disk performance - Page 694

Did I lost my RAID again?

- by BarsMonster

Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful so it even can reshape arrays so you can start with a smaller array and the grow it as you need. I've bought 3x1Tb drives and made RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as a spare and run a command to grow array to 7-disk. It started working, but speed was ridiculously slow, ~100kb/sec. AFter processing first 37Mb at such an amasing speed, one of old HDDs fails. I properly shutdown PC and disconnected failed drive. After bootup it appeared it recreated intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlocks, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lost my data again? Any suggestions how can I make it work? OS is Ubuntu Server 10.04.2... PS. Needless to say that data is unaccessible - I cannot mount /dev/md0 as save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it.

Read the article

Log Debug Messages without Debug Serial on Shipped Device

- by Kate Moss' Open Space

Debug message is one of the ancient but useful way for problem resolving. Message is redirected to PB if KITL is enabled otherwise it goes to default debug port, usually a serial port on most of the platform but it really depends on how OEMWriteDebugString and OEMWriteDebugByte are implemented. For many reasons, we don't want to have a debug serial port, for example, we don't have enough spare serial ports and it can affect the performance. So some of the BSP designers decide to dump the messages into other media, could be a log file, shared memory or any solution that is suitable for the need. In CE 5.0 and previous, OAL and Kernel are linked into one binaries; in the other word, you can use whatever function in kernel, such as SC_CreateFileW to access filesystem in OAL, even this is strongly not recommended. But since the OAL is being a standalone executable in CE 6.0, we no longer can use this back door but only interface exported in NKGlobal which just provides enough for OAL but no more. Accessing filesystem or using sync object to communicate to other drivers or application is even not an option. Sounds like the kernel lock itself up; of course, OAL is in kernel space, you can still do whatever you want to hack into kernel, but once again, it is not only make it a dirty solution but also fragile. So isn't there an elegant solution? Let's see how a debug message print out. In private\winceos\COREOS\nk\kernel\printf.c, the OutputDebugStringW is the one for pumping out the messages; most of the code is for error handling and serialization but what really interesting is the following code piece if (g_cInterruptsOff) { OEMWriteDebugString ((unsigned short *)str); } else { g_pNKGlobal->pfnWriteDebugString ((unsigned short *)str); } CELOG_OutputDebugString(dwActvProcId, dwCurThId, str); It outputs the message to default debug output (is redirected to KITL when available) or OAL when needed but note that highlight part, it also invokes CELOG_OutputDebugString. Follow the thread to private\winceos\COREOS\nk\logger\CeLogInstrumentation.c, this function dump whatever input to CELOG. So whatever the debug message is we always got a clone in CELOG. General speaking, all of the debug message is logged to CELOG already, so what you need to do is using celogflush.exe with CELZONE_DEBUG zone, and then viewing the data using the by Readlog tool. Here are some information about these tools CELOG - http://msdn.microsoft.com/en-us/library/ee479818.aspx READLOG - http://msdn.microsoft.com/en-us/library/ee481220.aspx Also for advanced reader, I encourage you to dig into private\winceos\COREOS\nk\celog\celogdll, the source of CELOG.DLL and use it as a starting point to create a more lightweight debug message logger for your own device!

Read the article

Getting away from a customized Magento 1.4 installation - Magento 1.6, OpenCart, or others?

- by Phil

I'm dealing with a Magento 1.4.0.0 Community Edition installation with various undocumented changes to the core (mostly integration with an ERP system), an outdated Sweet Tooth Points & Rewards module and some custom payment providers. It also doubles as a mediocre blogging/CMS system. It has one store each for 3 different languages, with about 40 product categories for a few hundred products. [rant] With no prior experience with any PHP e-commerce systems, I find it very difficult to work with. I attempted to install Magento 1.4.0.0 on my local WAMP dev machine, it installs fine, but the main page or search do not show any products no matter what I do in the backend admin panel. I don't know what's wrong with it, and whatever information I googled is either too old or too new from Magento 1.4. Later I'm given FTP access to the testing server, which neither my manager or I have permission to install XDebug on, as apparantly it runs on the same server as the production server (yikes). Trying to learn how Magento works is torture. I spent a week trying to add some fields into the Onepage Checkout before giving up and went to work on something else. The template system, just like the rest of Magento, is a bloated mishmash of overcomplicated directory structures, weird config xml files and EAV databases. I went into 6 different models and several content blocks in the backend just to change what the front page looks like. With little-to-none helpful and clear documentation (unlike CodeIgniter) and various breaking changes between minor point revisions which makes it hard to find useful information, Magento 1.4 is a developer killer. [/rant] The client is planning to redesign the site and has decided it might as well as move on from this unsustainable, hacky, upgrade-unfriendly, developer-unfriendly mess. Magento 1.4 is starting to show its age, with Magento 1.7 coming soon, the client is considering upgrading to Magento 1.6 or 1.7 if it has improved from 1.4. The customizations done to the current Magento 1.4 installation will have to be redone, and a new license for the Sweet Tooth Points & Rewards module will have to be bought. The client is also open to other e-commerce systems. I've looked at OpenCart and it seems to be quite developer friendly with a fairly simple structure. I found some complaints regarding its performance when the shop has thousands of categories or products, but this is not an issue with the current number of products my client has. It seems to be solid ground for easy customization to bring the rewards system and ERP integration over. What should the client upgrade to in this case?

Read the article

SQL Server MVP Deep Dives 2. The Awesome Returns.

- by Mladen Prajdic

Two years ago 59 SQL Server MVP's came together and helped make one of the best book on SQL Server out there. Each chapter was written by an MVP about a part of SQL Server they loved working with. This resulted in superb quality content and excellent ratings from the readers. To top it off all earnings went to a good cause, the War Child International organization. That book was SQL Server MVP Deep Dives. This year 63 SQL Server MVPs, me included, decided it was time do repeat the success of the first book. Let me introduce you the: SQL Server MVP Deep Dives 2 The topics in 60 chapters are grouped in 5 groups: Architecture, Database Administration, Database Development, Performance Tuning and Optimization, Business Intelligence. They represent over 1000 years of daily experience in various areas of SQL Server. I have contributed chapter 28 in Database Development group titled Getting asynchronous with Service Broker. In it I show you the Service Broker template you can use for secure communication between two or more SQL server instances for whatever purpose you may have. If you haven't heard of Service Broker it's a part of the database engine that enables you to do completely async operations in the database itself or between databases and instances. The official release of the book will be next week at PASS where there will be 2 slots where most of the authors will be there signing the books you bring. This is also a great opportunity to meet everyone and ask about any problems you may have. So definitely come say hi. Again we decided on a charity that will be supported by this book. It's called Operation Smile. They provide free surgeries to repair cleft lip, cleft palate and other facial deformities for children around the globe. You can also help them by donating. You can preorder it on at Manning Publications website or on Amazon. By having it you not only get to learn a lot, improve your skills and have fun but you also help a child have a normal life. If that's not a good cause then I don't know what it is.

Read the article

SQL SERVER – A Brief Note on SET TEXTSIZE

- by pinaldave

Here is a small conversation I received. I thought though an old topic, indeed a thought provoking for the moment. Question: Is there any difference between LEFT function and SET TEXTSIZE? I really like this small but interesting question. The question does not specify the difference between usage or performance. Anyway we will quickly take a look at how TEXTSIZE works. You can run the following script to see how LEFT and SET TEXTSIZE works. USE TempDB GO -- Create TestTable CREATE TABLE MyTable (ID INT, MyText VARCHAR(MAX)) GO INSERT MyTable (ID, MyText) VALUES(1, REPLICATE('1234567890', 100)) GO -- Select Data SELECT ID, MyText FROM MyTable GO -- Using Left SELECT ID, LEFT(MyText, 10) MyText FROM MyTable GO -- Set TextSize SET TEXTSIZE 10; SELECT ID, MyText FROM MyTable; SET TEXTSIZE 2147483647 GO -- Clean up DROP TABLE MyTable GO Now let us see the usage result which we receive from both of the example. If you are going to ask what you should do – I really do not know. I can tell you where I will use either of the same. LEFT seems to be easy to use but again if you like to do extra work related to SET TEXTSIZE go for it. Here is how I will use SET TEXTSIZE. If I am selecting data from in my SSMS for testing or any other non production related work from a large table which has lots of columns with varchar data, I will consider using this statement to reduce the amount of the data which is retrieved in the result set. In simple word, for testing purpose I will use it. On the production server, there should be a specific reason to use the same. Here is my candid opinion – I do not think they can be directly comparable even though both of them give the exact same result. LEFT is applicable only on the column of a single SELECT statement. where it is used but it SET TEXTSIZE applies to all the columns in the SELECT and follow up SELECT statements till the SET TEXTSIZE is not modified again in the session. Uncomparable! I hope this sample example gives you idea how to use SET TEXTSIZE in your daily use. I would like to know your opinion about how and when do you use this feature. Please leave a comment. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

How do I calculate the boundary of the game window after transforming the view?

- by Cypher

My Camera class handles zoom, rotation, and of course panning. It's invoked through SpriteBatch.Begin, like so many other XNA 2D camera classes. It calculates the view Matrix like so: public Matrix GetViewMatrix() { return Matrix.Identity * Matrix.CreateTranslation(new Vector3(-this.Spatial.Position, 0.0f)) * Matrix.CreateTranslation(-( this.viewport.Width / 2 ), -( this.viewport.Height / 2 ), 0.0f) * Matrix.CreateRotationZ(this.Rotation) * Matrix.CreateScale(this.Scale, this.Scale, 1.0f) * Matrix.CreateTranslation(this.viewport.Width * 0.5f, this.viewport.Height * 0.5f, 0.0f); } I was having a minor issue with performance, which after doing some profiling, led me to apply a culling feature to my rendering system. It used to, before I implemented the camera's zoom feature, simply grab the camera's boundaries and cull any game objects that did not intersect with the camera. However, after giving the camera the ability to zoom, that no longer works. The reason why is visible in the screenshot below. The navy blue rectangle represents the camera's boundaries when zoomed out all the way (Camera.Scale = 0.5f). So, when zoomed out, game objects are culled before they reach the boundaries of the window. The camera's width and height are determined by the Viewport properties of the same name (maybe this is my mistake? I wasn't expecting the camera to "resize" like this). What I'm trying to calculate is a Rectangle that defines the boundaries of the screen, as indicated by my awesome blue arrows, even after the camera is rotated, scaled, or panned. Here is how I've more recently found out how not to do it: public Rectangle CullingRegion { get { Rectangle region = Rectangle.Empty; Vector2 size = this.Spatial.Size; size *= 1 / this.Scale; Vector2 position = this.Spatial.Position; position = Vector2.Transform(position, this.Inverse); region.X = (int)position.X; region.Y = (int)position.Y; region.Width = (int)size.X; region.Height = (int)size.Y; return region; } } It seems to calculate the right size, but when I render this region, it moves around which will obviously cause problems. It needs to be "static", so to speak. It's also obscenely slow, which causes more of a problem than it solves. What am I missing?

Read the article

Organizing Git repositories with common nested sub-modules

- by André Caron

I'm a big fan of Git sub-modules. I like to be able to track a dependency along with its version, so that you can roll-back to a previous version of your project and have the corresponding version of the dependency to build safely and cleanly. Moreover, it's easier to release our libraries as open source projects as the history for libraries is separate from that of the applications that depend on them (and which are not going to be open sourced). I'm setting up workflow for multiple projects at work, and I was wondering how it would be if we took this approach a bit of an extreme instead of having a single monolithic project. I quickly realized there is a potential can of worms in really using sub-modules. Supposing a pair of applications: studio and player, and dependent libraries core, graph and network, where dependencies are as follows: core is standalone graph depends on core (sub-module at ./libs/core) network depdends on core (sub-module at ./libs/core) studio depends on graph and network (sub-modules at ./libs/graph and ./libs/network) player depends on graph and network (sub-modules at ./libs/graph and ./libs/network) Suppose that we're using CMake and that each of these projects has unit tests and all the works. Each project (including studio and player) must be able to be compiled standalone to perform code metrics, unit testing, etc. The thing is, a recursive git submodule fetch, then you get the following directory structure: studio/ studio/libs/ (sub-module depth: 1) studio/libs/graph/ studio/libs/graph/libs/ (sub-module depth: 2) studio/libs/graph/libs/core/ studio/libs/network/ studio/libs/network/libs/ (sub-module depth: 2) studio/libs/network/libs/core/ Notice that core is cloned twice in the studio project. Aside from this wasting disk space, I have a build system problem because I'm building core twice and I potentially get two different versions of core. Question How do I organize sub-modules so that I get the versioned dependency and standalone build without getting multiple copies of common nested sub-modules? Possible solution If the the library dependency is somewhat of a suggestion (i.e. in a "known to work with version X" or "only version X is officially supported" fashion) and potential dependent applications or libraries are responsible for building with whatever version they like, then I could imagine the following scenario: Have the build system for graph and network tell them where to find core (e.g. via a compiler include path). Define two build targets, "standalone" and "dependency", where "standalone" is based on "dependency" and adds the include path to point to the local core sub-module. Introduce an extra dependency: studio on core. Then, studio builds core, sets the include path to its own copy of the core sub-module, then builds graph and network in "dependency" mode. The resulting folder structure looks like: studio/ studio/libs/ (sub-module depth: 1) studio/libs/core/ studio/libs/graph/ studio/libs/graph/libs/ (empty folder, sub-modules not fetched) studio/libs/network/ studio/libs/network/libs/ (empty folder, sub-modules not fetched) However, this requires some build system magic (I'm pretty confident this can be done with CMake) and a bit of manual work on the part of version updates (updating graph might also require updating core and network to get a compatible version of core in all projects). Any thoughts on this?

Read the article

Five things SSIS should drop

- by jamiet

There’s a current SQL Server meme going round entitled Five things SQL Server should drop and, whilst no-one tagged me to write anything, I couldn’t resist doing the same for SQL Server Integration Services. So, without further ado, here are five things that I think should be dropped from SSIS.Data source connectionsSeriously, does anyone use these? I know why they’re there. Someone sat in a meeting back in the early part of the last decade and said “Ooo, Reporting Services and Analysis Services have these things called Data Sources. If we used them in Integration Services then we’d have a really cool integration story.” Errr….no.Web Service TaskDitto. If you want to do anything useful against anything but the simplest of SOAP web services steer well clear of this peculiar SSIS additionActiveX Script TaskAnother task that I suspect has never seen the light of day in a SSIS package. It was billed as a way of running upgraded DTS2000 ActiveX scripts in SSIS – sounds good except for one thing. Anytime one of those scripts would try to talk to the DTS object model (which they all do – otherwise what’s the point) then they will error out. This one has always been a real head scratcher.Slow Changing Dimension wizardI suspect I may get some push back on this one but I’m mentioning it anyway. Some people like the SCD wizard; I am not one of those people! Everything that the SCD component does can easily be reproduced using other components and from a performance point of view its much more beneficial to use those alternatives.Multifile Connection ManagerImagining buying a house that came with a set of keys that didn’t open any of the doors. Sounds ridiculous right? How about a SSIS Connection Manager that doesn’t get used by any of the tasks or components. Ah, that’ll be the Multifile Connection Manager then!Comments are of course welcome. Diatribes are assumed :)@Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

PCF shadow shader math causing artifacts

- by user2971069

For a while now I used PCSS for my shadow technique of choice until I discovered a type of percentage closer filtering. This method creates really smooth shadows and with hopes of improving performance, with only a fraction of texture samples, I tried to implement PCF into my shader. This is the relevant code: float c0, c1, c2, c3; float f = blurFactor; float2 coord = ProjectedTexCoords; if (receiverDistance - tex2D(lightSampler, coord + float2(0, 0)).x > 0.0007) c0 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(f, 0)).x > 0.0007) c1 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(0, f)).x > 0.0007) c2 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(f, f)).x > 0.0007) c3 = 1; coord = (coord % f) / f; return 1 - (c0 * (1 - coord.x) * (1 - coord.y) + c1 * coord.x * (1 - coord.y) + c2 * (1 - coord.x) * coord.y + c3 * coord.x * coord.y); This is a very basic implementation. blurFactor is initialized with 1 / LightTextureSize. So the if statements fetch the occlusion values for the four adjacent texels. I now want to weight each value based on the actual position of the texture coordinate. If it's near the bottom-right pixel, that occlusion value should be preferred. The weighting itself is done with a simple bilinear interpolation function, however this function takes a 2d vector in the range [0..1] so I have to convert my texture coordinate to get the distance from my first pixel to the second one in range [0..1]. For that I used the mod operator to get it into [0..f] range and then divided by f. This code makes sense to me, and for specific blurFactors it works, producing really smooth one pixel wide shadows, but not for all blurFactors. Initially blurFactor is (1 / LightTextureSize) to sample the 4 adjacent texels. I now want to increase the blurFactor by factor x to get a smooth interpolation across maybe 4 or so pixels. But that is when weird artifacts show up. Here is an image: Using a 1x on blurFactor produces a good result, 0.5 is as expected not so smooth. 2x however doesn't work at all. I found that only a factor of 1/2^n produces an good result, every other factor produces artifacts. I'm pretty sure the error lies here: coord = (coord % f) / f; Maybe the modulo is not calculated correctly? I have no idea how to fix that. Is it even possible for pixel that are further than 1 pixel away?

Read the article

Is there a better term than "smoothness" or "granularity" to describe this language feature?

- by Chris

One of the best things about programming is the abundance of different languages. There are general purpose languages like C++ and Java, as well as little languages like XSLT and AWK. When comparing languages, people often use things like speed, power, expressiveness, and portability as the important distinguishing features. There is one characteristic of languages I consider to be important that, so far, I haven't heard [or been able to come up with] a good term for: how well a language scales from writing tiny programs to writing huge programs. Some languages make it easy and painless to write programs that only require a few lines of code, e.g. task automation. But those languages often don't have enough power to solve large problems, e.g. GUI programming. Conversely, languages that are powerful enough for big problems often require far too much overhead for small problems. This characteristic is important because problems that look small at first frequently grow in scope in unexpected ways. If a programmer chooses a language appropriate only for small tasks, scope changes can require rewriting code from scratch in a new language. And if the programmer chooses a language with lots of overhead and friction to solve a problem that stays small, it will be harder for other people to use and understand than necessary. Rewriting code that works fine is the single most wasteful thing a programmer can do with their time, but using a bazooka to kill a mosquito instead of a flyswatter isn't good either. Here are some of the ways this characteristic presents itself. Can be used interactively - there is some environment where programmers can enter commands one by one Requires no more than one file - neither project files nor makefiles are required for running in batch mode Can easily split code across multiple files - files can refeence each other, or there is some support for modules Has good support for data structures - supports structures like arrays, lists, and especially classes Supports a wide variety of features - features like networking, serialization, XML, and database connectivity are supported by standard libraries Here's my take on how C#, Python, and shell scripting measure up. Python scores highest. Feature C# Python shell scripting --------------- --------- --------- --------------- Interactive poor strong strong One file poor strong strong Multiple files strong strong moderate Data structures strong strong poor Features strong strong strong Is there a term that captures this idea? If not, what term should I use? Here are some candidates. Scalability - already used to decribe language performance, so it's not a good idea to overload it in the context of language syntax Granularity - expresses the idea of being good just for big tasks versus being good for big and small tasks, but doesn't express anything about data structures Smoothness - expresses the idea of low friction, but doesn't express anything about strength of data structures or features Note: Some of these properties are more correctly described as belonging to a compiler or IDE than the language itself. Please consider these tools collectively as the language environment. My question is about how easy or difficult languages are to use, which depends on the environment as well as the language.

Read the article

Desktop Fun: Runic Style Fonts

- by Asian Angel

Most of the time regular fonts are just what you need for documents, invitations, or adding text to images. But what if you are in the mood for something unusual or unique to add that perfect touch? If you like older runic style writing, then enjoy finding some new favorites for your collection with our Runic Style Fonts collection. Temple photo by ShinyShiny. Note: To manage the fonts on your Windows 7, Vista, & XP systems see our article here. The Runic Style Fonts Sable Download Worn Manuscript Download JSL Ancient Download Antropos Download Cave Gyrl Download The Roman Runes Alliance Download Ancient Geek Download Troll Download Runish Quill MK *includes two font types Download DS RUNEnglish 2 Download Runes Written *includes two font types Download Wolves And Ravens Download Art Greco Download Dalek Download Glagolitic AOE Download Linear B Download Cartouche Download Greywolf Glyphs *includes 62 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Note: This group represents the numbers 0 – 9. Download Africain *includes 62 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Note: This group represents the numbers 0 – 9. Download Cave Writings *includes 52 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Download For more great ways to customize your computer be certain to look through our Desktop Fun section. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Five Sleek Audi R8 Car Themes for Chrome and Iron MS Notepad Replacement Metapad Returns with a New Beta Version Spybot Search and Destroy Now Available as a Portable App (PortableApps.com) ShapeShifter: What Are Dreams? [Video] This Computer Runs on Geek Power Wallpaper Bones, Clocks, and Counters; A Look at the First 35,000 Years of Computing

Read the article

SQL SERVER – Free eBook Download – EPUB, MOBI, PDF Format

- by pinaldave

Microsoft has released recently free eBooks on various Microsoft Technology. The best part is that all these books are available in ePub, Mobi and PDF. You can download them to your local machine or eBook reader and read them. This is a great start as many important subjects are now covered and converted into an eBook. I personally read through a few of the books and found they are very comprehensive and and detailed. The goal is not to cover complete technology in a single book but rather pick a single topic and discuss it in detail. The source of the book is white paper, Technet wiki as well book online and it is clearly listed right bellow the book title. Following are the books available for SQL Server Technology and I encourage all of you to have a look at them as they are great resources. Master Data Services Capacity Guidelines Microsoft SQL Server AlwaysOn Solutions Guide for High Availability and Disaster Recovery Microsoft SQL Server Analysis Services Multidimensional Performance and Operations Guide QuickStart: Learn DAX Basics in 30 Minutes SQL Server 2012 Transact-SQL DML Reference You can download above eBooks from here. This is indeed a great attempt as each book talks about the a single subject in depth keeping author focus on the single and simple subject. I have previously written two books by focusing on the same subject and I had great pleasure writing it as well. Writing on focus subjects gives complete freedom to author to explore the a single subject without having burden to cover everything which is associated with that technology at large. Just like eBooks mentioned earlier my SQL Server Wait Stats was inspired from my article series on SQL Wait Stats. The latest book SQL Server Interview Question and Answers was derived from my article series on SQL Interview Q and A. Writing book is an absolutely different concept than writing blog posts. When I was converting my blog posts to books, I ended up writing 50% new material and end up removing many repetitive content which shows up in blog series. It was indeed fun to focused book at the same time it was a great learning experience as an individual. Reference: TechNet Wiki, Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Ubuntu on Pandaboard giving me troubles

- by Jeroen Jacobs

I'm trying to install the OMAP4 extras for ubuntu on my pandaboard. For some reason, a few packages can't seem to be agree with eachother. This what I did so far: installed on Ubuntu 11.10 on sd card Powered on Pandaboard and let it finish it's initial install Did an "apt-get update" and "apt-get upgrade", to install updates So far, everything went fine, and I was quite happy with my Pandaboard, but then I made the mistake of typing this: apt-get install ubuntu-imap4-extras At first, everything seemed ok, and it started downloading and installing. But then after a while it just crashed. I tried it again but then it gave me this: Reading package lists... Done Building dependency tree Reading state information... Done ubuntu-omap4-extras is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: gstreamer0.10-openmax : Depends: gstreamer0.10-plugins-bad but it is not going to be installed gstreamer0.10-plugin-ducati : Depends: gstreamer0.10-plugins-bad but it is not going to be installed ubuntu-omap4-extras-multimedia : Depends: gstreamer0.10-plugins-bad (>= 0.10.22-2ubuntu4+ti1.5) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). So I tried to the suggestion: apt-get -f install: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: gstreamer0.10-plugins-bad The following NEW packages will be installed: gstreamer0.10-plugins-bad 0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded. 88 not fully installed or removed. Need to get 0 B/1,794 kB of archives. After this operation, 4,571 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 143575 files and directories currently installed.) Unpacking gstreamer0.10-plugins-bad (from .../gstreamer0.10-plugins bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb) ... dpkg: error processing /var/cache/apt/archives/gstreamer0.10-plugins-bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb (--unpack): trying to overwrite '/usr/lib/libgstbasecamerabinsrc-0.10.so.0.0.0', which is also in package gstreamer0.10-plugins-good 0.10.30-1ubuntu7.1 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/gstreamer0.10-plugins-bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Seems like two packages (plugins-good and plugins-bad) are fighting over the same library. Any idea on how to fix this??

Read the article

Desktop Fun: Vacation and Travel Icon Packs

- by Asian Angel

Do you have an upcoming vacation, place that you would like to travel to, or a favorite destination that you have visited in the past? With an appropriate wallpaper you can help set the mood for your desktop with our Vacation and Travel Icon Packs collection. Note: To customize the icon setup on your Windows 7 & Vista systems see our article here. Using Windows XP? We have you covered here. Sneak Preview After seeing “Tiki Time! 1.0” set shown below we just could not resist putting together a nice sunset beach desktop as an example to share with you. That is definitely so relaxing to look at… Note: Wallpaper can be found here. Looking very nice close up… At the Beach *.ico format only Download Sea Shells *.ico format only Download Beach Icon Collection *.ico and .png format Download Tiki Time! 1.0 *.ico format only Download Underwater Icons *.ico format only Download Shutter Shades Icon Pack *.ico and .png format Download Life Saver *.ico format only Download Les 12 Maisons *.ico format only Download Back In Time *.ico format only Download Tourism *.ico and .png format Download The Lovely Bones *.ico format only Download Japanicons Pack *.ico and .png format, also has bonus wallpaper included! Here is what the included 1280*1024 wallpaper looks like. Download Ukrainian Motifs *.ico format only Download Las Vegas Icons *.ico format only Download Las Vegas 2 *.ico format only Download Be sure to visit our new Desktop Fun section for more customization goodness! Similar Articles Productive Geek Tips Desktop Fun: Video Game Icon PacksDesktop Fun: Sci-Fi Icons Packs Series 2Restore Missing Desktop Icons in Windows 7 or VistaAdd Home Directory Icon to the Desktop in Windows 7 or VistaQuick Help: Downloadable Show Desktop Icon for XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows

Read the article

Ubuntu Dual Screen Using Virtual Machine - AMD GPU

- by Chris

I've been searching online and reading tutorials and etc about how to make my ubuntu VM dual screen(x86_64). I have first tried to run these commands: sudo aticonfig --initial -f which gave me the ouput of: sudo: aitconfig: command not found I then googled the output and followed these instructions that I tells me to install my ATI drivers onto my ubuntu. wget http://www2.ati.com/drivers/linux/ati-driver-installer-11-5-x86.x86_64.run sudo sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty sudo dpkg -i *.deb sudo apt-get -f install sudo aticonfig -f --initial --adapter=all sudo reboot It all works well until I input sudo apt-get -f install which gives me the following output: sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 25 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up fglrx (2:8.850-0ubuntu1) ... update-alternatives: error: alternative link /usr/bin/aticonfig is already managed by x86_64-linux-gnu_gl_conf. dpkg: error processing fglrx (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: fglrx fglrx-amdcccle fglrx-dev E: Sub-process /usr/bin/dpkg returned an error code (1) At this point, I don't know what to do since running: gksudo amdcccle For the record, I have 3D acceleration turned on. The following is my GPU for my VM lspci | grep VGA 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter Any Help on how I can make my VM dual screen with Ubuntu would be great. Thank you in advance.

Read the article

Happy New Year! Upcoming Events in January 2011

- by mandy.ho

Oracle Database kicks off the New Year at the following events during the month of January. Hope to see you there and please send in your pictures and feedback! Jan 20, 2011 - San Francisco, CA LinkShare Symposium West 2011 Oracle is a proud Gold Sponsor at the LinkShare Symposium West 2011 January 20 in San Francisco, California. Year after year LinkShare has been bringing their network the opportunity to come to life. At the LinkShare Symposium online performance marketing leaders meet to optimize face-to-face during a full day of networking. Learn more by attending Oracle Breakout Session, "Omni - Channel Retailing, What is possible now?" on Thursday, January 20, 11:15 a.m. - 12:00 noon, Grand Ballroom. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=128306&src=6954634&src=6954634&Act=397 Jan 24, 2011 - Cincinnati, OH Greater Cincinnati Oracle User Group Meeting "Tom Kyte Day" - Featuring a day of sessions presented by Senior Technical Architect, Tom Kyte. Sessions include "Top 10, no 11, new features of Oracle Database 11g Release 2" and "What do I really need to know when upgrading", plus more. http://www.gcoug.org/ Jan 25, 2011 - Vancouver, British Columbia Oracle Security Solutions Forum Featuring a Special Keynote Presentation from Tom Kyte - Complete Database Security Join us at this half-day event; Oracle Database Security Solutions: Complete Information Security. Learn how Oracle Database Security solutions help you: • Prevent external threats like SQL injection attacks from reaching your databases • Transparently encrypt application data without application changes • Prevent privileged database users and administrators from accessing data • Use native database auditing to monitor and report on database activity • Mask production data for safe use in nonproduction environments http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=126974&src=6958351&src=6958351&Act=97 Jan 26, 2011 - Halifax, Nova Scotia Oracle Database Security Technology Day Exclusive Seminar on Complete Information Security with Oracle Database 11g The amount of digital data within organizations is growing at unprecedented rates, as is the value of that data and the challenges of safeguarding it. Yet most IT security programs fail to address database security--specifically, insecure applications and privileged users. So how can you protect your mission-critical information? Avoid risky third-party solutions? Defend against security breaches and compliance violations? And resist costly new infrastructure investments? Join us at this half-day seminar, Oracle Database Security Solutions: Complete Information Security, to find out http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=126269&src=6958351&src=6958351&Act=93

Read the article

CAPTCHA blocking for my scraping script?

- by Surabhil Sergy

I am working on a scraping project which involves getting web data and parsing them for further use. I have been working using PHP and CURL to make scraping scripts which crawls web data and I make use of either PHP Dom or Simple HTML DOM Parser library for these kinds of projects. On a recent project I encountered some challenges; initially I found the target website blocked my server IP such that the server could not make any successful requests to the site. Understanding these issues as common I bought a set of private proxies and tried to make request calls using them. Though this could get successful response, I noticed the script is getting some kind of blocks after 2-3 continuous requests. On printing and checking the response I could see a pop-up asking for CAPTCHA validation. I could not see any captcha characters to be entered and it also shows an error “input error: invalid referrer”. On examining the source I could see some Google recaptcha scripts within. I’m stuck at this point and I m not able to execute my script. My script is used for gathering data and it needs to go through a large number of pages periodically over the site. But in the current scenario I am not able to proceed with my script. I could see there are some options to overcome these captcha issues and scraping these kinds of sites too are common. I have been checking my script performance and responses over last two months. I could see during first month I was able to execute very large number of requests from a single IP and I was able to get results. Later I get an IP block and used private proxies which could get me some results. Later I am facing now with the captcha trouble. I would appreciate any help or suggestions in this regard. (Often in this kind of questions I used to get a first comment as, ‘Have you asked for prior permission from the target?’ .I haven’t ,but I know there are many sites doing so to get the details out of sites and target sites may not often give access to them. I respect the legality and scraping etiquettes but I would like to know at what point I stuck and how could I overcome that! ) I could provide any supporting information if needed.

Read the article

OBIA on Teradata - Part 2 Teradata DB Utilization for ETL

- by Mohan Ramanuja

Techniques to Monitor Queries and ETL Load CPU and Disk I/OSelect username, processor, sum(cputime), sum(diskio) from dbc.ampusage where processor ='1-0' order by 2,3 descgroup by 1,2;UserName Vproc Sum(CpuTime) Sum(DiskIO)AC00916 10 6.71 24975 List Hardware ErrorsThere is a possibility that the system might have adequate disk space but out of free cylinders. In order to monitor hardware errors, the following query was used:Select * from dbc.Software_Event_Log where Text like '%restart%' order by thedate, thetime;For active users, usage of CPU and analysis of bad CPU to I/O ratiosSelect * from DBC.AMPUSAGE where username='CRMSTGC_DEV_ID'; AND SUBSTR(ACCOUNTNAME,6,3)='006'; Usage By I/OSelect AccountName, UserName, sum(CpuTime), sum(DiskIO) from DBC.AMPUSAGE group by AccountName, UserName Order by Sum(DiskIO) desc; AccountName UserName Sum(CpuTime) Sum(DiskIO)$M1$10062209 AB89487 374628.612 7821847$M1$10062210 AB89487 186692.244 2799412$M1$10062213 COC_ETL_ID 119531.068 331100426$M1$10062200 AB63472 118973.316 109881984$M1$10062204 AB63472 110825.356 94666986$M1$10062201 AB63472 110797.976 75016994$M1$10062202 AC06936 100924.448 407839702$M1$10062204 AB67963 0 4$M1$10062207 AB91990 0 2$M1$10062208 AB63461 0 24$M1$10062211 AB84332 0 6$M1$10062214 AB65484 0 8$M1$10062205 AB77529 0 58$M1$10062210 AC04768 0 36$M1$10062206 AB54940 0 22 Usage By CPUSelect AccountName, UserName, sum(CpuTime), sum(DiskIO) from DBC.AMPUSAGE group by AccountName, UserName Order by Sum(CpuTime) desc;AccountName UserName Sum(CpuTime) Sum(DiskIO)$M1$10062209 AB89487 374628.612 7821847$M1$10062210 AB89487 186692.244 2799412$M1$10062213 COC_ETL_ID 119531.068 331100426$M1$10062200 AB63472 118973.316 109881984$M1$10062204 AB63472 110825.356 94666986$M1$10062201 AB63472 110797.976 75016994$M2$100622105813004760047LOAD T23_ETLPROC_ENT 0 6$M1$10062215 AA37720 0 180$M1$10062209 AB81670 0 6Select count(distinct vproc) from dbc.ampusage;432select * from dbc.dbcinfo;AccountName UserName CpuTime DiskIO CpuTimeNorm Vproc VprocType Model$M1$10062205 CRM_STGC_DEV_ID 0.32 1764 12.7423999023438 0 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.28 1730 11.1495999145508 3 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.304 1736 12.1052799072266 4 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.248 1731 9.87535992431641 7 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.332 1731 13.2202398986816 8 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.284 1712 11.3088799133301 11 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.24 1757 9.55679992675781 12 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.292 1737 11.6274399108887 15 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.268 1753 10.6717599182129 16 AMP 2580$M1$10062205 CRM_STGC_DEV_ID 0.276 1732 10.9903199157715 19 AMP 2580select * from dbc.dbcinfo;InfoKey InfoDataLANGUAGE SUPPORT MODE StandardRELEASE 12.00.03.03VERSION 12.00.03.01a

Read the article

Selectively Exposing Functionallity in .Net

- by David V. Corbin

Any developer should be aware of the principles of encapsulation, cross-tier isolation, and cross-functional separation of concerns. However, it seems the few take the time to consider the adage of "minimal yet complete"1 when developing the software. Consider the exposure of "business objects" to the user interface. Some common situations occur: Accessing a given element requires a compound set of calls that do not "make sense" to the User Interface. More information than absolutely required is exposed to the user interface It would be much cleaner if a custom interface was provided that exposed exactly (and only) the information that is required by the consumer. Achieving this using conventional techniques would require the creation (and maintenance!) of custom classes to filter and transpose the information into the ideal format. Determining the ROI on this approach can be very difficult to ascertain, and as a result it is often ignored completely. There is another approach, which is largely made practical by virtual of the Action and Func delegates. From a callers point of view, the following two samples can be used interchangeably: interface ISomeInterface { void SampleMethod1(string param); string SamepleMethod2(string param); } class ISomeInterface { public Action<string> SampleMethod1 {get; } public Func<string,string> SamepleMethod2 {get; } } The capabilities this simple changes enable are significant (and remember it does not cange the syntax at the call site): The delegates can be initialized to directly call the proper method of any target class. The delegates can be dynamically updated based on the current state. The "interface" can NOT be cast to the concrete class (which often exposes more functionallity). This patterns By limiting the interface to the exact functionallity required, the reduced surface area will typically result in lower development, testing and maintenance costs. We are currently in the process of posting a project on CodePlex which illustrates this (and many other) techniques which have proven helpful in creating robust yet flexible solutions that are highly efficient2 and maintainable. This post will be updated as soon as the project is published. 1) Credit: Scott Meyers, Effective C++, Addison-Wesley 1992 2) For those who read my previous post on performance it should be noted that the use of delegates is on the same order of magnitude (actually a tiny amount faster) as conventional interfaces.

Read the article

Career Advice: finding challenging work in software and web development

- by dianovich

Having left my physics degree early, I started out in the realm of web design / front end web development and was able to get work quite quickly. I moved on to spend a chunk of my time on servers and gained experience with frameworks like Wordpress and Drupal, then the likes of Codeigniter and CakePHP and became comfortable in Debian-based and RHEL/CentOS environments. I ventured in to iOS development and published a couple of native apps to the app store too! I have started to spend a good deal of my time writing Python and have invested a little time in Django. The problem is, I still spend a fair chunk of my time doing more front end web development (writing markup and CSS for site themes, design-lead JavaScript, small applications for which application architecture and software engineering are relatively unimportant or too time consuming to invest in) in my job. What I want to do is really exercise the systematic/logical portion of my brain and tackle challenging problems on a daily basis. I want to have to care about big-oh running times, modularity in software, DRY, performance tuning and development methodologies. I want to work for a firm whose clients say: "Yes, these things are important to us and we'll pay you to get them right." But it is difficult: I have no formal training and am potentially becoming a jack of all trades. Not that being a jack of many trades is necessarily a bad thing, but the scope of work I find myself involved in is far too broad. And, there are only so many hours in a day outside of work! My question is: where do I go from here? I am starting to work on a few open source projects and have started to publish content to my blog. But this isn't likely to make it past the recruitment consultants and HR departments of many-a-firm. And I do not, for example, work in a team that practices agile methodologies, so how do I get work in such a team to gain experience? While I have been responsible for implementing version control and some solid working practices into our current environment, there is only so far I can go in this context. What would convince you that i'm worth taking a risk? What would convince you that i'll have caught up the other guys in your employ in next to no time?

Read the article

links for 2011-02-10

- by Bob Rhubart

Manish Devgan: Extending WebCenter Spaces Using JDeveloper In addition to being able to customize WebCenter Spaces using the browser-based tools, you can now also customize and “extend” WebCenter Spaces in many ways in JDeveloper. (tags: oracle enterprise2.0 webcenter jdeveloper) Oracle University: New Personalized Training Catalog "Searching for training classes just got easier with Oracle University's new Personalized Training Catalog. View upcoming course schedules for the topics that you select in your preferred locations. Browse courses when you need to or request your personalized catalog to be emailed to you." (tags: oracle oracleuniversity) René van Wijk: Hibernate and Coherence « Middleware Magic "A major justification for the claim that applications using an object/relational persistence layer are expected to outperform applications built using direct JDBC is the potential for caching." - René van Wijk (tags: oracle coherence middleware) Sten Vesterli on Fusion Applications: " It’s (almost) here!" Speaking of Fusion Applications, Oracle ACE Director Sten Vesterli says: "The usability revolution has finally caught up with enterprise applications; they will no longer be built based on the capabilities of the database, but on the needs of users." (tags: oracle otn oracleace fusionapplications) The Myth of Oracle Fusion | The ORACLE-BASE Blog "I can totally understand when people on the outside of our little goldfish bowl have a really bad and confused impression of anything containing the term “Fusion”, because it does have a very long and sordid history." Oracle ACE Director Tim Hall (tags: oracle otn oracleace fusionapplications) The Other Side of XBRL (Enterprise Performance Management Blog) With the United States SEC's mandate for XBRL filings entering its third year, and impacting over 7000 additional companies in 2011, there's a lot of buzz in the industry about how companies should address the new reporting requirements. (tags: oracle xbrl compliance) Database Vault integration available (The Shorten Spot) Anthony Shorten shares information on the Database Vault solution included in the Oracle Utilities Application Framework. (tags: oracle database) SOASuite 11.1.1.4 : Error Logging into BPM11g Composer? (Angelo Santagata's Blog) Angelo Santagata shares simple solutions to a few minor SOA Suite 11.1.1.4 issues. (tags: oracle soa soasuite bpm) Thierry Vergult: No electricity, but the application is up "Dakar is having more troubles then normal with electricity. Never thought that the SaaS model would be that useful when the light goes out. And the extra battery in the office dies, and the router goes down. But you still can access the application over your smartphone and finish your payroll run." (tags: oracle cloud saas)

Read the article

How to Deal with a Difficult Boss?

- by Anonymous

I have some problems with my boss, it's quite a long story :) About one year ago, I'm working as team leader of project X. Everything work fine until one of my fellow (staff) flame me that I have problem with ALL member in our team, that guy also flame me to other staff that I report them with a poor performance. My boss call me and blame me without ask a single question. I try to explain everything to my boss but she doesn't listen to me. One month later, we have a meeting. This is only team leader's meeting, my boss talk about this problem with other team leader. There are two person who have worked with this guy, they all say "This guy cannot trust". That guy had do same thing same problem with his former team leader. Finally, everything's clear and I think I gain some trust from her. I can say that I'm the best team leader in her hand, as only project that archive more than 120% profit. Then I move to new project, this is bigger project and I can manage it quite good. But I have a problem again. One of my staff always leave and does not follow our company rule, I call him to talk and tell him that you cannot do this because that's not allow in our company. He also changed working time record file of himself, then I call him to warn again. This time he ask me to move to another project so I go to talk to my boss. She come to my building when I'm not there (other staff call me) and talk with that guy (who have problem with me); I think she still not trust me. And AGAIN, she believe what that guy said and I got blamed. I want to know how can I deal with this kind of boss, or is it better to find a new job, or any other suggestion about this problem? Thank you :) Additional information: Even my job title is "Team Leader" but it's my responsibility to manage staff working time and their behavior. This responsible is my company's rule.

Read the article

"sr0" I/O read boot error in Xubuntu 12.10

- by Entropicurity

Just recently upgraded Xubuntu 12.10 after having installed 12.04 originally. Ever since that happened, any time I inserted a disk into my DVD/CD reader/writer I would end up getting a number of error messages from my DVD player/Audio player softer, typically with any of them either crashing or returning a GStreamer backend error. So doing some research I tried to mount it manually, and it typically returned the error messages you'll see below: (using the dmesg | grep "sr0" command) [17545.435584] end_request: I/O error, dev sr0, sector 0 [17545.492968] sr 3:0:0:0: >[sr0] [17545.492981] sr 3:0:0:0: >[sr0] [17545.492992] sr 3:0:0:0: >[sr0] [17545.493003] sr 3:0:0:0: >[sr0] CDB: [17545.493020] end_request: I/O error, dev sr0, sector 0 [17545.493058] EXT3-fs (sr0): error: unable to read superblock [17545.553224] sr 3:0:0:0: >[sr0] [17545.553237] sr 3:0:0:0: >[sr0] [17545.553247] sr 3:0:0:0: >[sr0] [17545.553258] sr 3:0:0:0: >[sr0] CDB: [17545.553275] end_request: I/O error, dev sr0, sector 0 [17545.553312] EXT4-fs (sr0): unable to read superblock [17545.611482] sr 3:0:0:0: >[sr0] [17545.611494] sr 3:0:0:0: >[sr0] [17545.611504] sr 3:0:0:0: >[sr0] [17545.611514] sr 3:0:0:0: >[sr0] CDB: [17545.611531] end_request: I/O error, dev sr0, sector 0 [17545.611568] FAT-fs (sr0): unable to read boot sector When I grepped this, the number of error messages just seemed to spill all over the screen, and typically all revolve around the I/O error. I then went into VLC and tried to run the stuff through there, but for some reason it won't read with the default devices. Instead I have to manually input sr0 into each of the /dev/ references and it will play just fine, until I exit out of the program, at which point I have to re-input everything. I have already installed all the media dependencies, both open source and restricted, through the software center. I just found this strange, as out of the box 12.04 there wasn't any problem what so ever. At this point, it could be that all my audio CD's are not in a format that is familiar with the OS (I've read in some places that EXTF4 has issues with this) but I don't see how that could be a problem when the above error messages even tested to see if it is EXT3 as well? I've tried my best to troubleshoot this up till now using existing topics, but it seems that this is a regular problem with a multitude of varying factors that incorporate into it, including but not limited to read/write problems with the format of the CD and right protection. Is there something integral that I am missing?

Read the article

Chargeback and showback...both a 'throw back'

- by llaszews

Been getting asked again by customers and partners about chargeback and showback in the cloud so thought I would blog on my response to this question. Charge Back background, information and industry analysis: Cloud computing is all about shared resources. These shared resources are computer servers (including memory and CPU), network devices, hard disk storage, database servers, application servers, cooling, floor space, electricity and more. These resources are shared by departments within a company, or by a number of companies, when resources are hosted in the public or hybrid cloud. Currently, hosting providers that run other companies on their cloud platforms do not have an accurate way to measure the shared computing resources used by a specific user let alone used by a specific customer. Additionally, companies running their own cloud data centers, for private or hybrid clouds, have no way of measure and charging back the departments in the company that are using these shared cloud resources. In both cases, the lack of determine shared resource costs and to charge them back to the company, department or user that is using this resources is limited a clear measure of business benefit and impacting company’s ability to measure the Return on Investment (ROI). An IT chargeback system is an accounting strategy that applies the costs of IT services, hardware or software to the business unit in which they are used. This system contrasts with traditional IT accounting models in which a centralized department bears all of the IT costs in an organization and those costs are treated simply as corporate overhead. Showback involves showing the IT costs to a department or customer but not actually charging them for their IT usage. Showback is a gradual method of introducing chargeback into an enterprise. Most companies implement a show back mechanism before a full chargeback system is put in place. Oracle chargeback product: Oracle Enterprise Manager provides tools for defining detailed Chargeback plans spanning different metrics collected for each type of resources as well as defining Cost Centers for grouping costs across multiple developers. Chargeback plans can use not only usage based costs, but also configuration based costs (e.g. version of the platform) or fixed costs (e.g. flat-rate management fee). Chargeback has rich out of the box reports. Trending reports show how charge and resource consumption varies over time, while Summary reports show the breakdown of charges or usage by different dimensions such as Cost Center or Target Type. These reports help consumers in understanding how their charges relate to their consumption and also assist the IT department with budgeting and planning activities. With BI Publisher, the reports can be made available in a variety of formats such as PDF, HTML, Word, Excel or PowerPoint.

Read the article

Using ext4 in VMware machine

First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

Search Results

Search found 20904 results on 837 pages for 'disk performance'.

Page 694/837 | < Previous Page | 690 691 692 693 694 695 696 697 698 699 700 701 | Next Page >

- by BarsMonster

- by Kate Moss' Open Space

- by Phil

- by Mladen Prajdic

- by pinaldave

- by Cypher

- by André Caron

- by jamiet

- by user2971069

- by Chris

- by Asian Angel

- by pinaldave

- by Jeroen Jacobs

- by Asian Angel

- by Chris

- by mandy.ho

- by Surabhil Sergy

- by Mohan Ramanuja

- by David V. Corbin

- by dianovich

- by Bob Rhubart

- by Anonymous

- by Entropicurity

- by llaszews

< Previous Page | 690 691 692 693 694 695 696 697 698 699 700 701 | Next Page >