Search Results

Search found 20336 results on 814 pages for 'connection strings'.

Page 673/814 | < Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >

  • Lion server profile manager, device enrollment doesn't work

    - by user964406
    I am in the process of setting up Lion Servers profile manager to manage iPads on our local school network. I don't need to manage them while they are outside the network. I have successfully had it working on my personal network. The school network is behind a proxy which we have no control over. I can get the iPads to view the mydevices page and install a trust cert. I have managed to get an iPad to successfully install the remote management profile. After this the profile manager bugs out. It will list the active task of 'new device (sending)' but it's unable to complete the task. If I click on the device on profile manager and try any of the actions out they will all fail to complete. I am using the auto generated certificates and this works if I bring the server and iPad outside of the school network. Shortly after device enrollment the system log on the Lion server reports the following Replaced the actual ip address with INTERNALIP Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini applepushserviced[778]: Got connection error Error Domain=NSPOSIXErrorDomain Code=1 "The operation couldn\u2019t be completed. Operation not permitted" UserInfo=0x7fa483b1a340 {NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS} Jun 4 08:40:53 mini applepushserviced[778]: Failed to get client cert on attempt 2, will retry in 15 seconds Does anyone have any ideas on how to get past this stage? Thanks in advance.

    Read the article

  • Use synergy with Physical KVM

    - by Mr. Man
    I am using synergy on a Linux Mint computer as the server with a Mac as the client. I also have a physical KVM switch. The problem I have is that when ever I switch the physical KVM to my Mac, synergy stops working as in the keyboard and mouse don't work with the Mac. Thanks in advance! EDIT: here are some logs: From the Mint machine: INFO: synergys.cpp,1042: Synergy server 1.3.1 on Linux 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 DEBUG: synergys.cpp,1051: opening configuration synergy.conf DEBUG: synergys.cpp,1062: configuration read successfully DEBUG: CXWindowsScreen.cpp,847: XOpenDisplay(:0.0) DEBUG: CXWindowsScreenSaver.cpp,339: xscreensaver window: 0x00000000 DEBUG: CXWindowsScreen.cpp,117: screen shape: 0,0 1024x768 DEBUG: CXWindowsScreen.cpp,118: window is 0x03800004 DEBUG: CScreen.cpp,38: opened display DEBUG: CXWindowsScreen.cpp,679: registered hotkey F12 (id=efc9 mask=0000) as id=1 NOTE: synergys.cpp,500: started server INFO: CServer.cpp,1141: screen ubuntu shape changed NOTE: CClientListener.cpp,127: accepted client connection DEBUG: CClientProxy1_0.cpp,404: received client marks-mac.local info shape=-1024,0 2304x800 NOTE: CServer.cpp,278: client mac has connected INFO: CServer.cpp,447: switch from ubuntu to mac at -1024,393 INFO: CScreen.cpp,116: leaving screen DEBUG: CXWindowsClipboard.cDEBUG: CXWindowsClipboard.cDEBUG: CXWindowsClipboard.cDEBUG: CXWindowsClipboard.cDEBUG: CXWindowsClipboard.cDEBUG: CXWinavDEBUG: CXWindowsClipboard.cDEBUG: CXWindowsClipboard.cDEBUG302)DEBUG: CXWindowsClipboard.cDEBUG: CXWindowsClipboard.cDE47DEBUG: CXWindowsClipboard.cDEBUG: CXWindowsrset=utf-8 (633), text/plain (462) DEBUG: CXWindowsClipboard.cpp,555: added fDEBUG: CXWindowsClipboard.cpp,555: added f DEBUG: CXWindCXWDEBUG: CXWindowsClipboard.cpp,555: added fDEBUG:SerDEBUG: CXWindowsClipboard.cpp,555: ed DEBUG: CXWindowsClipboard.cpp,555: added fDEBUG: CXWindowsClipboard.cpp,555owsClDEBUG: CXWindowsClipboard.cpp,555: 1DEBUG: CXWindowsClipboard.cpp,555: added fDEBUG: getDEBUG: CXWindowsClipboard.cpp,555: added f DEBUG: CXW8_STDEBUG: CXWindowsClipboard.cpp,555: added fDEBUG: CXWindowsClipboard.cpp,555: added fD textDEBUG: CXWindowsClipboard.cpp,555: added fDEBU DEBUG: CXWindowsClipboard.cpp,555: added fDEBUG: CXWindowsClipinDEBUG: CXWindowsClipboard.cpp,555:oardDEBUG: CXWindowsClipboard.cpp,555: added fDEBUG: CXWindowsClipboard.cpp,555: added fDEBUG: CXWindCXWDEBUG: CXWindowsClipboard.cpp,555: added fDEBUG:SerDEBUG: CXWindowsClipboard.cpp,555: ed DEBUG: CXWindowsClipboard.cpp,555: added fDEBUG: CXWindowsClipboard.cpp,555owsClDEBUG: CXWindowsClipboard.cpp,555: 1DEBUG: CXWindowsClipboard.cpp, s From the Mac: connecting to '192.168.3.5': 192.168.3.5:24800 connected to server entering screen leaving screen entering screen leaving screen stopped client

    Read the article

  • Unable to receive any emails using postfix, dovecot, mysql, and virtual domain/mailboxes

    - by stkdev248
    I have been working on configuring my mail server for the last couple of weeks using postfix, dovecot, and mysql. I have one virtual domain and a few virtual mailboxes. Using squirrelmail I have been able to log into my accounts and send emails out (e.g. I can send to googlemail just fine), however I am not able to receive any emails--not from the outside world nor from within my own network. I am able to telnet in using localhost, my private ip, and my public ip on port 25 without any problems (I've tried it from the server itself and from another computer on my network). This is what I get in my logs when I send an email from my googlemail account to my mail server: mail.log Apr 14 07:36:06 server1 postfix/qmgr[1721]: BE01B520538: from=, size=733, nrcpt=1 (queue active) Apr 14 07:36:06 server1 postfix/pipe[3371]: 78BC0520510: to=, relay=dovecot, delay=45421, delays=45421/0/0/0.13, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied) Apr 14 07:36:06 server1 postfix/pipe[3391]: 8261B520534: to=, relay=dovecot, delay=38036, delays=38036/0.06/0/0.12, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3378]: 63927520532: to=, relay=dovecot, delay=38105, delays=38105/0.02/0/0.17, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3375]: 07F65520522: to=, relay=dovecot, delay=39467, delays=39467/0.01/0/0.17, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3381]: EEDE9520527: to=, relay=dovecot, delay=38361, delays=38360/0.04/0/0.15, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3379]: 67DFF520517: to=, relay=dovecot, delay=40475, delays=40475/0.03/0/0.16, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3387]: 3C7A052052E: to=, relay=dovecot, delay=38259, delays=38259/0.05/0/0.13, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3394]: BE01B520538: to=, relay=dovecot, delay=37682, delays=37682/0.07/0/0.11, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:07 server1 postfix/pipe[3384]: 3C7A052052E: to=, relay=dovecot, delay=38261, delays=38259/0.04/0/1.3, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:39:23 server1 postfix/anvil[3368]: statistics: max connection rate 1/60s for (smtp:209.85.213.169) at Apr 14 07:35:32 Apr 14 07:39:23 server1 postfix/anvil[3368]: statistics: max connection count 1 for (smtp:209.85.213.169) at Apr 14 07:35:32 Apr 14 07:39:23 server1 postfix/anvil[3368]: statistics: max cache size 1 at Apr 14 07:35:32 Apr 14 07:41:06 server1 postfix/qmgr[1721]: ED6005203B7: from=, size=1463, nrcpt=1 (queue active) Apr 14 07:41:06 server1 postfix/pipe[4594]: ED6005203B7: to=, relay=dovecot, delay=334, delays=334/0.01/0/0.13, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:51:06 server1 postfix/qmgr[1721]: ED6005203B7: from=, size=1463, nrcpt=1 (queue active) Apr 14 07:51:06 server1 postfix/pipe[4604]: ED6005203B7: to=, relay=dovecot, delay=933, delays=933/0.02/0/0.12, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) mail-dovecot-log (the log I set for debugging): Apr 14 07:28:26 auth: Info: mysql(127.0.0.1): Connected to database postfixadmin Apr 14 07:28:26 auth: Debug: sql([email protected],127.0.0.1): query: SELECT password FROM mailbox WHERE username = '[email protected]' Apr 14 07:28:26 auth: Debug: client out: OK 1 [email protected] Apr 14 07:28:26 auth: Debug: master in: REQUEST 1809973249 3356 1 7cfb822db820fc5da67d0776b107cb3f Apr 14 07:28:26 auth: Debug: sql([email protected],127.0.0.1): SELECT '/home/vmail/mydomain.com/some.user1' as home, 5000 AS uid, 5000 AS gid FROM mailbox WHERE username = '[email protected]' Apr 14 07:28:26 auth: Debug: master out: USER 1809973249 [email protected] home=/home/vmail/mydomain.com/some.user1 uid=5000 gid=5000 Apr 14 07:28:26 imap-login: Info: Login: user=, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3360, secured Apr 14 07:28:26 imap([email protected]): Debug: Effective uid=5000, gid=5000, home=/home/vmail/mydomain.com/some.user1 Apr 14 07:28:26 imap([email protected]): Debug: maildir++: root=/home/vmail/mydomain.com/some.user1/Maildir, index=/home/vmail/mydomain.com/some.user1/Maildir/indexes, control=, inbox=/home/vmail/mydomain.com/some.user1/Maildir Apr 14 07:48:31 imap([email protected]): Info: Disconnected: Logged out bytes=85/681 From the output above I'm pretty sure that my problems all stem from (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ), but I have no idea why I'm getting that error. I've have the permissions to that log set just like the other mail logs: root@server1:~# ls -l /var/log/mail* -rw-r----- 1 syslog adm 196653 2012-04-14 07:58 /var/log/mail-dovecot.log -rw-r----- 1 syslog adm 62778 2012-04-13 21:04 /var/log/mail.err -rw-r----- 1 syslog adm 497767 2012-04-14 08:01 /var/log/mail.log Does anyone have any idea what I may be doing wrong? Here are my main.cf and master.cf files: main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = server1.mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all # Virtual Configs virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous virtual_transport=dovecot dovecot_destination_recipient_limit = 1 master.cf: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}

    Read the article

  • Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

    - by npmj
    I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

    Read the article

  • D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

    - by axk
    I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

    Read the article

  • Sshfs is not working..

    - by Devrim
    Hi, When I run sshpass -p 'mypass' sshfs 'root'@'68.19.40.16':/ '/dir' -o StrictHostKeyChecking=no,debug It successfully mounts but it runs on foreground. When I run without 'debug' parameter, it doesn't mount at all. Server is ubuntu 8.04 Any ideas why? UPDATE: When I run the command as ROOT it does mount. It doesn't work with other users. here is the output of an unsuccessful mount $ sshpass -p 'pass' sshfs 'root'@'68.1.1.1':/ '/s6' -o StrictHostKeyChecking=no,sshfs_debug,loglevel=debug debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 68.1.1.1 [68.1.1.1] port 22. debug1: Connection established. debug1: identity file /var/www/vhosts/devrim.kodingen.com/.ssh/id_rsa type -1 debug1: identity file /var/www/vhosts/devrim.kodingen.com/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.7p1 Debian-8ubuntu1.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY Warning: Permanently added '68.1.1.1' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /var/www/vhosts/devrim.kodingen.com/.ssh/id_rsa debug1: Trying private key: /var/www/vhosts/devrim.kodingen.com/.ssh/id_dsa debug1: Next authentication method: password debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_GB.UTF-8 debug1: Sending subsystem: sftp Server version: 3 debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: Killed by signal 1.

    Read the article

  • Why do I have untrusted certificates for Google, Yahoo, Mozilla and others?

    - by jackweirdy
    In the HTTPS/SSL section of chrome://chrome/settings, I see the following: What does this mean, and is there something wrong? I have a basic understanding of SSL/TLS - I'm not claiming to be completely familiar, but I'm fairly confident I know my way around it - but I don't understand why I have certificates installed on my machine specifically for these sites. From my understanding, I should have the certificates for Certificate Authorities, and any site I visit and use SSL/TLS should have a certificate signed by one of these trusted CAs for me to trust the site. My worry is that if someone has maliciously installed a certificate for these sites on my machine, they could perform a DNS spoofing attack (or a number of other attacks) to hijack my connection to my email account without me knowing, and as they've got the private counterpart to the certificate on my machine, decrypt the communication. NB: I'm also aware that CA certificates aren't just within Chromium and are used system wide as part of libssl - they're stored in /etc/ssl/certs. What I'd like to know is: Is this correct? - The big red boxes make me think no Is this malicious or benign? What can I do to resolve this problem? (If indeed it is a problem) Thanks :)

    Read the article

  • saslauthd authentication error

    - by James
    My server has developed an expected problem where I am unable to connect from a mail client. I've looked at the server logs and the only thing that looks to identify a problem are events like the following: Nov 23 18:32:43 hig3 dovecot: imap-login: Login: user=, method=PLAIN, rip=xxxxxxxx, lip=xxxxxxx, TLS Nov 23 18:32:55 hig3 postfix/smtpd[11653]: connect from xxxxxxx.co.uk[xxxxxxx] Nov 23 18:32:55 hig3 postfix/smtpd[11653]: warning: SASL authentication failure: cannot connect to saslauthd server: No such file or directory Nov 23 18:32:55 hig3 postfix/smtpd[11653]: warning: xxxxxxx.co.uk[xxxxxxxx]: SASL LOGIN authentication failed: generic failure Nov 23 18:32:56 hig3 postfix/smtpd[11653]: lost connection after AUTH from xxxxxxx.co.uk[xxxxxxx] Nov 23 18:32:56 hig3 postfix/smtpd[11653]: disconnect from xxxxxxx.co.uk[xxxxxxx] The problem is unusual, because just half an hour previously at my office, I was not being prompted for a correct username and password in my mail client. I haven't made any changes to the server, so I can't understand what would have happened to make this error occur. Searches for the error messages yield various results, with 'fixes' that I'm uncertain of (obviously don't want to make it worse or fix something that isn't broken). When I run testsaslauthd -u xxxxx -p xxxxxx I also get the following result: connect() : No such file or directory But when I run testsaslauthd -u xxxxx -p xxxxxx -f /var/spool/postfix/var/run/saslauthd/mux -s smtp I get: 0: OK "Success." I found those commands on another forum and am not entirely sure what they mean, but I'm hoping they might give an indication of where the problem might lie. If it makes any difference, I'm running Ubuntu 10.04.1, Postfix 2.7.0 and Webmin/ Virtualmin.

    Read the article

  • switchless Infiniband between two servers on RHEL 6.3

    - by exfizik
    I have 2 servers running RHEL 6.3 which have 2 port Infiniband cards >lspci | grep -i infini 07:00.0 InfiniBand: QLogic Corp. IBA7322 QDR InfiniBand HCA (rev 02) I'm interested in connecting them directly to each other bypassing an Infiniband switch (which I don't have). Quick googling showed that at least in some configurations it's possible. I installed all RedHat Infiniband packages with yum groupinstall "Infiniband Support". However, ibv_devinfo shows that both ports in each card are down, which indicates that cables are not connected. But the cable is connected, although the LEDs are off on the cards (not a good sign). Another source of confusion for me is that according to this, RedHat doesn't come with OFED packages and I'm slightly hesitant to install them from source due to the lack of RedHat support for them... So where am I going with this? The questions I have are: is it possible to have a switchless/direct Infiniband connection between two servers the way I described above? If it's possible, do I have to use the OFED packages or can I configure everything with just the packages coming with RHEL. Why are the LEDs off on my servers even though the cable is connected? Any additional input/advice/pointers would be appreciated. P.S. I followed this guide for installation instructions. The Infiniband cards are clearly recognized by my OS and the rdma service is running. Update: I have opensm installed. When I run it it says: OpenSM 3.3.13 Command Line Arguments: Log File: /var/log/opensm.log ------------------------------------------------- OpenSM 3.3.13 Entering DISCOVERING state Using default GUID 0x1175000076e4c8 SM port is down and stays at that point.

    Read the article

  • How can a CentOS 6 guest running in VirtualBox be configured as a LAMP server that can be accessed from the Windows host?

    - by jtt89
    I was able to conect Centos6 on Virtual Box to Windows (I can ping in both directions) with Host-only Adapter (for connection between the two) and NAT Adapter (to enable Linux on VB to connect to the Internet). I want to set up httpd, mysql and vsftpd servers and in the end easily connect to httpd from Windows based browser and ftp server with a Windows based client as well. I would also want to have access through SSH. I have a general idea of the steps that are involved, but there is also a configuration that I am not sure about at this point. Lets say I follow these steps: yum install httpd yum install php php-pear php-mysql yum install mysql-server mysql_secure_installation yum install vsftpd yum install mod_ssl Technically I have everything installed, but what would be the next steps that I need to take (from the networking point of view, so to speak) to get it all working)? I know I need to configure, at least Apache, and ftp server, but I am not sure how is it gonna work; like where am I gonna be uloading the sites (I know this can vary), how am I gonna know what address to use in a browser if I wanna go to a website x, y, z on that installation etc. This sounds like I need to do some kind of DNS setup and I am kind of stuck at this point. If somebody could give me a general outline of what are the things that need to be done that would be great (I was looking at a lot of websites and I know about etc/sysconfig/network, httpd.config - not too much about it on Apache's site, hostname, hostname -f etc; but it is kind of hard to piece it all together at this point). I am gonna be looking at the books also, but they not always reflect the setup that I have too (VirtualBox). Thank you.

    Read the article

  • Set default MySQL connect charset for PHP (in RHEL)?

    - by Martijn Heemels
    We're running a hundred or so legacy PHP websites on an older server which runs Gentoo Linux. When these sites were built latin1 was still the common charset, both in PHP and MySQL. To make sure those older sites used latin1 by default, while still allowing newer sites to use utf8 (our current standard), we set the default connect charset in php.ini: mysql.connect_charset = latin1 mysqli.connect_charset = latin1 pdo_mysql.connect_charset = latin1 Specific more modern sites could override this in their bootstrapping code with: <?php mysql_set_charset("utf8", $dsn ); ...and all was well. Now the server is overloaded and we're no longer with that hoster, so we're moving all these sites to a faster server at our standard hoster, which uses RHEL 5 as their OS of choice. In setting up this new server I discover to my surprise that the *.connect_charset directives are a Gentoo specific patch to PHP, and RHEL's version of PHP doesn't recognize them! Now how do I set PHP to connect to MySQL with the latin1 charset? I thought about setting a default in my.cnf but would prefer not to force every app and client to default to latin1. Our policy is to use utf8, and we'd like to restrict the exception to PHP only. Also, converting every legacy site to properly use utf8 is not doable since many are of the touch 'm and you break 'm kind. We simply don't have the time to go fix them all. How would I set a default mysql/mysqli/pdo_mysql connection charset to latin1 for PHP, while still allowing individual scripts to override this to utf8 with mysql_set_charset()?

    Read the article

  • VRF Internet Gateway Multiple External IP's 1 Internal IP to AWS

    - by user223903
    Trying to setup VRF for the first time and its not working for me even though I keep reading everything online. IP's are different to real life. I have an Internet connection which I can ping to my router in the current setup below 195.45.73.22 I have a block of ip addresses 195.45.121.0/27 I want to setup multiple VPN's to AWS so need to have multiple external ip's thus the block of IP addresses. I have setup the 2nd and 3rd IP address but can not ping them from external. Any help would be grateful. Bryan ip source-route ! ip vrf Internet rd 1:1 route-target export 1:1 route-target import 1:1 ip vrf AWSSydney1 rd 2:2 route-target export 2:2 route-target import 2:2 route-target import 1:1 ip vrf AWSSydney2 rd 3:3 route-target export 3:3 route-target import 3:3 route-target import 1:1 ip cef no ip domain lookup no ipv6 cef multilink bundle-name authenticated interface FastEthernet0/0 description Vocus Internet no ip address speed 100 full-duplex interface FastEthernet0/0.1 encapsulation dot1Q 1 native ip address 195.45.73.22 255.255.255.252 interface FastEthernet0/0.2 encapsulation dot1Q 2 ip vrf forwarding AWSSydney1 ip address 195.45.121.1 255.255.255.224 interface FastEthernet0/0.3 encapsulation dot1Q 3 ip vrf forwarding AWSSydney2 ip address 195.45.121.2 255.255.255.224 interface FastEthernet0/1 description LAN_SIDE ip address 10.0.0.5 255.255.255.0 speed 100 full-duplex no mop enabled ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 195.45.73.21 ip route vrf Internet 0.0.0.0 0.0.0.0 195.45.73.21

    Read the article

  • Routing multiple static IPs from ISP at the cable modem?

    - by Jakobud
    I'm taking over IT responsibilities for a previous IT guy. We have a 50mb cable modem connection from Comcast along with 5 static IP addresses: XXX.XXX.XXX.180 XXX.XXX.XXX.181 XXX.XXX.XXX.182 XXX.XXX.XXX.183 XXX.XXX.XXX.184 We are in the process of replacing our firewall machine. Currently the firewall box is the only thing connected to the cable modem. However the cable modem has multiple ethernet ports on it, similarly to a router. I have assembled a new firewall machine and its time to start testing and configuring it. So that means that I also need it plugged into the cable modem (remember it has multiple ethernet ports on it). So now with multiple computer plugged into the cable modem, how does the cable modem know where to route the traffic? If some request on the internet is made to XXX.XXX.XXX.181, which goes to our cable modem, how does the cable modem know which connected computer that traffic is supposed to be sent? Looking at the web interface for the cable modem, there doesn't seem to be anything special setup on it with regards to routing or NATing IP addresses. Is that because when there is only one computer connected to the modem, all traffic is sent to it by default? Now that I am going to (temporarily) have multiple computers plugged into the cable modem, do I need to specify routing or NAT rules on the modem itself? I am going to speak to Comcast about this next, but I figured I'd ask here first just so I can get a better grasp on how this type of thing generally plays out.

    Read the article

  • Windows Server 2008 R2 SP1 Drivers Missing Would Not Install?

    - by bleepzter
    I am building my dev machine with WS2008R2SP1. I consider Windows Server as the best development environment for C# since I tend to focus on server-centric (integration) applications. The desktop flavor of Windows (7) doesn't play nicely with things like Commerce Server or BizTalk... so I to like stick to the environment I develop for. Previously I used to develop inside of VM's but I've found that it is super inefficient and tends to take a toll on the laptops. (I've gone through two of them in 6 months). Problem is that I multiple devices that do not want to be recognized by Windows: My machine is Dell Precision M4500: Intel Core i7-Q740, 1TB HDD, 8GB RAM, Dell re-branded Broadcom DW1501 802x11n Half-Mini Card, Dell re-branded Broadcom DW375 Bluetooh Module, Intel 82577LM Gigabit Network connection NVidia Quadro FX1800 Graphics The devices in question are the Dell rebranded broadcom network and bluetooth adapters: Broadcom USH: USB\VID_0A5C&PID_5800&REV_0101&MI_00 USB\VID_0A5C&PID_5800&MI_00 DW375 Bluetooth Module USB\VID_413C&PID_8187&REV_0517 USB\VID_413C&PID_8187 When I ran the broadcom installers I get "Operating System not supported" which I think is a big oversight on Broadcom's part. Why check for system version string? UGHGHGH Moreover if I try to manually force the driver in windows... I get an error: Driver Management concluded the process to install driver FileRepository\btwampsecfl.inf_amd64_neutral_d8fc2b85d035ed47\btwampsecfl.inf for Device Instance ID USB\VID_0A5C&PID_5800&MI_00\7&66DE6C9&0&0000 with the following status: 0xe0000217. '- or - Driver Management concluded the process to install driver FileRepository\btwampfl.inf_amd64_neutral_d4c4acf036c61299\btwampfl.inf for Device Instance ID USB\VID_413C&PID_8187\90004EEEF5A6 with the following status: 0xe0000217. I googled the 0xe0000217 error code and it says Bad service install section in the driver inf file... Any ideas on how to fix this? I also tried the post by BetaIQ on MSDN Forum, unfortunately the links to the driver package included in the post were dead :( PS. On a side note I also do mobile development for Android, iOS, and Windows Phone, and BB. Having the bluetooth is quite useful with mobile devices.

    Read the article

  • Multiple public IPs through DD-WRT without 1-to-1 NAT

    - by Stephen Touset
    I've done a search here and wasn't able to find anything relevant to my situation. I apologize in advance if I've missed an existing post on the topic. Our ISP has provided us with 6 static IP addresses. We are currently using two of them (plus one for the Comcast-provided router). One of the static addresses routes to our internal network, and the other goes to our VOIP phone system. Unfortunately, the Comcast machine doesn't support QoS, so our VOIP calls have been choppy. We plan to put the Comcast-provided router into bridge mode and replace it with an ASUS RT-N16 running DD-WRT. However, I'm unsure how to set up DD-WRT to function similarly to our existing Comcast router. The Comcast router's WAN IP is the first of our static IP addresses. We did not need to provide an internal LAN IP address — simply connecting machines that use our other public addresses to the LAN ports on the Comcast router is enough for it to route between the connected machines and our internet connection. Is there a way to do a similar setup through the DD-WRT? Thanks in advance.

    Read the article

  • Bind9 zone files

    - by user42780
    Well for the better part of the last two hours I've tried to figure out what is actually wrong, but I can't seem to find anything obvious to me. What I'm trying to do is setup my DNS for say(per example) domain.com. This should include two NS records, namely ns1.domain.com and ns2.domain.com. With that there should be a mail record, as well as a CNAME record for www. I've been trough roughly 20 how to's in the last two hours, rewrote everything from scratch four times and I still can't seem to find whats wrong. My only suspicion to this might be two things; the error I get from the bind9 daemon when I stop the service, and the named.conf file. The error I get from the bind9 daemon when stopping the service is: * Stopping domain name service... bind9 rndc: connection to remote host closed This may indicate that * the remote server is using an older version of the command protocol, * this host is not authorized to connect, * the clocks are not syncronized, or * the key is invalid. I honestly doesn't know what this means, apart from the key defined in /etc/bind/rndc.key that's not in the named.conf file(yes, I did try to add it to no avail). Here's all the zone files, and configuration files; http://208.77.101.5/bind9/ If anyone could help, it would be greatly appreciated.

    Read the article

  • Dynamically add Server 2008 NLB Nodes

    - by Nick Jacques
    Hi All, I have a small NLB cluster for Terminal Servers. One of the things we're looking at doing for this particular project (this is for a college class) is dynamically creating Terminal Servers. What we've done is create policies for a certain OU, that sets the proper TS Farm properties and installs the Terminal Server role and NLB feature. Now what we'd like to do is create a script to be run on our Domain Controller to add hosts to the preexisting NLB cluster. On our Server 2008 R2 Domain Controller, I was thinking of running the following PowerShell script I've kind of hacked together. Any thoughts on if this will work? Is there any way I can trigger this script to run on the DC once all the scripts to install roles are done on the various Terminal Servers? Thanks very much in advance!! Import-Module NetworkLoadBalancingClusters $TermServs = @() $Interface = "Local Area Connection" $ou = [ADSI]"LDAP://OU=Term Servs,DC=example,DC=com" foreach ($child in $ou.psbase.Children) { if ($child.ObjectCategory -like '*computer*') {$TermServs += $child.Name} } foreach ($TS in $TermServs) { Get-NlbCluster 172.16.0.254 | Add-NlbClusterNode -NewNodeName $TS -NewNodeInterface $Interface }

    Read the article

  • Using VLANs/subnetting to separate management from services?

    - by YouAreTheHat
    Background: I recently purchased a server and a managed switch for my home in the hopes of getting more experience and some fun toys to play with. The devices and appliances I either have or plan to have cover a broad spectrum: router, DD-WRT AP, Dell switch, OpenLDAP server, FreeRADIUS server, OpenVPN gateway, home PCs, gaming consoles, etc. I intend to segment my network with VLANs and associated subnets (e.g., VID10 is populated by devices on 192.168.10.0/24). The idea is to secure the more sensitive appliances by forcing traffic through my router/FW. Setup: After thinking and planning for some time, I have tentatively decided on 4 VLANs: one for the WAN connection, one for servers, one for home/personal devices, and one for management. In theory, the home VLAN will have limited access to the servers, and the management VLAN will be totally isolated for security. Question: Since I want to restrict access to management interfaces, but some appliances have to be accessible to other devices, is it possible/wise to have only management (SSH, HTTP, RDP) available on one VLAN/IP and only services (LDAP, DHCP, RADIUS, VPN) available on other? Is this a thing that is done? Does it gain me the security I think it does, or hurt me in some way?

    Read the article

  • remote telnet and email

    - by Mustafa Ismail Mustafa
    This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

    Read the article

  • How can I get MySQL 5.5 to log warnings to one of the log files?

    - by Wodin
    I have found various things that say that you can log warnings to the MySQL error log, but I have not been able to actually make it happen. I do have the error log working, and MySQL prints stuff to it on startup and shutdown and occasionally at other times, but if I e.g. SELECT CAST('123' AS DATE); and then SHOW WARNINGS; I can see the warning, but it does not show up in any logs. I've also tried enabling the general log and the slow query log, but these don't show the warnings either. I've tried with log_warnings = 1 and log_warnings = 2, but still no warnings are logged. What am I doing wrong? mysql> show variables like '%error%'; +--------------------+--------------------------+ | Variable_name | Value | +--------------------+--------------------------+ | error_count | 0 | | log_error | /var/log/mysql/mysql.err | | max_connect_errors | 10 | | max_error_count | 1024 | | slave_skip_errors | OFF | +--------------------+--------------------------+ mysql> show variables like '%warn%'; +---------------+-------+ | Variable_name | Value | +---------------+-------+ | log_warnings | 1 | | sql_warnings | OFF | | warning_count | 0 | +---------------+-------+ 3 rows in set (0.06 sec) mysql> show variables like '%log%'; +-----------------------------------------+-------------------------------+ | Variable_name | Value | +-----------------------------------------+-------------------------------+ ... | general_log | ON | | general_log_file | /var/log/mysql/general.log | ... | log | ON | ... | log_error | /var/log/mysql/mysql.err | | log_output | FILE | | log_queries_not_using_indexes | ON | ... | log_warnings | 1 | ... | slow_query_log | ON | | slow_query_log_file | /var/log/mysql/mysql-slow.log | ... +-----------------------------------------+-------------------------------+ Edit: mysql> show global status like 'Aborted%'; +------------------+-------+ | Variable_name | Value | +------------------+-------+ | Aborted_clients | 24 | | Aborted_connects | 15 | +------------------+-------+ 2 rows in set (0.08 sec) Edit: Clarification: I do get [Warning] Aborted connection 1 to db... and [Warning] Access denied for user... messages logged, but not the warnings that you can see via SHOW WARNINGS after e.g. inserting something or running LOAD DATA INFILE... which is what I'm looking for.

    Read the article

  • Internet Explorer / Windows 7 does not want to show HTML file from local network drive

    - by Jaanus
    Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

    Read the article

  • Persistent static route stops working after VPN drops and reconnects

    - by user76157
    I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can only do dial-out VPN. So I've got a Windows 2008 server on Network B acting as a VPN server (ServerB). Network A's router (RouterA) passes through Network B's router and connects via PPTP to ServerB. RouterA is assigned the static IP 192.168.0.40 on Network B. There's a persistent static route on ServerB telling it to use 0.40 for all requests to Network A's subnet, 192.168.1.0. (route -p add 192.168.1.0 mask 255.255.255.0 192.168.0.40). This enables ServerB to ping all machines on A (and those machines to ping ServerB). The VPN connection occasionally drops (I'm not sure why - it's set to remain always on and seems to drop randomly). This wouldn't be too much of a problem, as it reconnects automatically and quickly, except that when it does reconnect, the static route on ServerB no longer works. Route print (on ServerB) shows that the persistent static route still exists. However a tracert to a machine on Network A doesn't use the static route; it tries instead to use ServerB's default gateway (which is RouterB), and fails to find the machine. Deleting and re-adding the static route fixes the problem - a tracert uses the static route. At the moment, a batch file to delete and re-add the static route is scheduled to run every day. But this is clearly far from an ideal solution! I hope that's not too confusing. Any help would be very much appreciated.

    Read the article

  • Windows 7: Windows Firewall: Logging/Notifying on Outgoing Request Attempts

    - by Maxim Z.
    I'm trying to configure Windows Firewall with Advanced Security to log and tell me when programs are trying to make outbound requests. I previously tried installing ZoneAlarm, which worked wonders for me with this in XP, but now, I'm unable to install ZA on Win7. My question is, is it possible to somehow monitor a log or get notifications when a program tries to do that if I set all outbound connections to auto-block, so that I can then create a specific rule for the program and block it.? Thanks! UPDATE: I've enabled all the logging options available through the Properties windows of the Windows Firewall with Advanced Security Console, but I am only seeing logs in the %systemroot%\system32\LogFiles\Firewall\pfirewall.log file, not in the Event Viewer, as the first answer suggested. However, the logs that I can see only tell me the request's or response's destination IP and whether the connection was allowed or blocked, but it doesn't tell me what executable it comes from. I want to find out the file path of the executable that each blocked request comes from. So far, I haven't been able to.

    Read the article

  • Passing OpenVPN road-warrior traffic through tunnel pfsense

    - by Chris
    I have a local LAN (10.100.100.0/24) and OpenVPN road-warriors (10.99.99.0/24). pfSense is regulating all this as follows: LAN: 10.100.100.105 WAN: 10.100.99.1 (connected to DSL Router which connects to internet). OPT1: 10.99.99.0 (OpenVPN tun0). There is an IPSec connection between my office and another office where my LAN can work on a specific IP address (sql server to be exact) on 192.168.30.41. My problem is that I wish my OpenVPN road-warrior clients to be able to use the IPSec service on 192.168.30.41 as well (which at present they cannot despite the fact that I am pushing the route 192.168.30.0 255.255.255.0). The other site's administrator cannot add the extra route for my openvpn clients for a lot of reasons which I am not going to enter at this stage. Is there a possibility that I could NAT all of my openVPN road-warriors requests through a local LAN IP address (something like 10.100.100.250 which is not used by anything on my LAN). The problem is that I am a newbie with pfSense so as much step-by-step help as possible would be very much appreciated! Thank you. C.

    Read the article

  • external drive enclosure -> software RAID 5?

    - by memilanuk
    Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

    Read the article

< Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >