Search Results

Search found 2840 results on 114 pages for 'ports'.

Page 67/114 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• netsh advfirewall firewall

  - by lehn0058

  I am trying to write a script to configure a windows firewall (server 2008 & 2012 only) to adjust certain firewall settings after a machine has been added to a domain. I need to do this because one of the pre-installed programs on these machines we get only has the firewall rules setup for the public and private firewall profile. This script will be pushed out for other admins to use, and some of the machine will be in other languages. The command to change an existing firewall rule is as follows: netsh advfirewall firewall set rule name = "rule name goes here" new profile=domain This command works great. However, I need to do this for about 10 firewall ports AND since the program could be installed on computers with different languages, I can not just pass the name of all of the firewall rules. Is their some way to do this by supplying the port number? Or some way to specify a regular expression so I could use any rule that has a name LIKE 'test'?

  Read the article

• Autoplay for USB drive keeps popping up

  - by Adam Haile

  I have a Seagate external 2TB USB drive that when I leave it plugged in, the Autoplay dialog asking what to do with the drive pops up about once every 30-60 minutes. No matter how many times I tell it to go away, it keeps coming back. I have tried multiple power supplies, USB cables, and all the USB ports on my machine...but it keeps doing the same thing. Also, this does not happen with the same drive on a different computer. Could this be some power or configuration setting that is causing this? I'm running Windows 7 x64 (the computer it works on is x86)

  Read the article

• Connect iPad to windows 7 VPN

  - by Linuz

  My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

  Read the article

• SSH without portforward

  - by maigel

  I have a raspberry pi lying around in my dorm room. It's connected to campus internet which has all ports closed and I obviously don't have any access or permission to port forwarding. Now I want to ssh to the raspberry pi but this isn't possible since I can't port forward. I do however have a cheap vps doing nothing. Is there a way to make the pi connect to the vps and then use the vps as some sort of tunnel to ssh to the raspberry pi without having any port forwarding done?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• How to restrict ssh port forwarding, without denying it?

  - by Kaz

  Suppose I have created an account whose login shell is actually a script which does not permit an interactive login, and only allows a very limited, specific set of commands to be remotely executed. Nevertheless, ssh allows the user of this account to forward ports, which is a hole. Now, the twist is that I actually want that account to set up a specific port forwarding configuration when the ssh session is established. But it must be impossible configure arbitrary port forwarding. (It is an acceptable solution if the permitted port forwarding configuration is unconditionally established as part of the every session.)

  Read the article

• Can I mix CAT5 and CAT6?

  - by Jason94

  I'm thinking of upgrading the "backbone" of my network, taking a CAT6 cable from my router (DLINK DIR-655 (has cat6 ports)) to a gigabit swith in the tv rom (25m). I have two devices there that uses network (xbox and tvbox, both of them have cat5). Will my net be downgraded to 100mbit as max speed, or will I get 1 gigabit between my router and switch, and 100mbit between tvbox and xbox? From back in the days i have a tool to create my cat5 cable (the plug tool thingy), can I use this for my cat6 too?

  Read the article

• Firewall still blocking port 53 despite listing otherwise?

  - by Tom

  I have 3 nodes with virtually the same iptables rules loaded from a bash script, but one particular node is blocking traffic on port 53 despite listing it's accepting it: $ iptables --list -v Chain INPUT (policy DROP 8886 packets, 657K bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo any anywhere anywhere 2 122 ACCEPT icmp -- any any anywhere anywhere icmp echo-request 20738 5600K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- eth1 any anywhere node1.com multiport dports http,smtp 0 0 ACCEPT udp -- eth1 any anywhere ns.node1.com udp dpt:domain 0 0 ACCEPT tcp -- eth1 any anywhere ns.node1.com tcp dpt:domain 0 0 ACCEPT all -- eth0 any node2.backend anywhere 21 1260 ACCEPT all -- eth0 any node3.backend anywhere 0 0 ACCEPT all -- eth0 any node4.backend anywhere Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 15804 packets, 26M bytes) pkts bytes target prot opt in out source destination nmap -sV -p 53 ns.node1.com // From remote server Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2011-02-24 11:44 EST Interesting ports on ns.node1.com (1.2.3.4): PORT STATE SERVICE VERSION 53/tcp filtered domain Nmap finished: 1 IP address (1 host up) scanned in 0.336 seconds Any ideas? Thanks

  Read the article

• How can I connect to some old Sun servers?

  - by hellsgate

  We have some old Sun servers (V125, V210, V240, T2000 amongst others) sitting unused and I've been asked to find out if there is anything useful on them before they get wiped and disposed of. However, I've been unable to connect to any of the servers. I tried connecting the servers to a router using the Net Management, Serial Management and standard Ethernet ports. When doing this, I ran 'nmap -sP' from my Linux desktop before and after connecting a server so I could compare the two outputs and hopefully work out what IP address had been assigned to the server, but it didn't appear to have received one. Unfortunately only one of the servers has a VGA output. I was able to access this machine as we still have the login details stored in KeePass, but I've no idea at the moment on how I should go about connecting to any of the others. Any suggestions?

  Read the article

• How do I fix Nginx config to work with multiple hosts of Unicorn?

  - by fred deAlmeida

  I have no problem instantiating multiple instances of unicorn on different unix sockets and ports. Works fine if I do url:port. My problem comes in correctly formatting nginx.conf to allow multipe upstream conditions. Whatever i do does not seem to work. One instance is fine works fine. Multiple gives me a ""upstream" directive is not allowed here error I am using the base nginx sample from the unicorn site. and doubling up the upstream area with differing terms. each is part of the http set. Any help would be amazing!

  Read the article

• WinXP workgroup, 3 routers 3 computers

  - by Silvera

  I have 3 computers with WinXP x86, and 3 Cisco 1800 series routers. I'm trying to create a workgroup so that the 3 computers can share files with eachother. They can ping eachother (without any internet connection), and the routers setup is correctly configured (with interfaces, ip adresses, and ports). But none of the computers can see eachother, even though they are on the same network. My first question would be - can it be done the way it is currently configured - and, if yes, how, or can anyone point me in the right direction?

  Read the article

• Wordpress 3 multi-site install

  - by mike

  Hello, Trying to figure out if this is possible... My company has a cms product that was written in Java and we decided to use Wordpress to run blogs for our clients. Obviously, Wordpress does not run on tomcat(at least not by default) so we installed Pound(http://www.apsis.ch/pound/) on our server and have setup any Apache and Tomcat on different ports. When "/blog/" is requested, the request is directed to Apache. This works fine but we would like to use Wordpress multi site so that we can manage all the blogs from a single interface. We would also like the url for every site to be "/blog/" example: http://www.site1.com/blog/ http://www.site2.com/blog/ I'm thinking it would have to be done with apache??? Is it even possible? Thanks!

  Read the article

• How to configure a static wildcard subdomain with dnsmasq.

  - by Prody

  I have a network behind a NAT with a few machines. The machines are: router - NAT, dnsmasq, forwarding - directly connected to the inet server - which runs ssh, www and some other stuff clients - which do stuff on server I also have mydomain.com. server.mydomain.com is pointing to my connection's IP (single IP), which is the router, which forwards ports to server. Server, has a httpd running, which serves different sites based on vhosts. So I have site1.server.mydomain.com, site2.. The problem is that all the traffic is going thru the router, and when I check logs I always see the router's IP for everything (so it's hard to see who is running the script with the while(1)). I would just ServerAlias site1.server.local, but most of the sites have a root URL saved somewhere on top of which other URLs are built, so I can't do that. The solution for me would be telling dnsmasq somehow to answer to *.mydomain.com with server's IP. Is this possible somehow?

  Read the article

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

• nginx + reverse proxy question

  - by Joe Pilon

  Hello, I am using nginx right now for our production sites with the reverse proxy to apache that's on the same server and it works fantastic. I'm wondering if I can do this: Install nginx on box #1 in say Canada and have it reverse proxy http requests to box #2 in a datacenter in the USA. I know there may be some latency or delays in loading the page etc but that would probably be not noticable to the end user especially if both servers have 100mb ports. Box #2 only does the apache requests, all images are served from box #1 via nginx. Now, would the end visitor be able to tell in any which way that there are 2 boxes being used? Box #2 has sensitive data which we can't have stolen in the event of hacking etc, so this method helps keep things a bit more secure. Anyone know if this is possible or have done something similar?

  Read the article

• how do I create a bidirectional bridge using iptables

  - by Kolzoi

  Setup: I have a samsung LCD TV that is connected via eth0 to a T41 Thinkpad running Ubuntu 10.10 which is wirelessly connected to the home router. I am trying to get Samsung's remote control app working on my iPad but the app won't allow me to put in an ip address and only discovers the tv if it's on the same subnet as the iPad (lame). So I need the laptop to route packets from eth0 to the wireless interface (wlan0), and I need about 3 ports on the wlan0 interface to be forwarded to the samsung tv. Hopefully all this makes sense. I've been messing around with iptables and samsung is now able to access internet via laptop wireless, but mapping from wlan0 back to the samsung tv is eluding me.

  Read the article

• HD Radeon 6950 cannot run multiple monitors

  - by Bryan S.

  I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

  Read the article

• Squid3 not working. Access denied

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• How do I setup PHP locally on Windows 7 with Tomcat 7 already installed?

  - by James Drinkard

  I have Windows 7 64 bit running on my laptop with Tomcat 7 installed to run my java programs using Eclipse. Now I need to be working with PHP and as I went to install it, I read you need to install Apache Web Server first, before installing PHP. Then I read where you can run PHP under Tomcat or run PHP on Apache Web Server while still using Tomcat, if you reset the default port on one of them as Tomcat and Apache Web Server would use the same ports by default. What is the best way to do this? I don't want to was lots of time getting stuck on configuration issues.

  Read the article

• APF, IPTABLES, Fedora 15 - Not blocking correctly

  - by RichardW11

  I just got a new remote server which came with Fedora 15. I first tried to run APF but it gave me this error "apf(18031): {glob} unable to load iptables module (ip_tables), aborting.". Which I then set SET_MONOKERN="0" to SET_MONOKERN="1" to resolve the problem. However, with my config file showing BLK_P2P_PORTS="1214,2323,4660_4678,6257,6699,6346,6347,6881_6889,6346,7778" The ports show up as closed, instead of being filtered. Any idea why this would be happening? 22/tcp open ssh 80/tcp open http 443/tcp open https 2323/tcp closed 3d-nfsd 4662/tcp closed edonkey 6346/tcp closed gnutella 6699/tcp closed napster 6881/tcp closed bittorrent-tracker 7778/tcp closed interwise

  Read the article

• Installing CentOS 6.3 wrong hard drives order?

  - by Ken Tang

  I am trying to install CentOS 6.3 on new server that has 2xSSD and 1xHDD drives connected to mainboard's SATA ports by following order: SSD1 -> SATA1 SSD2 -> SATA2 HDD1 -> SATA3 On the installation process CentOS shows me hard drives by this order: /sda -> that is actually SSD2 /sdb -> HDD1 /sdc -> SSD1 It looks like CentOS assigns it randomly rather by the SATA connection order. My question is: What the order of drives /sd* depending on? And how can I change it to be by the order it connected to SATA? Thank you in advance!

  Read the article

• How to forward http traffic through a specific network adapter.

  - by user18129

  i have the following scenario. Two laptops are connected via a router through the Ethernet ports. These two computers need to be able to communicate together. One computer also needs to access the internet through a different adapter (i.e. we will taking these two laptops two various sites where by the most common type of internet access will be wireless).In isolation all of the various adapters work fine (i.e. the internal network works fine, and the wireless connects to the internet). However,we try to turn on all of the adapters at the same time,the following occurs: If we bridge the two network connections together on the "Server" -The internet connection doesn't work through the wireless If we don't bridge the connections The internet connections don't work It seems like http traffic is trying to be sent through the Ethernet adapter (which of course is not connected to an internet connection). How can we solve this?

  Read the article

• Hooking domain to home server with port

  - by user1071461

  Alright, I'm asking two things here. First of all, if i purchase a domain let's say myhomeserver.com, am I able to make the default port go through a different port instead of the default port 80? (that is without having to do myhomeserver.com:5000 for example). Also this should be without blocking other ports (so no stealth forwarding to myhomeserver.com:5000 i think) Secondly, How could I go about hooking a domain to a windows 2008 server? I've seen it on linux but no clue how to do it on windows if it's even possible. I know I'm asking a lot here, just some tips are appereciated. Also, yes I know, using a home server is horrible for security and preformance and whatnot, I understand this already, thanks ^^

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >