Search Results

Search found 8190 results on 328 pages for 'switch'.

Page 68/328 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Differences between Cherry mechanical keyboard switches?

  - by TreyK

  I want a comfortable, responsive mechanical switch keyboard. My only concern about mechanical switch keyboards is the noise. Boards based off of the Cherry MX Blue seem to be the loudest, but apparently offer increased tactility. I don't mind a clicky noise (I would actually prefer a bit of noise), I just don't want anything overpowering. What are the different types of Cherry mechanical switches are out there, and what separates one from the other? Also, where would I be able to test one out?

  Read the article

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• How do I start Chrome using a specified "user profile"?

  - by Danny Tuppeny

  I use the new built-in "Users" feature of Chrome to switch between Home/Work accounts easily. However, Chrome remembers the "last" user profile you had selected when launching new windows. This is a problem if I close down my "Home" profile last, because when I then click the Email shortcut on my taskbar, because it goes to mail.mycompany.com using my Home profile, and I'm not logged in. I'd like to change the shortcut to the company webmail to pass a switch that tells Chrome to always start as the "Default" user, regardless of the last one used. Note: I have tried user-data-dir, and this seems to do something very different, completely isolated from the Users functionality built in to Chrome. It's possible I'm using it wrong, but please test this before assuming it does the same thing and posting an answer ;-)

  Read the article

• 10 System LAN latency with ADSL modem as gateway

  - by itsoft3g

  Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

  Read the article

• How to troubleshoot latency between 2 linux hosts

  - by Jimm

  The latency between 2 linux hosts is about .23ms. They are connected by one switch. Ping & Wireshark confirm the latency number. But, i dont have any visibility into what is causing this latency. How can i know if the latency is due to NIC on host A or B or the switch or the cables? UPDATE: The .23 ms latency is bad for my existing application, which sends messages at very high frequency and i am trying to see if it can be brought down to .1ms

  Read the article

• Is there DBus command to set position of KDE panel?

  - by Liss

  I have single vertical KDE panel. When I switch from single monitor X screen back to triple monitor X screen (with xrandr) my KDE panel ends up on the right edge of middle monitor, instead of right edge of right monitor. Also, many windows are in wrong place after the switch, but I have a script which restores geometry of all windows (as is used to be in triple monitor state before I switched to single monitor mode), so this is not a problem. Unfortunately, it does not work for KDE panel - it stays in the wrong place. I guess I need to use DBus to restore KDE panel position (programmatically move it to right edge of right screen), I tried googling, but it seems it is not very well documented. Is there DBus command to set position of KDE panel?

  Read the article

• Tons of spam on dreamhost mail user account

  - by user122022

  I use dreamhost for my webserver/ email host. I have about 25 users on one domain. and 1 of these users is absolutely inundated with spam every day. I have tried using dreamhosts poor blacklist feature, which was semi working (still letting a lot through) but I reached the 1000 email blacklist maximum very quickly. I have the ability to switch to google apps but that would be very expensive for 25 users. What options do I have aside from changing hosts with better spam filtering? I don't think its possible to only switch 1 user to google apps, it has to be the whole domain. There are other benefits to switching but I don't think they outweigh the cost for this company.

  Read the article

• How to check if a server runs in pressing mode

  - by Ice

  Hi there, Layout: i have at customer side a server (win2003 R2 SP2 standard edition 32-bit) with a sql-server 2005 and some databases. This system starts with the /3GB-Switch. The system reports 3.25 GB RAM and taskmanager reports the process of sqlserver.exe with 2758255 K as the process with the highest consumption. The OS separates RAM for applications and for itself, normaly 50:50. But here we have the /3GB-Switch aktivated and i think the part for the applications is more than 50% of RAM. Knowledge (or better not knowledge): Somebody told me that if the OS runs out of memory within his part of RAM, the server runs into pressing mode. Questions: What is this pressing mode? Is pressing mode possible at all in this szenario? What should be done to get more performance out of this sql-server, beside optimizing the database and all this stuff.

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• Poor quality when trying to stream a 720p video to XBox 360 using Media Center Extender

  - by MBraedley

  I have my XBox 360 set up as a Media Center Extender for my Windows 7 desktop. SD quality avi videos stream fine to my XBox, either though the video library or through Media Center Extender, but when I try a 720p mkv file, the frame rate plummets and the A/V sync is completely lost. I don't want to transcode or switch container formats (mkv isn't supported by the 360), but still want to stream. Both my desktop and 360 are plugged into the same gigabit switch, which is plugged into my ISP supplied modem/router. The video plays fine on my machine in a number of programs. Considering that I should have more than enough bandwidth to accommodate this video, why won't it play back properly?

  Read the article

• Find and raise a window in KDE4 with shortcut

  - by Andre_112

  Hi all! I was wondering about a possibility to find and raise some window in KDE4 with shortcut. Currently in KDE 4.4 there is a possibility to switch to window from krunner (Alt-F2). Say, I have an open konsole widow somewhere and to switch to it, I can Alt-F2, write konsole and choose konsole window I need from the list. This is great, but too much typing. I would like to have a keyboard shortcut to do the same. Maybe some DBUS magic can do that? Any ideas? Thaks! Andre

  Read the article

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• zero downtime during database scheme upgrade on SQL 2008

  - by eject

  I have web application on IIS7 with SQL server 2008 as RDBMS. Need get 0 downtime during future upgrades of ASP.NET code and DB schema as well. I need to get right scenario for this. I have 2 web servers and 2 sql servers and one http load balancer whcih allows to switch web backend server for web requests. Main goal is to make 1st web server and DB server up and running, update code and db schema on 2nd server and then switch all the requests to 2nd server and then main problem - how to copy data from 1st database 2nd (which was changed during upgrade).

  Read the article

• esx 4 - c7000 - cisco 3020

  - by gdavid

  I have 4 blades with esx 4 installed in a HP c7000 enclosure. They have 6 cisco 3020 for hp switches in the backend. The plan was to use 2 switches for iSCSI traffic and the other 4 for data traffic. I am having a problem trunking the switches to our existing environment. The documentation i keep finding online has commands/features that are not available on the 3020 switch. Does anyone have this setup anywhere? I am looking to do Virtual Switch Tagging (VST) so i can control the machines vlan via the port groups. The only time any configuration worked for us was when our network team placed the command switchport native vlan x this setup only allowed vlan x to pass traffic and only when the port group was in vlan 0. Ideas? thanks for any help. -GD

  Read the article

• Connecting guest OS to host os internet connection hyper-v

  - by autrevo

  Hyper-V internal switch and VM OS interfacing with Guest OS and IP Cofiguration When configuring hyper-v internal switch, Apart from physical lan adapter (say adapter 1), I see another LAN adapter (say adapter 2) added in host os. And we already have one virtual lan adapter in guest os, (say adapter 3) . adapter 1 is connected to internet with defaulty gateway say, 192.168.0.254 and uses class C IP. By con configuring adapter 2 and 3, I need to acheive two purpose - Access internet in guest os. seemlessly share files & folders between guest and host OS. Please, suggest, What is the best way to configure IP of these three adapters ?

  Read the article

• Is it possible to use multi keyboards with multi keyboard layouts simultaneously?

  - by mono

  Considering to switch to dvorak layout, but this terminal is used by multi users as the same user account. It is unacceptable to ask all people to switch layout, plus it is hard to use dvorak layout with a keyboard qwerty-ly labeled. But there are spare (USB,qwerty) keyboards, so if I plug another keyboard in and be able to use multi layouts on different psyical keyboard simultaneously (I will rearrange letters on keys), the problem get solved. solution for either windows or linux is fine. anyway thanks all.

  Read the article

• Does a single LACP channel over multiple switches increase redundancy?

  - by Sirch

  I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

  Read the article

• How do I stop someone from saturating my line & wasting CPU cycles

  - by JoshRibs

  My web host shows inbound & outbound traffic with mrtg. I have a steady 3.5mbps inbound traffic from Nigeria. Even assuming the source IPs & destination ports are blocked with Iptables & verifying nothing is listening on those ports, will the traffic still always pass through the switch & "get" to my server (where my server wastes CPU cycles "dropping" the packets)? Assuming I was setup with a hardware firewall, the traffic would still show in mrtg assuming the firewall is behind the switch? So is there any way to stop someone from saturating your 100mbps line, if they also have a 100mbps line? Other than filing an abuse complaint with the kind folks in Nigeria?

  Read the article

• How to block all multicast traffic travelling through a Cisco Catalyst 3750

  - by TrueDuality

  Something changed today. I can't seem to track down what, but one of our 3750s decided that it was going to forward all the multicast traffic it saw from the ghost server across every VLAN it has. I've tried writing a simple access group that consists of the following: access-list 100 deny ip any 224.0.0.10 0.0.0.255 access-list 100 permit ip any any I apparently mistakenly assumed that once applied to an interface that it would block all of the multicast traffic on that interface regardless of VLAN. I do not want any multicast traffic flowing through this particular switch to any VLAN or even to stay on the same VLAN beyond this switch. Does anyone have any ideas?

  Read the article

• Can a Linux system crash cause network issues?

  - by Supratik

  I have a Ubuntu box in my network which crashed, all the system connected to the switch in which the Ubuntu system was connected started giving problem. I removed that system from the network, since that was the last change I made in my network and everything was fine. So, to confirm this I again connected the system back to the network and the same network outage happened. When I checked the links it was fine. When I rebooted the problematic system and again connected back to the network switch everything started working. I think possibly the crash of the Ubuntu system could have caused this outage. Is there any possibility that a kernel crash can cause network issues?

  Read the article

• Squid3 not working. Access denied

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• solaris + why cant ping to default getway

  - by yael

  I have Solaris machine with IP 10.10.10.100 and default getway 10.10.10.1 and subnet 255.255.255.0 remark - solaris machine connected to cisco switch via cross cable and from switch to my laptop I configure my laptop to connect to my Solaris machine so my laptop IP is 10.10.10.1 and subnet 255.255.255.0 but something not clearly I have ssh connection from my laptop to my Solaris machine ( I mean I in my solaris machine ) but from Solaris machine I can do ping to 10.10.10.1 ? ( how it can be ??? ) please advice why?

  Read the article

• Computer hangs on start-up, but re-start always works

  - by user10604

  I press the power switch; the fans start whirring; then precisely nothing happens. The monitor lights (I have two monitors) blink to indicate that they aren't receiving any signal - no BIOS splash screen, nothing. This scenario occurs about 80 percent of the time, the other 20 percent being normal starts. Noticing that the computer has not started properly, I press the power switch for four seconds to turn the computer off, and then I press it again to start the computer for the second time. It always starts normally the second time. Always. The power supply is a 750W from SilverStone. The motherboard is a Gigabyte P55A-UD3P. The video card is an Asus EN9800GT. There's 8 GB of RAM. I don't know what other information might be pertinent. Help!

  Read the article

• How to open a program on particular desktop?

  - by Vi

  When I start GUI program, it's window appears appears on currently active desktop (essentially, on random desktop). How to make it to appear on the specified desktop? For example, at startup I want certain programs to be started and distributed to desktops. I've already set up config file of openbox to force some programs to always start on specific desktop. Ideally it should be like: start_on_desktop 1 gnome-terminal --tab -e program1 --tab -e program2 start_on_desktop 2 gnome-terminal --tab -e program3 --tab -e program4 start_on_desktop 3 firefox It should be able to start the same program on other desktop. Also dislike when I start program while being on desktop X then switch to desktop Y and SUDDENLY a program which should be on X appears on Y. When I start lots of programs on and switch often between desktops they end up being in chaos and I need to collect them together and redistribute sanely. Also I want the first initial gnome-terminal to be on desktop 3, but I also want subsequent gnome-terminals to be on the desktop where I pressed the keystroke (also configured in openbox) that launches gnome-terminal.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >