Search Results

Search found 38814 results on 1553 pages for 'html email'.

Page 685/1553 | < Previous Page | 681 682 683 684 685 686 687 688 689 690 691 692  | Next Page >

• IIS's SMTP Pickup timing

  - by fatcat1111

  I have IIS's SMTP server set up as a closed relay, and it's working nicely. I also have an application that writes EML files. If the EML files are written to a temporary directory, then moved to the server's Pickup directory, email is sent as expected. However, if I have the application write the EML files directly to the Pickup directory, the email will often fail to send. This seems to be a race condition: the server starts processing the EML file as soon as it detects it in Pickup, even though the application hasn't completed writing it. The result is the server considers the EML to be malformed, and it punts it to Badmail. While I very much appreciate the server's earnestness, it seems that I need to dial it back a bit for this scenario. Does anybody know if IIS's SMTP server's polling frequency can be configured? I am using IIS7, Windows Server 2008 R2. The application that writes the EML cannot be modified.

  Read the article

• SSL issue with emails

  - by JackWillDavis

  OK, so I have somebody hosting a site on my CentOS 5.8 Plesk 11 control panel. He has a EV SSL which is validating the site fine however he has failed the PCI check because it is saying his email servers (SMTP, IPAM, POP) have the wrong name on the servers. This is because his SSL certificate is not a wildcard certificate and the email servers are flagging the default Plesk SSL certificate. Is there a way to stop Plesk automatically connecting emails via the default SSL? I'm fairly new to things like this so I hope I've written everything I need, let me know if any more details are needed. Jack

  Read the article

• Single Exchange 2007 server - two AD domains

  - by TheCleaner

  CURRENT: single domain, single Exchange 2007 NEW: two domains, single Exchange 2007 Can this be done? Details: Current setup is a single W2k3 domain with a single Exchange 2007 server. We are merging with another company that currently hosts their email with their ISP via POP3. We'd like to start hosting their email on our Exchange server using their existing domain SMTP addresses. They don't have an AD domain at all at the moment. Recommendations? Can I do this with a trust between the 2 domains? Requirements: They can't have multiple SMTP addresses on both domains...such as I've seen with articles pointing to "hosting multiple domains". I want companyA to have the same account settings they've always had...companyB to have the same SMTP address they've had and not an additional one on the current companyA Exchange domain. They should be able to collaborate (calendar, contacts, GALs) but should still be distinguishable based on which company they "work for". Please help...thanks!

  Read the article

• NGINX rewrite for vanity URLs when file doesn't exist (try_files and rewrite together)

  - by user1721724

  I'm trying to get vanity URLs on my server. If the file path from the URL doesn't exist, I want to rewrite the URL to profile.php, but if my users have periods in their usernames, their vanity URL doesn't work. Here is my conf block. server { listen 80; server_name www.example.com; rewrite ^/([a-zA-Z0-9-_]+)$ /profile.php?url=$1 last; root /var/www/html/example.com; error_page 404 = /404.php; location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 1y; log_not_found off; } location ~ \.php$ { fastcgi_pass example_fast_cgi; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/html/example.com$fastcgi_script_name; include fastcgi_params; } location / { index index.php index.html index.htm; } location ~ /\.ht { deny all; } location /404.php { internal; return 404; } } Any help would be appreciated. Thanks!

  Read the article

• Exclude list of specific files in wget

  - by nanker

  I am trying to download a lot of pages from a website on dial-up and it can be brutally slow. I have almost got the perfect wget command, but because I'm downloading pages from the same site wget wastes times downloading the same standard images for each page. If I know the name of the default page images, is there any way to have wget ignore and thus avoid downloading those for each and every page? Here is an example of one of the wget commands that my shell script generates into another shell script to download all of the pages: mkdir candy-canes-on-the-flannel-board-in-preschool cd candy-canes-on-the-flannel-board-in-preschool wget -p -nd -A jpg,html -k http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ wget -c --random-wait --timeout=30 --user-agent="Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3) Gecko/2008092416 Firefox/3.0.3" http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ -O "candy-canes-on-the-flannel-board-in-preschool" rm Baby-and-Toddler.jpg Childrens-Books.jpg Creative-Art.jpg Felt-Fun.jpg Happy_Rainbow-e1338766526528.jpg index.html Language-and-Literacy.jpg Light-table-Button.jpg Math.jpg Outdoor-Play.jpg outer-jacket1-300x153.jpg preschoolspot-button-small.jpg robots.txt Science-and-Nature.jpg Signature-2.jpg Story-Telling.jpg Tags-on-Preschool.jpg Teaching-Two-and-Three-Year-olds.jpg cd ../ Now I realize the script is not likely as savvy as it could be but it is doing what I need at the moment except that you can see from the rm command that I would just like to prevent wget from downloading the files in the first place if possible. I almost forgot to mention, there are two wget commands and that is because the first one downloads the page as index.html and for some reason it does not open in my browser, however, when I open it and look at it in vim all of the page's content is there, so I am not sure why it does not open. But if I just issue the second wget command as it is then that page, same file really with an alternate name, opens up fine. Something that if I could fix would also help to streamline the process.

  Read the article

• How to install and Configure MTA on Linux [closed]

  - by Umair Mustafa

  I need to know which MTA's is better and simple to handle and configure in linux. As I need to run a script that will send me the output of that command whenever it will run using cron. Ok the case is this. Every day I have to manually check the Disk space of server which are more than 30 which is headache and have to document that. So I will simply add the follwing command DF- H and the output of this command should be send on my email. So now IF u got the story then tell me what MTA is better sendmail, postfix and some instructions on HOW TO INSTALL and CONFIGURE it. And after configuring the How do I add the DF -H so that it will start seniding me the output on my email. Thanks in advance.

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• Controlling clone access to multiple mercurial repos served via hgwebdir.cgi

  - by chrislawlor

  I'm trying to host multiple hg repositories to use for my clients. I need to control access to each repository individually - not just push access, but clone as well. I've got an .htaccess set which requires authentication globally: AuthUserFile /path/to/hgweb.passwd AuthGroupFile /dev/null AuthName "Chris Lawlor Client Mercurial Repositories" AuthType Basic <Limit GET POST PUT> Require valid-user </Limit> <FilesMatch "\.(htaccess|passwd|config|bak)$"> Order Allow,Deny Deny from all </FilesMatch> Then in each repository, I've got a .hg/hgrc file requiring a valid user [web] allow_push = <comma seperated user list> This almost does what I need. The problem is that I need to add ALL my clients to hgweb.passwd, which gives them clone access to ALL of the repositories. The only solution I can think of is to have another .htaccess and .passwd file in EACH repository. I don't really want to do that though, seems a little convoluted. I can already specify a list of authorized users for each repository in that repos' hgrc file with the allow_push setting. If only there were an allow_clone setting as well... All the documentation I've found for hgwebdir.cgi is incomplete. I've read: http://mercurial.selenic.com/wiki/HgWebDirStepByStep http://hgbook.red-bean.com/read/collaborating-with-other-people.html#sec:collab:cgi http://hgbook.red-bean.com/read/collaborating-with-other-people.html And others. I've yet to find a comprehensive list of hgrc settings. I guess this is as much an Apache question than a mercurial question. Unless I can find a better approach, I'll be going with a seperate .htaccess and .passwd file for each repo. This is a virtual host on Webfaction if it matters - set up roughly like this http://docs.webfaction.com/software/mercurial.html

  Read the article

• postfix uses hostname instead of myhostname.

  - by sunny.oxide

  Hi there, I am trying to set up an outgoing mail server for sending emails which is to relay to our ISP. In /etc/postfix/main.cf I have myhostname to ourcompany.example.com and myorigin and mydomain to $myhostname. ourcompany.example.com is resolvable. But looking at the logs in /var/log/maillog it appears that postfix does use the myhostname for the send address, but uses whatever from getmyhostname(), which is set to an internal DNS name since this is an internal server and we only send email out, but not handling incoming email. Any ideas?

  Read the article

• Dovecot immediately logs off user

  - by nona urbiz

  I'm trying to set up email on my server, and have successfully set up POP3 with gmail for my main account. When attempting to set up another user though, gmail reports ` There was a problem communicating with dylanstestserver.com. I can't figure out why it's working for me and not the other users. I do receive email sent to the address on the server. One suggestion I found online was to try logging in over telnet, but strangely, it kicks me off right after I log in. dylan~$ telnet dylanstestserver.com 110 Trying 50.16.219.8... Connected to dylanstestserver.com. Escape character is '^]'. +OK Dovecot ready. user dylanstestemail +OK pass password +OK Logged in. Connection closed by foreign host. thanks for any ideas and help

  Read the article

• BugZilla XML RPC Interface

  - by Damo

  I am attempting to setup BugZilla to receive but reports from another system using the XML-RPC interface. BugZilla works fine on its own with its own interface. When I attempt to test the XML-RPC functionality by accessing "xmlrpc.cgi" in my browser I get the error: The XML-RPC Interface feature is not available in this Bugzilla at C:\BugZilla\xmlrpc.cgi line 27 main::BEGIN(...) called at C:\BugZilla\xmlrpc.cgi line 29 eval {...} called at C:\BugZilla\xmlrpc.cgi line 29 Following this I install test-taint package from the default perl repository, this installs version 1.04. Re-running "xmlrpc.cgi" gives me an IIS error: 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. So I run the checksetup.pl which inform me that: Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Installing Test-Taint from CPAN is the same. I assume XML-RPC is relent on Test-Taint, but Test-Taint doesn't seem to run correctly. If I ignore this error and attempt to invoke "bz_webservice_demo.pl" to add an entry the script times out. How can I get the XML-RPC / Test-Taint function working ? Current Setup: IIS7.5 on Windows Server 2008 Bugzilla 4.2.2 Perl 5.14.2 C:\BugZilla>perl checksetup.pl Set up gcc environment - 3.4.5 (mingw-vista special r3) * This is Bugzilla 4.2.2 on perl 5.14.2 * Running on Win2008 Build 6002 (Service Pack 2) Checking perl modules... Checking for CGI.pm (v3.51) ok: found v3.59 Checking for Digest-SHA (any) ok: found v5.62 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.76 Checking for DateTime-TimeZone (v0.79) ok: found v1.48 Checking for DBI (v1.614) ok: found v1.622 Checking for Template-Toolkit (v2.22) ok: found v2.24 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.904) ok: found v1.911 Checking for URI (v1.37) ok: found v1.59 Checking for List-MoreUtils (v0.22) ok: found v0.33 Checking for Math-Random-ISAAC (v1.0.1) ok: found v1.004 Checking for Win32 (v0.35) ok: found v0.44 Checking for Win32-API (v0.55) ok: found v0.64 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.18.1 Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for DBD-SQLite (v1.29) ok: found v1.33 Checking for DBD-Oracle (v1.19) ok: found v1.30 The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.46 Checking for Chart (v2.1) ok: found v2.4.5 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for MIME-tools (v5.406) ok: found v5.503 Checking for libwww-perl (any) ok: found v6.02 Checking for XML-Twig (any) ok: found v3.41 Checking for PatchReader (v0.9.6) ok: found v0.9.6 Checking for perl-ldap (any) ok: found v0.44 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.20 Checking for SOAP-Lite (v0.712) ok: found v0.715 Checking for JSON-RPC (any) ok: found v0.96 Checking for JSON-XS (v2.0) ok: found v2.32 Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.67) ok: found v3.68 Checking for HTML-Scrubber (any) ok: found v0.09 Checking for Encode (v2.21) ok: found v2.44 Checking for Encode-Detect (any) not found Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found Checking for Apache-SizeLimit (v0.96) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * Encode-Detect * Automatic charset detection for text attachments * * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * * Apache-SizeLimit * mod_perl * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: Encode-Detect: ppm install Encode-Detect TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Apache-SizeLimit: ppm install Apache-SizeLimit Reading ./localconfig... OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for MySQL (v5.0.15) ok: found v5.5.27 WARNING: You need to set the max_allowed_packet parameter in your MySQL configuration to at least 3276750. Currently it is set to 3275776. You can set this parameter in the [mysqld] section of your MySQL configuration file. Removing existing compiled templates... Precompiling templates...done. checksetup.pl complete.

  Read the article

• testing ssl cert for smtps => "secure connection could not be established with this website"

  - by cc young

  testing ssl cert on server using a web service. https, imaps and pop3s all check, but smtps yields the message "we advise you not to submit any confidential or personal data to this website because a secure connection could not be established with this website." running postfix tls logging: connect from s097.networking4all.com[213.249.64.242] lost connection after UNKNOWN from s097.networking4all.com[213.249.64.242] disconnect from s097.networking4all.com[213.249.64.242] these work correctly: telnet mydomain.net 587 openssl s_client -starttls smtp -crlf -connect mydomain.net:587 but cannot get email using ssl to log into either 587 or 564 - get same "UNKNOWN" problem. email smtp w/o ssh works fine. the test site is http://www.networking4all.com/en/support/tools/site+check/

  Read the article

• What does ActiveSync on Android(Nexus One) actually do?

  - by aaronls

  Under the accounts settings of my nexus one I added a Microsoft ActiveSync account and pointed it to our OWA url. It doesn't seem to do anything, and I'm not really sure what it is supposed to do. I have both email sync and contacts sync enabled in the settings, but none of the email I get through outlook shows up on the phone nor are there any contacts added to my contacts list. When I setup the account settings if I type something in wrong it gives me an error, so it is doing something to test the connection, so to some extent I must have it setup right. It just doesn't seem to do anything. What is it actually supposed to do? Where would the contacts and emails show up if it sync'd successfully? How can I test it to ensure I have the correct URL specified?

  Read the article

• My .htaccess file re-directed problems?

  - by Glenn Curtis

  I am hoping you can help me! Below is my .htaccess files for my Apache server running on top of Ubuntu server. This is my local server which I installed so I can develop my site on this instead of using my live site! However i have all my files and the database on my localhost now but each time I access my server, vaio-server (its a sony laptop), it just takes me to my live site! Now eveything is in the root of Apache, /var/www - its the only site I will develop on this system so I don't need to config this to look at any many than this one site! I think thats all, all the Apache files, site-available/default ect are as standard. - Please Help!! Many Thanks Glenn Curtis. DirectoryIndex index.php index.html # Upload sizes php_value upload_max_filesize 25M php_value post_max_size 25M # Avoid folder listings Options -Indexes <IfModule mod_rewrite.c> Options +FollowSymlinks RewriteEngine on RewriteBase / # Maintenance #RewriteCond %{REQUEST_URI} !/maintenance.html$ #RewriteRule $ /maintenance.html [R=302,L] #Redirects to www #RewriteCond %{HTTP_HOST} !^vaio-server [NC] #RewriteCond %{HTTPS}s ^on(s)|off #RewriteRule ^(.*)$ glenns-showcase.net/$1 [R=301,QSA,L] #Empty string RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule>

  Read the article

• Relation between server_name in nginx sites-available, /etc/hosts file and A-records

  - by user2818584

  I have the following two server-blocks in my config-file in sites-available: server { listen 80; server_name www.mydomain.be; root /usr/share/nginx/html; index index.html index.htm; location / { try_files $uri $uri/ =404; } } server { listen 80; server_name sub.mydomain.be; root /usr/share/nginx/sub; index index.html index.htm; location / { try_files $uri $uri/ =404; } } I also created an A-record for both www.domain.be and sub.domain.be with the IP of my server as value. Yet, when I try to reload my nginx configuration with service nginx reload it fails. When I remove the second server-block, it reloads as expected. I know this topic is popular, and that there are loads of such [nginx][subdomain] questions here, but none of them seems to discuss explicitly how the following three things hang together: virtual hosts or server blocks in nginx (est. server_name matching) the effect of A-records on how nginx processes requests the need to add hosts to /etc/hosts Right now I have the impression that a lack of knowledge of this bigger picture, rather than specific knowledge of nginx configuration prevents me from making this work.

  Read the article

• CSS and JS files not being updated, supposedly because of Nginx Caching

  - by Alberto Elias

  I have my web app working with AppCache and I would like that when I modify my html/css/js files, and then update my Cache Manifest, that when the user accesses my web app, they will have an updated version of those files. If I change an HTML file, it works perfectly, but when I change CSS and JS files, the old version is still being used. I've been checking everything out and I think it's related to my nginx configuration. I have a cache.conf file that contains the following: gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header Pragma "public"; add_header Cache-Control "max-age=3600, public, must-revalidate, proxy-revalidate"; } And in default.conf I have my locations. I would like to have this caching working on all locations except one, how could I configure this? I've tried the following and it isn't working: location /dir1/dir2/ { root /var/www/dir1; add_header Pragma "no-cache"; add_header Cache-Control "private"; expires off; } Thanks

  Read the article

• Virtualhost setup, same IP address, different DirectoryIndex's

  - by kaykills

  I am trying to set up 2 virtual host entries in apache but I'm not sure how to accomplish what I want to do. I have two domain names, both pointing to the same IP Address. I need the DirectoryIndex to be different, which is pretty much the only difference in the entries. I have the following set up: <VirtualHost *:80> ServerName firstdomain.com ServerAdmin [email protected] DocumentRoot "/srv/www" DirectoryIndex /portals/site/index.html </VirtualHost> <VirtualHost *:80> ServerName seconddomain.com ServerAdmin [email protected] DocumentRoot "/srv/www" DirectoryIndex /portals/site/index_fr.html </VirtualHost> Not sure what I need to do differently but the second entry doesn't work. The only real difference is I need the second domain to point to a different DirectoryIndex. If there is a better way to accomplish this, your help would be appreciated.

  Read the article

• Custom one-key keyboard shortcuts in Outlook 2010?

  - by cksubs

  I'm a gmail junkie, and one of my favorite features is the keyboard shortcut "a" inside an email to archive the message. I can't remember if that was the default or if I set it to such a quick little keypress, but by now it's totally ingrained in my memory. I'm setting up Outlook 2010 for work, and set up a similar "quick step" to archive, mark as read, and mark as complete any email. It would be great, except for keyboard shortcuts they only give the option for "CTRL + SHIFT + 1" and other number key options. With a keyboard shortcut that convoluted, I'm not going to remember it and might as well just reach for my mouse. Is there any way to set custom keyboard shortcuts for Outlook 2010? I want one-key shortcuts, not 3-keys-at-once!

  Read the article

• Running a home mail server using dynamic dns [closed]

  - by Anand

  Hi, Is it possible to run an email server on my home box using dynamic dns? The scenario is, I want to auto cc all incoming and outgoing emails from my one account to another, from some server side config instead of configuring email clients for rules. I have tried Google Apps Mail but it doesn't allow auto cc of outgoing emails. After having read tons of blogs, forum messages etc (hope I have been reading the correct info :) ) the only option to achieve what I am needing is to setup my own mail server, but the cost of getting a static IP doesn't fit my budget. Please can someone point me in the correct direction. Platform doesn't matter, I can setup a Windows or Linux server. Many Thanks

  Read the article

• Need help completing this Powershell script with some Exchange 2010 commands.

  - by Pure.Krome

  Hi folks. the following powershell script lists all the email aliases I have for a single mailbox. >$mbx = Get-Mailbox myuser >$mbx.EmailAddresses and that lists all the addresses. eg. SmtpAddress : [email protected] AddressString : [email protected] ProxyAddressString : smtp:[email protected] Prefix : SMTP IsPrimaryAddress : False PrefixString : smtp SmtpAddress : [email protected] AddressString : [email protected] ProxyAddressString : smtp:[email protected] Prefix : SMTP IsPrimaryAddress : False PrefixString : smtp SmtpAddress : [email protected] AddressString : [email protected] ProxyAddressString : SMTP:[email protected] Prefix : SMTP IsPrimaryAddress : True PrefixString : SMTP Now to add a new email address, I do the following poweshell command :- $mbx.EmailAddresses += "myEmailAddress.com" $mbx | Set-Mailbox So i'm not sure how i can use the foreach to remove each address? I tried:- @mbx.EmailAddresses | foreach { $mbx.EmailAddresses -= $._SmtpAddress } and that failed miserably. That's my first attempt of PS script, ever :P Can anyone help?

  Read the article

• How to move your Windows User Profile to another drive in Windows 8

  - by Mark

  I like to have my user folder on a different drive (D:) than my OS is (C:). Reading the following post I decided to give it a try. All went quite well, untill I found out that my Windows 8 Apps won't execute anymore (other than that I didn't noticed any problems). My apps do work, while using an account that isn't moved. In the eventviewer I've found error messages like these: App <Microsoft.MicrosoftSkyDrive> crashed with an unhandled Javascript exception. App details are as follows: Display Name:<SkyDrive>, AppUserModelId: <microsoft.microsoftskydrive_8wekyb3d8bbwe!Microsoft.MicrosoftSkyDrive> Package Identity:<microsoft.microsoftskydrive_16.4.4204.712_x64__8wekyb3d8bbwe> PID:<4452>. The details of the JavaScript exception are as follows Exception Name:<WinRT error>, Description:<Loading the state store failed. > , HTML Document Path:</modernskydrive/product/skydrive/App.html>, Source File Name:<ms-appx://microsoft.microsoftskydrive/jx/jx.js>, Source Line Number:<1>, Source Column Number:<27246>, and Stack Trace: ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:27246 localSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:51544 _initSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:54710 getApplicationStatus(boolean) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:48180 init(object) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:45583 Application(number, boolean) ms-appx://microsoft.microsoftskydrive/modernskydrive/product/skydrive/App.html:216:13 Anonymous function(object) Using ProcMon, I see a lot of access denied messages, like these: Date & Time: 12-9-2012 9:32:20 Event Class: File System Operation: CreateFile Result: ACCESS DENIED Path: D:\Users\John\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe\Settings\settings.dat TID: 2520 Duration: 0.0000149 Desired Access: Read Data/List Directory, Write Data/Add File, Read Control Disposition: OpenIf Options: Sequential Access, Synchronous IO Non-Alert, No Compression Attributes: N ShareMode: None AllocationSize: 0 Any idea how to solve this? I noticed that the app folders e.g.: D:\Users\john\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe had a different owner than the old profile folder had. Old profile folder had john as owner where my new profile folder had the Administrators group as owner. Changing this didn't help unfortunately.

  Read the article

• CentOS - Disk Quota X% warning

  - by jfreak53

  I currently have disk quotas working perfectly for Hard Limit Quotas on a CentOS 5 box. Quotas are working fine, but I am looking for a way to alert users either in a Cron or Automatically as Quotas is already running, when they are within X% of their Hard Limit Quota? I would like this email to go out to an email address I configure somehow for each user. I've looked all over the place but can't find it. All I can find is warnquota which only works when a user goes over Quota. The problem is I use Hard Limits, so my users will never go over quota. It needs to warn them when they are within X% of their limits.

  Read the article

• FastCGI on lighttpd no data received

  - by Michael Sh

  I have a simple FastCGI script: public static void main (String args[]) { int count = 0; while(new FCGIInterface().FCGIaccept()>= 0) { count ++; System.out.println("Content-type: text/html\n\n"); System.out.println("<html>"); System.out.println( "<head><TITLE>FastCGI-Hello Java stdio</TITLE></head>"); System.out.println("<body>"); System.out.println("<H3>FastCGI Hello Java stdio</H3>"); System.out.println("request number " + count + " running on host " + System.getProperty("SERVER_NAME")); System.out.println("</body>"); System.out.println("</html>"); } } Set up with lighttpd as: server.modules += ( "mod_fastcgi" ) fastcgi.debug = 1 fastcgi.server = ( "/cgi" => ( "fastcgi" => ("port" => 8888, "host" => "127.0.0.1", "bin-path" => "/var/www/tiny.fcgi", "min-procs" => 1, "max-procs" => 1, "check-local" => "disable" )) ) In the log: 2012-11-24 04:35:04: (mod_fastcgi.c.1367) --- fastcgi spawning local proc: /var/www/tiny.fcgi port: 54321 socket max-procs: 1 2012-11-24 04:35:04: (mod_fastcgi.c.1391) --- fastcgi spawning port: 54321 socket current: 0 / 1 2012-11-24 04:35:39: (mod_fastcgi.c.3061) got proc: pid: 0 socket: tcp:127.0.0.1:54321 load: 1 The problem is that there is no data being sent from the server to browser. Am I missing something here?

  Read the article

• Name typing in the "TO" line for last name recognition

  - by Buck

  I have outlook 2010 on a Windows 7 laptop. When I go to send an email at the "TO" line and I start typing the name, if I start to enter the last name it will not recognize anyone in my contacts and will not auto-populate a list of all the names that fit the description of what I have typed so far. But if I start typing the first name first it will start this auto-choice feature based on what I have typed so far. The company I work for has 20k + employees and If I want to email someone like "Michael Hutch " if I type "Michael" it still gives me like 800 names to chose from. My old laptop that had 2003 Outlook on it, had this functionality. Is there a way to enable this in Outlook 2010?

  Read the article

• Linux Centos - Mail Deamon Preferences

  - by Iestyn

  I keep getting emails from root into my inbox, I get about 30 a day which is annoying as hell and I'm wondering how I can filter these emails down so that I only receive the essential emails. I don't want to have an email every single time I log in via SSH, but when you 30-40 a day sometimes it can get pretty annoying. Is there a section in cPanel or WHM where I can tick or un-tick a section to choose which emails I wish to receive? I also get mail deamon bounce email messages which I'd also like to disable. I've looked and looked, but I think I'm either overlooking something simple or I'm looking in the wrong place.

  Read the article

< Previous Page | 681 682 683 684 685 686 687 688 689 690 691 692  | Next Page >