Search Results

Search found 54131 results on 2166 pages for 'database project'.

Page 691/2166 | < Previous Page | 687 688 689 690 691 692 693 694 695 696 697 698  | Next Page >

• hibernate c3p0 broken pipe

  - by raven_arkadon

  Hi, I'm using hibernate 3 with c3p0 for a program which constantly extracts data from some source and writes it to a database. Now the problem is, that the database might become unavailable for some reasons (in the simplest case: i simply shut it down). If anything is about to be written to the database there should not be any exception - the query should wait for all eternity until the database becomes available again. If I'm not mistaken this is one of the things the connection pool could do for me: if there is a problem with the db, just retry to connect - in the worst case for infinity. But instead i get a broken pipe exception, sometimes followed by connection refused and then the exception is passed to my own code, which shouldn't happen. Even if I catch the exception, how could i cleanly reinitialize hibernate again? (So far without c3p0 i simply built the session factory again, but i wouldn't be surprised if that could leak connections (or is it ok to do so?)). The database is Virtuoso open source edition. My hibernate.xml.cfg c3p0 config: <property name="hibernate.connection.provider_class">org.hibernate.connection.C3P0ConnectionProvider</property> <property name="hibernate.c3p0.breakAfterAcquireFailure">false</property> <property name="hibernate.c3p0.acquireRetryAttempts">-1</property> <property name="hibernate.c3p0.acquireRetryDelay">30000</property> <property name="hibernate.c3p0.automaticTestTable">my_test_table</property> <property name="hibernate.c3p0.initialPoolSize">3</property> <property name="hibernate.c3p0.minPoolSize">3</property> <property name="hibernate.c3p0.maxPoolSize">10</property> btw: The test table is created and i get tons of debug output- so it seems it actually reads the config.

  Read the article

• Docs for auto-generated methods in Ruby on Rails

  - by macek

  Rails has all sorts of auto-generated methods that I've often times struggled to find documentation for. For example, in routes.rb, if I have: map.resources :projects do |p| p.resources :tasks end This will get a plethora of auto-generate path and url helpers. Where can I find documentation for how to work with these paths? I generally understand how to work with them, but more explicit docs might help me understand some of the magic that happens behind the scenes. # compare project_path(@project) project_task_path(@project, @task) # to project_path(:id => @project.id) project_task_path(:project_id => @project.id, :id => @task.id) Also, when I change an attribute on a model, @post.foo_changed? will be true. Where can I find documentation for this and all other magical methods that are created like this? If the magic is there, I'd love to take advantage of it. And finally: Is there a complete resource for config.___ statements for environment.rb? I was able to find docs for Configuration#gem but what attributes can I set within the stubs like config.active_record.___, config.action_mailer.___, config.action_controller.___, etc. Again, I'm looking for a complete resource here, not just a settings for the examples I provided. Even if you can only answer one of these questions, please chime in. These things seem to have been hiding from me and it's my goal to get them some more exposure, so I'll be upvoting all links to docs that point me to what I'm looking for. Thanks! ps, If they're not called auto-generated methods, I apologize. Someone can teach me a lesson here, too :) Edit I'm not looking for tutorials here, folks. I have a fair amount of experience with rails; I'm just looking for complete docs. E.g., I understand how routing works, I just want docs where I can read about all of the usage options.

  Read the article

• How to set RAILS_ENV variable when running Rails tests?

  - by Jason

  In both my environment.rb and test_helper.rb files I have: ENV["RAILS_ENV"] = "development" I have one functional test written, however when I run it, the script tries to connect to my database using the "test" configuration settings which are in the database.ymal file & won't connect the the database. How can I run my tests using the "development" environment settings?

  Read the article

• PHP mysqli error return time

  - by Dori

  Hello. Can i ask a fundamental question. Why when I try to create a new mysqli object in php with invalid database infomation (say an incorrect database name) does it not return an error intstantly? I usually program server stuff in Java and something like this would throw back an error strait away, not after 20 seconds or so. For example $conn = new mysqli($host, $username, $password, $database); Thanks!

  Read the article

• How to bundle extension methods requiring configuration in a library

  - by Greg

  Hi, I would like to develop a library that I can re-use to add various methods involved in navigating/searching through a graph (nodes/relationships, or if you like vertexs/edges). The generic requirements would be: There are existing classes in the main project that already implement the equivalent of the graph class (which contains the lists of nodes / relationships), node class and relationship class (which links nodes together) - the main project likely already has persistence mechanisms for the info (e.g. these classes might be built using Entity Framework for persistance) Methods would need to be added to each of these 3 classes: (a) graph class - methods like "search all nodes", (b) node class - methods such as "find all children to depth i", c) relationship class - methods like "return relationship type", "get parent node", "get child node". I assume there would be a need to inform the library with the extending methods the class names for the graph/node/relationships table (as different project might use different names). To some extent it would need to be like how a generics collection works (where you pass the classes to the collection so it knows what they are). Need to be a way to inform the library of which node property to use for equality checks perhaps (e.g. if it were a graph of webpages the equality field to use might be the URI path) I'm assuming that using abstract base classes wouldn't really work as this would tie usage down to have to use the same persistence approach, and same class names etc. Whereas really I want to be able to, for a project that has "graph-like" characteristics, the ability to add graph searching/walking methods to it.

  Read the article

• Socket error in python

  - by Alice Everett

  I am using python-monetdb 11.16.0.7. I created my database farm and database according to instructions given below (source: http://www.monetdb.org/Documentation/monetdbd) % monetdbd start /home/my-dbfarm % monetdb create my-first-db Then I tried to connect to the database using the below mentioned command in python(https://pypi.python.org/pypi/python-monetdb/). Upon doing so I am getting the below mentioned error: >import monetdb.sql >connection=monetdb.sql.connect(username="monetdb",password="monetdb",hostname="localhost",database="my-first-db"); File "/usr/local/lib/python2.7/dist-packages/monetdb/sql/__init__.py", line 28, in connect return Connection(*args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/monetdb/sql/connections.py", line 58, in __init__ unix_socket=unix_socket) File "/usr/local/lib/python2.7/dist-packages/monetdb/mapi.py", line 93, in connect self.socket.connect((hostname, port)) File "/usr/lib/python2.7/socket.py", line 224, in meth return getattr(self._sock,name)(*args) socket.error: [Errno 111] Connection refused Can someone please help me with this?

  Read the article

• Updating Data through Objects

  - by Chacha102

  So, lets say I have a record: $record = new Record(); and lets say I assign some data to that record: $record->setName("SomeBobJoePerson"); How do I get that into the database. Do I..... A) Have the module do it. class Record{ public function __construct(DatabaseConnection $database) { $this->database = $database; } public function setName($name) { $this->database->query("query stuff here"); $this->name = $name; } } B) Run through the modules at the end of the script class Record{ private $changed = false; public function __construct(array $data=array()) { $this->data = $data; } public function setName($name) { $this->data['name'] = $name; $this->changed = true; } public function isChanged() { return $this->changed; } public function toArray() { return $this->array; } } class Updater { public function update(array $records) { foreach($records as $record) { if($record->isChanged()) { $this->updateRecord($record->toArray()); } } } public function updateRecord(){ // updates stuff } }

  Read the article

• Using StructureMap to create classes by a name?

  - by Bevan

  How can I use StructureMap to resolve to an appropriate implementation of an interface based on a name stored in an attribute? In my project, I have many different kinds of widgets, each descending from IWidget, and each decorated with an attribute specifying the kind of associated element. To illustrate: [Configuration("header")] public class HeaderWidget : IWidget { } [Configuration("linegraph")] public class LineGraphWidget : IWidget { } When processing my (XML) configuration file, I want to obtain an instance of the appropriate concrete class based on the name of the element I'm processing. public IWidget CreateWidget(XElement definition) { var kind = definition.Name.LocalName; var widget = // What goes here? widget.Configure(definition); return widget; } Each definition should result in a different widget being created - I don't need or want the instances to be shared. In the past I've written plenty of code to do this kind of thing manually, including writing a custom "roll-your-own" IoC container for one project. However, one of my goals with this project is to become proficient with StructureMap instead of reinventing the wheel. I think I've already managed to set up automatic scanning of assemblies so that StructureMap knows about all my IWidget implementations: public class WidgetRegistration : Registry { public WidgetRegistration() { Scan( scanner => { scanner.AssembliesFromApplicationBaseDirectory(); scanner.AddAllTypesOf<IWidget>(); }); } } However, this isn't registering the names of my widgets with StructureMap. What do I need to add to make my scenario work? (While I am trying to use StructureMap in this project, an answer showing me how to solve this problem with a different DI/IoC tool would still be valuable.)

  Read the article

• How to get a list of MySQL views ?

  - by Annan

  I'm looking for a way to list all views in a database. Initially I found and tried an answer on the MySQL forums: SELECT table_name FROM information_schema.views WHERE information_schema.views.table_schema LIKE 'view%'; How ever this doesn't work, returning an empty set. (I know they're in there!) These also fail: mysql> use information_schema; Database changed mysql> select * from views; ERROR 1102 (42000): Incorrect database name 'mysql.bak' mysql> select * from tables; ERROR 1102 (42000): Incorrect database name 'mysql.bak' Why isn't this working?

  Read the article

• Entity Framework RC1 DbContext query issue

  - by Steve

  I'm trying to implement the repository pattern using entity framework code first rc 1. The problem I am running into is with creating the DbContext. I have an ioc container resolving the IRepository and it has a contextprovider which just news up a new DbContext with a connection string in a windsor.config file. With linq2sql this part was no problem but EF seems to be choking. I'll describe the problem below with an example. I've pulled out the code to simplify things a bit so that is why you don't see any repository pattern stuff here. just sorta what is happening without all the extra code and classes. using (var context = new PlssContext()) { var x = context.Set<User>(); var y = x.Where(u => u.UserName == LogOnModel.UserName).FirstOrDefault(); } using (var context2 = new DbContext(@"Data Source=.\SQLEXPRESS;Initial Catalog=PLSS.Models.PlssContext;Integrated Security=True;MultipleActiveResultSets=True")) { var x = context2.Set<User>(); var y = x.Where(u => u.UserName == LogOnModel.UserName).FirstOrDefault(); } PlssContext is where I am creating my DbContext class. The repository pattern doesn't know anything about PlssContext. The best I thought I could do was create a DbContext with the connection string to the sqlexpress database and query the data that way. The connection string in the var context2 was grabbed from the context after newing up the PlssContext object. So they are pointing at the same sqlexpress database. The first query works. The second query fails miserably with this error: The model backing the 'DbContext' context has changed since the database was created. Either manually delete/update the database, or call Database.SetInitializer with an IDatabaseInitializer instance. For example, the DropCreateDatabaseIfModelChanges strategy will automatically delete and recreate the database, and optionally seed it with new data. on this line var y = x.Where(u => u.UserName == LogOnModel.UserName).FirstOrDefault(); Here is my DbContext namespace PLSS.Models { public class PlssContext : DbContext { public DbSet<User> Users { get; set; } public DbSet<Corner> Corners { get; set; } public DbSet<Lookup_County> Lookup_County { get; set; } public DbSet<Lookup_Accuracy> Lookup_Accuracy { get; set; } public DbSet<Lookup_MonumentStatus> Lookup_MonumentStatus { get; set; } public DbSet<Lookup_CoordinateSystem> Lookup_CoordinateSystem { get; set; } public class Initializer : DropCreateDatabaseAlways<PlssContext> { protected override void Seed(PlssContext context) { I've tried all of the Initializer strategies with the same errors. I don't think the database is changing. If I remove the modelBuilder.Conventions.Remove<IncludeMetadataConvention>(); Then the error returns is The entity type User is not part of the model for the current context. Which sort of makes sense. But how do you bring this all together?

  Read the article

• Non-blocking MySQL updates with java?

  - by justkevin

  For a multiplayer game I'm working on I'd like to record events to the mysql database without blocking the game update thread so that if the database is busy or a table is locked the game doesn't stop running while it waits for a write. What's the best way to accomplish this? I'm using c3p0 to manage the database connection pool. My best idea so far is to add query update strings to a synchronized list with an independent thread checking the list every 100ms and executing the queries it finds there.

  Read the article

• Singleton EXC_BAD_ACCESS

  - by lclaud

  Hi, so I have a class that I decleare as a singleton and in that class I have a NSMutableArray that contains some NSDictionaries with some key/value pairs in them. The trouble is it doesn't work and I dont't know why... I mean it crashes with EXC_BAD_ACCESS but i don't know where. I followed the code and it did create a new array on first add, made it to the end of the funtion ..and crashed ... @interface dataBase : NSObject { NSMutableArray *inregistrari; } @property (nonatomic,retain) NSMutableArray *inregistrari; -(void)adaugaInregistrareCuData:(NSDate *)data siValoare:(NSNumber *)suma caVenit:(BOOL)venit cuDetaliu:(NSString *)detaliu; -(NSDictionary *)raportIntreData:(NSDate *)dataInitiala siData:(NSDate *)dataFinala; -(NSArray *)luniDisponibileIntreData:(NSDate *)dataInitiala siData:(NSDate *)dataFinala; -(NSArray *)aniDisponibiliIntreData:(NSDate *)dataInitiala siData:(NSDate *)dataFinala; -(NSArray *)vectorDateIntreData:(NSDate *)dataI siData:(NSDate *)dataF; -(void)salveazaInFisier; -(void)incarcaDinFisier; + (dataBase *)shareddataBase; @end And here is the .m file #import "dataBase.h" #import "SynthesizeSingleton.h" @implementation dataBase @synthesize inregistrari; SYNTHESIZE_SINGLETON_FOR_CLASS(dataBase); -(void)adaugaInregistrareCuData:(NSDate *)data siValoare:(NSNumber *)suma caVenit:(BOOL)venit cuDetaliu:(NSString *)detaliu{ NSNumber *v=[NSNumber numberWithBool:venit]; NSArray *input=[NSArray arrayWithObjects:data,suma,v,detaliu,nil]; NSArray *keys=[NSArray arrayWithObjects:@"data",@"suma",@"venit",@"detaliu",nil]; NSDictionary *inreg=[NSDictionary dictionaryWithObjects:input forKeys:keys]; if(inregistrari == nil) { inregistrari=[[NSMutableArray alloc ] initWithObjects:inreg,nil]; }else { [inregistrari addObject:inreg]; } [inreg release]; [input release]; [keys release]; } It made it to the end of that adaugaInregistrareCuData ... ok . said the array had one object ... and then crashed

  Read the article

• Local Data Cache - How do I refresh the local db when I add fields to remote db?

  - by Chu

  I'm using a Local Data Cache in an ASP.NET 3.5 environment. I made a change in my main database by adding a new field. I double click on my .SYNC file in my project to startup the Local Data Cache wizard again. The wizard starts and I click OK with the hopes that it'll re-query my database and add the new field to the local database file. Instead, I get an error saying "Synchronizing the databae failed with the message: Unable to enumerate changes at the DbServerSyncProvider..." The only way I know to get things working again is to delete the .SYNC file along with the local database and start it from scratch. There's got to be an easier way... anyone know it?

  Read the article

• Why doesn't my test run tearDownAfterTestClass when it fails

  - by Memor-X

  in a test i am writing the setUpBeforeTests creates a new customer in the database who is then used to perform the tests with so naturally when i finish the test i should get rid of this test customer in tearDownAfterTestClass so that i can create then anew when i rerun the test and not get any false positives how when the tests all run fine i have no problem but if a test fails and i go to rerun it my setUpBeforeTests fails because i check for mysql errors in it like this try { if(!mysqli_query($connection,$query)) { $this->assertTrue(false); } } catch (Exception $exc) { $msg = '[tearDownAfterTestClass] Exception Error' . PHP_EOL . PHP_EOL; $msg .= 'Could not run query - '.mysqli_error($connection). PHP_EOL;; $this->fail($msg); } the error i get is that there is a primary key violation which is expected cause i'm trying to create a new customer using the same data (primary key is on email which is also used to log in) however that means when the test failed it didn't run tearDownAfterTestClass now i could just move everything in tearDownAfterTestClass to the start of setUpBeforeTests however to me that seems like bad programming since it defeates the purpose of even have tearDownAfterTestClass so i am wondering, why isn't my tearDownAfterTestClass running when a test fails NOTE: the database is a fundamental part of the system i'm testing and the database and system are on a separate development environment not the live one, the backup files for the database are almost 2 GBs and takes almost 1/2 an hour to restore, the purpose of the tear down is to remove any data we have added because of the test so that we don't have to restore the database every time we run the tests

  Read the article

• Automatic logout in python web app

  - by Ali

  I have a web application in python wherein the user submits their email and password. These values are compared to values stored in a mysql database. If successful, the script generates a session id, stores it next to the email in the database and sets a cookie with the session id, with allows the user to interact with other parts of the sight. When the user clicks logout, the script erases the session id from the database and deletes the cookie. The cookie expires after 5 hours. My concern is that if the user doesnt log out, and the cookie expires, the script will force him to login, but if he has copied the session id from before, it can still be validated. How do i automatically delete the session id from the mysql database after 5 hours?

  Read the article

• Stroage of events in Calendar application in android 2.1

  - by Navin

  Does the calendar application in android maintains a cache of its database?? Whenever i edit and mark some events via tha calendar app it is stored in the database but if i edit the calendar.db from some outside source the changes made are not reflected in the calendar app. so my question is does the calendar app maintains a cache or some other form of database?? if yes then where and how??

  Read the article

• Strategy for locale sensitive sort with pagination

  - by Thom Birkeland

  Hi, I work on an application that is deployed on the web. Part of the app is search functions where the result is presented in a sorted list. The application targets users in several countries using different locales (= sorting rules). I need to find a solution for sorting correctly for all users. I currently sort with ORDER BY in my SQL query, so the sorting is done according to the locale (or LC_LOCATE) set for the database. These rules are incorrect for those users with a locale different than the one set for the database. Also, to further complicate the issue, I use pagination in the application, so when I query the database I ask for rows 1 - 15, 16 - 30, etc. depending on the page I need. However, since the sorting is wrong, each page contains entries that are incorrectly sorted. In a worst case scenario, the entire result set for a given page could be out of order, depending on the locale/sorting rules of the current user. If I were to sort in (server side) code, I need to retrieve all rows from the database and then sort. This results in a tremendous performance hit given the amount of data. Thus I would like to avoid this. Does anyone have a strategy (or even technical solution) for attacking this problem that will result in correctly sorted lists without having to take the performance hit of loading all data? Tech details: The database is PostgreSQL 8.3, the application an EJB3 app using EJB QL for data query, running on JBoss 4.5.

  Read the article

• Refreshing WEB-INF/lib in Google App Engine (with Eclipse)

  - by Adrian Petrescu

  Hi, I've created a new Google App Engine project within Eclipse. I copied several JARs that I need for my application into the WEB-INF/lib directory, and add them to the build path. I make some random calls to these JARs from within the handler, deploy, and everything works fine. However, if I then change one of the JARs outside the project, and copy the new version to WEB-INF/lib (with the same name) and re-deploy, it doesn't seem to be sending the new JAR; everything is still linking to the old one even though it's not even in my WEB-INF/lib anymore. I'm guessing it's being cached by the server or Eclipse is not even realizing something has changed in order to upload the new version. If I just create a new project with the new JAR, everything is fine again (until I have to make another change...) but of course I don't want to have to create a new project for every change to a dependency I make. My question is, how can I make GAE re-upload all the JARs I have from within Eclipse? Thanks in advance, guys :) -Adrian

  Read the article

• Deployment problems of asp.net 3.5 in iis 5.1

  - by peter

  i have microsoft.net 3.5 application and have IIS5.1,,for deploying website do i need to do any thing aother than this 1.In IIS i created virtual directory named SPA and i browsed in to the location where my project is lacated and i added entire project file there( Do i need to add only bin file and login page or i need to add all pages???) 2.In asp.net folder i selected tab version 2.0,, 3.when i browsed i can see all pages when i click login.aspx i am getting this error [SqlException (0x80131904): User does not have permission to perform this action.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +821651 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +133 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 ChatTool.LoginForm.Page_Load(Object sender, EventArgs e) in D:\Chat tool_Ameya\ProjectCode\Unisys Project Testing\Unisys Project\Login.aspx.cs:25 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436

  Read the article

• Can you catch exceeded allocated memory error before it kills the script?

  - by kristovaher

  The thing is that I want to catch memory problems before they happen. I have a system that gets rows from database and casts the returned associative array to a variable, but I never know what the size of the database result is is or how much memory it will take once the database request is made. This means that my software can fail simply because memory is exceeded. But I want to avoid that somehow. One of the ways is to obviously make database requests that are smaller, but what if this is not possible or what if I do not know the size of data that is returned from database? Is it possible to 'catch' situations where memory use is exceeded in PHP? Something like this: $requestOk=memory_test(function(){ return doSomething(); }); if($requestOk){ // Memory seems fine // $requestOk now has the value from memory_test() function } else { // Function would have exceeded memory } I just find it problematic that my script can just die at any moment because of memory issues. From what I know, try-catch cannot be used here because it is a fatal error. Any help would be appreciated!

  Read the article

• net c# lock statement in data access layer

  - by Pedro Rivera

  I saw a code where they have the data access layer like this: public class CustomerDA{ private static readonly object _sync = new object(); private static readonly CustomerDA _mutex = new CustomerDA(); private CustomerDA(){ } public CustomerDA GetInstance(){ lock(_sync){ return _mutex; } } public DataSet GetCustomers(){ //database SELECT //return a DataSet } public int UpdateCustomer(some parameters){ //update some user } } public class CustomerBO{ public DataSet GetCustomers(){ //some bussiness logic return CustomerDA.GetInstance().GetCustomers(); } } I was using it, but start thinking... "and what if had to build a facebook like application where there are hundreds of thousands of concurrent users? would I be blocking each user from doing his things until the previous user ends his database stuff? and for the Update method, is it useful to LOCK THREADS in the app when database engines already manage concurrency at database server level?" Then I started to think about moving the lock to the GetCustomers and UpdateCustomer methods, but think again: "is it useful at all?"

  Read the article

• Coolstack MySQL Crash Unable to Restart

  - by rayblasdel

  Environment: Solaris 10 This mysql server has been up and running for 6 months now. Today all of a sudden it crashed. When typing 'mysql' as user it gives the error MYSQL" Error 2002 (HY000): Can't Connect to Local MySQL server though socket '/tmp/mysql.sock' The server try to open mysql, it stays open for 9-10 seconds and restarts the process. Below are the application logs. Application-database-mysql_mysql-csk.log [ May 30 22:37:52 Enabled. ] [ May 30 22:37:58 Rereading configuration. ] [ May 30 22:37:59 Executing start method ("/opt/coolstack/lib/svc/method/svc-cskmysql start") ] /opt/coolstack/mysql/bin/mysqld_safe --user=mysql --datadir=/dbpool1/data --pid-file=/dbpool1/data/database.soliaonline.com.pid [ May 30 22:37:59 Method "start" exited with status 0 ] [ May 30 22:38:13 Stopping because all processes in service exited. ] [ May 30 22:38:13 Executing stop method ("/opt/coolstack/lib/svc/method/svc-cskmysql stop") ] [ May 30 22:38:13 Method "stop" exited with status 0 ] [ May 30 22:38:13 Executing start method ("/opt/coolstack/lib/svc/method/svc-cskmysql start") ] /opt/coolstack/mysql/bin/mysqld_safe --user=mysql --datadir=/dbpool1/data --pid-file=/dbpool1/data/database.soliaonline.com.pid [ May 30 22:38:13 Method "start" exited with status 0 ] [ May 30 22:38:25 Stopping because all processes in service exited. ] [ May 30 22:38:25 Executing stop method ("/opt/coolstack/lib/svc/method/svc-cskmysql stop") ] [ May 30 22:38:25 Method "stop" exited with status 0 ] I am hoping someone might have run into this before and might know how to fix it. The following is an excerpt from the MySQL Error log 100530 22:44:03 mysqld_safe mysqld from pid file /dbpool1/data/database.soliaonline.com.pid ended 100530 22:44:04 mysqld_safe Starting mysqld daemon with databases from /dbpool1/data InnoDB: Log scan progressed past the checkpoint lsn 32 727170612 100530 22:44:13 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... InnoDB: Doing recovery: scanned up to log sequence number 32 727200901 100530 22:44:14 InnoDB: Starting an apply batch of log records to the database... InnoDB: Progress in percents: 100530 22:44:14 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=209715200 read_buffer_size=1048576 max_used_connections=0 max_threads=10000 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 31024253 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. enter code here

  Read the article

• Thoughts on GoGrid vs EC2

  - by Jason

  I am currently hosting my SaaS application at GoGrid (Microsoft stack). Here's what I have: Database Server - physical box, 12 GB RAM, 2 X Quad Core CPU (2.13 GHz Xeon E5506) 2 Web / App servers - cloud servers, 2 GB RAM, 2 VCPUs 300 GB monthly bandwidth I am paying around $900 / month for this. My web / app servers are busting at the seams and need to be upgraded to 4 GB of RAM. I also need a firewall, and GoGrid just added this service for an additional $200. After the upgrade, I will be paying around $1,400. I started looking at Amazon EC2, specifically this config: Database server - "High Memory Double Extra Large Instance" - 34 GB RAM, 13 EC2 compute units 2 Web / App servers - "Large Instance" - 7.5 GB RAM, 4 EC2 compute units If I go with 1 year reserved instances, my upfront cost would be $4,500 and my monthly would be $700. This comes to $1,075 / month when amortized. Amazon also includes a firewall for free. Here are my questions: Do any of you have experience running a database (especially SQL Server) on an EC2 instance? How did it perform compared to a dedicated machine? One of my major concerns is with disk I/O. Amazon's description of a compute unit is fairly vague. Any ideas on how the CPU performance on the database servers would compare? I am hoping that the Amazon solution will provide significantly better performance than my current or even improved GoGrid setup. Having a virtual database server would also be nice in terms of availability. Right now I would be in serious trouble if I had any hardware issues. Thanks for any insight...

  Read the article

• CodeIgniter's Scaffolding not working

  - by 01010011

  Hi, I keep getting a 404 Page Not Found whenever I try to access CodeIgniter's Scaffolding page in my browser, like so: localhost/codeignitor/index.php/blog/scaffolding/mysecretword I can access localhost/codeignitor/index.php/blog just fine. I followed CodeIgnitor's instructions in their "Create a blog in 20 minutes" by storing my database settings in the database.php file; and automatically connecting to the database by inserting "database" in the core array of the autoload.php; and I've added both parent::Controller(); and $this-load-scaffolding('myTableName') to blog's constructor. It still gives me this 404. Any suggestions?

  Read the article

• PHP: How should I move my code from dev to production?

  - by Teddy

  I have created a PHP web-application. I have 3 environments: DEV, TEST, PROD. What's a good tool / business practice for me to move my PHP web-application code from DEV to TEST to the PROD environment? Realizing that my TEST environment still only connects to my TEST database; whereas, I need to PROD environment to connect to my PROD database. So the code is mostly the same, except that I need to change my TEST code once moved into PROD to connect to the PROD database and not TEST database. I've heard of people taking down Apache in such away that it doesn't allow new connections and once all the existing connections are idle it simply brings down the web server. Then people manually copy the code and then manually update the config files of the PHP application to also point to the PROD instance. That seems terribly dangerous. Does a best practice exists?

  Read the article

< Previous Page | 687 688 689 690 691 692 693 694 695 696 697 698  | Next Page >