Search Results

Search found 27958 results on 1119 pages for 'failed to load viewstate'.

Page 693/1119 | < Previous Page | 689 690 691 692 693 694 695 696 697 698 699 700  | Next Page >

• VLC Ati Radeon 6870 Ubuntu 12.04 image skewed flicker

  - by Aaron

  I'm running Ubuntu 12.04 with ATI Radeon 6870 connected to my 40' Sharp TV. The video image is slightly jigged, like breaking a bit and slightly delayed. It just isn't smooth. The computer is very fast, like i7 with 12gb ram. I tried to run the same video with my mac laptop and on the tv with the same connection cable and it was running smoothly. i tried changing the video output in VLC to x11, increase caching, h264 skip loop filter to all, increase monitor refresh rate although it's already at 60 and it's an LCD tv. this is my xorg.conf : Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[3]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-DFP9" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1920x1080" EndSection Section "Monitor" Identifier "0-DFP10" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "amdcccle-Device[3]-0" Driver "fglrx" Option "Monitor-DFP9" "0-DFP9" BusID "PCI:3:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[3]-0" Device "amdcccle-Device[3]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Why cant i install ANY operating system??

  - by Ranhiru

  I tested the memory and i tested the hard disk and everything is fine! Mini XP booted from Hirens Boot Disk works :( I tried Windows 7, Windows XP SP3 and even Ubuntu 10.04 :( All Operating Systems boots up to the point where they can load necessary files to start the OS and then resets the laptop Windows 7, only up to the point where the Windows Loading Animation is happening Ubuntu, only up to the point where the loading is done, shows a small screen and then goes to a blinking cursor and thats it... it keeps on blinking and sometimes resets the computer Windows XP SP3, loads all the drivers and everything and then the point where i should be able install the OS, it simply resets the laptop :( I have used the word reset instead of restart because the laptop completely turns off and then only turns back in Any solutions would be greatly appreciated

  Read the article

• Which web browser support running multiple sessions simultaneously?

  - by leonbnu

  basically, I want to group my tabs by categories and then split them to different sessios(winows). For example, I can have one windows which contains all the tabs that are work related, and some other windows that are for news, everyday use, hobbies, entertainment, etc. So I can load these sessions/windows independently whenever I want. More importanly, I need the browser to be able to manage these sessions separately, for example, when I close one window(session), it should be able to autosave it without affecting any other sessions. I think this requirement is quite simple. But somehow, neither firefox(with session manager addon) nor opera support this. so which browser actually supports this?

  Read the article

• How to make my simple round sprite look right in XNA

  - by Joshua Perina

  Ok, I'm very new to graphics programming (but not new to coding). I'm trying to load a simple image in XNA which I can do fine. It is a simple round circle which I made in photoshop. The problem is the edges show up rough when I draw it on the screen even with the exact size. The anti-aliasing is missing. I'm sure I'm missing something very simple: GraphicsDevice.Clear(Color.Black); // TODO: Add your drawing code here spriteBatch.Begin(); spriteBatch.Draw(circle, new Rectangle(10, 10, 10, 10), Color.White); spriteBatch.End(); Couldn't post picture because I'm a first time poster. But my smooth png circle has rough edges. So I found that if I added: spriteBatch.Begin(SpriteSortMode.FrontToBack, BlendState.NonPremultiplied); I can get a smooth image when the image is the same size as the original png. But if I want to scale that image up or down then the rough edges return. How do I get XNA to smoothly resize my simple round image to a smaller size without getting the rough edges?

  Read the article

• my linux problems and solutions [closed]

  - by Delirium tremens

  I read somewhere in StackOverflow or StackOverflow Meta that if I had a problem, then solved it myself, I can share the problem and solution with you. How do I? in Linux: remove unneeded packages using apt-get play spc and psf update the system using apt-get in Mint: install lamp install and configure xdebug enable xdebug for cakephp install bazaar colo rename a repository directory when bazaar explorer fails init a repository when bazaar explorer fails use ssh key with launchpad uninstall firefox 3 when synaptic fails install minefield make pearltrees load when flash fails edit clojure documents install compojure create a new compojure project in Kubuntu enable phpmyadmin after installing lamp stop MySQLdb module error in webpy in Ubuntu stop the mouse pointer from disappearing fix the color stop sync read-only filesystem error stop download prompt instead of site enable phpmyadmin after installing lamp enable mod_rewrite after installing lamp

  Read the article

• making cookies persistent in IE8

  - by Jamie Stevens

  There's a website I sign into frequently, and I'm getting sick of entering my username and password every time. The website can remember who I am so long as I don't close my browser (Internet Explorer 8), but when I do it forgets me, and asks me to login again. I'm guessing this is because it's using a cookie (and perhaps a session) that expires when I close my browser. Is there anyway to make this information persistent across each time I load my browser? (I tried exporting the cookies to a file, and then importing them as soon as the browser was reloaded, but that didn't work either... I'm thinking the cookie text file needs to be modified somehow.) (FYI The website is http://blackboard.unh.edu, but you won't have access unless you happen to be a student there :-) NOTE: I'm not interested in using any password remembering features in the browser. The only solution I'm open to is making the cookie / session persistent somehow!

  Read the article

• JDK bug migration milestone: JIRA now the system of record

  - by darcy

  I'm pleased to announce the OpenJDK bug database migration project has reached a significant milestone: the JDK has switched from the legacy Sun "bugtraq" system to a new internal JIRA instance as the system of record for our bug tracking. This completes the initial phase of the previously described plan of getting OpenJDK onto an externally visible and writable bug tracker. The identities contained in the current system include recognized OpenJDK contributors. The bug migration effort to date has been sizable in multiple dimensions. There are around 140,000 distinct issues imported into the JDK project of the JIRA instance, nearly 165,000 if backport issues to track multiple-release information are included. Separately, the Code Tools OpenJDK project has its own JIRA project populated with several thousands existing bugs. Once the OpenJDK JIRA instance is externalized, approved OpenJDK projects will be able to request the creation of a JIRA project for issue tracking. There are many differences in the schema used to model bugs between the legacy bug system and the schema for the new JIRA projects. We've favored simplifications to the existing system where possible and, after much discussion, we've settled on five main states for the OpenJDK JIRA projects: New Open In progress Resolved Closed The Open and In-progress states can have a substate Understanding field set to track whether the issues has its "Cause Known" or "Fix understood". In the closed state, a Verification field can indicate whether a fix has been verified, unverified, or if the fix has failed. At the moment, there will be very little externally visible difference between JIRA for OpenJDK and the legacy system it replaces. One difference is that bug numbers for newly filed issues in the JIRA JDK project will be 8000000 and above. If you are working with JDK Hg repositories, update any local copies of jcheck to the latest version which recognizes this expanded bug range. (The bug numbers of existing issues have been preserved on the import into JIRA). Relatively soon, we plan for the pages published on bugs.sun.com to be generated from information in JIRA rather than in the legacy system. When this occurs, there will be some differences in the page display and the terminology used will be revised to reflect JIRA usage, such as referring to the "component/subcomponent" of an issue rather than its "category". The exact timing of this transition will be announced when it is known. We don't currently have a firm timeline for externalization of the JIRA system. Updates will be provided as they become available. However, that is unlikely to happen before JavaOne next week!

  Read the article

• Finding the most common errors in event logs using Powershell.

  - by Paul

  I have the event logs for one of our servers locally in .evtx format. I can load the log file into PS using the command: Get-WinEvent -Path D:\Desktop\serverlogs.evtx What I would like to do is on the Message field group events where the text matches by a certain percent (say 80% the same). As we have stacktraces for errors in the details which will be the same, but we also log the client's IP, url that was accessed which will likely be different. I want to group them so that I can work out the most common errors to prioritize fixing them and as there are 25,000+ errors in the log file I would rather not do it manually. I think I can work out how to do most of this, but am not sure how I could do the 'group fields which are mostly the same' part, does powershell have anything like this built in?

  Read the article

• What can cause peaks in pagetables in /proc/meminfo ?

  - by Fuzzy76

  I have a gameserver running Debian Lenny on a VPS host. Even when experiencing a fairly low load, the players start experiencing major lag (ping times rise from 50 ms to 150-500 ms) in bursts of 3 - 10 seconds. I have installed Munin server monitoring, but when looking at the graphs it looks like the server has plenty of CPU, RAM and bandwidth available. The only weird thing I noticed is some peaks in the memory graph attributed to "page_tables" which maps to PageTables in /proc/meminfo but I can't find any good information on what this might mean. Any ideas what might be causing this? If you need any more graps, just let me know. The interrupts/second count is at roughly 400-600 during this period (nearly all from eth0). The drop in committed was caused by me trying to lower the allocated memory for the server from 512MB to 256MB, but that didn't seem to help.

  Read the article

• Please recommend tools for PC, browser, home network performance problems?

  - by mobibob

  My client is experiencing some odd response behavior in their browser for the past few days. Classic, "nothing has changed" so I am starting at ground zero. Browsing a website will timeout or take a ridiculous time to load -- other times, the same site and query is immediately responsive. Once a connection is established, video streams are uninterrupted. The home network hosts a website, but it is not experiencing any activity in Apache's 'access.log' I am using speedtest.net to check if the ISP through the internet is 'OK' -- which looks typical (average +/-). I have to suspect the home network is beaconing or something very abnormal, but I don't know where to start.

  Read the article

• Per-vertex animation with VBOs: Stream each frame or use index offset per frame?

  - by charstar

  Scenario Meshes are animated using either skeletons (skinned animation) or some form of morph targets (i.e. per-vertex key frames). However, in either case, the animations are known in full at load-time, that is, there is no physics, IK solving, or any other form of in-game pose solving. The number of character actions (animations) will be limited but rich (hand-animated). There may be multiple characters using a each mesh and its animations simultaneously in-game (they will be at different poses/keyframes at the same time). Assume color and texture coordinate buffers are static. Goal To leverage the richness of well vetted animation tools such as Blender to do the heavy lifting for a small but rich set of animations. I am aware of additive pose blending like that from Naughty Dog and similar techniques but I would prefer to expend a little RAM/VRAM to avoid implementing a thesis-ready pose solver. I would also like to avoid implementing a key-frame + interpolation curve solver (reinventing Blender vertex groups and IPOs). Current Considerations Much like a non-shader-powered pose solver, create a VBO for each character and copy vertex and normal data to each VBO on each frame (VBO in STREAMING). Create one VBO for each animation where each frame (interleaved vertex and normal data) is concatenated onto the VBO. Then each character simply has a buffer pointer offset based on its current animation frame (e.g. pointer offset = (numVertices+numNormals)*frameNumber). (VBO in STATIC) Known Trade-Offs In 1 above: Each VBO would be small but there would be many VBOs and therefore lots of buffer binding and vertex copying each frame. Both client and pipeline intensive. In 2 above: There would be few VBOs therefore insignificant buffer binding and no vertex data getting jammed down the pipe each frame, but each VBO would be quite large. Are there any pitfalls to number 2 (aside from finite memory)? Are there other methods that I am missing?

  Read the article

• Bitmap Font Displays in Center Always Without Coding it Manually (Fix Coordinate Problem onText)

  - by David Dimalanta

  Is there a way on how to stay the texts in center without manually coding it or something, especially when making an update? I'm making a display for the highest score. Let's say that the score is 9. However, if the score is 9,999,999, the text displays still only at the fixed X and Y coordinate. Is there really a way to stay the text in center especially when there is changes when a player beats the new world record? Here's my code inside Sprite Batch: font.setScale(1.5f); font.draw(batch, "HIGHEST SCORE:", (900/10)*1 + 60, (1280/16)*10); font.draw(batch, "" + 9999999 + "", (900/10)*4, (1280/16)*8); batch.draw(grid_guide, 0, 0, 900, 1280); // --> For testing purpose only. // Where 9999999 is a new record score for example. Here's the image shown as example. I add it some red grid so that I could check if the display of score when updated will always display on center no matter how many digits takes place in. However, it is fixed, so I have to figure it out how to display it automatically on center regardless of the number of digits while updating for the new highscore. I have used the LibGDX preferences very well though to save and load records for the highscore.

  Read the article

• ATI Radeon 5800 series dual monitor unity not 3D accelerated

  - by Victor S

  When I had a single monitor setup, without Xinerama, with my current setup of Ubuntu 11.10, ATI 5800 series card, Unity showed transparencies, shadows, etc. (although graphics was reported as 'Standard' in the control/settings panel). Having switched to a dual monitor setup, dell 24" UltraSharp and a smaller Acer monitor, Unity shows only as 2d, even though I'm not loggin in to that display manager. WebGL performance is very sluggish, I'm getting the impression that the processor is doing all the work and the card isn't even accessible even though the drivers are installed (from the ubuntu repository, I did not compile custom drivers). Any tips on how to enable full 3D accelerationn and video card support. Here is my xorg.conf file: Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP4" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 Screen "amdcccle-Screen[1]-1" 1920 0 EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-DFP4" "0-DFP4" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:1:0:0" Screen 1 EndSection Section "ServerFlags" Option "Xinerama" "on" EndSection More info: fglrxinfo display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5800 Series OpenGL version string: 4.1.11005 Compatibility Profile Context

  Read the article

• Access - Force Form Refresh on New Record

  - by gamerzfuse

  Let me set the stage here a bit: I have an Access project with various buttons, triggers, macros, etc. I needed an Appointment Date field to only show when the button APPOINTMENT MADE is toggled ON. This works great. The problem arises when you submit a form with the APPOINTMENT MADE toggled. Once the record is inserted, the Access file clears all fields, but leaves the Appointment Date enabled, when it should be disabled by default. I have tried the Current, Load, Before Insert, After Insert and many other options on the FORM properties. Am I missing a simple way to force a refresh so the field goes back to it's default DISABLED? Thanks in advance!

  Read the article

• Weird problem, special characters after formatting the hard drive, computer not starting 0_o

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• Slow Starting DHCP Client Service - HP Thin Clients

  - by Ryan

  We have recently began adding XPe thin clients to our domain in preperation for a new citrix environment. One thing that has been picked up on in testing is that they appear slow to boot. The issue manifest's it's self as the classic "Applying Computer Settings..." screen we are all used to seeing. After digging into the issue it appears the DHCP Client service is taking some time to load on boot, this varies but I would estimate it can take around 1 minute in some cases. I've eliminated the classic issues, DHCP is responding correctly and in quick time. DNS is not the cause and GPO's are applying promptly. A simple workaround is to assign the client a static IP which work's great so the TCP/IP servies are obviously firing up quickly, just not DHCP Client. Does anyone have any idea's on how I may be able to improve the service start time? Keen to find a better solution before I get my arm twisted into setting up 250 thin clients with static addressing!

  Read the article

• How do I get a Belkin F5D8053 wireless adapter working?

  - by disassembler

  I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

  Read the article

• Impatient Customers Make Flawless Service Mission Critical for Midsize Companies

  - by Richard Lefebvre

  At times, I can be an impatient customer. But I’m not alone. Research by The Social Habit shows that among customers who contact a brand, product, or company through social media for support, 32% expect a response within 30 minutes and 42% expect a response within 60 minutes! 70% of respondents to another study expected their complaints to be addressed within 24 hours, irrespective of how they contacted the company. I was intrigued when I read a recent blog post by David Vap, Group Vice President of Product Development for Oracle Service Cloud. It’s about “Three Secrets to Innovation” in customer service. In David’s words: 1) Focus on making what’s hard simple 2) Solve real problems for real people 3) Don’t just spin a good vision. Do something about it  I believe midsize companies have a leg up in delivering on these three points, mainly because they have no other choice. How can you grow a business without listening to your customers and providing flawless service? Big companies are often weighed down by customer service practices that have been churning in bureaucracy for years or even decades. When the all-in-one printer/fax/scanner I bought my wife for Christmas (call me a romantic) failed after sixty days, I wasted hours of my time navigating the big brand manufacturer’s complex support and contact policies only to be offered a refurbished replacement after I shipped mine back to them. There was not a happy ending. Let's just say my wife still doesn't have a printer.  Young midsize companies need to innovate to grow. Established midsize company brands need to innovate to survive and reach the next level. Midsize Customer Case Study: The Boston Globe The Boston Globe, established in 1872 and the winner of 22 Pulitzer Prizes, is fighting the prevailing decline in the newspaper industry. Businessman John Henry invested in the Globe in 2013 because he, “…believes deeply in the future of this great community, and the Globe should play a vital role in determining that future”. How well the paper executes on its bold new strategy is truly mission critical—a matter of life or death for an industry icon. This customer case study tells how Oracle’s Service Cloud is helping The Boston Globe “do something about” and not just “spin” it’s strategy and vision via improved customer service. For example, Oracle RightNow Chat Cloud Service is now the preferred support channel for its online environments. The average e-mail or phone call can take three to four minutes to complete while the average chat is only 30 to 40 seconds. It’s a great example of one company leveraging technology to make things simpler to solve real problems for real people. Related: Oracle Cloud Service a leader in The Forrester Wave™: Customer Service Solutions For Small And Midsize Teams, Q2 2014

  Read the article

• Mount "Macrium Reflect" on a partition, boot from there ?

  - by b e

  Can Macrium's Reflect recovery CD be mounted/used with GRUB ? If the cd can be 'put' (loaded/mounted/...) in a partition, then the only disc needed would be the actual recovery disc, which could be on an external hard drive, or even on the same machine in another partition, thus allowing on to recover using only what's on the machine itself. I have WXPpro and Xubuntu8.04 double mounted, really happy with them together, use each right now to fix problems with the other when they come up. Also have a partition for the Reflect CD, but I just can't get it to load from Grub, which would be great... Thanks for any thoughts, probably someone has already done this I know !

  Read the article

• Behaviour Trees with irregular updates

  - by Robominister

  I'm interested in behaviour trees that aren't iterated every game tick, but every so often. (Edit: the tree could specify how many frames within the main game loop to wait before running its tick function again). Every theoretical implementation I have seen of behaviour trees talks of the tree search being carried out every game update - which seems necessary, because a leaf node (eg a behaviour, like 'return to base') needs to be constantly checked to see if is still running, failed or completed. Can anyone suggest how I might start implementing a tree that isnt run every tick, or point me in the direction of good material specific to this case (I am struggling to find anything)? My thoughts so far: action leaf nodes (when they start) must only push some kind of action object onto a list for an entity, rather than directly calling any code that makes the entity do something. The list of actions for the entity would be run every frame (update any that need to run, pop any that have completed from the list). the return state from a given action must be fed back into the tree, so that when we run the tree iteration again (and reach the same action leaf node - so the tree has so far determined that we ought to still be trying this action) - that the action has completed, or is still running etc. If my actual action code is running from an action list on an entity, then I possibly need to cancel previously running actions in the list - i am thinking that I can just delete the entire stack of queued up actions. I've seen the idea of ActionLists which block lower priority actions when a higher priority one is added, but this seems like very close logic to behaviour trees, and I dont want to be duplicating behaviour. This leaves me with some questions 1) How would I feed the action return state back into the tree? Its obvious I need to store some information relating to 'currently executing actions' on the entity, and check that in the tree tick, but I can't imagine how. 2) Does having a seperate behaviour tree (for deciding behaviour) and action list (for carrying out actual queued up actions) sound like a reasonable approach? 3) Is the approach of updating a behaviour tree irregularly actually used by anyone? It seems like a nice idea for budgeting ai search time when you have a lot of ai entities to process. (Edit) - I am also thinking about storing a single instance of a given behaviour tree in memory, and providing it by reference to any entity that uses it. So any information about what action was last selected for execution on an entity must be stored in a data context relative to the entity (which the tree can check). (I am probably answering my own questions as i go!) I hope I have expressed my questions adequately! Thanks in advance for any help :)

  Read the article

• Can't install alternate CD from USB?

  - by mattias

  Hi im trying to install ubuntu 12.04 with full hard disk encryption. After downloading and installing the Ubuntu live CD, I learned that truecrypt doesnt support full disk encryption on linux. I also learned that the best way to get "nearly full disk encryption" on ubuntu is by installing it from the alternate install CD. I tried that, but something is wrong with my CD reader/burner so it doesnt boot up when i insert the cd. My thought here was to take the .iso that I downloaded on my unencrypted Ubuntu system, use Unetbootin to make the usb drive. The usb drive used for this is exactly the same brand as one that I know has worked with a previous ubuntu live system on the same computer. I also used unetbootin for that usb, but I created it from windows that time. The usb stick boots up fine and i get through the first couple of steps in the installation process. However, After a while I get a "box" with the following error message "Load Installer components from CD" There was a problem reading data from the CD-ROM. Please make sure it is in the drive. If retrying does not work, you should check the integrity of your CD-ROM. "Failed to copy file from CD-ROM. Retry? " Then I cant get any further. I googled a lot and found this page which seems to tackle this very problem: http://www.dotkam.com/2010/11/29/ins...mage-from-usb/ I tried to do what it said. After pressing TAB, I wrote : cdrom-detect/try-usb=true without quotes because that's what i think is right. When I press TAB, there already is a text saying : /ubnkern initrd=/ubninit vga=788 -- quiet which can be removed. I have tried to both delete the text before the "--" and just inserting cdrom-detect/try-usb=true before it. Any idea of what can be wrong? I would like to do a full system encryption, or as full as it is possible. I dont want to just encrypt my /home folder. Maybe this isn't the easiest way. I use SanDisk usb sticks. I know there is a problem with U3 launcher on some SanDisks, but I never had to remove U3 before from similar disks, and the alternate install does boot up, so I dont think using U3 removal would help me. Any help or indication to an easier way to do this would be appreciated

  Read the article

• Unable to boot Ubuntu 64-bit in Virtualbox on Mac OS X

  - by Aamir

  I have latest generation Macbook Pro 7.1 (Intel Core 2 Duo) running Mac OS X 10.6.6. I installed Virtuabox 4.0.2 and tried to boot Ubuntu 10.10 64-bit iso. The boot options screen from the live CD came up: However when I continued to load the live session, or installer for that matter, I encountered the following error: This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropriate for your CPU. I am not sure if VT-x is enabled or is supported in the Core 2 Duo of my Macbook Pro. But at least, I have both I/O APIC and VT-x enabled for hardware virtualization as told in the Virtualbox manual.

  Read the article

• Xna, after mouse click cpu usage goes 100%

  - by kosnkov

  Hi i have following code and it is enough just if i click on blue window then cpu goes to 100% for like at least one minute even with my i7 4 cores. I just check even with empty project and is the same !!! public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; private Texture2D cursorTex; private Vector2 cursorPos; GraphicsDevice device; float xPosition; float yPosition; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void Initialize() { Viewport vp = GraphicsDevice.Viewport; xPosition = vp.X + (vp.Width / 2); yPosition = vp.Y + (vp.Height / 2); device = graphics.GraphicsDevice; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); cursorTex = Content.Load<Texture2D>("strzalka"); } protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); spriteBatch.Draw(cursorTex, cursorPos, Color.White); spriteBatch.End(); base.Draw(gameTime); } }

  Read the article

• Large keepalive_requests values are severely slowing-down Nginx

  - by Gil

  When running a bacon (43-byte transparent pixel) load test on Nginx, we have tried several keepalive_requests values (from 10 to 100,000) and the optimal value seems to be 10. Here are the server HTTP headers of this tiny reply: HTTP/1.1 200 OK Server: nginx/1.5.6 Date: Wed, 23 Oct 2013 12:39:45 GMT Content-Type: image/gif Content-Length: 43 Last-Modified: Mon, 28 Sep 1970 06:00:00 GMT Connection: keep-alive Nginx is twice slower with keepalive_requests 100000 than with keepalive_requests 10. Can you help understanding that result? Or tell what we do wrong? For reference, here is the nginx.conf file.

  Read the article

• CIFS shares do not mount after upgrade to 12.10 from 12.04

  - by Mothball

  I have seen issues close to my problem but no one seems to have a definitive answer as to what is going on and why the failure occurs. I have a number of NAS devices on my home network and on a previous install of 12.04 and version prior mounting at login worked using this entry for each in fstab: //servername/sharename /media/windowsshare cifs guest,uid=1000,iocharset=utf8,codepage=cp850,cp850 0 0 Now when I use this, 12.10 reports the standard - cannot mount bad option ... blah blah... The kern log reports that the CIFS option "codepage" unknown... changed entry to "unicode" and received the same error message. There are no other error messages or log entries that would indicate another issue, but this is the statement I used for quite awhile with version 12.04 and before. Is the codepage option obsolete in 12.10/CIFS now? Is there a codepage support program that I must load? Is there some kind of helper program that is required to supports the codepage option? A current review of the man pages at samba.org does not make mention of the option "codepage". Extremely confused - any help/insight would be greatly appreciated.

  Read the article

< Previous Page | 689 690 691 692 693 694 695 696 697 698 699 700  | Next Page >