> </table> from this guide http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10749/ch6unicode.htm#i1007297 I think for my Enterprise database it should produce same thing as XE (at least for NVARCHAR2 column) since the typical solution from that guide said: Use NCHAR and NVARCHAR2 datatypes to store Unicode characters Keep WE8ISO8859P1 as the database character set Use AL16UTF16 as the national character set So, how to make it works too in my Enterprise database? Thank you :)

    Read the article

  • How do you stop scripters from slamming your website hundreds of times a second?

    - by davebug
    [update] I've accepted an answer, as lc deserves the bounty due to the well thought-out answer, but sadly, I believe we're stuck with our original worst case scenario: CAPTCHA everyone on purchase attempts of the crap. Short explanation: caching / web farms make it impossible for us to actually track hits, and any workaround (sending a non-cached web-beacon, writing to a unified table, etc.) slows the site down worse than the bots would. There is likely some pricey bit of hardware from Cisco or the like that can help at a high level, but it's hard to justify the cost if CAPTCHAing everyone is an alternative. I'll attempt to do a more full explanation in here later, as well as cleaning this up for future searchers (though others are welcome to try, as it's community wiki). I've added bounty to this question and attempted to explain why the current answers don't fit our needs. First, though, thanks to all of you who have thought about this, it's amazing to have this collective intelligence to help work through seemingly impossible problems. I'll be a little more clear than I was before: This is about the bag o' crap sales on woot.com. I'm the president of Woot Workshop, the subsidiary of Woot that does the design, writes the product descriptions, podcasts, blog posts, and moderates the forums. I work in the css/html world and am only barely familiar with the rest of the developer world. I work closely with the developers and have talked through all of the answers here (and many other ideas we've had). Usability of the site is a massive part of my job, and making the site exciting and fun is most of the rest of it. That's where the three goals below derive. CAPTCHA harms usability, and bots steal the fun and excitement out of our crap sales. To set up the scenario a little more, bots are slamming our front page tens of times a second screenscraping (and/or scanning our rss) for the Random Crap sale. The moment they see that, it triggers a second stage of the program that logs in, clicks I want One, fills out the form, and buys the crap. In current (2/6/2009) order of votes: lc: On stackoverflow and other sites that use this method, they're almost always dealing with authenticated (logged in) users, because the task being attempted requires that. On Woot, anonymous (non-logged) users can view our home page. In other words, the slamming bots can be non-authenticated (and essentially non-trackable except by IP address). So we're back to scanning for IPs, which a) is fairly useless in this age of cloud networking and spambot zombies and b) catches too many innocents given the number of businesses that come from one IP address (not to mention the issues with non-static IP ISPs and potential performance hits to trying to track this). Oh, and having people call us would be the worst possible scenario. Can we have them call you? BradC Ned Batchelder's methods look pretty cool, but they're pretty firmly designed to defeat bots built for a network of sites. Our problem is bots are built specifically to defeat our site. Some of these methods could likely work for a short time until the scripters evolved their bots to ignore the honeypot, screenscrape for nearby label names instead of form ids, and use a javascript-capable browser control. lc again "Unless, of course, the hype is part of you

    Read the article

  • Flex 4: Traversing the Stage More Easily

    - by Steve
    The following is a MXML Module I am producing in Flex 4: <?xml version="1.0" encoding="utf-8"?> <mx:Module xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" creationComplete="init()" layout="absolute" width="100%" height="100%"> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> <fx:Style source="BMChartModule.css" /> <s:Panel id="panel" title="Benchmark Results" height="100%" width="100%" dropShadowVisible="false"> <mx:TabNavigator id="tn" height="100%" width="100%" /> </s:Panel> <fx:Script> <![CDATA[ import flash.events.Event; import mx.charts.ColumnChart; import mx.charts.effects.SeriesInterpolate; import mx.controls.Alert; import spark.components.BorderContainer; import spark.components.Button; import spark.components.Label; import spark.components.NavigatorContent; import spark.components.RadioButton; import spark.components.TextInput; import spark.layouts.*; private var xml:XML; private function init():void { var seriesInterpolate:SeriesInterpolate = new SeriesInterpolate(); seriesInterpolate.duration = 1000; xml = parentApplication.model.xml; var sectorList:XMLList = xml.SECTOR; for each(var i:XML in sectorList) { var ncLayout:HorizontalLayout = new HorizontalLayout(); var nc:NavigatorContent = new NavigatorContent(); nc.label = i.@NAME; nc.name = "NC_" + nc.label; nc.layout = ncLayout; tn.addElement(nc); var cC:ColumnChart = new ColumnChart(); cC.percentWidth = 70; cC.name = "CC"; nc.addElement(cC); var bClayout:VerticalLayout = new VerticalLayout(); var bC:BorderContainer = new BorderContainer(); bC.percentWidth = 30; bC.layout = bClayout; nc.addElement(bC); var bClabel:Label = new Label(); bClabel.percentWidth = 100; bClabel.text = "Select a graph to view it in the column chart:"; var dpList:XMLList = sectorList.(@NAME == i.@NAME).DATAPOINT; for each(var j:XML in dpList) { var rB:RadioButton = new RadioButton(); rB.groupName = "dp"; rB.label = j.@NAME; rB.addEventListener(MouseEvent.CLICK, rBclick); bC.addElement(rB); } } } private function rBclick(e:MouseEvent):void { var selectedTab:NavigatorContent = this.tn.selectedChild as NavigatorContent; var colChart:ColumnChart = selectedTab.getChildByName("CC") as ColumnChart; trace(selectedTab.getChildAt(0)); } ]]> </fx:Script> </mx:Module> I'm writing this function rBclick to redraw the column chart when a radio button is clicked. In order to do this I need to find the column chart on the stage using actionscript. I've currently got 3 lines of code in here to do this: var selectedTab:NavigatorContent = this.tn.selectedChild as NavigatorContent; var colChart:ColumnChart = selectedTab.getChildByName("CC") as ColumnChart; trace(selectedTab.getChildAt(0)); Getting to the active tab in the tabnavigator is easy enough, but then selectedTab.getChildAt(0) - which I was expecting to be the chart - is a "spark.skin.spark.SkinnableContainerSkin"...anyway, I can continue to traverse the tree using this somewhat annoying code, but I'm hoping there is an easier way. So in short, at run time I want to, with as little code as possible, identify the column chart in the active tab so I can redraw it. Any advice would be greatly appreciated.

    Read the article

  • Cannot Logout of Facebook with Facebook C# SDK

    - by Ryan Smyth
    I think I've read just about everything out there on the topic of logging out of Facebook inside of a Desktop application. Nothing so far works. Specifically, I would like to log the user out so that they can switch identities, e.g. People sharing a computer at home could then use the software with their own Facebook accounts, but with no chance to switch accounts, it's quite messy. (Have not yet tested switching Windows users accounts as that is simply far too much to ask of the end user and should not be necessary.) Now, I should say that I have set the application to use these permissions: string[] permissions = new string[] { "user_photos", "publish_stream", "offline_access" }; So, "offline_access" is included there. I do not know if this does/should affect logging out or not. Again, my purpose for logging out is merely to switch users. (If there's a better approach, please let me know.) The purported solutions seem to be: Use the JavaScript SDK (FB.logout()) Use "m.facebook.com" instead Create your own URL (and possibly use m.facebook.com) Create your own URL and use the session variable (in ASP.NET) The first is kind of silly. Why resort to JavaScript when you're using C#? It's kind of a step backwards and has a lot of additional overhead in a desktop application. (I have not tried this as it's simply disgustingly messy to do this in a desktop application.) If anyone can confirm that this is the only working method, please do so. I'm desperately trying to avoid it. The second doesn't work. Perhaps it worked in the past, but my umpteen attempts to get it to work have all failed. The third doesn't work. I've tried umpteen dozen variations with zero success. The last option there doesn't work for a desktop application because it's not ASP.NET and you don't have a session variable to work with. The Facebook C# SDK logout also no longer works. i.e. public FacebookLoginDialog(string appId, string[] extendedPermissions, bool logout) { IDictionary<string, object> loginParameters = new Dictionary<string, object> { { "response_type", "token" }, { "display", "popup" } }; _navigateUri = FacebookOAuthClient.GetLoginUrl(appId, null, extendedPermissions, logout, loginParameters); InitializeComponent(); } I remember it working in the past, but it no longer works now. (Which truly puzzles me...) It instead now directs the user to the Facebook mobile page, where the user must manually logout. Now, I could do browser automation to automatically click the logout link for the user, however, this is prone to breaking if Facebook updates the mobile UI. It is also messy, and possibly a worse solution than trying to use the JavaScript SDK FB.logout() method (though not by much). I have searched for some kind of documentation, however, I cannot find anything in the Facebook developer documentation that illustrates how to logout an application. Has anyone solved this problem, or seen any documentation that can be ported to work with the Facebook C# SDK? I am certainly open to using a WebClient or HttpClient/Response if anyone can point to some documentation that could work with it. I simply have not been able to find any low-level documentation that shows how this approach could work. Thank you in advance for any advice, pointers, or links.

    Read the article

  • MSBuild condition across projects

    - by Billy Talented
    I have tried several solutions for this problem. Enough to know I do not know enough about MSBuild to do this elegantly but I feel like there should be a method. I have a set of libraries for working with .net projects. A few of the projects utilize System.Web.Mvc - which recently released Version 2 - and we are looking forward to the upgrade. Currently sites which reference this library reference it directly by the project(csproj) on the developer's computer - not a built version of the library so that changes and source code case easily be viewed when dealing code from this library. This works quite well and would prefer to not have to switch to binary references (but will if this is the only solution). The problem I have is that because of some of the functionality that was added onto the MVC1 based library (view engines, model binders etc) several of the sites reliant on these libraries need to stay on MVC1 until we have full evaluated and tested them on MVC2. I would prefer to not have to fork or have two copies on each dev machine. So what I would like to be able to do is set a property group value in the referencing web application and have this read by the above mentions library with the caviat that when working directly on the library via its containing solution I would like to be able to control this via Configuration Manager by selecting a build type and that property overriding the build behavior of the solution (i.e. 'Debug - MVC1' vs 'Debug -MVC2') - I have this working via: <Choose> <When Condition=" '$(Configuration)|$(Platform)' == 'Release - MVC2|AnyCPU' Or '$(Configuration)|$(Platform)' == 'Debug - MVC2|AnyCPU'"> <ItemGroup> <Reference Include="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL"> </Reference> <Reference Include="Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, processorArchitecture=MSIL"> <SpecificVersion>False</SpecificVersion> <HintPath>..\Dependancies\Web\MVC2\Microsoft.Web.Mvc.dll</HintPath> </Reference> </ItemGroup> </When> <Otherwise> <ItemGroup> <Reference Include="System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL"> <SpecificVersion>False</SpecificVersion> <HintPath>..\Dependancies\Web\MVC\System.Web.Mvc.dll</HintPath> </Reference> </ItemGroup> </Otherwise> The item that I am struggling with is the cross solution issue(solution TheWebsite references this project and needs to control which build property to use) that I have not found a way to work with that I think is a solid solution that enabled the build within visual studio to work as it has to date. Other bits: we are using VS2008, Resharper, TeamCity for CI, SVN for source control.

    Read the article

  • Error using Session in IIS7

    - by flashnik
    After deployment of my website to IIS I'm getting a following error message when trying to access session: Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the \\ section in the application configuration. I access it in Page_Load or PreRender events (I tried both versions). With VS Dev Server it works without a problem. I tried both InProc an SessionState storage, 1 and multiple woker processes. I added a enableSessionState = "true" to my webpage explicitly. Here is part of web.config: <system.web> <globalization culture="ru-RU" uiCulture="ru-RU" /> <compilation debug="true" defaultLanguage="c#"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions.Design, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" /> <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> </assemblies> </compilation> <pages enableEventValidation="false" enableSessionState="true"> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="SearchUrlRewriter" type="Synonymizer.SearchUrlRewriter, Synonymizer, Version=1.0.0.0, Culture=neutral" /> <add name="Session" type="System.Web.SessionStateModule" /> </httpModules> <sessionState cookieless="UseCookies" cookieName="My_SessionId" mode="InProc" stateNetworkTimeout="5" /> <customErrors mode="Off" /> </system.web> What else do I need to do to make it work?? UPD I tried to monitor if IIS accesses aspnet_client folder with ProcMon and didn't get any access.

    Read the article

  • Covariance and Contravariance in C#

    - by edalorzo
    I will start by saying that I am Java developer learning to program in C#. As such I do comparisons of what I know with what I am learning. I have been playing with C# generics for a few hours now, and I have been able to reproduce the same things I know in Java in C#, with the exception of a couple of examples using covariance and contravariance. The book I am reading is not very good in the subject. I will certainly seek more info on the web, but while I do that, perhaps you can help me find a C# implementation for the following Java code. An example is worth a thousand words, and I was hoping that by looking a good code sample I will be able to assimilate this more rapidly. Covariance In Java I can do something like this: public static double sum(List<? extends Number> numbers) { double summation = 0.0; for(Number number : numbers){ summation += number.doubleValue(); } return summation; } I can use this code as follows: List<Integer> myInts = asList(1,2,3,4,5); List<Double> myDoubles = asList(3.14, 5.5, 78.9); List<Long> myLongs = asList(1L, 2L, 3L); double result = 0.0; result = sum(myInts); result = sum(myDoubles) result = sum(myLongs); Now I did discover that C# supports covariance/contravariance only on interfaces and as long as they have been explicitly declared to do so (out). I think I was not able to reproduce this case, because I could not find a common ancestor of all numbers, but I believe that I could have used IEnumerable to implement such thing if a common ancestor exists. Since IEnumerable is a covariant type. Right? Any thoughts on how to implement the list above? Just point me into the right direction. Is there any common ancestor of all numeric types? Contravariance The contravariance example I tried was the following. In Java I can do this to copy one list into another. public static void copy(List<? extends Number> source, List<? super Number> destiny){ for(Number number : source) { destiny.add(number); } } Then I could use it with contravariant types as follows: List<Object> anything = new ArrayList<Object>(); List<Integer> myInts = asList(1,2,3,4,5); copy(myInts, anything); My basic problem, trying to implement this in C# is that I could not find an interface that was both covariant and contravariant at the same time, as it is case of List in my example above. Maybe it can be done with two different interface in C#. Any thoughts on how to implement this? Thank you very much to everyone for any answers you can contribute. I am pretty sure I will learn a lot from any example you can provide.

    Read the article

  • Design Question - how do you break the dependency between classes using an interface?

    - by Seth Spearman
    Hello, I apologize in advance but this will be a long question. I'm stuck. I am trying to learn unit testing, C#, and design patterns - all at once. (Maybe that's my problem.) As such I am reading the Art of Unit Testing (Osherove), and Clean Code (Martin), and Head First Design Patterns (O'Reilly). I am just now beginning to understand delegates and events (which you would see if you were to troll my SO questions of recent). I still don't quite get lambdas. To contextualize all of this I have given myself a learning project I am calling goAlarms. I have an Alarm class with members you'd expect (NextAlarmTime, Name, AlarmGroup, Event Trigger etc.) I wanted the "Timer" of the alarm to be extensible so I created an IAlarmScheduler interface as follows... public interface AlarmScheduler { Dictionary<string,Alarm> AlarmList { get; } void Startup(); void Shutdown(); void AddTrigger(string triggerName, string groupName, Alarm alarm); void RemoveTrigger(string triggerName); void PauseTrigger(string triggerName); void ResumeTrigger(string triggerName); void PauseTriggerGroup(string groupName); void ResumeTriggerGroup(string groupName); void SetSnoozeTrigger(string triggerName, int duration); void SetNextOccurrence (string triggerName, DateTime nextOccurrence); } This IAlarmScheduler interface define a component that will RAISE an alarm (Trigger) which will bubble up to my Alarm class and raise the Trigger Event of the alarm itself. It is essentially the "Timer" component. I have found that the Quartz.net component is perfectly suited for this so I have created a QuartzAlarmScheduler class which implements IAlarmScheduler. All that is fine. My problem is that the Alarm class is abstract and I want to create a lot of different KINDS of alarm. For example, I already have a Heartbeat alarm (triggered every (int) interval of minutes), AppointmentAlarm (triggered on set date and time), Daily Alarm (triggered every day at X) and perhaps others. And Quartz.NET is perfectly suited to handle this. My problem is a design problem. I want to be able to instantiate an alarm of any kind without my Alarm class (or any derived classes) knowing anything about Quartz. The problem is that Quartz has awesome factories that return just the right setup for the Triggers that will be needed by my Alarm classes. So, for example, I can get a Quartz trigger by using TriggerUtils.MakeMinutelyTrigger to create a trigger for the heartbeat alarm described above. Or TriggerUtils.MakeDailyTrigger for the daily alarm. I guess I could sum it up this way. Indirectly or directly I want my alarm classes to be able to consume the TriggerUtils.Make* classes without knowing anything about them. I know that is a contradiction, but that is why I am asking the question. I thought about putting a delegate field into the alarm which would be assigned one of these Make method but by doing that I am creating a hard dependency between alarm and Quartz which I want to avoid for both unit testing purposes and design purposes. I thought of using a switch for the type in QuartzAlarmScheduler per here but I know it is bad design and I am trying to learn good design. If I may editorialize a bit. I've decided that coding (predefined) classes is easy. Design is HARD...in fact, really hard and I am really fighting feeling stupid right now. I guess I want to know if you really smart people took a while to really understand and master this stuff or should I feel stupid (as I do) because I haven't grasped it better in the couple of weeks/months I have been studying. You guys are awesome and thanks in advance for your answers. Seth

    Read the article

  • SQL Server 2005 Blocking Problem (ASYNC_NETWORK_IO)

    - by ivankolo
    I am responsible for a third-party application (no access to source) running on IIS and SQL Server 2005 (500 concurrent users, 1TB data, 8 IIS servers). We have recently started to see significant blocking on the database (after months of running this application in production with no problems). This occurs at random intervals during the day, approximately every 30 minutes, and affects between 20 and 100 sessions each time. All of the sessions eventually hit the application time out and the sessions abort. The problem disappears and then gradually re-emerges. The SPID responsible for the blocking always has the following features: WAIT TYPE = ASYNC_NETWORK_IO The SQL being run is “(@claimid varchar(15))SELECT claimid, enrollid, status, orgclaimid, resubclaimid, primaryclaimid FROM claim WHERE primaryclaimid = @claimid AND primaryclaimid < claimid)”. This is relatively innocuous SQL that should only return one or two records, not a large dataset. NO OTHER SQL statements have been implicated in the blocking, only this SQL statement. This is parameterized SQL for which an execution plan is cached in sys.dm_exec_cached_plans. This SPID has an object-level S lock on the claim table, so all UPDATEs/INSERTs to the claim table are also blocked. HOST ID varies. Different web servers are responsible for the blocking sessions. E.g., sometimes we trace back to web server 1, sometimes web server 2. When we trace back to the web server implicated in the blocking, we see the following: There is always some sort of application related error in the Event Log on the web server, linked to the Host ID and Host Process ID from the SQL Session. The error messages vary, usually some sort of SystemOutofMemory. (These error messages seem to be similar to error messages that we have seen in the past without such dramatic consequences. We think was happening before, but didn’t lead to blocking. Why now?) No known problems with the network adapters on either the web servers or the SQL server. (In any event the record set returned by the offending query would be small.) Things ruled out: Indexes are regularly defragmented. Statistics regularly updated. Increased sample size of statistics on claim.primaryclaimid. Forced recompilation of the cached execution plan. Created a compound index with primaryclaimid, claimid. No networking problems. No known issues on the web server. No changes to application software on web servers. We hypothesize that the chain of events goes something like this: Web server process submits SQL above. SQL server executes the SQL, during which it acquires a lock on the claim table. Web server process gets an error and dies. SQL server session is hung waiting for the web server process to read the data set. SQL Server sessions that need to get X locks on parts of the claim table (anyone processing claims) are blocked by the lock on the claim table and remain blocked until they all hit the application time out. Any suggestions for troubleshooting while waiting for the vendor's assistance would be most welcome. Is there a way to force SQL Server to lock at the row/page level for this particular SQL statement only? Is there a way to set a threshold on ASYNC_NETWORK_IO waits only?

    Read the article

  • jQuery .append() not working in IE, Safari, and Chrome

    - by mkmcdonald
    So I'm using jQuery's AJAX function to read some XML for me and it's worked just fine. But now I'm trying to manipulate the display property of 4 different dynamically generated divs. The size and x/y of the divs are determined by the XML and are parsed through. My problem lies in the face that these divs either aren't being generated or just don't show up in IE, Safari, and Chrome. In Firefox and Opera, they do work. I'm using jQuery's .append() to create the divs and then the .css() functino to manipulate them. Looking in Chrome's developer tools, I am seeing that the css property being changed in the script is being overridden by the property in the stylesheet. Any fixes? $(document).ready(function(){ $.ajax({ type: "GET", url: "generate?test", dataType: "xml", success: function(xml) { $(xml).find('template').each(function(){ var portion = $(this).attr('portion'); var select; var name = $(this).find('$(this):first').text(); var mutability = $(this).attr('mutability'); var x = (parseInt($(this).find('x:first').text())*96)/72; var y = (parseInt($(this).find('y:first').text())*96)/72; switch(portion){ case "stub": select = $('#StubTemplates'); select.append(""+name+""); break; case "body": select = $('#BodyTemplates'); select.append(""+name+""); y = y + 90; break; } switch(mutability){ case "dynamic": var width = (parseInt($(this).find('width:first').text())*96)/72; var height = (parseInt($(this).find('height:first').text())*96)/72; var n = name; switch(portion){ case "stub": $('.ticket').append("") break; case "body": $('.ticket').append(""); break; } var top = $('#'+n).position().top; var left = parseInt($('#'+n).css('margin-left')); $('#'+n).css('top', (y+top)+"px"); $('#'+n).css('margin-left', (x+left)+"px"); $('#'+n).css('width', width+"px"); $('#'+n).css('height', height+"px"); break; case "static": var n = name; switch(portion){ case "stub": $('.ticket').append(""); break; case "body": $('.ticket').append(""); break; } break; } }); var stubActive = false; var bodyActive = false; $('#StubTemplates').find('.ddindent').mouseup(function(){ var tVal = $(this).val(); var tTitle = $(this).attr('title'); if(!stubActive){ $('.stubEditable').css('display', 'none'); $('#'+tVal).css('display', 'block'); stubActive = true; }else{ $('.stubEditable').css('display', 'none'); $('#'+tVal).css('display', 'block'); stubActive = false; } }); $('#StubTemplates').find('#stubTempNone').mouseup(function(){ $('.stubEditable').css('display', 'none'); }); $('#BodyTemplates').find('.ddindent').mouseup(function(){ var tVal = $(this).val(); var tTitle = $(this).attr('title'); if(!bodyActive){ $('.bodyEditable').css('display', 'none'); $('#'+tVal).css('display', 'block'); bodyActive = true; }else{ $('.bodyEditable').css('display', 'none'); $('#'+tVal).css('display', 'block'); bodyActive = false; } }); $('#BodyTemplates').find('#bodyTempNone').mouseup(function(){ $('.bodyEditable').css('display', 'none'); }); } }); });

    Read the article

  • .NET Programmatically invoke screenclick doesn't work?

    - by ropstah
    I'm trying to programmatically invoke an onclick event however the click is not received/handled. Am I missing something, or is security preventing the click to be executed? I have a forms application which is invisible. Basically I would like to say: DoDoubleClick(wait, x, y) This should raise two click (mousedown+mouseup) events on screen with the specified wait interval. However the click isn't received in a Flash application in Firefox (which is running at that moment). Here's my code: Form: Public Class Form1 Private WithEvents gmh As GlobalMouseHook Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load gmh = New GlobalMouseHook() Me.Visible = false gmh.DoDoubleClick(50, 800, 600) End Sub Private Sub Form1_FormClosed(ByVal sender As System.Object, ByVal e As System.Windows.Forms.FormClosedEventArgs) Handles MyBase.FormClosed gmh.Dispose() End Sub Private Sub gmh_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles gmh.MouseDown End Sub Private Sub gmh_MouseMove(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles gmh.MouseMove End Sub Private Sub gmh_MouseUp(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles gmh.MouseUp End Sub End Class GlobalMouseHook class: Friend Class GlobalMouseHook Implements IDisposable Private hhk As IntPtr = IntPtr.Zero Private disposedValue As Boolean = False Public Event MouseDown As MouseEventHandler Public Event MouseUp As MouseEventHandler Public Event MouseMove As MouseEventHandler Public Sub New() Hook() End Sub Private Sub Hook() Dim hInstance As IntPtr = LoadLibrary("User32") hhk = SetWindowsHookEx(WH_MOUSE_LL, AddressOf Me.HookProc, hInstance, 0) End Sub Private Sub Unhook() UnhookWindowsHookEx(hhk) End Sub Public Sub DoDoubleClick(ByVal wait As Integer, ByVal x As Integer, ByVal y As Integer) RaiseEvent MouseDown(Me, New MouseEventArgs(MouseButtons.Left, 1, x, y, 0)) RaiseEvent MouseUp(Me, Nothing) System.Threading.Thread.Sleep(wait) RaiseEvent MouseDown(Me, New MouseEventArgs(MouseButtons.Left, 1, x, y, 0)) RaiseEvent MouseUp(Me, Nothing) End Sub Private Function HookProc(ByVal nCode As Integer, ByVal wParam As UInteger, ByRef lParam As MSLLHOOKSTRUCT) As Integer If nCode >= 0 Then Select Case wParam Case WM_LBUTTONDOWN RaiseEvent MouseDown(Me, New MouseEventArgs(MouseButtons.Left, 0, lParam.pt.x, lParam.pt.y, 0)) Case WM_RBUTTONDOWN RaiseEvent MouseDown(Me, New MouseEventArgs(MouseButtons.Right, 0, lParam.pt.x, lParam.pt.y, 0)) Case WM_MBUTTONDOWN RaiseEvent MouseDown(Me, New MouseEventArgs(MouseButtons.Middle, 0, lParam.pt.x, lParam.pt.y, 0)) Case WM_LBUTTONUP, WM_RBUTTONUP, WM_MBUTTONUP RaiseEvent MouseUp(Nothing, Nothing) Case WM_MOUSEMOVE RaiseEvent MouseMove(Nothing, Nothing) Case WM_MOUSEWHEEL, WM_MOUSEHWHEEL Case Else Console.WriteLine(wParam) End Select End If Return CallNextHookEx(hhk, nCode, wParam, lParam) End Function Private Structure API_POINT Public x As Integer Public y As Integer End Structure Private Structure MSLLHOOKSTRUCT Public pt As API_POINT Public mouseData As UInteger Public flags As UInteger Public time As UInteger Public dwExtraInfo As IntPtr End Structure Private Const WM_MOUSEWHEEL As UInteger = &H20A Private Const WM_MOUSEHWHEEL As UInteger = &H20E Private Const WM_MOUSEMOVE As UInteger = &H200 Private Const WM_LBUTTONDOWN As UInteger = &H201 Private Const WM_LBUTTONUP As UInteger = &H202 Private Const WM_MBUTTONDOWN As UInteger = &H207 Private Const WM_MBUTTONUP As UInteger = &H208 Private Const WM_RBUTTONDOWN As UInteger = &H204 Private Const WM_RBUTTONUP As UInteger = &H205 Private Const WH_MOUSE_LL As Integer = 14 Private Delegate Function LowLevelMouseHookProc(ByVal nCode As Integer, ByVal wParam As UInteger, ByRef lParam As MSLLHOOKSTRUCT) As Integer Private Declare Auto Function LoadLibrary Lib "kernel32" (ByVal lpFileName As String) As IntPtr Private Declare Auto Function SetWindowsHookEx Lib "user32.dll" (ByVal idHook As Integer, ByVal lpfn As LowLevelMouseHookProc, ByVal hInstance As IntPtr, ByVal dwThreadId As UInteger) As IntPtr Private Declare Function CallNextHookEx Lib "user32" (ByVal hhk As IntPtr, ByVal nCode As Integer, ByVal wParam As UInteger, ByRef lParam As MSLLHOOKSTRUCT) As Integer Private Declare Function UnhookWindowsHookEx Lib "user32" (ByVal hhk As IntPtr) As Boolean ' IDisposable Protected Overridable Sub Dispose(ByVal disposing As Boolean) If Not Me.disposedValue Then If disposing Then ' TODO: free other state (managed objects). End If Unhook() End If Me.disposedValue = True End Sub ' This code added by Visual Basic to correctly implement the disposablepattern. Public Sub Dispose() Implements IDisposable.Dispose ' Do not change this code. Put cleanup code in Dispose(ByValdisposing As Boolean) above. Dispose(True) GC.SuppressFinalize(Me) End Sub End Class

    Read the article

  • Error When Loading Images on Local Host Test Server

    - by ke4ktz
    I have a peculiar problem that I just can't seem to find an explanation. I'm working on an AngularJS site for our family and am integrating data from various web services. Currently I am working on the photos section which will integrate in photos from our Flickr account. I have a main page which lists the various photo sets and displays the set's primary photo along with the title. (Note: I'm using the Flickr 'extras' parameter to return the primary photo's URL in the API calls.) <div data-ng-repeat="p in vm.photoSets"> <a ng-href="#/photos/{{p.id}}"> <img ng-src="{{p.primary_photo_extras.url_s}}"></img> </a> <h4>{{p.title._content}}</h4> </div> When clicking on the photo, the routing will display a page with a list of all the photos from that set, showing the image and the title. <div data-ng-repeat="p in vm.photoSetData.photo"> <a ng-href="#/photos/{{vm.photoSetId}}/{{p.id}}" <img ng-src="{{p.url_s}}"></img> </a> <h4>{{p.title}}</h4> </div> Now, here's where the problem is occuring. When I upload the code to my public website on my hosting provider, everything works just fine. Both pages display their respective photos. However, when I attempt to run the site on my local system, either in MAMP or NodeJS (using http-server), the second page gives me an error for each image: Error: [$interpolate:interr] Can't interpolate: {{p.url_s}} Error: [$sce:insecurl] Blocked loading resource from url not allowed by $sceDelegate policy. URL: https://farm1.staticflickr.com/37/82749767_e82ff60ce3_m.jpg http://errors.angularjs.org/1.2.9/$sce/insecurl?p0=https%3A%2F%2Ffarm1.staticflickr.com%2F37%2F82749767_e82ff60ce3_m.jpg http://errors.angularjs.org/1.2.9/$interpolate/interr?p0=%7B%7Bp.url_s%7D%7D&p1=Error%3A%20%5B%24sce%3Ainsecurl%5D%20Blocked%20loading%20resource%20from%20url%20not%20allowed%20by%20%24sceDelegate%20policy.%20%20URL%3A%20https%3A%2F%2Ffarm1.staticflickr.com%2F37%2F82749767_e82ff60ce3_m.jpg%0Ahttp%3A%2F%2Ferrors.angularjs.org%2F1.2.9%2F%24sce%2Finsecurl%3Fp0%3Dhttps%253A%252F%252Ffarm1.staticflickr.com%252F37%252F82749767_e82ff60ce3_m.jpg minErr/<@http://localhost/scripts/angular.js:78 $interpolate/fn@http://localhost/scripts/angular.js:8254 $RootScopeProvider/this.$get</Scope.prototype.$digest@http://localhost/scripts/angular.js:11800 $RootScopeProvider/this.$get</Scope.prototype.$apply@http://localhost/scripts/angular.js:12061 done@http://localhost/scripts/angular.js:7843 completeRequest@http://localhost/scripts/angular.js:8026 createHttpBackend/</jsonpDone<@http://localhost/scripts/angular.js:7942 jsonpReq/doneWrapper@http://localhost/scripts/angular.js:8039 jsonpReq/script.onerror@http://localhost/scripts/angular.js:8053 The API call to Flickr is successful and returns the correct data. In fact, the image title does display! I've tested it with Firefox, Safari and Chrome...all three browsers fail. I cannot find any explanation as to why it would work remotely but fail locally. Also, the images show up on the first page, but not on the second, even though one of the images on the second page is the same image URL as on the first page. Even going directly to the second page, bypassing the first page, still fails. Any ideas on how to fix this? It would be nice to test locally without having to upload to the server each time I make a change. Update: I have shut off the $sce security to see if that was causing the issue. Although it resulted in turning the error off, the files still don't load on the local test server. I have used the developer tools' network monitor and it doesn't even show an attempt to retrieve the files. AngularJS appears to shut down the retrieval, although the correct path shows up in the DOM.

    Read the article

  • Is it possible to embed Cockburn style textual UML Use Case content in the code base to improve code

    - by fooledbyprimes
    experimenting with Cockburn use cases in code I was writing some complicated UI code. I decided to employ Cockburn use cases with fish,kite,and sea levels (discussed by Martin Fowler in his book 'UML Distilled'). I wrapped Cockburn use cases in static C# objects so that I could test logical conditions against static constants which represented steps in a UI workflow. The idea was that you could read the code and know what it was doing because the wrapped objects and their public contants gave you ENGLISH use cases via namespaces. Also, I was going to use reflection to pump out error messages that included the described use cases. The idea is that the stack trace could include some UI use case steps IN ENGLISH.... It turned out to be a fun way to achieve a mini,psuedo light-weight Domain Language but without having to write a DSL compiler. So my question is whether or not this is a good way to do this? Has anyone out there ever done something similar? c# example snippets follow Assume we have some aspx page which has 3 user controls (with lots of clickable stuff). User must click on stuff in one particular user control (possibly making some kind of selection) and then the UI must visually cue the user that the selection was successful. Now, while that item is selected, the user must browse through a gridview to find an item within one of the other user controls and then select something. This sounds like an easy thing to manage but the code can get ugly. In my case, the user controls all sent event messages which were captured by the main page. This way, the page acted like a central processor of UI events and could keep track of what happens when the user is clicking around. So, in the main aspx page, we capture the first user control's event. using MyCompany.MyApp.Web.UseCases; protected void MyFirstUserControl_SomeUIWorkflowRequestCommingIn(object sender, EventArgs e) { // some code here to respond and make "state" changes or whatever // // blah blah blah // finally we have this (how did we know to call fish level method?? because we knew when we wrote the code to send the event in the user control) UpdateUserInterfaceOnFishLevelUseCaseGoalSuccess(FishLevel.SomeNamedUIWorkflow.SelectedItemForPurchase) } protected void UpdateUserInterfaceOnFishLevelGoalSuccess(FishLevel.SomeNamedUIWorkflow goal) { switch (goal) { case FishLevel.SomeNamedUIWorkflow.NewMasterItemSelected: //call some UI related methods here including methods for the other user controls if necessary.... break; case FishLevel.SomeNamedUIWorkFlow.DrillDownOnDetails: //call some UI related methods here including methods for the other user controls if necessary.... break; case FishLevel.SomeNamedUIWorkFlow.CancelMultiSelect: //call some UI related methods here including methods for the other user controls if necessary.... break; // more cases... } } } //also we have protected void UpdateUserInterfaceOnSeaLevelGoalSuccess(SeaLevel.SomeNamedUIWorkflow goal) { switch (goal) { case SeaLevel.CheckOutWorkflow.ChangedCreditCard: // do stuff // more cases... } } } So, in the MyCompany.MyApp.Web.UseCases namespace we might have code like this: class SeaLevel... class FishLevel... class KiteLevel... The workflow use cases embedded in the classes could be inner classes or static methods or enumerations or whatever gives you the cleanest namespace. I can't remember what I did originally but you get the picture.

    Read the article

  • How do I solve "Two different CRTLDLLs are loaded" when using packages in C++ Builder 2010?

    - by David M
    Hi, We are trying to split up our monolithic EXE into a combination of an EXE and several packages. So far, we have one package that we're trying to use, and when running the EXE Codeguard shows the following error on startup: CG Error Two different CRTLDLLs are loaded. CG might report false errors (C:\Windows\system32\CC32100MT.DLL) (D:\Projects\Foo\Bar.bpl) OK I read this as two different runtime libraries being loaded - one, the correct one (CC32100MT.dll), one incorrect, which is the package we're trying to use. Continuing to run the program shows odd errors, especially casting between classes or passing a pointer to a class as a parameter in a method that crosses the EXE/DLL boundary. Codeguard itself doesn't show any other errors at all though. How do we solve this? Some more details We've looked at as many things as we (the developer working on this and I) can collectively think of: Each project is built using runtime packages. The EXE host lists Bar in its package list. Each project is set to compile with dynamic RTL. However, changing this does not solve the problem. The package is linked to the EXE via its BPI file, but linking via a LIB makes no difference either. The EXE and BPL are compiled with the same project settings, where the same options exist for both types of project. We think, anyway :) There is only one copy of the BPL and BPI on the system: it's definitely linking to the right one. Examining the EXE and BPL with Depends and TDump show they are both using C:\Windows\system32\CC32100MT.DLL. They should both be using the one RTL. Creating a new project (a plain VCL forms application) and linking to the BPL (via its BPI) works fine. Something in the process of adding all the files and LIBs that make our EXE contain the code it needs to changes this, but we haven't been able to figure out what. The LIBs all either correspond to DLLs we use (flat C interface, usually look as though they were built with MSVC) or are simple projects with lots of related files, compiled to a lib for the purpose of linking into the EXE - these correspond roughly to the areas of the program we want to split to BPLs, by the way. There don't seem to be project options for the LIB projects that would affect RTL linking, unless we've missed them. I have exhaustively hunted through Depends and looked at all RTL and CC32*.dll files the EXE and every single DLL references. All are identical: rtl140.bpl and CC32100MT.DLL. Fully qualified paths show they are the same files, too. Everything should be using the one same run-time library. We're stumped. Absolutely stumped. We've had other problems using BPLs (they seem to be surprisingly tricky things, especially using C++) but have managed to solve them all. This one we've had no luck at all and we'd really appreciate any insights :) We're using C++Builder 2010 (as part of RAD Studio actually, but with little Delphi code apart from components.)

    Read the article

  • CSS selector driving me nuts!!!

    - by YsoL8
    Apoologies in advance for the slightly long winded code in this question @charset "UTF-8"; /* CSS Document */ * { margin:0; padding:0; font-family:Arial, Helvetica, sans-serif; } #wrapper { width:900px; margin:0 auto 0 auto; } #header { background-color:#800080; width:894px; min-height:60px; padding-top:6px; padding-left:6px; } #header img { margin-left:200px; margin-top:10px; } #headerleft { float:left; } #header h2 { font-family:Arial Black, Arial, Helvetica, sans-serif; color:#ffff00; font-size:36px; /*float:left;*/ } #header h3 { font-family:Arial Black, Arial, Helvetica, sans-serif; color:#ffff00; font-size:14px; } #nav { background-color:#800080; width:100%; min-height:30px; } #nav ul { padding-left:7px; padding-right:7px; } #nav li { list-style:none; display:inline; padding:5px 44px 5px 44px; } #nav li a { color:#FFF; text-decoration:none; } #nav li a:hover { color:#ffff00; } #leftcol { background-color:#800080; width:125px; min-height:30px; float:left; } #leftcol img { margin-left:20px; margin-bottom:20px; } .content { padding:20px 10px 10px 20px; float:left; } <!-- admin classes --> .pageselect p { color:#C90; } #rightcol { /*background-color:#800080;*/ width:160px; min-height:330px; float:right; } .righthead { margin-top:7px; background-image:url(../images/rightcol-head.png); color:#FFF; padding: 5px 20px 5px 20px; font-size:14px; } .rightmid { background-image:url(../images/right-mid.jpg); padding: 5px 10px 5px 10px; font-size:14px; } .rightfoot { background-image:url(../images/right-foot.jpg); background-repeat:no-repeat; } .clear { clear:both; } #footer { background-color:#800080; width:880px; min-height:30px; margin-top:-20px; padding-top:30px; padding-left:20px; padding-bottom:10px; } #footer p { color:#ffff00; } #footer p a { color:#ffff00; text-decoration:none; } #footer p a:hover { font-weight:bold; } .error { color:#C30; } I have the above stylesheet. I am attempting to style the following element (taken from firefox web developer tools): html > body > div#wrapper > div#leftright > div.content > div.pageselect To my mind .pageselect should be the selector to do that, but I seem to be powerless to influence the style, and its just about sending me wacko! Why won't this work?

    Read the article

  • Help with infrequent segmentation fault in accessing boost::unordered_multimap or struct

    - by Sarah
    I'm having trouble debugging a segmentation fault. I'd appreciate tips on how to go about narrowing in on the problem. The error appears when an iterator tries to access an element of a struct Infection, defined as: struct Infection { public: explicit Infection( double it, double rt ) : infT( it ), recT( rt ) {} double infT; // infection start time double recT; // scheduled recovery time }; These structs are kept in a special structure, InfectionMap: typedef boost::unordered_multimap< int, Infection > InfectionMap; Every member of class Host has an InfectionMap carriage. Recovery times and associated host identifiers are kept in a priority queue. When a scheduled recovery event arises in the simulation for a particular strain s in a particular host, the program searches through carriage of that host to find the Infection whose recT matches the recovery time (double recoverTime). (For reasons that aren't worth going into, it's not as expedient for me to use recT as the key to InfectionMap; the strain s is more useful, and coinfections with the same strain are possible.) assert( carriage.size() > 0 ); pair<InfectionMap::iterator,InfectionMap::iterator> ret = carriage.equal_range( s ); InfectionMap::iterator it; for ( it = ret.first; it != ret.second; it++ ) { if ( ((*it).second).recT == recoverTime ) { // produces seg fault carriage.erase( it ); } } I get a "Program received signal EXC_BAD_ACCESS, Could not access memory. Reason: KERN_INVALID_ADDRESS at address..." on the line specified above. The recoverTime is fine, and the assert(...) in the code is not tripped. As I said, this seg fault appears 'randomly' after thousands of successful recovery events. How would you go about figuring out what's going on? I'd love ideas about what could be wrong and how I can further investigate the problem. Update I added a new assert and a check just inside the for loop: assert( carriage.size() > 0 ); assert( carriage.count( s ) > 0 ); pair<InfectionMap::iterator,InfectionMap::iterator> ret = carriage.equal_range( s ); InfectionMap::iterator it; cout << "carriage.count(" << s << ")=" << carriage.count(s) << endl; for ( it = ret.first; it != ret.second; it++ ) { cout << "(*it).first=" << (*it).first << endl; // error here if ( ((*it).second).recT == recoverTime ) { carriage.erase( it ); } } The EXC_BAD_ACCESS error now appears at the (*it).first call, again after many thousands of successful recoveries. Can anyone give me tips on how to figure out how this problem arises? I'm trying to use gdb. Frame 0 from the backtrace reads "#0 0x0000000100001d50 in Host::recover (this=0x100530d80, s=0, recoverTime=635.91148029170529) at Host.cpp:317" I'm not sure what useful information I can extract here. Update 2 I added a break; after the carriage.erase(it). This works, but I have no idea why (e.g., why it would remove the seg fault at (*it).first.

    Read the article

  • Editing a Gridview row with drop-down lists gets too wide - how can I use popup panels instead?

    - by David
    I have a series of GridViews in a Tab Panel - databound to a generic List of Business Objects. The columns in the Gridview are all similar to the following: <asp:TemplateField HeaderText="Company" SortExpression="Company.ShortName"> <ItemTemplate> <asp:Label ID="lblCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:Label> </ItemTemplate> <EditItemTemplate> <asp:DropDownList ID="ddlCompany" runat="server"></asp:DropDownList> </EditItemTemplate> </asp:TemplateField> The GridView generates the "Edit" link at the beginning of the row, all the events fire ok. The problem is that the data is getting long. When in 'display mode', it's fine because the GridView control is smart enough to break some text into multiple lines (in particular Project, Title and Worker names can get pretty long). The problem come in editing mode. Drop-down lists DON'T break entries into multiple lines (for obvious reasons). Going into Edit ode on a row in the Gridview can make the Griview expand horizontally to twice the screen size (blowing through the width limits in the Master page and CSS but that's only a related problem). What I need is something like the ModalPopup - but trying to tie it to an ID in an EditItemTemplate gives me errors when the page renders (because the 'ddlXXXX' doesn't exist at the time). In addition I don't know how to dynamically populate the panel so that I can get a response from it (like the ID of the Company they selected). I'm also trying to avoid javascript and would like this to be a 'pure' aspx/code-behind solution (for simplicity's sake among others). All the examples I find are of Modal Popups with the panels pre-defined. Even if it (the popup panel) were something like a list of checkboxes, it could be databound to the SortedList I have ready to go and an OK/Cancel button combination to accept or ignore things. I'm just not sure of what goes where. I'm open to suggestions. Thanks in advance. EDIT: Final solution looks as follows: <asp:TemplateField HeaderText="Company" SortExpression="Company.ShortName"> <ItemTemplate> <asp:Label ID="lblCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:Label> </ItemTemplate> <EditItemTemplate> <asp:LinkButton ID="lnkCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:LinkButton> <asp:Panel ID="pnlCompany" runat="server" style="display:none"> <div> <asp:DropDownList ID="ddlCompany" runat="server" ></asp:DropDownList> <br/> <asp:ImageButton ID="btnOKCo" runat="server" ImageUrl="~/Images/greencheck.gif" OnCommand="PopupButton_Command" CommandName="SelectCO" /> <asp:ImageButton ID="btnCxlCo" runat="server" ImageUrl="~/Images/RedX.gif" /> </div> </asp:Panel> <cc1:ModalPopupExtender ID="mpeCompany" runat="server" TargetControlID="lnkCompany" PopupControlID="pnlCompany" BackgroundCssClass="modalBackground" CancelControlID="btnCxlCo" DropShadow="true" PopupDragHandleControlID="pnlCompany" /> </EditItemTemplate> </asp:TemplateField> And in the code-behind, lstIDLabor is the generic List of data lines (of which Company is one of the properties that is also a business object) that is bound to the GridView: Sub PopupButton_Command(ByVal sender As Object, ByVal e As CommandEventArgs) Dim intRow As Integer Dim intVal As Integer RestoreFromSessionVariables() Select Case e.CommandName Case "SelectCO" intRow = grdIDCostLabor.EditIndex Dim ddlCo As DropDownList = CType(grdIDCost.Rows(intRow).FindControl("ddlCompany"), DropDownList) intVal = ddlCo.SelectedValue lstIDLabor(intRow).CompanyID = intVal lstIDLabor(intRow).Company = Company.Read(intVal) Case Else ' End Select MakeSessionVariables() BindGrids() End Sub

    Read the article

  • Lightweight use of Enterprise Library TraceListeners

    - by gWiz
    Is it possible to use the Enterprise Library 4.1 TraceListeners without using the entire Enterprise Library Logging AB? I'd prefer to simply use .NET Diagnostics Tracing, but would like to setup a listener that sends emails on Error events. I figured I could use the Enterprise Library EmailTraceListener. However, my initial attempts to configure it have failed. Here's what I hoped would work: <system.diagnostics> <trace autoflush="false" /> <sources> <source name="SampleSource" switchValue="Verbose" > <listeners> <add name="textFileListener" /> <add name="emailListener" /> </listeners> </source> </sources> <sharedListeners> <add name="textFileListener" type="System.Diagnostics.TextWriterTraceListener" initializeData="..\trace.log" traceOutputOptions="DateTime"> <filter type="System.Diagnostics.EventTypeFilter" initializeData="Verbose" /> </add> <add name="emailListener" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.EmailTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging" toAddress="[email protected]" fromAddress="[email protected]" smtpServer="mail.example.com" > <filter type="System.Diagnostics.EventTypeFilter" initializeData="Verbose" /> </add> </sharedListeners> </system.diagnostics> However I get [ArgumentException: The parameter 'address' cannot be an empty string. Parameter name: address] System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding) +1098157 System.Net.Mail.MailAddress..ctor(String address) +8 Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.EmailMessage.CreateMailMessage() +256 Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.EmailMessage.Send() +39 Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.EmailTraceListener.Write(String message) +96 System.Diagnostics.TraceListener.WriteHeader(String source, TraceEventType eventType, Int32 id) +184 System.Diagnostics.TraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args) +63 System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args) +198 System.Diagnostics.TraceSource.TraceInformation(String message) +14 Which leads me to believe the .NET Tracing code does not care about the "non-standard" config attributes I've supplied for emailListener. I also tried adding the appropriate LAB configSection declaration and: <loggingConfiguration> <listeners> <add toAddress="[email protected]" fromAddress="[email protected]" smtpServer="mail.example.com" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.EmailTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging" name="emailListener" /> </listeners> </loggingConfiguration> This also results in the same exception. I figure it's possible to programmatically configure the EmailTraceListener, but I prefer this to be config-driven. I also understand I can implement my own derivative of TraceListener. So, is it possible to use the Ent Lib TraceListeners, without using the whole Ent Lib LAB, and configure them from the config file? Update: After examining the code, I have discovered it is not possible. The Ent Lib TraceListeners do not actually utilize the config attributes they specify in overriding TraceListener.GetSupportedAttributes(), despite the recommendations in the .NET TraceListener documentation. Bug filed.

    Read the article

  • jquery scope issue

    - by matthewb
    I am having issue with the following: I can't seem to keep the link I am selecting in each repeated item. The word "this" is getting lost. the Var event_id works for each element, but the var $something is undefined? Why is that, Ideally I wanted to do a switch statement but same issue, can't seem to get it to know what link I click and the elements around it to do the action. Updated Full Function: function rsvp (selector,function_url) { $(selector).livequery('click',function(){ var $select = $(selector).attr('rel'); var $event_id= $(this).parents('ul.event-options').attr('rel'); if ($select == "attending") { $(this).closest('span.rsvp-status').html("I'm Attending &ndash; <a href='javascript:;' class='remove' rel='remove'>Remove</a>"); var $something = $(this).parents('ul.event-options').attr('rel'); alert($something); } if ($select == "remove") { $(this).closest('span.rsvp-status').html("Not Attending &ndash; <a href='javascript:;' class='rsvp' rel='attending'>RSVP?</a>"); } if ($select == "interested") { $(this).closest('li').addClass('interested'); $(this).closest('li').removeClass('not-interested'); $(this).closest('li').html("You're Interested"); } $.ajax({ type: "POST", url: "/events/set_member/"+function_url, data: "event_id="+$event_id, beforeSend: function() { $("<span class='notice'>Updating...</span>").prependTo('body'); }, complete: function() { $('span.notice').fadeOut(500); } }); }); } rsvp ('a.rsvp','rsvp'); rsvp ('a.interests','interested'); rsvp ('a.remove','remove'); HTML <ul class="event-options" rel="<?=$event['event_id']?>"> <?php if($event['rsvp_total'] > 0) { ?> <!-- Show Only When Count is Greater than 0 --> <li class="group"><span class="total"><?= $event['rsvp_total']?></span>Interested </li> <?php } ?> <li class="rsvp"><span class="rsvp-status"> Not Attending &ndash; <a href="javascript:;" class="rsvp" rel="attending">RSVP?</a></span></li> <li class="not-interested"> <a href="javascript:;" class="interests" rel="interested"> Interested? </a> </li> <li class="place"><span><a href="<?=$place_path.$event['place_id']?>"><?=$event['place_name']?></a></span></li> <li class="share" rel="<?=$event['event_name']?>"> <a class="sharethis"></a> </li> </ul>

    Read the article

< Previous Page | 664 665 666 667 668 669 670 671 672 673 674 675  | Next Page >