Search Results

Search found 29354 results on 1175 pages for 'scala 2 10'.

Page 675/1175 | < Previous Page | 671 672 673 674 675 676 677 678 679 680 681 682  | Next Page >

  • Utilize two gateways on the same network same interface with load balancing

    - by RushPL
    My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

    Read the article

  • port redirection on solaris 11

    - by mo3lyana
    I'm trying port forwarding on solaris 11. I have a mechine behind a server that use solaris 11. I try to access that mechine from the external port, and forwarded by solaris 11 mechine to that machine using the ip filter. I give ipnat.conf configuration like this: rdr net0 0.0.0.0/0 port 1428 -> 10.1.18.178 port 22 but the response appeared when I tried to remote is connection time out, but if I redirect to a solaris 11 machine itself, the configuration is running well. I've enabled IP forwarding on the system root@solaris11:/etc/ipf# ndd -get /dev/ip ip_forwarding 1 root@solaris11:/etc/ipf# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing enabled enabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled root@solaris11:/etc/ipf# ipadm show-prop PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE ipv4 forwarding rw on on off on,off is there any configuration that I missed?

    Read the article

  • lots of dns requests from China, should I worry?

    - by nn4l
    I have turned on dns query logs, and when running "tail -f /var/log/syslog" I see that I get hundreds of identical requests from a single ip address: Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#10856: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#44334: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#15268: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#59597: query: mydomain.de IN ANY + The frequency is about 5 - 10 requests per second, going on for about a minute. After that the same effect repeats from a different IP address. I have now logged about 10000 requests from about 25 ip addresses within just a couple of hours, all of them come from China according to "whois [ipaddr]". What is going on here? Is my name server under attack? Can I do something about this?

    Read the article

  • Mailer Daemon greeting failed

    - by Xelluloid
    I wrote a tool that sends automated mails to a couple of addresses. This worked for a couple of weeks. Now since yesterday I get Mailer-Daemon responses like this Hi. This is the qmail-send program at test.test2.net. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. testuser@domain.com: Connected to 123.456.789.10 but greeting failed. Remote host said: 554 foo.bar.com I'm not going to try again; this message has been in the queue too long. Does someone have an idea what I can do now?

    Read the article

  • Optimal Configuration for five 300 GB 15K SAS Drives

    - by Bob
    I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

    Read the article

  • Determine Server specs for a Rails with MySQL database (on AWS)

    - by Rogier
    I developed a intranet applications with Rails (3.2) for one of my customers. There will be around 30-40 employees working with it. Backend is MySQL (5). What would be the best way to determine the servers specs needed? Given: max. load will be roughly 2400 (40*60) HTTP requests (mixed GET / POST) per hour. 15% of these calls are JSON calls (iOS) avg request will make between 5-10 database calls 500-800 SQL INSERTS per day webpages are fairly simple (no images, just text) avg webpage is 15 request (css/js/etc) and total size is 35-45 KB More specific, since they need access from multiple geographical locations, we are thinking of running a bitnami Ruby stack in the AWS cloud (uptime is important). Any thoughts on a AWS Instance (small/medium) and Utilization (light/medium/heavy) ? Thanks!

    Read the article

  • Removing DS_Store files and variants?

    - by Ron Gejman
    I am running an Ubuntu 10.04.1 LTS server. Frequently I open up files using AFP from my Mac. Inevitably this created .DS_Store files on the server (although for some reason they are named :2eDS_Store. However, it also creates variants on DS_Store files. These variants are often named similarly to other files in that directory. E.g.: ~$ ls total 60K -rw-r--r-- 1 tarakhovsky 16K 2010-11-30 18:28 :2eDS_Store drwx--S--- 4 tarakhovsky 4.0K 2010-11-08 13:58 :2eTemporaryItems/ lrwxrwxrwx 1 tarakhovsky 15 2010-10-19 17:44 bigdisk -> /media/bigdisk// ... drwxr-xr-x 3 tarakhovsky 4.0K 2010-11-03 18:24 Temporary Items/ drwxr-xr-x 3 tarakhovsky 4.0K 2010-11-30 01:34 tmp/ ... I've disabled creation of DS_Store files using: defaults write com.apple.desktopservices DSDontWriteNetworkStores true so hopefully this won't continue to occur—but I really want to get rid of all of the existing variants of DS_Store files already on the server. Any ideas as to why these variants are being created and how I can get rid of them all?

    Read the article

  • Unable to boot Ubuntu 64-bit in Virtualbox on Mac OS X

    - by Aamir
    I have latest generation Macbook Pro 7.1 (Intel Core 2 Duo) running Mac OS X 10.6.6. I installed Virtuabox 4.0.2 and tried to boot Ubuntu 10.10 64-bit iso. The boot options screen from the live CD came up: However when I continued to load the live session, or installer for that matter, I encountered the following error: This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropriate for your CPU. I am not sure if VT-x is enabled or is supported in the Core 2 Duo of my Macbook Pro. But at least, I have both I/O APIC and VT-x enabled for hardware virtualization as told in the Virtualbox manual.

    Read the article

  • Can't access certain page in Mac OS X Lion

    - by huy.gamedev
    I can't access http://developers.facebook.com on OS X Lion 10.7.1 in any way. Safari: Safari can't open the page because the server unexpectedly dropped the connection Chrome: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset Firefox: The connection was reset. The connection to the server was reset while the page was loading. The problem might have been caused by DNS/cache and so on, so I tried the following but to no avail: Deleted cache/DNS Created a dummy user account on my Mac Reinstalled the OS (through the Internet and all my settings remain intact) Do you have any suggestions other than a fresh reinstallation of my Mac?

    Read the article

  • Windows 7 Green Load Bar Stuck and never finish loading,

    - by Levan
    Here is my issues, which i am currently having, in my windows 7, When i go to one specific folder, .Please take a look, This is not my file, but just to get an idea, there is 10 file max no more than 500 MB, i am not able to remove it, or cut it, or move it, it starts that green bar loading and never finish, The problem is, after getting into this folder, my SONY VAIO starts, overheating and if i did not restart, nothing can stop it to be cool down . I have reinstalled windows 2 weeks ago, i don't think this should be issue regarding it. Please, help me what the hell i should do with this GREEN BAR< to stop this headache,

    Read the article

  • Firefox completes the address bar with content absent from my history

    - by Antoine
    I have set Firefox to complete the address bar with elements from the history only ( other options are: nothing, bookmarks, and a history+bookmarks). However, Firefox still continues to complete the address bar with elements that are no longer in my history. A search in the history returns 0 result for the incriminated string. How can I solve this without loosing my entire history? I have already tried shift+delete on the elements I would like to delete, without success. How can I find the source of a certain completion ? (like an SQL request in the sqlite3 files used to store history) I'm using Firefox 16.0.2 on OS X 10.8.2.

    Read the article

  • DB auto failover in c# does not work when the principal server physically goes offline

    - by user62521
    I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

    Read the article

  • Multiple SSIDs better or worse

    - by swiss196
    I'm just setting up a network in a student house with 10 rooms, 3 floors. Configuration at the moment is as follows: Virgin Media 100mb Cable Virgin SuperHub on ground floor broadcasting on SSID1 Second AP(Edimax) wired on middle floor broadcasting on SSID2 These two networks server all 3 floors fairly well but I was wondering whether it would be better to setup an individual SSID for each floor (both the routers allow me to configure up to 3 ssids on each!). Would this help with speed issues, i.e if someone on the top floor is downloading/streaming etc, this wouldn't affect someone on the middle floor on a different SSID Or, will it have no effect? Thanks, Dave

    Read the article

  • Kill xserver from command line (init 3/5 does not work)

    - by John Smith
    Hi, I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

    Read the article

  • How to batch rename files copied from OSX to Windows with ':' in filenames?

    - by tputkonen
    This is really puzzling. I have lots of videos that were stored using Mac OS, and now I have to edit them on Windows XP. I copied files using HFSExplorer. Editing software refuses to open the files with their current names, and so far I have not found a way to batch rename all the files. Names of the files look like this: clip-2009-10-01 21;26;00.mov But I suspect in OSX the time was 21:26:00. I would like to replace the space with an underscore, and semicolons with dash. I've tried several bulk rename applications, with ; and :, but in vain. Also I've tried rename.pl, but also in vain.

    Read the article

  • How can I combine code from an old revision when I didn't branch in TortoiseMerge?

    - by gr33d
    I need to combine (merge?) some parts of an old revision with a newer revision of a file. I'm still pretty new to subversion, so I'm not sure what I'll bomb in the process. I did not branch--these are simply different revisions of a file. How do I send the sections of code from r1 to r3 where they are needed. The keyboard shortcuts and menu options for "theirs", "mine", "left block", "right block", etc aren't very intuitive. If I need 5 blocks from r1 to be after the first 10 blocks of r3, how do I do it? Shouldn't I be able to go through r1 block by block and decide if and where it belongs in r3? Thanks in advance!

    Read the article

  • Lost contact with my NAS after changing its IP

    - by Beles
    I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

    Read the article

  • I need to access another user's files.

    - by CDeanMartin
    My system is an HP netbook running Ubuntu 10 netbook edition from a USB drive. I created an admin account and user account, and left in place the 'ubuntu' account. My netbook came with Windows 7 factory loaded and I did some work in Windows before setting up Linux. I copied my work into the HP Tools FAT32 partition that also came Factory Loaded, and was only 20% full. Only the 'ubuntu' account shows the HP Tools partition. So I would like to either view the partition from the 'admin' or 'user' accounts, or copy files from the partition-to a folder accessible from admin or user. I have already tried right clicking the folder, selecting share, and installing the share package, but I got a string of errors and would prefer a short term, one time solution that does not involve installing the share package. All I need is a few plain text Windows files i was working on.

    Read the article

  • Mysql Master-ColdMaster

    - by enedebe
    I explain my case: I'm at Amazon AWS and I want to be fault tolerant on a entire region failure. My basic problem is to have the db in sync with 2 regions. My options: Master-Master (high lag) Hand made sync every 5 minutes Master-ColdMaster?! (copy on the fly but Master won't wait the other region commit) In my system we could afford loosing a piece of data (we're not a bank) the last inserts in the db, but we could not afford more than 10 minutes of downtime. The database is small and the level of inserts is low, and I wouldn't affect the normal usage waiting other region commit. Is the 3 solution posible? And the most important, once the primary fail how we can detect and change the rol between master-coldmaster -- coldmaster-master ? Is there any clean-mode to restore between failure? Thank's!

    Read the article

  • What settings to use for fastest reloading of a MySQL backup?

    - by Alex R
    I have a MySQL database which dumps to a 3.5 GB backup (mysqldump) in about 10 minutes. But reloading this backup on a standby / test server takes upwards of 12 hours. What are some settings that would maximize reloading performance? The most promising appear to be innodb_buffer_pool_size, innodb_additional_mem_pool_size, and innodb_log_buffer_size... but I'm reaching the limits of my trial-and-error approach. Which of these settings "should" be the most important? Through trial-and-error I was not able to get more than 70% CPU utilization and 63% memory utilization. I'd like both at 100% during a reload. All tables are InnoDB.

    Read the article

  • Compiz shutdown hook?

    - by ???
    I want to check 10+ local Git repositories if they have any unpushed commit, before shutdown. (I always forgot to push them, so later, the next morning I came office and back home again) I think maybe the shutdown process can check some conditions to meet, if any condition is not met, then give the user the choice to continue to shutdown or just cancel. Then, I can write something to hook the shutdown to check my Git repository to push. EDIT I have changed the title from Ubuntu shutdown hook to Compiz shutdown hook. I want to hook to the small lovely shutdown button, rather then click another ugly shortcut icon on the desktop.

    Read the article

  • Chain Gateways on the LAN

    - by Black2night
    I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have a QoS so what i want to do is the following :- let all the PCs get their IP from the Router and the default gateway will be m0n0wall the moon wall will have 2 interface (Lan 192.168.1.20) and (Wan 192.168.1.21 and default gateway 192.168.1.1) now when any PC want to access the internet it should go through m0n0wall and then m0n0wall will forward the connection to the default gateway through the wan interface which is the PPPoE running on the router (192.168.1.1) the big question is this scenario possible or not and what do you suggest? Thanks

    Read the article

  • Which Large File System Format to use for USB Flash drive compatible with Ubuntu/Mac/Windows?

    - by wajiw
    I've had this problem for a long time and can't find a solution. I switch between the 3 OSes all the time and use a 1TB USB Drive to do so. I can't seem to find a format that is compatible across all systems that handles large files (at least 8-9 GB). Does anyone have a solution for this? Recently I've tried exFat but that messes up the filesystem when trying to read on windows after adding files from Ubuntu (using the fuse driver). The OSes currently I'm using are Windows Vista/7, Mac OS X (10.6.5) and Ubuntu 10.10

    Read the article

  • Blocked connections passing through firewall. What is wrong?

    - by Kiranu
    In our company we have a small business router (Cisco RV082) on which we are using its standard configuration (block all incoming traffic). We also have an SMTP relay configured (using WS2008R2) so that our internal applications can send email through google apps (which requires authentication). The thing is that the server was being used to send spam. We fixed the problem by only allowing the server to relay email from our internal IP address range (10.0.0.0/16). My concern is that there was a way by which external IPs connected to the network and that underlying problem has not been fixed, but I cannot imagine how these machines connected. Any thoughts?

    Read the article

  • Chrome is "glitching", on my Mac, is this a known issue?

    - by Fraggle
    Ok, so on my MacBook Pro I'm seeing some weird stuff when using Chrome. Occasionally, the screen will momentarily get messed up (see pic). Usually this happens for less than 1 second but one time it froze like that long enough for me to get the screen shot shown. Only seems to happen when using Chrome (Version 35.0.1916.114). OSX 10.9.3 Happens on both primary monitor and when attached to secondary display Does not seem to happen to other windows being shown on same screen Is this a known issue? Possible causes?

    Read the article

< Previous Page | 671 672 673 674 675 676 677 678 679 680 681 682  | Next Page >