Search Results

Search found 24201 results on 969 pages for 'andrew case'.

Page 687/969 | < Previous Page | 683 684 685 686 687 688 689 690 691 692 693 694  | Next Page >

• Raid-1 Western Digital Green AARS, cloning and WD Align Utility

  - by Jaguar

  Hello all, My current setup runs on top of 2x Western Digital 2500KS drives on Raid-1, using the motherboard's 780G raid controller, on WinXP. Everything is fine, but the drives are a bit noisy. I am considering buying 2x WD6400AARS disks which are the 640GB slower 'green' drives, but also feature the Advanced Formatting 4KB sectors. This means that for WinXP the partition will have to be aligned to work properly, else there is a performance penalty. There are 2 questions here: The Green drives from WD are all slower and are (according to WD) susceptible to drop-out's from the controller. Has anyone any experience in this matter? Is there a possibility the controller will drop a drive? If so, can i do anything about it? Secondly, western digital gives a utility to perform the alignment on the partition. The thing is, will the utility see the drives in question as the operating system only sees 1 logical disk? I will be making the transition using a cloning tool (most probably norton ghost) unless i don't find a solution or a clear answer, in which case i'll just buy a win 7 license and make a clean install... thx in advance

  Read the article

• Cygwin, ssh, and git on Windows Server 2008

  - by Paul

  Hi everyone. I'm trying to setup a git repository on an existing Windows 2008 (R2) server. I have successfully installed Cygwin & added git and ssh to the packages, and everything works perfectly (thanks to Mark for his article on it). I can ssh to localhost on the server, and I can do git operations locally on the server. When I try to do either from the client, however, I get the "port 22, Bad file number" error. Detailed SSH output is limited to this: OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to {myserver} [{myserver}] port 22. debug1: connect to address {myserver} port 22: Attempt to connect timed out without establishing a connection ssh: connect to host {myserver} port 22: Bad file number Google tells me that this means I'm being blocked, usually, by a firewall. So, double-checked the firewall settings on the server, rule is there allowing port 22 traffic. I even tried turning off the firewall briefly, no change in behavior. I can ssh just fine from that client to other servers. The hosting company swears that there's no other firewalls blocking that server on port 22 (or any other port, they claim, but I find that hard to believe). I have another trouble ticket into them, just in case the first support person was full of it, but meanwhile I wanted to see if anyone could think of anything else it can be. Thanks, Paul

  Read the article

• stunnel client uses improper SNI when talking to Apache

  - by Huckle

  I have stunnel listening on port 80 and acting as a client connecting to Apache listening on port 443. Configuration is below. What I'm finding is that if I attempt to connect to localhost:80 the connection is fine but if I connect to 127.0.0.1:80 When I check Apache's logs it indicates that stunnel is using localhost as the SNI both times, but the HTTP request lists localhost in one case and 127.0.0.1 in another. Is it possible to tell stunnel to either use whatever is in the HTTP request or to somehow configure two clients each with different SNI values? stunnel.conf: debug = 7 options = NO_SSLv2 [xmlrpc-httpd] client = yes accept = 80 connect = 443 Apache error.log: [error] Hostname localhost provided via SNI and hostname 127.0.0.1 provided via HTTP are different Apache access.log: "GET / HTTP/1.1" 200 2138 "-" "Wget/1.13.4 (linux-gnu)" "GET / HTTP/1.1" 400 743 "-" "Wget/1.13.4 (linux-gnu)" wget: $wget -d localhost ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: localhost Connection: Keep-Alive ---request end--- $wget -d 127.0.0.1 ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: 127.0.0.1 Connection: Keep-Alive ---request end--- edit: Apache Config Nothing out of the ordinary, it's just a virtual host listening to 443 <VirtualHost *:443>

  Read the article

• Run script before shutdown/restart

  - by dtbarne

  I'd like to run a PHP script when an instance is told to shutdown, but of course before it actually finishes shutting down. My particular script is just looking to push some log files from the local partition to a another server. I've got the gist of how this process works, but I need some clarification. How I understand it. Please correct me if I'm wrong. Create an executable script in /etc/init.d (lets call it /etc/init.d/push-logs) Create a symlink to /etc/init.d/push-logs from /etc/rc0.d (shutdown) and /etc/rc6.d (reboot). The name should be KXXpush-logs Here's my questions: Of course - am I understanding correctly? For #2 above - it sounds like the lower the XX the better - is there too low a number I can use? Does it matter if it shares a number with another script? Does the script in /etc/init.d/push-logs HAVE to follow the standard init.d template (supporting start/stop, etc. commands)? This doesn't really apply to my use case. If possible I just want the script to be the following: #!/bin/sh # # Run PHP file prior to shutdown # /usr/bin/php /path/to/php_file.php

  Read the article

• Running multiple services on different servers with IPv6 and a FQDN

  - by Mark Henderson

  One of the things NAT has permitted us to do in the past decade is split physical services onto different servers whilst hiding behind a single interface. For example, I have example.com behind a NAT on 192.0.2.10. I port-forward :80 and :443 to my web server. I'm also port forward :25 to my mail server, and :3389 to a terminal server and :8080 to the web interface of my computer that downloads torrents, and the story goes on. So I have 5 port forwardings going to 4 different computers on example.com. Then, I go and get me some neat IPv6. I assign example.com an IPv6 address of 2001:db8:88:200::10. That's great for my websites, but I want to go to example.com:8080 to get to my torrents, or example:3389 to log on to my terminal server. How can I do this with IPv6, as there is no NAT. Sure, I could create a bunch of new DNS entries for each new service, but then I have to update all my clients who are used to just typing example.com to get to either the website or the terminal server. My users are dumber than two bricks so they won't remember to connect to rdp.example.com. What options do I have for keeping NAT-style functionality with IPv6? In case you haven't figured it out, the above scenario is not a real scenario for me, or perhaps anyone yet, but it's bound to happen eventually. You know, with devops and all.

  Read the article

• Dual Xeon Server voltages are low

  - by Mindflux

  I've got a whitebox server running CentOS 5.7. It's a Dual Xeon 5620, 24GB of RAM. The mainboard is a SuperMicro X8DT6-F and the chassis is a SC825TQ-R720LPB. Dual 720W Power supplies. We had a big power outage a couple weeks back that took down everything, I don't have any pre-power outage figures for this server, and the only reason I noticed these is because when I was bringing up the servers I was checking them out with more scrutiny than usual. http://i.imgur.com/rSjiw.png (Image of voltage readings) As you can see, CPU1 DIMM is low, +3.3V is high, 3.3VSB is high, +5v is high, +12v is REAL LOW (out of normal 5% (plus/minus))... and VBAT is off the charts. With my whitebox VAR we've tried the following: Swap out PSU with another server I have with the same PSUs. Try different power cord Update BMC/IPMI firmware in case readings were wrong (They aren't) Update BIOS Try different PDU Try a different outlet and/or circuit Replaced Voltage Regulator Unit At this point, the only thing we haven't done, seemingly is replace the mainboard.. which is what the next step will be unless something else shines some light on the situation. I should mention the system is rock solid otherwise which is a surprise given the 12v voltage is that far off.

  Read the article

• What causes "A disk read error occurred, Press Ctrl + Alt + Del to restart"?

  - by Mehrdad

  I have a virtual machine containing Windows XP SP3. When I resized the VHD file (and the embedded partition), and tried booting, I got: A disk read error occurred Press Ctrl + Alt + Del to restart Some notes: FixBoot and FixMBR don't help. ChkDsk doesn't help. The partition is indeed active. The partition starts at sector 63 (it also did so before the problem) of cylinder 1, head 1, and is marked as type 0x07 (NTFS) My host OS reads the VHD and the partition completely fine I'm interested in knowing the cause rather than the fix. So "re-format the disk", "reinstall Windows", etc. aren't valid solutions. It's a virtual machine after all... I have nothing to lose, so I don't care about fixing it. I just want to know what's causing this problem, in case I run into it again on a physical machine (which I have done before). More info: The layout of the original, dynamic VHD (which works correctly): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 127.00GB CHS: 16578 255 63 ¦ ¦ Sectors: 266338304 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+ The layout of the resized, fixed-size VHD (which doesn't work): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 1.50GB CHS: 196 255 63 ¦ ¦ Sectors: 3149824 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• sudo ./starling start works well but sudo service starling start fails

  - by Keating Wang

  sudo ./starling start works well but sudo service starling start fails $ sudo ./starling start * Starting Starling Server... [ OK ] $ sudo ./starling stop * Stop Starling Server... [ OK ] $ sudo service starling stop * Starting Starling Server... /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems/dependency.rb:247:in `to_specs': Could not find starling (>= 0) amongst [minitest-1.6.0, rake-0.8.7, rdoc-2.5.8] (Gem::LoadError) from /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems/dependency.rb:256:in `to_spec' from /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems.rb:1229:in `gem' from /home/keating/.rvm/gems/ruby-1.9.2-p290/bin/starling:18:in `<main>' The error above is 'cannot find gem starling' Following the starling file(located in /etc/init.d, rwxrwxrwx): set -e LOGFILE=/var/log/starling/starling.log SPOOLDIR=/var/spool/starling PORT=22122 LISTEN=127.0.0.1 PIDFILE=/var/run/starling.pid NAME=starling DESC="Starling" INSTALL_DIR=/home/keating/.rvm/gems/ruby-1.9.2-p290/bin/ DAEMON=$INSTALL_DIR/$NAME SCRIPTNAME=/etc/init.d/$NAME OPTS="-d" . /lib/lsb/init-functions d_start() { log_begin_msg "Starting Starling Server..." start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- $OPTS || log_end_msg 1 log_end_msg 0 } d_stop() { log_begin_msg "Stopping Starling Server..." start-stop-daemon --stop --quiet --pidfile $PIDFILE || log_end_msg 1 log_end_msg 0 } case "$1" in start) d_start ;; stop) d_stop ;; restart|force-reload|reload) d_stop sleep 2 d_start ;; *) echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" exit 3 ;; esac exit 0

  Read the article

• iTunes Home Sharing only works one way between 2 WinXP PC's on the same LAN

  - by scunliffe

  Both PC's have the latest iTunes installed. PC (A) can "see" that there is a shared library "B library" but attempts to connect to it return this error message: The shared library "{Username}'s Library" is not responding (-3259) Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689. however the reverse works fine. e.g. PC (B) can "see" shared library "A library" and can access all content. Notes: Both PC's have Home Sharing enabled (turned off/on several times to verify). Both PC's have Windows Firewall turned on, but in the exceptions tab, iTunes is allowed, and Port 3689 is also added as a firewall exception (just in case) Both iTunes accounts have been "authorized" on both PC's Both PC's connect via LAN via D-Link DIR-615 router. In the advanced application rules, iTunes has also been added to allow traffic on port 3689 un-hindered. Is there any other magical setting/configuration option that I should be aware of and set in order to get this to work? I could care less about sharing apps etc. I just want the music sharing to work. Update: Solved! It turns out on PC (B) there were multiple accounts set up. 1 of the accounts had the checkbox checked under the windows firewall "On" option which states "No exceptions" thus even though it was added to the exception list on the main user account, this other account was blocking access.

  Read the article

• How to Move SMS from iPhone to Mac?

  - by seda16

  SMS is the main form to Communicate with others, you would saved many messages on your iPhone. Well, there're many reasons you need to backup your iPhone sms to the Mac. For example, your family or friends have sent you some important and you want to save them on your iPhone in case you delete them by accident, or you just need to backup your sms for other use. So today let's talk about how to move sms from iPhone to Mac. It would be very easy if you use an app to help you, I always use the iPhone to Mac transfer on Amacsoft to copy sms from iPhone to Mac. Now let me tell you how to use this great app: Step 1:Connect iPhone to Mac First of all, you need to install and launch the iPhone to Mac transfer, then connect your iPhone to Mac. The iPhone to Mac transfer would recognise your iPhone automatically. And all information of your iPhone will be shown on an interface. Step 2:Select sms and Start the Export Now you can see many choice on the left, find "SMS" and click it, all sms on your iPhone will be listed on the right. Select and check those you want to move, then just click "Export" on the top to start the transfer. Wait just a few a minute the transfer will be done. Great! You have finish the transfer now, it's really very easy, right? I believe it won't be a problem if you want to transfer your sms from iPhone to Mac. By the way you can also use this Amacsoft iPhone to Mac transfer to move other kind of files , like photos, songs etc. If you're a windows user, you can use iPhone to PC transfer on this web to move sms from iPhone to your PC just with the same steps, good luck!

  Read the article

• tomcat 5.5 startup script on Ubuntu server

  - by Registered User

  Can any one share their Tomcat startup script I am looking for a tomcat start up script on a Ubuntu machine. My Ubuntu is 10.04 server. The tomcat is 5.5.30. It is in /opt/apache-tomcat-5.5.31 I tried a script #!/bin/bash # # tomcat # # chkconfig: # description: Start up the Tomcat servlet engine. # Source function library. . /lib/lsb/init-functions RETVAL=$? CATALINA_HOME="/opt/apache-tomcat-5.5.31" case "$1" in start) if [ -f $CATALINA_HOME/bin/startup.sh ]; then echo $"Starting Tomcat" /opt/apache-tomcat-5.5.31/bin/startup.sh fi ;; stop) if [ -f $CATALINA_HOME/bin/shutdown.sh ]; then echo $"Stopping Tomcat" /opt/apache-tomcat-5.5.31/bin/shutdown.sh fi ;; *) echo $"Usage: $0 {start|stop}" exit 1 ;; esac exit $RETVAL but it did not worked after a reboot. But the same script works if I do /etc/init.d/tomcat start or /etc/init.d/tomcat stop I have done update-rc.d tomcat defaults as it is a Ubuntu server but on reboot all of this fails to work.

  Read the article

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

  Read the article

• USB Wifi will not connect on Windows 7 (Even though the driver installs OK)

  - by Pete Roberts

  Windows 7 will not connect to a WiFi Netowrk using a USB Network Adapter. I have 3 adapters, A Senoa SUB 364 (EXT), a Repeatit SU2410 USB V2 and a ZYXEL G202. All of these devices install OK on Windows 7 Home Premium on my Destop PC (64 bit) and on my Asus Wii Netbook (32 bit). In each case the adapter can be enabled/disabled and the driver properties says it is working correctly. When I try and connect to a network Windows 7 behaves as though the adapter does not exist and reports no networks. The Wii has an integrated adapter which works perfectly under Windows and connects to either of the 3 networks available to me. I have done all the checks I can on the configuration. What seems odd to me is that it happens to all 3 devices on 2 different windows 7 PCs both of which are working perfectly in any other respect. This suggests the common denominator is me and I must be doing something wrong.. what's also strange is that I cannot find any similar problems being reported on any of the forums. From what reading I've been able to do it seems like the new wifi virtualisation thingy in W7 is not recognising the adapters which suggests I', missing a configuration option somewhere. Looking forward to finding out if I'm not alone or just being stupid. Pete

  Read the article

• My hard drive seems to be overheating... what should I do?

  - by George Edison

  After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

  Read the article

• Htpc aka "Media Center": cheap and *silent*?

  - by Unknown

  It may be me, or the place I live (Italy), but it seems pretty hard to get a build or a prebuilt nettop or a laptop that fits the need. I need something silent able to playback all h.264 fullhd content without stuttering, and well (and not loosing the hw acceleration because of softsubs...) silent not ugly silent and (possibly) cheap. I'm going the linux route, therefore i'm moving towards a cpu-based or nvida-integrated solution (i don't think ati hw accelerated playback - or the intel "hd" acceleration - is useable yet). Ion nettop; it's either the Acer Revo (but here it's incredibly pricey and it's hard to find the dualcore version) or the Asrock Ion 330, that in the current version is rated "silent" at 26Db. 26. Sounds pretty noisy to me!!! the previous version was even worse. was this product really aimed at htpc market?? the Dell Zino - i think it's ATI based unfortunately. Laptop: correct me if I'm wrong: sub 600€/$ units are quite loud under full load (because of the tiny fans). ULW laptops are indeed quite similar: tiniest fans = high pitched noise and the cpu still lacks power for non hd-accelerated video decoding Handmade build: little money can be saved with underpowered cpus, a low-midrange cpu would help in the case of non-hw-accelerated content the cases are quite pricey the PSU one has to get ranges between 100/150 €/$ minimum to keep the noise down a low-mid build, all included, sums up to over 650 €/$ for a still-looking-ugly-unit, without the blu-ray drive. Please help. What do you advise on this? ;) Am I ignoring laptops too much, maybe? Are low-priced Acers that noisy/high pitched under full load?

  Read the article

• D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

  - by axk

  I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

  Read the article

• DHCP forwarding behind access list on a Cisco Catalyst

  - by Ásgeir Bjarnason

  I'm having some trouble with forwarding DHCP from a subnet behind an access list on a Cisco Catalyst 4500 switch. I'm hoping somebody can see the mistake I'm making. The subnet is defined like this: (first three octets of IP addresses and vrf name anonymized) interface Vlan40 ip vrf forwarding vrf_name ip address 10.10.10.126 255.255.255.0 secondary ip address 10.10.10.254 255.255.255.0 ip access-group 100 out ip helper-address 10.10.20.36 no ip redirects I tried turning on a VMWare machine on this subnet that was configured to use DHCP, but I never got a DHCP response and the DHCP server didn't receive a request. I tried putting the following in the access-list: access-list 100 permit udp host 10.10.10.254 host 10.10.20.36 eq bootps access-list 100 permit udp host 10.10.10.254 host 10.10.20.36 eq bootpc access-list 100 permit udp host 10.10.20.36 host 10.10.10.254 eq bootps access-list 100 permit udp host 10.10.20.36 host 10.10.10.254 eq bootpc That didn't help. Can anybody see what the problem is? I know that the DHCP server works; our whole network is running off of this DHCP server I also know that the subnet works because we have active servers running on the network The DHCP scope is already defined on the DHCP server The subnet is correctly defined on the VMWare server (already servers running on the subnet on VMWare) Edit 2012-10-19: This is solved! The subnet had formerly been defined as a /25 network, but was then expanded into a /24 network. When the DHCP scope was altered after this change it was done incorrectly; the gateway was moved to .254, the leasable IP range was in the lower half of the /24 subnet but we forgot to change the CIDR prefix from /25 into /24. This happened some 2 years ago, and we didn't need to use DHCP on this server network again until this week. Thank you MDMarra and Jason Seemann for looking at the question and trying to troubleshoot. Now I'm wondering if I should mark Jason's answer as the accepted answer (I am new to the Stack Exchange network, so I don't know the etiquette of what to do if I misstated the question like in this case).

  Read the article

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• VMware Workstation update stopped autofit guest working

  - by u8sand

  VMware one day offered an update (8.0.1 build-528992 my current version) from 8.0. I accepted it, because updates usually fix problems. However not in this case... Previously it worked very well. Now, it still "works" but the one glitch I'm getting makes it too hard to deal with. This screenshot will explain my problem: As you can see, my virtual PC is not resizing correctly. (This happens with any operating system), autofit guest just doesn't work - it only results in things like this happening. Thanks to the tools it becomes very hard to NOT autofit guest. I've tried uninstalling 8.0.1 completely and installing 8.0 again but with the same results. I don't really understand what the new update has done to VMware Workstation or to my virtual machines. I do believe this isn't VMware Workstation's direct fault but from VMware Tools, which would explain why going back to 8.0 didn't work since VMware tools has its own updates. How can I fix this? The host is running Windows 7 Ultimate 64-bit.

  Read the article

• How can I cache a Subversion password on a server, without storing it in unencrypted form?

  - by Zilk

  My Subversion server only provides access via HTTPS; support for svn+ssh has been dropped because we wanted to avoid creating system users on that machine just for SVN access. Now I'm trying to provide a way for users to cache their passwords for a while, without leaving them stored on the filesystem in unencrypted form. This is no problem for Gnome or KDE users, because they can use gnome-keyring and kwallet, respectively. IIRC, TortoiseSVN has a similar caching mechanism, too. But what about users on a non-GUI system? Some context: in this case, we have a development/testing server where one project has been checked out into the Apache htdocs directory. Development for this project is almost complete, and only minor text/layout changes are performed directly on this server. Nevertheless, the changes should be checked into the repository. There's no kwallet and no gnome-keyring on this system, and the ssh-agent can't help because the repository is accessed via https instead of svn+ssh. As far as I know, that leaves them the choice of entering the password every time they talk to the SVN server, or storing it in an insecure way. Is there any way to get something like what gnome-keyring and kwallet provide in a non-GUI environment?

  Read the article

• Why is my RapidSSL Certificate chain is not trusted on ubuntu?

  - by olouv

  I have a website that works perfectly with Chrome & other browser but i get some errors with PHP in CLI mode so i'm investigating it, running this: openssl s_client -showcerts -verify 32 -connect dev.carlipa-online.com:443 Quite suprisingly my HTTPS appears untrusted with a Verify return code: 27 (certificate not trusted) Here is the raw output : verify depth is 32 CONNECTED(00000003) depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify error:num=20:unable to get local issuer certificate verify return:1 depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify error:num=27:certificate not trusted verify return:1 depth=1 C = US, O = "GeoTrust, Inc.", CN = RapidSSL CA verify return:1 depth=0 serialNumber = khKDXfnS0WtB8DgV0CAdsmWrXl-Ia9wZ, C = FR, O = *.carlipa-online.com, OU = GT44535187, OU = See www.rapidssl.com/resources/cps (c)12, OU = Domain Control Validated - RapidSSL(R), CN = *.carlipa-online.com verify return:1 So GeoTrust Global CA appears to be not trusted on the system (Ubuntu 11.10). Added Equifax_Secure_CA to try to solve this... But i get in this case Verify return code: 19 (self signed certificate in certificate chain) ! Raw output : verify depth is 32 CONNECTED(00000003) depth=3 C = US, O = Equifax, OU = Equifax Secure Certificate Authority verify error:num=19:self signed certificate in certificate chain verify return:1 depth=3 C = US, O = Equifax, OU = Equifax Secure Certificate Authority verify return:1 depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify return:1 depth=1 C = US, O = "GeoTrust, Inc.", CN = RapidSSL CA verify return:1 depth=0 serialNumber = khKDXfnS0WtB8DgV0CAdsmWrXl-Ia9wZ, C = FR, O = *.carlipa-online.com, OU = GT44535187, OU = See www.rapidssl.com/resources/cps (c)12, OU = Domain Control Validated - RapidSSL(R), CN = *.carlipa-online.com verify return:1 Edit Looks like my server does not trust/provide the Equifax Root CA, however i do correctly have the file in /usr/share/ca-certificates/mozilla/Equifax...

  Read the article

• Are these computer parts compatible?

  - by Jcubed

  so I'm building a computer and i want to know if all these parts are compatible. case: http://www.amazon.com/Xion-Gaming-Steel-Tower-Computer/dp/B002139YSS/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270923001&sr=8-1 power supply: http://www.amazon.com/Thermaltake-W0121RU-PurePower-Version-PCI-Express/dp/B0015MCMRG/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924656&sr=1-1 motherboard: http://www.amazon.com/GIGABYTE-GA-EP45-UD3P-LGA-Intel-Motherboard/dp/tech-data/B001HH2WE2/ref=de_a_smtd processor: http://www.amazon.com/Intel-Processor-1333MHz-LGA775-BX80570E8400/dp/B00116SLYY/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924524&sr=1-1 hard drive: http://www.amazon.com/Western-Digital-Caviar-Black-WD1001FALS/dp/B001C271MA/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924586&sr=8-1 DVD/Blu Ray Dive: http://www.amazon.com/LITE-Blu-ray-Internal-Optical-iHOS104/dp/tech-data/B002EE996Q/ref=de_a_smtd Graphics Card: http://www.amazon.com/Sapphire-Radeon-100252HDMI-PCI-Express-Graphics/dp/B001SJLLTQ/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924798&sr=1-1-spell Sound Card: http://www.amazon.com/Creative-Labs-SB0570L4-Blaster-Audigy/dp/B000LP0R3E/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924850&sr=1-1 Memory: http://www.amazon.com/Corsair-TWIN2X4096-8500C5DF-Dominator-PC2-8500-1066MHz/dp/B0014Z0Q04/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924896&sr=1-1-spell OS: Ubuntu 64-bit

  Read the article

• ASUS P8B WS - Endless Reboots

  - by tuxGurl

  I am running a Intel XEON 1245 with 4GBx2 Kingston Memory ECC Unbuffered DDR3 on an ASUS P8B WS motherboard. BIOS Version 0904 x64. This system is a little over a month old. It is running Ubuntu 11.10. This evening I found the machine turned off. When I tried to restart it, it would POST and stop at the GRUB screen. When I selected Ubuntu and hit enter within 2-3 seconds the would shutdown and restart. If I stayed at the GRUB screen and did nothing the system would not cut out. I tried booting off a USB stick and again 2-3 seconds after selecting 'Try Ubuntu without Installing' the machine will cut power and reboot. Things I have tried so far: Resetting the BIOS using the on board jumper Resetting the BIOS settings to default Disconnecting all external hardware - except keyboard & monitor Booting with 1 stick of RAM - I tried different single sticks Ensured that onboard EPU and GPU boost switches are in the off position. I am running a Memtest86 right now and it has been running for 38+ minutes. This is not an OS problem or an overheating issue (I have a CoolerMaster HAF Case with 3 fans besides the CPU fan) I am at a loss as to what to try next. I think the BIOS is mis-configured somehow but I don't know what to look for.

  Read the article

• General logging won't work in MySQL

  - by leonstr

  I saw on SF that there's an option in MySQL to log all queries. So, in my version (mysql-server-5.0.45-7.el5 on CentOS 5.2) this appears to be a case of enabling the 'log' option, so I edited /etc/my.cnf to add this: [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql old_passwords= log=/var/log/mysql-general.log [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I then created the file and set permissions: # touch /var/log/mysql-general.log # chown mysql. /var/log/mysql-general.log # ls -l /var/log/mysql-general.log -rw-r--r-- 1 mysql mysql 0 Jan 18 15:22 /var/log/mysql-general.log But when I start mysqld I get: 120118 15:24:18 mysqld started ^G/usr/libexec/mysqld: File '/var/log/mysql-general.log' not found (Errcode: 13) 120118 15:24:18 [ERROR] Could not use /var/log/mysql-general.log for logging (error 13). Turning logging off for the whole duration of the MySQL server process. To turn it on again: fix the cause, shutdown the MySQL server and restart it. 120118 15:24:18 InnoDB: Started; log sequence number 0 182917764 120118 15:24:18 [Note] /usr/libexec/mysqld: ready for connections. Can anyone suggest why this isn't working?

  Read the article

< Previous Page | 683 684 685 686 687 688 689 690 691 692 693 694  | Next Page >