Search Results

Search found 19788 results on 792 pages for 'remote host'.

Page 678/792 | < Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >

• How to detect/list rogue computers connected to a WIFI network without access to the Wifi Router interface? [migrated]

  - by JJarava

  This is what I believe to be an interesting challenge :) A relative (that leaves a bit too far to go there in person) is complaining that their WIFI/Internet network performance has gone down abysmally lately. She'd like to know if some of the neighbors are using her wifi network to access the internet but she's not too technically savvy. I know that the best way to prevent issues would be to change the Router password, but it's a bit of a PITA having to re-configure all wifi devices... and if the uninvited guest broke the password once, they can do it again... Her wifi router/internet connection is provided by the telco, and remotely managed so she can log-on to their telco account's page and remotely change the router's Wifi password, but doesn't have access to the router status page/config/etc unless she opts out of the telco's remote support and mainteinance service... So, how could she check if there are guests in the wifi with this restrictions and in the most "point and click way"? In this case I'd probably use nmap to look for other devices in the network, but I'm not sure if that's the easiest way to do it. I'm not a wifi expert, so I don't know if there are any wifi-scanning utils that can tell us who's talking to the router... Lastly, she's a Windows user as I guess that'll influence the choice of tools available Any suggestions more than welcome Regards!

  Read the article

• Rails 3 + Nginx + Passenger -- Routing index

  - by Bijan

  I have no index.html file in my public folder. My rails routes file routes this, and it works fine when I run 'rails server' on my machine. I'm trying to deploy the app. I have passenger and nginx running When I run rails server on my local machine, it works fine. But it's just trying to access static file when I try to access it on the production server. Here's my nginx conf: worker_processes 1; #pid logs/nginx.pid; events { worker_connections 1024; } http { passenger_root /usr/lib/ruby/gems/1.9.1/gems/passenger-3.0.2; passenger_ruby /usr/bin/ruby; include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; server_name mmjconsult.com; root /www/mmjs/public; access_log logs/host.access.log; passenger_enabled on; } } Thank you for any help. I really appreciate it.

  Read the article

• MySQL stopped asking for passwords

  - by BlaM

  I'm currently experiencing a weird problem with one of my MySQL database servers: It stopped asking for passwords when I try to access the database from local with the mysql command line tool. I need a valid admin username. I also still need a password for remote access (i.e. from another IP). And I need a password when I - for example - access the database from a PHP script. But when I try to access the database from local host/commandline it will let me straight in to the data with my administrative users. They (admin users) have passwords set - and as I mentioned - I still need to specify those when I try to access the data via PHP. Changing the password didn't help. Non-Administrative users need to specify their passwort, but that doesn't really help if they can get anywhere with "mysql -u root" (or another admin user account name). (System Debian Linux Lenny, MySQL 5.0.51a) Any ideas? Anything that explains this behaviour? I don't understand how this can happen.

  Read the article

• Nginx server 301 Moved permanently

  - by user145714

  When I did a curl -v http://site-wordpress.com:81 I received this result: About to connect() to site-wordpress.com port 81 (#0) Trying ip... connected Connected to site-wordpress.com (ip) port 81 (#0) GET / HTTP/1.1 User-Agent: curl/7.19.7 (x86_64-unknown-linux-gnu) libcurl/7.19.7 NSS/3.12.6.2 zlib/1.2.3 libidn/1.18 libssh2/1.2.2 Host: site-wordpress.com:81 Accept: / < HTTP/1.1 301 Moved Permanently < Server: nginx/1.2.4 < Date: Fri, 16 Nov 2012 16:28:19 GMT < Content-Type: text/html; charset=UTF-8 < Transfer-Encoding: chunked < Connection: keep-alive < X-Pingback: The URL above/xmlrpc.php < Location: The URL above Seems like this line in my fastcgi_params is causing grief. fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; If I remove this line , I get HTTP/1.1 200 OK but I get a blank page. This is my config: server { listen 81; server_name site-wordpress.com; root /var/www/html/site; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; index index.php; if (!-e $request_filename){ rewrite ^(.*)$ /index.php break; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; # port where FastCGI processes were spawned fastcgi_index index.php; include /etc/nginx/fastcgi_params; include /etc/nginx/mime.types; } location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; } } This config works with ip and port 80. But now I need to use a domain name and port 81, which doesn't work. Could someone please help. Thanks.

  Read the article

• Redmine does not return the web page

  - by m0skit0

  I migrated a Redmine installation from an Ubuntu machine to a Debian one (both 32-bits), and now for some reason, for some users it doesn't return the page but only a 200 OK message. Here is the flow (from Wireshark): GET /issues/142 HTTP/1.1 Host: debian:3000 User-Agent: Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:17.0) Gecko/20100101 Firefox/17.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Cookie: _redmine_session=BAh7DCIQX2NzcmZfdG9rZW4iMStIM1RBNTlNelZVUXlUazgrR1pUNGUvNGdEbytUZzRyMVFSUnBvNGhlSDg9Ihd0aW1lbG9nX2luZGV4X3NvcnQiEnNwZW50X29uOmRlc2MiD3Nlc3Npb25faWQiJThiMDk0MzVhOTEzYTI0MzVjOGEzYTRmNDU0NzcwMTAwIgx1c2VyX2lkaQoiFmlzc3Vlc19pbmRleF9zb3J0IgxpZDpkZXNjIg1wZXJfcGFnZWlpIgpxdWVyeXsHOg9wcm9qZWN0X2lkaQc6B2lkaQo%3D--8588c221c0642a12f396239455fb702aec14c9c9; my_wiki_session=f70ae11e1c533c86f0e039d63cf3f69c; my_wikiUserID=1; my_wikiUserName=Yasin Cache-Control: max-age=0 HTTP/1.1 200 OK Connection: Keep-Alive Date: Wed, 12 Dec 2012 16:30:16 GMT Server: WEBrick/1.3.1 (Ruby/1.8.7/2010-08-16) Content-Length: 0 As you can see, I get nothing from the server. This is mostly random because this blank page happens sometimes for some users, and for other users it almost never returns the page... I'm absolutely lost here. Any idea about what can be the cause? Thanks in advance!

  Read the article

• I have a perl script that is supposed to run indefinitely. It's being killed... how do I determine who or what kills it?

  - by John O

  I run the perl script in screen (I can log in and check debug output). Nothing in the logic of the script should be capable of killing it quite this dead. I'm one of only two people with access to the server, and the other guy swears that it isn't him (and we both have quite a bit of money riding on it continuing to run without a hitch). I have no reason to believe that some hacker has managed to get a shell or anything like that. I have very little reason to suspect the admins of the host operation (bandwidth/cpu-wise, this script is pretty lightweight). Screen continues to run, but at the end of the output of the perl script I see "Killed" and it has dropped back to a prompt. How do I go about testing what is whacking the damn thing? I've checked crontab, nothing in there that would kill random/non-random processes. Nothing in any of the log files gives any hint. It will run from 2 to 8 hours, it would seem (and on my mac at home, it will run well over 24 hours without a problem). The server is running Ubuntu version something or other, I can look that up if it matters.

  Read the article

• Uninstalled server 2008 now router won't handle DHCP

  - by john

  My set up is this. server behind router, router has a server and switch connected to it with multiple computers. router used to serve DHCP and DNS, a couple of days ago installed AD, DNS and DHCP on the server, and the server gave out IP's. For various reasons we had to uninstall the domain on our server. I removed AD, DHCP and DNS from the roles and set the router back to serving DHCP and DNS. Now I can't get computers on the network. I reset my router back to factory defaults, and if I plug a computer directly into the router I can get a IP address, but all the computers behind the switch can't get an IP address and can't see the router. All my computers say unidentified network, and if I ping the router it says host is unreachable. On the other hand, my wireless devices are just fine and connect no problem. But for desktops, ipconfig /release doesn't release anything and /renew can't find a server to renew on. My router log shows several FIN scans but they are from innocuous websites (google, netgear) and it shows a couple of smurf attacks but they are all from my external IP. Any ideas? the server isn't even connected to the route right now, and all the computers are set for dynamic IP addresses.. I don't know what else to try? Any help?

  Read the article

• Is it possible to record a screen-video from a VNC server?

  - by nikie

  I have a computer that's running VNC server. I would like to record a video of what's going on on this computer, if possible without installing additional software on that computer. Is there a program that can connect to the VNC server port and instead of displaying the screen save it to an (e.g. AVI) video file? Background: One of our customers sometimes has problems with the software he bought from us when he's performing a complex procedure. To help him, we offered that someone (a service technician or programmer) watches what he's doing during that procedure to find out if he's doing something wrong or if there's a bug in the software. Currently, this is done live via VNC. That has a few disadvantages: The service technician has to be in the office at the time. As the customers are in different time zones, that can be in the middle of the night. If the service technician forgets something or doesn't notice something, it's lost. There's no way to see what happened again. Only a single computer can be watched by one service technician at a time. I know I could install normal screen-grab software on the computer, but we're talking about an embedded system with limited RAM, CPU, HDD space, so installing something new is not an easy decision. And VNC is already there. I could of course open a VNC client on some office PC and capture that PC's screen, but I can only record one remote computer that way. I often have to watch up to 8 screens in parallel. (And I don't think that screen-grabbing VNC would improve image quality, either.)

  Read the article

• Any ideas why Ettercap filters aren't seeing packet data?

  - by Bryan

  I'm using an Ettercap filter to detect a query response coming back from a particular service on a remote machine. When I see a response from the service, I'm searching through the data in the packet to see if an offset is a specific value, and if so I'm changing the value at another offset. Trouble is, when I try this on a new virtual machine I built my Ettercap filter's no longer getting any data in the DATA.data variable available to it. if(ip.proto == TCP && tcp.src == 17867) { msg("Response seen!\n"); if(DATA.data + 2 == "\0x01") { msg("Flag detected!\n"); DATA.data + 5 = 0x09; } } The filter's getting applied to the traffic because "Response seen!" messages get printed out by Ettercap. However, "Flag detected!" messages do not. I think DATA.data is indeed empty because if I change my second "if" statement to check for DATA.data == "" then the "Flag detected!" message gets printed. Any ideas why this may be happening?! Also, if this is the wrong site to be asking questions like this, please let me know. I wasn't sure if it fit better here or somewhere like superuser or serverfault. By the way, this is a cross-post from StackOverflow... I should have posted on this forum instead I think. :)

  Read the article

• ssh hangs on "Last login" line

  - by Pavel H

  This happened for the first time three days ago - I ssh to the server, authenticate using a password, get the welcome message but it remains hanging on the "Last login:..." line. The command line doesn't show and the server doesn't react to my input. Other services on the server keep working ok (apache, tomcat, database, ..). The box has an out-of-band management using which I was able to restart it. After the restart the ssh worked ok again and I didn't find anything suspicious in the logs. Three days later the same problem occurs on this box again, and newly on yet another server in the cluster - 100% same symptoms. Both servers have about 2 month old installation of Debian Squeeze (6.0.2) and the problem never occurred before despite frequent ssh-ing, so it should not be a problem of settings. We haven't been installing anything new for quite some time now. I also made sure there is enough disk space on both servers. Since it started to happen all of a sudden on two servers at about the same time, I suspect some bug may have been introduced via Debian updates, yet I haven't been able to find anyone with the same problem. Most similar issues I have found: ssh freezes at the "Last Login Line" - in our case everything worked fine until recently, so nothing related to settings should be our problem. Diskspace checked, I couldn't check the memory but I would expect something would be in the logs if the system had been running out of it. Remote Fedora system unresponsive, odd but consistent behavior when trying to log in - problem with high load on the server; unlike in this case, nothing changes even if I wait for 10+ minutes

  Read the article

• Windows 7 SSH file server

  - by Siriss

  Hello all- I have looked at the other posts, but have not quite found an answer I have a question about windows file sharing over SSH. I have copssh installed and it is working for Remote desktop connections. I have port 22 forwarded on my router etc. I connect from a Mac or Putty with this address: ssh -l copsshusername 3391:localhost:3389 [external ip] That works fine. I would like to configure Windows 7 to allow my ssh account that I use to login, access to certain shared folders. I have documents and videos and things that I would like to be able to download externally. I have done this before on Linux and a long time ago on XP, but I cannot figure out what I am missing on Windows 7. There is a designated SSH user that copssh uses to run the service and that I use to to login as. I have googled and googled and have not found a solution that does everything I need that is why I am turning here for ideas. I hope I am explaining this correctly. Thank you very much for your help!

  Read the article

• 100% uptime for a web application

  - by Chris Lively

  We received an interesting "requirement" from a client today. They want 100% uptime with off-site failover on a web application. From our web application's viewpoint, this isn't an issue. It was designed to be able to scale out across multiple database servers, etc. However, from a networking issue I just can't seem to figure out how to make it work. In a nutshell, the application will live on servers within the client's network. It is accessed by both internal and external people. They want us to maintain an off-site copy of the system that in the event of a serious failure at their premises would immediately pick up and take over. Now we know there is absolutely no way to resolve it for internal people (carrier pigeon?), but they want the external users to not even notice. Quite frankly, I haven't the foggiest idea of how this might be possible. It seems that if they lose Internet connectivity then we would have to do a DNS change to forward traffic to the external machines... Which, of course, takes time. Ideas? UPDATE I had a discussion with the client today and they clarified on the issue. They stuck by the 100% number, saying the application should stay active even in the event of a flood. However, that requirement only kicks in if we host it for them. They said they would handle the uptime requirement if the application lives entirely on their servers. You can guess my response.

  Read the article

• Hyper-v and sql server connections for web apps

  - by Rick Ratayczak

  I have a physical machine running win8, and two VMs in hyper-v client: 1 web server, 1 sql server. The web server works fantastic. The sql is the one that is giving me the problem. I can connect to it with server explorer in visual studio or management studio just fine, and it's blazing fast. The problem happens when I use the same connection string I am using in visual studio server explorer in the web.config for an app. data source=VMSQL1;initial catalog=OtherShell;persist security info=True;user id=OtherShell;password=****;network library=dbmssocn;MultipleActiveResultSets=True;App=EntityFramework I made sure it was also using tcp-ip, but it doesn't connect with or without the network library part of the connection string. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) This is driving my batty for the last two days, any ideas? It fails from the web vm too, but works in management studio with the same connection string.

  Read the article

• RAID degraded on Ubuntu server

  - by reano

  We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

  Read the article

• Configuring nginx to check for hard files in only a few directories,

  - by Evan Carroll

  For a node.js project I'm doing, I have a tree like this. +-- public ¦   +-- components ¦   +-- css ¦   +-- img +-- routes +-- views Essentially, I have the root to be set to public. I want all requests destined to /components/ /css/ /img/ To check to see if their appropriate destinations exist on disk. However, I don't want requests to other directories to even run an IO operation, /foo/asdf /bar /baz/index.html None of those should result in the disk being touched. I have a stansa that does the proxy to node.js, location @proxy { internal; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://localhost:3030; proxy_redirect off; } I just would like to know how to arrange this. My problem would be easily solved if try_files took a single argument, but it always wants a file first. location /components/ { try_files $uri, @proxy } location /css/ { try_files $uri, @proxy } location /img/ { try_files $uri, @proxy } However, there is nothing that I can find that will give me, location / { try_files @proxy } How do I get the effect I want?

  Read the article

• Error authenticating git repository with Redmine

  - by woni

  I've setup Redmine 2.1 on my Debian Squeeze server following this Tutorial HowTo configure Redmine for advanced git integration (I tried to use the grack path). Redmine server is running properly, but I have a problem granting users access to git repositories. When I try to clone a repository it says: error: The requested URL returned error: 500 while accessing The apache error.log shows this entry: [Fri Sep 28 15:50:56 2012] [crit] [client xx.xx.xx.xx] configuration error: couldn't check user. Check your authn provider!: /repo.git/info/refs It also asks me for user and password when cloning, but it shouldn't if I understand the tutorial right. I'm using the Redmine authentication module: <VirtualHost *:80> ServerName my.server.at DocumentRoot "/var/www/my.server.at/public" PerlLoadModule Apache::Redmine <Directory "/var/www/my.server.at/public"> Options None AllowOverride None Order allow,deny Allow from all </Directory> SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER" SetEnv GIT_PROJECT_ROOT /var/git/my.server.at/ SetEnv GIT_HTTP_EXPORT_ALL ScriptAlias /git/ /usr/lib/git-core/git-http-backend <Location /> Order allow,deny Allow from all AuthType Basic AuthName Git Require valid-user AuthBasicAuthoritative Off AuthUserFile /dev/null AuthGroupFile /dev/null PerlAccessHandler Apache::Authn::Redmine::access_handler PerlAuthenHandler Apache::Authn::Redmine::authen_handler RedmineDSN "DBI:mysql:database=redmine;host=localhost" RedmineDbUser "user" RedmineDbPass "password" RedmineGitSmartHttp yes </Location> </VirtualHost> Can someone help me please and explain the error and what I can do to solve my problem?

  Read the article

• How to handle OpenVPN client as a service, when the laptop is physically on the network already?

  - by James

  The Setup I've gotten OpenVPN working on our Windows XP laptops. Users are limited, so I went ahead and set OpenVPN client to run as a service, which is great anyway because that means they are on the VPN before logging in, so login scripts work, plus we can do remote support even if the user can not log in (such as connecting via VNC or resetting passwords). It is also configured to send all traffic over the tunnel, so when, for example, they browse the internet it is just like browsing from our corporate network. The Qestion(s) So, I'm wondering how does the OpenVPN client act when the computer is already physically on the same network as the OpenVPN server? Right now, the client is configured to connect the the public dns name which will resolve to the public ip address which will NOT get reflected back to the OpenVPN server, so it is affectively blocked from connecting to the OpenVPN server while on the network. Is that a good thing? Or will it constantly try to connect, using up system resources and network resources? We will likely have hundreds of laptops regularly on the physical network with this, so it could contribute to a lot of unnecessary network chatter. Alternatively Would it be better to have the firewall reflect the port back to the OpenVPN server and let it connect? Or have our internal dns resolve the name to the private ip and allow them to connect directly? Would traffic then go over the vpn connection (which I do not want, when already on the physical network)? Or is it possible to tell it to ignore the connection when the client and server are already on the same network? TLDR What's a sane way of handling OpenVPN client running as an always-on service when the client and server will often be on the same network?

  Read the article

• Active Directory: Determining DN or OU from log in credentials [closed]

  - by Christopher Broome

  I'm updating a PHP login process to leverage active directory on a Windows server. The logging in process seems pretty straight forward via a "ldap_bind", but I also want to pull some profile information from the AD server (first name, last name, etc...) which seems to require a robust distinguished name (DN). When on the windows server I can grab this via 'dsquery user' on the command prompt, but is there a way to get the same value from just the user's login credentials in PHP? I want to avoid getting a list of hundreds of DNs when on-boarding clients and associating each with one of our users, so any means to programmatically determine this would be preferential. Otherwise, I'll know the domain and host for the request so I can at least set the DC portions of the DN, but the organizational units (OU) seem to be pretty important for querying data. If I can find some of the root level OU values associated with the user I can do a ldap_search and crawl. I browsed through the existing questions and found some similar but nothing that really addressed this, so my apologies if the obvious answer is out there. Thanks for the help.

  Read the article

• AA doesn't work due to monitor?

  - by MikeQ

  I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

  Read the article

• backup an existing linux server to a virtualbox virtual machine

  - by user146526

  I have some servers and VPSs to many companies across the world. I want to back them up locally. I have some backup solutions enabled to remote hosts, but I want to have a local backup on a computer at home. What I am thinking is: 1) Create a virtualbox virtual machine, install the same version linux as the server. 2) Use rsync to backup the server to the local virtualbox machine. (something like rsync -av --delete --progress --exclude '/dev/' --exclude '/proc/' root@server_ip:// / ) 3) Repeat the command every few days update files. 4) In case of a hard disk failure, or any other bad event, reverse the rsync command and get the files back and continue my bussiness. I tried it with 2 openvz VPS, the one was a backup of the other. I also tried to transfer normal linux server host to openvz machine and it worked great. That way looks pretty clean and easy to me, this is the kind of solution I am looking for. However I need to be sure that this will work if I am going to do it. The question is, will that work ok ? Does anyone see any problem with that ? Do you have any other suggestions ? Thanks

  Read the article

• PST backup with Volume Shadow Copy Service

  - by NoMadMan

  I was asked to implement the task of backing up 35 PST files ranging from 800Mb to 2000Mb. Windows XP and Windows 2000 workstations are assigned to the users and we have a Windows 2000 domain controller we use to back up files on 3x 500Gb external hard drives. I found several methods from applications to scripts. Local or remote applications would be my last resort. I came across this script based on Volume Shadow Copy Service. CopyWithVss I wanted to know if there would be a problem if the path had spaces. Would mounting the destination path of each PST folder with a drive letter be more practical? My concern with mounting option is that i would eventually run out of letters since I have 35 and possibly more workstations to back up. Lastly, can someone give me an example of CopyWithVss if it were run on a production network? The script is a bit cryptic even after reading several times. Where in the script do I enter the source and the destination? I'm a Mac user so please excuse my ignorance with Windows platform.

  Read the article

• What may the reason of slowness be (see details in message body)?

  - by Ivan

  I've got a really weird situation I'm beating to solve. A performance problem which looks really like an empty waiting sequence set in code (while it probably isn't so). I've got a pretty powerful dedicated server (10 GB RAM, eight Xeon cores, etc) running Ubuntu 10.04 with all the functionality services (except OpenVPN server used to provide secure access to clients) deployed in separate VirtualBox (vboxheadless) machines (one for the company e-mail server, one for web server and one for accounting/crm server (Firebird + proprietary app server working with Delphi-made clients)). CPU load (as "top" says) is almost always near zero. Host system RAM is close to 100% usage but not overloaded (as very little swapping gets used, and freed (by stopping one of VMs) memory doesn't get reused any quickly). Approximately 50% of guests RAM is used. iostat usually shows near zero %util. Network bandwidth seems to be underused. But the accounting/crm client (a Win32 Delphi application run on WinXP machines) software works hell-slow with this server (and works much better using an inside-LAN Windows server). I just can't imagine what can make it be slow if there are so plenty of CPU, RAM, HDD and bandwidth resources available on clients and on the server even in their hardest moments. Saying bandwidth is underused I not only know that clients and the server are connected to the Internet with a bigger channels than really used (which leaves the a chance they may have a bottleneck of a sort on the route between them), I've tested bandwidth between clients and the server by copying files among them.

  Read the article

• nginx with fail2ban and mod_security

  - by Mahesh

  I forgot to update my fail2ban config for nginx. I just moved to nginx from apache. Today, I got a lot of cals from a single IP. IP tried to access login pages with post and get methods IP tried to use nginx as a proxy (GET http:/...) IP searched images, js, css folders IP tried to inject -d url_allow_fopen =1 and something similar. Most of the calls ended with 404. http { limit_req_zone $binary_remote_addr zone=app:10m rate=5r/s; ... server { ... location / { limit_req zone=app burst=50; } I got approximately 50 requests from that ip for a second. So i updated my nginx like the above. Will it avoid too many connections per second now? I have updated my fail2ban jail.local to support nginx. I am confused with the nginx-noscript.conf [Definition] failregex = ^<HOST> -.*GET.*(\.php|\.asp|\.exe|\.pl|\.cgi|\scgi) ignoreregex = I am serving php with nginx. I checked apache's noscript.conf and which has .php extension on it too. I tested this above settings before restarting fail2ban and got thousands of ips matched. I removed php and nothing matched. Do i need .php| in nginx-noscript.conf? Using mod_security and fail2ban together bring any problem? When i was searching today, i came to know mod_security is available for nginx too. So i am planning to use it too.

  Read the article

• Why is my global security group being filtered out of my logon token?

  - by Jay Michaud

  While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

  Read the article

• How to distribute multiple executions of an app across many machines

  - by Salec

  I've got a simulation app (64-bit windows) that runs without any user interaction. This app gathers information and pushes it to a remote MS SQL Server. What I'd like to do is execute this simulation as many times as I can on multiple machines after our nightly build has finished and it has passed the test suite. If possible I'd love to have the ability to configure it to stop after x total runs or if the entire batch has taken over y hours. I've tried using Visual Studio's built in test framework since we already have a test lab set up with multiple agents. I created a single unit test that simply runs the simulation then I created an ordered test and added that single test multiple times (from what I gather, this is the only way to execute the same unit test more than once). I found that ordered tests are only run on a single agent and not distributed which is very limiting. We use TeamCity to perform our nightly builds and I suspect it's possible to implement this on top of that, but I'm fairly new to TeamCity. We also have Jenkins and Bamboo available and I'm open to any other software that would get the job done presuming it runs on a 64-bit Windows OS. Any suggestions?

  Read the article

< Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >