Search Results

Search found 38274 results on 1531 pages for 'getting started'.

Page 688/1531 | < Previous Page | 684 685 686 687 688 689 690 691 692 693 694 695  | Next Page >

• Error starting Hyper-V VM

  - by Peter Bernier

  I'm trying to start a VM on a new Hyper-V installation and I'm receiving the following error: The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically. My machine supports virtualization at the hardware level and it is enabled in BIOS. Why am I receiving this error?

  Read the article

• Best way to make a shutdown hook?

  - by Binarus

  Since Ubuntu relies on upstart for some time now, I would like to use an upstart job to gracefully shutdown certain applications on system shutdown or reboot. It is essential that the system's shutdown or reboot is stalled until these applications are shut down. The applications will be started manually on occasion, and on system shutdown should automatically be ended by a script (which I already have). Since the applications can't be ended reliably without (nearly all) other services running, ending the applications has to be done before the rest of the shutdown begins. I think I can solve this by an upstart job which will be triggered on shutdown, but I am unsure which events I should use in which manner. So far, I have read the following (partly contradicting) statements: There is no general shutdown event in upstart Use a stanza like "start on starting shutdown" in the job definition Use a stanza like "start on runlevel [06S]" in the job definition Use a stanza like "start on starting runlevel [06S]" in the job definition Use a stanza like "start on stopping runlevel [!06S]" in the job definition From these recommendations, the following questions arise: Is there or is there not a general shutdown event in Ubuntu's upstart? What is the recommended way to implement a "shutdown hook"? When are the events runlevel [x] triggered; is this when having entered the runlevel or when entering the runlevel? Can we use something like "start on starting runlevel [x]" or "start on stopping runlevel [x]"? What would be the best solution for my problem? Thank you very much

  Read the article

• How do I delay email delivery using Entourage 2008 with Exchange, e.g. using the X.400 Deferred-Delivery header?

  - by Matt McClure

  I'd like to delay the delivery of email that I send so that I can time delivery when the recipient is unlikely to be reading email and I can reduce the likelihood of getting into a chat-like conversation. I'm using Entourage 2008 and Exchange hosted by Rackspace. I tried naively adding a Deferred-Delivery header after reading http://www.faqs.org/rfcs/rfc2156.html and www.itu.int/rec/T-REC-F.400-199906-I/en , but my mail was delivered immediately. Ideally the delay would occur on the MTA instead of my MUA so that delivery would still occur even if my laptop were disconnected from the network at the delivery time I specify. My best workaround at the moment is to habitually use Entourage's Send Later button when composing mail and then click Send/Receive at the end of the day. This is less than ideal because recipients are often reading mail at the end of my day, and I often get immediate replies. Matt

  Read the article

• Diablo 3 "freezes" periodically

  - by Shauna

  I'm running Diablo 3 (start edition, digital download) on the following: Ubuntu 12.04 64-bit (stock Unity, Gnome, etc; kernel version 3.2.0-29-generic) Wine version 1.5.11 (base, from Wine's PPA, game started with setarch i386 -3) Intel i7 920 CPU nVidia GTX260 with driver version 295.49 ("post-release updates" entry within the proprietary drivers tool), dual monitors 6GB RAM Every so often (and what appears to be at random), the game video will freeze up. I can still move the mouse, and it reacts to ctrl+alt+f2 to drop into text mode, but I can't get back to the desktop (which means I can check terminal to see what's going on after launching from terminal, especially since even in windowed mode, the secondary screen gets shut off by the game), and I can't continue to play the game. In order to get it running again, I have to restart lightdm, then relaunch the game (or, in a couple of rare cases, I had to restart the computer entirely, because running sudo service lightdmn [stop/start] doesn't appear to react). Turning down the video settings seems to have helped in some cases, but not all of them. Times it's frozen on me: The beginning of The Fallen Start quest part 6 - kill the Wretched Mother, right as you walk out of New Tristram and engage in the monsters on the northern path (repeatedly froze here until I adjusted the graphics down) Within the cinematic/event upon finding Deckard Cain While fighting the skeletons to protect Deckard Cain When about to enter Leoric's passage after Cain sends you back to where you found him That's as far as I've gotten through the game so far. Additionally, this doesn't happen on other games I play and seems to only occur with Diablo 3. Has anyone else run into this issue and know a possible cause or fix, or at least know where I can look (and what to look for) to figure out why this is happening?

  Read the article

• Ubuntu Software Centre Issue (unity 11.10) after broken sun-java6-jre package installation

  - by Stephen Myall

  I have been installing software packages from USC and I am getting the following error message. Worked fine one minute then the message below. Tried to search but couldn't find a solution Previously I was installing the sun-java6-jre package in terminal and had an connection outage and it didnt complete. I attempted an apt-get -f install with no success. i dont know what to try next. I'm relatively new to Linux. The answer provided with a similar question on this site didnt resolve the issue for meClick on this link An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Details File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1092, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 235, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate a file for the sun-java6-jre package. This might mean you need to manually fix this package. Terminal Output Link http://dl.dropbox.com/u/48466855/Terminal%20output.odt

  Read the article

• Godaddy vs. Route53 for DNS

  - by tim peterson

  I have my website set up as an EC2 instance and my DNS is currently Godaddy. I'm considering switching to Amazon AWS Route53 for DNS. The one thing I noticed however is that Route53 charges monthly fees but I never get any bills from Godaddy. Obviously, nobody likes getting charged for something they can get for free. If Godaddy is cheaper, can anyone confirm that the page load speed of an EC2 instance is actually better via Route53 vs. Godaddy? If it is not faster or cheaper, can someone point out other reasons it might make sense to do this switch? thanks, tim

  Read the article

• Challenge Accepted

  - by Chris Gardner

  Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2014/05/20/challenge-accepted.aspxIt appears my good buddies in The Krewe have created The Krewe Summer Blogging Challenge. The challenge is to write at least two blog posts a week for 12 weeks over the summer. Consider this challenge accepted. So, what can we expect coming up? I still have the Kinect v2 Alpha kit. Some of you may have seen me use it in talks. I need to make some major API changes in The Krewe WP8 App. Plus, I may have Xamarin on board to help with getting the app to the other platforms. I am determined to learn F#, and I'm taking all of you with me. I am teaching a college course this summer. I want to post some commentary on that side of training. I am sure some biometric stuff will come up. Anything else you guys may want. I have created tasks on my schedule to get a new blog post up no later than every Tuesday and Friday. We'll see how that goes. Wish me luck.

  Read the article

• Subversion error: (405 Method Not Allowed) in response to MKCOL

  - by Sergio del Amo

  I am getting the next error while trying to commit a new directory addition. svn: Commit failed (details follow): svn: Server sent unexpected return value (405 Method Not Allowed) in response to MKCOL request for '.... I have never seen this error before. Can someone help me? Solution I managed to solve the problem: Delete the parent's directory of the folder giving the problem. Did SVN Update A folder with the same name as the new one already existed in repository. Delete this folder SVN Commit Copy the new folder, Schedule for addition and SVN Commit

  Read the article

• MySQL open files limit

  - by Brian

  This question is similar to set open_files_limit, but there was no good answer. I need to increase my table_open_cache, but first I need to increase the open_files_limit. I set the option in /etc/mysql/my.cnf: open-files-limit = 8192 This worked fine in my previous install (Ubuntu 8.04), but now in Ubuntu 10.04, when I start the server up, open_files_limit is reported to be 1710. That seems like a pretty random number for the limit to be clipped to. Anyway, I tried getting around it by adding a line like this in /etc/security/limits.conf: mysql hard nofile 8192 I also tried adding this to the pre-start script in mysql's upstart config (/etc/init/mysql.conf): ulimit -n 8192 Obviously neither of those things worked. So where is the hoop that has been added between Ubuntu 8.04 and 10.04 through which I must jump in order to actually increase the open files limit?

  Read the article

• Cannot start `Routing and Remote Access Service` and it's dependencies

  - by ahmadali shafiee

  I tried to start Routing and Remote Access Service but I've got an error says the dependency service or group failed to start then I tried to start Remote Access Connection Manager (one of RRAS's dependencies) and the error way same. then I tried to start The Secure Socket Tuning Protocol Service but there was an error says that the the service started then stopped! the errors form event log is here: The Remote Access Connection Manager service depends on the Secure Socket Tunneling Protocol Service service which failed to start because of the following error: The operation completed successfully. The Secure Socket Tunneling Protocol Service service entered the stopped state. The Routing and Remote Access service depends on the Remote Access Connection Manager service which failed to start because of the following error: The dependency service or group failed to start. sort by date Does anyone know how can I resolve the problem?

  Read the article

• Bug fix for Eclipse runtime plugin

  - by Peter Benedikovic

  This blog is intended to inform about bug fix that solves this issue. Before continuing further, one important note – the linux and mac users do not need to read further because this bug appears only on Windows.  The problem was that the runtime plugin registered new runtime and server each time the Eclipse started. Users ended up with server view looking like this: I have created new runtime plugin which is now available at the update site http://download.java.net/glassfish/eclipse/indigo (or the same ending with juno for Juno users). You will still need to unistall the buggy plugin and (optionally but recommended) to remove runtimes created by this plugin. Here is the guide how to install bugfix: Uninstall buggy runtime plugin via menu Help->About Eclipse->Installation details. Remove runtimes created by old plugin – via Window->Preferences->Server->Runtime Environment. After pressing remove button you may be asked if you want to remove also the servers based on runtime being removed. Recommended is to do so. Now you can install new runtime plugin. Go to Help->Install New Software. You may ask why I haven‘t provided the update for buggy runtime which could be installed via Check for updates feature of Eclipse. It has two main reasons: The bug fix is needed only for Windows users so I didn't want to bother other users by updating working plugin. The runtime plugin has had structure that was not quite suitable for Eclipse update. This structure is now changed so future bugs (I am sure that there will be no such ;)) can be fixed by standard update. Have a good one!

  Read the article

• Tmux causes Emacs glitch

  - by killy9999

  Recently I started using Tmux, but I noticed that it causes a strange Emacs glitch. When I open source code for elisp or haskell, the comments aren't highlighted. Only the comment sign is (; in case of elisp, -- in case of haskell). The rest of the commented line is in normal colour. When I run Emacs outside of Tmux everything works as expected - the whole commented line is highlighted in a colour denoting a comment. Any ideas why this is happening? SOLUTION: Based on Stefan's comment I added this to my .emacs file: (custom-set-variables (custom-set-faces '(font-lock-comment-face ((((class color) (min-colors 8) (background dark)) (:foreground "red")))))) Now the comments are displayed in red, just like comment delimiters.

  Read the article

• apt-get update very slow, stuck at "Waiting for headers"

  - by Liam

  I have looked at similar questions: Stuck at 0% [waiting for headers] (apt) apt-get update stuck on "Waiting for Headers" However neither one of them answer my problem. I am running 12.04 AMD64 and have recently started getting an issue that when I update my repos from my connection at home through a terminal, using sudo apt-get update, it takes forever (literally after 2 hours it was at 28%), however when I run from a different location it takes less than 5 minutes to complete. I have attempted changing which mirror I use but that does not solve the issue. I have also cut down what is in my sources list but this also makes no difference. There are no faults on my ADSL line as I have already contacted my ISP to check this. It also makes no difference if I use a WiFi or network cable connection. What could be my issue? A speed test (www.speedtest.net) comes out at about 0.9 Mbps down and 0.42 Mbps up (which is a shade under the advertised line speed), I reside in South Africa and use the UCT LEG server. But I have also tried the other mirrors available in SA....none of them make a difference.

  Read the article

• Audio services in windows 7

  - by infant programmer 'Aravind'

  In an attempt of blocking a viral service on my system (which was restarting my system automatically for every 30 seconds), I disabled all the services, and later enabled trustworthy services only. (note: Hide all microsoft services didn't work blocking the auto restart so I disabled all services) Now I have been succeeded in blocking automatic restart and I am able to access internet and all other necessary stuffs. Well, however system audio is mute(definitely because a necessary service is not running). Now I need a list of services that need to be started (set automatic) on windows 7.

  Read the article

• Visage

  - by Geertjan

  Raj, the Chennai JUG lead, together with others from that JUG, is interested in Visage, the JavaFX script language closely associated with Stephen Chin. He sent me the related lexer and parser and I started by having a look at them in the new version of ANTLRWorks being developed by Sam Harwell (who demonstrated it very effectively during JavaOne): Notice how the lexer and parser are shown in a tree structure, as well as in a cool syntax diagram. Next, I downloaded a bunch of JARs from here, so that packages such as from "com.sun.tools.mjavac" can be used, i.e., these are Visage-specific packages that aren't found anywhere except in the location below: http://code.google.com/p/visage/wiki/GettingStarted It turns out that there's also a Visage NetBeans plugin out there: http://code.google.com/p/visage/source/browse/?repo=netbeans-plugin Rather than recreating everything from scratch, i.e., generating ANTLR Java classes from the lexer and parser, I copied a lot of stuff from the site above and now a file Raj sent me looks as follows, i.e., basic syntax coloring is shown: For anyone wanting to seriously support Visage in NetBeans IDE, I recommend downloading the existing Visage NetBeans plugin above, rather than creating everything yourself from scratch, and then figuring out how to use that code in some way, i.e., add the JARs I pointed to above, and work on its build.xml file, which could be frustrating in the beginning, but there's no point in recreating everything if everything already exists.

  Read the article

• Creating user UI using Flixel

  - by Jamie Read

  I am new to game development but familiar with programming languages. I have started using Flixel and have a working Breakout game with score and lives. What I am trying to do is add a Start Screen before actually loading the game. I have a create function that adds all the game elements to the stage: override public function create():void // all game elements { How can I add this pre-load Start Screen? I'm not sure if I have to add in the code to this create function or somewhere else and what code to actually add. Eventually I would also like to add saving, loading, options and upgrades too. So any advice with that would be great. Here is my main game.as: package { import org.flixel.*; public class Game extends FlxGame { private const resolution:FlxPoint = new FlxPoint(640, 480); private const zoom:uint = 2; private const fps:uint = 60; public function Game() { super(resolution.x / zoom, resolution.y / zoom, PlayState, zoom); FlxG.flashFramerate = fps; } } } Thanks.

  Read the article

• Newly installed Ubuntu 12.10 and weird graphics

  - by Benji Marshall

  My machine: 2 GB RAM Intel Pentium Dual core E2180 @ 2 GHz NVIDIA GeForce 6200 LE My friend had recommended Ubuntu to me and I thought I might as well get used to Linux in anticipation for my Raspberry Pi. He said that Wubi was the easiest way to install and I installed it using Wubi. On my first ever boot up of Ubuntu from the Windows Bootloader started normally, and I logged on in a normal fashion, and my desktop loaded normally. I then pressed the Windows key/Power key and everything went wrong. Random lines of yellow and blue appeared on my screen, and changed location when I moved my mouse. The lines stayed for a few seconds and then partially went to I could sort of use my computer. I tried moving my mouse and the entire desktop looked like it broke apart, fragments of it just scatter across my screen at random angles. I could move my mouse and the pointer would move but clicking did nothing. I had to turn off my machine by removing the plug. I would love to get off Windows, but at least the doesn't completely mess up the graphics, and is relatively usable. Please help me solve this....

  Read the article

• How do I draw a point sprite using OpenGL ES on Android?

  - by nbolton

  Edit: I'm using the GL enum, which is incorrect since it's not part of OpenGL ES (see my answer). I should have used GL10, GL11 or GL20 instead. Here's a few snippets of what I have so far... void create() { renderer = new ImmediateModeRenderer(); tiles = Gdx.graphics.newTexture( Gdx.files.getFileHandle("res/tiles2.png", FileType.Internal), TextureFilter.MipMap, TextureFilter.Linear, TextureWrap.ClampToEdge, TextureWrap.ClampToEdge); } void render() { Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); Gdx.gl.glClearColor(0.6f, 0.7f, 0.9f, 1); } void renderSprite() { int handle = tiles.getTextureObjectHandle(); Gdx.gl.glBindTexture(GL.GL_TEXTURE_2D, handle); Gdx.gl.glEnable(GL.GL_POINT_SPRITE); Gdx.gl11.glTexEnvi(GL.GL_POINT_SPRITE, GL.GL_COORD_REPLACE, GL.GL_TRUE); renderer.begin(GL.GL_POINTS); renderer.vertex(pos.x, pos.y, pos.z); renderer.end(); } create() is called once when the program starts, and renderSprites() is called for each sprite (so, pos is unique to each sprite) where the sprites are arranged in a sort-of 3D cube. Unfortunately though, this just renders a few white dots... I suppose that the texture isn't being bound which is why I'm getting white dots. Also, when I draw my sprites on anything other than 0 z-axis, they do not appear -- I read that I need to crease my zfar and znear, but I have no idea how to do this using libgdx (perhaps it's because I'm using ortho projection? What do I use instead?). I know that the texture is usable, since I was able to render it using a SpriteBatch, but I guess I'm not using it properly with OpenGL.

  Read the article

• I need advice on laptop purchase for university [closed]

  - by Systemic33

  I'm currently in University studying Computer Science/IT/Information Technology. And this first year i've managed to do with the laptop I had; an ASUS Eee PC 1000H with a 10.1" screen. But this is getting way too underpowered and small for programming more than just quick programming introduction excercises. So I'm looking to buy a more suitable laptop. It's not supposed to be a desktop replacement though, since I've got a pretty good desktop already with a 24" monitor. So the kinda laptop I want to buy is one suited for university. If this bears any significance, I'm working in Java atm, but I will likely work with lots of other things incl. web development. I'm looking to spend about $1700 plus/minus. And it should be powerful/big enough for working on programming projects as well as the usual university stuff like MATLAB, Maple, etc out "in the field", and sometimes for maybe a week when visiting my parents. What I'm looking at right now is the ASUS Zenbook UX31A with the 1920 x 1080 resolution on 13.3" IPS display. But I'm kinda nervous that this will be too petite for programming. In essence i'm looking for a powerfull computer, that has good enough battery, and looks good. I would love suggestions or any type of feedback, either with maybe a better choice, or input on how its like programming on 13" laptops. Very much thanks in advance for anyone who even went through all that! PS. I don't want a mac, or my inner karma would commit Seppuku xD But experiences from working on the 13" Macbook Air would kinda be equivalent to the Zenbook i'm considering, so I would love to hear that. tl;dr The quick brown fox jumps over the lazy dog ;)

  Read the article

• How to configure remote access to multiple subnets behind a SonicWALL NSA 2400

  - by Kyle Noland

  I have a client that uses a SonicWALL NSA 2400 as their firewall. I need to setup a second LAN subnet for a handful of PC. Management has decided that there should be a second subnet even though intend to allow access across the two subnets - I know... I'm having trouble getting communication across the 2 subnets. I can ping each gateway, but I cannot ping or seem to route traffic fron subnet A to subnet B. Here is my current setup: X0 Interface: LAN zone with IP addres 192.168.1.1 X1 Interface: WAN zone with WAN IP address X2 Interface: LAN zone with IP address 192.168.75.1 I have configured ARP and routes for the secondar subnet (X2) according to this SonicWALL KB article: http://www.sonicwall.com/downloads/supporting_multiple_firewalled_subnets_on_sonicos_enhanced.pdf using "Example 1". At this point I don't minding if I have to throw the SonicWALL GVC software VPN client into the mix to make it work. It feel like I have an Access Rule issue, but for testing I made LAN LAN, WAN LAN and VPN LAN rules wide open with the same results.

  Read the article

• Dual boot Win 7 Ubuntu - home and boot partitions have no mount point

  - by cwmff

  After installing Ubuntu 12.04.3 on a Windows 7 laptop, running Ubuntu Disk Utility showed the following partition information; /dev/sda1 NTFS, Bootable, Filesystem, Labled: System Reserved, 105MB, Not Mounted /dev/sda2 NTFS, no flag, Filesystem, no label, 84GB, Not Mounted /dev/sda3 Usage: Container for logical partitions. Partition Type: Extended (0x05). no flags. no label. Capacity: 416GB /dev/sda5 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 999MB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda8 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 30GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Mounted at / /dev/sda6 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 377GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda7 Usage: Swap Space. Partition Type: Linux (0x82). no partition label. no flags. Capacity: 8.4GB. sda2 contains Windows 7 but without a mount point sda6 should have been the Home partition and sda5 should have been the Boot partition but the mount points seem to have been lost and now everything but Swap has gone into the root partition sda8 (the Home folder also seems to be within sda8). How do I go about getting sda6 used as the Home partition and sda5 as Boot

  Read the article

• Issue with percona-xtrabackup-2.0.0 hotbackup on MyIsam tables

  - by arn

  I am trying to implement hot backup for MyIsam tables with "percona-xtrabackup-2.0.0" and getting the following error? As the all tables are MyIsam I doubt am I using the correct package ? Backup : ./innobackupex --user="root" --password=<pass> --defaults-file="<path>/my.cnf" --ibbackup="<path>/percona-xtrabackup-2.0.0/bin/xtrabackup" <path>/backup/ innobackupex: fatal error: no 'mysqld' group in MySQL options innobackupex: fatal error: OR no 'datadir' option in group 'mysqld' in MySQL options apply-log : ./innobackupex-1.5.1 --apply-log --defaults-file=<path>/backup/2012-06-02_09-59-30/backup-my.cnf --ibbackup=<path>/percona-xtrabackup-2.0.0/bin/xtrabackup <path>/backup/2012-06-02_09-59-30/

  Read the article

• Clear edged sprite

  - by Ananth

  I am a newbie to cocos2d. I would like make user to draw similar to what a painting brush would do. I am using CCSprite for that. I almost implemented the velocity, color and opacity factors for that tool, but I couldn't get the Sprite to be as clear as it should be. I can draw only in the below image http://i.imgur.com/KBe0L.png which has blunt edges. But I want it to be harder / clear outside edges as in http://i.stack.imgur.com/GrFlv.png. I am getting no idea to make it clear edged. The piece of code Im using is glEnable(GL_BLEND); [brush.texture setAliasTexParameters]; [brush setBlendFunc:(ccBlendFunc){GL_ONE, GL_ONE_MINUS_SRC_ALPHA}]; [brush visit]; I suspect the problem would be on blending mode. I tried some blending modes, but with no expected results. I am trying this for the past five days and so confused. Can some one help me sort this out? Thanks in advance.

  Read the article

• Ubuntu...I love you, I hate you

  - by gregarobinson

   I have been working on seeing if a .NET 3.5 application will port over to Linux, Ubuntu to be specific. I started with version 9.01, then 9.10 and now 10.04 as I find more and more that I need from Mono. I have a dual boot on a dev box, Windows 7 and Ubuntu. An upgrade from Ubuntu 9.01 to 9.10 caused my mouse and keyboard to lock up. I was able to boot from a 9.10 cd. Then, I upgraded to 10.04 as I needed Mono 2,2. Upgrade worked, lost my windows boot though. it seems grub somehow jumped in and messed up the windows boot. After Googlign liek crazy and trying this and that, these 2 links finally got me my windows boot back:http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:Boot_Sector http://support.microsoft.com/kb/927392So, I am now thinking about trying SuSe instead as I hear\read it's more stable. I think a lot of my pains have been related to learning and getting use to Linux.        

  Read the article

• Determine logged on user on Windows computer from Linux

  - by Justin

  How can I determine who is logged on to a remote Windows XP computer from Linux? I do not have administrator access on the domain or on the remote computer. I can do it from a separate Windows computer using PsLoggedOn -L \\computer from PsTools I've tried using nmblookup -A remotecomputer, but I only see entries for the computer and the domain, not a <03> entry for the user. I've also tried running PsLoggedOn under wine; I get an error: Connecting to Registry of \\computer.company.com... fixme:reg:RegConnectRegistryW Connect to L"computer.company.com" is not supported. I started looking into winexe, but it looks like I would need administrative rights on the remote computer to get it working.

  Read the article

< Previous Page | 684 685 686 687 688 689 690 691 692 693 694 695  | Next Page >