Search Results

Search found 19915 results on 797 pages for 'software patent'.

Page 678/797 | < Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >

• unable to ping hostname, but \\hostname\\c$ works!?

  - by ciscokid

  I'm having a strange issue on my initial lab setup. Situation: Host with OS Server 2008 R2 64bit, on this host a Virtual Machine in Hyper-V with OS Server 2008 SP1 32bit. The virtual machine has a fixed ip, and is referring to itself for the preferred DNS Server (dns server role has been installed). The host has tcp/ip set to automatic (so automatic ip from router, and dns/gateway = router). Both are able to ping each other on IP address (same ip range). Both are NOT able to ping each other on hostname (sounds logic because virtual machine dns server does not yet have a dns record for the hostmachine). But here's the strange thing: I am able to set up a working network mapping on the Virtual Machine to the host: \hostname\c$. The first thing I thougt was 'something' is blocking the ping request, so I completely disabled Windows Firewall on both Virtual Machine and host. Still pinging on hostname in both ways didn't work, yet I am able to access the network mapping on hostname. There is no extra software installed on both systems (clean windows server 2008).Can someone tell me what is causing this? I always thought: ping on IP address works = network mapping on IP address works. Pinging on hostname doesn't work = network mapping on hostname doesn't work neither. Where am I wrong? Looking forward to your advice!

  Read the article

• Clustering/load balancing for cluster unaware applications

  - by AaronLS

  Forgive me if I use any of these terms incorrectly. I am wondering if there is any kind of software that would allow my two "join" two computers together such that a cluster unaware application could utilize their combined computing resources? By "cluster unaware" I mean an application that isn't designed to share work across multiple services. My understanding is that clustering is enabled by the specific application by it's architecture, such that messaging with multiple instances of the application coordinate the sharing of work. Instead I am looking for something that enables clustering at the OS or virtualization level, so that any application could essentially be clustered. Failing that, I am also wondering about the following scenario: We have 3 different applications we will call A, B, and C. We have 2 single core computers. At any given time lets say that any combination of those applications will be CPU intensive. In cases where only 2 of those apps are very active, have one of them moved over to a different server. In a nutshell, some sort of dynamic automatic shuffling of the application's load. I have heard of virtual machines that can be migrated across physical machines while live, but I am wondering if this can be done automatically in response to an application's or VM's CPU activity?

  Read the article

• Erase just the free space on my hard drive

  - by Patriot

  I'm about to give away an older computer with just the Windows XP operating system intact and all other programs uninstalled. However, upon peeking at the "free space" with software called "Recuva", I notice lots of deleted things that could be recoverable. Some of these include sensitive data files, pdfs, and other personal items that I would not want retrieved. I ran a program called "Eraser" to try and overwrite that data, but it failed to do an adequate job. I also tried to do the job with "Glary Utilities" but it failed too. Short of installing a new, very cheap hard drive and re-installing the bare bones operating system, I'm out of ideas. EDIT - WOW!!! I was not really expecting this many GREAT ideas. My next question is this. If I go the DBAN route and truely wipe the hard drive, then restore my disc image (I use Acronis True Image) will it also restore the free space data? Does imaging just copy readable data? I have an old image of when the OS was first installed.

  Read the article

• How to prevent nginx from locking files on mounted samba partition in Centos 6

  - by Bruce Kirkpatrick

  I'm using nginx 1.3.8 inside a centos 6.3 virtualbox 4.2.4 virtual machine. The system is running the latest software available via yum update. The host OS is windows 7. The site files nginx is serving are on mounted samba partition, which is a folder on the host Windows system. I.e., inside linux, nginx paths are referring to /home/vhosts and this is mounted from D:\vhosts\ on windows. The samba partition is mounted as root with 777 privileges. /etc/fstab looks like this, but with real ip, username, password: //hostip/vhosts /home/vhosts cifs username=username,password=SECRETPASSWORD,uid=root,gid=root,file_mode=0777,dir_mode=0777,rw,_netdev 0 0 I.e. linux/nginx reads from the windows share, and not the opposite. in /etc/samba/smb.conf, I have tried to disable all samba locking features, but it seems to have no effect even after rebooting the virtual machine. locking=no share modes=no oplocks = no level2 oplocks = no kernel oplocks =no I'm receiving "Access is denied" errors in Windows or linux when attempting to overwrite the javascript file in windows that has been accessed at least once with nginx. If I run "service nginx reload", the lock is removed and I'm able to save the file. That's why I think it is nginx causing the lock. The same problem occurs with directories. However, that may be a different issue not related to the use of samba. I'm using samba so that I can manage the source code outside of the virtual machine. Also note that after I run "service nginx reload", the file I'm editing is actually automatically deleted from the windows host. SOLVED: I just reviewed my nginx.conf file. It appears the "open_file_cache" feature is what is causing the lock and deleted files. When I set this option to open_file_cache off;, My problem is resolved. I will repost as the answer when it allows me to do so.

  Read the article

• How to Change the Kerberos Default Ticket Lifetime

  - by user40497

  Our KDC servers are running either Ubuntu Dapper (2.6.15-28) or Hardy (2.6.24-19). The Kerberos software is the MIT implementation of Kerberos 5. By default, a Kerberos ticket lasts for 10 hours. However, we'd like to increase it a bit (e.g. 14 hours) to suit our needs better. I had done the following but the ticket lifetime still stays at 10 hours: 1) On all the KDC servers, set the following parameter under [realms] in /etc/krb5kdc/kdc.conf and restarted the KDC daemon: max_life = 14h 0m 0s 2) Via "kadmin", changed the "maxlife" for a test principal via "modprinc -maxlife 14hours ". "getprinc " shows that the maximum ticket life is indeed 14 hours: Maximum ticket life: 0 days 14:00:00 3) On a Kerberos client machine, set the following parameters under [libdefaults], [realms], [domain_realm], and [login] in /etc/krb5.conf (everywhere basically since nothing I tried had worked): ticket_lifetime = 13hrs default_lifetime = 13hrs With the above settings, I suppose that the ticket lifetime would be capped at 13 hours. When I do "k5start -l 14h -t ", I see that the end time for the "renew until" line is now 14 hours from the starting time: Valid starting Expires Service principal 04/13/10 16:42:05 04/14/10 02:42:05 krbtgt/@ renew until 04/14/10 06:42:03 "-l 13h" would make the end time in the "renew until" line 13 hours after the starting time. However, the ticket still expires in 10 hours (04/13 16:42:05 - 014/14 02:42:05). Am I not changing the right configuration file(s)/parameter(s), not specifying the right option when obtaining a Kerberos ticket, or something else? Any feedback is greatly appreciated! Thank you!

  Read the article

• Huh? JDK not found? (on Windows 7 64-bit)

  - by Android Eve

  I am setting up a development environment for the latest Android 2.3 on a fresh install of Windows 7 64-bit. I first installed the 64-bit JDK 6 (jdk-6u23-windows-x64.exe). Then, I installed 64-bit Eclipse Classic 3.6 (eclipse-SDK-3.6.1-win32-x86_64.zip). Then, I proceed to install the Android SDK Starter Package: installer_r08-windows.exe. But... upon start it says: "Java SE Development Kit (JDK) not found." Why? I just installed it. Is this a mismatch between 32-bit and 64-bit? How do I solve this? Update (1): I tried setting the %JAVA_HOME% environment variable, as well as setting the Installed JREs in Eclipse, as suggested below. None of these solved the problem. It appears that I am not the only experiencing the problem, as this thread suggests: http://stackoverflow.com/questions/1919340/android-sdk-setup-under-windows-7-pro-64-bit I wonder whether there is a 64-bit version of the Android SDK. Update (2): I used the zip version instead (android-sdk_r08-windows.zip), ran android.bat, updated all SDK packages, and installed the ADT plugin (8.0.1), not before having to check: 'Contact all update sites during install to find required software'. We'll see how this goes... Update (3): It worked! (going to accept @bubu's answer shortly) -- but why doesn't the emulator include the HelloAndroid app when I run it (Ctrl+F11) from Eclipse?

  Read the article

• Error 53 - The network path was not found.

  - by Jack

  I have a machine in my Active Directory Domain that I can no longer "net view" from other machines in the domain. This is a Windows XP Pro machine. It is hosting a VMWare virtual of my Domain Controller. If I attempt to net view [machine name] I get system error 53, The network path was not found. This is not a DNS issue, the same thing happens with the machine's IP. I don't think it's a firewall issue, I turned the firewall off on this machine. As I mentioned, it has worked in the past, and then stopped for no reason that I can see. I (intentionally) didn't change the software. I CAN get to the VMs hosted on this machine, can connect to their shares, net view them, etc. All other machines can see each other. In fact, the problem machine can see other machines and access their shares just fine. I tried removing the machine from the domain and re-adding it. I tried deleting the shares and recreating them. Not sure how to troubleshoot this any further. Any ideas?

  Read the article

• Windows Media Sharing not 'always' being detected by PS3

  - by Ahmad

  I'm having a weird problem with Windows Media Sharing on Windows 7 .. I have the following hardware in my network: PC 1 --- My main PC --- runs Windows 7 Ultimate x64 PC 2 --- My backup PC --- runs Windows 7 Ultimate x32 PS3 PC 1 is my main PC which has all my data/media on it .. PC 2 is a backup PC I have, but I use it like once in 2 months .. It has nothing installed on it apart from some very very basic software ... Problem is, my PS3 always sees the media sharing service coming from PC 2, but it never sees the media sharing service coming from PC 1 initially .. Both PC 1 and PC 2 have the same media sharing configuration (All everything on all devices on all networks) ... But when I restart both PCs, the PS3 will only detect PC 2's media sharing service, not PC1 .... However here's the twist .. When PC 1 is restarted, and if I view my 'Network' on PC 2, I do see PC 1's Media Sharing Service, and I'm able to play from it too on PC 2 .. To get my PS3 to also see PC 1's media sharing service, I have to do either of the following 2 things: 1) Play something from PC 1's media sharing service on PC 2 ... The PS3 will then magically also detect PC 1's media sharing service .. 2) Go into the Services area on PC 1 and restart the 'Windows Media Player Network Sharing Service' ... After this, the PS3 also instantly starts to see PC 1's media sharing service .. Since my PS3 is like a month old and is properly detecting PC 1's media sharing service, I think the problem is somewhere in the configuration of PC 1's media sharing service ... Also, on PC 1 I have Norton Internet Security 2012 installed, but I've disabled it completely, and have also disabled Windows Firewall (from PC 1 only) .. Can someone shed some light onto this ?

  Read the article

• What would keep a Microsoft Word AutoNew() macro from running?

  - by Chris Nelson

  I'm using Microsoft Office 2003 and creating a bunch of template documents to standardize some tasks. I know it's standard practice to put the templates in an certain place Office expects to find them but that won't work for me. What I want is to have "My Template Foo.dot" and "My Template Bar.dot", etc. in the "My Foo Bar Stuff" on a shared drive and users will double click on the template to create a new Foo or Bar. What's I'd really like is for the user to double click on the Foo template and be prompted for a couple of items related to their task (e.g., a project number) and have a script in the template change the name that Save will default to something like "Foo for Project 1234.doc". I asked on Google Groups and got an answer that worked....for a while. Then my AutoNew macro stopped kicking in when I created a new document by double clicking on the template. I have no idea why or how to debug it. I'm a software engineering with 25+ years of experience but a complete Office automation noob. Specific solutions and pointers to "this is how to automate Word" FAQs are welcome. Thanks.

  Read the article

• Mac OS X L2TP VPN won't connect

  - by smokris

  I'm running Mac OS X Server 10.6, providing an L2TP VPN service. The VPN works just fine when connecting from all computers except one --- this one computer stays at the "Connecting..." stage for a while, then says "The L2TP-VPN server did not respond". In the console, I see this: 6/7/10 10:48:07 AM pppd[341] pppd 2.4.2 (Apple version 412.0.10) started by jdoe, uid 503 6/7/10 10:48:07 AM pppd[341] L2TP connecting to server 'foo.bar.baz.edu' (256.256.256.256)... 6/7/10 10:48:07 AM pppd[341] IPSec connection started 6/7/10 10:48:07 AM racoon[342] Connecting. 6/7/10 10:48:07 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 1). 6/7/10 10:48:08 AM racoon[342] IKE Packet: receive success. (Initiator, Main-Mode message 2). 6/7/10 10:48:08 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 3). 6/7/10 10:48:08 AM racoon[342] IKE Packet: receive success. (Initiator, Main-Mode message 4). 6/7/10 10:48:08 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 5). 6/7/10 10:48:11 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). 6/7/10 10:48:14 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). 6/7/10 10:48:17 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). ...and the "retransmit" messages continue until the error message pops up. So far I've unsuccessfully tried: rebooting deleting the VPN profile and recreating it verifying the client's internet connection (it is able to reach the VPN server) connecting through several different networks (in case a router was blocking VPN packets) disabling the Mac OS X Firewall on the client making sure that the VPN settings exactly match those of other working computers running software update (the client is on 10.6.3) Any ideas?

  Read the article

• Apple Service Diagnostic application on USB key?

  - by Matt 'Trouble' Esse

  I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

  Read the article

• Data recovery on a corrupted 3TB disk

  - by Mark K Cowan

  Short version I probably need software to run a deep-scan recovery (ideally on Linux) to find files on NTFS filesystem. The file data is intact, but the references are no longer present. Analogous to recovering data from a "quick-formatted" partition. Hopefully there is a smarter way available than deep-scan, one which would recover filenames and possibly paths. Long version I have a 3TB disk containing a load of backups. Windows 7 SP1 refused to detect the disk when plugged in directly via SATA, so I put it on a USB/SATA adaptor which seemed to work at first. The SATA/USB adaptor probably does not support disks over 2.2TB though. Windows first asked me if I wanted to 'format' the disk, then later showed me most of the contents but some folder were inaccessible. I stupidly decided to run a CHKDSK on my backup disk, which made the folders accessible but also left them empty. I connected this disk via SATA to my main PC (Arch Linux). I tried: testdisk ntfsundelete ntfsfix --no-action (to look for diagnostically relevant faults, disk was "OK" though) to no avail as the files references in the tables had presumably been zeroed out by CHKDSK, rather than using a typical journal'd deletion). If it is useful at all, a majority of the files that I want to recover are JPEG, Photoshop PSD, and MPEG-3/MPEG-4/AVI/MKV files. If worst comes to worst, I'll just design my own sector scanner and use some simple heuristic-driven analysis to recover raw binary blocks of data from the disk which appears to match the structures of the above file types. I am unfamiliar with the exact workings of NTFS but used to be proficient at recovering FAT32 systems with just a hex-editor, so I can provide any useful diagnostic information if you let me know how to find it! My priorities in ascending order of importance for choosing the accepted answer: Restores directory structure Recovers many filenames in addition to the file data Is free / very cheap Runs on Linux Recovers a majority of file data The last point is the most important, but the more of the higher points you match the more rep you'll probably get :)

  Read the article

• Acer Aspire One -- strange battery problem, charges only up to ~90%

  - by houbysoft

  I have this strange problem on the acer aspire one d250. It happened already once before, stayed for about two weeks, and then "fixed itself". The problem is as follows: the battery can't seem to get fully charged; ie the indicator is stuck at about 90% (it's probably not a software problem -- I have ArchLinux and Windows 7 installed and both report exactly the same) and it never passes that value, but it still shows the status as "charging" (I tried everything I could think of -- leaving it charging for extremely long amounts of time, doing a few complete charge-recharge cycles, removing/reinserting the battery, cleaning the connectors, even updating the BIOS, etc., and nothing helped). Also, when it is getting charged, it charges pretty fast until about 70% and then progresses extremely slowly. The battery holds the charge that appears on the battery indicator normally. Just can't get the battery to charge fully -- I can't get it past the 90%. At first I thought this would be a simple battery failure (even if the computer is not that old, about 6-7 months), but as I mentioned it happened once before, and then one day it fixed itself. I tried contacting Acer about this, but the support was not helpful, completely stupid, it seemed like they used canned responses, the usual. Any thoughts on how to fix this?

  Read the article

• "Run As Administrator" on program right click failing and not launching program

  - by GONeale

  This problem lies within a relatively fresh x64 Windows 7 install ~4 weeks, but is also a problem I have seen on Windows Vista machines (x86 versions). Since the other day, any programs attempted to be launched via right clicking on a shortcut (.lnk)'s context menu and pressing - "Run As Administrator" for instance, in the Quick Launch/Jump List in Windows 7 has failed, screen has not dimmed, no UAC popup. In fact the program does not even load. There is no way around this unless I use the shortcut version from "All Programs" which appears to work, very strange? I have performed no major software installs, nothing out of the ordinary. Has anybody encountered this or know what would be causing it? Here's an example of somebody else experiencing this problem in Vista with no solution: http://www.vistax64.com/vista-general/131918-strange-run-administrator-problem.html and I believe this problem is related, I also cannot right click - "Manage" on my computer): http://windows7forums.com/windows-7-support/5501-run-administrator-broken.html I am running the latest version of Avira AntiVir Virus Scanner and pretty concious of what I download, I don't think it is a virus, nor do I believe it is due to the RC Version of Windows 7, because I have seen the problem across multiple Operating Systems versions. Thanks guys.

  Read the article

• How to deal with lots of brackets in a formula?

  - by wenlibin02

  Say, I have a formula like this (in LaTeX or Maple or other text system): Result: ((6*(k2+k3))*A123*k2*k3*(A12*A13*k2^2-2*A12*A13*k2*k3+A12*A13*k3^2-A123*k2^2-2*A123*k2*k3-A123*k3^2)*(exp(-k3*(k3^2*t-x)))^2+6*A12*(-k3+k2)*k2*k3*(A12*A13*k2^2-2*A12*A13*k2*k3+A12*A13*k3^2-A123*k2^2-2*A123*k2*k3-A123*k3^2)*exp(-k3*(k3^2*t-x)))*(exp(-k2*(k2^2*t-x)))^2+(-(6*(-k3+k2))*A13*k2*k3*(A12*A13*k2^2-2*A12*A13*k2*k3+A12*A13*k3^2-A123*k2^2-2*A123*k2*k3-A123*k3^2)*(exp(-k3*(k3^2*t-x)))^2-(6*(k2+k3))*k2*k3*(A12*A13*k2^2-2*A12*A13*k2*k3+A12*A13*k3^2-A123*k2^2-2*A123*k2*k3-A123*k3^2)*exp(-k3*(k3^2*t-x)))*exp(-k2*(k2^2*t-x)) Note: the above formula is only one part of the result of a maple calculation, I just can't break them up because there are so many many terms. Apparently, It's very hard to read. What I want to do is to fold the matched brackets level by level. If all the brackets are folded, I can find out clearly how many terms there are. Then I can analyze from the top level to the details of every term. But I just don't know how to realize that. Maybe there are some existed software which can visualize this kind of complex formula. Any idea? P.S. I use Linux system. The open source alternatives are better.

  Read the article

• Error message: do not have authority to access this function

  - by Ross

  Hi. I just reinstalled Windows on my computer after getting a virus. I worked with it for a while and everything worked as it should. I then used a backup of the computer that I had made a week or so earlier and copied the backup over my user folder. (That is, I took the folder named "Joe" from the backup drive and copied-replaced the whole thing over the folder named "Joe" on the new Windows install.) To do this I had to work from an Ubuntu live CD because some of the files were in use. Now the problem: After I did this copying my computer says that I have no authority. Anytime I try to access anything that is part of the operating system (Explorer, Personalize, Control Panel, etc) I get an error message that says I don't have the authority to do this. I am able to access things that aren't part of the OS: Chrome, Firefox, my accounting software, Rockbox, but nothing that is part of the OS. I only copied over the User file, so I didn't mess with the registry or anything, so I have no idea why this should be. Does anyone out in cyberspace have any idea? Thank you.

  Read the article

• Poor gaming performance with hyper-v installed in windows 8

  - by SnowCrash

  I am getting very poor gaming performance on my Windows 8 host OS with Hyper-V installed but no guest machines running. For example World of Tanks reports 60-70 FPS without Hyper-V installed and 4-14 FPS with it installed. A similar, dramatic, hit is observed in several other games so the issue is not WoT specific. To make the point clear, I am not trying to run games in a virtual machine. I don't even have a VM running while observing this effect. I simply have the Hyper-V feature installed. My system specs: AMD Phenom II 965 (3.4 GHz) AMD Radeon 6950 2GB (XFX Double D HD-695X-CDFC) 16GB DDR3 1333 AMD 790GX chipset Mainboard (Gigabyte GA-MA790GPT-UD3H) I have tried every AMD driver from 12.8 to the current 12.11beta8, virtualization is enabled in the BIOS settings, the onboard 3300HD video device is disabled in BIOS and I have read the MSDN blog entry here regarding a similar issue in Server 2008 that was resolved in 2008 R2 (and hopefully not regressed in Win 8). I'd like to be able to use Hyper-V for development and testing at home (I am a sysadmin/software developer professionally). If, however, I can't also use my home system for entertainment I'll have to scrap those plans.

  Read the article

• IE9 will not navigate to some websites but Google Chrome can

  - by Storchburp

  Was recommended by a friend to ask for help here. I am using Internet Explorer 9. As of two days ago I was suddenly unable to navigate to any part of the following websites: www.computerandvideogames.com www.deviantart.com www.cnet.com However I can still access all of them normally through Google Chrome. I am on a college network but these sites are also accessible through fixed terminals provided by the school and are definitely not blocked. I do not know of any other sites similarly affected. There is no popup, no error message, no diversion to a site telling me I can't access / am blocked etc. I can be on www.google.com and attempt to access these sites through the URL or google search, and my cursor will just show the little moving blue wheel next to the arrow for a couple of seconds, and the page displayed on my browser will not change; ie. not navigating at all. Running antivirus software, changing proxy settings in IE, clearing cookies, unplugging/plugging in computer, restarting PC etc have not changed the situation. Any assistance or advice would be greatly appreciated. Thanks in advance.

  Read the article

• Windows CE restores default configuration after restart (Motorola MC3190)

  - by jarek

  Good morning, everyone! I have a problem with Motorola MC3190 hand scanner running on Windows CE. I've got few of those to make a new program for some kind of warehouse. There is already installed program which have been used by the customers before, so I delete this one and instead I install my new software which I've just made. It is running very well, but when I take out the battery and leave the device for entire night without power supply, it restores the whole configuration, so the old program is back, the wireless configuration is back and... Yeah. The scanner is restored to the configuration which was running when I received it few weeks ago. What I want to do is to set the whole configuration of the scanner so after a long power-off my program and my configuration will be restored. I truly believe someone knows how to do it. The time is running out, and I believe that the customer will be kind of annoyed when he will change the battery and the program which he bought will be gone. ;-) Regards, Jarek

  Read the article

• How to configure TFTPD32 to ignore non PXE DHCP requests?

  - by Ingmar Hupp

  I want to give our Windows guy a way of easily PXE booting machines for deployment by plugging his laptop into one of our site networks. I've set up a TFTPD32 configuration which does just that, and our normal DHCP server ignores the PXE DHCP requests due to them having some magic flag, so this part works as desired. However I'm not sure how to configure TFTPD32 to only respond to PXE DHCP requests (the ones with the magic flag) and ignore all normal DHCP requests (so that the production machines don't get a non-routed address from the PXE server). How do I configured TFTPD32 to ignore these non-PXE DHCP requests? Or if it can't, is there another equally easy to use piece of software that he can run on his Windows laptop? Since the TFTPD part is working fine, a DHCP server with the ability to serve PXE only would do. Worst case I'll have to set up a virtual machine with all this, but I'd much prefer a small, simple solution. I'm not interested in solutions that involve using the existing DHCP servers or separating machines on the network for deployment, the whole point is to be simple and stand-alone.

  Read the article

• Most transparent way to connect two LANS using a WET610N Wireless Bridge

  - by Spencer Ruport

  I have two wired systems hooked to a Linksys WRT54GL wired/wireless router which is also hooked to my internet. I'll refer to this as LAN1. I have two more systems in another room that are connected wirelessly. Recently I decided I would much rather have another wired LAN in the other room and use a bridge to connect them. This would be LAN2. Prior to hooking up the device I assumed that the ethernet side of the bridge would have a DHCP server so that I could simply hook it up to a switch and I'd be on my way. However that isn't the case which leads me to believe I'll have to add one to LAN2 correct? Or is there some way to have the DHCP from LAN1 also hand out IP addresses to LAN2? If I do need a DHCP device on LAN2 what would be best? Another hardware device or should I just install some DHCP software on one of the systems (since they're both on 24/7 anyway). Any recommendations would be appreciated. :)

  Read the article

• Calendar sharing between unrelated Domains

  - by vlannoob

  I have a 'request' from one of the 'big guys' that has me scratching my head a bit. He is one of our Executives that also is a board member of several other organistations, so he floats around between 4 different unrelated companies, each with their own domains, Exchange setup etc. He has domain accounts in each organisation. He has an iPad with multiple Exchange accounts so he can see all his calendars which works Ok for him - Apple calendaring bugs/flaws aside. What he wants is the ability for 'reception staff' at each organisation to 'see' all his calendars as they are booking things for him in their respective organisations calendars without it conflicting with bookings made in his calendars by other organisations......you with me?? So for example: Company A books a meeting into his Comapny A calendar at 9am Monday and Company B books him a meeting in his Company B Calendar at 9:15am Monday on the other side of town and of course Company C has him booked in all day Monday on their Company C calendar. He gets all those on his iPad but he would like either a 'global' calendar all can see and book into or the ability for receptionists at Company's A,B and C to see all the Calendars to avoid these kind of conflicts. I told him to 'go away' straight off the bat, I don't control anything to do with the other companies or know their infrastructure. And quite frankly I don't want any part of it...but he's whining and he's high enough up the food chain that I can't ignore him forever. I'm open to suggestions. Is there any third party software/services that can facilitiate this kind of setup? I really don't want to be creating users in my AD structure to people not ion our organisation so they can get access to his calendar and I am sure there sysadmins feel the same. As usual - any advice is greatly appreciated ;)

  Read the article

• How to tackle dell support system? [closed]

  - by Nishant Kumar

  We have purchased a Dell Optiplex 9010 SSFV for our organization's work. Since the first installation two of the USB keyboard keys were not working properly. I had to press those keys two times simultaneously, on first time keys did not work and for for second time it printed two characters (as it were buffering first character.) Two keys that were not working properly: Hexangrave (Below the ESC key: `) Double Quotes (Left the enter key ") We registered our complaint with DELL and they suggested (with some hard to understand and weird ENGLISH accent) some test and tricks, such as switching to different ports, checking keyboard on different PC, and it worked well with diff. PC(with Windows 7 Home Premium installed). It was clear that it is an OS fault, hence they suggested to re-install OS. Problem began here, we have a project on the run and currently a video editing project setup on our system, so can't re-install system in hurry and also DELL persons were not providing any other solution such as updating keyboard driver, etc. Arguments I am a Software Engg. and don't think it is a feasible solution to re-install entire system for simple problems. This prob is coming since the fresh system installation, so I don't think it will solve the problem. Finally, I had to find solution myself and got it here, now I want to show my disappointment to dell persons or at least tell them that they should improve there support system to not advice to re-install entire system for that simple problems. Notes We have purchased 5 years NEXT business day support from DELL for around 8000 INR (Not for that kind of solutions from DELL). So can anyone tell me how to tackle dell support system officially, so that they will pay more attention in near future. Thanks

  Read the article

• Network Traffic Log

  - by Chris Becke

  Background - On my "home" network I have a Linksys WTR45GL router providing my internet access as well as a wireless AP. Connected I have * 2 Windows PCs (wired) * At least one laptop (Wired) * Some 802.11 enabled handheld consoles (PSPs) * A Nintendo Wii * Some windows XP pcs used by the people in the granny flat. Where I live, South Africa, well, 1Gb worth of monthly cap is, while not expensive, costly enough that I'd like to be sure that all the bandwidth used by devices on my network is ... well ... legitimate and not the result of neighbors parasiting my wireless, malware or just the result of "liberal" download policies in my software. I got the Linksys WRT45GL on the understanding that there were custom firmwares (DD-WRT and Tomato) that allowed bandwidth tracking, but there doesn't seem to be any facility to get a log of traffic that can be examined to see (a) which local devices were the biggest consumers of bandwidth and (b) what they were connected to. What tools are there for logging traffic such that, when it gets to that OMG moment in the month when all my bandwidth is gone, I have a chance to find out what the hell used it all up (and hopefully attempt some corrective action).

  Read the article

• How to stop DW20.exe running on Win 2003 Server

  - by Laurence

  Periodically my ASP.NET application crashes (usually because memory consumption exceeds maximum allowed by application pool) and DW20.exe starts up. This is a big problem because it uses huge amounts of memory and CPU for minutes at a time. I want to know how to stop DW20.exe from running. Please note, I have already tried these often mentioned solutions: Disabling error reporting in Control Panel System Advanced Error Reporting Disabling the Error Reporting Service Modifying the registry as in http://support.microsoft.com/kb/841477 (however I might have done this wrong - this doc says "add a DWReportee value of 1" - what I did was add a DWORD entry with hexadecimal value of 1 - is this right? Also only 2 of the 4 keys were present, so I only modified these, e.g. there was no HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\PCHealth key at all) So, zero points for suggesting any of the above (unless you can see I have modified the registry incorrectly)! Also zero points for suggesting I resolve whatever is causing the application crashes :) - I am figuring this out, I just want something in the mean time to stop DW20.exe eating up all the server resources. By the way, this is a Windows 2003 SP1 server, with IIS 6 and SQL 2005 installed. There is no MS Office.

  Read the article

< Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >