Search Results

Search found 20946 results on 838 pages for 'at command'.

Page 678/838 | < Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >

  • Ideas for time-keeping in a webbased RPG?

    - by ashy_32bit
    I'm assigned a task of doing the preliminary research stuff for a web-based MMO RPG. Now my buggiest problem here is "web based" vs "MMO RPG". I did some research about time keeping systems and I'm totally confused as how exactly something as real-time as an MMO-RPG can work on some pull-only (unidirectional) platform like HTTP. I know there is also a turn-based alternative to time keeping but can it work in an MMO setting ? EDIT: Take a battle for example, player A (human) wants to attack Player B (also human) in the open. How does it work when when player A issues the "attack" command on player B ? how do I inform player B that he is being attacked ? and then how exactly the battle goes on between the two in an HTTP based communication channel? To my knowledge this is impossible unless you resort to another technology (HTML is 1-way, that is you can just ask server and get response, server can't update you unless being asked to. this is very well-known and simply explained). So I though maybe I can somehow change the whole timekeeping model from real-time to a more non-real-time model (towards a turn based RPG for example) and somehow work around the whole problem of "interactivity". EDIT2: It is not that I don't wanna use any server side technologies. For sure it is not gonna work client-side-only even for the most trivial of the multi-player games, let alone an RPG. So sure there would be a (probably complex) server side component to it (the so called Game Engine I suppose). The problem is not the technology that implements the logic (game mechanics) bits but the communication technology and how it limits the game mechanics abilities (like how real-time or turn based it is gonna be). HTTP is a request-response protocol meaning you get served only if you ask for it (explicitly send a GET or POST request to the server). HTTP server can not inform you if anything of interest happens in the game world unless you refresh the page (as some suggested) or you use some bi-directional tech (totally different animals) like Flash, WebSock, HTML5 etc etc. So maybe the question is: Is it possible to implement a MMORPG using only HTML5/PHP and no periodic page refreshes? if so what would be rules to make it an MMO-RPG? Can't explain it any clearer. Sorry :D

    Read the article

  • OBIEE 11.1.1.5.0 Bundle Patch 2 is available

    - by mshahi
    Oracle BI EE 11.1.1.5.0 Bundle Patch 2 is available. The Patch number is 13611078 and it can be downloaded from Oracle Support (you can download it without password). This patch currently is available on Microsoft Windows x64 (64 bit), Linux x86 - 64 bit, IBM AIX on Power System (64 bit) and Oracle Solaris Sparc (64 bit). Remaining four platforms Win32, Linux32, HP-Itanium, and Solaris x86-64 are expected 3-4 weeks later. This Patch has thoroughly been tested and signed off by BI QA Team.  Important things to know: 1. All the customers are advised to apply this patch as it contains around 248 bug fixes. Please read the README file for all the bug fixes contained in this patch.   2. This patch can be applied via opatch. Please follow the standard process of applying this patch using opatch, i.e. stop all BI System processes via opmnctl, Stop WLS Managed and Admin Servers, Apply Patch, Start WLS Admin and Managed Servers, Check if all the J2EE applications are running fine, Start all BI System Processes via opmnctl command, and verify your fixes. It is advised to test this patch on Non Productions Instances first, run all the required tests / regressions and then move it to Production.    3. This Bundle Patch is cumulative to 11.1.1.5.0 BP1 (13562882) which was released in January 2012 on Linux x86 - 64 bit which contained around 64 bug fixes. Customers who have applied 11.1.1.5.0 BP1, will get expected OPatch conflict message, they can safely roll back BP1 prior to installing this BP2 or let opatch roll back BP1 during its application process.   4. Customer who have applied some one off patches and these one off patches are also part of 11.1.1.5.0 BP2, they can also roll back their existing one off patches after confirming that their fixes are part of BP2.    5. This Bundle Patch is not cumulative on top of 11.1.1.5.0, meaning this bundle patch does not contain all the one off fixes that were delivered on top of 11.1.1.5.0. All the remaining one off fixes delivered so far, will be available in next scheduled bundle patch i.e. 11.1.1.5.0 BP3. Please check the README file and let support know if your existing fixes are not part of BP2, so that support can open One Off Backport (OOB) request to have them included in next patch i.e. BP3.   6. 11.1.1.5.0 BP3 is in planning stages, and dates for it's availability will be announced in next couple of weeks.

    Read the article

  • Problems installing clamcour

    - by user10778
    Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

    Read the article

  • Best way to remote restart Ubuntu from Windows machine

    - by robsoft
    Background: I'm looking to put a series of Ubuntu machines into retail locations, they're being used as dumb kiosks to show a series of slides onto large LCD panel TV screens. Once installed, they won't have a keyboard or mouse connected but will have a fixed IP on the local network. Everything is configured to auto-start, no automatic updates, no power saving etc - I think we're pretty-much good to go apart from one thing. I need the retail staff to be able to restart the boxes if a problem arises. We have VNC running (now that we've turned off desktop enhancements!) so that we can remotely get into the machines if we need to, but that's not something we would allow the retail staff to do. The machines are going to be physically 'out of the way' (probably in the ceiling space) so the power button is not easily accessible!. I'd like to have some means of allowing the retail staff to restart the Ubuntu machine, from the desktop of one of their Windows terminals. I don't really want to give them some kind of raw terminal access (the command line will frighten them!) and I don't want them to use VNC (as stated above). Ideally there would be an icon on the Windows desktop, they double-click it, reply to a simple 'are you sure?' prompt, and then the Ubuntu box is told to restart. The Windows side of that won't be a problem, we can write something using Delphi, Python & Qt4, whatever - it's the Ubuntu side of it I'm stuck with. Out of sight/view, could I have a Windows program open a terminal across the network and tell Ubuntu to restart? Is this what SSH could be used for (I have never set that kind of thing up). The Windows programming side isn't really an issue, it's just that I'm a total Ubuntu noob and don't know where to start from the platform point of view. The other thing we considered is also having the machine automatically restart itself at a set time each day (obviously out of store hours!). To me, that seems a bit unnecessary (though forcing a restart once a week/month might be worthwhile). Any thoughts or suggestions? Being able to restart the box on demand across the network is my prime requirement.

    Read the article

  • Cron job running successfully suddenly reports script is not found

    - by Ted B
    What might cause cron to suddenly report a file it is supposed to run is "not found," when the file hasn't been touched, and in fact, the entire system hasn't been touched since it last ran successfully? I have a cronjob schedule I define by doing sudo crontab -e In it, I have dozens of cron jobs that run successfully.. I do not have a PATH specified, and I use absolute paths to call all my scheduled scripts, setting the PATH in them as needed. I do not specify a SHELL in the crontab. All scripts identify the shell as their first line. Without me touching the system, a particular job defined in the middle of other jobs will suddenly stop running. To debug this, I added an output redirection to a log file. In that, the output clearly shows the output of the script successfully running time after time for weeks, and then suddenly the following appears: /bin/sh: /home/iupress/bin/sync-email_images: not found /bin/sh: /home/iupress/bin/sync-email_images: not found /bin/sh: /home/iupress/bin/sync-email_images: not found /bin/sh: /home/iupress/bin/sync-email_images: not found /bin/sh: /home/iupress/bin/sync-email_images: not found /bin/sh: /home/iupress/bin/sync-email_images: not found /bin/sh: /home/iupress/bin/sync-email_images: not found /bin/sh: /home/iupress/bin/sync-email_images: not found /bin/sh: /home/iupress/bin/sync-email_images: not found If I do the ls command, copying and pasting that exact path from the error message, it clearly reports the file is still there (no surprise). Yet the log continues to report that file is "not found" until I take action. I can run the script manually and it runs just fine. If I do sudo crontab -e and save the file, the job runs on the next scheduled time, putting its output in the log, no longer reporting the script is "not found". It seems to me the contents of the script trying to be run are irrelevant since cron doesn't even process the file because it is "not found". I have a job scheduled below the one that is encountering this problem that I know is continuing to run, because I have its output mailed to me. So I know cron is running and continues to run at least one other job, even after it suddenly reports this job's script is "not found". All my lines end with a newline. I had no periods in the crontab until I added the redirection to a log file. I have now added a PATH specification, but left the absolute paths in the jobs. Unfortunately, I have no idea if and when this problem will occur. It will likely be weeks from now. By the way, I am running a script to syncronize the clock, and I see the time is exactly what it should be.

    Read the article

  • No network connectivity (not wired or wireless) - RT5390

    - by Ben Udy
    I am starting to think I simply need to accept a small loss and sell my new ASUS K73E. Because I really don't enjoy computing when I have to deal with Windough$ and this windows 7 64 bit on my new ASUS is even worse than the old machines with XP. I have written to ASUS and they simply say "We don't support Linux" and while Ralink's website says they do support Linux I can't get anyone to tell me what model Ralink card might be in my machine. Is anyone out there who might be able to give me some useful advice???? Here is the answer to command lspci nn && lsusb && lsmod && rfkill list all: di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 Edit #2 lspci 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c49 (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 02:00.0 Network controller: RaLink Device 5390 03:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0) lsusb Bus 002 Device 002: ID 8087:0024 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks Bus 001 Device 002: ID 8087:0024 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks for the suggestion because this gave me a model for Ralink RT5390. I have now gone to Ralink.com and downloaded (via Windows 7) the driver package (it is a bz2 file). I hope I can figure out how to install it. And FYI - I was not able to run su (not authorized?) and dmidecode didn't exist (probably needs to be downloaded BUT no internet yet in Ubuntu)

    Read the article

  • Reading a ZFS USB drive with Mac OS X Mountain Lion

    - by Karim Berrah
    The problem: I'm using a MacBook, mainly with Solaris 11, but something with Mac OS X (ML). The only missing thing is that Mac OS X can't read my external ZFS based USB drive, where I store all my data. So, I decided to look for a solution. Possible solution: I decided to use VirtualBox with a Solaris 11 VM as a passthrough to my data. Here are the required steps: Installing a Solaris 11 VM Install VirtualBox on your Mac OS X, add the extension pack (needed for USB) Plug your ZFS based USB drive on your Mac, ignore it when asked to initialize it. Create a VM for Solaris (bridged network), and before installing it, create a USB filter (in the settings of your Vbox VM, go to Ports, then USB, then add a new USB filter from the attached device "grey usb-connector logo with green plus sign")  Install a Solaris 11 VM, boot it, and install the Guest addition check with "ifconfg -a" the IP address of your Solaris VM Creating a path to your ZFS USB drive In MacOS X, use the "Disk Utility" to unmount the USB attached drive, and unplug the USB device. Switch back to VirtualBox, select the top of the window where your Solaris 11 is running plug your ZFS USB drive, select "ignore" if Mac OS invite you to initialize the disk In the VirtualBox VM menu, go to "Devices" then "USB Devices" and select from the dropping menu your "USB device" Connection your Solaris VM to the USB drive Inside Solaris, you might now check that your device is accessible by using the "format" cli command If not, repeat previous steps Now, with root privilege, force a zpool import -f myusbdevicepoolname because this pool was created on another system check that you see your new pool with "zpool status" share your pool with NFS: share -F NFS /myusbdevicepoolname Accessing the USB ZFS drive from Mac OS X This is the easiest step: access an NFS share from mac OS Create a "ZFSdrive" folder on your MacOS desktop from a terminal under mac OS: mount -t nfs IPadressofMySoalrisVM:/myusbdevicepoolname  /Users/yourusername/Desktop/ZFSdrive et voila ! you might access your data, on a ZFS USB drive, directly from your Mountain Lion Desktop. You might play with the share rights in order to alter any read/write rights as needed. You might activate compression, encryption inside the Solaris 11 VM ...

    Read the article

  • Bootloader Problems Grub Won't Load Windows 7

    - by user108805
    I sent this to [email protected], still no response thought I could get a faster solution here. I am running Windows 7 64-bit and Ubuntu 12.04 LTS on separate partitions. The message is sent is: Boot-Repair URL: http://paste.ubuntu.com/1365163/ Originally I was unable to access Ubuntu after a windows update (Ubuntu was installed using wubi). Rather than logging into Ubuntu from the Windows 7 Bootloader, it lead to the grub command prompt. No matter what I did here, it would not log me into linux. As a result I uninstalled Ubuntu from the Add/Remove Programs application in Windows 7. I then re-installed Ubuntu 12.04 LTS using a liveCD-USB. This time however, I created a partition. I then restarted and got the GRUB bootloader which loads Ubuntu 12.04 LTS with no problems, however when I select windows (listed as "Windows 7 (loader)"), it just refreshes the grub bootloader instead of loading Windows 7. I then used the Windows 7 repair disk to run bootrec/fixmbr and bootrec/fixboot. This led to no bootloader coming up when I started my computer. Instead I got a blank black screen with a flashing white cursor. I went on to do a bootrec/buildbcd and bootrec/scanos. These did nothing to change the situation. When I ran bootrec/scanos it said that no Windows 7 installations were present. After this I decided to reinstall WIndows 7 only for this to do nothing to change the situation. Afterwards I did a boot-repair in which I began to get the GRUB bootloader, which would load ubuntu 12.04 LTS, but still would not load Windows 7. I also did a sudo update-grub which recognized Windows 7 as being installed, but still didn't fix the issue of loading Windows 7. While running Ubuntu I have no problem accessing my WIndows 7 partition which is formatted as NTFS. It shows all the files and folders reflecting that the re-install did take place, and it also shows all of my old applications and folders in the Windows.old folder. I am completely stuck at this point and have no clue what I should do next. Any help you can offer me will be greatly appreciate. Thank You --gap

    Read the article

  • Problems building clamcour

    - by user10778
    Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

    Read the article

  • Why does switching users completely hang my system every time?

    - by Stéphane
    I have a fresh install of 11.04 64bit, with 2 administrator accounts and 4 normal accounts. The 4 normal accounts (the kids' accounts) don't have passwords, they can login simply by clicking on their names. When any of the users -- either admin or normal -- tries to switch to another account by clicking in the top-right corner of the screen and selecting another user, the screen goes black and the entire system locks up. Even CTRL+ALT+F1 through F7 does nothing. This is reproducible 100% of the time on this system. I can ssh into the box when the console locks up, and by running top, I see that Xorg is consuming about 100% of the CPU. Looking at the output of "ps axfu" in bash while the system is in this "locked up" state, here is the lightdm and X process tree: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1153 0.0 0.1 183508 4292 ? Ssl Dec26 0:00 lightdm root 2187 0.4 4.6 265976 164168 tty7 Ss+ 00:43 0:21 \_ /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch stephane 2612 0.0 0.3 266400 10736 ? Ssl 01:52 0:00 \_ /usr/bin/gnome-session --session=ubuntu stephane 2650 0.0 0.0 12264 276 ? Ss 01:52 0:00 | \_ /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /usr/bin/gnome-session --session=ubuntu stephane 2703 0.8 3.0 562068 106548 ? Sl 01:52 0:08 | \_ compiz stephane 2801 0.0 0.0 4264 584 ? Ss 01:52 0:00 | | \_ /bin/sh -c /usr/bin/compiz-decorator stephane 2802 0.0 0.3 265744 13772 ? Sl 01:52 0:00 | | \_ /usr/bin/unity-window-decorator ...cut... root 3024 80.6 0.3 107928 13088 tty8 Rs+ 01:53 12:34 \_ /usr/bin/X :1 -auth /var/run/lightdm/root/:1 -nolisten tcp vt8 -novtswitch That last process, pid #3024 in this case, is what has the CPU pegged. In case it matters (I suspect it might) here is what I think may be the relevant information for my video card, taken from /var/log/Xorg.0.log: [ 3392.653] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so [ 3392.653] (II) Module glx: vendor="FireGL - AMD Technologies Inc." [ 3392.653] compiled for 6.9.0, module version = 1.0.0 ... [ 3392.655] (II) LoadModule: "fglrx" [ 3392.655] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so [ 3392.672] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 3392.672] compiled for 1.4.99.906, module version = 8.88.7 [ 3392.672] Module class: X.Org Video Driver ... [ 3392.759] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 3392.759] (--) fglrx(0): Chipset: "AMD Radeon HD 6410D" (Chipset = 0x9644) Lastly: I did see this posting: Change user on 11.10 hangs system ...but I checked, and the libpam-smbpass package isn't installed on this system.

    Read the article

  • Alternatives to multiple inheritance for my architecture (NPCs in a Realtime Strategy game)?

    - by Brettetete
    Coding isn't that hard actually. The hard part is to write code that makes sense, is readable and understandable. So I want to get a better developer and create some solid architecture. So I want to do create an architecture for NPCs in a video-game. It is a Realtime Strategy game like Starcraft, Age of Empires, Command & Conquers, etc etc.. So I'll have different kinds of NPCs. A NPC can have one to many abilities (methods) of these: Build(), Farm() and Attack(). Examples: Worker can Build() and Farm() Warrior can Attack() Citizen can Build(), Farm() and Attack() Fisherman can Farm() and Attack() I hope everything is clear so far. So now I do have my NPC Types and their abilities. But lets come to the technical / programmatical aspect. What would be a good programmatic architecture for my different kinds of NPCs? Okay I could have a base class. Actually I think this is a good way to stick with the DRY principle. So I can have methods like WalkTo(x,y) in my base class since every NPC will be able to move. But now lets come to the real problem. Where do I implement my abilities? (remember: Build(), Farm() and Attack()) Since the abilities will consists of the same logic it would be annoying / break DRY principle to implement them for each NPC (Worker,Warrior, ..). Okay I could implement the abilities within the base class. This would require some kind of logic that verifies if a NPC can use ability X. IsBuilder, CanBuild, .. I think it is clear what I want to express. But I don't feel very well with this idea. This sounds like a bloated base class with too much functionality. I do use C# as programming language. So multiple inheritance isn't an opinion here. Means: Having extra base classes like Fisherman : Farmer, Attacker won't work.

    Read the article

  • Unity Dash and top toolbar won't open after updating to 12.10

    - by pgrytdal
    Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • Function like C# properties?

    - by alan2here
    I was directed here from SO as a better stack exchange site for this question. I've been thinking about the neatness and expression of C# properties over functions, although they only currently work where no parameters are used, and wondered. Is is possible, and if so why not, to have a stand alone function like C# property. For example: public class test { private byte n = 4; public test() { func = 2; byte n2 = func; func; } private byte func { get { return n; } set { n = value; } func { n++; } } } edit: Sorry for the vagueness first time round. I'm going to add some info and motivation. The 'n++' here is just a simple example, a placeholder, it's not intended to be representative of the actual code that would be used. I'm also looking at this from the point of view of looking at the property command as is, not in the context of using it for 'get_xyz' and 'set_xyz' member functions, which is certainly useful, but of instead comparing it more abstractly to functions and other programic elements. A 'get' property can be used instead of a function that takes no parameters, and syntactically they are perhaps only aesthetically, but as I see it noticeably nicer. However, properties also add the potential for an extra layer of polymorphism, one that relates to the 'func = 4;' getting, 'int n = func;' setting or 'func;' function like context in which they are used as well as the more common parameter based polymorphism. Potentially allowing for a lot of expression and contextual information reguarding how other would use your functions. As in many places uses and definitions would remain the same, it shouldn't break existing code. private byte func { get { } get bool { } set { } func { } func(bool) { } func(byte, myType) { } // etc... } So a read only function would look like this: private byte func { get { } } A normal function like this: private void func { func { } } A function with parameter polymorphism like this: private byte func { func(bool) { } func(byte, myType) { } } And a function that could return a value, or just compute, depending on the context it is used, that also has more conventional parameter polymorphism as well, like so: private byte func { get { } func(bool) { } func(byte, myType) { } }

    Read the article

  • Nvidia GT218 repository drivers don't work

    - by user1042840
    I upgraded all packages with sudo apt-get upgrade command on my Ubuntu 10.04 box and I have Ubuntu 12.04 3.2.0-29-generic-pae now. I have two monitors and the following GPU: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 300] (rev a2) After upgrading to 12.04, I somehow lost my previous setup with one common workspace stretched across two monitors. When Ubuntu starts only one monitor is on. I can see the message on the active monitor: Not optimum mode. Recommended mode: 1680x1050 60Hz I used Nvidia proprietary drivers on 10.04 but now jockey-text --list shows: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Disabled, Not in use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Enabled, Not in use) When I run sudo nvidia-settings it says You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.' I typed nvidia-xconfig and rebooted, but jockey-text --list says the same after the reboot: Not in use. The same with nvidia-current - Enabled but Not in use. I also tried nvidia-173 but I ended up in tty immediately at startup so I removed it. I used to have some problems with Nvidia proprietary drivers on 10.04, I had to put paths to EDID files in /etc/X11/xorg.conf explicitly, but the resolution was as recommended and both monitors were working. If I understand correctly, nouveau drivers are used now by default because the resolution is still quite high, definitely not 800x600, xrandr showed: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 66.0* 1280x1024 76.0 1024x768 76.0 800x600 73.0 640x480 73.0 640x400 0.0 320x400 0.0 1680x1050_60.00 (0x4f) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz However, colors seem a bit faded and blurry with nouveau drivers. Mouse cursor is invisible if it's placed inside Firefox window, and only one monitor is working. I like open source and if it's possible I'd prefer to use nouveau drivers but a few things should be fixed. I'm curious why nvidia-current drivers from the repository don't work now. I read it has something to do with the new X11 server in Ubuntu 12.04, is it true? How can I get it back to work?

    Read the article

  • I'm a C Programmer, but I can't find a comfortable environment to work in

    - by Jesse Brands
    Hello everyone, Last time I asked a question, I was having issues dealing with Java which I had to do for a course work. I generally use C for my development work - especially personal projects - and I've grown up in what is pretty much a Linux/UNIX world. In this world, it was easy to use C, you had your C compiler (GCC is excellent in that regard) and a wealth of tools such as the command line and vi/emacs/whatever-you-got. However, that was all that I really liked about Linux/UNIX. It really fitted well with the C language; nowadays, I'm somewhat forced into Windows/Mac OS X for most of my work. C seems poorly supported on a mac for starters, there's no GUI API to use and pretty much you get forced into Obj-C. This is not a problem, I like Objective-C, but it's another language I have to learn. Now coming to Windows. Why does everything about Windows Development try to scare me away? It's basically come down to: USE C# AND .NET OR DIE. I don't like C#, I like C, they are fundamentally different. Yet when I make a Windows Forms application in MSVC++ (I know that's not C), I get a main function riddled with weird things I've never heard of before, along with a poor, barely-compliant C/C++ compiler. What am I to do when I just want to program in C, make applications that look and feel like native Windows applications (I am a sucker for aesthetics, and I'm not looking to make something cross-platform. I just want it to work on Windows, and look as native as possible.). C++ is a fine alternative, but it really looks like the only way to make a decent, native feeling Windows application, is to use C#. Am I missing something here? I'd rather not use CYGWIN. Like I said, I want people to install the program, and it should just work out of the box on Windows 7. Program in question involves a Media Player, if anyone is curious what I'm targetting at. Anyone who had the same experiences who can help me out? How can I code something in ANSI C and still have a native feel?

    Read the article

  • Quick run through of the WP7 Developer Tools January 2011

    - by mbcrump
    In case you haven’t heard the latest WP7 Developers Tool update was released yesterday and contains a few goodies. First you need to go and grab the bits here. You can install them in any order, but I installed the WindowsPhoneDeveloperResources_en-US_Patch1.msp first. Then the VS10-KB2486994-x86.exe. They install silently. In other words, you would need to check Programs and Features and look in Installed Updates to see if they installed successfully. Like the screenshot below: Once you get them installed you can try out a few new features. Like Copy and Paste. Just fire up your application and put a TextBox on it and Select the Text and you will have the option highlighted in red above the text. Once you select it you will have the option to paste it. (see red rectangle below). Another feature is the Windows Phone Capability Detection Tool – This tool detects the phone capabilities used by your application. This will prevent you from submitting an app to the marketplace that says it uses x feature but really does not. How do you use it? Well navigate out to either directory: %ProgramFiles%\Microsoft SDKs\Windows Phone\v7.0\Tools\CapDetect %ProgramFiles (x86)%\Microsoft SDKs\Windows Phone\v7.0\Tools\CapDetect and run the following command: CapabilityDetection.exe Rules.xml YOURWP7XAPFILEOUTPUTDIRECTORY So, in my example you will see my app only requires the ID_CAP_MICROPHONE. Let’s see what the WmAppManifest.xml says in our WP7 Project: Whoa! That’s a lot of extra stuff we don’t need. We can delete unused capabilities safely now. Some of the other fixes are: (Copied straight from Microsoft) Fixes a text selection bug in pivot and panorama controls. In applications that have pivot or panorama controls that contain text boxes, users can unintentionally change panes when trying to copy text. To prevent this problem, open your application, recompile it, and then resubmit it to the Windows Phone Marketplace. Windows Phone Connect Tool – Allows you to connect your phone to a PC when Zune® software is not running and debug applications that use media APIs. For more information, see How to: Use the Connect Tool. Updated Bing Maps Silverlight Control – Includes improvements to gesture performance when using Bing™ Maps Silverlight® Control. Windows Phone Developer Tools Fix allowing deployment of XAP files over 64 MB in size to physical phone devices for testing and debugging. That’s pretty much it. Thanks again for reading my blog!  Subscribe to my feed CodeProject

    Read the article

  • dpkg crashing while trying to install a package

    - by Jonathan
    While attempting to install a package via apt-get the following. The first error I get is: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. And, if I run that command the box spins out of control and I get the following in /var/log/syslog Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398546] ------------[ cut here ]------------ Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398552] WARNING: at /build/buildd/linux-3.0.0/arch/x86/xen/multicalls.c:182 xen_mc_flush+01c0() Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398561] Modules linked in: acpiphp Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398568] Pid: 31063, comm: java Tainted: G D W 3.0.0-14-virtual #23-Ubuntu Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398576] Call Trace: Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398580] [<c0648265>] ? printk+0x2d/0x2f Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398586] [<c0150462>] warn_slowpath_common+0x72/0xa0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398593] [<c0104883>] ? xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398599] [<c0104883>] ? xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398605] [<c01504b2>] warn_slowpath_null+0x22/0x30 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398611] [<c0104883>] xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398617] [<c0104e7a>] ? xen_extend_mmu_update+0x4a/0x70 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398624] [<c0106565>] xen_set_pud_hyper+0x75/0x80 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398630] [<c01065b9>] xen_set_pud+0x49/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398636] [<c0132105>] pud_populate+0x45/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398642] [<c0208a24>] __pmd_alloc+0x74/0x90 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398648] [<c0208cb7>] handle_mm_fault+0x277/0x2c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398655] [<c065f45b>] do_page_fault+0x15b/0x4a0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c020ba24>] ? remove_vma+0x44/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c020d9b6>] ? sys_mmap_pgoff+0x106/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c065f300>] ? vmalloc_fault+0x190/0x190 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c065c79f>] error_code+0x67/0x6c Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] ---[ end trace 0b105e2a179ad013 ]---

    Read the article

  • How to troubleshoot ethernet port on laptop

    - by Psallas Vassilios
    I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

    Read the article

  • Once installed geos library (C++, and C), and then trying to install rgeos package (R), it reports geos-config missing!

    - by user1873888
    Knowing that the package rgeos, from the R language, requieres a prior installation of geos libraries, I installed, both, libgeos and libgeos-c1 (3.2.2), using the synaptic installer in my Ubuntu 12.04 (32 bit) machine. Then I tried to install rgeos directly from the R console, and it issued a message in the sense that geos-config was not found. The output is as follows: > install.packages("rgeos") Installing package(s) into ‘/home/checo/R/i486-pc-linux-gnu-library/2.15’ (as ‘lib’ is unspecified) also installing the dependency ‘sp’ probando la URL 'http://cran.rstudio.com/src/contrib/sp_1.0-9.tar.gz' Content type 'application/x-gzip' length 882102 bytes (861 Kb) URL abierta ================================================== downloaded 861 Kb probando la URL 'http://cran.rstudio.com/src/contrib/rgeos_0.2-19.tar.gz' Content type 'application/x-gzip' length 221471 bytes (216 Kb) URL abierta ================================================== downloaded 216 Kb * installing *source* package ‘sp’ ... ** package ‘sp’ successfully unpacked and MD5 sums checked ** libs gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c R centroid.c -o Rcentroid.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c gcdist.c -o gcdist.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c init.c -o init.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip.c -o pip.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip2.c -o pip2.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c sp_xports.c -o sp_xports.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c surfaceArea.c -o surfaceArea.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c zerodist.c -o zerodist.o gcc -std=gnu99 -shared -o sp.so Rcentroid.o gcdist.o init.o pip.o pip2.o sp_xports.o surfaceArea.o zerodist.o -L/usr/lib/R/lib -lR installing to /home/checo/R/i486-pc-linux-gnu-library/2.15/sp/libs ** R ** data ** demo ** inst ** preparing package for lazy loading ** help *** installing help indices ** building package indices ** installing vignettes ‘intro_sp.Rnw’ ‘over.Rnw’ ** testing if installed package can be loaded * DONE (sp) * installing *source* package ‘rgeos’ ... ** package ‘rgeos’ successfully unpacked and MD5 sums checked configure: CC: gcc -std=gnu99 configure: CXX: g++ configure: rgeos: 0.2-17 checking for /usr/bin/svnversion... no configure: svn revision: 394 checking geos-config usability... ./configure: line 1385: geos-config: command not found no configure: error: geos-config not usable ERROR: configuration failed for package ‘rgeos’ * removing ‘/home/checo/R/i486-pc-linux-gnu-library/2.15/rgeos’ Warning in install.packages : installation of package ‘rgeos’ had non-zero exit status Forgive my ignorance, but I don't know where this file, "geos-config", comes from: should it be generated by the gcc compilations above, or should it be previously installed when the libgeos libraries were intalled? I learnt, from another machine, that "geos-config" is an executable and that it should be installed in /usr/bin. Do you have any idea on what's wrong with my procedure? Thanks, -Sergio.

    Read the article

  • How do I take responsibility for my code when colleague makes unnecessary improvements without notice?

    - by Jesslyn
    One of my teammates is a jack of all trades in our IT shop and I respect his insight. However, sometimes he reviews my code (he's second in command to our team leader, so that's expected) without a heads up. So sometimes he reviews my changes before they complete the end goal and makes changes right away... and has even broken my work once. Other times, he has made unnecessary improvements to some of my code that is 3+ months old. This annoys me for a few reasons: I am not always given a chance to fix my mistakes He has not taken the time to ask me what I was trying to accomplish when he is confused, which could affect his testing or changes I don't always think his code is readable Deadlines are not an issue and his current workload doesn't require any work in my projects other than reviewing my code changes. Anyways, I have told him in the past to please keep me posted if he sees something in my work that he wants to change so that I could take ownership of my code (maybe I should have said "shortcomings") and he's not been responsive. I fear that I may come off as aggressive when I ask him to explain his changes to me. He's just a quiet person who keeps to himself, but his actions continue. I don't want to banish him from making code changes (not like I could), because we are a team--but I want to do my part to help our team. Added clarifications: We share 1 development branch. I do not wait until all my changes complete a single task because I risk losing some significant work--so I make sure my changes build and do not break anything. My concern is that my teammate doesn't explain the reason or purpose behind his changes. I don't think he should need my blessing, but if we disagree on an approach I thought it would be best to discuss the pros and cons and make a decision once we both understand what is going on. I have not discussed this with our team lead yet as I would prefer to resolve personal disagreements without getting management involved unless it is necessary. Since my concern seemed more of personal issue than a threat to our work, I chose to not bother the team lead. I am working on code review process ideas--to help promote the benefits of more organized code reviews without making it all about my pet peeves.

    Read the article

  • Got Samba, Got PyNeighbourhood but still no connection. What else do I need?

    - by Frank A
    I am sure I had already hit post before but then could only find it by backing through browser. Was it deleted? is the question too dumb, sorry that I do not know the right jargon just trying to get answers to my problem anyway have reworded stuff a bit This seems to be a number one requirement for lots of people and 2 months on from setting up my Ubuntu pc, I am still unable to get a lasting connection in either direction. Adding a windows pc to a network is so easy... just a few clicks and get on with using it all. Using all command approaches and modifying configuration files is hardly user friendly. Googling brings up thousands of solutions but mostly they are too techy or assume the user is fully aware of how to use Linux. I do realise that their must be a lot of flavours for connecting to networks. So far I have installed Samba and fiddled with its config file. The day I did all that it worked from XP to Ubuntu. When I came back two days later to transfer my data over it would not connect. Although the the share does show up in Windows (XP) My Network Places. Today I installed PyNeighbourhood and this shows the Ubuntu box and all of the shares I had created at some point on Ubuntu and it even shows this under the XP workgroup name. But instructions on setting the connection up seem to relate to an earlier version and nothing seems to work there either. (I unshared most of those test folders but they still show up her but that is another question. When I click on mount- I can only click on one on the Ubuntu machine, there is one with no name so I assume this to be my attempt to add one XP Shared drive using ipaddress, I get errors. (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) OK tried to find the manual referred to... only an old comment that manual would be produced for future versions. I saw in another thread that Winbind is needed as well or at least I assume as well? Totally lost again? Please help, what else needs to be installed to connect to win pcs on the network.

    Read the article

  • Setting MTU on Exalogic

    - by csoto
    For many reasons, a system administrator may want to change the MTU settings of a server. But in a system like Exalogic which contains lots of interconnected nodes and other various components, it's important to understand how this applies to the different networks. For example, when bringing up bonding of InfiniBand an error like the following may be thrown: Bringing up interface bond1: SIOCSIFMTU: Invalid argument Both scripts ifcfg-ib0 and ifcfg-ib1 (from the /etc/sysconfig/network-scripts/ direectory) have MTU set to 65500, which is a valid MTU value only if all IPoIB slaves operate in connected mode and are configured with the same value, so the line below must be added to both network scripts and then restart the network: CONNECTED_MODE=yes By the way, an error of the form “SIOCSIFMTU: Invalid argument” indicates that the requested MTU was rejected by the kernel. Typically this would be due to it exceeding the maximum value supported by the interface hardware. In that case you must either reduce the MTU to a value that is supported or obtain more capable hardware. This problem has been seen when trying to modify the MTU using the ifconfig command, like the output of the example below: [root@elxxcnxx ~]# ifconfig ib1 mtu 65520 SIOCSIFMTU: Invalid argument It's important to insist that in most cases the nodes must be rebooted after the MTU size has been changed. Although in some circumstances it may work without a reboot, it is not how it is typically documented. Now, in order to achieve a reduced memory consumption and improve performance for network traffic received on IPoIB related interfaces, it is recommend to reduce the MTU value in interface configuration files for IPoIB related bonds from 65520 to 64000. The change needs to be made to interface configuration files under the /etc/sysconfig/network-scripts directory and applies to the interface configuration files for bonds over IPoIB related slave devices, for example /etc/sysconfig/network-scripts/ifcfg-bond1. However, keep in mind that the numeric portion of the interface filenames that corresponding to IPoIB interfaces is expected to vary across compute nodes and vServers and so cannot be relied upon to identify which interface files are for bonds are over IPoIB rather than EoIB related slave interfaces. To fix these MTU values to the recommended settings, there are very useful instructions and a script on the MOS Note 1624434.1, and it's applicable physical and virtual configurations of Exalogic. Regarding the recommended MTU value for EoIB related interfaces, its maximum appropriate value is 1500. If for some reason a vServer has been created with a higher value (set on the /etc/sysconfig/network-scripts/ifcfg-bond0 file), then it must be fixed. An error like the following could be thrown under this circumstance: [root@vServer ~]# service network restart ... Bringing up interface bond0:  SIOCSIFMTU: Invalid argument Also an error like the one below can be seen on the /var/log/messages file of the vServer: kernel: T5074835532 [mlx4_vnic] eth1:vnic_change_mtu:360: failed: new_mtu 64000 2026 The MOS Note 1611657.1 is very useful for this purpose.

    Read the article

  • I cannot remove/install software some dependency issue?

    - by Ryuzaki
    I'm having difficulty trying to install/uninstall applications in Ubuntu 12.04 LTS. I have this warning error that appears on my desktop in the form of a red icon with a line through it and it states: An error occurred, please run Package Manager from the right-click menu or apt-get in a terminal to see what is wrong. The error message was: 'Error: BrokenCount 0' — This usually means that your installed packages have unmet dependencies. I tried to repair automatically through ubuntu software center and I kept getting errors or it just didn't seem to work. Afterwards, I opened terminal and used sudo apt-get check command to see what the problem was and the results yielded: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libjack-jackd2-0 : Breaks: libjack-jackd2-0:i386 (!= 1.9.8~dfsg.1-1ubuntu1) but 1.9.8~dfsg.2-1precise1 is installed libjack-jackd2-0:i386 : Breaks: libjack-jackd2-0 (!= 1.9.8~dfsg.2-1precise1) but 1.9.8~dfsg.1-1ubuntu1 is installed E: Unmet dependencies. Try using -f. After I ran sudo apt-get -f install (in an attempt to fix the issue at hand), I encountered the following errors/code: okudaira@haru-kano:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 24 not upgraded. 1 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 181702 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) The real problem I'm having is interpreting what is being stated. I'm fairly new to the ubuntu experience so I'm not very well-versed with the terminology and the entire in's and out's. Can someone tell me what's wrong with my system? I can no longer install/remove any programs at all.

    Read the article

  • What are these errors when I try to "make" the driver of my wireless network?

    - by Tom Brito
    I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme file say to use the "make" command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

    Read the article

  • How to Add a Taskbar to the Desktop in Ubuntu 14.04

    - by Lori Kaufman
    If you’ve switched to Ubuntu from Windows, it may take some time to get used to the new and different interface. However, you can easily incorporate a familiar Windows feature, the Taskbar, into Ubuntu to make the transition easier. A tool called Tint2 provides a bar at the bottom of the Ubuntu Desktop that resembles the Windows Taskbar. We will show you how to install it and make it start every time you log into Ubuntu. NOTE: When we say to type something in this article and there are quotes around the text, DO NOT type the quotes, unless we specify otherwise. Press Ctrl + Alt + T to open a Terminal window. To install Tint2, type the following line at the prompt and press Enter. sudo apt-get install tint2 Type your password at the prompt and press Enter. The progress of the installation displays and then a message displays saying how much disk space will be used. When asked if you want to continue, type a “y” and press Enter. When the installation has finished, close the Terminal window by typing “exit” at the prompt and pressing Enter. Click the Search button at the top of the Unity bar. Start typing “startup applications” in the Search box. Items that match what you type start displaying below the Search box. When the Startup Applications tool displays, click the icon to open it. On the Startup Applications Preferences window, click Add. On the Add Startup Program dialog box, enter a name for the startup application. This name displays in the list on the Startup Applications Preferences window. Type “tint2” in the Command edit box, enter a description in the Comment edit box, if desired, and click Add. Tint2 is added as a startup program and will start every time you log into Ubuntu. Click Close to close the Startup Applications Preferences window. Log out and log back in to make the Taskbar available on the desktop. You do not need to reboot the computer for this change to take effect. Now, when you minimize a program, an icon for it displays on the Taskbar at the bottom of the screen, just like the Taskbar in Windows. If you decide that you don’t want the Taskbar to display every time you log into Ubuntu, you can uncheck the Tint2 startup program on the Startup Applications Preferences window. You don’t need to delete it from the list.

    Read the article

< Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >