Search Results

Search found 31646 results on 1266 pages for 'third normal form'.

Page 671/1266 | < Previous Page | 667 668 669 670 671 672 673 674 675 676 677 678  | Next Page >

• IIS 7 Application Pools using a different amount of memory on multiple servers behind a load balancer

  - by Jim March

  We have 6 servers in a web farm behind an F5. There are approximately 25 AppPools on each of these servers. On servers 1 - 5 the apppools are consuming approx 500MB Private Bytes, and 5GB Virtual Bytes. On server 6 the apppools are consuming approx 800MB Private Bytes, and 8GB Virtual Bytes. I can not seem to figure out why we have this difference. The code is the exact same on each box. We replicate the apphost.config between the boxes, so the Appplication Configs are identical. The only difference seems to be that this box consumes more RAM, and in turn ends up using a lot more CPU. During Black Friday we observed the CPU on server 6 spiking to 100% and noticed that the % Memory Commit was also near 100%, while the rest of the farm was at closer to 50% utilization. Pulling the 6th server from the load balancer dropped CPU/Memory on the 6th server back to normal, and did not cause a noticeable strain on the other servers.

  Read the article

• Route a specific user's traffic via VPN but still allow local networking

  - by wbg

  So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific network interface (tun0 in my case). I've managed to send a specific user's traffic via the VPN following the answers given here: iptables - Target to route packet to specific interface? But unfortunately, when I run a server that connects to the Internet and has a web interface running on a local IP (127.0.0.1/192.168.0.*), all the Internet traffic correctly goes via tun0, but I'm unable to connect to the web interface from a local IP as a different user. When I log in as the VPN-ified user, I can access services running on local IPs, but other users/machines can't access any servers I start. Can anyone point me in the right direction?

  Read the article

• Why Java applicaiton is running slow for clients on Linux

  - by Darshani

  We have two linux servers which have Apache Tomcat Installed. One is running the Database, the other is running with Java application. More than 100 users are connected to the servers. Server machines are quad core normal PC's which have 4 GB memory. It was running properly for the last 6 months but the application has recently started to run slowly . Suddenly the Java application is getting stuck & users cannot work for some time. There is no network issue. I am trying to identify the reason for this, whether it is a machine problem or the problem is in the Java application. Can any body help me with this?

  Read the article

• Windows PC's Intermittant Network faults.

  - by Kristiaan

  Hello everyone, im running into some issues with our client PC's (windows xp sp3 systems). this morning we ran into some problems with PC's not connecting to internal / external systems intermittantly. this would manifest as a problem connecting to any service, email, web, backoffice database systems etc. given a random amount of time be it a few minutes etc the problem would disapear and the pc would carry on as normal, some systems however have not been able to connect to certain sytems since the problem initally happened. im hoping for some suggestions / network diag advice really to help me locate the cause of this problem. all the clients are windows xp, connecting to a domain controller that is windows 2003 std this server also acts as a DNS server for us. we also have websense 7.0.1 installed on it to filter traffic.

  Read the article

• sql server express

  - by neil

  I use MS Acess as the front end. Loaded SQL Server 2008 R2 on my laptop. On my laptop (which I want to run the sql/access locally), there is no drop down listing. Under my normal Network (Sql 2000 enterprise edition) condition, the server name is part of the drop down listing. Finally got an ODBC positive test by manually listing in the system dns ODBC connection 'computername\sqlexpress'. Nonetheless, can not get an ODBC connection from Access. How can I get it working?

  Read the article

• Bay Speaker Panel Installation

  - by JordanD

  I purchased a bay speaker panel that has a molex connector and a sound connector. Do I need to run the sound connector through my tower and somehow out the back into the IO panel? Or is there supposed to be a place on my motherboard for it to connect to? This is a replacement for normal desktop speakers for me to save desk space. Edit: Is there an adapter for the sound cable to the mother board? If so; what is it called? Thanks

  Read the article

• Creating a command that compress a file and save it on a usb, but cannot detect the usb in linux.

  - by Lance

  First of all I can't detect the USB on linux using the command line. I check the directory dev and still cannot find the usb. used the df command to check the usb. I plug and typed df and then unplug and typed df again and nothing changed. We are using a server(telnet) to use the command line of linux on a windows 7 OS. The second problem I have is how can I execute the bash script that I have made. It seems that I cant put my .sh file in /usr/bin/ I would like to make my command executable in all directories like a normal command. Sorry, im still newbie at this things. This is what I get on staying on Windows too much. Sorry for my english. Thank you in advance.

  Read the article

• Windows 7 RDP Fullscreen mode

  - by kubal5003

  I have a problem with remote desktop connection in Windows 7. When I connect to remote computer I would like to switch to fullscreen like I did in previous versions - just by clicking maximize. When I was in fullscreen mode and I moved the mouse to the upper border of the screen a nice bar appeared and I could minimize rdp or close it. In Windows seven when I click on the maximize button the window maximizes like a normal window - menu start/taskbar(whatever you call it) is still visible and because the resolution of the rdp client desktop is set like on the computer that I'm using it's not fully visible and scrollbars appear. That's really annoying. Can anyone tell me what to do? Is it a bug or maybe there is a "magic shortcut" that is poorly documented and does the trick? (I was trying to find it myself first ofcoz, but no result)

  Read the article

• Creating ip alias on bonded interface ie. bond0:1

  - by bobothechimp

  System: HP Proliant DL360 G5 running CentOS 5.4 Bonded interface is working fine for a long time. I just went to add an alias the way I always have on a regular interface, and on first check it works (pinging on the local box) but it is not accessable from outside (iptables is turned off). In addition with this setup the normal network response started to decline, hanging for around a minute before I could get a prompt on login. Here are my config files: [root network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-bond0 DEVICE=bond0 BONDING_OPTS="mode=1 miimon=100" BOOTPROTO=none ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.11 USERCTL=no [root network-scripts]# cat ifcfg-bond0:1 DEVICE=bond0:1 BOOTPROTO=static ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.12 USERCTL=no any thoughts?

  Read the article

• Where are messages on Windows Mobile stored? [closed]

  - by user553702

  Where does Windows Mobile 6.0 store text messages that are in Outlook Mobile? I have not been able to find any information on the Web about where physically in the phone's filesystem the mailbox data is stored. I need to back up certain saved text messages before they are automatically overwritten, yet Microsoft provides no way at all to liberate the data. The device is a Palm Treo, and I can connect with Windows through ActiveSync and browse the filesystem, but I have no idea where to start. I may need to use some of this message history for legal purposes and it is important that I be able to preserve it. The normal Outlook on PCs uses .pst files to store a mailbox; is there something similar in Outlook Mobile?

  Read the article

• Raid 5 scsi fault

  - by HaLaBi

  I have no much knowledge about servers and I was looking all day around the internet about finding a solution to my raid 5 problem. All of a sudden two disks failed. The server won't boot (HP Proliant, windows 2003 R2, very old maybe 10 years old). I know that if one disk is faulty then I can add a new disk and rebuild it and things will be fine, the problem is two went faulty :( is this normal? two at the same time? is there any other thing I can do and I am not aware of? other than taking them out and reinserting them back? Windows won't boot. The Array menu shows that disks 0 and 4 are "Missing". Any other tricks or things to do? It is important because for some unknown reason the back up job did not work for a month and I just found out, so I need to make these raid 5 back online again.

  Read the article

• I have problem with pc. Random reboots with post hyper transport sync flood error

  - by user29867

  I have problem with my pc. Random reboots with post "hyper transport sync flood" error. It happens completely random. Most times i watch movie, some times when i play a game, even when i browse internet. My spec are as follow: MB ASUS M4A78-E CPU Phenom II 940 Sapphire Radeon hd4850 Vapor-X RAM OCZ DDR2 PC2-8500 kit 2x2GB PSU CM Real Power M520W CASE CM Centurion 590 Temps of MB, CPU and 4850 are in normal range. MB is hooter, around 60-70°C under load, Radeon 60-65°C under load (playing game for couple hours). CPU dos not past 50-55°C. So i think its not a cooling problem, CM case is pretty good, and have a lots of fans. I try with this memmory: TWIN2X4096-6400C5DHX same problem.

  Read the article

• Web Content Filtering for Windows Clients

  - by djoyce

  I'm working with a small business to solve a bunch of problems. One is their Windows 7 POS registers need to have web access restricted to only three remote support sites, but the back office machine needs an unfiltered connection. I'd like something I can install and configure on the few registers to block all but those few sites. In a perfect world this would restrict the normal register user, but the admin user would not be filtered. Free is best, if it works, but a small fee would be alright too. Microsoft's Family Safety filter is close, but requires a Windows Live account, which isn't ideal, but may be alright. Anyone use this in a small business environment? I'd prefer something easily managed at the local machines. K9 Web Protection is interesting and I'm going to look into it more. Are there other options? Seems like someone would have made something simple like this as an open source project, but maybe not.

  Read the article

• Run preseed commands as specific user / switching users

  - by pduersteler

  Beside the usual setup where I create a normal user foo, I want to run a few d-i preseed/late_command commands as that foo user. My initial thought was to simply call those commands with sudo, e.g: d-i preseed/late_command in-target echo "<pwd>" | sudo -Si <command>. This works for some sort of commands. However the problem is that some of the commands load up shell scripts which require to not be run with sudo. Issuing a su -c "<command>" would be an alternative, but su does not offer the possibility to read the password from stdin. Is it safe to jump around between the users using su (And if yes, how do I provide the stdin? and does it work or just result in a su: must be run from a terminal) or would this cause issues?

  Read the article

• why vim script change inside visual area not work?

  - by avalan_che

  Say a webpage like this: ... <div class="block"> <p>...</p> <p>...</p> </div> <p>...</p> ... I tried to add class="cls" to <p>s inside <div class="block">, so I did: while search('div class="block"','W') 0 normal vat '<,'>s@<p@<p class="cls"@gec endw but this wouldn't work as expected: those <ps outside <div class="block" got changed too. In command window these lines totally work, why not putting together?

  Read the article

• Internet connection too slow

  - by user23950

  I now think that it is the ISP. After a full scan of my system. With super antispyware, avast, norton and spybot. Internet connection is still slow. And the truth is we have recently upgraded the connection from 512 kbps to 768. And I get a .25 Mbps at speedtest.net which is equivalent to 256 Kbps. Its not even half of the advertised speed. Is it normal for ISP's to just limit your bandwidth if you are always downloading something from the internet? Are they entitled to do this.

  Read the article

• How can I pin point a USB file transfer bottleneck in Unix?

  - by HankHendrix

  I'm experiencing very slow data transfer speeds over USB 2.0 on my nix box and was wondering how I can pin-point the cause of the problem. I've looked into iotop and top but the cpu and mem figures look normal (compared to guides I have checked). The box which is affected is Ubuntu 12.04 32bit Server running on an Asus EEE 701 2G model and I am transferring from the OS over USB 2.0 to an external HDD (which transfers at 30MB/s+ on Windows 7 on other machine). I get rsync write speeds of 1MB/s from OS to USB HDD which seems ridiculously slow. These speeds are consistent with other USB HDDs and sticks.

  Read the article

• Server 2008 R2 file access permissions

  - by Napster100

  I'm finding it awkward to sort out permissions for file sharing and access on my LAN. I've created an account on the server node (as a normal user) and shared a drive that has 2 folders at the root, one is for personal file storage and the other shared files, if I connect to the shared area from a workstation running windows 7 and log-in using the account I created on the server, I can look through directories but can't look in some (which I wanted as I changed the permissions for that to happen), but my problem is although the permissions are set for this user account to have full control of the specific folder I can't create a folder in that area or upload files to that folder. Could someone explain why this is? Thanks in advanced

  Read the article

• Multiple redirects / rewrites within one VirtualHost group

  - by Benjamin Dell

  Hi, I have a client that now wants to point a couple of dozen urls to their main site. I have added them as serveralias's in the sites apache config file... so now all of these urls point to the primary one... excellent. The problem i have is that if ANY of these alias's are accessed at the root (i.e. www.domain.com rather than www.domain.com/some-page/) then i need to redirect them to a specific page within the site (i.e. anyone accessing domain.com might need to be sent to domain.com/special-landing-page/). However, any visit to anything other than the landing page should just continue as normal without any re-directs. I've been battling with this for a few hours and can't seem to find the best solution. Does anyone have any suggestions?

  Read the article

• Possible causes for Domain server being unavailable?

  - by serversurfer

  One of our servers was compromised after a user with administrative privileges accidentally loaded a virus from a USB drive on a desktop connected to the domain. The two most obvious symptoms of this were: The server is no longer responding to login attempts The root directory of the drive containing user data has been filled with randomly named empty folders. (Initially it was around a million folders, I've been slowly deleting them.) I've run several virus scans from different vendors and am fairly confident the virus has been removed but the damage is done. I'm hoping the two symptoms are related and that once the directories are gone the server will start responding again. The drive is very slow to respond. I'm deleting about 20k folders at a time. Anymore than that and windows explorer becomes unresponsive. In the event that I finish cleaning up the HD and things don't return to normal what other things can I check?

  Read the article

• PHP and load balancing

  - by StCee

  I have one major domain but the server spec behind it is not good enough. Hence I want to relay the traffic, in particular php-mysql queries to multiple smaller servers. How is that normally be done? (BTW I wonder how much traffic or number of php/mysql request a normal setup on ec2 micro instance can handle? ) I did have a look of EC2 load balancer. But is it only possible to load balance on machines of your own account?

  Read the article

• Solaris 11 installed, no updates?

  - by Paul De Niro

  I was messing around with solaris and decided to give Solaris 11 a try so I downloaded it from the Oracle website. After installing the OS, I went into the package manager and did an update. It told me that there were to available updates! I find this hard to believe considering that it's running a vulnerable version of firefox and java, its own in-house software product! Many of the other software products that came with the default install are also out of date and vulnerable. Is this normal for an Oracle install, or did I do something wrong with the upgrade process? I typed "pkg update" at the prompt, and I noticed that it did call out to pkg.oracle.com looking for updates. I find it bizarre that there are no updates available for an OS that was released a couple months ago with vulnerable software...

  Read the article

• trouble with AD and profile import

  - by GeorgeWNYC

  I am involuntary Admin for a MOSS 2007 site. We use profile import from AD, from two domains: Mycompany.com and AM.MyCompany.Com I was looking at the log for the PEOPLE_DL_IMPORT Content source and it has many entries like: spsimport://?$$dl$$/MyCompany.com/MyCompany.com/MyCompany.com/am.MyCompany.com/MyCompany.com/am.MyCompany.com/MyCompany.com/am.MyCompany.com/am.MyCompany.com/MyCompany.com/am.MyCompany.com/am.MyCompany.com/am.MyCompany.com/MyCompany.com/MyCompany.com/am.MyCompany.com/am.MyCompany.com It certainly doesn't look right. Is this normal? What can I do to remedy it ? Can I start over? There are users already in SP and some of them are in SP groups for permission purposes.

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works fine

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

• Make words look like keystrokes in Microsoft Word

  - by techturtle

  Is there an easy way in Microsoft Word 2010 to make words appear like keystrokes the way we can here in Superuser? Something like this: Ctrl + V I know that <kbd> is an HTML tag, but in normal HTML that just switches to a fixed-width font. In fact, that's how Word treats it if you paste something from SU into a Word doc: If there's not a standard way to do this in Word, is there a free font that might accomplish the same thing? I thought I'd seen some before but couldn't find any at the regular places I find fonts (dafont.com, fontspace.com).

  Read the article

< Previous Page | 667 668 669 670 671 672 673 674 675 676 677 678  | Next Page >