null layout manager - Page 684

Oracle Flashback Technologies - Overview

- by Sridhar_R-Oracle

Oracle Flashback Technologies - IntroductionIn his May 29th 2014 blog, my colleague Joe Meeks introduced Oracle Maximum Availability Architecture (MAA) and discussed both planned and unplanned outages. Let’s take a closer look at unplanned outages. These can be caused by physical failures (e.g., server, storage, network, file deletion, physical corruption, site failures) or by logical failures – cases where all components and files are physically available, but data is incorrect or corrupt. These logical failures are usually caused by human errors or application logic errors. This blog series focuses on these logical errors – what causes them and how to address and recover from them using Oracle Database Flashback. In this introductory blog post, I’ll provide an overview of the Oracle Database Flashback technologies and will discuss the features in detail in future blog posts. Let’s get started. We are all human beings (unless a machine is reading this), and making mistakes is a part of what we do…often what we do best! We “fat finger”, we spill drinks on keyboards, unplug the wrong cables, etc. In addition, many of us, in our lives as DBAs or developers, must have observed, caused, or corrected one or more of the following unpleasant events: Accidentally updated a table with wrong values !! Performed a batch update that went wrong - due to logical errors in the code !! Dropped a table !! How do DBAs typically recover from these types of errors? First, data needs to be restored and recovered to the point-in-time when the error occurred (incomplete or point-in-time recovery). Moreover, depending on the type of fault, it’s possible that some services – or even the entire database – would have to be taken down during the recovery process.Apart from error conditions, there are other questions that need to be addressed as part of the investigation. For example, what did the data look like in the morning, prior to the error? What were the various changes to the row(s) between two timestamps? Who performed the transaction and how can it be reversed? Oracle Database includes built-in Flashback technologies, with features that address these challenges and questions, and enable you to perform faster, easier, and convenient recovery from logical corruptions. HistoryFlashback Query, the first Flashback Technology, was introduced in Oracle 9i. It provides a simple, powerful and completely non-disruptive mechanism for data verification and recovery from logical errors, and enables users to view the state of data at a previous point in time.Flashback Technologies were further enhanced in Oracle 10g, to provide fast, easy recovery at the database, table, row, and even at a transaction level.Oracle Database 11g introduced an innovative method to manage and query long-term historical data with Flashback Data Archive. The 11g release also introduced Flashback Transaction, which provides an easy, one-step operation to back out a transaction. Oracle Database versions 11.2.0.2 and beyond further enhanced the performance of these features. Note that all the features listed here work without requiring any kind of restore operation.In addition, Flashback features are fully supported with the new multi-tenant capabilities introduced with Oracle Database 12c, Flashback Features Oracle Flashback Database enables point-in-time-recovery of the entire database without requiring a traditional restore and recovery operation. It rewinds the entire database to a specified point in time in the past by undoing all the changes that were made since that time.Oracle Flashback Table enables an entire table or a set of tables to be recovered to a point in time in the past.Oracle Flashback Drop enables accidentally dropped tables and all dependent objects to be restored.Oracle Flashback Query enables data to be viewed at a point-in-time in the past. This feature can be used to view and reconstruct data that was lost due to unintentional change(s) or deletion(s). This feature can also be used to build self-service error correction into applications, empowering end-users to undo and correct their errors.Oracle Flashback Version Query offers the ability to query the historical changes to data between two points in time or system change numbers (SCN) Oracle Flashback Transaction Query enables changes to be examined at the transaction level. This capability can be used to diagnose problems, perform analysis, audit transactions, and even revert the transaction by undoing SQLOracle Flashback Transaction is a procedure used to back-out a transaction and its dependent transactions.Flashback technologies eliminate the need for a traditional restore and recovery process to fix logical corruptions or make enquiries. Using these technologies, you can recover from the error in the same amount of time it took to generate the error. All the Flashback features can be accessed either via SQL command line (or) via Enterprise Manager. Most of the Flashback technologies depend on the available UNDO to retrieve older data. The following table describes the various Flashback technologies: their purpose, dependencies and situations where each individual technology can be used. Example Syntax Error investigation related:The purpose is to investigate what went wrong and what the values were at certain points in timeFlashback Queries ( select .. as of SCN | Timestamp ) - Helps to see the value of a row/set of rows at a point in timeFlashback Version Queries ( select .. versions between SCN | Timestamp and SCN | Timestamp) - Helps determine how the value evolved between certain SCNs or between timestamps Flashback Transaction Queries (select .. XID=) - Helps to understand how the transaction caused the changes.Error correction related:The purpose is to fix the error and correct the problems,Flashback Table (flashback table .. to SCN | Timestamp) - To rewind the table to a particular timestamp or SCN to reverse unwanted updates Flashback Drop (flashback table .. to before drop ) - To undrop or undelete a table Flashback Database (flashback database to SCN | Restore Point ) - This is the rewind button for Oracle databases. You can revert the entire database to a particular point in time. It is a fast way to perform a PITR (point-in-time recovery). Flashback Transaction (DBMS_FLASHBACK.TRANSACTION_BACKOUT(XID..)) - To reverse a transaction and its related transactions Advanced use cases Flashback technology is integrated into Oracle Recovery Manager (RMAN) and Oracle Data Guard. So, apart from the basic use cases mentioned above, the following use cases are addressed using Oracle Flashback. Block Media recovery by RMAN - to perform block level recovery Snapshot Standby - where the standby is temporarily converted to a read/write environment for testing, backup, or migration purposes Re-instate old primary in a Data Guard environment – this avoids the need to restore an old backup and perform a recovery to make it a new standby. Guaranteed Restore Points - to bring back the entire database to an older point-in-time in a guaranteed way. and so on..I hope this introductory overview helps you understand how Flashback features can be used to investigate and recover from logical errors. As mentioned earlier, I will take a deeper-dive into to some of the critical Flashback features in my upcoming blogs and address common use cases.

Read the article

problem in loading images from web

- by Lynnooi

hi, I am new in android and had developed an app which get images from the website and display it. I got it working in emulator but not in real phones. In some device, it will crash or take very long loading period. Can anyone please help me or guide me in improving it as i'm not sure whether the way i loads the images is correct or not. Here are the code i use to get the images from the web and display accordingly. if (xmlURL.length() != 0) { try { URL url = new URL(xmlURL); SAXParserFactory spf = SAXParserFactory.newInstance(); SAXParser sp = spf.newSAXParser(); /* Get the XMLReader of the SAXParser we created. */ XMLReader xr = sp.getXMLReader(); /* * Create a new ContentHandler and apply it to the * XML-Reader */ xr.setContentHandler(myExampleHandler); /* Parse the xml-data from our URL. */ xr.parse(new InputSource(url.openStream())); /* Parsing has finished. */ /* * Our ExampleHandler now provides the parsed data to * us. */ ParsedExampleDataSet parsedExampleDataSet = myExampleHandler.getParsedData(); } catch (Exception e) { } } if (s.equalsIgnoreCase("wallpapers")) { Context context = helloAndroid.this.getBaseContext(); for (int j = 0; j <= myExampleHandler.filenames.size() - 1; j++) { if (myExampleHandler.filenames.elementAt(j).toString() != null) { helloAndroid.this.ed = myExampleHandler.thumbs.elementAt(j) .toString(); if (helloAndroid.this.ed.length() != 0) { Drawable image = ImageOperations(context, helloAndroid.this.ed, "image.jpg"); file_info = myExampleHandler.filenames .elementAt(j).toString(); author = "\nby " + myExampleHandler.authors.elementAt(j) .toString(); switch (j + 1) { case 1: ImageView imgView1 = new ImageView(context); imgView1 = (ImageView) findViewById(R.id.image1); if (image.getIntrinsicHeight() > 0) { imgView1.setImageDrawable(image); } else imgView1 .setImageResource(R.drawable.empty_wallpaper); tv = (TextView) findViewById(R.id.filename1); tv.setText(file_info); tv = (TextView) findViewById(R.id.author1); tv.setText(author); imgView1 .setOnClickListener(new View.OnClickListener() { public void onClick(View view) { // Perform action on click Intent myIntent1 = new Intent( helloAndroid.this, galleryFile.class); Bundle b = new Bundle(); b.putString("fileID",myExampleHandler.fileid.elementAt(0).toString()); b.putString("page", "1"); b.putString("family", s); b.putString("fi",myExampleHandler.folder_id.elementAt(folder).toString()); b.putString("kw", keyword); myIntent1.putExtras(b); startActivityForResult( myIntent1, 0); } }); break; case 2: ImageView imgView2 = new ImageView(context); imgView2 = (ImageView) findViewById(R.id.image2); imgView2.setImageDrawable(image); tv = (TextView) findViewById(R.id.filename2); tv.setText(file_info); tv = (TextView) findViewById(R.id.author2); tv.setText(author); imgView2 .setOnClickListener(new View.OnClickListener() { public void onClick(View view) { // Perform action on click Intent myIntent1 = new Intent( helloAndroid.this, galleryFile.class); Bundle b = new Bundle(); b.putString("fileID",myExampleHandler.fileid.elementAt(1).toString()); b.putString("page", "1"); b.putString("family", s); b.putString("fi",myExampleHandler.folder_id.elementAt(folder).toString()); b.putString("kw", keyword); myIntent1.putExtras(b); startActivityForResult( myIntent1, 0); } }); break; case 3: //same code break; } } } } } private Drawable ImageOperations(Context ctx, String url, String saveFilename) { try { InputStream is = (InputStream) this.fetch(url); Drawable d = Drawable.createFromStream(is, "src"); return d; } catch (MalformedURLException e) { e.printStackTrace(); return null; } catch (IOException e) { e.printStackTrace(); return null; } } public Object fetch(String address) throws MalformedURLException, IOException { URL url = new URL(address); Object content = url.getContent(); return content; }

Read the article

CheckBox ListView SelectedValues DependencyProperty Binding

- by Ristogod

I am writing a custom control that is a ListView that has a CheckBox on each item in the ListView to indicate that item is Selected. I was able to do so with the following XAML. <ListView x:Class="CheckedListViewSample.CheckBoxListView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d"> <ListView.Style> <Style TargetType="{x:Type ListView}"> <Setter Property="SelectionMode" Value="Multiple" /> <Style.Resources> <Style TargetType="ListViewItem"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="ListViewItem"> <Border BorderThickness="{TemplateBinding Border.BorderThickness}" Padding="{TemplateBinding Control.Padding}" BorderBrush="{TemplateBinding Border.BorderBrush}" Background="{TemplateBinding Panel.Background}" SnapsToDevicePixels="True"> <CheckBox IsChecked="{Binding IsSelected, RelativeSource={RelativeSource FindAncestor, AncestorType={x:Type ListViewItem}}}"> <CheckBox.Content> <ContentPresenter Content="{TemplateBinding ContentControl.Content}" ContentTemplate="{TemplateBinding ContentControl.ContentTemplate}" HorizontalAlignment="{TemplateBinding Control.HorizontalContentAlignment}" VerticalAlignment="{TemplateBinding Control.VerticalContentAlignment}" SnapsToDevicePixels="{TemplateBinding UIElement.SnapsToDevicePixels}" /> </CheckBox.Content> </CheckBox> </Border> </ControlTemplate> </Setter.Value> </Setter> </Style> </Style.Resources> </Style> </ListView.Style> </ListView> I however am trying to attempt one more feature. The ListView has a SelectedItems DependencyProperty that returns a collection of the Items that are checked. However, I need to implement a SelectedValues DependencyProperty. I also am implementing a SelectedValuesPath DependencyProperty. By using the SelectedValuesPath, I indicate the path where the values are found for each selected item. So if my items have an ID property, I can specify using the SelectedValuesPath property "ID". The SelectedValues property would then return a collection of ID values. I have this working also using this code in the code-behind: using System.Windows; using System.Windows.Controls; using System.ComponentModel; using System.Collections; using System.Collections.Generic; namespace CheckedListViewSample { /// <summary> /// Interaction logic for CheckBoxListView.xaml /// </summary> public partial class CheckBoxListView : ListView { public static DependencyProperty SelectedValuesPathProperty = DependencyProperty.Register("SelectedValuesPath", typeof(string), typeof(CheckBoxListView), new PropertyMetadata(string.Empty, null)); public static DependencyProperty SelectedValuesProperty = DependencyProperty.Register("SelectedValues", typeof(IList), typeof(CheckBoxListView), new PropertyMetadata(new List<object>(), null)); [Category("Appearance")] [Localizability(LocalizationCategory.NeverLocalize)] [Bindable(true)] public string SelectedValuesPath { get { return ((string)(base.GetValue(CheckBoxListView.SelectedValuesPathProperty))); } set { base.SetValue(CheckBoxListView.SelectedValuesPathProperty, value); } } [Bindable(true)] [DesignerSerializationVisibility(DesignerSerializationVisibility.Hidden)] [Category("Appearance")] public IList SelectedValues { get { return ((IList)(base.GetValue(CheckBoxListView.SelectedValuesPathProperty))); } set { base.SetValue(CheckBoxListView.SelectedValuesPathProperty, value); } } public CheckBoxListView() : base() { InitializeComponent(); base.SelectionChanged += new SelectionChangedEventHandler(CheckBoxListView_SelectionChanged); } private void CheckBoxListView_SelectionChanged(object sender, SelectionChangedEventArgs e) { List<object> values = new List<object>(); foreach (var item in SelectedItems) { if (string.IsNullOrWhiteSpace(SelectedValuesPath)) { values.Add(item); } else { try { values.Add(item.GetType().GetProperty(SelectedValuesPath).GetValue(item, null)); } catch { } } } base.SetValue(CheckBoxListView.SelectedValuesProperty, values); e.Handled = true; } } } My problem is that my binding only works one way right now. I'm having trouble trying to figure out how to implement my SelectedValues DependencyProperty so that I could Bind a Collection of values to it, and when the control is loaded, the CheckBoxes are checked with items that have values that correspond to the SelectedValues. I've considered using the PropertyChangedCallBack event, but can't quite figure out how I could write that to achieve my goal. I'm also unsure of how I find the correct ListViewItem to set it as Selected. And lastly, if I can find the ListViewItem and set it to be Selected, won't that fire my SelectionChanged event each time I set a ListViewItem to be Selected?

Read the article

regular expression to read the string between <title> and </title>

- by user262325

Hello every one I hope to read the contents between and in a html string. I think it should be in objective-c @"<title([\\s\\S]*)</title>" below are the codes that rewrited for regular expression //source of NSStringCategory.h #import <Foundation/Foundation.h> #import <regex.h> @interface NSStringCategory:NSObject { regex_t preg; } -(id)initWithPattern:(NSString *)pattern options:(int)options; -(void)dealloc; -(BOOL)matchesString:(NSString *)string; -(NSString *)matchedSubstringOfString:(NSString *)string; -(NSArray *)capturedSubstringsOfString:(NSString *)string; +(NSStringCategory *)regexWithPattern:(NSString *)pattern options:(int)options; +(NSStringCategory *)regexWithPattern:(NSString *)pattern; +(NSString *)null; +(void)initialize; @end @interface NSString (NSStringCategory) -(BOOL)matchedByPattern:(NSString *)pattern options:(int)options; -(BOOL)matchedByPattern:(NSString *)pattern; -(NSString *)substringMatchedByPattern:(NSString *)pattern options:(int)options; -(NSString *)substringMatchedByPattern:(NSString *)pattern; -(NSArray *)substringsCapturedByPattern:(NSString *)pattern options:(int)options; -(NSArray *)substringsCapturedByPattern:(NSString *)pattern; -(NSString *)escapedPattern; @end and .m file #import "NSStringCategory.h" static NSString *nullstring=nil; @implementation NSStringCategory -(id)initWithPattern:(NSString *)pattern options:(int)options { if(self=[super init]) { int err=regcomp(&preg,[pattern UTF8String],options|REG_EXTENDED); if(err) { char errbuf[256]; regerror(err,&preg,errbuf,sizeof(errbuf)); [NSException raise:@"CSRegexException" format:@"Could not compile regex \"%@\": %s",pattern,errbuf]; } } return self; } -(void)dealloc { regfree(&preg); [super dealloc]; } -(BOOL)matchesString:(NSString *)string { if(regexec(&preg,[string UTF8String],0,NULL,0)==0) return YES; return NO; } -(NSString *)matchedSubstringOfString:(NSString *)string { const char *cstr=[string UTF8String]; regmatch_t match; if(regexec(&preg,cstr,1,&match,0)==0) { return [[[NSString alloc] initWithBytes:cstr+match.rm_so length:match.rm_eo-match.rm_so encoding:NSUTF8StringEncoding] autorelease]; } return nil; } -(NSArray *)capturedSubstringsOfString:(NSString *)string { const char *cstr=[string UTF8String]; int num=preg.re_nsub+1; regmatch_t *matches=calloc(sizeof(regmatch_t),num); if(regexec(&preg,cstr,num,matches,0)==0) { NSMutableArray *array=[NSMutableArray arrayWithCapacity:num]; int i; for(i=0;i<num;i++) { NSString *str; if(matches[i].rm_so==-1&&matches[i].rm_eo==-1) str=nullstring; else str=[[[NSString alloc] initWithBytes:cstr+matches[i].rm_so length:matches[i].rm_eo-matches[i].rm_so encoding:NSUTF8StringEncoding] autorelease]; [array addObject:str]; } free(matches); return [NSArray arrayWithArray:array]; } free(matches); return nil; } +(NSStringCategory *)regexWithPattern:(NSString *)pattern options:(int)options { return [[[NSStringCategory alloc] initWithPattern:pattern options:options] autorelease]; } +(NSStringCategory *)regexWithPattern:(NSString *)pattern { return [[[NSStringCategory alloc] initWithPattern:pattern options:0] autorelease]; } +(NSString *)null { return nullstring; } +(void)initialize { if(!nullstring) nullstring=[[NSString alloc] initWithString:@""]; } @end @implementation NSString (NSStringCategory) -(BOOL)matchedByPattern:(NSString *)pattern options:(int)options { NSStringCategory *re=[NSStringCategory regexWithPattern:pattern options:options|REG_NOSUB]; return [re matchesString:self]; } -(BOOL)matchedByPattern:(NSString *)pattern { return [self matchedByPattern:pattern options:0]; } -(NSString *)substringMatchedByPattern:(NSString *)pattern options:(int)options { NSStringCategory *re=[NSStringCategory regexWithPattern:pattern options:options]; return [re matchedSubstringOfString:self]; } -(NSString *)substringMatchedByPattern:(NSString *)pattern { return [self substringMatchedByPattern:pattern options:0]; } -(NSArray *)substringsCapturedByPattern:(NSString *)pattern options:(int)options { NSStringCategory *re=[NSStringCategory regexWithPattern:pattern options:options]; return [re capturedSubstringsOfString:self]; } -(NSArray *)substringsCapturedByPattern:(NSString *)pattern { return [self substringsCapturedByPattern:pattern options:0]; } -(NSString *)escapedPattern { int len=[self length]; NSMutableString *escaped=[NSMutableString stringWithCapacity:len]; for(int i=0;i<len;i++) { unichar c=[self characterAtIndex:i]; if(c=='^'||c=='.'||c=='['||c=='$'||c=='('||c==')' ||c=='|'||c=='*'||c=='+'||c=='?'||c=='{'||c=='\\') [escaped appendFormat:@"\\%C",c]; else [escaped appendFormat:@"%C",c]; } return [NSString stringWithString:escaped]; } @end I use the codes below to get the string between "" and "" NSStringCategory *a=[[NSStringCategory alloc] initWithPattern:@"<title([\s\S]*)</title>" options:0];// Unfortunately [a matchedSubstringOfString:response]] always returns nil I do not if the regular expression is wrong or any other reason. Welcome any comment Thanks interdev

Read the article

April Oracle Database Events

- by Mandy Ho

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} April 17-18, 2012 – Moscow, Russia Oracle Develop Conference The Oracle database developer conference, Oracle Develop, will visit Moscow, Russia and Hyderabad, India this spring. Oracle Develop includes a database development track, which contains .NET sessions and hands-on lab led by an Oracle .NET product manager. Register today before the event fills up. http://www.oracle.com/javaone/ru-en/index.html Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} April 24, 26 – San Diego, CA & San Jose, CA ISC2 Leadership Regional Event Series Oracle at (ISC)2 Security Leadership Series: Herding Clouds -- Managing Cloud Security Concerns and Expectations Join us for his interactive day-long session where industry leaders, including Oracle solution experts, will talk about how to: dispel the top Cloud security myths minimize "rogue Cloud" implementations identify potential compliance pitfalls and how to avoid them develop contract language for your cloud providers manage users across your fractured datacenter leverage existing technologies to protect data as it moves from the enterprise to the cloud http://www.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=146972&src=7239493&src=7239493&Act=228 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} April 22-26, 2012 – Las Vegas, NV IOUG Collaborate 12 From April 22-26, 2012, Oracle takes Las Vegas. Thousands of Oracle professionals will descend upon the Mandalay Bay Convention Center for a weeks worth of education sessions, networking opportunities and more, at the only user-driven and user-run Oracle conference - COLLABORATE 12. Your COLLABORATE 12 - IOUG Forum registration comes complete with a bonus- a full day Deep Dive education program on Sunday! Choose from numerous hot topics, including Real World Performance, High Availability and more, presented by legendary and seasoned Oracle pros, including Tom Kyte and Craig Shallahamer. http://www.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=143637&src=7360364&src=7360364&Act=5 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Independent Oracle User Group (IOUG) Regional Events: April 16, 2012 – Columbus, Ohio Ohio Oracle Users Group Higher Performance PL/PQL and Oracle Database 11g PL/SQL New Features – Featuring Steven Feuerstein http://www.ooug.org/ Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} April 26, 2012- Irving, TX Dallas Oracle Users Group Oracle Database Forum: 5-7PM Oracle Corporation, 6031 Connection Drive Irving, TX http://memberservices.membee.com/538/irmevents.aspx?id=64 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Apr 30, 2012- Los Angeles, CA Real World Performance Tour A full day of real world database performance with: Tom Kyte, author of the ever popular AskTom Blog, Andrew Holdsworth, head of Oracle's Real World Performance Team, and Graham Wood, renowned Oracle Database performance architect. Through discussion, debate and demos, they’ll show you how to master performance engineering topics like: Best practices for designing hardware architectures and how to spot and fix bad design. How to develop applications that deliver the fastest possible performance without sacrificing accuracy. New for 2012! Updates on Enterprise Manager, Exadata, and what these technologies mean to your current systems. http://www.ioug.org/Events/ADayofRealWorldPerformance/tabid/194/Default.aspx

Read the article

JPA behaviour...

- by Marcel

Hi I have some trouble understanding a JPA behaviour. Mabye someone could give me a hint. Situation: Product entity: @Entity public class Product implements Serializable { ... @OneToMany(mappedBy="product", fetch=FetchType.EAGER) private List<ProductResource> productResources = new ArrayList<ProductResource>(); .... public List<ProductResource> getProductResources() { return productResources; } public boolean equals(Object obj) { if (obj == this) return true; if (obj == null) return false; if (!(obj instanceof Product)) return false; Product p = (Product) obj; return p.productId == productId; } } Resource entity: @Entity public class Resource implements Serializable { ... @OneToMany(mappedBy="resource", fetch=FetchType.EAGER) private List<ProductResource> productResources = new ArrayList<ProductResource>(); ... public void setProductResource(List<ProductResource> productResource) { this.productResources = productResource; } public List<ProductResource> getProductResources() { return productResources; } public boolean equals(Object obj) { if (obj == this) return true; if (obj == null) return false; if (!(obj instanceof Resource)) return false; Resource r = (Resource) obj; return (long)resourceId==(long)r.resourceId; } } ProductResource Entity: This is a JoinTable (association class) with additional properties (amount). It maps Product and Resources. @Entity public class ProductResource implements Serializable { ... @JoinColumn(nullable=false, updatable=false) @ManyToOne(fetch=FetchType.EAGER, cascade=CascadeType.PERSIST) private Product product; @JoinColumn(nullable=false, updatable=false) @ManyToOne(fetch=FetchType.EAGER, cascade=CascadeType.PERSIST) private Resource resource; private int amount; public void setProduct(Product product) { this.product = product; if(!product.getProductResources().contains((this))){ product.getProductResources().add(this); } } public Product getProduct() { return product; } public void setResource(Resource resource) { this.resource = resource; if(!resource.getProductResources().contains((this))){ resource.getProductResources().add(this); } } public Resource getResource() { return resource; } ... public boolean equals(Object obj) { if (obj == this) return true; if (obj == null) return false; if (!(obj instanceof ProductResource)) return false; ProductResource pr = (ProductResource) obj; return (long)pr.productResourceId == (long)productResourceId; } } This is the Session Bean (running on glassfish). @Stateless(mappedName="PersistenceManager") public class PersistenceManagerBean implements PersistenceManager { @PersistenceContext(unitName = "local_mysql") private EntityManager em; public Object create(Object entity) { em.persist(entity); return entity; } public void delete(Object entity) { em.remove(em.merge(entity)); } public Object retrieve(Class entityClass, Long id) { Object entity = em.find(entityClass, id); return entity; } public void update(Object entity) { em.merge(entity); } } I call the session Bean from a java client: public class Start { public static void main(String[] args) throws NamingException { PersistenceManager pm = (PersistenceManager) new InitialContext().lookup("java:global/BackITServer/PersistenceManagerBean"); ProductResource pr = new ProductResource(); Product p = new Product(); Resource r = new Resource(); pr.setProduct(p); pr.setResource(r); ProductResource pr_stored = (ProductResource) pm.create(pr); pm.delete(pr_stored); Product p_ret = (Product) pm.retrieve(Product.class, pr_stored.getProduct().getProductId()); // prints out true ???????????????????????????????????? System.out.println(p_ret.getProductResources().contains(pr_stored)); } } So here comes my problem. Why is the ProductResource entity still in the List productResources(see code above). The productResource tuple in the db is gone after the deletion and I do newly retrieve the Product entity. If I understood right every method call of the client happens in a new persistence context, but here i obviously get back the non-refreshed product object!? Any help is appreciated Thanks Marcel

Read the article

More SharePoint 2010 Expression Builders

- by Ricardo Peres

Introduction Following my last post, I decided to publish the whole set of expression builders that I use with SharePoint. For all who don’t know about expression builders, they allow us to employ a declarative approach, so that we don’t have to write code for “gluing” things together, like getting a value from the query string, the page’s underlying SPListItem or the current SPContext and assigning it to a control’s property. These expression builders are for some quite common scenarios, I use them quite often, and I hope you find them useful as well. SPContextExpression This expression builder allows us to specify an expression to be processed on the SPContext.Current property object. For example: 1: <asp:Literal runat="server" Text=“<%$ SPContextExpression:Site.RootWeb.Lists[0].Author.LoginName %>”/> It is identical to having the following code: 1: String authorName = SPContext.Current.Site.RootWeb.Lists[0].Author.LoginName; SPFarmProperty Returns a property stored on the farm level: 1: <asp:Literal runat="server" Text="<%$ SPFarmProperty:SomeProperty %>"/> Identical to: 1: Object someProperty = SPFarm.Local.Properties["SomeProperty"]; SPField Returns the value of a selected page’s list item field: 1: <asp:Literal runat="server" Text="<%$ SPField:Title %>"/> Does the same as: 1: String title = SPContext.Current.ListItem["Title"] as String; SPIsInAudience Checks if the current user belongs to an audience: 1: <asp:CheckBox runat="server" Checked="<%$ SPIsInAudience:SomeAudience %>"/> Equivalent to: 1: AudienceManager audienceManager = new AudienceManager(SPServiceContext.Current); 2: Audience audience = audienceManager.Audiences["SomeAudience"]; 3: Boolean isMember = audience.IsMember(SPContext.Current.Web.User.LoginName); SPIsInGroup Checks if the current user belongs to a group: 1: <asp:CheckBox runat="server" Checked="<%$ SPIsInGroup:SomeGroup %>"/> The equivalent C# code is: 1: SPContext.Current.Web.CurrentUser.Groups.OfType<SPGroup>().Any(x => String.Equals(x.Name, “SomeGroup”, StringComparison.OrdinalIgnoreCase)); SPProperty Returns the value of a user profile property for the current user: 1: <asp:Literal runat="server" Text="<%$ SPProperty:LastName %>"/> Where the same code in C# would be: 1: UserProfileManager upm = new UserProfileManager(SPServiceContext.Current); 2: UserProfile u = upm.GetUserProfile(false); 3: Object property = u["LastName"].Value; SPQueryString Returns a value passed on the query string: 1: <asp:GridView runat="server" PageIndex="<%$ SPQueryString:PageIndex %>" /> Is equivalent to (no SharePoint code this time): 1: Int32 pageIndex = Convert.ChangeType(typeof(Int32), HttpContext.Current.Request.QueryString["PageIndex"]); SPWebProperty Returns the value of a property stored at the site level: 1: <asp:Literal runat="server" Text="<%$ SPWebProperty:__ImagesListId %>"/> You can get the same result as: 1: String imagesListId = SPContext.Current.Web.AllProperties["__ImagesListId"] as String; Code OK, let’s move to the code. First, a common abstract base class, mainly for inheriting the conversion method: 1: public abstract class SPBaseExpressionBuilder : ExpressionBuilder 2: { 3: #region Protected static methods 4: protected static Object Convert(Object value, PropertyInfo propertyInfo) 5: { 6: if (value != null) 7: { 8: if (propertyInfo.PropertyType.IsAssignableFrom(value.GetType()) == false) 9: { 10: if (propertyInfo.PropertyType.IsEnum == true) 11: { 12: value = Enum.Parse(propertyInfo.PropertyType, value.ToString(), true); 13: } 14: else if (propertyInfo.PropertyType == typeof(String)) 15: { 16: value = value.ToString(); 17: } 18: else if ((typeof(IConvertible).IsAssignableFrom(propertyInfo.PropertyType) == true) && (typeof(IConvertible).IsAssignableFrom(value.GetType()) == true)) 19: { 20: value = System.Convert.ChangeType(value, propertyInfo.PropertyType); 21: } 22: } 23: } 24: 25: return (value); 26: } 27: #endregion 28: 29: #region Public override methods 30: public override CodeExpression GetCodeExpression(BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 31: { 32: if (String.IsNullOrEmpty(entry.Expression) == true) 33: { 34: return (new CodePrimitiveExpression(String.Empty)); 35: } 36: else 37: { 38: return (new CodeMethodInvokeExpression(new CodeMethodReferenceExpression(new CodeTypeReferenceExpression(this.GetType()), "GetValue"), new CodePrimitiveExpression(entry.Expression.Trim()), new CodePropertyReferenceExpression(new CodeArgumentReferenceExpression("entry"), "PropertyInfo"))); 39: } 40: } 41: #endregion 42: 43: #region Public override properties 44: public override Boolean SupportsEvaluate 45: { 46: get 47: { 48: return (true); 49: } 50: } 51: #endregion 52: } Next, the code for each expression builder: 1: [ExpressionPrefix("SPContext")] 2: public class SPContextExpressionBuilder : SPBaseExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetValue(String expression, PropertyInfo propertyInfo) 6: { 7: SPContext context = SPContext.Current; 8: Object expressionValue = DataBinder.Eval(context, expression.Trim().Replace('\'', '"')); 9: 10: expressionValue = Convert(expressionValue, propertyInfo); 11: 12: return (expressionValue); 13: } 14: 15: #endregion 16: 17: #region Public override methods 18: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 19: { 20: return (GetValue(entry.Expression, entry.PropertyInfo)); 21: } 22: #endregion 23: } 1: [ExpressionPrefix("SPFarmProperty")] 2: public class SPFarmPropertyExpressionBuilder : SPBaseExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetValue(String propertyName, PropertyInfo propertyInfo) 6: { 7: Object propertyValue = SPFarm.Local.Properties[propertyName]; 8: 9: propertyValue = Convert(propertyValue, propertyInfo); 10: 11: return (propertyValue); 12: } 13: 14: #endregion 15: 16: #region Public override methods 17: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 18: { 19: return (GetValue(entry.Expression, entry.PropertyInfo)); 20: } 21: #endregion 22: } 1: [ExpressionPrefix("SPField")] 2: public class SPFieldExpressionBuilder : SPBaseExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetValue(String fieldName, PropertyInfo propertyInfo) 6: { 7: Object fieldValue = SPContext.Current.ListItem[fieldName]; 8: 9: fieldValue = Convert(fieldValue, propertyInfo); 10: 11: return (fieldValue); 12: } 13: 14: #endregion 15: 16: #region Public override methods 17: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 18: { 19: return (GetValue(entry.Expression, entry.PropertyInfo)); 20: } 21: #endregion 22: } 1: [ExpressionPrefix("SPIsInAudience")] 2: public class SPIsInAudienceExpressionBuilder : SPBaseExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetValue(String audienceName, PropertyInfo info) 6: { 7: Debugger.Break(); 8: audienceName = audienceName.Trim(); 9: 10: if ((audienceName.StartsWith("'") == true) && (audienceName.EndsWith("'") == true)) 11: { 12: audienceName = audienceName.Substring(1, audienceName.Length - 2); 13: } 14: 15: AudienceManager manager = new AudienceManager(); 16: Object value = manager.IsMemberOfAudience(SPControl.GetContextWeb(HttpContext.Current).CurrentUser.LoginName, audienceName); 17: 18: if (info.PropertyType == typeof(String)) 19: { 20: value = value.ToString(); 21: } 22: 23: return(value); 24: } 25: 26: #endregion 27: 28: #region Public override methods 29: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 30: { 31: return (GetValue(entry.Expression, entry.PropertyInfo)); 32: } 33: #endregion 34: } 1: [ExpressionPrefix("SPIsInGroup")] 2: public class SPIsInGroupExpressionBuilder : SPBaseExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetValue(String groupName, PropertyInfo info) 6: { 7: groupName = groupName.Trim(); 8: 9: if ((groupName.StartsWith("'") == true) && (groupName.EndsWith("'") == true)) 10: { 11: groupName = groupName.Substring(1, groupName.Length - 2); 12: } 13: 14: Object value = SPControl.GetContextWeb(HttpContext.Current).CurrentUser.Groups.OfType<SPGroup>().Any(x => String.Equals(x.Name, groupName, StringComparison.OrdinalIgnoreCase)); 15: 16: if (info.PropertyType == typeof(String)) 17: { 18: value = value.ToString(); 19: } 20: 21: return(value); 22: } 23: 24: #endregion 25: 26: #region Public override methods 27: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 28: { 29: return (GetValue(entry.Expression, entry.PropertyInfo)); 30: } 31: #endregion 32: } 1: [ExpressionPrefix("SPProperty")] 2: public class SPPropertyExpressionBuilder : SPBaseExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetValue(String propertyName, System.Reflection.PropertyInfo propertyInfo) 6: { 7: SPServiceContext serviceContext = SPServiceContext.GetContext(HttpContext.Current); 8: UserProfileManager upm = new UserProfileManager(serviceContext); 9: UserProfile up = upm.GetUserProfile(false); 10: Object propertyValue = (up[propertyName] != null) ? up[propertyName].Value : null; 11: 12: propertyValue = Convert(propertyValue, propertyInfo); 13: 14: return (propertyValue); 15: } 16: 17: #endregion 18: 19: #region Public override methods 20: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 21: { 22: return (GetValue(entry.Expression, entry.PropertyInfo)); 23: } 24: #endregion 25: } 1: [ExpressionPrefix("SPQueryString")] 2: public class SPQueryStringExpressionBuilder : SPBaseExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetValue(String parameterName, PropertyInfo propertyInfo) 6: { 7: Object parameterValue = HttpContext.Current.Request.QueryString[parameterName]; 8: 9: parameterValue = Convert(parameterValue, propertyInfo); 10: 11: return (parameterValue); 12: } 13: 14: #endregion 15: 16: #region Public override methods 17: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 18: { 19: return (GetValue(entry.Expression, entry.PropertyInfo)); 20: } 21: #endregion 22: } 1: [ExpressionPrefix("SPWebProperty")] 2: public class SPWebPropertyExpressionBuilder : SPBaseExpressionBuilder 3: { 4: #region Public static methods 5: public static Object GetValue(String propertyName, PropertyInfo propertyInfo) 6: { 7: Object propertyValue = SPContext.Current.Web.AllProperties[propertyName]; 8: 9: propertyValue = Convert(propertyValue, propertyInfo); 10: 11: return (propertyValue); 12: } 13: 14: #endregion 15: 16: #region Public override methods 17: public override Object EvaluateExpression(Object target, BoundPropertyEntry entry, Object parsedData, ExpressionBuilderContext context) 18: { 19: return (GetValue(entry.Expression, entry.PropertyInfo)); 20: } 21: #endregion 22: } Registration You probably know how to register them, but here it goes again: add this following snippet to your Web.config file, inside the configuration/system.web/compilation/expressionBuilders section: 1: <add expressionPrefix="SPContext" type="MyNamespace.SPContextExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=xxx" /> 2: <add expressionPrefix="SPFarmProperty" type="MyNamespace.SPFarmPropertyExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=xxx" /> 3: <add expressionPrefix="SPField" type="MyNamespace.SPFieldExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=xxx" /> 4: <add expressionPrefix="SPIsInAudience" type="MyNamespace.SPIsInAudienceExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=xxx" /> 5: <add expressionPrefix="SPIsInGroup" type="MyNamespace.SPIsInGroupExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=xxx" /> 6: <add expressionPrefix="SPProperty" type="MyNamespace.SPPropertyExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=xxx" /> 7: <add expressionPrefix="SPQueryString" type="MyNamespace.SPQueryStringExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=xxx" /> 8: <add expressionPrefix="SPWebProperty" type="MyNamespace.SPWebPropertyExpressionBuilder, MyAssembly, Culture=neutral, Version=1.0.0.0, PublicKeyToken=xxx" /> I’ll leave it up to you to figure out the best way to deploy this to your server!

Read the article

Can you help me fix my broken packages?

- by Andreas Hartmann

I would like to upgrade from 13.04 to 13.10, but some broken packages are preventing upgrade success: grep Broken /var/log/dist-upgrade/apt.log output: Broken libwayland-client0:amd64 Conflicts on libwayland0 [ amd64 ] < 1.0.5-0ubuntu1 > ( libs ) (< 1.1.0) Broken libunity9:amd64 Breaks on unity-common [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 > ( gnome ) (< 7.1.2) Broken cups-filters:amd64 Conflicts on ghostscript-cups [ amd64 ] < 9.07~dfsg2-0ubuntu3.1 > ( text ) Broken libpam-systemd:amd64 Conflicts on libpam-xdg-support [ amd64 ] < 0.2-0ubuntu2 > ( admin ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ amd64 ] < 0.9.13-1 > ( libs ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ i386 ] < 0.9.13-1 > ( libs ) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ amd64 ] < 6.90.2daily13.04.05-0ubuntu1 > ( gnome ) (< 7.0.7) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ i386 ] < none > ( none ) (< 7.0.7) Broken libaccount-plugin-generic-oauth:amd64 Conflicts on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libaccount-plugin-generic-oauth:amd64 Breaks on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libmutter0b:amd64 Breaks on libmutter0a [ amd64 ] < 3.6.3-0ubuntu2 > ( libs ) Broken python3-aptdaemon.pkcompat:amd64 Breaks on libpackagekit-glib2-14 [ amd64 ] < 0.7.6-3ubuntu1 > ( libs ) (<= 0.7.6-4) Broken apache2:amd64 Conflicts on apache2.2-common [ amd64 ] < 2.2.22-6ubuntu5.1 > ( httpd ) Broken chromium-codecs-ffmpeg-extra:amd64 Conflicts on chromium-codecs-ffmpeg [ amd64 ] < 28.0.1500.71-0ubuntu1.13.04.1 -> 29.0.1547.65-0ubuntu2 > ( universe/web ) Broken unity-scope-home:amd64 Conflicts on unity-lens-shopping [ amd64 ] < 6.8.0daily13.03.04-0ubuntu1 > ( gnome ) Broken libsnmp30:amd64 Breaks on libsnmp15 [ amd64 ] < 5.4.3~dfsg-2.7ubuntu1 > ( libs ) Broken apache2.2-bin:amd64 Breaks on gnome-user-share [ amd64 ] < 3.0.4-0ubuntu1 > ( gnome ) (< 3.8.0-2~) Broken libgjs0d:amd64 Conflicts on libgjs0c [ amd64 ] < 1.34.0-0ubuntu1 > ( libs ) Broken unity-gtk2-module:amd64 Conflicts on appmenu-gtk [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken lib32asound2:amd64 Depends on libasound2 [ amd64 ] < 1.0.25-4ubuntu3.1 -> 1.0.27.2-1ubuntu6 > ( libs ) (= 1.0.25-4ubuntu3.1) Broken unity-gtk3-module:amd64 Conflicts on appmenu-gtk3 [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken activity-log-manager:amd64 Conflicts on activity-log-manager-common [ amd64 ] < 0.9.4-0ubuntu6.2 > ( utils ) Broken libgtksourceview-3.0-0:amd64 Depends on libgtksourceview-3.0-common [ amd64 ] < 3.6.3-0ubuntu1 -> 3.8.2-0ubuntu1 > ( libs ) (< 3.7) Broken icaclient:amd64 Depends on lib32asound2 [ amd64 ] < 1.0.25-4ubuntu3.1 > ( libs ) Broken libunity-core-6.0-5:amd64 Depends on unity-services [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 -> 7.1.2+13.10.20131014.1-0ubuntu1 > ( gnome ) (= 7.0.0daily13.06.19~13.04-0ubuntu1) Broken libbamf3-1:amd64 Depends on bamfdaemon [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 -> 0.5.1+13.10.20131011-0ubuntu1 > ( libs ) (= 0.4.0daily13.06.19~13.04-0ubuntu1) Broken apache2-bin:amd64 Conflicts on apache2.2-bin [ amd64 ] < 2.2.22-6ubuntu5.1 -> 2.4.6-2ubuntu2 > ( httpd ) (< 2.3~) Output for cat /etc/apt/sources.list /etc/apt/sources.list.d/*.list # deb cdrom:[Ubuntu 13.04 _Raring Ringtail_ - Release amd64 (20130424)]/ raring main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://de.archive.ubuntu.com/ubuntu/ raring universe deb http://de.archive.ubuntu.com/ubuntu/ raring-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://de.archive.ubuntu.com/ubuntu/ raring multiverse deb http://de.archive.ubuntu.com/ubuntu/ raring-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu raring-security main restricted deb http://security.ubuntu.com/ubuntu raring-security universe deb http://security.ubuntu.com/ubuntu raring-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu raring partner # deb-src http://archive.canonical.com/ubuntu raring partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu raring main # deb-src http://extras.ubuntu.com/ubuntu raring main # deb http://linux.dropbox.com/ubuntu precise main output for sudo dpkg -l | grep -e "^iU" -e "^rc": rc ibm-lotus-cae 8.5.2-20100805.0821 i386 IBM Lotus Composite Application Editor rc ibm-lotus-cae-nl1 8.5.2-20100805.0821 i386 IBM Lotus CAE NL1 rc ibm-lotus-feedreader 8.5.2-20100805.0821 i386 Feeds for IBM Lotus Notes 8.5.2 rc ibm-lotus-feedreader-nl1 8.5.2-20100805.0821 i386 IBM Lotus Feed Reader NL1 rc ibm-lotus-notes 8.5.2-20100805.0821 i386 IBM Lotus Notes rc ibm-lotus-notes-core-de 8.5.2-20100805.0821 i386 IBM Lotus Notes Native German (de) rc ibm-lotus-notes-nl1 8.5.2-20100805.0821 i386 IBM Lotus Notes Java NL1 rc ibm-lotus-sametime 8.5.2-20100805.0821 i386 IBM Lotus Sametime rc ibm-lotus-symphony 8.5.2-20100805.0821 i386 IBM Lotus Symphony rc ibm-lotus-symphony-nl1 8.5.2-20100805.0821 i386 IBM Lotus Symphony NL1 rc libapache2-mod-php5filter 5.4.9-4ubuntu2.2 amd64 server-side, HTML-embedded scripting language (apache 2 filter module) rc libavcodec53:amd64 6:0.8.6-1ubuntu2 amd64 Libav codec library rc libavutil51:amd64 6:0.8.6-1ubuntu2 amd64 Libav utility library rc libmotif4:amd64 2.3.3-7ubuntu1 amd64 Open Motif - shared libraries rc linux-image-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP

Read the article

java: how to compress data into a String and uncompress data from the String

- by Guillaume

I want to put some compressed data into a remote repository. To put data on this repository I can only use a method that take the name of the resource and its content as a String. (like data.txt + "hello world"). The repository is moking a filesystem but is not, so I can not use File directly. I want to be able to do the following: client send to server a file 'data.txt' server compress 'data.txt' into data.zip server send to repository content of data.zip repository store data.zip client download from repository data.zip and his able to open it with its favorite zip tool I have tried a lots of compressing example found on the web but each time a send the data to the repository, my resulting zip file is corrupted. Here is a sample class, using the zip*stream and that emulate the repository showcasing my problem. The created zip file is working, but after its 'serialization' it's get corrupted. (the sample class use jakarta commons.io ) Many thanks for your help. package zip; import java.io.File; import java.io.FileInputStream; import java.io.FileOutputStream; import java.io.IOException; import java.io.InputStream; import java.util.zip.ZipEntry; import java.util.zip.ZipInputStream; import java.util.zip.ZipOutputStream; import org.apache.commons.io.FileUtils; /** * Date: May 19, 2010 - 6:13:07 PM * * @author Guillaume AME. */ public class ZipMe { public static void addOrUpdate(File zipFile, File ... files) throws IOException { File tempFile = File.createTempFile(zipFile.getName(), null); // delete it, otherwise you cannot rename your existing zip to it. tempFile.delete(); boolean renameOk = zipFile.renameTo(tempFile); if (!renameOk) { throw new RuntimeException("could not rename the file " + zipFile.getAbsolutePath() + " to " + tempFile.getAbsolutePath()); } byte[] buf = new byte[1024]; ZipInputStream zin = new ZipInputStream(new FileInputStream(tempFile)); ZipOutputStream out = new ZipOutputStream(new FileOutputStream(zipFile)); ZipEntry entry = zin.getNextEntry(); while (entry != null) { String name = entry.getName(); boolean notInFiles = true; for (File f : files) { if (f.getName().equals(name)) { notInFiles = false; break; } } if (notInFiles) { // Add ZIP entry to output stream. out.putNextEntry(new ZipEntry(name)); // Transfer bytes from the ZIP file to the output file int len; while ((len = zin.read(buf)) > 0) { out.write(buf, 0, len); } } entry = zin.getNextEntry(); } // Close the streams zin.close(); // Compress the files if (files != null) { for (File file : files) { InputStream in = new FileInputStream(file); // Add ZIP entry to output stream. out.putNextEntry(new ZipEntry(file.getName())); // Transfer bytes from the file to the ZIP file int len; while ((len = in.read(buf)) > 0) { out.write(buf, 0, len); } // Complete the entry out.closeEntry(); in.close(); } // Complete the ZIP file } tempFile.delete(); out.close(); } public static void main(String[] args) throws IOException { final String zipArchivePath = "c:/temp/archive.zip"; final String tempFilePath = "c:/temp/data.txt"; final String resultZipFile = "c:/temp/resultingArchive.zip"; File zipArchive = new File(zipArchivePath); FileUtils.touch(zipArchive); File tempFile = new File(tempFilePath); FileUtils.writeStringToFile(tempFile, "hello world"); addOrUpdate(zipArchive, tempFile); //archive.zip exists and contains a compressed data.txt that can be read using winrar //now simulate writing of the zip into a in memory cache String archiveText = FileUtils.readFileToString(zipArchive); FileUtils.writeStringToFile(new File(resultZipFile), archiveText); //resultingArchive.zip exists, contains a compressed data.txt, but it can not //be read using winrar: CRC failed in data.txt. The file is corrupt } }

Read the article

How do I create an instance of this class in Android?

- by Lloyd Banks

I was wondering if it is possible to create an instance of this class (from the link, which creates a listview) from another class so that I can call on either lazyadapter.java or customizedlistview.java (not sure which one) to inflate that same listview. Is this possible? This is what I tried (obviously incorrect): CustomizedListView clv = new CustomizedListView(); clv.onCreate(...); source: http://www.androidhive.info/2012/02/android-custom-listview-with-image-and-text/ LazyAdapter.java import java.util.ArrayList; import java.util.HashMap; import android.app.Activity; import android.content.Context; import android.view.LayoutInflater; import android.view.View; import android.view.ViewGroup; import android.widget.BaseAdapter; import android.widget.ImageView; import android.widget.TextView; public class LazyAdapter extends BaseAdapter { private Activity activity; private ArrayList<HashMap<String, String>> data; private static LayoutInflater inflater=null; public ImageLoader imageLoader; public LazyAdapter(Activity a, ArrayList<HashMap<String, String>> d) { activity = a; data=d; inflater = (LayoutInflater)activity.getSystemService(Context.LAYOUT_INFLATER_SERVICE); imageLoader=new ImageLoader(activity.getApplicationContext()); } public int getCount() { return data.size(); } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { View vi=convertView; if(convertView==null) vi = inflater.inflate(R.layout.list_row, null); TextView title = (TextView)vi.findViewById(R.id.title); // title TextView artist = (TextView)vi.findViewById(R.id.artist); // artist name TextView duration = (TextView)vi.findViewById(R.id.duration); // duration ImageView thumb_image=(ImageView)vi.findViewById(R.id.list_image); // thumb image HashMap<String, String> song = new HashMap<String, String>(); song = data.get(position); // Setting all values in listview title.setText(song.get(CustomizedListView.KEY_TITLE)); artist.setText(song.get(CustomizedListView.KEY_ARTIST)); duration.setText(song.get(CustomizedListView.KEY_DURATION)); imageLoader.DisplayImage(song.get(CustomizedListView.KEY_THUMB_URL), thumb_image); return vi; } } CustomizedListView.java import java.util.ArrayList; import java.util.HashMap; import org.w3c.dom.Document; import org.w3c.dom.Element; import org.w3c.dom.NodeList; import android.app.Activity; import android.os.Bundle; import android.view.View; import android.widget.AdapterView; import android.widget.AdapterView.OnItemClickListener; import android.widget.ListView; public class CustomizedListView extends Activity { // All static variables static final String URL = "http://api.androidhive.info/music/music.xml"; // XML node keys static final String KEY_SONG = "song"; // parent node static final String KEY_ID = "id"; static final String KEY_TITLE = "title"; static final String KEY_ARTIST = "artist"; static final String KEY_DURATION = "duration"; static final String KEY_THUMB_URL = "thumb_url"; ListView list; LazyAdapter adapter; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); ArrayList<HashMap<String, String>> songsList = new ArrayList<HashMap<String, String>>(); XMLParser parser = new XMLParser(); String xml = parser.getXmlFromUrl(URL); // getting XML from URL Document doc = parser.getDomElement(xml); // getting DOM element NodeList nl = doc.getElementsByTagName(KEY_SONG); // looping through all song nodes <song> for (int i = 0; i < nl.getLength(); i++) { // creating new HashMap HashMap<String, String> map = new HashMap<String, String>(); Element e = (Element) nl.item(i); // adding each child node to HashMap key => value map.put(KEY_ID, parser.getValue(e, KEY_ID)); map.put(KEY_TITLE, parser.getValue(e, KEY_TITLE)); map.put(KEY_ARTIST, parser.getValue(e, KEY_ARTIST)); map.put(KEY_DURATION, parser.getValue(e, KEY_DURATION)); map.put(KEY_THUMB_URL, parser.getValue(e, KEY_THUMB_URL)); // adding HashList to ArrayList songsList.add(map); } list=(ListView)findViewById(R.id.list); // Getting adapter by passing xml data ArrayList adapter=new LazyAdapter(this, songsList); list.setAdapter(adapter); // Click event for single list row list.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> parent, View view, int position, long id) { } }); } }

Read the article

Two-way databinding of a custom templated asp.net control

- by Jason

I hate long code snippets and I'm sorry about this one, but it turns out that this asp.net stuff can't get much shorter and it's so specific that I haven't been able to generalize it without a full code listing. I just want simple two-way, declarative, edit-only databinding to a single instance of an object. Not a list of objects of a type with a bunch of NotImplementedExceptions for Add, Delete, and Select, but just a single view-state persisted object. This is certainly something that can be done but I've struggled with an implementation for years. This newest, closest implementation was inspired by this article from 4-Guys-From-Rolla. Unfortunately, after implementing, I'm getting the following error and I don't know what I'm missing: System.InvalidOperationException: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control. If I don't use Bind(), and only use Eval() functionality, it works. In that way, the error is especially confusing. Update: Actually, using Eval() does NOT work, but using <%# Container.SampleString %> works. However, Eval("SampleString") gives the same error. That leads me back to this article I found earlier but had discarded. Now I believe it might be related, though I haven't cracked it yet ... Here's the simplified codeset that still produces the error: using System.ComponentModel; namespace System.Web.UI.WebControls.Special { public class SampleFormData { public string SampleString = "Sample String Data"; public int SampleInt = -1; } [ToolboxItem(false)] public class SampleSpecificFormDataContainer : DataBoundControl, INamingContainer { SampleSpecificEntryForm entryForm; internal SampleSpecificEntryForm EntryForm { get { return entryForm; } } [Bindable(true), Category("Data")] public string SampleString { get { return entryForm.FormData.SampleString; } set { entryForm.FormData.SampleString = value; } } [Bindable(true), Category("Data")] public int SampleInt { get { return entryForm.FormData.SampleInt; } set { entryForm.FormData.SampleInt = value; } } internal SampleSpecificFormDataContainer(SampleSpecificEntryForm entryForm) { this.entryForm = entryForm; } } public class SampleSpecificEntryForm : WebControl, INamingContainer { #region Template private IBindableTemplate formTemplate = null; [Browsable(false), DefaultValue(null), TemplateContainer(typeof(SampleSpecificFormDataContainer), ComponentModel.BindingDirection.TwoWay), PersistenceMode(PersistenceMode.InnerProperty)] public virtual IBindableTemplate FormTemplate { get { return formTemplate; } set { formTemplate = value; } } #endregion #region Viewstate SampleFormData FormDataVS { get { return (ViewState["FormData"] as SampleFormData) ?? new SampleFormData(); } set { ViewState["FormData"] = value; SaveViewState(); } } #endregion public override ControlCollection Controls { get { EnsureChildControls(); return base.Controls; } } private SampleSpecificFormDataContainer formDataContainer = null; [Browsable(false), DesignerSerializationVisibility(DesignerSerializationVisibility.Hidden)] public SampleSpecificFormDataContainer FormDataContainer { get { EnsureChildControls(); return formDataContainer; } } [Bindable(true), Browsable(false)] public SampleFormData FormData { get { return FormDataVS; } set { FormDataVS = value; } } protected override void CreateChildControls() { if (!this.ChildControlsCreated) { Controls.Clear(); formDataContainer = new SampleSpecificFormDataContainer(this); Controls.Add(formDataContainer); FormTemplate.InstantiateIn(formDataContainer); this.ChildControlsCreated = true; } } public override void DataBind() { CreateChildControls(); base.DataBind(); } } } With an ASP.NET page the following: <%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default2.aspx.cs" Inherits="EntryFormTest._Default2" EnableEventValidation="false" %> <%@ Register Assembly="EntryForm" Namespace="System.Web.UI.WebControls.Special" TagPrefix="cc1" %> <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> </asp:Content> <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> <h2> Welcome to ASP.NET! </h2> <cc1:SampleSpecificEntryForm ID="EntryForm1" runat="server"> <FormTemplate> <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("SampleString") %>'></asp:TextBox><br /> <h3>(<%# Container.SampleString %>)</h3><br /> <asp:Button ID="Button1" runat="server" Text="Button" /> </FormTemplate> </cc1:SampleSpecificEntryForm> </asp:Content> Default2.aspx.cs using System; namespace EntryFormTest { public partial class _Default2 : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { EntryForm1.DataBind(); } } } Thanks for any help!

Read the article

10 tape technology features that make you go hmm.

- by Karoly Vegh

A week ago an Oracle/StorageTek Tape Specialist, Christian Vanden Balck, visited Vienna, and agreed to visit customers to do techtalks and update them about the technology boom going around tape. I had the privilege to attend some of his sessions and noted the information and features that took the customers by surprise and made them think. Allow me to share the top 10: I. StorageTek as a brand: StorageTek is one of he strongest names in the Tape field. The brand itself was valued so much by customers that even after Sun Microsystems acquiring StorageTek and the Oracle acquiring Sun the brand lives on with all the Oracle tapelibraries are officially branded StorageTek.See http://www.oracle.com/us/products/servers-storage/storage/tape-storage/overview/index.html II. Disk information density limitations: Disk technology struggles with information density. You haven't seen the disk sizes exploding lately, have you? That's partly because there are physical limits on a disk platter. The size is given, the number of platters is limited, they just can't grow, and are running out of physical area to write to. Now, in a T10000C tape cartridge we have over 1000m long tape. There you go, you have got your physical space and don't need to stuff all that data crammed together. You can write in a reliable pattern, and have space to grow too. III. Oracle has a market share of 62% worldwide in recording head manufacturing. That's right. If you are running LTO drives, with a good chance you rely on StorageTek production. That's two out of three LTO recording heads produced worldwide. IV. You can store 1 Exabyte data in a single tape library. Yes, an Exabyte. That is 1000 Petabytes. Or, a million Terabytes. A thousand million GigaBytes. You can store that in a stacked StorageTek SL8500 tapelibrary. In one SL8500 you can put 10.000 T10000C cartridges, that store 10TB data (compressed). You can stack 10 of these SL8500s together. Boom. 1000.000 TB.(n.b.: stacking means interconnecting the libraries. Yes, cartridges are moved between the stacked libraries automatically.) V. EMC: 'Tape doesn't suck after all. We moved on.': Do you remember the infamous 'Tape sucks, move on' Datadomain slogan? Of course they had to put it that way, having only had disk products. But here's a fun fact: on the EMCWorld 2012 there was a major presence of a Tape-tech company - EMC, in a sudden burst of sanity is embracing tape again. VI. The miraculous T10000C: Oracle StorageTek has developed an enterprise-grade tapedrive and cartridge, the T10000C. With awesome numbers: The Cartridge: Native 5TB capacity, 10TB with compression Over a kilometer long tape within the cartridge. And it's locked when unmounted, no rattling of your data. Replaced the metalparticles datalayer with BaFe (bariumferrite) - metalparticles lose around 7% of magnetism within 30 days. BaFe does not. Yes we employ solid-state physicists doing R&D on demagnetisation in our labs. Can be partitioned, storage tiering within the cartridge! The Drive: 2GB Cache Encryption implemented in HW - no performance hit 252 MB/s native sustained data rate, beats disk technology by far. Not to mention peak throughput. Leading the tape while never touching the data side of it, protecting your data physically too Data integritiy checking (CRC recalculation) on tape within the drive without having to read it back to the server reordering data from tape-order, delivering it back in application-order writing 32 tracks at once, reading them back for CRC check at once VII. You only use 20% of your data on a regular basis. The rest 80% is just lying around for years. On continuously spinning disks. Doubly consuming energy (power+cooling), blocking diskstorage capacity. There is a solution called SAM (Storage Archive Manager) that provides you a filesystem unifying disk and tape, moving data on-demand and for clients transparently between the different storage tiers. You can share these filesystems with NFS or CIFS for clients, and enjoy the low TCO of tape. Tapes don't spin. They sit quietly in their slots, storing 10TB data, using no energy, producing no heat, automounted when a client accesses their data.See: http://www.oracle.com/us/products/servers-storage/storage/storage-software/storage-archive-manager/overview/index.html VIII. HW supported for three decades: Did you know that the original PowderHorn library was released in '87 and has been only discontinued in 2010? That is over two decades of supported operation. Tape libraries are - just like the data carrying on tapecartridges - built for longevity. Oh, and the T10000C cartridge has 30-year archival life for long-term retention. IX. Tape is easy to manage: Have you heard of Tape Storage Analytics? It is a central graphical tool to summarize, monitor, analyze dataflow, health and performance of drives and libraries, see: http://www.oracle.com/us/products/servers-storage/storage/tape-storage/tape-analytics/overview/index.html X. The next generation: The T10000B drives were able to reuse the T10000A cartridges and write on them even more data. On the same cartridges. We call this investment protection, and this is very important for Oracle for the future too. We usually support two generations of cartridges together. The current drive is a T10000C. (...I know I promised to enlist 10, but I got still two more I really want to mention. Allow me to work around the problem: ) X++. The TallBots, the robots moving around the cartridges in the StorageTek library from tapeslots to the drives are cableless. Cables, belts, chains running to moving parts in a library cause maintenance downtimes. So StorageTek eliminated them. The TallBots get power, commands, even firmwareupgrades through the rails they are running on. Also, the TallBots don't just hook'n'pull the tapes out of their slots, they actually grip'n'lift them out. No friction, no scratches, no zillion little plastic particles floating around in the library, in the drives, on your data. (X++)++: Tape beats SSDs and Disks. In terms of throughput (252 MB/s), in terms of TCO: disks cause around 290x more power and cooling, in terms of capacity: 10TB on a single media and soon more. So... do you need to store large amounts of data? Are you legally bound to archive it for dozens of years? Would you benefit from automatic storage tiering? Have you got large mediachunks to be streamed at times? Have you got power and cooling issues in the growing datacenters? Do you find EMC's 180° turn of tape attitude interesting, but appreciate it at the same time? With all that, you aren't alone. The most data on this planet is stored on tape. Tape is coming. Big time.

Read the article

MVVM - implementing 'IsDirty' functionality to a ModelView in order to save data

- by Brendan

Hi, Being new to WPF & MVVM I struggling with some basic functionality. Let me first explain what I am after, and then attach some example code... I have a screen showing a list of users, and I display the details of the selected user on the right-hand side with editable textboxes. I then have a Save button which is DataBound, but I would only like this button to display when data has actually changed. ie - I need to check for "dirty data". I have a fully MVVM example in which I have a Model called User: namespace Test.Model { class User { public string UserName { get; set; } public string Surname { get; set; } public string Firstname { get; set; } } } Then, the ViewModel looks like this: using System.Collections.ObjectModel; using System.Collections.Specialized; using System.Windows.Input; using Test.Model; namespace Test.ViewModel { class UserViewModel : ViewModelBase { //Private variables private ObservableCollection<User> _users; RelayCommand _userSave; //Properties public ObservableCollection<User> User { get { if (_users == null) { _users = new ObservableCollection<User>(); //I assume I need this Handler, but I am stuggling to implement it successfully //_users.CollectionChanged += HandleChange; //Populate with users _users.Add(new User {UserName = "Bob", Firstname="Bob", Surname="Smith"}); _users.Add(new User {UserName = "Smob", Firstname="John", Surname="Davy"}); } return _users; } } //Not sure what to do with this?!?! //private void HandleChange(object sender, NotifyCollectionChangedEventArgs e) //{ // if (e.Action == NotifyCollectionChangedAction.Remove) // { // foreach (TestViewModel item in e.NewItems) // { // //Removed items // } // } // else if (e.Action == NotifyCollectionChangedAction.Add) // { // foreach (TestViewModel item in e.NewItems) // { // //Added items // } // } //} //Commands public ICommand UserSave { get { if (_userSave == null) { _userSave = new RelayCommand(param => this.UserSaveExecute(), param => this.UserSaveCanExecute); } return _userSave; } } void UserSaveExecute() { //Here I will call my DataAccess to actually save the data } bool UserSaveCanExecute { get { //This is where I would like to know whether the currently selected item has been edited and is thus "dirty" return false; } } //constructor public UserViewModel() { } } } The "RelayCommand" is just a simple wrapper class, as is the "ViewModelBase". (I'll attach the latter though just for clarity) using System; using System.ComponentModel; namespace Test.ViewModel { public abstract class ViewModelBase : INotifyPropertyChanged, IDisposable { protected ViewModelBase() { } public event PropertyChangedEventHandler PropertyChanged; protected virtual void OnPropertyChanged(string propertyName) { PropertyChangedEventHandler handler = this.PropertyChanged; if (handler != null) { var e = new PropertyChangedEventArgs(propertyName); handler(this, e); } } public void Dispose() { this.OnDispose(); } protected virtual void OnDispose() { } } } Finally - the XAML <Window x:Class="Test.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:vm="clr-namespace:Test.ViewModel" Title="MainWindow" Height="350" Width="525"> <Window.DataContext> <vm:UserViewModel/> </Window.DataContext> <Grid> <ListBox Height="238" HorizontalAlignment="Left" Margin="12,12,0,0" Name="listBox1" VerticalAlignment="Top" Width="197" ItemsSource="{Binding Path=User}" IsSynchronizedWithCurrentItem="True"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel> <TextBlock Text="{Binding Path=Firstname}"/> <TextBlock Text="{Binding Path=Surname}"/> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> <Label Content="Username" Height="28" HorizontalAlignment="Left" Margin="232,16,0,0" Name="label1" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,21,0,0" Name="textBox1" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/UserName}" /> <Label Content="Surname" Height="28" HorizontalAlignment="Left" Margin="232,50,0,0" Name="label2" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,52,0,0" Name="textBox2" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/Surname}" /> <Label Content="Firstname" Height="28" HorizontalAlignment="Left" Margin="232,84,0,0" Name="label3" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,86,0,0" Name="textBox3" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/Firstname}" /> <Button Content="Button" Height="23" HorizontalAlignment="Left" Margin="368,159,0,0" Name="button1" VerticalAlignment="Top" Width="75" Command="{Binding Path=UserSave}" /> </Grid> </Window> So basically, when I edit a surname, the Save button should be enabled; and if I undo my edit - well then it should be Disabled again as nothing has changed. I have seen this in many examples, but have not yet found out how to do it. Any help would be much appreciated! Brendan

Read the article

Converting Encrypted Values

- by Johnm

Your database has been protecting sensitive data at rest using the cell-level encryption features of SQL Server for quite sometime. The employees in the auditing department have been inviting you to their after-work gatherings and buying you drinks. Thousands of customers implicitly include you in their prayers of thanks giving as their identities remain safe in your company's database. The cipher text resting snuggly in a column of the varbinary data type is great for security; but it can create some interesting challenges when interacting with other data types such as the XML data type. The XML data type is one that is often used as a message type for the Service Broker feature of SQL Server. It also can be an interesting data type to capture for auditing or integrating with external systems. The challenge that cipher text presents is that the need for decryption remains even after it has experienced its XML metamorphosis. Quite an interesting challenge nonetheless; but fear not. There is a solution. To simulate this scenario, we first will want to create a plain text value for us to encrypt. We will do this by creating a variable to store our plain text value: -- set plain text value DECLARE @PlainText NVARCHAR(255); SET @PlainText = 'This is plain text to encrypt'; The next step will be to create a variable that will store the cipher text that is generated from the encryption process. We will populate this variable by using a pre-defined symmetric key and certificate combination: -- encrypt plain text value DECLARE @CipherText VARBINARY(MAX); OPEN SYMMETRIC KEY SymKey DECRYPTION BY CERTIFICATE SymCert WITH PASSWORD='mypassword2010'; SET @CipherText = EncryptByKey ( Key_GUID('SymKey'), @PlainText ); CLOSE ALL SYMMETRIC KEYS; The value of our newly generated cipher text is 0x006E12933CBFB0469F79ABCC79A583--. This will be important as we reference our cipher text later in this post. Our final step in preparing our scenario is to create a table variable to simulate the existence of a table that contains a column used to hold encrypted values. Once this table variable has been created, populate the table variable with the newly generated cipher text: -- capture value in table variable DECLARE @tbl TABLE (EncVal varbinary(MAX)); INSERT INTO @tbl (EncVal) VALUES (@CipherText); We are now ready to experience the challenge of capturing our encrypted column in an XML data type using the FOR XML clause: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT EncVal FROM @tbl AS MYTABLE FOR XML AUTO, BINARY BASE64, ROOT('root')); If you add the SELECT @XML statement at the end of this portion of the code you will see the contents of the XML data in its raw format: <root> <MYTABLE EncVal="AG4Skzy/sEafeavMeaWDBwEAAACE--" /> </root> Strangely, the value that is captured appears nothing like the value that was created through the encryption process. The result being that when this XML is converted into a readable data set the encrypted value will not be able to be decrypted, even with access to the symmetric key and certificate used to perform the decryption. An immediate thought might be to convert the varbinary data type to either a varchar or nvarchar before creating the XML data. This approach makes good sense. The code for this might look something like the following: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT CONVERT(NVARCHAR(MAX),EncVal) AS EncVal FROM @tbl AS MYTABLE FOR XML AUTO, BINARY BASE64, ROOT('root')); However, this results in the following error: Msg 9420, Level 16, State 1, Line 26 XML parsing: line 1, character 37, illegal xml character A quick query that returns CONVERT(NVARCHAR(MAX),EncVal) reveals that the value that is causing the error looks like something off of a genuine Chinese menu. While this situation does present us with one of those spine-tingling, expletive-generating challenges, rest assured that this approach is on the right track. With the addition of the "style" argument to the CONVERT method, our solution is at hand. When dealing with converting varbinary data types we have three styles available to us: - The first is to not include the style parameter, or use the value of "0". As we see, this style will not work for us. - The second option is to use the value of "1" will keep our varbinary value including the "0x" prefix. In our case, the value will be 0x006E12933CBFB0469F79ABCC79A583-- - The third option is to use the value of "2" which will chop the "0x" prefix off of our varbinary value. In our case, the value will be 006E12933CBFB0469F79ABCC79A583-- Since we will want to convert this back to varbinary when reading this value from the XML data we will want the "0x" prefix, so we will want to change our code as follows: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT CONVERT(NVARCHAR(MAX),EncVal,1) AS EncVal FROM @tbl AS MYTABLE FOR XML AUTO, BINARY BASE64, ROOT('root')); Once again, with the inclusion of the SELECT @XML statement at the end of this portion of the code you will see the contents of the XML data in its raw format: <root> <MYTABLE EncVal="0x006E12933CBFB0469F79ABCC79A583--" /> </root> Nice! We are now cooking with gas. To continue our scenario, we will want to parse the XML data into a data set so that we can glean our freshly captured cipher text. Once we have our cipher text snagged we will capture it into a variable so that it can be used during decryption: -- read back xml DECLARE @hdoc INT; DECLARE @EncVal NVARCHAR(MAX); EXEC sp_xml_preparedocument @hDoc OUTPUT, @xml; SELECT @EncVal = EncVal FROM OPENXML (@hdoc, '/root/MYTABLE') WITH ([EncVal] VARBINARY(MAX) '@EncVal'); EXEC sp_xml_removedocument @hDoc; Finally, the decryption of our cipher text using the DECRYPTBYKEYAUTOCERT method and the certificate utilized to perform the encryption earlier in our exercise: SELECT CONVERT(NVARCHAR(MAX), DecryptByKeyAutoCert ( CERT_ID('AuditLogCert'), N'mypassword2010', @EncVal ) ) EncVal; Ah yes, another hurdle presents itself! The decryption produced the value of NULL which in cryptography means that either you don't have permissions to decrypt the cipher text or something went wrong during the decryption process (ok, sometimes the value is actually NULL; but not in this case). As we see, the @EncVal variable is an nvarchar data type. The third parameter of the DECRYPTBYKEYAUTOCERT method requires a varbinary value. Therefore we will need to utilize our handy-dandy CONVERT method: SELECT CONVERT(NVARCHAR(MAX), DecryptByKeyAutoCert ( CERT_ID('AuditLogCert'), N'mypassword2010', CONVERT(VARBINARY(MAX),@EncVal) ) ) EncVal; Oh, almost. The result remains NULL despite our conversion to the varbinary data type. This is due to the creation of an varbinary value that does not reflect the actual value of our @EncVal variable; but rather a varbinary conversion of the variable itself. In this case, something like 0x3000780030003000360045003--. Considering the "style" parameter got us past XML challenge, we will want to consider its power for this challenge as well. Knowing that the value of "1" will provide us with the actual value including the "0x", we will opt to utilize that value in this case: SELECT CONVERT(NVARCHAR(MAX), DecryptByKeyAutoCert ( CERT_ID('SymCert'), N'mypassword2010', CONVERT(VARBINARY(MAX),@EncVal,1) ) ) EncVal; Bingo, we have success! We have discovered what happens with varbinary data when captured as XML data. We have figured out how to make this data useful post-XML-ification. Best of all we now have a choice in after-work parties now that our very happy client who depends on our XML based interface invites us for dinner in celebration. All thanks to the effective use of the style parameter.

Read the article

java: how to get a string representation of a compressed byte array ?

- by Guillaume

I want to put some compressed data into a remote repository. To put data on this repository I can only use a method that take the name of the resource and its content as a String. (like data.txt + "hello world"). The repository is moking a filesystem but is not, so I can not use File directly. I want to be able to do the following: client send to server a file 'data.txt' server compress 'data.txt' into a compressed file 'data.zip' server send a string representation of data.zip to the repository repository store data.zip client download from repository data.zip and his able to open it with its favorite zip tool The problem arise at step 3 when I try to get a string representation of my compressed file. Here is a sample class, using the zip*stream and that emulate the repository showcasing my problem. The created zip file is working, but after its 'serialization' it's get corrupted. (the sample class use jakarta commons.io ) Many thanks for your help. package zip; import java.io.File; import java.io.FileInputStream; import java.io.FileOutputStream; import java.io.IOException; import java.io.InputStream; import java.util.zip.ZipEntry; import java.util.zip.ZipInputStream; import java.util.zip.ZipOutputStream; import org.apache.commons.io.FileUtils; /** * Date: May 19, 2010 - 6:13:07 PM * * @author Guillaume AME. */ public class ZipMe { public static void addOrUpdate(File zipFile, File ... files) throws IOException { File tempFile = File.createTempFile(zipFile.getName(), null); // delete it, otherwise you cannot rename your existing zip to it. tempFile.delete(); boolean renameOk = zipFile.renameTo(tempFile); if (!renameOk) { throw new RuntimeException("could not rename the file " + zipFile.getAbsolutePath() + " to " + tempFile.getAbsolutePath()); } byte[] buf = new byte[1024]; ZipInputStream zin = new ZipInputStream(new FileInputStream(tempFile)); ZipOutputStream out = new ZipOutputStream(new FileOutputStream(zipFile)); ZipEntry entry = zin.getNextEntry(); while (entry != null) { String name = entry.getName(); boolean notInFiles = true; for (File f : files) { if (f.getName().equals(name)) { notInFiles = false; break; } } if (notInFiles) { // Add ZIP entry to output stream. out.putNextEntry(new ZipEntry(name)); // Transfer bytes from the ZIP file to the output file int len; while ((len = zin.read(buf)) > 0) { out.write(buf, 0, len); } } entry = zin.getNextEntry(); } // Close the streams zin.close(); // Compress the files if (files != null) { for (File file : files) { InputStream in = new FileInputStream(file); // Add ZIP entry to output stream. out.putNextEntry(new ZipEntry(file.getName())); // Transfer bytes from the file to the ZIP file int len; while ((len = in.read(buf)) > 0) { out.write(buf, 0, len); } // Complete the entry out.closeEntry(); in.close(); } // Complete the ZIP file } tempFile.delete(); out.close(); } public static void main(String[] args) throws IOException { final String zipArchivePath = "c:/temp/archive.zip"; final String tempFilePath = "c:/temp/data.txt"; final String resultZipFile = "c:/temp/resultingArchive.zip"; File zipArchive = new File(zipArchivePath); FileUtils.touch(zipArchive); File tempFile = new File(tempFilePath); FileUtils.writeStringToFile(tempFile, "hello world"); addOrUpdate(zipArchive, tempFile); //archive.zip exists and contains a compressed data.txt that can be read using winrar //now simulate writing of the zip into a in memory cache String archiveText = FileUtils.readFileToString(zipArchive); FileUtils.writeStringToFile(new File(resultZipFile), archiveText); //resultingArchive.zip exists, contains a compressed data.txt, but it can not //be read using winrar: CRC failed in data.txt. The file is corrupt } }

Read the article

Jquery Live Function

- by marharépa

Hi! I want to make this script to work as LIVE() function. Please help me! $(".img img").each(function() { $(this).cjObjectScaler({ destElem: $(this).parent(), method: "fit" }); }); the cjObjectScaler script (called in the html header) is this: (thanks for Doug Jones) (function ($) { jQuery.fn.imagesLoaded = function (callback) { var elems = this.filter('img'), len = elems.length; elems.bind('load', function () { if (--len <= 0) { callback.call(elems, this); } }).each(function () { // cached images don't fire load sometimes, so we reset src. if (this.complete || this.complete === undefined) { var src = this.src; // webkit hack from http://groups.google.com/group/jquery-dev/browse_thread/thread/eee6ab7b2da50e1f this.src = '#'; this.src = src; } }); }; })(jQuery); /* CJ Object Scaler */ (function ($) { jQuery.fn.cjObjectScaler = function (options) { /* user variables (settings) ***************************************/ var settings = { // must be a jQuery object method: "fill", // the parent object to scale our object into destElem: null, // fit|fill fade: 0 // if positive value, do hide/fadeIn }; /* system variables ***************************************/ var sys = { // function parameters version: '2.1.1', elem: null }; /* scale the image ***************************************/ function scaleObj(obj) { // declare some local variables var destW = jQuery(settings.destElem).width(), destH = jQuery(settings.destElem).height(), ratioX, ratioY, scale, newWidth, newHeight, borderW = parseInt(jQuery(obj).css("borderLeftWidth"), 10) + parseInt(jQuery(obj).css("borderRightWidth"), 10), borderH = parseInt(jQuery(obj).css("borderTopWidth"), 10) + parseInt(jQuery(obj).css("borderBottomWidth"), 10), objW = jQuery(obj).width(), objH = jQuery(obj).height(); // check for valid border values. IE takes in account border size when calculating width/height so just set to 0 borderW = isNaN(borderW) ? 0 : borderW; borderH = isNaN(borderH) ? 0 : borderH; // calculate scale ratios ratioX = destW / jQuery(obj).width(); ratioY = destH / jQuery(obj).height(); // Determine which algorithm to use if (!jQuery(obj).hasClass("cf_image_scaler_fill") && (jQuery(obj).hasClass("cf_image_scaler_fit") || settings.method === "fit")) { scale = ratioX < ratioY ? ratioX : ratioY; } else if (!jQuery(obj).hasClass("cf_image_scaler_fit") && (jQuery(obj).hasClass("cf_image_scaler_fill") || settings.method === "fill")) { scale = ratioX < ratioY ? ratioX : ratioY; } // calculate our new image dimensions newWidth = parseInt(jQuery(obj).width() * scale, 10) - borderW; newHeight = parseInt(jQuery(obj).height() * scale, 10) - borderH; // Set new dimensions & offset jQuery(obj).css({ "width": newWidth + "px", "height": newHeight + "px"//, // "position": "absolute", // "top": (parseInt((destH - newHeight) / 2, 10) - parseInt(borderH / 2, 10)) + "px", // "left": (parseInt((destW - newWidth) / 2, 10) - parseInt(borderW / 2, 10)) + "px" }).attr({ "width": newWidth, "height": newHeight }); // do our fancy fade in, if user supplied a fade amount if (settings.fade > 0) { jQuery(obj).fadeIn(settings.fade); } } /* set up any user passed variables ***************************************/ if (options) { jQuery.extend(settings, options); } /* main ***************************************/ return this.each(function () { sys.elem = this; // if they don't provide a destObject, use parent if (settings.destElem === null) { settings.destElem = jQuery(sys.elem).parent(); } // need to make sure the user set the parent's position. Things go bonker's if not set. // valid values: absolute|relative|fixed if (jQuery(settings.destElem).css("position") === "static") { jQuery(settings.destElem).css({ "position": "relative" }); } // if our object to scale is an image, we need to make sure it's loaded before we continue. if (typeof sys.elem === "object" && typeof settings.destElem === "object" && typeof settings.method === "string") { // if the user supplied a fade amount, hide our image if (settings.fade > 0) { jQuery(sys.elem).hide(); } if (sys.elem.nodeName === "IMG") { // to fix the weird width/height caching issue we set the image dimensions to be auto; jQuery(sys.elem).width("auto"); jQuery(sys.elem).height("auto"); // wait until the image is loaded before scaling jQuery(sys.elem).imagesLoaded(function () { scaleObj(this); }); } else { scaleObj(jQuery(sys.elem)); } } else { console.debug("CJ Object Scaler could not initialize."); return; } }); }; })(jQuery);

Read the article

Real World Nuget

- by JoshReuben

Why Nuget A higher level of granularity for managing references When you have solutions of many projects that depend on solutions of many projects etc à escape from Solution Hell. Links · Using A GUI (Package Explorer) to build packages - http://docs.nuget.org/docs/creating-packages/using-a-gui-to-build-packages · Creating a Nuspec File - http://msdn.microsoft.com/en-us/vs2010trainingcourse_aspnetmvcnuget_topic2.aspx · consuming a Nuget Package - http://msdn.microsoft.com/en-us/vs2010trainingcourse_aspnetmvcnuget_topic3 · Nuspec reference - http://docs.nuget.org/docs/reference/nuspec-reference · updating packages - http://nuget.codeplex.com/wikipage?title=Updating%20All%20Packages · versioning - http://docs.nuget.org/docs/reference/versioning POC Folder Structure POC Setup Steps · Install package explorer · Source o Create a source solution – configure output directory for projects (Project > Properties > Build > Output Path) · Package o Add assemblies to package from output directory (D&D)- add net folder o File > Export – save .nuspec files and lib contents <?xml version="1.0" encoding="utf-16"?> <package > <metadata> <id>MyPackage</id> <version>1.0.0.3</version> <title /> <authors>josh-r</authors> <owners /> <requireLicenseAcceptance>false</requireLicenseAcceptance> <description>My package description.</description> <summary /> </metadata> </package> o File > Save – saves .nupkg file · Create Target Solution o In Tools > Options: Configure package source & Add package Select projects: Output from package manager (powershell console) ------- Installing...MyPackage 1.0.0 ------- Added file 'NugetSource.AssemblyA.dll' to folder 'MyPackage.1.0.0\lib'. Added file 'NugetSource.AssemblyA.pdb' to folder 'MyPackage.1.0.0\lib'. Added file 'NugetSource.AssemblyB.dll' to folder 'MyPackage.1.0.0\lib'. Added file 'NugetSource.AssemblyB.pdb' to folder 'MyPackage.1.0.0\lib'. Added file 'MyPackage.1.0.0.nupkg' to folder 'MyPackage.1.0.0'. Successfully installed 'MyPackage 1.0.0'. Added reference 'NugetSource.AssemblyA' to project 'AssemblyX' Added reference 'NugetSource.AssemblyB' to project 'AssemblyX' Added file 'packages.config'. Added file 'packages.config' to project 'AssemblyX' Added file 'repositories.config'. Successfully added 'MyPackage 1.0.0' to AssemblyX. ============================== o Packages folder created at solution level o Packages.config file generated in each project: <?xml version="1.0" encoding="utf-8"?> <packages> <package id="MyPackage" version="1.0.0" targetFramework="net40" /> </packages> A local Packages folder is created for package versions installed: Each folder contains the downloaded .nupkg file and its unpacked contents – eg of dlls that the project references Note: this folder is not checked in UpdatePackages o Configure Package Manager to automatically check for updates o Browse packages - It automatically picked up the updates Update Procedure · Modify source · Change source version in assembly info · Build source · Open last package in package explorer · Increment package version number and re-add assemblies · Save package with new version number and export its definition · In target solution – Tools > Manage Nuget Packages – click on All to trigger refresh , then click on recent packages to see updates · If problematic, delete packages folder Versioning uninstall-package mypackage install-package mypackage –version 1.0.0.3 uninstall-package mypackage install-package mypackage –version 1.0.0.4 Dependencies · <?xml version="1.0" encoding="utf-16"?> <package xmlns="http://schemas.microsoft.com/packaging/2012/06/nuspec.xsd"> <metadata> <id>MyDependentPackage</id> <version>1.0.0</version> <title /> <authors>josh-r</authors> <owners /> <requireLicenseAcceptance>false</requireLicenseAcceptance> <description>My package description.</description> <dependencies> <group targetFramework=".NETFramework4.0"> <dependency id="MyPackage" version="1.0.0.4" /> </group> </dependencies> </metadata> </package> Using NuGet without committing packages to source control http://docs.nuget.org/docs/workflows/using-nuget-without-committing-packages Right click on the Solution node in Solution Explorer and select Enable NuGet Package Restore. — Recall that packages folder is not part of solution If you get downloading package ‘Nuget.build’ failed, config proxy to support certificate for https://nuget.org/api/v2/ & allow unrestricted access to packages.nuget.org To test connectivity: get-package –listavailable To test Nuget Package Restore – delete packages folder and open vs as admin. In nugget msbuild: <Import Project="$(SolutionDir)\.nuget\nuget.targets" /> TFSBuild Integration Modify Nuget.Targets file <RestorePackages Condition=" '$(RestorePackages)' == '' "> True </RestorePackages> … <PackageSource Include="\\IL-CV-004-W7D\Packages" /> Add System Environment variable EnableNuGetPackageRestore=true & restart the “visual studio team foundation build service host” service. Important: Ensure Network Service has access to Packages folder Nugetter TFS Build integration Add Nugetter build process templates to TFS source control For Build Controller - Specify location of custom assemblies Generate .nuspec file from Package Explorer: File > Export Edit the file elements – remove path info from src and target attributes <?xml version="1.0" encoding="utf-16"?> <package xmlns="http://schemas.microsoft.com/packaging/2012/06/nuspec.xsd"> <metadata> <id>Common</id> <version>1.0.0</version> <title /> <authors>josh-r</authors> <owners /> <requireLicenseAcceptance>false</requireLicenseAcceptance> <description>My package description.</description> <dependencies> <group targetFramework=".NETFramework3.5" /> </dependencies> </metadata> <files> <file src="CommonTypes.dll" target="CommonTypes.dll" /> <file src="CommonTypes.pdb" target="CommonTypes.pdb" /> … Add .nuspec file to solution so that it is available for build: Dev\NovaNuget\Common\NuSpec\common.1.0.0.nuspec Add a Build Process Definition based on the Nugetter build process template: Configure the build process – specify: · .sln to build · Base path (output directory) · Nuget.exe file path · .nuspec file path Copy DLLs to a binary folder 1) Set copy local for an assembly reference to false 2) MSBuild Copy Task – modify .csproj file: http://msdn.microsoft.com/en-us/library/3e54c37h.aspx <ItemGroup> <MySourceFiles Include="$(MSBuildProjectDirectory)\..\SourceAssemblies\**\*.*" /> </ItemGroup> <Target Name="BeforeBuild"> <Copy SourceFiles="@(MySourceFiles)" DestinationFolder="bin\debug\SourceAssemblies" /> </Target> 3) Set Probing assembly search path from app.config - http://msdn.microsoft.com/en-us/library/823z9h8w(v=vs.80).aspx - <?xml version="1.0" encoding="utf-8" ?> <configuration> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <probing privatePath="SourceAssemblies"/> </assemblyBinding> </runtime> </configuration> Forcing 'copy local = false' The following generic powershell script was added to the packages install.ps1: param($installPath, $toolsPath, $package, $project) if( $project.Object.Project.Name -ne "CopyPackages") { $asms = $package.AssemblyReferences | %{$_.Name} foreach ($reference in $project.Object.References) { if ($asms -contains $reference.Name + ".dll") { $reference.CopyLocal = $false; } } } An empty project named "CopyPackages" was added to the solution - it references all the packages and is the only one set to CopyLocal="true". No MSBuild knowledge required.

Read the article

Problems in php coding

- by anwar

Hi there everyone im new to PHP and Joomla and I have developed a component in Joomla but my code is giving me errors. I have tried to solve the problem but I’am unable to solve it. So can anyone suggest me what is the problem with my code? Thanks in advance. Here are my two files: 1st view.html.php defined('_JEXEC') or die('=;)'); jimport('joomla.application.component.view'); class namnamViewlistrestaurant extends JView { function display($tpl = null) { $item = 'item'; RestUser::RestrictDirectAccess(); //-- Custom css JHTML::stylesheet( 'style.css', 'components/com_namnam/assets/css/' ); $cuisine=Lookups::getLookup('cuisine'); $lists['cuisine'] = JHTML::_('select.genericlist', $cuisine, 'idcuisine[]', 'class="inputbox" size="7"', 'value', 'text', $item->idcuisine); $category=Lookups::getLookup('restcategory'); $lists['category'] = JHTML::_('select.genericlist', $category, 'idcategory[]', 'class="inputbox" multiple="multiple" size="7"', 'value', 'text', $item->idcategory); $items = & $this->get('Data'); $pagination =& $this->get('Pagination'); $lists = & $this->get('List'); $this->assignRef('items', $items); $this->assignRef('pagination', $pagination); $this->assignRef('lists', $lists); parent::display($tpl); }//function }//class And 2nd is listrestaurant.php defined('_JEXEC') or die('=;)'); jimport('joomla.application.component.model'); class namnamModellistrestaurant extends JModel { var $_data; var $_total = null; var $_pagination = null; function __construct() { parent::__construct(); global $mainframe, $option; $limit = $mainframe->getUserStateFromRequest( 'global.list.limit', 'limit', $mainframe->getCfg('list_limit'), 'int' ); $limitstart = $mainframe->getUserStateFromRequest( $option.'.limitstart', 'limitstart', 0, 'int' ); $limitstart = ($limit != 0 ? (floor($limitstart / $limit) * $limit) : 0); $this->setState('limit', $limit); $this->setState('limitstart', $limitstart); } function _buildQuery() { $where = array(); $where[]=" idowner=".RestUser::getUserID()." "; if ($this->search) { $where[] = 'LOWER(name) LIKE \''. $this->search. '\''; } $where =( count($where) ) ? ' WHERE ' . implode( ' AND ', $where ) : ''; $orderby = ''; #_ECR_MAT_FILTER_MODEL1_ if (($this->filter_order) && ($this->filter_order_Dir)) { $orderby = ' ORDER BY '. $this->filter_order .' '. $this->filter_order_Dir; } $this->_query = ' SELECT *' . ' FROM #__namnam_restaurants ' . $where . $orderby ; return $this->_query; } function getData() { if (empty($this->_data)) { $query = $this->_buildQuery(); $this->_data = $this->_getList($query, $this->getState('limitstart'), $this->getState('limit')); } return $this->_data; } function getList() { // table ordering $lists['order_Dir'] = $this->filter_order_Dir; $lists['order'] = $this->filter_order; // search filter $lists['search']= $this->search; return $lists; } function getTotal() { // Load the content if it doesn't already exist if (empty($this->_total)) { $query = $this->_buildQuery(); $this->_total = $this->_getListCount($query); } return $this->_total; } function getPagination() { // Load the content if it doesn't already exist if (empty($this->_pagination)) { jimport('joomla.html.pagination'); $this->_pagination = new JPagination($this->getTotal(), $this->getState('limitstart'), $this->getState('limit') ); } return $this->_pagination; } }//class And the errors are: Notice: Trying to get property of non-object in C:\wamp\www\namnam.com\components\com_namnam\views\listrestaurant\view.html.php on line 26 Notice: Trying to get property of non-object in C:\wamp\www\namnam.com\components\com_namnam\views\listrestaurant\view.html.php on line 29 Notice: Undefined property: namnamModellistrestaurant::$search in C:\wamp\www\namnam.com\components\com_namnam\models\listrestaurant.php on line 38 Notice: Undefined property: namnamModellistrestaurant::$filter_order in C:\wamp\www\namnam.com\components\com_namnam\models\listrestaurant.php on line 48 Notice: Undefined property: namnamModellistrestaurant::$search in C:\wamp\www\namnam.com\components\com_namnam\models\listrestaurant.php on line 38 Notice: Undefined property: namnamModellistrestaurant::$filter_order in C:\wamp\www\namnam.com\components\com_namnam\models\listrestaurant.php on line 48 Notice: Undefined property: namnamModellistrestaurant::$filter_order_Dir in C:\wamp\www\namnam.com\components\com_namnam\models\listrestaurant.php on line 76 Notice: Undefined property: namnamModellistrestaurant::$filter_order in C:\wamp\www\namnam.com\components\com_namnam\models\listrestaurant.php on line 77 Notice: Undefined property: namnamModellistrestaurant::$search in C:\wamp\www\namnam.com\components\com_namnam\models\listrestaurant.php on line 80

Read the article

Probation is Over: PASS Board Year 1, Q2

- by Denise McInerney

Though it's not always official every job begins with a probation period. You start out with lots of questions and every day you find out how much more you have to learn. Usually after a few months you discover that you can actually answer some questions and have at least an idea of what you are supposed to be doing. Now at the end of my second quarter on the "job" of serving on the PASS Board I have reached that point. My probation period is over. The last three months were busy for the entire Board with the budget process, an in-person meeting and moving forward with PASS Global Growth plans. I had also set a specific goal for myself for my 2nd quarter: to see the Board to adopt a Code of Conduct for the PASS Summit. Code of Conduct When I ran for the Board I included my desire to see PASS establish a code of conduct in my campaign platform. I was motivated to do this for a few reasons. Other technical conferences have had incidents of harassment. Most of these did not have a policy in place prior to having a problem, though several conference organizers have since adopted anti-harassment policies or codes of conduct. I felt it would be in PASS' interest to establish a policy so we would be prepared should there be an incident. "This is Community" Adopting a code of conduct would reinforce our community orientation and send a message about the positive character of the Summit. PASS is a leader among technical organizations for its promotion and support of women. Adopting a code of conduct would further demonstrate our leadership in this area. After researching similar polices from other organizations I published a first draft in April. I solicited feedback from the Board, HQ staff and some PASS members. Incorporating that feedback I presented version 4 at the May Board meeting, where we had a good discussion. You can read the meeting minutes for details. I incorporated points from the Board discussion as well as feedback from a legal review to produce a final version which has been submitted to the Board. It will be discussed at the Board meeting July 12. You can read the full text at the end of this post. Virtual Chapters In the first quarter we started ramping up marketing support for the Virtual Chapters. Since then each edition of the Connector has highlighted a different VC to help get out the message about the variety of eductional opporutnities that are offered. These VC profiles will continue in the coming months. I was very pleased to welcome the new DBA Fundamentals VC which is geared toward new DBAs, people who are considering entering the field and those transitioning from a different IT role. Thanks to the contributions of Erin Stellato, Michelle Nalliah and Karla Landrum we published a "Virtual Chapter Guidebook". This document includes great advice on how to build and promote a VC. It's also a reference for how things work, from budgets to webinar hosting. I think this document will be extremely valuable to all our VC leaders and am grateful to those who put it together. Board Meeting/SQL Rally The Board met in May in Dallas. Among the items discussed were Global Growth, the budget, future events and the upcoming elections. We covered a lot of ground in two days and I will again refer you to the meeting minutes for details. The meeting schedule allowed us to participate in the SQL Rally networking events and one full day of the conference. I enjoyed having the opportunity to meet and talk with many PASS members. And my hat is off to the SQL Rally organizers who put on an outstanding event. Global Growth PASS has undertaken a major intitiative to reach and engage SQL Server professionals around the world. This Global Growth plan is ambitious and will have a significant impact on the strategic direction of the organization. We have been reaching out to the community for feedback, including hosting Twitter chats and live Town Hall meetings. I co-hosted two of these events and appreciated hearing the different perspectives of the people who participated If you have not done so I encourage you to read about the Global Growth vision and proposed governance changes and submit your feedback. FY13 Budget July 1 is the beginning of PASS' fiscal year, which makes the end of June the deadline for approving a budget. Each director submits a budget for his or her portfolio. For the Virtual Chapter portfolio I focused on how we can allocate resources to grow the VCs. Budgeting is a give-and-take process, and while I didn't get everything I asked for I'm pleased the FY13 budget includes a significant increase in financial support for the Virtual Chapters. Many people put a lot of work into the budget, but no two people deserve credit more than VP of Finance Douglas McDowell and Accounting Manager Sandy Cherry. Thanks to both of them for getting us across the goal line on time. SQL Saturday I attended SQL Saturdays in Orange Co. CA and Phoenix. It's always inspiring to see the enthusiasm in the community for learning and networking. These events are successful due to the hard work of many volunteers. Thanks to the organizers in both cities for all your efforts. Next Up This quarter we'll be gearing up plans for the VCs at the Summit and exploring ways the VCs can best support PASS' Global Growth work. I'll also be wrapping up work on the Code of Conduct and attending a Board meeting in September. And I will be at SQL Saturday #144 in Sacramento later this month. Here is the language of the Code of Conduct I have submitted to the Board for consideration: PASS Code of Conduct The PASS Summit provides database professionals from a variety of backgrounds with an opportunity to connect, share and learn. We value the strong sense of community that characterizes this event and we seek to foster an inclusive, professional atmosphere. We are dedicated to providing a harassment-free conference experience for everyone, regardless of gender, race, sexual orientation, disability, physical appearance, religion or any other protected classification. Everyone at the Summit is expected to follow the Code of Conduct. This includes but is not limited to: PASS Staff, Exhibitors, Speakers, Attendees and anyone affiliated with the event. Participants are expected to follow the Code of Conduct at all Summit events, including PASS-sponsored social events. Participant behavior Harassment includes, but is not limited to, offensive verbal comments related to gender, race, sexual orientation, disability, physical appearance, religion, or any other protected classification. Intimidation, threats, stalking, harassing photography or recording, sustained disruption of talks or other events, inappropriate physical contact and unwelcome attention will also be considered harassment. Similarly, sexual, racist, derogatory, threatening or other inappropriate language and imagery are not appropriate for any conference venue, including sessions. Recourse If a participant engages in any conduct that is prohibited under this Code of Conduct, the conference organizers may take any action they deem appropriate, including warning the offender or expelling the offender from the conference. No refunds will be granted to attendees expelled from the Summit due to violations of the Code of Conduct. If you are being harassed, witness harassment, or have any other concerns, please contact a member of conference staff immediately. Conference staff can be identified by their “Headquarters/Staff” shirts and are trained to handle the situation appropriately. A Code of Conduct Committee (CCC) made up of the Executive Manager and three members of the Board of Directors designated by the President will be authorized to take action in response to an incident or behavior that violates the Code of Conduct.

Read the article

HttpTransportSE requestDump gives NullPointerException

- by Chamila

Hi, I'm trying to access a webservice in Android via Ksoap2 for android. The SoapObject is created ok, the S.o.p of the bodyOut outputs the desired strings. But when I do a requestDump of the HttpTransportSE object I create to make the call, a NullPointerException happens. In other words, the transport object is null. How can this happen? Web Service is at http://srilanka.lk:9080/services/CropServiceProxy?wsdl This service works very well with SoapUI. SoapUI Request <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:v1="http://schemas.icta.lk/xsd/crop/handler/v1/"> <soap:Header/> <soap:Body> <v1:getCropDataList> <v1:code>ABK</v1:code> </v1:getCropDataList> </soap:Body> </soap:Envelope> SoapUI Response <soapenv:Envelope xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope"> <soapenv:Body> <ns1:getCropDataListResponse xmlns:ns1="http://schemas.icta.lk/xsd/crop/handler/v1/"> <ns1:cropInfo> <ns1:name>Ambul Kesel</ns1:name> <ns1:price>35.0</ns1:price> <ns1:location>Dambulla</ns1:location> </ns1:cropInfo> <ns1:cropInfo> <ns1:name>Ambul Kesel</ns1:name> <ns1:price>40.0</ns1:price> <ns1:location>Dambulla</ns1:location> </ns1:cropInfo> </ns1:getCropDataListResponse> </soapenv:Body> </soapenv:Envelope> Client Side Complex Type KvmSerializable implementation public class CropInfo implements KvmSerializable { private String name; private float price; private String location; @Override public Object getProperty(int arg0) { switch (arg0){ case 0: return name; case 1: return price; case 2: return location; default: return null; } } @Override public int getPropertyCount() { return 3; } @Override public void getPropertyInfo(int arg0, Hashtable arg1, PropertyInfo arg2) { switch (arg0){ case 0: arg2.type = PropertyInfo.STRING_CLASS; arg2.name = "Name"; break; case 1: arg2.type = Float.class; arg2.name = "Price"; break; case 2: arg2.type = PropertyInfo.STRING_CLASS; arg2.name = "Location"; break; default: break; } } @Override public void setProperty(int arg0, Object arg1) { switch(arg0){ case 0: name = arg1.toString(); break; case 1: price = Float.parseFloat(arg1.toString()); case 2: location = arg1.toString(); default: break; } } } Web Service Call public void btnOnClick(View v){ String NAMESPACE = "http://schemas.icta.lk/xsd/crop/handler/v1/"; String URL = "http://220.247.225.202:9080/services/CropServiceProxy.CropServiceProxyHttpSoap12Endpoint"; String method_name = "getCropDataList"; String SOAP_ACTION = "http://schemas.icta.lk/xsd/crop/handler/v1/getCropDataList"; SoapObject soap_request = new SoapObject(NAMESPACE, method_name); soap_request.addProperty("code", "ABK" ); SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER12); envelope.setOutputSoapObject(soap_request); envelope.addMapping(NAMESPACE, "cropInfo", CropInfo.class); //envelope.dotNet=true; Marshal floatMarshal = new MarshalFloat(); floatMarshal.register(envelope); System.out.println("body out : " + envelope.bodyOut.toString()); //AndroidHttpTransport http_transport = new AndroidHttpTransport(URL); HttpTransportSE http_transport = new HttpTransportSE(URL); try { //NullPointerException HERE System.out.println(http_transport.requestDump); http_transport.call(SOAP_ACTION, envelope); //because we should expect a vector, two kinds of prices are given Vector<CropInfo> result_array = (Vector<CropInfo>)envelope.getResponse(); if(result_array != null){ for (CropInfo current_crop: result_array){ System.out.println(current_crop.getName()); System.out.println(Float.toString(current_crop.getPrice())); } } } catch (Exception e) { e.printStackTrace(); answer.setText("error caught"); //System.out.println(http_transport.responseDump); } // String result_string[] = (String[])result; //answer.setText("returned"); } Can anyone explain this?

Read the article

PHP submit problem

- by TaG

I'm trying to check if the username is available and display it for the user to see when they check there account settings, which I have done. BUT when the user tries to fill out another field I get the Your username is unavailable! which should not pop up because its the users username already. I want to know how can I fix this problem using PHP so that the users name is displayed every time the user views their account settings and it wont cause problems when a user submits additional info? Here is the PHP code. if (isset($_POST['submitted'])) { require_once '../htmlpurifier/library/HTMLPurifier.auto.php'; $config = HTMLPurifier_Config::createDefault(); $config->set('Core.Encoding', 'UTF-8'); $config->set('HTML.Doctype', 'XHTML 1.0 Strict'); $config->set('HTML.TidyLevel', 'heavy'); $config->set('HTML.SafeObject', true); $config->set('HTML.SafeEmbed', true); $purifier = new HTMLPurifier($config); $mysqli = mysqli_connect("localhost", "root", "", "sitename"); $dbc = mysqli_query($mysqli,"SELECT users.* FROM users WHERE user_id=3"); $first_name = mysqli_real_escape_string($mysqli, $purifier->purify(htmlentities(strip_tags($_POST['first_name'])))); $username = mysqli_real_escape_string($mysqli, $purifier->purify(htmlentities(strip_tags($_POST['username'])))); if($_POST['username']) { $u = "SELECT user_id FROM users WHERE username = '$username'"; $r = mysqli_query ($mysqli, $u) or trigger_error("Query: $q\n<br />MySQL Error: " . mysqli_error($mysqli)); if (mysqli_num_rows($r) == TRUE) { $username = NULL; echo '<p class="error">Your username is unavailable!</p>'; } else if(mysqli_num_rows($r) == 0) { $username = mysqli_real_escape_string($mysqli, $purifier->purify(htmlentities(strip_tags($_POST['username'])))); if ($_POST['password1'] == $_POST['password2']) { $sha512 = hash('sha512', $_POST['password1']); $password = mysqli_real_escape_string($mysqli, $purifier->purify(strip_tags($sha512))); } else { $password = NULL; } if($password == NULL) { echo '<p class="error">Your password did not match the confirmed password!</p>'; } else { if (mysqli_num_rows($dbc) == 0) { $mysqli = mysqli_connect("localhost", "root", "", "sitename"); $dbc = mysqli_query($mysqli,"INSERT INTO users (user_id, first_name, username, password) VALUES ('$user_id', '$first_name', '$username', '$password')"); } if ($dbc == TRUE) { $dbc = mysqli_query($mysqli,"UPDATE users SET first_name = '$first_name', username = '$username', password = '$password' WHERE user_id = '$user_id'"); echo '<p class="changes-saved">Your changes have been saved!</p>'; } if (!$dbc) { print mysqli_error($mysqli); return; } } } } } Here is the html form. <form method="post" action="index.php"> <fieldset> <ul> <li><label for="first_name">First Name: </label><input type="text" name="first_name" id="first_name" size="25" class="input-size" value="<?php if (isset($_POST['first_name'])) { echo stripslashes(htmlentities(strip_tags($_POST['first_name']))); } else if(!empty($first_name)) { echo stripslashes(htmlentities(strip_tags($first_name))); } ?>" /></li> <li><label for="username">UserName: </label><input type="text" name="username" id="username" size="25" class="input-size" value="<?php if (isset($_POST['username'])) { echo stripslashes(htmlentities(strip_tags($_POST['username']))); } else if(!empty($username)) { echo stripslashes(htmlentities(strip_tags($username))); } ?>" /><br /><span>(ex: CSSKing, butterball)</span></li> <li><label for="password1">Password: </label><input type="password" name="password1" id="password1" size="25" class="input-size" value="<?php if (isset($_POST['password1'])) { echo stripslashes(htmlentities(strip_tags($_POST['password1']))); } ?>" /></li> <li><label for="password2">Confirm Password: </label><input type="password" name="password2" id="password2" size="25" class="input-size" value="<?php if (isset($_POST['password2'])) { echo stripslashes(htmlentities(strip_tags($_POST['password2']))); } ?>" /></li> <li><input type="submit" name="submit" value="Save Changes" class="save-button" /> <input type="hidden" name="submitted" value="true" /> <input type="submit" name="submit" value="Preview Changes" class="preview-changes-button" /></li> </ul> </fieldset> </form>

Read the article

Moving from Tortoise to TFS

- by MarkPearl

The Past A few years ago my small software company made the jump from storing code on a shared folder to source code control. At the time we had evaluated a few of the options and settled on Tortoise SVN. The main motivation for going the SVN route was that we found a great plugin for Visual Studio that allowed us to avoid the command prompt for uploading changes (like I said we are windows programmers… command prompt bad!! ) and it was free. Up to now we have been pretty happy with SVN as it removed many of the worries that I had about how safe my code was on a shared folder and also gave us the opportunity to safely have several developers work on the same project at the same time. The only times when we have been unhappy has been when we have had SVN hell days – which pretty much occur when you are doing something out of the norm and suddenly SVN just won’t resolve conflicts or something along those lines. This happens once every 4 or 5 months and is not necessarily a problem caused directly by SVN – but a problem augmented by SVN. When you have SVN hell days you want to curse SVN! With that in mind I recently have been relooking at our source code control. I have explored using GIT and was very impressed by it and have also looked at TFS. From a source code control perspective I don’t want to get into a heated discussion on which one is better – but I do want to mention that I wear two hats in my organization – software developer & manager, and with the manager hat on I tend to sway the TFS route. So when I was given a coupon to test DiscountASP.Net Team Foundation Server Service for a year, I thought it was the perfect opportunity to try TFS in a distributed environment and also make the first step towards having an integrated development management system. Some of the things that appeal to me about DiscountASP’s offering are the following… Basic management / planning facilities like to do lists inside Visual Studio Daily backup of data on the server – we are developers, not IT managers and so the more of this I could outsource the better Distributed solution – all of us work remotely and so this was a big one as well. Registering and Setting Up with DiscountASP.NET The whole registration process was simple and intuitive. The web interface is not the most visually impressive one, but it is functional and a few seconds after I clicked the last submit button a email was sitting in my inbox giving me my control panel username and suggesting that I read the “Getting Started” article. The getting started article was easy to read and understand so no complaints there either. Next to set my dev environment to work. With a few references to the getting started article I had completed the whole setup process in a matter of minutes. Ten minutes after initiating the whole thing I was logged into VS2010 and creating my first TFS project. With the service that I signed up for, I have access for 5 users – which is sufficient for my internal needs. So from what I can tell, to set the rest of us up on the system I just need to supply them with their user credentials and url. My Concerns Resolved 1) Security So, a few concerns I had about the service. First and foremost – is it secure? I would hate for someone to get access to our code and the whole idea of putting it up on the internet is a concern for me. Turning to the Knowledge Base on the DiscountASP website this is one of the first question I can see answered. According to them it is secure. I have extracted their comment below regarding this. Our TFS hosting service is secure. We only accept HTTPS connections ensuring that any client-server data transmission is encrypted. At the network level, all of our systems are protected by multiple Juniper firewalls, Tipping Point's Intrusion Detection System (see Tipping Point's case study of our use here), and we also employ DDoS mitigation to add extra layers of security. Additionally, physical access to the servers is tightly restricted. Please see the security section of this Knowledge Base article for further details. 2) Web Portal Access The other big concern I have is regarding web portal access. In the ideal world I would like to be able to give my end users access to a web portal for reporting bugs etc. When I initially read through the FAQ of the site it mentioned that there was web portal access – but from what I can see this is just for “users”. Since I am limited to 5 users for the account, it would not be practical to set up external users that we could get feedback from on bugs etc. I would be interested if this is possible – and if so if someone could post it in the comments it would be much appreciated. If this isn’t possible, it is a slight let down as we rely heavily on end user feedback to get feedback and it would have been ideal to have gotten this within the service. Other than those two items, I didn’t have any real concerns that were unresolved. So where do I go from here? So time passed by from the initial writing of this post and as work whirred in and out of my inbox I have still not had a proper opportunity to give the service a test run. Recently though things have began to slow down and then surprise surprise I had another SVN Hell day. With that experience I had a new found resolve to get our team on TFS and so today we are going to start to use the service as a team. I am hoping that I do not have TFS hell days – but if I do, I will be sure to write about them. In short - the verdict is still out on whether this service is going to be invaluable to my business or whether it will create more headaches than it is worth BUT I am hopping it will be an invaluable service. I will only really be able to determine that in a few months… till then!

Read the article

Conducting Effective Web Meetings

- by BuckWoody

There are several forms of corporate communication. From immediate, rich communications like phones and IM messaging to historical transactions like e-mail, there are a lot of ways to get information to one or more people. From time to time, it's even useful to have a meeting. (This is where a witty picture of a guy sleeping in a meeting goes. I won't bother actually putting one here; you're already envisioning it in your mind) Most meetings are pointless, and a complete waste of time. This is the fault, completely and solely, of the organizer. It's because he or she hasn't thought things through enough to think about alternate forms of information passing. Here's the criteria for a good meeting - whether in-person or over the web: 100% of the content of a meeting should require the participation of 100% of the attendees for 100% of the time It doesn't get any simpler than that. If it doesn't meet that criteria, then don't invite that person to that meeting. If you're just conveying information and no one has the need for immediate interaction with that information (like telling you something that modifies the message), then send an e-mail. If you're a manager, and you need to get status from lots of people, pick up the phone.If you need a quick answer, use IM. I once had a high-level manager that called frequent meetings. His real need was status updates on various processes, so 50 of us would sit in a room while he asked each one of us questions. He believed this larger meeting helped us "cross pollinate ideas". In fact, it was a complete waste of time for most everyone, except in the one or two moments that they interacted with him. So I wrote some code for a Palm Pilot (which was a kind of SmartPhone but with no phone and no real graphics, but this was in the days when we had just discovered fire and the wheel, although the order of those things is still in debate) that took an average of the salaries of the people in the room (I guessed at it) and ran a timer which multiplied the number of people against the salaries. I left that running in plain sight for him, and when he asked about it, I explained how much the meetings were really costing the company. We had far fewer meetings after. Meetings are now web-enabled. I believe that's largely a good thing, since it saves on travel time and allows more people to participate, but I think the rule above still holds. And in fact, there are some other rules that you should follow to have a great meeting - and fewer of them. Be Clear About the Goal This is important in any meeting, but all of us have probably gotten an invite with a web link and an ambiguous title. Then you get to the meeting, and it's a 500-level deep-dive on something everyone expects you to know. This is unfair to the "expert" and to the participants. I always tell people that invite me to a meeting that I will be as detailed as I can - but the more detail they can tell me about the questions, the more detailed I can be in my responses. Granted, there are times when you don't know what you don't know, but the more you can say about the topic the better. There's another point here - and it's that you should have a clearly defined "win" for the meeting. When the meeting is over, and everyone goes back to work, what were you expecting them to do with the information? Have that clearly defined in your head, and in the meeting invite. Understand the Technology There are several web-meeting clients out there. I use them all, since I meet with clients all over the world. They all work differently - so I take a few moments and read up on the different clients and find out how I can use the tools properly. I do this with the technology I use for everything else, and it's important to understand it if the meeting is to be a success. If you're running the meeting, know the tools. I don't care if you like the tools or not, learn them anyway. Don't waste everyone else's time just because you're too bitter/snarky/lazy to spend a few minutes reading. Check your phone or mic. Check your video size. Install (and learn to use) ZoomIT (http://technet.microsoft.com/en-us/sysinternals/bb897434.aspx). Format your slides or screen or output correctly. Learn to use the voting features of the meeting software, and especially it's whiteboard features. Figure out how multiple monitors work. Try a quick meeting with someone to test all this. Do this *before* you invite lots of other people to your meeting. Use a WebCam I'm not a pretty man. I have a face fit for radio. But after attending a meeting with clients where one Microsoft person used a webcam and another did not, I'm convinced that people pay more attention when a face is involved. There are tons of studies around this, or you can take my word for it, but toss a shirt on over those pajamas and turn the webcam on. Set Up Early Whether you're attending or leading the meeting, don't wait to sign on to the meeting at the time when it starts. I can almost plan that a 10:00 meeting will actually start at 10:10 because the participants/leader is just now installing the web client for the meeting at 10:00. Sign on early, go on mute, and then wait for everyone to arrive. Mute When Not Talking No one wants to hear your screaming offspring / yappy dog / other cubicle conversations / car wind noise (are you driving in a desert storm or something?) while the person leading the meeting is trying to talk. I use the Lync software from Microsoft for my meetings, and I mute everyone by default, and then tell them to un-mute to talk to the group. Share Collateral If you have a PowerPoint deck, mail it out in case you have a tech failure. If you have a document, share it as an attachment to the meeting. Don't make people ask you for the information - that's why you're there to begin with. Even better, send it out early. "But", you say, "then no one will come to the meeting if they have the deck first!" Uhm, then don't have a meeting. Send out the deck and a quick e-mail and let everyone get on with their productive day. Set Actions At the Meeting A meeting should have some sort of outcome (see point one). That means there are actions to take, a follow up, or some deliverable. Otherwise, it's an e-mail. At the meeting, decide who will do what, when things are needed, and so on. And avoid, if at all possible, setting up another meeting, unless absolutely necessary. So there you have it. Whether it's on-premises or on the web, meetings are a necessary evil, and should be treated that way. Like politicians, you should have as few of them as are necessary to keep the roads paved and public libraries open.

Read the article

PASS: The Budget Process

- by Bill Graziano

Every fiscal year PASS creates a detailed budget. This helps us set priorities and communicate to our members what we’re going to do in the upcoming year. You can review the current budget on the PASS Governance page. That page currently requires you to login but I’m talking with HQ to see if there are any legal issues with opening that up. The Accounting Team The PASS accounting team is two people. The Executive Vice-President of Finance (“EVP”) and the PASS Accounting Manager. Sandy Cherry is the accounting manager and works at PASS HQ. Sandy has been with PASS since we switched management companies in 2007. Throughout this document when I talk about any actual work related to the budget that’s all Sandy :) She’s the glue that gets us through this process. Last year we went through 32 iterations of the budget before the Board approved so it’s a pretty busy time for her us – well, mostly her. Fiscal Year The PASS fiscal year runs from July 1st through June 30th the following year. Right now we’re in fiscal year 2011. Our 2010 Summit actually occurred in FY2011. We switched to this schedule from a calendar year in 2006. Our goal was to have the Summit occur early in our fiscal year. That gives us the rest of the year to handle any significant financial impact from the Summit. If registrations are down we can reduce spending. If registrations are up we can decide how much to increase our reserves and how much to spend. Keep in mind that the Summit is budgeted to generate 82% of our revenue this year. How it performs has a significant impact on our financials. The other benefit of this fiscal year is that it matches the Microsoft fiscal year. We sign an annual sponsorship agreement with Microsoft and it’s very helpful that our fiscal years match. This year our budget process will probably start in earnest in March or April. I’d like to be done in early June so we can publish before July 1st. I was late publishing it this year and I’m trying not to repeat that. Our Budget Our actual budget is an Excel spreadsheet with 36 sheets. We remove some of those when we publish it since they include salary information. The budget is broken up into various portfolios or departments. We have 20 portfolios. They include chapters, marketing, virtual chapters, marketing, etc. Ideally each portfolio is assigned to a Board member. Each portfolio also typically has a staff person assigned to it. Portfolios that aren’t assigned to a Board member are monitored by HQ and the ExecVP-Finance (me). These are typically smaller portfolios such as deferred membership or Summit futures. (More on those in a later post.) All portfolios are reviewed by all Board members during the budget approval process, when interim financials are released internally and at year-end. The Process Our first step is to budget revenues. The Board determines a target attendee number. We have formulas based on historical performance that convert that to an overall attendee revenue number. Other revenue projections (such as vendor sponsorships) come from different parts of the organization. I hope to have another post with more details on how we project revenues. The next step is to budget expenses. Board members fill out a sample spreadsheet with their budget for the year. They can add line items and notes describing what the amounts are for. Each Board portfolio typically has from 10 to 30 line items. Any new initiatives they want to pursue needs to be budgeted. The Summit operations budget is managed by HQ. It includes the cost for food, electrical, internet, etc. Most of these come from our estimate of attendees and our contract with the convention center. During this process the Board can ask for more or less to be spent on various line items. For example, if we weren’t happy with the Internet at the last Summit we can ask them to look into different options and/or increasing the budget. HQ will also make adjustments to these numbers based on what they see at the events and the feedback we receive on the surveys. After we have all the initial estimates we start reviewing the entire budget. It is sent out to the Board and we can see what each portfolio requested and what the overall profit and loss number is. We usually start with too much in expenses and need to cut. In years past the Board started haggling over these numbers as a group. This past year they decided I should take a first cut and present them with a reasonable budget and a list of what I changed. That worked well and I think we’ll continue to do that in the future. We go through a number of iterations on the budget. If I remember correctly, we went through 32 iterations before we passed the budget. At each iteration various revenue and expense numbers can change. Keep in mind that the PASS budget has 200+ line items spread over 20 portfolios. Many of these depend on other numbers. For example, if we decide increase the projected attendees that cascades through our budget. At each iteration we list what changed and the impact. Ideally these discussions will take place at a face-to-face Board meeting. Many of them also take place over the phone. Board members explain any increase they are asking for while performing due diligence on other budget requests. Eventually a budget emerges and is passed. Publishing After the budget is passed we create a version without the formulas and salaries for posting on the web site. Sandy also creates some charts to help our members understand the budget. The EVP writes a nice little letter describing some of the changes from last year’s budget. You can see my letter and our budget on the PASS Governance page. And then, eight months later, we start all over again.

Read the article

Spritebatch drawing sprite with jagged borders

- by Mutoh

Alright, I've been on the making of a sprite class and a sprite sheet manager, but have come across this problem. Pretty much, the project is acting like so; for example: Let's take this .png image, with a transparent background. Note how it has alpha-transparent pixels around it in the lineart. Now, in the latter link's image, in the left (with CornflowerBlue background) it is shown the image drawn in another project (let's call it "Project1") with a simpler sprite class - there, it works. The right (with Purple background for differentiating) shows it drawn with a different class in "Project2" - where the problem manifests itself. This is the Sprite class of Project1: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; namespace WindowsGame2 { class Sprite { Vector2 pos = new Vector2(0, 0); Texture2D image; Rectangle size; float scale = 1.0f; // --- public float X { get { return pos.X; } set { pos.X = value; } } public float Y { get { return pos.Y; } set { pos.Y = value; } } public float Width { get { return size.Width; } } public float Height { get { return size.Height; } } public float Scale { get { return scale; } set { if (value < 0) value = 0; scale = value; if (image != null) { size.Width = (int)(image.Width * scale); size.Height = (int)(image.Height * scale); } } } // --- public void Load(ContentManager Man, string filename) { image = Man.Load<Texture2D>(filename); size = new Rectangle( 0, 0, (int)(image.Width * scale), (int)(image.Height * scale) ); } public void Become(Texture2D frame) { image = frame; size = new Rectangle( 0, 0, (int)(image.Width * scale), (int)(image.Height * scale) ); } public void Draw(SpriteBatch Desenhista) { // Desenhista.Draw(image, pos, Color.White); Desenhista.Draw( image, pos, new Rectangle( 0, 0, image.Width, image.Height ), Color.White, 0.0f, Vector2.Zero, scale, SpriteEffects.None, 0 ); } } } And this is the code in Project2, a rewritten, pretty much, version of the previous class. In this one I added sprite sheet managing and, in particular, removed Load and Become, to allow for static resources and only actual Sprites to be instantiated. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; namespace Mobby_s_Adventure { // Actually, I might desconsider this, and instead use static AnimationLocation[] and instanciated ID and Frame; // For determining the starting frame of an animation in a sheet and being able to iterate through // the Rectangles vector of the Sheet; class AnimationLocation { public int Location; public int FrameCount; // --- public AnimationLocation(int StartingRow, int StartingColumn, int SheetWidth, int NumberOfFrames) { Location = (StartingRow * SheetWidth) + StartingColumn; FrameCount = NumberOfFrames; } public AnimationLocation(int PositionInSheet, int NumberOfFrames) { Location = PositionInSheet; FrameCount = NumberOfFrames; } public static int CalculatePosition(int StartingRow, int StartingColumn, SheetManager Sheet) { return ((StartingRow * Sheet.Width) + StartingColumn); } } class Sprite { // The general stuff; protected SheetManager Sheet; protected Vector2 Position; public Vector2 Axis; protected Color _Tint; public float Angle; public float Scale; protected SpriteEffects _Effect; // --- // protected AnimationManager Animation; // For managing the animations; protected AnimationLocation[] Animation; public int AnimationID; protected int Frame; // --- // Properties for easy accessing of the position of the sprite; public float X { get { return Position.X; } set { Position.X = Axis.X + value; } } public float Y { get { return Position.Y; } set { Position.Y = Axis.Y + value; } } // --- // Properties for knowing the size of the sprite's frames public float Width { get { return Sheet.FrameWidth * Scale; } } public float Height { get { return Sheet.FrameHeight * Scale; } } // --- // Properties for more stuff; public Color Tint { set { _Tint = value; } } public SpriteEffects Effect { set { _Effect = value; } } public int FrameID { get { return Frame; } set { if (value >= (Animation[AnimationID].FrameCount)) value = 0; Frame = value; } } // --- // The only things that will be constantly modified will be AnimationID and FrameID, anything else only // occasionally; public Sprite(SheetManager SpriteSheet, AnimationLocation[] Animations, Vector2 Location, Nullable<Vector2> Origin = null) { // Assign the sprite's sprite sheet; // (Passed by reference! To allow STATIC sheets!) Sheet = SpriteSheet; // Define the animations that the sprite has available; // (Passed by reference! To allow STATIC animation boundaries!) Animation = Animations; // Defaulting some numerical values; Angle = 0.0f; Scale = 1.0f; _Tint = Color.White; _Effect = SpriteEffects.None; // If the user wants a default Axis, it is set in the middle of the frame; if (Origin != null) Axis = Origin.Value; else Axis = new Vector2( Sheet.FrameWidth / 2, Sheet.FrameHeight / 2 ); // Now that we have the axis, we can set the position with no worries; X = Location.X; Y = Location.Y; } // Simply put, draw the sprite with all its characteristics; public void Draw(SpriteBatch Drafter) { Drafter.Draw( Sheet.Texture, Position, Sheet.Rectangles[Animation[AnimationID].Location + FrameID], // Find the rectangle which frames the wanted image; _Tint, Angle, Axis, Scale, _Effect, 0.0f ); } } } And, in any case, this is the SheetManager class found in the previous code: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; namespace Mobby_s_Adventure { class SheetManager { protected Texture2D SpriteSheet; // For storing the sprite sheet; // Number of rows and frames in each row in the SpriteSheet; protected int NumberOfRows; protected int NumberOfColumns; // Size of a single frame; protected int _FrameWidth; protected int _FrameHeight; public Rectangle[] Rectangles; // For storing each frame; // --- public int Width { get { return NumberOfColumns; } } public int Height { get { return NumberOfRows; } } // --- public int FrameWidth { get { return _FrameWidth; } } public int FrameHeight { get { return _FrameHeight; } } // --- public Texture2D Texture { get { return SpriteSheet; } } // --- public SheetManager (Texture2D Texture, int Rows, int FramesInEachRow) { // Normal assigning SpriteSheet = Texture; NumberOfRows = Rows; NumberOfColumns = FramesInEachRow; _FrameHeight = Texture.Height / NumberOfRows; _FrameWidth = Texture.Width / NumberOfColumns; // Framing everything Rectangles = new Rectangle[NumberOfRows * NumberOfColumns]; int ID = 0; for (int i = 0; i < NumberOfRows; i++) { for (int j = 0; j < NumberOfColumns; j++) { Rectangles[ID] = new Rectangle ( _FrameWidth * j, _FrameHeight * i, _FrameWidth, _FrameHeight ); ID++; } } } public SheetManager (Texture2D Texture, int NumberOfFrames): this(Texture, 1, NumberOfFrames) { } } } For even more comprehending, if needed, here is how the main code looks like (it's just messing with the class' capacities, nothing actually; the result is a disembodied feet walking in place animation on the top-left of the screen and a static axe nearby): using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; using System.Threading; namespace Mobby_s_Adventure { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; static List<Sprite> ToDraw; static Texture2D AxeSheet; static Texture2D FeetSheet; static SheetManager Axe; static Sprite Jojora; static AnimationLocation[] Hack = new AnimationLocation[1]; static SheetManager Feet; static Sprite Mutoh; static AnimationLocation[] FeetAnimations = new AnimationLocation[2]; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; this.TargetElapsedTime = TimeSpan.FromMilliseconds(100); this.IsFixedTimeStep = true; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); // Loading logic ToDraw = new List<Sprite>(); AxeSheet = Content.Load<Texture2D>("Sheet"); FeetSheet = Content.Load<Texture2D>("Feet Sheet"); Axe = new SheetManager(AxeSheet, 1); Hack[0] = new AnimationLocation(0, 1); Jojora = new Sprite(Axe, Hack, new Vector2(100, 100), new Vector2(5, 55)); Jojora.AnimationID = 0; Jojora.FrameID = 0; Feet = new SheetManager(FeetSheet, 8); FeetAnimations[0] = new AnimationLocation(1, 7); FeetAnimations[1] = new AnimationLocation(0, 1); Mutoh = new Sprite(Feet, FeetAnimations, new Vector2(0, 0)); Mutoh.AnimationID = 0; Mutoh.FrameID = 0; } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // Update logic Mutoh.FrameID++; ToDraw.Add(Mutoh); ToDraw.Add(Jojora); base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Purple); // Drawing logic spriteBatch.Begin(); foreach (Sprite Element in ToDraw) { Element.Draw(spriteBatch); } spriteBatch.Draw(Content.Load<Texture2D>("Sheet"), new Rectangle(50, 50, 55, 60), Color.White); spriteBatch.End(); base.Draw(gameTime); } } } Please help me find out what I'm overlooking! One thing that I have noticed and could aid is that, if inserted the equivalent of this code spriteBatch.Draw( Content.Load<Texture2D>("Image Location"), new Rectangle(X, Y, images width, height), Color.White ); in Project2's Draw(GameTime) of the main loop, it works. EDIT Ok, even if the matter remains unsolved, I have made some more progress! As you see, I managed to get the two kinds of rendering in the same project (the aforementioned Project2, with the more complex Sprite class). This was achieved by adding the following code to Draw(GameTime): protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Purple); // Drawing logic spriteBatch.Begin(); foreach (Sprite Element in ToDraw) { Element.Draw(spriteBatch); } // Starting here spriteBatch.Draw( Axe.Texture, new Vector2(65, 100), new Rectangle ( 0, 0, Axe.FrameWidth, Axe.FrameHeight ), Color.White, 0.0f, new Vector2(0, 0), 1.0f, SpriteEffects.None, 0.0f ); // Ending here spriteBatch.End(); base.Draw(gameTime); } (Supposing that Axe is the SheetManager containing the texture, sorry if the "jargons" of my code confuse you :s) Thus, I have noticed that the problem is within the Sprite class. But I only get more clueless, because even after modifying its Draw function to this: public void Draw(SpriteBatch Drafter) { /*Drafter.Draw( Sheet.Texture, Position, Sheet.Rectangles[Animation[AnimationID].Location + FrameID], // Find the rectangle which frames the wanted image; _Tint, Angle, Axis, Scale, _Effect, 0.0f );*/ Drafter.Draw( Sheet.Texture, Position, new Rectangle( 0, 0, Sheet.FrameWidth, Sheet.FrameHeight ), Color.White, 0.0f, Vector2.Zero, Scale, SpriteEffects.None, 0 ); } to make it as simple as the patch of code that works, it still draws the sprite jaggedly!

Search Results

Search found 32364 results on 1295 pages for 'null layout manager'.

Page 684/1295 | < Previous Page | 680 681 682 683 684 685 686 687 688 689 690 691 | Next Page >

- by Sridhar_R-Oracle

- by Lynnooi

- by Ristogod

- by user262325

- by Mandy Ho

- by Marcel

- by Ricardo Peres

- by Andreas Hartmann

- by Guillaume

- by Lloyd Banks

- by Jason

- by Karoly Vegh

- by Brendan

- by Johnm

- by Guillaume

- by marharépa

- by JoshReuben

- by anwar

- by Denise McInerney

- by Chamila

- by TaG

- by MarkPearl

- by BuckWoody

- by Bill Graziano

- by Mutoh

< Previous Page | 680 681 682 683 684 685 686 687 688 689 690 691 | Next Page >