Search Results

Search found 21802 results on 873 pages for 'erx vb next coder'.

Page 673/873 | < Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >

• Windows Server 2008 IIS Random disconnect

  - by d123

  I am having a bit of a quirk with my IIS server. I'm running my IIS with 2 sets of IPs configured, one in the 192 range and the other in 172 range. I then have multiple apps which will talk to this server for information. Server has no AV or firewalls configured. I noticed that my apps when talking to the server on the 172 range, at random intervals, the server would just not respond. My apps would then disconnect and just try again, and every thing would be fine. This doesn't happen on the 192 range. So what I did is on a Linux box I did a watch command and to wget a file every half second on the 172 and 192 IPs. I noticed the same issue, every once in awhile wget on the 172 range would not get through, but there is no issues at all on 192. Thus I went around to Wireshark and did a dump. This is the last 3 packets, no other packets were received. 7010 100.871877 200.100.30.7 172.0.0.1 TCP 59619 http [ACK] Seq=140 Ack=85242 Win=64128 Len=0 TSV=1072818795 TSER=1660246133 7011 100.872238 200.100.30.7 172.0.0.1 TCP 59619 http [FIN, ACK] Seq=140 Ack=85242 Win=64128 Len=0 TSV=1072818796 TSER=1660246133 7013 100.873081 200.100.30.7 172.0.0.1 TCP 59619 http [ACK] Seq=141 Ack=85243 Win=64128 Len=0 TSV=1072818796 TSER=1660246133 So this is my issue, there is a random disconnect every once in awhile. The server doesn't receive the next SYN packet. HELP?

  Read the article

• When to raise domain functional level?

  - by Joel Coel

  We very recently completed a project to retire two old domain controllers running Server 2003 R2. They are now replaced with shiny new 2008 R2 boxes. However, the functional level of the domain has not yet been updated for the 2008 R2 servers, just in the long-shot case of the need for a rollback to the old controllers. I expect to have the all clear to update the domain by next weekend. I also want to note that our desktop clients are still 95% Windows XP. However, we're about to start a project to update our 200 or so clients to Windows 7 before the end of the calendar year. Is there any advantage to holding the domain at the 2003 functional level while we are still supporting more Windows XP than Windows 7, especially given that some of the management stations are still XP? Update: I forgot to mention earlier that we still have a pair of windows 2000 servers (not domain controllers) that support some legacy software. I'm working to replace those, but in the meantime I need to be sure that Windows 2000 can still participate in a 2008 R2 domain.

  Read the article

• Scaling a LAMP website hosted on EC2

  - by Gublooo

  Hello, I'm very new to all this - I've recently managed to launch my website on EC2. As next step, I want to learn how to scale the website. I have a general idea but wanted some input from the experts about how to go about it. My website is based on LAMP but also has Red5 server which allows users to record messages and also used for playing them back. Currently this is the architecture I'm planning to setup for initial scaling. Deploy four small EC2 instances for the following purposes: Instance-1: On this instance I will run the MySql database Instance-2: On this instance I will run the red5 server Instance-3 & Instance-4 These 2 instances will be used to deploy the website and will have Apache running on them. They will communicate with the mysql server on Instance-1 and red5 server on Instance-2 using the internal IP address. As an when required, I will launch another instance of the same EBS - I will have EBS of say 50 GIG where all the mysql data will be stored. Also red5 will use this EBS to store the video messages Load-Balancer - Use the load balancer provided by Amazon to load balance Instance-3 and Instance-4 This is what I have in mind. I could be way off so please bear with me. Also I have not taken into account the case of scaling MySql server as I currently have no idea about how that will be done and whether or not it is necessary initially. I am aware that Amazon provides auto scaling and mysql scaling as well but I dont want to get into that right now. Your feedback is appreciated Thanks

  Read the article

• Prevent 'Run-time error '7' out of memory' error in Excel when using macro

  - by MasterJedi

  I keep getting this error whenever I run a macro in my excel file. Is there any way I can prevent this? My code is below. Debugging highlights the following line as the issue: ActiveSheet.Shapes.SelectAll My macro: Private Sub Save() Dim sh As Worksheet ActiveWorkbook.Sheets("Report").Copy 'Create new workbook with Sheets("Report"(2)) as only sheet. Set sh = ActiveWorkbook.Sheets(1) 'Set the new sheet to a variable. New workbook is now active workbook. sh.Name = sh.Range("B9") & "_" & Format(Date, "mmyyyy") 'Rename the new sheet to B9 value + date. With sh.UsedRange.Cells .Value = .Value 'eliminate all formulas .Validation.Delete 'remove all validation .FormatConditions.Delete 'remove all conditional formatting ActiveSheet.Buttons.Delete ActiveSheet.Shapes.SelectAll Selection.Delete lrow = Range("I" & Rows.Count).End(xlUp).Row 'select rows from bottom up to last containing data in column I Rows(lrow + 1 & ":" & Rows.Count).Delete 'delete rows with no data in column I Application.ScreenUpdating = False .Range("A410:XFD1048576").Delete Shift:=xlUp 'delete all cells outwith report range Application.ScreenUpdating = True Dim counter Dim nameCount nameCount = ActiveWorkbook.Names.Count counter = nameCount Do While counter > 0 ActiveWorkbook.Names(counter).Delete counter = counter - 1 Loop 'remove named ranges from workbook End With ActiveWorkbook.SaveAs "\\Marko\Report\" & sh.Name & ".xlsx" 'Save new workbook using same name as new sheet. ActiveWorkbook.Close False 'Close the new workbook. MsgBox ("Export complete. Choose the next ADP in cell B9 and click 'Calculate'.") 'Display message box to inform user that report has been saved. End Sub Not sure how to make this more efficient or to prevent this error.

  Read the article

• How do i play nicely with MS SQL/SQL Server 2008

  - by acidzombie24

  Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

  Read the article

• Compare-Object gives false differences

  - by Andy

  I have some problem with Compare-Object. My task is to get difference between two directory snapshots made at different times. First snapshot is taken like this: ls -recurse d:\dir | export-clixml dir-20100129.xml Then, later, I get second snapshot and load both of them: $b = (import-clixml dir-20100130.xml) $a = (import-clixml dir-20100129.xml) Next, I'm trying to compare with Compare-Object, like that: diff $a $b What I get is in some places files that were added to $b since $a, but in some -- files that were in both snapshots, and some files, that were added to $b, are not given in Compare-Object output. Puzzling, but $b.count - $a.count is EXACTLY the same as (diff $a $b).count. Why is that? Ok, Compare-Object has -property param. I try to use that: diff -property fullname $a $b And I get the whole mess of differences: it shows me ALL the files. For example, say $a contains: A\1.txt A\2.txt A\3.txt And $b contains: X\2.mp3 X\3.mp3 X\4.mp3 A\1.txt A\2.txt A\3.txt diff output is something like that: X\2.mp3 => A\1.txt <= X\3.mp3 => A\2.txt <= X\4.mp3 => A\3.txt <= A\1.txt => A\2.txt => A\3.txt => Weird. I think I don't understand something crucial about Compare- Object usage, and manuals are scarce... Please, help me to get the DIFFERENCE between two directory snapshots. Thanks in advance UPDATE: I've saved data as plain strings like that: > import-clixml dir-20100129.xml | % { $_.fullname } | out-file -enc utf8 a.txt And results are the same. Here're excerpts of both snapshots (top 100-something lines, a.txt and b.txt), output of compare-object, and output of UNIX diff (unified). All files are UTF-8: http://dl.dropbox.com/u/2873752/compare-object-problem.zip

  Read the article

• INACCESSIBLE_BOOT_DEVICE after installing Linux on same drive

  - by kdgregory

  History: My PC was configured with two drives: an 80G on IDE 0 Primary that was running Win2K, and a 320G on IDE 0 Secondary that was running Linux (Ubuntu). I decided to pull the 80Gb drive out of the system, so dd'd the entire 80 G drive (/dev/sda) onto the 320 (/dev/sdb) -- this included the MBR and partition table. Then I pulled the drive, plugged the 320 into IDE 0 Primary, and rebooted. The Windows partition worked at this point. Then I installed Ubuntu into the remaining space on the 320. It works. However, when I try to boot into Windows, I get a BSOD with the following message: *** STOP: 0x0000007B (0x89055030,0xC000014F,0x00000000,0x00000000) INACCESSILE_BOOT_DEVICE Before the BSOD I see the Win2K splash screen, and it claims to be "starting windows" for a couple of seconds -- so it appears that the first stage boot loader is working as expected. Ditto when I try booting in Safe Mode. After reading the Microsoft KB article, I booted into the recovery console and tried running chkdsk /r. It refused to run, claiming that the drive was corrupted (sorry, didn't write down the exact error message). However, I can mount the drive from Linux, and access all files. And for what it's worth, I can scan the drive using the Linux "Disk Utility" (this is Ubuntu, the menus don't show real program names), it claims the drive to be clean. The KB article mentioned that boot.ini could be the problem, so here it is: timeout=10 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows 2000 Professional" /fastdetect Any pointers on what to do next?

  Read the article

• does leaving the laptop cord in break the cord?

  - by firedrake

  i recently got a new cord for my laptop because the cord i had before broke.im not sure how it got messed up, but one moment it charged my laptop and the next moment it didn't. i then got a new cord. the new cord worked perfectly fine until now, and it has only been a month. the cord wont work unless i am pressing it into the socket, which i am currently doing. the only thing i can find in common with the cords is that i leave them plugged in 24/7. my brother says that is the problem, but i do not think it is.any tips or hints? im going to use duct tape to keep the pressure on the cord till i can find a better solution(im also thinking it could be the hole i plug it into on the back of my computer, but im focusing on the other idea for now.if i wiggle the plug part in the socket of my computer it will stop charging unless im pressing it in or to the side) any help or ideas are appreciated. not sure if this will help but i use a gateway with windows vista. thanks

  Read the article

• Can SQL Server (2008) transaction logs handle the database being dropped and re-created?

  - by Ben

  We're trying to restore a database (created programatically by running a hand-crafted SQL script we have). Our backup routine is to create a full backup of every database on the SQL Server 2008 instance on a Saturday then automatic transaction logs (I assume these are created automatically anyway - we appear to have lots of log files, possibly one per transaction after the full backup was taken?). On Tuesday this week the database in question was dropped and another one with the exact same name and schema was created. SQL Server has continued to create transaction log files but it hasn't had chance to create a new full backup (that won't happen until next Saturday). Now as it turns out we need to restore the database to how it was on Thursday. This is after the "drop and re-create". My question is, is this possible? If it isn't, what exactly does SQL Server think that it's writing to those transaction logs created since the drop and re-create? (I understood they were kind of files containing a binary delta, which makes me think maybe we can restore from them?) I'm no DBA but then neither is our IT department, so I'm doing the best I can to resolve this. Any advice much appreciated!

  Read the article

• Server Intermittently Inaccessible Externally (but Accessible Internally Continuously)

  - by nicorellius

  I have a CRM on a server on a network. We have a static IP and another server outward facing. We use port-forwarding to map to the CRM, so that when you go to the IP or the FQDN, you get to the CRM: xxx.xxx.xxx.xxx crm.example.com Internally, we can access the CRM by going to crm or crm.example.com Lately, I've been noticing that accessing the server from outside the network times out or gives 503, bad gateway. During that time, I can also SSH (different port, so this works) into the outward facing computer and access the server just fine. I have a robot monitoring the site and indeed via HTTP monitoring the site is going down periodically. I looked through the Apache server access and error logs and nothing stuck out at me so I'm a bit confused as to what could be going on. I also searched the access logs for 503 and found nothing. When I run tracert from outside the network, it appears the packets basically make it through the wider area servers (Comcast city and county servers) and end up dropping at the CRM server's front step. I'm tempted to replace the server because it is older and underpowered but it would be nice to know what is going on. Any ideas what to do next?

  Read the article

• Cannot get at data in my NAS

  - by Ben

  I've got a bit of an issue that I'm hoping you can help me with. I have an Iomega ix4 as my NAS. This runs Linux and each drive in the box has 2 partitions: one for the OS and RAID info, and the second for the actual data. I had it configured as RAID5. Recently one of the drives failed. At this point all of the data was available, it was just reporting a failed drive. I had a drive of the same capacity (although not the exact same spec) which I swapped in place of the failed drive. It recognised it, and started to rebuild the data protection. So far so good ... or so I thought. The next day, after data protection had finished reconstructing, the NAS was telling me that 4 new drives had been added, and wanted confirmation to overwrite the data. Obviously I declined to do this. I swapped the failed drive back in again, in the hope that it would return to its previous state of the data being accessible, but one failed disk. However it didn't - it still tells me that the NAS has 4 new drives in it. I am hopeful that the actual data is untouched, so what I need to do is get it to rebuild the RAID without touching the data on the disks. I have ssh access, and have run stuff like mdadm --examine to see what I can find. The mdadm.conf file has no entry in the "definitions of existing MD arrays" section. I have not run any actual rebuilding commands as yet, because this is entering an area which I am out of my depth in. Please can someone advise the best way of getting my data? Thanks.

  Read the article

• Distributing Microsoft Office Template or Macro over the network

  - by zfranciscus

  We have around 400 users who use Word and we want to make their life easier by distributing templates and macros over the network. The easiest way to do this of course to setup a shared network folder and let them get the appropriate templates and macros. Of course, each user has to know where to copy these files to in their local PC, and we have to rely on constant email communication to let them know for newer version of the macro and templates. The next alternative is to ask them to configure Word to point to these network folder. But of course any disruption to the network means disruption to their work. We are thinking to setup a synchronization mechanism that downloads new templates to their local machine. We are also thinking to make this sync tool to prompt users that it will download new templates - you know just to give them visibility that they are receiving changes. We are wondering what is the best approach that people usually use in their workplaces ? Are there any specific tool that can make this task easier ?

  Read the article

• What should I encrypt in Debian during install?

  - by ianfuture

  I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . EDIT : 16/3/2010 After Richard Holloways reply I thought it relevant to add this info: The reasons why I want to do this are to explore maximising security on any server install and set up, due to interest in the area of Computer Security and Forensics. Also I am trying to peform the task as if it being performed in an enterprise situation. On a technical matter, once set up and configured with minimal packages and ssh this server will not physically be easy to access so I will only be entering via ssh. (Yes I know why encrypt something no one will ever be able to get their hands on? Because I can and I want to is the simple answer, but see above too).

  Read the article

• Separated virtual networks with same subnet range with 2 interface

  - by Coolpet

  I'm having some problems with routing with the following: I have a server with 2 interfaces. It has 1-1 alias contains the same subnet. the 2 interface is connected to 2 switch, which are separated from each other. Infrastructure: Eth0 192.168.16.2/20 Eth0:eth0 192.168.1.222/20 Eth1 192.168.32.3/20 Eth1:eth1 192.168.1.223/20 I have a PC which has the IP address: 192.168.1.3/24 The problem is the next: If PC is on subnet 1, I can ping it. If PC is on subnet 2, I can't ping it. traceroute shows the route is across 192.168.1.222 ping -I 192.168.1.223 192.168.1.3 is not working on subnet 2. arp entries show the MAC address belonging to the correct interface (eth1 on subnet 2) How can I force the server to look on both interface same ranged subnet for specific IP? It searches only in the first subnet. The routing table has these 2 entries: 192.168.0.0/20 dev eth0 proto kernel scope link src 192.168.1.222 192.168.0.0/20 dev eth1 proto kernel scope link src 192.168.1.223

  Read the article

• Outlook 2010 Crashing Unpredictably

  - by cbkadel

  Very often when I open up Outlook 2010 and start doing actions in it, it will hang and become non responsive. I have tried letting it finish, but it never does come back (up to 20 minutes of letting it try). I generally have to restart Outlook and try again. Usually after about an hour of doing this, Outlook somehow snaps out of it and works for the rest of the day. It's generally in the morning (though I doubt that's the key variable). Generally, the emails that cause problems are HTML/formatted, but not always. What I've done so far to troubleshoot: Install Latest Outlook Hotfix (I think Dec 14, 2010) Start Outlook in Safe Mode Neither of those steps seem to make a difference. Usually - after about 10-15 restarts of Outlook on any given day, then it starts working thereafter. My next step is to uninstall/reinstall Office 2010, but I'm hoping someone has seen this and knows what to do about it - though not sure. My configuration is like this: Microsoft Online Services (using Microsoft's Sign In App) - Connecting to Exchange I have two other Exchange accounts in this profile (new feature in 2010) connected through Outlook Anywhere. Life Meeting Conferencing Add In I've disabled the People tab/add in. I've disabled the "Send to Bluetooth" add-in. Not sure what else to do?

  Read the article

• How do I disable tablet gestures in windows 8?

  - by ???

  I'm using a Wacom Intuos4 and I have recently upgraded to Windows 8. I don't have a problem when using Photoshop however I occasionally draw on flash based online boards. The problem is, when I drag the pen in a direction repetitively (which is basically all I do when drawing) it's detected as a gesture, sometimes causing Chrome to go to the previous page (left drag) and making me lose the entire thing. Is there a way to disable these "gestures"? I believe this is not something caused by Windows 8 (or Charms) because I run Windows in English although it's not the initial language that Windows was installed in. I changed to English long after the installation. When Windows takes a move as a gesture, a small text pops up next to the cursor informing me about what I have just done and those pop ups are not even in English. I'm sorry for failing to be any more specific here but these gestures could be a feature of either Windows (unlikely), the tablet, Chrome or the computer itself. It's an Acer Aspire and it has one of those little stickers on it that specifies some of the features and one of them reads "Multi-Gesture" (referring to the touchpad, I guess). Could it be that this Multi-Gesture feature somehow decided to expand and apply for my tablet as well? If so, how do I disable it?

  Read the article

• How to recover Windows Password without reinstalling if you forgot Windows password?

  - by user38908

  Usually, we can recover Windows admin password in two traditional ways. The first is to change Windows password with another admin account; the second is to recover the previous password with the windows password reset disk that had been created before you forgot the password. Take Windows XP for example, 1 At the Windows XP login prompt when the password is entered incorrectly click the reset button in the login failed window. 2 Insert the password reset diskette into the computer and click Next. 3 If the correct diskette Windows XP will open a window prompting for the new password you wish to use. However, we offen ignore the important of security until we have been locked out of computer. Fortunately, there is still the last way that can unlock your computer without reinstalling - erase Windows password with Windows password reset CD, which can recover admin password for Windows 7/XP/Vista/NT/2000/2003.... Take Windows Password unlocker for example, followings are the steps to create the reset CD 1.Download Windows Password Unlocker from Password Unlocker Official site 2.Decompress the Windows password unlocker and note that there is an .ISO image file. Burn the image file onto an blank CD with the burner freely supported by Password Unlocker. 3.Insert the newly created CD into the locked computer and re-boot it from the CD drive. 4.After launched the CD, a window pop up with all your account names(if you have several accounts) select one of the accounts that you have forgotten its password to reset it. Just one press, this software can remove Windows password instantly.

  Read the article

• Exchange Full Access issue

  - by Benjamin Jones

  I was just hired as a System Admin for a small company. They use Exchange 2010 for their Mail Server. I've never had a permission issue like this with Exchange because I worked for a larger firm with less responsibility before. Their old system admin is LONG GONE, so I can't ask him what he did. The issue: Right now ANYONE can gain access to a mailbox and view the mail in the mailbox. This is disabled by default you say and you have to grant them full access ? You are right, but the old System Admin I guess didn't know what he was doing. SO right now user A can open up user B mailbox with out being granted permission. So here is what I found out. Every user in EMC Full Access Permission has Exchange Server group granted. Within the Exchange Server Group, Domain User's is a Member Of. Within Domain User's all user's are listed as Members. So my guess is because of this all users can access ANY mailbox? Well GOOD News. The company is small (35 people) and they are not computer savvy, so hopefully no one has figured out they can open anyone's mailbox.(From what I can tell no). Next thing I did was with my domain user in EMC, delete Exchange Servers Group in FUll Access Permissions and grant access to my user. I made sure that my memeber was apart of the Exchange Server Group. Went to our OWA site and now I don't have permission to my own mailbox. Re did everything to the way it was with my user and now I'm stuck. Any help? I would think granting a single user that is in the Exchange Server group, Full Access to that mailbox would enable them to open that mailbox???? I guess I am wrong.

  Read the article

• Modifying value of "Rating" column within Explorer for arbitrary file types

  - by Fake Name

  Basically, I have a large body of assorted media (text, images, flash files, archives, folders, etc...) and I'm attempting to organize it. Windows Explorer has a rating column, but there seems to be no way to modify the rating of the files short of opening them in their type-specific software (e.g. Media player, or Photo viewer). However, this does not work when the file is of an unsupported type (.rar, .swf ...), or a directory. I'd be more than willing to consider a file-manager replacement (I've alreadly looked at quite a few, Directory Opus, Total Commander, etc...), or even a solution that stores the rating metadata in a hidden file in each folder, or a separate database. The one real critical requirement is the ability to sort by rating, and being filetype-agnostic. Basically, is there any way to categorize a large collection of assorted files by rating that will work with any file type, including directories? - Ideally, there would be an easy way to add arbitrary columns to windows explorer, and edit them directly. However, there seems to be no way to do this. The rating column is the next best thing.

  Read the article

• Strange boot problems on 6 month old setup

  - by Balefire

  I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

  Read the article

• Recovery disk Windows 8 HP Pavilion g6

  - by fpghost

  I recently purchased a HP Pavilion g6 laptop running Windows 8. I want to either obtain the Windows 8 ISO or make some kind of recovery disk that would allow me to restore the system if things go wrong. The HP Pavilion comes with the 'HP Recovery Manager' which I thought may do the job, but on running it and putting in a DVD-R as requested it seems to just hang for a number of hours without doing a thing (the disk sounds like it's spinning for a few minutes but then goes silent). I then tried 'recdisc.exe' but I get the error System Repair could not be created The device reported unexpected or invalid data for a command. (0xC0AA02FF) Next I obtained my Windows 8 product key using the software ProduKey thinking this would allow me to go to the Microsoft website and download the Windows 8 ISO, but as far as I can tell all that is available is the upgrade which can be used if one is running something like Windows 7. Can anyone advise? EDIT: after a reboot recdisc.exe did work; I think the problem was due to some Windows updates needing a reboot, but never the less I would like a full Windows 8 ISO if possible.

  Read the article

• Need help ttoubleshooting PC

  - by brux

  I have had problems since my dog pee'd on my computer. Problem: loads windows fine, at random intervals from 5 minutes to 30 minutes it restarts itself. There is nothing in the event log such as errors, no BSOD, just cold restart. after rstarting - sometimes- it POST's and restarts itself at the end of POST. It will do this many times and then finally load windows. The cycle then begins again, it will restart eventually. What i have done: I thought it was HDD at first, since this is the only part of the coputer which actually got wet with any fluid ( the case is off the PC and the dog pee'd down the front where the HDD is located). Seatool, the seagate HDD tool, found errors when I ran it inside windows, so I ran it in DOS mode from bootable USB and ran it. It found the same number of errors and fixed them all. I ran the scan again and it says "Good". I loaded windows and ran the scan and it also said "Good there. So the HDD apears to be fine but the problem persists, random restarts. What else could this be? I have taken the computer apart and cleaned everything and also taken the PSU apart and cleaned it thoughrouly. The problem still persists, what should my next steps be? Thanks in advance.

  Read the article

• File corruption (bad checksums) in large files copied to VMware guest

  - by AllanA

  In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

  Read the article

• crontab not running on VirtualBox unless I'm logged in

  - by Mike

  I am running Ubuntu Server 9.04 in VirtualBox on my work PC as a development environment. I have some scripts that I've put in my user's crontab that run throughout the day while I'm SSHed into the VM. Last night, I closed PuTTy and all of my other running applications (except for VirtualBox and the VM) and went home. I came back this morning to discover that my cron jobs didn't run at all, yet when I SSHed into the VM, the next scheduled job ran. I set the schedule to 5min to test, disconnected again, and the jobs stopped running on schedule. They seem to only run if I'm logged in to the machine. Obviously, I want them to run on schedule even if I'm not logged in to the VM, otherwise there's no point. Is there something I've failed to configure correctly? New Information: There are now 3 entries in /var/log/cron.log saying the following "Mount of private directory return code [256]"... the entries correspond to when the cron job is supposed to run. I thought they are supposed to run as my userid? Why would my own userid be unable to run a script in my home directory?

  Read the article

• RDP suggesting a user name when connecting to a server

  - by Neolisk

  Prior to Event X, RDPing to Server 2003 always caused the user name appear blank and Login to be enabled, so you could pick to which domain you would log in. For us it's either local or our domain. Since a recent Event X a domain + user name is being suggested for every server and it's not the most recently used user name. If you remove it manually from RDP dialog, it's still being pre-populated for you, and then at the next available opportunity it returns into General/User name option of RDP dialog. So user name field comes pre-populated and you cannot change to log in locally (only if you manually erase domain specifier - everything before \) - Log in to option is disabled by default. We did not do any changes to our domain or client machines, so I am suspecting some Windows update caused it (and this being Event X). Interesting fact - it does not consistently happen on all machines, and some can login to some servers fine, while other servers keep suggesting a default user name. What could be that Event X and is there a way to fix it? EDIT: I tried this - How to clear remote desktop connections history and specifically this part of it: reg delete "HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\UsernameHint" /f The problem still persists.

  Read the article

< Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >