Search Results

Search found 22000 results on 880 pages for 'worker process'.

Page 686/880 | < Previous Page | 682 683 684 685 686 687 688 689 690 691 692 693  | Next Page >

• How to bypass resume from hibernate [closed]

  - by Daniel Trebbien

  I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

  Read the article

• script calling script as other user

  - by viktor tron

  Using CentOs, I want to run a script as user 'training' as a system service. I use daemontools to monitor the process, which needs a launcher script that is run as root: : #!/bin/bash exec >> /var/log/training_service.log 2>&1 setuidgid training training_command This last line is not good enough since for training_command, we need environment for training user to be set. : su - training -c 'training_command' gives 'standard in must be tty' as su making sure tty is present to potentially accept password. I know I could make this disappear by modifying /etc/sudoers a la Bash & 'su' script giving an error "standard in must be a tty" but i am reluctant and unsure of consequences. : runuser - training -c 'training_command' gives runuser: cannot set groups: Connection refused. I found no sense or resolution to this message. I am stuck. Is this something so hard to achieve? I appreciate all insight and guidance to best practice.

  Read the article

• Refresh file access time under Linux / Discard disk read cache

  - by calandoa

  I am making use of the access time to analyse some build process, but it is not working the way I want: the access time is updated the first time I read the file, then it stays the same for a long while, or until the next reboot. For instance: $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 10:03 some_file $ grep abcdef some_file $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 11:24 some_file # The access time is updated # waiting a few minutes... $ grep abcdef some_file $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 11:24 some_file # The access time has not been updated :( I suppose that the file is buffered by Linux in the free memory, the only this copy is accessed the subsequent times for speed reasons. A solution would be to discard the buffers in memory. After searching some forums, I found: sync echo 1 > /proc/sys/vm/drop_caches echo 2 > /proc/sys/vm/drop_caches echo 3 > /proc/sys/vm/drop_caches But it is not working, it seems that it only sync up the write buffers, not the read ones. May be it is due to some custom kernel configuration on my distro (fedora 9)? Or I am missing something here? Is there a way to achieve this access time refresh? Note also that I do not want to simulate some writes on my entire file tree. Because I am using some makefile based build system, this will cause the entire project to be build again.

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas? Edit: I completely forgot I'd asked this question until harrymc posted his answer. I've since found out that to fix this problem, I need to disable my Local Area Connection and re-enable it. Once I do that I have no trouble making network connections until the next time I reboot at which point I repeat the process. It's annoying, but manageable since I reboot very infrequently.

  Read the article

• Will Parallel-port dongle work on USB-to-Parallel Adapter?

  - by Gary M. Mugford

  We have a niche program running on a Win2K laptop that uses a security dongle connected to a parallel port for authentication. The laptop is getting creaky and I spent a frustrating night last night shopping various websites for a new laptop that had a parallel port. Seems I'm about three years late [G]. The question I have, is, if I buy a new(ish) laptop and use a USB-to-Parallel Port adapter, will the security dongle work? I know I'm not being specific about the app, but it's one most people wouldn't have heard of anyways. I've been guessing the answer to my question is no, since the app won't know to send a request out to the non-existent port. But, if the process actually is that the dongle sends a message INTO the computer every now and then, then it might work. And, I'm not sure whether the dongle is only needed at program startup time or randomly. The dongle is a 'permanent' addition to the old laptop. This is all about the money. We can have a newly-updated version of the program (which won't add any features we need) for the princely sum of $2700. Or we can spend $500 on a refurbed laptop still running WinXP, add a 30 buck adapter and keep the same solid, stolid performance we've come to appreciate. But it all comes down to the dongle behaviour. Oh, and a dock won't work. The whole laptop issue is about moving about the various nooks and crannies of the building with laptop in hand. Thanks for any suggestions/guidance. GM

  Read the article

• Passenger throwing undefined method `-@' for "master":String after Puppet 3.0.0 upgrade

  - by Andy Shinn

  My Puppet master is using Passenger to serve. After upgrading to Puppet 3.0.0 I am getting the following error: [ pid=17576 thr=70231398486460 file=utils.rb:176 time=2012-10-01 17:37:12.892 ]: *** Exception NoMethodError in PhusionPassenger::Rack::ApplicationSpawner (undefined method `-@' for "master":String) (process 17576, thread #): from config.ru:7 from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `instance_eval' from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `initialize' from config.ru:1:in `new' from config.ru:1 My config.ru is as follows: # a config.ru, for use with every rack-compatible webserver. # SSL needs to be handled outside this, though. # if puppet is not in your RUBYLIB: # $LOAD_PATH.unshift('/opt/puppet/lib') $0 = "master" # if you want debugging: # ARGV << "--debug" ARGV << "--rack" # Rack applications typically don't start as root. Set --confdir to prevent # reading configuration from ~/.puppet/puppet.conf ARGV << "--confdir" << "/etc/puppet" # NOTE: it's unfortunate that we have to use the "CommandLine" class # here to launch the app, but it contains some initialization logic # (such as triggering the parsing of the config file) that is very # important. We should do something less nasty here when we've # gotten our API and settings initialization logic cleaned up. # # Also note that the "$0 = master" line up near the top here is # the magic that allows the CommandLine class to know that it's # supposed to be running master. # # --cprice 2012-05-22 require 'puppet/util/command_line' # we're usually running inside a Rack::Builder.new {} block, # therefore we need to call run *here*. run Puppet::Util::CommandLine.new.execute Any idea what may be happening?

  Read the article

• What is preventing my computer from going idle?

  - by brianberns

  When I first boot my Windows 7 computer, it will go idle if I stop using it - first the screensaver comes on, then the computer goes to sleep after a certain amount of time. This is the expected behavior. However, after I've used the computer for awhile without rebooting (after about a day or so), I've noticed that it stops going idle - the screensaver won't come on, and the computer won't sleep, no matter how long it sits unused. I've confirmed that the idle timer is increasing as expected via GetLastInputInfo. However, it looks like something is interfering with the results from CallNtPowerInformation. Every 14 or 16 seconds, the TimeRemaining value jumps back up to its maximum value when I query SystemPowerInformation. I've used the SysInternals Process Monitor to detect any unusual events that might be happening to trigger this reset, but come up empty. Does anyone know exactly what are the possible causes of TimeRemaining resetting to its maximum value? I'm fairly sure that it's not my mouse, keyboard, or network sending spurious events, because I've disabled each one and the problem continues to occur. This would also reset the GetLastInputInfo timer, which is not happening. I'm looking for something that affects SystemPowerInformation TimeRemaining, but does not affect GetLastInputInfo. Thanks.

  Read the article

• OS X random, jumpy dragging behavior

  - by Chris

  This problem has been going on since I got 10.7, and is persisting or even getting worse since I updated to Mavricks. The best way to describe it is thru an example- Let's say I'm working in Safari. Everything is working fine. Then, I'll switch to another app by clicking on it's window, for example, I'll click on Messages to shoot back a reply. When I click back to Safari, keyboard and mouse inputs don't work! The only way I can regain control of the app (Safari) is by clicking on the apps top bar, which then causes the app to jump left or right. If I'm in Messages and I switch back to Safari by clicking said top bar, it works fine. Same with switching back and forth using command-tab. I've narrowed the problem down to this - the first app (Safari, in this example) is, for some reason, deciding that I'm in the process of dragging the window around. This could be just an oddly persistent glitch in my system, but has anyone else seen this before? Perhaps a misplaced default write... somewhere along the line? Update A PRAM reset did absolutely nothing

  Read the article

• Google Desktop Search problems - unable to disable indexing and no index status page

  - by Howiecamp

  I've been running Google Desktop (I've used both the regular and Enterprise versions) without issues on my Windows 7 64-bit PC for a long time with no issues. I just paved my PC and reinstalled Google Desktop (regular edition). Initially, I want to use it only for the CTRL-CTRL launcher capability - I don't want it to do any indexing. So I unchecked all the items in the configuration dialog as well as excluded c:. Despite this, it is indexing all the content on my hard drive as well as Outlook email, etc. In my previous installations I had the same options set and they worked properly. The other problem I have is that when you right-click on the Google Desktop system tray icon, there used to be an option for "Index Status" which showed you the percentage complete the index creation process was, as well as an option to clear and rebuild the index. Those are no longer there. I uninstalled the regular edition and installed the Enterprise Edition, but same problems. Any ideas?

  Read the article

• PHP 5.3.5 Windows installer missing php_ldap.dll

  - by nmjk

  I'm working with Windows Server 2008, Apache 2.2. I'm using php-5.3.5-Win32-VC6-x86.msi as the installer, using the threadsafe version. I've gone through the install process four or five times just to make sure that I'm not missing anything ridiculous, but I don't think I am. The problem is that the php_ldap.dll extension simply doesn't seem to exist. It's not present in the installer interface (where the user is asked to choose which extensions to install), and it definitely doesn't appear in the ext/ directory after install. I found a lot of mentions of this issue for 5.3.3, including links to download the extension individually. Those links no longer exist, of course, and besides: they were for 5.3.3. I'd really rather use an extension that belongs with PHP 5.3.5. Anyone else encounter this problem? Any ideas as to what's going wrong? Anyone seen acknowledgement by the PHP folks that the file is indeed missing, and that it's an oversight? It's quite a frustration because the server I'm building has no purpose if I don't have PHP LDAP support. Cheers all, and thanks in advance for your assistance.

  Read the article

• Rails 3 passenger nginx application spawner server error on Synology NAS

  - by peresleguine

  Question updated, please read UPD2. I'm trying to deploy app through passenger nginx module on DS710+ (ruby 1.9.2p0 installed). There is syntax error relative to has_and_belongs_to_many_association.rb file. Please look at the screenshot(deleted, question updated). I'm pretty sure the problem isn't in library file. App is running good via webrick. Could you please advise what to look for? UPD1 ruby -v ruby 1.9.2p0 (2010-08-18 revision 29036) [i686-linux] gem list -d passenger *** LOCAL GEMS *** passenger (3.0.6) Author: Phusion - http://www.phusion.nl/ Rubyforge: http://rubyforge.org/projects/passenger Homepage: http://www.modrails.com/ Installed at: /usr/lib/ruby/gems/1.9.1 Easy and robust Ruby web application deployment UPD2 I've decided to reinstall everything. It solved previous problem but caused another one. The error is: The application spawner server exited unexpectedly: Unexpected end-of-file detected. Here is screenshot. New output: ruby -v ruby 1.9.2p180 (2011-02-18 revision 30909) [x86_64-linux] gem list -d passenger *** LOCAL GEMS *** passenger (3.0.7) Author: Phusion - http://www.phusion.nl/ Rubyforge: http://rubyforge.org/projects/passenger Homepage: http://www.modrails.com/ Installed at: /usr/lib/ruby/gems/1.9.1 Nginx error.log: [ pid=5653 thr=32771 file=ext/common/Watchdog.cpp:128 time=2011-04-20 14:08:34.505 ]: waitpid() on Phusion Passenger helper agent return -1 with errno = ECHILD, falling back to kill polling [ pid=5654 thr=49156 file=ext/common/Watchdog.cpp:128 time=2011-04-20 14:08:34.506 ]: waitpid() on Phusion Passenger logging agent return -1 with errno = ECHILD, falling back to kill polling 2011/04/20 14:12:33 [notice] 7614#0: signal process started

  Read the article

• tail -f and then exit on matching string

  - by Patrick

  I am trying to configure a startup script which will startup tomcat, monitor the catalina.out for the string "Server startup", and then run another process. I have been trying various combinations of tail -f with grep and awk, but haven't got anything working yet. The main issue I am having seems to be with forcing the tail to die after grep or awk have matched the string. I have simplified to the following test case. test.sh is listed below: #!/bin/sh rm -f child.out ./child.sh > child.out & tail -f child.out | grep -q B child.sh is listed below: #!/bin/sh echo A sleep 20 echo B echo C sleep 40 echo D The behavior I am seeing is that grep exits after 20 seconds , however the tail will take a further 40 seconds to die. I understand why this is happening - tail will only notice that the pipe is gone when it writes to it which only happens when data gets appended to the file. This is compounded by the fact that tail is to be buffering the data and outputting the B and C characters as a single write (I confirmed this by strace). I have attempted to fix that with solutions I found elsewhere, such as using unbuffer command, but that didn't help. Anybody got any ideas for how to get this working how I expect it? Or ideas for waiting for successful Tomcat start (thinking about waiting for a TCP port to know it has started, but suspect that will become more complex that what I am trying to do now). I have managed to get it working with awk doing a "killall tail" on match, but I am not happy with that solution. Note I am trying to get this to work on RHEL4.

  Read the article

• Slow Citrix connection related to mapped network drives

  - by George

  I have this weird issue with Citrix being slow and maybe users just being a little dramatic, but I am curious as to why that happens. Let me give you a little bit of a background. Citrix is running off of Windows 2003 server, TSprofiles and file server were located on the same server, until recently. We have moved our file server over to a new server with tons of space. We have Citrix on one server, TSprofiles on another and file server on third. We are using logon scripts to map home drives, shared drive and etc. Now, up until we made the file server move, the logon process took several seconds and most users couldn't even notice logon script being executed as they logon. Now, it takes upwards of several minutes and users can see logon script being executed at a slow pace, one line at a time. The only new variable in this whole scenario is the new file server. All the servers are physically located in the same location and on the same subnet. So, I guess my question is, if anyone can explain why a sudden sluggishness? And any tools I can use to troubleshoot the issue? Thanks!

  Read the article

• Millions of SYN_RECV connections, no DDoS

  - by ThomK

  We have such server structure: reverse proxy (nginx) - worker (uwsgi) - postgresql / memcached. All servers are in local network behind router, with NATed external ip:ports (http/s 80/443 to proxy, and ssh 22 to all servers). Problem is, that sometimes proxy server netstat reports MILLIONS of SYN_RECV connections. From same IP / same ports. Like that: nginx ~ # netstat -n | grep 83.238.153.195 tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV [...] And this is not DDoS, because all IPs affected belongs to our website users. On side note, users says that it's not affecting them. Website is online and working, but... that particular one (from example above) told me that website is down and Firefox can't connect. I've done tcpdump. 19:42:14.826011 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:14.826042 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:17.887331 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:17.887343 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:19.065497 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:23.918064 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:23.918076 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:25.265499 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:37.265501 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:37.758051 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:37.758069 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:40.714360 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:40.714374 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:41.665503 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:46.751073 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:46.751087 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:47.665498 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:59.865499 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:01.265500 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:13.320382 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:13.320399 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:16.320556 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:16.320569 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:17.665498 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:22.250069 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:22.250080 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:23.665500 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:23.865501 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:35.665498 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:37.903038 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:37.903054 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:40.772899 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:40.772912 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:41.865500 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:46.793057 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:46.793069 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:47.865500 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:49.465503 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 Anyone have some thoughts on that?

  Read the article

• Running Jackd on Ubuntu for my External Firewire Sound card

  - by Asaf

  Hello, I'm running Ubuntu 10.04 and I have an external Sound card: Phonic Firefly 302. I've connected the device, installed Jackd, added the lines: @audio - rtprio 99 @audio - memlock 500000 @audio - nice -10 to /etc/security/limits.conf logged out, logged back in, ran qjackctl (sudo qjackctl to be exact), ran the settings and chose "firewire" on the driver option, pressed "Start" and that was the output: 20:10:19.450 Patchbay deactivated. 20:10:19.578 Statistics reset. 20:10:19.601 ALSA connection graph change. 20:10:19.828 ALSA connection change. 20:10:21.293 Startup script... 20:10:21.293 artsshell -q terminate sh: artsshell: not found 20:10:21.695 Startup script terminated with exit status=32512. 20:10:21.695 JACK is starting... 20:10:21.695 /usr/bin/jackd -dfirewire -r44100 -p1024 -n3 jackd 0.118.0 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details 20:10:21.704 JACK was started with PID=22176. no message buffer overruns JACK compiled with System V SHM support. loading driver .. libffado 2.0.0 built Mar 31 2010 14:47:42 firewire ERR: Error creating FFADO streaming device cannot load driver module firewire no message buffer overruns 20:10:21.819 JACK was stopped successfully. 20:10:21.819 Post-shutdown script... 20:10:21.822 killall jackd jackd: no process found 20:10:22.230 Post-shutdown script terminated with exit status=256. 20:10:23.865 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Error: "/tmp/kde-asaf" is owned by uid 1000 instead of uid 0.

  Read the article

• BIOS corrupted? How to proceed? Acer Travelmate 290

  - by dtlussier

  I have a older ACER Travelmate 290 (manufactured in 2002 or 2003), which I recently tried to upgrade to Ubuntu 9.10. After doing the upgrade process it appeared as if I had a problem with my x server configuration, as on the first reboot post-install I heard the Ubuntu startup sound, but had a black screen. I thought I would then reboot again to drop down into text-mode to trouble shoot the x configuration problem. However, when I tried rebooting, something went wrong and since then when I start up the machine I get absolutely nothing except the first hardware check (i.e. HDD light flashes, CD/DVD drive spins, etc.). Other than that the screen remains totally black and I have no HDD or processor activity at all. I have tried restarting it a number of time holding down all kinds of key combinations to try and coax it into the BIOS (if possible) with no luck. I have also tried putting in both a live Linux disc and a Windows install disk without any luck. With a disk in the drive it will spin for a few seconds and then stop. All this has lead me to suspect that the BIOS is somehow corrupt (not sure about the right terminology). I have tried putting a new BIOS image and installer program downloaded from ACER on a USB key to see if it will run when I start up the machine, but no luck. I'm not sure if this method of interacting/updating/flashing the BIOS will work outside of Windows/DOS as both OSs are mentioned kind of ambiguously in the documentation. I have also taken the laptop case apart and inspected the various cards and cannot find any obviously burned out components. I'm not sure how to proceed at this point in terms of components to try, or how to try and load a new BIOS image onto the board. Any advice here would be great, especially from those with experience with this particular line of laptops. Thanks!

  Read the article

• How can I debug user mode driver failures in Windows 8

  - by Tom

  I have a 32 GB SD Card. Whenever I insert this card in to my newly upgraded Windows 8 laptop the OS stops responding normally. Metro Apps won't work. The system may or may not log in. Desktop apps may or may not be able to do things. When I remove the card and restart then all is fine. As soon as I put the card back in, the system starts misbehaving again. I've run Windows Update, so I have the latest drivers from Microsoft. This does not occur with the 8 GB cards I have. Unfortunately I only have one 32 GB card, so I can't test with others. From examining the system event log I've determined this is happening due to a user mode driver failure. How can I best debug this issue from here? How can I figure out which driver this is related to? Will there be a Dr. Watson crash dump somewhere? Details - System - Provider [ Name] Microsoft-Windows-DriverFrameworks-UserMode [ Guid] {2E35AAEB-857F-4BEB-A418-2E6C0E54D988} EventID 10110 Version 1 Level 1 Task 64 Opcode 0 Keywords 0x2000000000000000 - TimeCreated [ SystemTime] 2012-10-29T00:51:57.532718300Z EventRecordID 40417 Correlation - Execution [ ProcessID] 1056 [ ThreadID] 3796 Channel System Computer thebrain - Security [ UserID] S-1-5-18 - UserData - UMDFHostProblem [ lifetime] {811E3DC4-FBC6-420B-ABCC-AD7505A36F3B} - Problem [ code] 3 [ detectedBy] 2 ExitCode 3 - Operation [ code] 259 Message 72448 Status 4294967295 Edit 1 So I tried using Debug View from SysInternals (you can get it here: http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx). That gave me this information: which is not especially helpful. Then I tried connecting WinDbg to WUDFHost.exe (the process that seems to host user mode drivers) to see if it could catch the error. Get it here: http://msdn.microsoft.com/en-US/windows/hardware/hh852363 Instructions: http://msdn.microsoft.com/en-US/library/windows/hardware/ff554716(v=vs.85).aspx That didn't help much. It didn't catch any exceptions as I'd hoped (which would point me to the cause of the crash at least). Here's the stack of one of the threads:

  Read the article

• How to prevent getting infected by rogue security applications

  - by Ieyasu Sawada

  My computer never got infected with a virus before, because I'm using Web of Trust browser plugin, sandboxie and Avast Free antivirus. But today, it got infected with a rogue security application called antivirus.net. I have already removed it using MBAM, SAS, and Kaspersky Virus Removal Tool. And by the way, I was using MSE when my laptop got infected. Seems like the rogue application just killed off the MSE process. And I never even got a warning. I was using the wi-fi from our school, which I think is the cause since most of the computers in our laboratory has rogue applications on it. My question is, how do I prevent this from happening again? It took me about 6 hours to disinfect my computer and I don't want it to happen again. Please enlighten me if these rogue applications really just pop out of nowhere. Note I'm not dumb enough to agree with installing rogue security applications. It just came out of nowhere. I'm happy with MSE, well not after it let antivirus.net penetrate my computer. I've done a little bit of research and it says that it needs the permission of the user to actually install it in the computer: http://www.net-security.org/malware_news.php?id=1245 http://en.wikipedia.org/wiki/Rogue_security_software Is it possible that other computers in our school network have agreed to install those? Or maybe the network admin?

  Read the article

• Speeding up Outlook Express on Windows XP over satellite

  - by John

  My brother is in the field with Doctors Without Borders. I'm posting this question on his behalf. We use outlook express (on a pc running windows XP) and a 9600 baud dial up satellite phone modem to get our email direct from the server in Paris. As this is a very expensive way to communicate (our satellite bill is $50K a year, no joke), it seems like trying to streamline is a good idea. Here's the question- when we connect, the sequence goes: Send outbox mails. This goes pretty quickly, probably 10-15 seconds for each email, up to maybe a couple minutes for an email of 150k or so). The status bar moves pretty quickly, according to the emails sent. The system then says "Checking for new messages on (our account name), and "Receiving list of messages from server". This takes a long time. Like 10-15 minutes. The status bar crawls along. Then it receives the messages. "Receiving messages from server". Again, each message takes 10-15 seconds, and this part moves along reasonably fast. I'm curious as to what is going on in the second part. It takes forever, and doesn't seem to be part of the sending or receiving messages themselves. Is there a way to speed up the process by changing a preference with communicating with the server or something? Does anyone have any advice for him speeding up what Outlooks Express is doing? Obviously his software is ancient and adding more software is not realistic based on the connection speed. Thanks!

  Read the article

• Dropbox failing to update?

  - by Mick

  I have two PC's at home. One XP the other Windows 7-64bit. I have a word document that I edit on either PC - to enable this I have the file stored in a Dropbox folder. This usually works fine - but sometimes I find that the file does not get updated on my windows7 PC. I.e. I edit the file on my Windows XP machine, then go to my Windows 7 PC and see that there is a previous, old, datestamp on the file and sure enough if I open up the file to have a look, I see that the latest edits are not included. If I right-click on the file and select "Browse on Dropbox website" I see that the latest file is correctly there. Surely there must be some option to say please update this file - but can find no such thing. Has something gone wrong? I should point out that my wireless internet connection is a little intermittent - could this have caused some glitch? By the way I do not leave the old file open in word on my Windows-7 PC as I can well imagine that would cause trouble. Also I should mention that the icon on the document has the little green tick on it showing that Dropbox is not in the process of doing a transfer. Also the Dropbox icon in my system tray also has the green tick - so Dropbox is not busy transferring some other file(s). If I hover the mouse over the Dropbox icon I get the tooltip "All files up to date".

  Read the article

• Server Restart's and Respective Orders

  - by TheD

  EDIT:Not meaning to be disrespectful to any of the answers, but, the main question was whether rebooting a DC at the beginning of a cycle, then all the other servers, or rebooting it at the end once all the others are back online - is there a reason for doing it either way? I'm still not sure based on current responses. This will most likely seem like a fairly, maybe even stupid, question, but it's something I have been wondering about. As part of a regular process for clients servers are restarted remotely after patches and every client tends to have a similar order - but there always seems to be a small debate when it comes down to when do you reboot your DC. For example, 4 servers, 1 DC, 1xExchange, 1xBESX and 1xRandom, lets say it has some CRM software installed, is it best to reboot the DC first, then Exchange, then BESX and so on - or reboot all the servers, then reboot the DC last? - Perhaps it doesn't matter at all and it's just a case of how you have always done it. Would it change in a Hyper-V environment for example, with a physical DC, 1 VHost with all your servers virtualised on that Host? Rebooting the VHost and Virtual Machines first, then the DC at the end, or vice versa? Thanks!

  Read the article

• SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

  - by Dan

  I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

  Read the article

• MsMpEng.exe (Windows Defender?) uses a lot of CPU at startup and runs two instances on a single core

  - by dlamblin

  I'm using Windows XP Professional SP2 on a single core AMD64 processor, and I've got two instances of MsMpEng.exe starting up when I start up and log in. They use 64MB and 32MB of ram and 140MB and 80MB of virtual memory, and fluctuate around 80% CPU usage for about 5 minutes at start up. They are (I read) associated with Windows Defender, but I'm concerned about: There's two of them, everything I read generally has only one reported. They might be scanning each other, and I want that to stop. They might be getting scanned by avgrsx.exe (AVG Free 8) (uses about 16Mb v ram) They might also be scanning moe.exe (assosciated with ms live mesh, which I'm considering getting rid of) Lastly I have Microsoft Security Essentials. I don't know the process name associated there. The main concern of mine (apart from the double instances) is that these are all trying to prioritize scanning each other at once except maybe moe.exe. This might seem legitimate but is likely a useless drain on resources. Have I made a mistake in having all of these installed, or is there a way to inform them not to do whatever they're doing that's taking about 5+ minutes at start up? [I also have Google Desktop, but I'm keeping that.] Comment if none of this makes sense to you.

  Read the article

• Ventrilo sound delay issue in Windows 7

  - by TM

  I've upgraded my machine to Windows 7 Professional (x64) (using format + clean install, not upgrade install). Everything seems to work fine except for Ventrilo. I used to have Vista Business x64 and Ventrilo worked fine there, on the same machine. The issue I am having is that when I am playing a game and using Ventrilo, everything works fine at first, but after a few minutes, I stop hearing anything that people say. If I minimize, I can see the speaker icons lighting up (meaning that people are talking), but I still can't hear anything. The sounds from the game and other OS sounds still play through the speakers just fine. Eventually, I will close ventrilo and then after a few seconds I will start hearing things that people were saying several minutes ago. I start hearing everything that was said, with no "silent time" in between. Note that the sounds keep playing even AFTER the ventrilo process is dead. I've tried using Ventrilo x64 and x86 versions. Does anyone have any advice on how to fix this problem?

  Read the article

• SSH client and Command Prompt replacements Windows look-and-feel

  - by Oddthinking

  The Problem I've worked exclusively in Windows. I can handle that. I've worked exclusively in DOS (a long time ago!). I can handle that. I've worked exclusively in Unix. I can handle that. Right now, I am developing a command-line (python) application on a Windows machine, testing it in a DOS box (i.e. Windows' Command prompt), and then deploying it to Linux, and running it with PuTTY. I cannot handle that. My productivity drops dramatically when CTRL-C cuts in one window (Windows) and kills the process in another (DOS, Linux). My productivity drops dramatically when Enter copies the selection in one window (DOS), and deletes the selection in another (Windows), and runs the current half-edited command in the third (PuTTY). My productivity drops dramatically when I cannot hit Undo, Home or End. The Solution I am Seeking An SSH/Bash command-line client that runs on Windows and, to the extent possible, uses all the standard Windows shortcuts (Cut, Copy, Paste, Undo, Home, End, Insert, Shift-Arrows, etc.) work on a bash command line. Bonus points if it puts the cursor between letters, rather than on them. Plus, an equivalent DOS command-line drop-in that runs on Windows, and provides the same interface. I appreciate there may need to be special buttons to actually transfer CTRL codes (like CTRL-C) through in the cases I need them. I suspect the SSH client will need to be specific to a shell (so it knows when it is at the command prompt, and when it is inside a running app.) I know there are many SSH clients, but I am looking for advice for a particular need. PuTTY feels like an escape route for Unix programmers stuck on Windows. I am the opposite. Can anyone recommend one (or maybe a combination of an SSH client and an Command-Line replacement)?

  Read the article

< Previous Page | 682 683 684 685 686 687 688 689 690 691 692 693  | Next Page >