Search Results

Search found 23008 results on 921 pages for 'window manager'.

Page 691/921 | < Previous Page | 687 688 689 690 691 692 693 694 695 696 697 698  | Next Page >

• Is it possible to update Lenovo T500 hybrid graphics driver?

  - by Shiki

  Hope someone had the same problem before. My laptop comes with two video "cards". Intel MHD4500 and ATI Radeon HD3650 (mobility). I can switch between them with the "Lenovo Battery Manager" from the taskbar. All good, but Lenovo provides the driver for this. The problem with that driver is they are a bit old. (Both Intel and ATI). For example I doubt I have any gpu accel in flash, and I experience some problem with dual display setup, which the new ATI driver would solve. Basically I want to create a new driver (I read a topic where a guy said its possible... baaack then when I was searching for something else). One needs a special ATI driver creation utility or what... sorry I can't recall the name of it. Thanks in advance. (Ah yes I forgot: The OS is a Windows 7 x64 Ultimate.)

  Read the article

• Low 'Burst Rate' from SATA drive in HDTune?

  - by UpTheCreek

  I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks UPDATE: Acorting to this page on the HDTune website... An important parameter of the test is the Burst Rate. This value should always be higher than the maximum transfer rate. A lower value is usually an indication of a configuration problem. So what might be the configuration problem?

  Read the article

• apt unable to install particular version of package (but gives no error)

  - by Arc2009

  I'd like to install particular version of libstd++6 with following command: # apt-get install libstdc++6=4.9.0-8 -V Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libstdc++6 (4.8.2-16) 0 upgraded, 0 newly installed, 0 to remove and 216 not upgraded. It gives no error, but apt keeps version that was already installed. And also it refers to this package as "extra". There's no apt preferences set in /etc/apt/preferences.d. And the desirable version is definetely available through our local mirror. (If I try to run "apt-get download libstdc++6=4.9.0-8" it will download exactly desirable version.) System info: # cat /etc/issue.net "Debian GNU/Linux jessie/sid" # uname -a Linux www27 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux. # dpkg -l |egrep -i "apt|dpkg" ii apt 0.9.16.1 amd64 commandline package manager ii dpkg 1.17.6 amd64 Debian package management system Any suggestions?

  Read the article

• How can I import tasks into Project that have already been started?

  - by unknown

  I am writing a feature to import tasks from an online bug tracking / project management tool into Microsoft Project, primarily for resource leveling. Currently I am importing all tasks in as Fixed work, and giving them an assignment to a single resource for 100% of the work. The duration is then dynamically calculated, which at import time is equal to the amount of work. However, I am not a project manager by any means, and am having difficulty on how to get the start dates to calculate correctly. I've never used Project either. I am using Schedule From Start and setting the Project Start Date to the date the contract was signed / work was approved. However, this can be in the past, and I do not want current tasks scheduled from that date. Should it be today then? Another problem I have is with tasks that were already started. I have remaining work set, and I was placing a constraint on them to be started on the day the work was first applied. However, the remaining work for the task would be scheduled from that date, which was sometimes in the past. Using task constraints, a project start date, and whatever other settings available to me that I don't know about, what is the correct way to have the tasks scheduled?

  Read the article

• Computer will freeze/ lock up after doing relatively stressful things

  - by GrowingCode247

  I'll first start off by saying that the issue GENERALLY doesn't occur unless I'm doing something remotely stressful for my computer. This issue used to occur whenever it felt it was necessary, however has not occurred completely randomly for a while now (thankfully) My computer's specs: CPU: AMD Phenom II X4 960T GPU: GeForce GTX 760 Memory: 16 GB RAM Resolution Used: 1680x1050, 59Hz (strange number for refresh rate?) res is highest for monitor Nvidia Driver version: 331.65 OS: Microsoft Windows 7 Ultimate (64-bit) Sometimes I will be able to go 2-3 games (about an hour, depending) and sometimes it will go maybe one game (20-30 minutes) and then my computer will run sluggishly and leave me unable to do much of anything. I can sometimes interact with programs at a very basic level (maximizing, minimizing), and I usually cannot close them in any way, not even through Task Manager. The highest temperature my GPU reaches is 76C, with the average being around 73C. During the time the temperatures are around 73C, my GPU's RAM usage is anywhere between 1250-1300 (out of 2GB). My CPU's temperature never goes over 60C, thankfully. The PSU should be fine. It's very mildly dusty but I feel as though that would not be causing this problem... I will clean it out as soon as everything else has been ruled out. Honestly I have no clue how to test the PSU for problems - same goes for my Motherboard. I cannot really think of what could be causing these freezes otherwise. Event Viewer details: EventID: 1 - VDS Basic Provider (I've no clue what this is) EventID: 3 - Kernel-EventTracing (Again, lost) EventID: 8003 - bowser (this seems fishy) and the one critical that I know others have been dealing with as I've browsed some other responses on the web: EventID: 41 - Kernel-Power any help to solve this problem would be GREATLY appreciated.

  Read the article

• Win 7 64 with 8 gig of ram, getting running low on memory errors.

  - by John

  I have a new Dell laptop running Win7 64 with 8 meg of ram. If I leave the system running overnight I start getting low memory errors the next day. Looking at task manager it shows 6.27 gig used but looking at the processes list the totals don't show nearly that much. I am showing all processes from all users. I have also looked at the processes with PRocess Explorer and see the same results. Using resource monitor I see 4165 MB in Use, 2328 MB Modified and 1352MB Standby with only about 345 MB free. These numbers don't seem to add up to what I have running. I have Visual Studio 2010 running along with a number of IE8 sessions. I have run the same set of apps with XP SP2 32 bit with 4 gig of memory and never had this sort of problem. What is Modified memory? What is Standby memory? Any suggestions on what might be the issue and what might be a fix? TIA J

  Read the article

• Why can I not edit, delete directories inside of this directory

  - by user43053

  Hello there, First, I thought this was PHP related, but maybe it isn't. My original post, which may be irrelevant now is located at the bottom. The problem is I have a directory : /articles/. In it are 10 sub directories. I have been changing the permissions lately, but now it seems all the permissions of the parent folder, sub-folders and files are either chmod 755 or 777. I cannot move, delete or edit files inside of this parent directory or sub-directories with my FTP-client. I can however edit, delete, create new files and directories and change them with PHP-functions without problems. What may the problem be? OLD POST. Ignore everything below this line: If I create a directory with mkdir(), or create a file with fopen(), file_put_contents() or SimpleXMLElement::asXML(), I am unable to access the file with my FTP-client or c-Panel File Manager. If I try to delete or edit them, I get errors. Dreamweaver suggests it is a permission problem or a network or filesystem fault (but I've set the permissions with chmod() to 0777, and when I check the cPanel, it confirms chmod 777. I also tried to use fileowner() and the function returns int(99), the same owner as those files that I could access with my FTP-client. It seems files and directories created with PHP can only be modified or be deleted with PHP. I thought this must be a server setup related issue, so I write it here. I am on a shared server, and I have no idea about setting up servers. EDIT: It seems the problem is different. I cannot move files with FTP-client to the parent, or sub-directories either. This problem may not be PHP related, then. It seems the problem applies to any directory, regardless of whether it was created by PHP. EDIT 2: The parent directory has chmod 755. Thank you for your time. Kind regards Marius

  Read the article

• Subversion: Secure connection truncated

  - by Nick

  Hi, I'm trying to set-up a subversion server with apache2/webdav access. I've created the repository and configure Apache according to the official book, and I can see the repository in a webbrowser. The browser shows: conf/ db/ hooks/ locks/ Although clicking any of those links gives an empty xml document like: <D:error> <C:error/> <m:human-readable errcode="2"> Could not open the requested SVN filesystem </m:human-readable> </D:error> I've never used subversion before so I assume this is correct? Anyway, when I try to connect via a command line client, it asks for my password, I give it, then I get the (useless) error message: svn: OPTIONS of 'https://svn.mysite.com': Could not read status line: Secure connection truncated (https://svn.mysite.com) The command I'm using is: svn checkout https://svn.mysite.com/ svn.mysite.com Subversion was installed using Ubuntu's package manager. It's version 1.6.6 on Ubuntu 10.04. My Virtualhost Cofiguration: <VirtualHost 123.123.12.12:443> ServerAdmin [email protected] ServerName svn.mysite.com <Location /> DAV svn SVNParentPath /var/svn/repos SVNListParentPath On AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> # Setup The SSL Certificate Paths SSLEngine On SSLCertificateFile /etc/ssl/certs/mysite.com.crt SSLCertificateKeyFile /etc/ssl/private/dmysite.com.key </VirtualHost>

  Read the article

• Shell replacement for kiosk environment with desktop icons

  - by tuesprem

  I have to deploy around 80 touch-screen terminals for my company. We're going to run several Windows applications on those terminals and they'll be operated by touch input only. I basically want those machines to run in a kiosk mode, so employees won't be able to launch any programs than the ones they're supposed to (also, this will hide the task bar/start menu, which will give it a much nicer, corporate look). There's usually one app that should automatically launch on startup and other apps that can be launched from the desktop. I've tried to accomplish this (under Windows 7 Pro) with a custom shell replacement. This removes the task bar/start menu like I described earlier. I used an AutoHotKey script for this, because it's easy to, for instance, define hotkeys so admins will still be able to launch stuff like Windows Explorer (okay, I know I could just launch it from the task manager [Ctrl+Shift+Esc] but I'm considering locking that as well). So far so good. Some problems though: No desktop icons. Needed to launch apps from the desktop. No wallpaper. Required for CI. Is there any way around this? I wouldn't mind using another shell replacement, as long as it's reasonably lightweight. I'd love to get the wallpaper and desktop icons to show with something like AutoHotKey though. Thanks!

  Read the article

• What apps can you only get on Mac and not Windows?

  - by ytk

  What apps do you absolutely have to use a Mac to run, and there are no decent Windows PC equivalent? This is not a religious war. Please be specific and practical It doesn't have to be a direct 1-2-1 comparison, but overall usefulness to the task I'll start off with a few: KeyNote -- the animations are quite cool and not available in PowerPoint iTune's photo sync -- on Windows it makes copy of all the photos you want to sync, effectively double the space taken up by your photos. On a Mac it's easier as long as you use iPhoto Keychain -- a centralized password manager tied to the OS. The benefit of this is you don't have to set a Master Password (like Firefox) which you need to enter when starting the browser. And it doesn't reveal your password (like Chrome, which makes no effort in hiding the password you have stored in Options) Time Machine -- 0-configuration backup in the background. Easy interface for restoring a file, or even just a contact in the address book. Text-to-speech -- works in any program, and sounds better than Windows computer voice Quick View -- press space bar to preview a file. Windows95 had quick view, but was removed.

  Read the article

• hg clone has stopped working on my Vista box

  - by vkraemer

  I have a Windows Vista machine that has been connecting to http://hg.netbeans.org productively for awhile... until recently. Lately, when I attempt to pull or clone, the update appears to stall... I see the following messages on the screen when I attempt to clone: destination directory: web-main requesting all changes adding changesets And then... nothing happens. I have opened the Task Manager and there doesn't appear to be any significant network activity for HOURS. I can contact the server with FireFox and see the proper output. I can clone from the repo with Solaris and/or Mac OS X... so the issue doesn't appear to be at the 'other end'. I had been running a fairly old version of Mercurial before this started happening. After it started happening, I upgraded to Mercurial 1.5.2.. which did not help resolve the issue at all. What are the likely causes and work-arounds for this?

  Read the article

• How two completely unrelated software can affect each other in a very strange manner?

  - by user40602

  I installed an old game on my old PC and it doesn't work; its process/exe file was listed in task manager but nothing appeared on the screen. then some time later i discovered that when some specific program was running an my pc, that game could be executed without that problem! although i am myself a power user and also a programmer, i couldn't find the reason, and don't have any good guesses about it. i just know that when i want to run that game i should have another specific and unrelated program running. i ask if anyone has any idea/guess about the possible reasons for this rare phenomenon! oh and if u ask about the details/names of those programs, i am afraid of telling that, because others may think i am kidding, but i am not (please believe me!), that game is NFS2 and the other program is mysqld.exe (i said before that i am a programmer!). I don't know how mysqld.exe (yes it is the windows version of the famous MySQL DBMS server) can affect NFS2 in such an strange manner, and my curiosity and profession don't let me to forget seeking for the answer, so i decided to take the help of others to see if someone has had a similar experience or a reasonable idea about it.

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• Virtual machine shows no network adapter

  - by Logman

  I had a an old Lotus/Domino server (R5), I just virtualized. It ran Windows 2000 server. I had to use Vmware Converter v3.x to create the vm because it was the only one I could find that could actually do a Win2k machine that had no service packs. It was just put out to pasture a couple months ago, so it isn't being used except to store the old email for archiving. It took a bit of work to get it onto the Win2008R2 servers hyper-v but I got it there. Problem now, is that the network adapter didn't show up. I could not install the guest additions because it needed sp4 + on win2k... so I installed sp4 onto the vm guest. Everything seems fine except the network adapter still isn;t showing up in device manager. NOthing. Now this server had an external ip, and I did not want it to be put onto the internal virtual network. I am going to use a dedicated adapter on the host (hyper-v server) if that matters... but this shouldn't matter if the the guests network adapter doesn't show at all. Thoughts?

  Read the article

• Increasing link speed on OpenVPN (bandwidth)

  - by Mike

  I have bought a tunnel service by using OpenVPN. For a year I've had 10 Mbps max upload/download speed but now I've bought an additional 20 Mbps making the available total bandwidth 30 Mbps for me. On their homepage there are some controls available for me, for example to restart the tunnel. I've done that. It also says that the speed has indeed been upgraded to 30 Mbps on their page. I also got an email that said they have upgraded the speed. However after I reboot my machine, and OpenVPN has started up and is running as usual, when I look at the Windows Task Manager (opens when pressing CTRL+SHIFT+ESC) in the "Networking" tab I still have a link speed of only 10 Mbps. Two adapters are listed: Local Area Connection 4 (10 Mbps) and Local Area Connection 5 (100 Mbps). LAC5 is my "real" adapter, I have a 100 Mbps Internet connection if I don't use a tunnel. LAC3 is the virtual adapter used by OpenVPN. The problem is that it is still showing 10 Mbps even though I have upgraded to 30 Mbps. How can I fix this?

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• Where is SQLite on Nokia N810? How to get?

  - by klausnrooster

  I need SQLite3 with the TCL interface for a simple command-line app I use on all my PCs and want to use on my new (to me) Nokia N810. But "find" does not find any SQLite on the Nokia N810. Several apps use it, supposedly, like the maps/gps (poi.db), and others. I got sudo gainroot before using find, tried with wildcards * and dot . No luck. I guess it's embedded in the apps that use it? The N810's app manager doesn't offer SQLite. Apt-get has it and then fails with error: "Unable to fetch some archives, ..." The "update" and "--fix-missing" options do not help. I don't really want to get scratchbox and compile SQLite and TCL extension for it from sources. I looked at README and it seems like it might be straightforward. However [1] it's not clear what scratchbox download I would need (there are dozens in the Index of /download/files/sbox-releases/hathor/deb/i386), [2] I've never compiled any C sources successfully before, [3] and the whole mess entails a lot of learning curve for what is a very small one-off personal project. http://www.gronmayer.com/ has a few (sqlite (v. 2.8.17-4), libsqlite0 (v. 2.8.17-4), and libsqlite0-dev (v. 2.8.17-4)) but they appear to part of some huge package, may or may not include the TCL interface, ... and no I don't want to port my tiny app to Python. Is there some option I've overlooked? Must I get scratchbox and compile for ARM myself? Thanks for your time.

  Read the article

• Formatting a former RAID 0 drive through USB

  - by EXC

  I'll try to be as specific as possible here: I was using two Hitachi 2.5" 500 gb HDDs in my Gateway P-7805u laptop in a RAID 0 configuration. The array was causing the laptop to run extremely hot, however, so I removed them and deleted the RAID array through Intel Matrix HDD manager. I did a clean install of Windows 7 on the original 320 gb HDD that came with the laptop. I never did format the original RAID array HDDs before taking them out of the computer. Now, I am attempting to format the Hitachi 500 gb RAID array HDDs externally through a USB external enclosure. The external HDD drivers install on my clean install OS, but when I go into 'My Computer' there is no external drive available. I cannot format in CMD Prompt because my computer will not designate a drive letter to the external HDD. The drivers install and the HDD is recognized as a Hitachi external drive, but nothing seems to show up in my computer window. I need to know if there is a way to format these drives to NTFS externally.

  Read the article

• How can I get DVDs playing after a Vista to XP change? [closed]

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• Data recovery on working hard drive

  - by emgee

  So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

  Read the article

• Cannot browse Visual SVN Repositories

  - by user1783560

  I went through Unable to browse repository after setting visual SVN Server and tried to implement the answer suggested but even the IP address is not solving my problem. I have 1) Turned off firewall 2) Set the directory C:\Program Files (x86)\VisualSVN Server security rights to "full control" for all groups including "Network service" group. 3) Set the directory D:\Repositories security rights to "full control" for most groups including "Network service" group. 4) Tried switching between secure and non-secure connection option in visual svn server manager. 5) Tried different with port numbers. Including 443 (with https) and 80 (http). Also tried giving random ports with/without https. Using computer name/ IP address in the url doesn't help. Windows network diagnostics - Troubleshooting report has following message for me. Security policy settings or firewall settings on this computer might be blocking the connection. = Detected Can someone guide me please? I have spent more than two weeks on this now without any solution. Thanks in advance! I appreciate your responses.

  Read the article

• Windows user moving to Ubuntu 12.04. Where are the system tools, or equivalents?

  - by Big Endian

  I am a Windows user who has begun experimenting with Ubuntu. Ubuntu seems great, but for all the things it seems like I CAN'T do. How do I get to advanced administration stuff, like the list of drivers, all of the installed software, and something equivalent to Windows' Device Manager. I always heard that Linux was supposed to be very raw, and you had to have lots of computer experience to make it work. This seems just the opposite. Ubuntu seems very modern and user friendly, better in some regards than any operating system I have seen. Unfortunately, I can't find any of the guts of this system beneath all of the user friendly frosting... gunk... crap... stuff. I'm reminded more and more of an Apple computer (except Linux is more affordable :). So how do I peel back this layer and start using the computer? A solution other than installing Gnome 3 would be appreciated.

  Read the article

• Recover deleted folder form bookmarks bar?

  - by OverTheRainbow

  I googled for this, but didn't find an answer. I removed a folder in Google Chrome's Bookmarks bar. Chrome says nothing when doing this, and I assumed it wouldn't actually delete the data from the Bookmarks manager, just the folder in the Bookmarks bar. Turns out I was wrong, and now I lost hundred's of URLs. I closed and restarted Chrome since then, so data is apparently no longer on disk. Since Google Sync is on by default, it says I have "536 bookmarks", I installed Chrome on another computer, logged on to Google... but the folder is still gone. I can't believe Chrome doesn't prompt the user with an obvious message for something that important. Is there somehow a way to recover a folder removed from the Bookmarks bar? Thank you. Edit: Amazingly, Chrome doesn't 1) provide a way to remove an item from the Bookmarks bar without also deleting it from the Bookmarks list, and 2) doesn't even warn the user of the consequences when doing so! The only way to recover data is: if you haven't closed the browser yet, make a backup of the Bookmarks file, close the browser, replace the now-leaner Bookmarks file with the previous version, and restart Chrome if you have closed it, recover the file from your backup. You did backup that file, right? ;-)

  Read the article

• Verizon overbilling me ?

  - by bek

  I have verizon air card for my internet. Which is called vz manager. I have had it for about a year. Keeping within my usage allowance the whole time until 3 months ago, when my bill came in my 5,000 g allowance was ran to 18,000. It has continued to do so through the last 3 months. My usage reset itself yesterday for the new month. I got on google for about 5 minutes and chatted for about an hour yesterday online. Mind you that I have never done anything any different then i do everyday. I do not download music or watch videos on my computer, nothing like that. Well since last night a 8 pm my usage sayd 1109.525 gb. ALREADY! For being on the internet for an hour with no downloads. What could be causing this, please thrown me some ideas. Verizon is checking on the problem, but that usually doesnt get me the answer i want. Can someone be hacking my card and using internet through it, has told me that that is not possible, however I think with the internet anytihng is possible.

  Read the article

• Website with login: everything works. Website without login: menu items don't redirect to content

  - by user3660755

  I wanted to put the website online. I saw it still had a login screen. It needs to be accesible for everyone. unpublishing the module did not work. I checked the user access view and took the login url out of the template manager. After this the login screen was gone at the page. But when I click on any of the website menu items, it doesn't redirect to the content. When I do have the login screen and put in the username and password all the menu's work just fine. I checked the url it is the same with or without login. How is this possible? I have been asking a lot of people, but no ones seems to be able to give me a hint. I have been searching for the solution myself for more than a week, I just don't know anymore. My guess is that there must be a conflict in the redirection, but I am not skilled enough to recognize it I am affraid. Any tips would be more than welcome. Thank you

  Read the article

< Previous Page | 687 688 689 690 691 692 693 694 695 696 697 698  | Next Page >