Search Results

Search found 22041 results on 882 pages for 'kill process'.

Page 677/882 | < Previous Page | 673 674 675 676 677 678 679 680 681 682 683 684  | Next Page >

• How to shrink Windows 7 boot partition with unmovable files.

  - by Alex Che

  I have just bought HP laptop with Windows 7 (64 bit). It has 500 GB HDD with three partitions: small hidden system partition, 12 GiB HP recovery partition, and 450 GiB C: boot partition. I would like to split this large C: partition into two partitions, leaving only 100 GiB for system, and giving the rest to new data partition. Although Windows built-in Disk Management utility has an option to shrink the bootable partition, it only allows me to shrink it roughly by half, even though only 20 GiB on the partition is used. As far as I understand, system unmovable files lie in the middle of the partition, preventing Disk Management utility to do what I want. And since new HP laptops don't come with OS installation disks (they only allow you to create recovery disks youself), I can't just repartition HDD and then reinstall OS. So, is there any way to shrink C: bootable partition and preserve Windows 7 working? P.S.: I have tried to use 3rd party GParted utility, and after shrinking the partition Windows 7 stopped booting with BSOD. System recovery didn't work, and I had to do factory recover. Since this is a long process, I would like to avoid doing it again :) So, please, suggest only proven solutions.

  Read the article

• Unable to install PHP-FPM on Apache (Failed to connect to FastCGI server)

  - by Nyxynyx

  I have been having problem installing php-fpm for use with apache2-mpm-worker. This is the guide that I am following. According to the guide's Step 5, Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization However I cannot find php5-fcgi at /usr/lib, but only /usr/bin/php5-cgi and /usr/bin/php-cgi, which I am not sure if they are the same. So I changed the lines in Step 5 to: Alias /php5-fcgi /usr/bin/php5-fcgi FastCgiExternalServer /usr/bin/php5-fcgi -host 127.0.0.1:9000 -pass-header On restarting Apache, it's logs gave the errors: [notice] caught SIGTERM, shutting down [alert] (4)Interrupted system call: FastCGI: read() from pipe failed (0) [alert] (4)Interrupted system call: FastCGI: the PM is shutting down, Apache seems to have disappeared - bye [notice] Apache/2.2.22 (Ubuntu) mod_fastcgi/mod_fastcgi-SNAP-0910052141 configured -- resuming normal operations [notice] FastCGI: process manager initialized (pid 16348) And on loading the index page [error] [client 10.0.2.2] (111)Connection refused: FastCGI: failed to connect to server "/usr/bin/php5-cgi": connect() failed [error] [client 10.0.2.2] FastCGI: incomplete headers (0 bytes) received from server "/usr/bin/php5-cgi" [error] [client 10.0.2.2] File does not exist: /var/www/mydomain/public/favicon.ico Question: Any idea why php5-fcgi is missing, and how should this problem be fixed? Thank you!! :)

  Read the article

• pGina with automatic Kerberos ticket and OpenAFS token/ticket

  - by rolands

  I am currently updating our educational Windows lab images from XP to 7, In doing so we are also migrating from Comtarsia to pGina. Unfortunately somewhere in the transition our automation that fetched kerberos and OpenAFS tickets/tokens on login has completely stopped functioning. Basically what used to happen was, using kfw-3.2.2 and the old OpenAFS release (loopback adapter days), either comtarsia would share password or something with the NIM (Network Identity Manager) which would authenticate against the kerberos server gaining a ticket and AFS token needed to access the users file, this was aided by the fact that our ldap database that windows authenticates against is also what kerberos uses to authenticate so usernames/passwords are the same across both services. I have set up all of the tools, albeit newer 64bit versions which seem to have given me less trouble than the previous releases of NIM/OpenAFS/Krb5, as well as setting their configurations back to what we used to use. Unfortunately this seems to be fubar'd in some way, instead all we get now is a OpenAFS token, most likely I assume from the AFScreds tool which operates some kind of integrated login process, although this does not help in getting a kerberos ticket or a afs ticket for which a login box is provided be NIM after the user logs in. Does anyone know IF it is possible to do what we are trying, and if so how? I was considering writing a pGina plugin which would interact with the server itself but this seems slightly like overkill considering that all these applications already exist...

  Read the article

• BAD ARCHIVE MIRROR using PXE BOOT method

  - by omkar

  i m trying to automatically install UBUNTU on a client PC by using the method of PXE BOOT method....my Objectives are below:- i m following the steps given in this link installation using PXE BOOT INSTALL 1:-the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. 2:-the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server i have installed DHCP3-server,Apache2 and TFTP for helping me with the installation. i have nearly achieved my first objective,i m able to boot my client using the files stored in the server,but during the installation stage it is asking me to "CHOOSE A MIRROR of UBUNTU ARCHIVE".i gave the server's IP address and the path in the server where the files are located but then too its giving me error "BAD ARCHIVE MIRROR". so is it possible that instead of downloading all the files from the internet and storing them on my disk , can i use the files which comes with the UBUNTU-CD, and how to store this files in what format (should i zip them ) on the disk. secondly i am also generating the ks.cfg which i wanted to give to the client for automatic installation of the OS ,so how should the configuration file be given to the installation process.

  Read the article

• Task Scheduler not able to execute .vbs scripts successfully

  - by Django Reinhardt

  Apologies if this has a really obvious answer! We have several daily tasks we run via a .vbs script on our server (through the Task Scheduler), and for months it has been fine, but recently we've hit a problem. The .vbs scripts stopped successfully executing (always timing out)... but could still be executed manually with no problems(!). Not knowing any good reason why the Task Scheduler should start having problems, we thought we'd try a little "creative thinking", and run the .vbs another way: Via a .bat file executed by the Task Scheduler. Again we hit weird issues, but with a little more debugging information, this time around. The .bat file run by Task Scheduler is nothing more than... CScript "C:\location\script.vbs" > Log.txt But after an attempt to run it, the Task Scheduler fails with the following error: 0x1: An incorrect function was called or an unknown function was called. The Log.txt (as output from the .bat file above) says: CScript Error: Initialization of the Windows Script Host failed. (Not enough storage is available to process this command. ) But get this: The .bat file executes perfectly (vbs script and all) if it's executed with a double click! There's only a problem when it's run by Task Scheduler. What the hell? We're running Windows Server 2008 R2 (x64) and yes, the Task Sheduler's results are the same whether the user is logged in or not. Also, the user that can run the scripts successfully manually, is also the same user that runs the scripts in Task Scheduler. Thanks for any help for this weird problem!

  Read the article

• Cannot run "Automation Anywhere" exe files from console (session 0) on Windows Server 2003 64 bit

  - by Tyler

  I have a simple exe created from an Automation Anywhere task that displays a message box saying hello world. I created this simple exe just for debugging the following issue. When I log in to the console (session 0), and run the Automation Anywhere created executable, it starts to run the task, it shows up in the applications and processes list in the task manager and it shows the two "loading..." windows briefly on the screen, just like normal. But after that, nothing happens... the "hello world" message does not show up. The exe is done and is removed from the application and process list in the task manager. The user I am logged in as, has admin rights and the machine uses "autologin" to automatically log in using this profile when it starts up. If I right click on the exe and "run as" another admin user, the exe runs properly, showing the "hello world" message. Also, if I log into the server in a new session, with the original user (the one that has the problems in session 0), and then run the exe, it runs properly and shows the "hello world". It works fine in any session other than the console session. There is something about the console session that is causing the exe not to run properly... even though it does appear to start running the exe. I should also mention that everything was working fine until Monday at midnight, after which none of the executables could be run successfully. Nothing was changed on the server and no updates were installed. I have since installed windows updates, but that didn't change anything. Looking for some advice on how to get these executables working in the console session again. Thanks!

  Read the article

• WS2008 subst in Logon script does not "stick"

  - by Frans

  I have a terminal server environment exclusively with Windows Server 2008. My problem is that I need to "map" a drive letter to each users Temp folder. This is due to a legacy app that requries a separate Temp folder for each user but which does not understand %temp%. So, just add "subst t: %temp%" to the logon script, right? The problem is that, even though the command runs, the subst doesn't "stick" and the user doesn't get a T: drive. Here is what I have tried; The simplest version: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") WinShell.Run "subst T: %temp%", 2, True That didn't work, so tried this for more debug information: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") Set procEnv = WinShell.Environment("Process") wscript.echo(procEnv("TEMP")) tempDir = procEnv("TEMP") WinShell.Run "subst T: " & tempDir, 3, True This shows me the correct temp path when the user logs in - but still no T: Drive. Decided to resort to brute force and put this in my login script: 'Mapping a temp drive Set WinShell = WScript.CreateObject("WScript.Shell") WinShell.Run "\\domain\sysvol\esl.hosted\scripts\tempdir.cmd", 3, True where \domain\sysvol\esl.hosted\scripts\tempdir.cmd has this content: echo on subst t: %temp% pause When I log in with the above then the command window opens up and I can see the subst command being executed correctly, with the correct path. But still no T: drive. I have tried running all of the above scripts outside of a login script and they always work perfectly - this problem only occurs when doing it from inside a login script. I found a passing reference on an MSFN forum about a similar problem when the user is already logged on to another machine - but I have this problem even without being logged on to another machine. Any suggestion on how to overcome this will be much appreciated.

  Read the article

• How to mount a LOFS in Solaris that doesn’t cross mountpoints

  - by jcea

  I need to access my "root" ZFS dataset to delete a file under "/var". But "/var" is overlayed by another ZFS dataset. Since these are system datasets I can't "umount" them while the machine is running. And I want to avoid to reboot the system in "failsafe" mode, since this is a production machine. Teorically ZFS would refuse to mount "/var" dataset over the underlying "/var", because it is not empty. But it works, possibly because they are system datasets mounted early in the boot process. But having the underlying "/var" not empty is preventing me to create an ABE (Alternate Boot Environment), so patching is risky, and I can't upgrade my system using Live Upgrade. The machine is remote. I have an IP KVM, but I rather prefer to avoid booting this machine in "failsafe" mode, if I can. I know there is a file in "/var/" because I can snapshot the "root" dataset and check it. But snapshots are read-only, so I can't get rid of the file. I tried "mkdir /tmp/zzz; mount -F lofs / /tmp/zzz", but when I go to "/tmp/zzz/var", I see the "/var" dataset, not the underlying "root" dataset. That is, the LOFS is crossing mountpoints. I would usually like it, but not this time!. Any suggestion, beside rebooting the machine in "failsafe" and mess with it thru the IP KVM?

  Read the article

• Yum Update Failing mod_ssl and glibc_devel

  - by Kerry

  Any ideas on how to get this to not fail? # yum update Freeing read locks for locker 0x82: 4189/140342084876032 Freeing read locks for locker 0x84: 4189/140342084876032 Freeing read locks for locker 0x85: 4189/140342084876032 Freeing read locks for locker 0x86: 4189/140342084876032 Freeing read locks for locker 0x87: 4189/140342084876032 Freeing read locks for locker 0x9a: 4189/140342084876032 Freeing read locks for locker 0x9c: 4189/140342084876032 Freeing read locks for locker 0x9d: 4189/140342084876032 Freeing read locks for locker 0x9e: 4189/140342084876032 Freeing read locks for locker 0x9f: 4189/140342084876032 Freeing read locks for locker 0xa0: 4189/140342084876032 Freeing read locks for locker 0xa1: 4189/140342084876032 Freeing read locks for locker 0xa2: 4189/140342084876032 Freeing read locks for locker 0xa3: 4189/140342084876032 Freeing read locks for locker 0xa4: 4189/140342084876032 Freeing read locks for locker 0xa5: 4189/140342084876032 Freeing read locks for locker 0xa6: 4189/140342084876032 Freeing read locks for locker 0xa7: 4189/140342084876032 Freeing read locks for locker 0xa8: 4189/140342084876032 Freeing read locks for locker 0xa9: 4189/140342084876032 Freeing read locks for locker 0xaa: 4189/140342084876032 Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.hmc.edu * epel: mirrors.kernel.org * extras: centos.mirror.freedomvoice.com * updates: mirrors.sonic.net Setting up Update Process Resolving Dependencies There are unfinished transactions remaining. You might consider running yum-complete-transaction first to finish them. The program yum-complete-transaction is found in the yum-utils package. --> Running transaction check ---> Package device-mapper-persistent-data.x86_64 0:0.2.8-2.el6 will be updated ---> Package device-mapper-persistent-data.x86_64 0:0.2.8-4.el6_5 will be an update ---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated --> Processing Dependency: glibc-headers = 2.12-1.132.el6 for package: glibc-devel-2.12-1.132.el6.x86_64 ---> Package glibc-headers.x86_64 0:2.12-1.132.el6_5.2 will be an update ---> Package httpd.x86_64 0:2.2.15-29.el6.centos will be updated --> Processing Dependency: httpd = 2.2.15-29.el6.centos for package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 ---> Package httpd.x86_64 0:2.2.15-30.el6.centos will be an update ---> Package kernel.x86_64 0:2.6.32-431.17.1.el6 will be installed ---> Package kernel-devel.x86_64 0:2.6.32-431.17.1.el6 will be installed ---> Package selinux-policy-targeted.noarch 0:3.7.19-231.el6_5.1 will be updated ---> Package selinux-policy-targeted.noarch 0:3.7.19-231.el6_5.3 will be an update --> Finished Dependency Resolution Error: Package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 (@base) Requires: httpd = 2.2.15-29.el6.centos Removing: httpd-2.2.15-29.el6.centos.x86_64 (@base) httpd = 2.2.15-29.el6.centos Updated By: httpd-2.2.15-30.el6.centos.x86_64 (updates) httpd = 2.2.15-30.el6.centos Error: Package: glibc-devel-2.12-1.132.el6.x86_64 (@base) Requires: glibc-headers = 2.12-1.132.el6 Removing: glibc-headers-2.12-1.132.el6.x86_64 (@base) glibc-headers = 2.12-1.132.el6 Updated By: glibc-headers-2.12-1.132.el6_5.2.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.2 Available: glibc-headers-2.12-1.132.el6_5.1.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.1 You could try using --skip-broken to work around the problem ** Found 34 pre-existing rpmdb problem(s), 'yum check' output follows: audit-2.2-4.el6_5.x86_64 is a duplicate with audit-2.2-2.el6.x86_64 audit-libs-2.2-4.el6_5.x86_64 is a duplicate with audit-libs-2.2-2.el6.x86_64 curl-7.19.7-37.el6_5.3.x86_64 is a duplicate with curl-7.19.7-37.el6_4.x86_64 device-mapper-multipath-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-0.4.9-72.el6_5.1.x86_64 device-mapper-multipath-libs-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-libs-0.4.9-72.el6_5.1.x86_64 2:ethtool-3.5-1.4.el6_5.x86_64 is a duplicate with 2:ethtool-3.5-1.2.el6_5.x86_64 glibc-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-2.12-1.132.el6.x86_64 glibc-common-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-devel-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 has missing requires of glibc-headers = ('0', '2.12', '1.132.el6_5.2') gnutls-2.8.5-14.el6_5.x86_64 is a duplicate with gnutls-2.8.5-13.el6_5.x86_64 httpd-2.2.15-29.el6.centos.x86_64 has missing requires of httpd-tools = ('0', '2.2.15', '29.el6.centos') httpd-manual-2.2.15-30.el6.centos.noarch has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') iproute-2.6.32-32.el6_5.x86_64 is a duplicate with iproute-2.6.32-31.el6.x86_64 kernel-firmware-2.6.32-431.17.1.el6.noarch is a duplicate with kernel-firmware-2.6.32-431.11.2.el6.noarch kernel-headers-2.6.32-431.17.1.el6.x86_64 is a duplicate with kernel-headers-2.6.32-431.11.2.el6.x86_64 kpartx-0.4.9-72.el6_5.2.x86_64 is a duplicate with kpartx-0.4.9-72.el6_5.1.x86_64 krb5-libs-1.10.3-15.el6_5.1.x86_64 is a duplicate with krb5-libs-1.10.3-10.el6_4.6.x86_64 libblkid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libblkid-2.17.2-12.14.el6.x86_64 libcurl-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-7.19.7-37.el6_4.x86_64 libcurl-devel-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-devel-7.19.7-37.el6_4.x86_64 libtasn1-2.3-6.el6_5.x86_64 is a duplicate with libtasn1-2.3-3.el6_2.1.x86_64 libuuid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libuuid-2.17.2-12.14.el6.x86_64 libxml2-2.7.6-14.el6_5.1.x86_64 is a duplicate with libxml2-2.7.6-14.el6.x86_64 mdadm-3.2.6-7.el6_5.2.x86_64 is a duplicate with mdadm-3.2.6-7.el6.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 is a duplicate with 1:mod_ssl-2.2.15-29.el6.centos.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') nss-softokn-3.14.3-10.el6_5.x86_64 is a duplicate with nss-softokn-3.14.3-9.el6.x86_64 openssl-1.0.1e-16.el6_5.7.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.4.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.7.x86_64 openssl-devel-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-devel-1.0.1e-16.el6_5.7.x86_64 selinux-policy-3.7.19-231.el6_5.3.noarch is a duplicate with selinux-policy-3.7.19-231.el6_5.1.noarch tzdata-2014d-1.el6.noarch is a duplicate with tzdata-2014b-1.el6.noarch util-linux-ng-2.17.2-12.14.el6_5.x86_64 is a duplicate with util-linux-ng-2.17.2-12.14.el6.x86_64 UPDATE I installed and ran yum-complete-transaction as requested, it finished some things and suggested I run package-cleanup --problems, which yielded this: package-cleanup --problems Loaded plugins: fastestmirror Package httpd-manual-2.2.15-30.el6.centos.noarch requires httpd = ('0', '2.2.15', '30.el6.centos') Package httpd-2.2.15-29.el6.centos.x86_64 requires httpd-tools = ('0', '2.2.15', '29.el6.centos') Package mod_ssl-2.2.15-30.el6.centos.x86_64 requires httpd = ('0', '2.2.15', '30.el6.centos') Package glibc-devel-2.12-1.132.el6_5.2.x86_64 requires glibc-headers = ('0', '2.12', '1.132.el6_5.2') I'm definitely not a sys-admin, what would be the next step? UPDATE 2 I ran yum distro-sync: # yum distro-sync Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.hmc.edu * epel: mirrors.kernel.org * extras: centos.mirror.freedomvoice.com * updates: mirrors.sonic.net Setting up Distribution Synchronization Process Resolving Dependencies --> Running transaction check ---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated --> Processing Dependency: glibc-headers = 2.12-1.132.el6 for package: glibc-devel-2.12-1.132.el6.x86_64 ---> Package glibc-headers.x86_64 0:2.12-1.132.el6_5.2 will be an update ---> Package httpd.x86_64 0:2.2.15-29.el6.centos will be updated --> Processing Dependency: httpd = 2.2.15-29.el6.centos for package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 ---> Package httpd.x86_64 0:2.2.15-30.el6.centos will be an update --> Finished Dependency Resolution Error: Package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 (@base) Requires: httpd = 2.2.15-29.el6.centos Removing: httpd-2.2.15-29.el6.centos.x86_64 (@base) httpd = 2.2.15-29.el6.centos Updated By: httpd-2.2.15-30.el6.centos.x86_64 (updates) httpd = 2.2.15-30.el6.centos Error: Package: glibc-devel-2.12-1.132.el6.x86_64 (@base) Requires: glibc-headers = 2.12-1.132.el6 Removing: glibc-headers-2.12-1.132.el6.x86_64 (@base) glibc-headers = 2.12-1.132.el6 Updated By: glibc-headers-2.12-1.132.el6_5.2.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.2 Available: glibc-headers-2.12-1.132.el6_5.1.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.1 You could try using --skip-broken to work around the problem ** Found 34 pre-existing rpmdb problem(s), 'yum check' output follows: audit-2.2-4.el6_5.x86_64 is a duplicate with audit-2.2-2.el6.x86_64 audit-libs-2.2-4.el6_5.x86_64 is a duplicate with audit-libs-2.2-2.el6.x86_64 curl-7.19.7-37.el6_5.3.x86_64 is a duplicate with curl-7.19.7-37.el6_4.x86_64 device-mapper-multipath-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-0.4.9-72.el6_5.1.x86_64 device-mapper-multipath-libs-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-libs-0.4.9-72.el6_5.1.x86_64 2:ethtool-3.5-1.4.el6_5.x86_64 is a duplicate with 2:ethtool-3.5-1.2.el6_5.x86_64 glibc-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-2.12-1.132.el6.x86_64 glibc-common-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-devel-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 has missing requires of glibc-headers = ('0', '2.12', '1.132.el6_5.2') gnutls-2.8.5-14.el6_5.x86_64 is a duplicate with gnutls-2.8.5-13.el6_5.x86_64 httpd-2.2.15-29.el6.centos.x86_64 has missing requires of httpd-tools = ('0', '2.2.15', '29.el6.centos') httpd-manual-2.2.15-30.el6.centos.noarch has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') iproute-2.6.32-32.el6_5.x86_64 is a duplicate with iproute-2.6.32-31.el6.x86_64 kernel-firmware-2.6.32-431.17.1.el6.noarch is a duplicate with kernel-firmware-2.6.32-431.11.2.el6.noarch kernel-headers-2.6.32-431.17.1.el6.x86_64 is a duplicate with kernel-headers-2.6.32-431.11.2.el6.x86_64 kpartx-0.4.9-72.el6_5.2.x86_64 is a duplicate with kpartx-0.4.9-72.el6_5.1.x86_64 krb5-libs-1.10.3-15.el6_5.1.x86_64 is a duplicate with krb5-libs-1.10.3-10.el6_4.6.x86_64 libblkid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libblkid-2.17.2-12.14.el6.x86_64 libcurl-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-7.19.7-37.el6_4.x86_64 libcurl-devel-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-devel-7.19.7-37.el6_4.x86_64 libtasn1-2.3-6.el6_5.x86_64 is a duplicate with libtasn1-2.3-3.el6_2.1.x86_64 libuuid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libuuid-2.17.2-12.14.el6.x86_64 libxml2-2.7.6-14.el6_5.1.x86_64 is a duplicate with libxml2-2.7.6-14.el6.x86_64 mdadm-3.2.6-7.el6_5.2.x86_64 is a duplicate with mdadm-3.2.6-7.el6.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 is a duplicate with 1:mod_ssl-2.2.15-29.el6.centos.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') nss-softokn-3.14.3-10.el6_5.x86_64 is a duplicate with nss-softokn-3.14.3-9.el6.x86_64 openssl-1.0.1e-16.el6_5.7.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.4.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.7.x86_64 openssl-devel-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-devel-1.0.1e-16.el6_5.7.x86_64 selinux-policy-3.7.19-231.el6_5.3.noarch is a duplicate with selinux-policy-3.7.19-231.el6_5.1.noarch tzdata-2014d-1.el6.noarch is a duplicate with tzdata-2014b-1.el6.noarch util-linux-ng-2.17.2-12.14.el6_5.x86_64 is a duplicate with util-linux-ng-2.17.2-12.14.el6.x86_64

  Read the article

• The boot selection failed because a required device is inaccessible 0xc000000e

  - by bbodenmiller

  A family member of mine recently went on vacation and turned off their computer, something they normally do not do, upon returning home it would not turn on and now returns the error message below. Generally friends and family come to me for help with computers and I have no problem, however this time I am a bit stumped. Any suggestions would be greatly appreciated. As you can see the error message is: Status: 0xc000000e Info: The best selection failed because a required device is inaccessible. Before going to this error message it briefly flashes the Windows loading screen. I have been able to confirm through the Windows RE Command Line and the dir command that the C: drive is accessible and likely is just suffering a bootup issue. I have tried: Launching the repair process discussed in the error message three times however each time it requires a restart and then returns to the same error message. Changing the boot order to be hard drive first Getting into safe mode; F8 just results in the same error message before I can get to the menu to select safe mode I have checked to make sure the BCD (bcdedit, Boot Configuration Data) is still intact as per https://www.symantec.com/business/support/index?page=content&id=TECH160475 I plan to try (but would like additional comments on): sfc /scannow; requires a restart and thus will likely result in the error message again A memory scan Bootrec as per http://support.microsoft.com/kb/927392#method1 Swapping IDE cables/ports Resetting the BIOS I noticed others with similar issues around the web are dual-booting however this machine is not setup in a dual-boot environment. Additionally at one point this error message supposedly showed up before I started working on the computer: The instruction at 0xfbe2584d referenced memory at 0x00000008. The memory could not be read. As previously stated any additional suggestions or words of advice would be greatly apprecaited.

  Read the article

• Gnome-Applets Package Causing Gnome to Segfault

  - by FranticPedantic

  When I boot ubuntu I get a bunch of windows saying "The panel encountered a problem while loading: OAFIID:GNOME_ShowDesktopApplet", with a bunch of others(5) besides ShowDesktopApplet. I am able to launch a terminal, and I do have the taskbar at the top, although the bar at the bottom that holds the windows is blank, so when I minimize a window it disappears. Furthermore, when I try to launch most applications (firefox for example) it segfaults. I have googled the error but it seems to be common but general issue, and a lot of the solutions that worked for others didn't work for me. I tried deleting the gconf, gnome, and gnome2 folders in my home directory. I tried deleting a bunch of the gnome folders (although I might have done this wrong, I was confused as to which ones). I have also tried to use apt-get and dpkg to re-install ubuntu-desktop and gnome-applets. However, when I try apt-get install ubuntu-desktop I get errors regarding /var/cache/apt/archives/gnome-applets_2.28.0-0ubunt2_amd64.deb I tried dpkg --configure -a and interestingly I get Package gnome-applets is not installed. When I try to use apt-get to install it, that same pesky problem pops up error processing /var/cache/apt/archives/gnome-applets_2.28.0-0ubunt2_amd64.deb (--unpack) subprocess new post-removal script returned error exist status 245 sub process /usr/bin/dpkg returned an error code(1) This file has been popping up with regards to a lot of the solutions suggested I see. Any ideas?

  Read the article

• SQL Server 2005 Merge Replication to SQL Server CE 3.5

  - by user33067

  Hi, In my organization, we have a SQL Server 2005 database server (DBServer). Users of an application will normally be connected to DBServer, but, occasionally, would like to disconnect and continue their work on a laptop using SQL Server Compact Edition 3.5 (SQLCE). Due to this, we have been looking into using Merge Replication between the DBServer and SQLCE. From what I have read about this process, IIS must be installed on "the server"... yet, I have found no indication to whether this is talking about DBServer or SQLCE. I had assumed the documentation was referring to DBServer and proposed this to our networking staff. That idea was quickly put to rest as it is not our policy to install IIS on an internal server. This is where our SQL Server 2005 web server (WebServer) entered the picture. The idea being that IIS would be installed on WebServer and would be the conduit for DBServer and SQLCE to communicate. This sounded like a good idea at first, until I started looking for documentation on this type of setup. Everything I have been able deals with a DBServer -- SQLCE -- DBServer setup... nothing on DBServer -- WebServer -- SQLCE -- WebServer -- DBServer. Questions: Is going with a 3 server setup ideal? Does anyone have documentation on this type of setup? Does IIS even need to be running on one of the big servers, or can it just run off the laptop with SQLCE on it? (I'd really like this option ;))

  Read the article

• Difficulty restoring a differential backup in SQL Server, 2 media families are expected or no files

  - by digiguru

  I have sql backups copied from server A to server B on a nightly basis. We want to move the sql server from server A to server B without much downtime, but the files are very large. I assumed that performing a differential backup and restore would solve the problem with the databases. Copy full backup from server A to copy to server B (10+gb) Open SQL Server Managment Studio on server B Right mouse on databases Restore Database Type in the new DB-name Choose "From Device" and browse to the backup file Click Okay. This is now resorting the original "full" backup. Test new db with dev application - everything works :) On original database rightmouse on DB Tasks Backup... Backup Type = Differential, Backup to disk, add a new file, and remove the old one (it needs to be a small file to transfer for the smallest amount of outage) Copy the diff backup onto the new db Right mouse on DB Tasks Restore Database This is where I get stuck. If I add both the new differential file, and the original backup to the restore process I get an error The media loaded on "M:\path\to\backup\full.bak" is formatted to support 1 media families, but 2 media families are expected according to the backup device specification. RESTORE HEADERONLY is terminating abnormally. But if I try to restore using just the differential file I get System.Data.SqlClient.SqlError: The log or differential backup cannot be restored because no files are ready to rollforward. (Microsoft.SqlServer.Smo) Any idea how to do it? Is there a better way of restoring backups with limited downtime?

  Read the article

• Group policy waited for the network subsystem

  - by the-wabbit

  In an AD domain with Windows Server 2008 R2 DCs users are complaining about delays in the bootup process of the clients. The group policy log reveals that the client is waiting ~ 20-50 seconds for "the network subsystem": Event 5322, GroupPolicy Group policy waited for 29687 milliseconds for the network subsystem at computer boot. This appears to be domain-specific as machines joining a different domain from the same network do not experience any delays and Event 5322 reports <1000 ms wait times at startup. It happens on virtual and physical machines alike, so it does not look like a hardware- or driver-related issue. Further investigation has shown that the client is taking its time before issuing DHCP requests. In the network traces, I can see IPv6 router solicitations and multicast DNS name registrations as soon as the network driver is loaded and the network connection is reported "up" in the event log (e1cexpress/36). Yet, the DHCPv4 client service seems to take another 15-50 seconds to start (Dhcp-Client/50036), so the IPv4 address remains unconfigured for a while. The DHCP client's messages in the event log are succeeding the service start of the "Sophos Anti-Virus" service (Sophos AV 10.3 package), which I suspect to be the culprit - the DHCP client service dependencies include the TDI Support driver which might be what Sophos is using to intercept network traffic: Network Location Awareness seems to break at startup as a side-effect, I see that off-site DCs are contacted due to what seems like a race condition between the GP client and the DHCP client / NLA service startup. I could set the Group Policy Client service to depend on NLA, yet this still would not eliminate the delay. Also, I am not all that sure that this is a good idea. Is there a known resolution which would eliminate the startup delay?

  Read the article

• Launching firefox on remote server causes local firefox to start instead

  - by terdon

  Right, this is strange. I am connecting from my laptop (LMDE) to a remote host (SUSE linux enterprise) using ssh -X. I want to launch a firefox instance running on the remote server so I can have access to webpages on a private network. User@RemoteMachine $ which -a firefox /usr/bin/firefox User@RemoteMachine $ /usr/bin/firefox --version Mozilla Firefox 2.0.0.2, Copyright (c) 1998 - 2007 mozilla.org User@LocalMachine $ which -a firefox /usr/bin/firefox User@LocalMachine $ /usr/bin/firefox --version Mozilla Firefox 14.0.1 Now, if firefox is not running on the local machine, everything goes as expected and executing firefox on the remote machine causes a firefox (v 2.0) window running on the remote machine to show up. However, if firefox is running on the local machine a second window of firefox 14.0.1 running on the local machine appears. I have checked top in both machines. In the 2nd case, a firefox process briefely appears on the remote machine and then disappears when the local version of firefox is launched. My questions are the following: What gives? How/why can firefox connect to its existing instance on the local machine? The remote machine appears to have access to the local machine. It, in fact, appears to have the right to execute programs on my local machine. Am I missing something or is this just weird? Is this not a security risk?

  Read the article

• ssh tunnel - bind: Cannot assign requested address

  - by JosephK

  Trying to create a socks (-D) ssh tunnel - Linux box to Linux box (both centos): sshd running on remote side ok. From local machine we do / see this: ssh -D 1080 [email protected]. [email protected]'s password: bind: Cannot assign requested address (where 8.8.8.8 is really my server's IP and 'user' is my real username) I am logged into the remote side in this terminal-window. I can verify that the local port was unused prior to this command, and then used by an ssh process, after the command, via: netstat -lnp | grep 1080 So, unlike most googled-responses with this error, the problem would not seem to be the loopback interface assignment. If I try to use this tunnel with a mail client, the local-side permits the attempt (no 'proxy-failed' error), but no data / reply is returned. On the remote side, I do have "PermitTunnel yes" in my sshd_config (though 'yes' should be the default, anyway). Ideas or Clues? Here is the relevant debug-output OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * .... debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:1080 forwarded to remote address socks:0 debug1: Local forwarding listening on 127.0.0.1 port 1080. debug1: channel 0: new [port listener] debug1: Local forwarding listening on ::1 port 1080. bind: Cannot assign requested address debug1: channel 1: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.utf8 Other clue: If I run a Virtual Box on the client running Windows, open a tunnel with putty in that box, that tunnel, to the same remote server, works.

  Read the article

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windoze at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• Toshiba Portege M400 screen rotation not working under Windows 7 x64

  - by Christi

  I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

  Read the article

• Weird "missing" CD/DVD driver during Windows Server 2008 installation

  - by Django Reinhardt

  Hi. We have an old PowerEdge 860 that we're trying to install Windows Server 2008 R2 onto. At present the machine doesn't have any OS installed, so we're doing a clean install from a DVD. Pretty simple stuff. The problem is that, although the installation process starts off well (asking for language and locale settings), as soon as we click "Install Now" we're told "A required CD/DVD device driver is missing." The operating system has already booted from our only DVD drive(!). I've seen other people complain about this problem (usually in relation to installing Vista or Windows 7) but I've not found a 100% solution yet. (Our DVD drive is a Hitachi LG GWA-4400N, salvaged from an old laptop. There have never been any drivers released for this device, nor any firmware updates.) The most promising lead I have is from someone claiming that Windows is actually asking for a driver for the ATAPI/IDE Controller here. UPDATE See my answer below... It was most likely a corrupt download. (*shame*) I will update this question when I know for sure.

  Read the article

• Setting up SQL Server 2005 to use all available memory in 32bit Windows Server 2003 - and verifying

  - by Rizwan Kassim

  There are a number of questions along this line - but they either sometimes contradict each other, or don't show how to properly verify that everything is actually working - hopefully this can be comprehensive... I'm running SQL Server 2005 SP3 Standard on Windows Server 2003 R2 Standard. My server has 8GB of memory installed - my system is almost entirely used as a Database Server - there are some services running on them, but the OS + services can run within 1Gb of RAM. What I've done (please tell me if I'm doing something wrong): /3GB in the boot.ini. (To increase the amount of user-space memory available - info) /PAE in the boot.ini. (Windows claimed to be doing PAE even without this switch, somethow.) Enabled AWE in SQL Server. Enabled Lock Pages in Memory Option for users SYSTEM and Local Service. (info). SQL Server Standard doesn't seem to use this until Cumulative Update 4, which isn't installed on my server. (info) Set Min/Max Memory to : 1024Mb/5112Mb After doing all the above, we definately saw a level of improvement - but I'd like now to verify my settings, make sure that I'm making full use of the memory available. (There appeared to be a slowdown when max = 7Gb, so I edged off from that value, but it might have been just perceptual.) To verify, I checked the following levels in PerfMon : Process(sqlserv):Working Set : 76386304 SQL Server(Memory Manager) : Total Server Memory : 3538944 (I saw a doc that noted that this wasn't the full memory used by SQL Server, so I'm not sure whether to trust it) So -- my questions... Should my max be around 7Gb? If not, what should it be? Why is total server memory at 3.5G, when it's been allocated 5G? What is the proper metric for the amount of memory allocated to SQL Server? The Working Set seems a bit large... Am I possibly missing any steps in the setup? Any recommended resources on starting to tune the caching system now? Thanks

  Read the article

• Powerpoint 2010 crash on quickstyle menu

  - by Marcus Lindblom

  Windows 7 64-bit, recent install, added Office 2010. When I create some boxes and open the quick-style menu, it crashes (or stops responding, in windowese, and then it sends an error report). I've run the "Repair" from the installer, but it didn't help. There's nothing in Windows Update I've Googled and searched on Microsoft's site, but n Any other ideas? (It's not related to this ppt crash question as that concerns PPT 2007. Error in event log: Faulting application name: POWERPNT.EXE, version: 14.0.4754.1000, time stamp: 0x4b967cf2 Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfe0 Exception code: 0xe0000003 Fault offset: 0x000000000000aa7d Faulting process id: 0xee8 Faulting application start time: 0x01cb9dc710fd76d8 Faulting application path: C:\Program Files\Microsoft Office\Office14\POWERPNT.EXE Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: 58766562-09ba-11e0-90d1-00215a139192 And: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: POWERPNT.EXE P2: 14.0.4754.1000 P3: 4b967cf2 P4: KERNELBASE.dll P5: 6.1.7600.16385 P6: 4a5bdfe0 P7: e0000003 P8: 000000000000aa7d P9: P10: Attached files: C:\Users\marcusl\AppData\Local\Temp\CVR86DD.tmp.cvr C:\Users\marcusl\AppData\Local\Temp\WERC765.tmp.WERInternalMetadata.xml These files may be available here: C:\Users\marcusl\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_POWERPNT.EXE_d45f313d77f7e52cc8682b2b64cc3898127c2c_1106e3ac Analysis symbol: Rechecking for solution: 0 Report Id: 58766562-09ba-11e0-90d1-00215a139192 Report Status: 1

  Read the article

• Webmin / Virtualmin running php as www-data, is locked out of viewing .htaccess and writing

  - by Kirill

  I've asked this on the virtualmin forums, but haven't had any help from there. Recently, "something" happened and it seems that the apache service has gone a bit weird. What it does: it runs all apache traffic as www-data and sometimes spawns the php5-cgi process as www-data, this is a problem because all the domain users own their directories and default permissions don't let www-data write to these folders (file uploads are dead) or read .htaccess (permalinks are broken in wordpress). I've googled this for about a week straight now, tried pretty much everything I could find and achieved nothing. The only thing that I think might actually be the cause of all this is this page: http:// - i.imgur.com/NYW3x.png (got shut down by the spam filter) So I figured if I set it to "default", this might magically start working again, but all it does is "crash" apache (all websites timeout). I figure it's something to do with the "mpm" module or something, but I can't find anything relevant in the settings to modify for it to work. Can someone please point me in the right direction? System info: Webmin version 1.580 Kernel and CPU Linux 2.6.35.4-rscloud on x86_64 Virtualmin version 3.90.gpl GPL Ubuntu 10.04 LTS (Lucid) A couple screenshots of top http://i.imgur.com/U2DTK.png http://i.imgur.com/sNPKs.png

  Read the article

• ERROR: Can't find the archive-keyring

  - by 23tux

  I'm trying to upgrade my Debian Lenny to Squeeze. I've replaced the word lenny to squeeze in sources.list and ran apt-get clean apt-get update apt-get dist-upgrade But after a while, I get this error Preconfiguring packages ... Setting up debian-archive-keyring (2010.08.28) ... ERROR: Can't find the archive-keyring Is the ubuntu-keyring package installed? dpkg: error processing debian-archive-keyring (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: debian-archive-keyring E: Sub-process /usr/bin/dpkg returned an error code (1) So I tried to install apt-get -f install debian-archive-keyring and I got the same error. Then I tried to install apt-get -f install ubuntu-keyring and I got this error: Reading package lists... Done Building dependency tree Reading state information... Done Package ubuntu-keyring is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package ubuntu-keyring has no installation candidate Maybe I have the wrong sources in my sources.list: deb ftp://mirror.hetzner.de/debian/packages squeeze main contrib non-free deb ftp://mirror.hetzner.de/debian/security squeeze/updates main contrib non-free deb http://ftp.de.debian.org/debian/ squeeze main non-free contrib deb-src http://ftp.de.debian.org/debian/ squeeze main non-free contrib deb http://security.debian.org/ squeeze/updates main contrib non-free deb-src http://security.debian.org/ squeeze/updates main contrib non-free Hope anyone can help me, thx, tux

  Read the article

• Is anyone using KVM in production?

  - by Andy Shellam

  I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

  Read the article

• How can I resolve Oracle 11g XE connection failure straight after installation?

  - by d3vid

  I have just installed Oracle 11g XE on a Windows 7 VirtualBox VM, using all the default options. "Getting Started" fails When I click on Getting Started I get taken to http://127.0.0.1:8080/apex/f?p=4950 which fails. After some browsing I came across a suggestion to confirm the HTTP port, but I can't get this far, because I can't connect. connect system fails If I select Run SQL command line I get taken to a SQL prompt. I enter connect system and get prompted for a password. I enter the password. I immediately get the following error: ERROR: ORA-01033: ORACLE initialization or shutdown in progress Process ID: 0 Session ID: 0 Serial number: 0 Info: Start database This happens whether or not I run Start database first. (Start database just opens a Windows command prompt window.) Info: Windows services My Oracle services start as follows: Starting the manual services doesn't resolve the problem. Enabling and starting the disabled service doesn't resolve the problem. Is there something I haven't done? How can I resolve this connection error?

  Read the article

< Previous Page | 673 674 675 676 677 678 679 680 681 682 683 684  | Next Page >