Search Results

Search found 19533 results on 782 pages for 'machine specifications'.

Page 670/782 | < Previous Page | 666 667 668 669 670 671 672 673 674 675 676 677  | Next Page >

• Performance tweaks and upgrades for VMWare Server 2

  - by sjohnston

  Our software department has a server running VMWare Server 2. We typically have 8-10 VMs running as test environments (Win XP and Server 08) for various versions of our software, and one VM that is used as a build server (Win XP). The host is running Server 2003 R2. It has 32GB RAM, 8 core Xeon 3.16GHz CPU, one disk for host OS and two raid disks for VMs. The majority of the time, this setup behaves very well and there are no complaints. Other times, the VMs can be very laggy. This is sometimes, but not always, correlated to heavy load on the build server. I'm a software developer, not an IT pro, but it seems to me that this machine should be beefy enough to handle this many VMs. Is this occasional performance hit likely just because we're hitting the limits of the hardware, or should I be looking for another culprit? From what I've read, I'm guessing if there's a bottleneck, it's probably disk I/O with all these VMs running off two disks (especially the build server). Would spreading the VMs over more disks, and/or switching to SSDs give us a significant performance boost? Other things I've read may increase performance: single virtual processor per VM removing/disabling unused virtual hardware preallocated disk space not using snapshots setting a reserved memory limit on the host and disabling VM memory swapping Can anyone confirm or deny if any of these improve performance? What other good tweaks have I missed?

  Read the article

• What are problems and pitfalls with a public facing Active Directory

  - by Ralph Shillington

  The situation that i'm faced with is this: We plan on using a number of server applications hosted on Amazon EC2 machines, mainly Microsoft Team Foundation Server. These services rely heavily on Active Directory. Since our servers are in the Amazon cloud it should go without saying (but I will) that all our users are remote. It seems that we can't setup VPN on our EC2 instance -- so the users will have to join the domain, directly over the internet then they'll be able to authenticate and once authenticated, use that token for accessing resources such as TFS. on the DC instance, I can shut down all ports, except those needed for joining/authenicating to the domain. I can also filter the IP on that machine to just those address that we are expecting our users to be at (it's a small group) On the web based application servers, I imagine all we need to open is port 80 (or 8080 in the case of TFS) One of the problems that I'm faced with is what domain name to use for this Active directory. Should I go with "ourDomainName.com" or "OurDomainName.local" If I choose the latter, does that not mean that I'll have to get all our users to change their DNS address to point to our server, so it can resolve the domain name (I guess I could also distribute a host file) Perhaps there is another alternative that I'm completely missing.

  Read the article

• Regarding AD Domain controllers and remote branch offices

  - by Alex

  We have central HQ building and a lot of small branch offices connecting via VPN and want to implement AD (If you can believe we still haven't). We want everyone to log in using domain accounts and be policed centrally. We are OK with having a RODC in a branch office with like 10 computers. But we have these small branches with two to four PCs only. Some of these branches connect to HQ via IPSec site-to-site VPN, some via remote access (client-based) VPN. So there is no problem with ones that have local RODC or connecting to HQ DCs via VPN router. But how about small branches? We don't really want to set up a machine there, neither we want to invest into Windows Server licenses or fancy network equipment. Also, the problem is that we cannot access HQ DCs via VPN because we are not logged in and connected to HQ internal network yet, so DCs aren't reachable. What is typically done in that situation if it is needed to have central management over policies on those PCs? Or is it better to let 'em loose and use local policies and accounts in this situation?

  Read the article

• Outlook / Gmail 'too many simultaneous connections' error

  - by sam

  I'm just setting up Outlook for Mac, and I'm trying to add a Google Apps application for business email (Gmail). I've set it up correctly (same details worked in Mac mail). But I keep getting two errors, either or just a error asking for the username and password again. Just to confirm the user name and password are correct, although when I go into menu command Tools - Account and look in the password field for that account it's blank. But if I just click cancel on the popup asking for my username password it just continues to get mail in the background for about 30 seconds, before again asking again for the password, or showing the above error which I can click 'yes' to and again it will get the mail. But after 30 seconds it does the same thing. I've got two other accounts set up fine, one a horde account (hosted webmail using POP3) and the other a iCloud .me account running on IMAP. What might be causing this and how I can remedy it? A bit more background: the machine is a MacBook Pro running Mac OS X v10.7 (Lion). Update 2013-11-02 I've updated Outlook to SP3, but I still get the same error.

  Read the article

• Log and debug/decrypt an windows application's HTTPS traffic

  - by cweiske

  I've got a proprietary windows-only application that uses HTTPS to speak with a (also proprietary, undocumented) web service. To ultimately be able to use the web service's functionality on my linux machines, I want to reverse-engineer the web service API by analyzing the requests sent by the application. Now the question: How can I decrypt and log the HTTPS traffic? I know of several solutions which don't apply in my case: Fiddler is a man-in-the-middle HTTPS proxy which I cannot use since the application doesn't support proxies. Also, I do not (yet) know if it works with self-signed server certificates, which I doubt. Wireshark is able to decrypt SSL streams if you have the server's private certificate, which I don't have. any browser extension since the application is not a browser If I remember correctly, there have been some trojans that capture online banking information by hooking into/replacing the window's crypto API. Since the machine is mine, low level changes are possible. Maybe there is a non-trojan (white-hat) network log application out there which does the same? There is a blackhat presentation with some details available to read. They refer to Microsoft Research Detour for easy API hooking.

  Read the article

• Server Clustering (Django, Apache, Nginx, Postgres)

  - by system-matrix

  I have a project deployed with django, Apache, Nginx and Postgres. The project has requirement of live data viewable to customers. The projects main points are: 1. Devices in field send data to server(devices are also like website users) after login. 2. There is background import process which imports the uploaded data in postgres. 3. The webusers of the system use this data and can send commands to the devices, which devices read when they login. 4. There are also background analysis routines running on the data. All the above mentioned setup and system is deployed on one amazon EC2 cloud machine. The project currently supports over 600 devices and 400 users. But as the number of devices are increasing with time the performance of the server is going down. We want to extend this project so that it can support more and more devices. My initial thinking is, We will create one more server like current one and divide the devices amongst these to servers. But Again We need a central user and device managment point though django admin. Any Ideas? What are the best possible ways to create a scalable architecture? How can I create a Postgres Cluster and Use it with Django, if possible?

  Read the article

• How to record tv to network share with Windows Media Center?

  - by Peterdk

  Well, you would think that Windows 7's new MediaCenter would be up to the task of recording your TV to a network share/drive. Too bad, it looks like it's just not possible. I have a windows 2008 R2 server, and a Windows 7 machine with a TV card. Since my server has 2TB of storage, it would be nice to record directly to it's networked drive. (I mounted it as Z:). I tried the following: Selecting it in Media Center Itself: Not working. Not available. Editing the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Recording , setting RecordPath to Z:\TV. Not working. Editing the registry: setting RecordPath to \\server\TV. Not working. Creating a Symlink (mklink \D) to Z:\TV and \\server\TV and setting that in the registry as RecordPath. Currently I am out of options. I could ofcourse Install Windows7 on my server, but I have no license for that, and my windows 2008 r2 is free from dreamspark. Are there people that are succesfully recording to a networked drive/storage? edit I also need to mention that I need to be able to acces the stored files from other PC's, like my laptop. So iSCSI is great for recording, but it looks like you can't access iSCSI devices from multiple PC's. Looks like sharing a iSCSI device is out of the question, so: Are there workarounds to get this thing recording to my network drive?

  Read the article

• Distributing processing for an application that wasn't designed with that in mind

  - by Tim

  We've got the application at work that just sits and does a whole bunch of iterative processing on some data files to perform some simulations. This is done by an "old" Win32 application that isn't multi-processor aware, so new(ish) computers and workstations are mostly sitting idle running this application. However, since it's installed by a typical Windows Install Shield installer, I can't seem to install and run multiple copies of the application. The work can be split up manually before processing, enabling the work to be distributed across multiple machines, but we still can't take advantage of multiple core CPUs. The results can be joined back together after processing to make a complete simulation. Is there a product out there that would let me "compartmentalize" an installation (or 4) so I can take advantage of a multi-core CPU? I had thought of using MS Softgrid, but I believe that still depends on a remote server to do the heavy lifting (though please correct me if I'm wrong). Furthermore, is there a way I can distribute the workload off the one machine? So an input could be split into 50 chunks, handed out to 50 machines, and worked on? All without really changing the initial application? In a perfect world, I'd get the application to take advantage of a DesktopGrid (BOINC), but like most "mission critical corporate applications", the need is there, but the money is not. Thank you in advance (and sorry if this isn't appropriate for serverfault).

  Read the article

• Small business server 2011 standard - applications randomly closing for remote desktop users

  - by Ash King

  Small business server 2011 standard - applications randomly closing for remote desktop users I have an issue where when you are connected through remote desktop (doesn't matter whether you have administrative rights or not). What happens: Any application that you run (outlook, word, excel, notepad, cmd etc..) the application will randomly crash and produce an error as such: Faulting application name: EXCEL.EXE, version: 14.0.6112.5000, time stamp: 0x4e9b2b30 Faulting module name: ieframe.dll, version: 8.0.7600.16930, time stamp: 0x4eeb0187 Exception code: 0xc0000005 Fault offset: 0x0000000000131e03 Faulting process id: 0x3d4c Faulting application start time: 0x01cecf3491388e43 Faulting application path: C:\Program Files\Microsoft Office\Office14\EXCEL.EXE Faulting module path: C:\Windows\System32\ieframe.dll Report Id: 1c06abd4-3b2b-11e3-bd8d-001999b270e9 I noticed the ieframe.dll, but its not constant for every application that crashes, e.g.: Faulting application name: OUTLOOK.EXE, version: 14.0.6109.5005, time stamp: 0x4e79b6c0 Faulting module name: PSTOREC.DLL_unloaded, version: 0.0.0.0, time stamp: 0x4a5be02a Exception code: 0xc0000005 Fault offset: 0x000007fef39c7158 Faulting process id: 0x43f8 Faulting application start time: 0x01cecf33fe5eec26 Faulting application path: C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE Faulting module path: PSTOREC.DLL Report Id: 0c0f5934-3b2b-11e3-bd8d-001999b270e9 I am unable to perform a sfc /scannow command due to the cmd.exe crashing as well.. I have performed a virus scan on the server which did originally pick up 5 viruses: riskware.tool.ck -> File riskware.tool.ck - > Memory Process trojan.agent.bdavgen -> File trojan.agent -> File HiJack.comsysapp -> Registry Data But after removing these and rebooting the machine we have had no luck Has anyone else ever come across this issue before? Also to elaborate it is happening as frequently as every minute.

  Read the article

• running a command as root with /bin/su and without gives different results

  - by n00bInCpp

  Some background: I have a machine with SLES 11 installed. I am running a bash script that one of its lines is /bin/su $USER -c SOME_CMD. Unfortunately, the SOME_CMD that comes after the -c keeps failing, no matter if USER=root or any different user. However, if /bin/su $USER -c part is omitted then everything runs smoothly. Moreover, I have run the script on RHEL5 and it worked fine. Anyway, my question is why does it happen? If it is a permissions problems then why when I run this as root with /bin/su and without I get different results? P.S. apologize if somebody else has asked it before, I have done many googling and got nothing that satisfies. Thanks in advance, n00bInCpp EDIT Okay, I figured it out, I hope so. Instead of running /bin/su I used /user/bin/sudo -u $MY_USER_1 MY_ENV_VAR="/home/user1" SOME_CMD. I don't understand why I have to use sudo, though. I am used to run a command as a different user using su and not worrying about permissions problems, but I guess it doesn't work like that on SLES 11/SuSE. Anyhow, thanks to everyone who wanted to or helped me.

  Read the article

• Hyper-V with multiple physical networks

  - by Yaman

  I have Hyper-V on my laptop with a wireless and Ethernet card, sometimes I connect using wireless card, and sometimes using the Ethernet cable. I am trying to configure Hyper-v to work always with internet provided to virtual machine. I have tried to create 2 virtual switches, one external to the Wireless network card, and the other one external to the Ethernet card. What happens is that the wireless network creates a bridge object in the network and sharing center\Network connections of windows 8, while the Ethernet does not. Unfortunately, they do not work together as external, i have to set the connected one to external and the other one as external, I also have to go to the properties of the bridge and virtual Ethernet properties to uncheck and check some components like: Client for Microsoft Networks Deterministic Network Enhancer VMWare Bridge Protocol QoS Packet Scheduler File and Printer Sharing for Microsoft Networks In order to make things work. Sometimes I keep the wireless network switch external, and go to another location (another wireless network), and it disconnects, i have to reconfigure the switches. Is there a way to do the configuration once and remain working wherever I connect, whether its Wireless or Ethernet and on any network with DHCP?

  Read the article

• Best way to troubleshoot intermittent network outages?

  - by Ben Scheirman

  We have a Comcast 50/10 line into our office. We keep seeing very short but sometimes frequent drops in our internet service. It's enough to kick you off of skype and stop any websites from loading, which is obviously affecting our productivity. We've tried 4 different routers, we've tried moving everyone off of wireless and onto wired via a switch and so far nothing has helped. Right now we're on a Cisco SB WRP400-G1 router. Attached to the router is a 16 port switch going to the ports in all of the offices. We've moved to OpenDNS in the case that it was the comcast DNS servers going down. Today we tried putting the modem, router, and switch on a UPS to make sure it wasn't power fluctuations that was causing it. Every time we call Comcast, by the time they are here the internet is working fine. I'd like to somehow prove that the problem is with Comcast, so if that means plugging in a machine directly into their router and collecting data all day, I'm up for that. I just want to hear ideas on what tools to run and how to collect this data. I could just continuously ping google.com all day long but I'm not sure how valuable that data would be. Thoughts?

  Read the article

• I go to www.facebook.com, but a completely different site appears.

  - by Rosarch

  I am going to www.facebook.com, but the site that appears is totally different. This occurs on Chrome 6+, IE9, and FF 3+. What could be happening? Is this a security risk? Facebook was working just fine, then all of a sudden this happened. Update: The same problem occurs on my netbook. Update 2: When I go to http://69.63.189.11/, it works fine. So... DNS problem? How do I fix? Update 3: Checked the hosts file: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost Looks like it hasn't been altered.

  Read the article

• Ubuntu in failed state after upgrade from 10.04 to 10.10 - How to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: 1. Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a). 2. gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok] 3. gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ... What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

• Can I format a usb stick on windows xp, in HFS+ format, and make the usb stick mac os x bootable?

  - by user717236

  My Intel Mac OS X computer is corrupt and I feel, at this point, I need to perform a fresh install of the OS. It consistently and automatically logs out, right after I log in. I tried logging in as the root. I tried safe boot and it wouldn't load. Anyway, the point is I want put the Mac OS X installer on a USB thumb drive and have it boot up on the Intel Mac OS X computer. Unfortunately, the computer is inaccessible, as I mentioned above. So, I have a Windows XP machine that I'm using and attempting to create a bootable USB thumb drive that's compatible with Mac OS X. I have tried transmac, macdrive, and paradox for windows -- all of which proved unable to format the usb stick in HFS+. How do I know this? Well, even though the Transmac reports that's been formatted to HFS+, Computer Management in Windows says otherwise: I even put the installer on the usb drive, after transmac reportedly formatted it properly, and the mac os x computer didn't even recognize that a USB thumb drive was inserted, via pressing the option key at boot-up time. I'm not sure what the problem is and how to actually format the drive. Can anybody offer any help? I would appreciate it. Thank you.

  Read the article

• 503 Error After Microsoft Request Routing Is Installed - 32 bit 64 bit madness

  - by KenB

  I have a requirement to install the Microsoft Request Routing component for IIS 7.5 running on a Windows 2008 R2 SP1 64Bit machine. After installing Microsoft Request Routing via the Web Platform installer our ASP.NET 4.0 application gets a "HTTP Error 503. The service is unavailable." The Windows event log error details says: The Module DLL 'C:\Program Files\IIS\Application Request Routing\requestRouter.dll' could not be loaded due to a configuration problem. The current configuration only supports loading images built for a AMD64 processor architecture. The data field contains the error number. To learn more about this issue, including how to troubleshooting this kind of processor architecture mismatch error, see http://go.microsoft.com/fwlink/?LinkId=29349. I can make this error go away by changing the application pool to run in 32 bit mode by changing the "Enable 32-Bit Applications" setting to true. However I would prefer not to have to do that to resolve the issue. My questions are: Why is the Microsoft Request Routing feature trying to load a 32 bit version, isn't there a 64 bit version for it? How do I resolve this issue without having to change my application pool to a 32 bit mode?

  Read the article

• Booting Ubuntu as VM with KVM on Ubuntu 12.04

  - by CrazycodeMonkey

  I am trying to boot my very first VM using KVM. I have Ubuntu 12.04 installed, i made sure the BIOS had the right virtualization flag enabled for intel processor by running kvm-ok. I have researched this on google and all the instructions that i have found so far are outdated. for e.g. most instructions talk about booting a virtual machine with the following commands qemu-img create -f qcow2 foo.img 100G --- create a virtual disk for your VM kvm --name foo -m 1024 -hda foo.img -cdrom whatever.iso -boot d -- This runs kvm. This command line is incomplete. First you need to be root to run this. Second- it is missing option for the video device. When you run this command you get the following error "Could not initialize SDL(No available video device) - exiting" Googled this error and looked it up on stackover flow http://stackoverflow.com/questions/4841908/sdl-init-failure-reason-is-no-available-video-device The answer provided here does not work on Ubuntu 12.04 Googled this problem further and found out that i need to specify a video device so I finally ran the following command sudo kvm --name mymachine -m 8096 -hda myimage.img --cdrom ubuntu.iso -boot d -vga cirruss -k en-us -vmc :0 This was after I had created the myimage.img image on the drive. Now this command does not give me an error but it just hangs. Does anyone have clear instructions on how to run a VM using KVM on Ubuntu?

  Read the article

• Virtualization in Ubuntu 9.10

  - by Jeff Dege

  I have an existing Centos 5 installation. I would like to upgrade to Ubuntu. Thing is, I don't want to be down for as long as it will take to get my entire environment moved over - software installed, connectivity configured, etc. I'd like to take it one step at a time. But I don't really want to keep rebooting back and forth from the new OS to the old OS. That's what I did last time I upgraded to a new OS, and it got old real fast. So, since my new MB is virtualization-ready (AMD Phenom II 945 quad-core), I figured I could create a virtual machine, under the new OS installation, that ran the old OS installation. The problem is that the documentation I've been able to find has been pretty sparse. I've found a lot of possibilities, and little info on which would be capable of doing what I want. I have a new Ubuntu 9.10 installation, and a second disk containing the Centos 5 installation. And I don't know where to go next. Any help would be appreciated.

  Read the article

• ssh-add insists on passphrase

  - by Sam Walton

  I have a new ssh key problem. I have successfully used them for years with Heroku, Git and other servers so I can login without having to issue a passphrase. A few weeks ago, I was unable to push a git repository on my machine to my Heroku and it responded with Permission denied (publickey). Hmm. Everything else but this Heroku function still works. So I ssh-keygen -t rsa -C "newHeroku" with no passphrase (hit return so it would be empty). So I enter: sudo chmod 600 ~/.ssh/newHeroku* Then: ssh-add ~/.ssh/newHeroku.pub Returning return for the passphrase asked it exits without error. The next step is to: ssh-add /Users/sam/.ssh/newHeroku.pub To verify that it's "live" I enter: ssh-add -l To which the output is still The agent has no identities. Okay, to eliminate variables, I repeat the key generation process but entering in a passphrase for a new key. I ssh-add the new key and get the "Enter passphrase" as expected. Now this is why I'm posting here and not on a Heroku blog because ssh-add fails because the passphrase I used keeps getting rejected. It appears, even though I have no problem with my keys elsewhere, that something is wrong with passphrase because even though I get no errors, I get errors when on the one that expects a passphrase. One question, should I expect the Passphrase request for ssh-add when I have not generated a passphrase? It's been suggested that this is a clue and I offer it. Or maybe I have a poor understanding of what ssh-add is doing. Wouldn't be the first time I asked a stupid Q. Also, I'm on Lion and have updated no system updates in the few weeks of this period except application updates.

  Read the article

• Reduce "Metafile" memory usage?

  - by Jay Conrod

  My work computer (Windows 7 64-bit) spends a lot of time swapping memory when I switch between programs. This surprises me since I have 4 GB of RAM, and the programs I use aren't particularly RAM hungry (Outlook, Emacs, p4win, Firefox, various build tools). I downloaded RAMMap, and it shows over a gigabyte of memory used by "Metafile". From the Sysinternals blog: Metafile is part of the system cache and consists of NTFS metadata. NTFS metadata includes the MFT as well as the other various NTFS metadata files. ... In the MFT each file attribute record takes 1k and each file has at least one attribute record. Add to this the other NTFS metadata files and you can see why the Metafile category can grow quite large on servers with lots of files. So I understand what the "Metafile" data is... I work on large builds comprising hundreds of thousands of files (none are that big, but they add up to several gigabytes). My question is how can I reduce the amount of memory used by "Metafile"? I'm not actively using all those files at once, so why does Windows need to keep info in RAM? Restarting my machine every time I sync a new build is really annoying.

  Read the article

• Problems installing Windows service via Group Policy in a domain

  - by CraneStyle

  I'm reasonably new to Group Policy administration and I'm trying to deploy an MSI installer via Active Directory to install a service. In reality, I'm a software developer trying to test how my service will be installed in a domain environment. My test environment: Server 2003 Domain Controller About 10 machines (between XP SP3, and server 2008) all joined to my domain. No real other setup, or active directory configuration has been done apart from things like getting DNS right. I suspect that I may be missing a step in Group Policy that says I need to grant an explicit permission somewhere, but I have no idea where that might be or what it will say. What I've done: I followed the documentation from Microsoft in How to Deploy Software via Group Policy, so I believe all those steps are correct (I used the UNC path, verified NTFS permissions, I have verified the computers and users are members of groups that are assigned to receive the policy etc). If I deploy the software via the Computer Configuration, when I reboot the target machine I get the following: When the computer starts up it logs Event ID 108, and says "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was: An operations error occurred." There are no previous log entries to check, which is weird because if it ever actually tried to invoke the windows installer it should log any sort of failure of my application's installer. If I open a command prompt and manually run: msiexec /qb /i \\[host]\[share]\installer.msi It installs the service just fine. If I deploy the software via the User Configuration, when I log that user in the Event Log says that software changes were applied successfully, but my service isn't installed. However, when deployed via the User configuration even though it's not installed when I go to Control Panel - Add/Remove Programs and click on Add New Programs my service installer is being advertised and I can install/remove it from there. (this does not happen when it's assigned to computers) Hopefully that wall of text was enough information to get me going, thanks all for the help.

  Read the article

• How to have PHP and mod_wsgi python app on the same domain?

  - by Lazik

  I am using apache with mod_wsgi (python3) on ubuntu 12.04. I have a python app (bottle) which is at www.mysite.com/ In my python app I have routes like www.mysite.com/abbb?q=blab I would like a path www.mysite.com/forum to resolve to a php app (simple machine forums) Ideally I would like to use apache to handle the forum part and pass it to php (instead of coding it in the python app). Don't know if it's possible. I'm new to this, I have read https://code.google.com/p/modwsgi/wiki/ConfigurationGuidelines#The_Apache_Alias_Directive but I don't understand how to use it. Here is my apache conf for the mod_wsgi app, I don't know how to specify the PHP portion. <VirtualHost *:80> ServerName www.ex.com ServerAlias ex.com *.ex.com RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}$1 [R=301,L] WSGIDaemonProcess ex user=www-data group=www-data processes=1 threads=5 WSGIScriptAlias / /var/www/vhosts/ex/app.wsgi <Directory /var/www/vhosts/ex> WSGIProcessGroup ex WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> </VirtualHost>

  Read the article

• ffmpeg: video file played OK on Ubuntu, but no sound on XP

  - by Andy Le

  I created a video clip using ffmpeg (vcodec: mpeg2video, acodec: AC3 5.1). The file can be played normally on Ubuntu, but when I play it on an XP machine, there is no sound. I can play AC3 files and other movies with AC3 sound. I already tried many codec packs and many players. When I compare the MediaInfo tab of the Properties window of the file with another playable movie, I see that the Audio Identifier of the audio stream in my file is 0x80 while it is 0x02 in the other movie. So I guess that's why players on XP can't recognize the audio codec. When I use an MKV container instead of MPEG (still mpeg2video codec), then the result is OK on both Ubuntu and XP (with the correct Audio ID). I really need MPEG though. Any idea? This is the command I used: ~/ffmpeg/ffmpeg/ffmpeg -loop_input \ -t 97 -r 30000/1001 -i v%4d.tga -i final.ac3 \ -vcodec mpeg2video -qscale 1 -s 400x400 -r 30000/1001 \ -acodec copy -y out6.mpeg 2 This is the output of mediainfo (on Ubuntu): General Complete name : out6.mpeg Format : MPEG-PS File size : 6.86 MiB Duration : 1mn 37s Overall bit rate : 593 Kbps Video ID : 224 (0xE0) Format : MPEG Video Format version : Version 2 Format profile : Main@Main Format settings, BVOP : No Format settings, Matrix : Default Format_Settings_GOP : M=1, N=12 Duration : 1mn 37s Bit rate mode : Variable Bit rate : 122 Kbps Width : 400 pixels Height : 400 pixels Display aspect ratio : 1.000 Frame rate : 29.970 fps Resolution : 8 bits Colorimetry : 4:2:0 Scan type : Progressive Bits/(Pixel*Frame) : 0.025 Stream size : 1.41 MiB (21%) Audio ID : 128 (0x80) Format : AC-3 Format/Info : Audio Coding 3 Duration : 1mn 36s Bit rate mode : Constant Bit rate : 448 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 44.1 KHz Stream size : 5.18 MiB (75%)

  Read the article

• Software to monitor bill payment to mission critical IT service providers (ISP, DNS etc.)

  - by Sholom

  Hi All, The Problem: Our very likable but absent minded bookkeeper keeps neglecting to pay our IT vendors on time. Just this past week our internet service was disconnected. Same could happen to many other mission critical accounts (domain registrar, backup MX, anti-virus license, HackerSafe (McAfee secure) service and even an 800 number to name a few). As the sysadmin, i monitor my severs to make sure they are plugged into the power-outlet. I believe i should also monitor my services to make sure they are plugged in to their money-outlet. To compound the problem, when the power goes out someone else will likely notice and notify me. But if a bill is not payed, no one will ever notice until service is lost. Lost as in losing our domain name which would cause a lot more damage then the power failing on our server. [Solution] = [Doesn't work because]: Retrain the bookkeeper = Wishful thinking. Notify my manager = Already have (via email). Protects me, does not solve problem. Fire bookkeeper = What makes you so sure the next one will never forget? Bottom line: Humans are humans and sooner or later something critical will be royally messed up. We need to partner with a machine to help us out here. Anybody have the same problem? What software/solution do you use? I would like software that emails me when a bill is passed due just like i get an email when the power outlet fails. Anyone hear of anything like that? Thanks

  Read the article

• Chrome pop-up blocker fail?

  - by Count Zero

  I have this problem since just a few days. I've been a heavy Chrome user for several years, but it never happened before: Sometimes absolutely uncalled for pop-ups appear, when I click something absolutely legit. It seems to happen at a very precise rate of two pop-ups every hour or so. The pop-ups are not very varied, it seems to be a fixed set of some 4-5 ads. At first I thought I caught some malware, but after a full scan with Malwarebytes Anti-Malware, I found absolutely nothing. In addition the problem exists only with Chrome. When I use Firefox, this never ever happens. What is even more puzzling is that it happens on both of my rigs and started on the same day. I have a removable storage that I dock to both of them and access one machine from the other via RDP, but still... It seems this is a problem that others face too. See this Google forum and here. Could it be that the latest Chrome build is just acting up? (Just in case it matters: I run Chrome version 24.0.1312.57 m on Win 7.)

  Read the article

< Previous Page | 666 667 668 669 670 671 672 673 674 675 676 677  | Next Page >