Search Results

Search found 18677 results on 748 pages for 'current'.

Page 695/748 | < Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >

  • C++ abstract class template + type-specific subclass = trouble with linker

    - by user333279
    Hi there, The project in question is about different endpoints communicating with each other. An endpoint sends events (beyond the scope of the current problem) and can process incoming events. Each event is represented in a generic object as follows: #pragma interface ... // some includes template<typename T> class Event { public: Event(int senderId, Type type, T payload); // Type is an enum Event(int senderId, Type type, int priority, T payload); virtual ~Event(); virtual int getSenderId(); virtual int getPriority(); virtual T getPayload(); void setPriority(const int priority); protected: const int senderId; const Type type; const T payload; int priority; }; It has its implementing class with #pragma implementation tag. An endpoint is defined as follows: #pragma interface #include "Event.h" template<typename T> class AbstractEndPoint { public: AbstractEndPoint(int id); virtual ~AbstractEndPoint(); virtual int getId(); virtual void processEvent(Event<T> event) = 0; protected: const int id; }; It has its implementing class too, but only the constructor, destructor and getId() are defined. The idea is to create concrete endpoints for each different payload type. Therefore I have different payload objects and specific event classes for each type, e.g. Event<TelegramFormatA>, Event<TelegramFormatB> and ConcreteEndPoint for TelegramFormatA, ConcreteEndPoint for TelegramFormatB respectively. The latter classes are defined as class ConcreteEndPoint : AbstractEndPoint<TelegramFormatA> { ... } I'm using g++ 4.4.3 and ld 2.19. Everything compiles nicely, but the linker complaints about undefined references to type-specific event classes, like Event<TelegramFormatA>::Event(....) . I tried explicit instantiation using template class AbstractEndPoint<TelegramFormatA>; but couldn't get past the aforementioned linker errors. Any ideas would be appreciated.

    Read the article

  • GlGenTextures keeps returing 0's

    - by user146780
    I'm trying to generate textures like so: #define checkImageWidth 64 #define checkImageHeight 64 static GLubyte checkImage[checkImageHeight][checkImageWidth][4]; static GLubyte otherImage[checkImageHeight][checkImageWidth][4]; static GLuint texName[2]; void makeCheckImages(void) { int i, j, c; for (i = 0; i < checkImageHeight; i++) { for (j = 0; j < checkImageWidth; j++) { c = ((((i&0x8)==0)^((j&0x8))==0))*255; checkImage[i][j][0] = (GLubyte) c; checkImage[i][j][1] = (GLubyte) c; checkImage[i][j][2] = (GLubyte) c; checkImage[i][j][3] = (GLubyte) 255; c = ((((i&0x10)==0)^((j&0x10))==0))*255; otherImage[i][j][0] = (GLubyte) c; otherImage[i][j][1] = (GLubyte) 0; otherImage[i][j][2] = (GLubyte) 0; otherImage[i][j][3] = (GLubyte) 255; } } } void init(void) { glClearColor (1.0, 0.0, 0.0, 0.0); glShadeModel(GL_FLAT); glEnable(GL_DEPTH_TEST); makeCheckImages(); glPixelStorei(GL_UNPACK_ALIGNMENT, 1); glGenTextures(2, texName); glBindTexture(GL_TEXTURE_2D, texName[0]); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, checkImageWidth, checkImageHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, checkImage); glBindTexture(GL_TEXTURE_2D, texName[1]); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_DECAL); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, checkImageWidth, checkImageHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, otherImage); glEnable(GL_TEXTURE_2D); engineGL.current.tex = texName[1]; } But when I check the values of texName[0] and [1] they are both 0, I do not understand why, what am I doing wrong. Thanks.

    Read the article

  • Need help with 2 MySql Queries. Join vs Subqueries.

    - by BugBusterX
    I have 2 tables: user: id, name message: sender_id, receiver_id, message, read_at, created_at There are 2 results I need to retrieve and I'm trying to find the best solution. I have included queries that I'm using in the very end. I need to retrieve a list of users, and also with each user have information available whether there are any unread messages from each user (them as sender, me as receiver) and whether or not there are any read messages between us ( they send I'm receiver or I send they are receivers) I need Same as above, but only those members where there has been any messaging between us, sorted by unread first, then by last message received. Can you advise please? Should this be done with joins or subqueries? In first case I do not need the count, I just need to know whether or not there is at least one unread message. I'm posting code and my current queries, please have a look when you get a chance: BTW, everything is the way I want in fist query. My concern is: In second query I would like to order by messages.created_at, but I dont think I can do that with grouping? And also I dont know if this approach is the most optimized and fast. CREATE TABLE `user` ( `id` bigint(20) NOT NULL AUTO_INCREMENT, `name` varchar(255) NOT NULL, PRIMARY KEY (`id`) ) INSERT INTO `user` VALUES (1,'User 1'),(2,'User 2'),(3,'User 3'),(4,'User 4'),(5,'User 5'); CREATE TABLE `message` ( `id` bigint(20) NOT NULL AUTO_INCREMENT, `sender_id` bigint(20) DEFAULT NULL, `receiver_id` bigint(20) DEFAULT NULL, `message` text, `read_at` datetime DEFAULT NULL, `created_at` datetime NOT NULL, PRIMARY KEY (`id`) ) INSERT INTO `message` VALUES (1,3,1,'Messge',NULL,'2010-10-10 10:10:10'),(2,1,4,'Hey','2010-10-10 10:10:12','2010-10-10 10:10:11'),(3,4,1,'Hello','2010-10-10 10:10:19','2010-10-10 10:10:15'),(4,1,4,'Again','2010-10-10 10:10:25','2010-10-10 10:10:21'),(5,3,1,'Hiii',NULL,'2010-10-10 10:10:21'); SELECT u.*, m_new.id as have_new, m.id as have_any FROM user u LEFT JOIN message m_new ON (u.id = m_new.sender_id AND m_new.receiver_id = 1 AND m_new.read_at IS NULL) LEFT JOIN message m ON ((u.id = m.sender_id AND m.receiver_id = 1) OR (u.id = m.receiver_id AND m.sender_id = 1)) GROUP BY u.id SELECT u.*, m_new.id as have_new, m.id as have_any FROM user u LEFT JOIN message m_new ON (u.id = m_new.sender_id AND m_new.receiver_id = 1 AND m_new.read_at IS NULL) LEFT JOIN message m ON ((u.id = m.sender_id AND m.receiver_id = 1) OR (u.id = m.receiver_id AND m.sender_id = 1)) where m.id IS NOT NULL GROUP BY u.id

    Read the article

  • Property trigger in XAML for IsMouseOver fails to set Border.Background

    - by Mal Ross
    I'm currently trying to create a ControlTemplate for the Button class in WPF, replacing the usual visual tree with something that makes the button look similar to the little (X) close icon on Google Chrome's tabs. I decided to use a Path object in XAML to achieve the effect. Using a property trigger, the control responds to a change in the IsMouseOver property by setting the icon's red background. Here's the XAML from a test app: <Window x:Class="Widgets.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300"> <Window.Resources> <Style x:Key="borderStyle" TargetType="Border"> <Style.Triggers> <Trigger Property="IsMouseOver" Value="True"> <Setter Property="Background"> <Setter.Value> <SolidColorBrush Color="#CC0000"/> </Setter.Value> </Setter> </Trigger> </Style.Triggers> </Style> <ControlTemplate x:Key="closeButtonTemplate" TargetType="Button"> <Border Width="12" Height="12" CornerRadius="6" BorderBrush="#AAAAAA" Background="Transparent" Style="{StaticResource borderStyle}" ToolTip="Close"> <Viewbox Margin="2.75"> <Path Data="M 0,0 L 10,10 M 0,10 L 10,0" Stroke="{Binding BorderBrush, RelativeSource={RelativeSource FindAncestor, AncestorType=Border, AncestorLevel=1}}" StrokeThickness="1.8"/> </Viewbox> </Border> </ControlTemplate> </Window.Resources> <Grid Background="White"> <Button Template="{StaticResource closeButtonTemplate}"/> </Grid> </Window> Note that the circular background is always there - it's just transparent when the mouse isn't over it. The problem with this is that the trigger just isn't working. Nothing changes in the button's appearance. However, if I remove the Background="Transparent" value from the Border object in the ControlTemplate, the trigger does work (albeit only when over the 'X'). I really can't explain this. Setters for any other properties placed in the borderStyle resource work fine, but the Background setter fails as soon as the default background is specified in the ControlTemplate. Any ideas why it's happening and how I can fix it? I know I could easily replace this code with, for example, a .PNG-based image, but I want to understand why the current implementation isn't working. Thanks! :)

    Read the article

  • jquery mouseent/leave to make div appears

    - by Blake
    I am looking to hover over my list item and have an effect similar to something like facebook chat is my best example..I am able to get the first div to appear but I believe this may be a selector issue because I cant get the rest working properly html <ul id="menu_seo" class="menu"> <li id="menu-seo"><span class="arrowout1"></span>SEO</li> <li id="menu-siteaudits"><span class="arrowout2"></span>Site Audits </li> <li id="menu-linkbuilding"><span class="arrowout3"></span>Link-Building</li> <li id="menu-localseo"><span class="arrowout4"></span>Local SEO</li> </ul> <div id="main_content"> <div id="menu-seo-desc"> <p>SEO management begins with a full website diagnosis of current web strategy Adjustments are made to improve your site’s ability to rank higher on search engines and draw more traffic </p> </div> <div id="menu-seo-desc2"> <p>Usability & site architecture review, Search Engine accessibility and indexing, Keyword research & targeting and Conversion rate optimization </p> </div> </div> css #menu-seo-desc { height:125px; width:210px; background-color:red; border-color:#CCC #E8E8E8 #E8E8E8 #CCC; border-style:solid; border-width:1.5px; border-radius:5px; box-shadow: 1px 0 2px 0px #888; -moz-box-shadow: 1px 0 2px 0px #888; -webkit-box-shadow: 1px 0 2px 1px #888; position:absolute; top:220px; left:350px; display:none; } js <script> $(document).ready(function(){ <script> $(document).ready(function(){ $('#menu_seo').on('#menu-seo', { 'mouseenter': function() { $('#menu-seo-desc').fadeIn(600); $('#menu-seo-desc2').fadeIn(600); }, 'mouseleave': function() { $('#menu-seo-desc').fadeOut(300); $('#menu-seo-desc2').fadeOut(300); } }); }); </script> });

    Read the article

  • [iPhone Obj-C] How to move a label with the wave of the iPhone?

    - by Didi
    The code below is from the book Beginning iPhone 3 Development, chapter 15, using the accelerometer to control a ball. I want to use a label instead of the ball, and only move in the x direction. However, I donno how to revise the code to achieve this goal. Can anyone please help me? THX so much!!!! (id)initWithCoder:(NSCoder *)coder { if (self = [super initWithCoder:coder]) { self.image = [UIImage imageNamed:@"ball.png"]; self.currentPoint = CGPointMake((self.bounds.size.width / 2.0f) + (image.size.width / 2.0f), (self.bounds.size.height / 2.0f) + (image.size.height / 2.0f)); ballXVelocity = 0.0f; ballYVelocity = 0.0f; } return self; } (id)initWithFrame:(CGRect)frame { if (self = [super initWithFrame:frame]) { // Initialization code } return self; } (void)drawRect:(CGRect)rect { // Drawing code [image drawAtPoint:currentPoint]; } (void)dealloc { [image release]; [acceleration release]; [super dealloc]; } //#pragma mark - - (CGPoint)currentPoint { return currentPoint; } - (void)setCurrentPoint:(CGPoint)newPoint { previousPoint = currentPoint; currentPoint = newPoint; if (currentPoint.x < 0) { currentPoint.x = 0; //ballXVelocity = 0; ballXVelocity = - (ballXVelocity / 2.0); } if (currentPoint.y < 0){ currentPoint.y = 0; //ballYVelocity = 0; ballYVelocity = - (ballYVelocity / 2.0); } if (currentPoint.x > self.bounds.size.width - image.size.width) { currentPoint.x = self.bounds.size.width - image.size.width; //ballXVelocity = 0; ballXVelocity = - (ballXVelocity / 2.0); } if (currentPoint.y > self.bounds.size.height - image.size.height) { currentPoint.y = self.bounds.size.height - image.size.height; //ballYVelocity = 0; ballYVelocity = - (ballYVelocity / 2.0); } CGRect currentImageRect = CGRectMake(currentPoint.x, currentPoint.y, currentPoint.x + image.size.width, currentPoint.y + image.size.height); CGRect previousImageRect = CGRectMake(previousPoint.x, previousPoint.y, previousPoint.x + image.size.width, currentPoint.y + image.size.width); [self setNeedsDisplayInRect:CGRectUnion(currentImageRect, previousImageRect)]; } (void)draw { static NSDate *lastDrawTime; if (lastDrawTime != nil) { NSTimeInterval secondsSinceLastDraw = -([lastDrawTime timeIntervalSinceNow]); ballYVelocity = ballYVelocity + -(acceleration.y * secondsSinceLastDraw); ballXVelocity = ballXVelocity + acceleration.x * secondsSinceLastDraw; CGFloat xAcceleration = secondsSinceLastDraw * ballXVelocity * 500; CGFloat yAcceleration = secondsSinceLastDraw * ballYVelocity * 500; self.currentPoint = CGPointMake(self.currentPoint.x + xAcceleration, self.currentPoint.y +yAcceleration); } // Update last time with current time [lastDrawTime release]; lastDrawTime = [[NSDate alloc] init]; }

    Read the article

  • recursion resulting in extra unwanted data

    - by spacerace
    I'm writing a module to handle dice rolling. Given x die of y sides, I'm trying to come up with a list of all potential roll combinations. This code assumes 3 die, each with 3 sides labeled 1, 2, and 3. (I realize I'm using "magic numbers" but this is just an attempt to simplify and get the base code working.) int[] set = { 1, 1, 1 }; list = diceroll.recurse(0,0, list, set); ... public ArrayList<Integer> recurse(int index, int i, ArrayList<Integer> list, int[] set){ if(index < 3){ // System.out.print("\n(looping on "+index+")\n"); for(int k=1;k<=3;k++){ // System.out.print("setting i"+index+" to "+k+" "); set[index] = k; dump(set); recurse(index+1, i, list, set); } } return list; } (dump() is a simple method to just display the contents of list[]. The variable i is not used at the moment.) What I'm attempting to do is increment a list[index] by one, stepping through the entire length of the list and incrementing as I go. This is my "best attempt" code. Here is the output: Bold output is what I'm looking for. I can't figure out how to get rid of the rest. (This is assuming three dice, each with 3 sides. Using recursion so I can scale it up to any x dice with y sides.) [1][1][1] [1][1][1] [1][1][1] [1][1][2] [1][1][3] [1][2][3] [1][2][1] [1][2][2] [1][2][3] [1][3][3] [1][3][1] [1][3][2] [1][3][3] [2][3][3] [2][1][3] [2][1][1] [2][1][2] [2][1][3] [2][2][3] [2][2][1] [2][2][2] [2][2][3] [2][3][3] [2][3][1] [2][3][2] [2][3][3] [3][3][3] [3][1][3] [3][1][1] [3][1][2] [3][1][3] [3][2][3] [3][2][1] [3][2][2] [3][2][3] [3][3][3] [3][3][1] [3][3][2] [3][3][3] I apologize for the formatting, best I could come up with. Any help would be greatly appreciated. (This method was actually stemmed to use the data for something quite trivial, but has turned into a personal challenge. :) edit: If there is another approach to solving this problem I'd be all ears, but I'd also like to solve my current problem and successfully use recursion for something useful.

    Read the article

  • C++ Euler-Problem 14 Program Freezing

    - by Tim
    I'm working on Euler Problem 14: http://projecteuler.net/index.php?section=problems&id=14 I figured the best way would be to create a vector of numbers that kept track of how big the series was for that number... for example from 5 there are 6 steps to 1, so if ever reach the number 5 in a series, I know I have 6 steps to go and I have no need to calculate those steps. With this idea I coded up the following: #include <iostream> #include <vector> #include <iomanip> using namespace std; int main() { vector<int> sizes(1); sizes.push_back(1); sizes.push_back(2); int series, largest = 0, j; for (int i = 3; i <= 1000000; i++) { series = 0; j = i; while (j > (sizes.size()-1)) { if (j%2) { j=(3*j+1)/2; series+=2; } else { j=j/2; series++; } } series+=sizes[j]; sizes.push_back(series); if (series>largest) largest=series; cout << setw(7) << right << i << "::" << setw(5) << right << series << endl; } cout << largest << endl; return 0; } It seems to work relatively well for smaller numbers but this specific program stalls at the number 113382. Can anyone explain to me how I would go about figuring out why it freezes at this number? Is there some way I could modify my algorithim to be better? I realize that I am creating duplicates with the current way I'm doing it: for example, the series of 3 is 3,10,5,16,8,4,2,1. So I already figured out the sizes for 10,5,16,8,4,2,1 but I will duplicate those solutions later. Thanks for your help!

    Read the article

  • Problem in understanding connectSlotsByName() in pyqt???

    - by Jebagnanadas
    Hi all, I couldn't understand the connectSlotsByName() method which is predominently used by pyuic4.. As far the class is single in a PyQt file it's ok since we can use self which will be associated with a single object throughout.. But when we try to use various classes from different files the problem and the need to use connectSlotsByName() arises.. Here's what i encountered which is weird.. I created a stacked widget.. I placed my first widget on it.. It has a button called "Next ". On clicking next it hides the current widget and adds another widget which has the "click me" button.. The problem here is the click event for "click me" button in second is not captured.. It's a minimal example that i can give for my original problem.. Please help me.. This is file No.1..(which has the parent stacked widget and it's first page). On clicking next it adds the second page which has "clickme" button in file2.. from PyQt4 import QtCore, QtGui import file2 class Ui_StackedWidget(QtGui.QStackedWidget): def __init__(self,parent=None): QtGui.QStackedWidget.__init__(self,parent) self.setObjectName("self") self.resize(484, 370) self.setWindowTitle(QtGui.QApplication.translate("self", "stacked widget", None, QtGui.QApplication.UnicodeUTF8)) self.createWidget1() def createWidget1(self): self.page=QtGui.QWidget() self.page.setObjectName("widget1") self.pushButton=QtGui.QPushButton(self.page) self.pushButton.setGeometry(QtCore.QRect(150, 230, 91, 31)) self.pushButton.setText(QtGui.QApplication.translate("self", "Next >", None, QtGui.QApplication.UnicodeUTF8)) self.addWidget(self.page) QtCore.QMetaObject.connectSlotsByName(self.page) QtCore.QObject.connect(self.pushButton,QtCore.SIGNAL('clicked()'),self.showWidget2) def showWidget2(self): self.page.hide() obj=file2.widget2() obj.createWidget2(self) if __name__ == "__main__": import sys app = QtGui.QApplication(sys.argv) ui = Ui_StackedWidget() ui.show() sys.exit(app.exec_()) Here's file2 from PyQt4 import QtGui,QtCore class widget2(): def createWidget2(self,parent): self.page = QtGui.QWidget() self.page.setObjectName("page") self.parent=parent self.groupBox = QtGui.QGroupBox(self.page) self.groupBox.setGeometry(QtCore.QRect(30, 20, 421, 311)) self.groupBox.setObjectName("groupBox") self.groupBox.setTitle(QtGui.QApplication.translate("self", "TestGroupBox", None, QtGui.QApplication.UnicodeUTF8)) self.pushButton = QtGui.QPushButton(self.groupBox) self.pushButton.setGeometry(QtCore.QRect(150, 120, 92, 28)) self.pushButton.setObjectName("pushButton") self.pushButton.setText(QtGui.QApplication.translate("self", "Click Me", None, QtGui.QApplication.UnicodeUTF8)) self.parent.addWidget(self.page) self.parent.setCurrentWidget(self.page) QtCore.QMetaObject.connectSlotsByName(self.page) QtCore.QObject.connect(self.pushButton,QtCore.SIGNAL('clicked()'),self.printMessage) def printMessage(self): print("Hai") Though in both the widgets(i mean pages) QtCore.QMetaObject.connectSlotsByName(self.page) the clicked signal in second dialog isn't getting processed. Thanks in advance.. Might be a beginner question..

    Read the article

  • h:selectOneMenu not populating a 'selected' item

    - by dann.dev
    I'm having trouble with an h:selectOneMenu not having a selected item when there is already something set on the backing bean. I am using seam and have specified a customer converter. When working on my 'creation' page, everything works fine, something from the menu can be selected, and when the page is submitted, the correct value is assigned and persisted to the database as well. However when I work on my 'edit' page the menu's default selection is not the current selection. i have gone through and confirmed that something is definitely set etc. My selectOneMenu looks like this: <h:selectOneMenu id="selVariable" value="#{customer.variableLookup}" converter="#{variableLookupConverter}"> <s:selectItems var="source" value="#{customerReferenceHelper.variableLookups()}" label="#{source.name}" /> </h:selectOneMenu> And the converter is below. It very simple and just turns the id from string to int and back etc: @Name( "sourceOfWealthLookupConverter" ) public class SourceOfWealthLookupConverter implements Serializable, Converter { @In private CustomerReferenceHelper customerReferenceHelper; @Override public Object getAsObject( FacesContext arg0, UIComponent arg1, String arg2 ) { VariableLookup variable= null; try { if ( "org.jboss.seam.ui.NoSelectionConverter.noSelectionValue".equals( arg2 ) ) { return null; } CustomerReferenceHelper customerReferenceHelper = ( CustomerReferenceHelper ) Contexts.getApplicationContext().get( "customerReferenceHelper" ); Integer id = Integer.parseInt( arg2 ); source = customerReferenceHelper.getVariable( id ); } catch ( NumberFormatException e ) { log.error( e, e ); } return variable; } @Override public String getAsString( FacesContext arg0, UIComponent arg1, Object arg2 ) { String result = null; VariableLookup variable= ( VariableLookup ) arg2; Integer id = variable.getId(); result = String.valueOf( id ); return result; } } I've seen a few things about it possibly being the equals() method on the class, (that doesn't add up with everything else working, but I overrode it anyway as below, where the hashcode is just the id (id is a unique identifier for each item). Equals method: @Override public boolean equals( Object other ) { if ( other == null ) { return false; } if ( this == other ) { return true; } if ( !( other instanceof VariableLookup ) ) { return false; } VariableLookup otherVariable = ( VariableLookup ) other; if ( this.hashCode() == otherVariable.hashCode() ) { return true; } return false; } I'm at my wits end with this, I can't find what I could have missed?! Any help would be much appreciated

    Read the article

  • php add hours to date output wrong result

    - by i need help
    Basically what I want to do is to send an email to follow up on order placed in 3 hours later. What I try to do is to get the current date (up to hours level), then compare with the orderdate+ 3 hours, to see whether it match. Example orderdate: 2010-06-12 18, after add 3 hours should become 2010-06-12 21 However, after add hour, the final result sometimes become bigger, sometimes become smaller... something wrong. $now= date('Y-m-d H'); echo $now . "<br>"; ... ... while ($data = mysql_fetch_array ($result)) { $orderid = $data['orderid']; $orddate = $data['orddate']; $corddate= date('Y-m-d H:i:s', $orddate); $year = substr ($corddate, 0, 4); $month = substr ($corddate, 5, 2); $day = substr ($corddate, 8, 2); $hour = substr ($corddate, 11, 2); $actualorderdate= $year . "-" . $month . "-" . $day . " " . $hour; $new_time = mktime ($hour+3, 0, 0, $month, $day, $year); $year = date ('Y', $new_time); $month = date ('m', $new_time); $day= date ('d', $new_time); $hour= date ('h', $new_time); $xhourslater= $year . "-" . $month . "-" . $day . " " . $hour; echo "actualorderdate: ". $actualorderdate. " xhourslater: " . $xhourslater. "<br>"; if($now==$xhourslater) { echo "now is 3 hours later" . "<br>"; //send email follow up, then update status as sent, in order not to resend anytime in the 3rd hour. } }

    Read the article

  • Php random row help...

    - by Skillman
    I've created some code that will return a random row, (well, all the rows in a random order) But i'm assuming its VERY uneffiecent and is gonna be a problem in a big database... Anyone know of a better way? Here is my current code: $count3 = 1; $count4 = 1; //Civilian stuff... $query = ("SELECT * FROM `*Table Name*` ORDER BY `Id` ASC"); $result = mysql_query($query); while($row = mysql_fetch_array($result)) { $count = $count + 1; $civilianid = $row['Id']; $arrayofids[$count] = $civilianid; //echo $arrayofids[$count]; } while($alldone != true) { $randomnum = (rand()%$count) + 1; //echo $randomnum . "<br>"; //echo $arrayofids[$randomnum] . "<br>"; $currentuserid = $arrayofids[$randomnum]; $count3 += 1; while($count4 < $count3) { $count4 += 1; $currentarrayid = $listdone[$count4]; //echo "<b>" . $currentarrayid . ":" . $currentuserid . "</b> "; if ($currentarrayid == $currentuserid){ $found = true; //echo " '" .$found. "' "; } } if ($found == true) { //Reset array/variables... $count4 = 1; $found = false; } else { $listdone[$count3] = $currentuserid; //echo "<u>" . $count3 .";". $listdone[$count3] . "</u> "; $query = ("SELECT * FROM `*Tablesname*` WHERE Id = '$currentuserid'"); $result = mysql_query($query); $row = mysql_fetch_array($result); $username = $row['Username']; echo $username . "<br>"; $count4 = 1; $amountdone += 1; if ($amountdone == $count) { //$count $alldone = true; } } } Basically it will loop until its gets an id (randomly) that hasnt been chosen yet. -So the last username could take hours :P Is this 'bad' code? :P :(

    Read the article

  • Improving performance for WRITE operation on Oracle DB in Java

    - by Lucky
    I've a typical scenario & need to understand best possible way to handle this, so here it goes - I'm developing a solution that will retrieve data from a remote SOAP based web service & will then push this data to an Oracle database on network. Also, this will be a scheduled task that will execute every 15 minutes. I've event queues on remote service that contains the INSERT/UPDATE/DELETE operations that have been done since last retrieval, & once I retrieve the events for last 15 minutes, it again add events for next retrieval. Now, its just pushing data to Oracle so all my interactions are INSERT & UPDATE statements. There are around 60 tables on Oracle with some of them having 100+ columns. Moreover, for every 15 minutes cycle there would be around 60-70 Inserts, 100+ Updates & 10-20 Deletes. This will be an executable jar file that will terminate after operation & will again start on next 15 minutes cycle. So, I need to understand how should I handle WRITE operations (best practices) to improve performance for this application as whole ? Current Test Code (on every cycle) - Connects to remote service to get events. Creates a connection with DB (single connection object). Identifies the type of operation (INSERT/UPDATE/DELETE) & table on which it is done. After above, calls the respective method based on type of operation & table. Uses Preparedstatement with positional parameters, & retrieves each column value from remote service & assigns that to statement parameters. Commits the statement & returns to get event class to process next event. Above is repeated till all the retrieved events are processed after which program closes & then starts on next cycle & everything repeats again. Thanks for help !

    Read the article

  • GROUP BY and SUM distinct date across 2 tables

    - by kenitech
    I'm not sure if this is possible in one mysql query so I might just combine the results via php. I have 2 tables: 'users' and 'billing' I'm trying to group summed activity for every date that is available in these two tables. 'users' is not historical data but 'billing' contains a record for each transaction. In this example I am showing a user's status which I'd like to sum for created date and deposit amounts that I would also like to sum by created date. I realize there is a bit of a disconnect between the data but I'd like to some all of it together and display it as seen below. This will show me an overview of all of the users by when they were created and what the current statuses are next to total transactions. I've tried UNION as well as LEFT JOIN but I can't seem to get either to work. Union example is pretty close but doesn't combine the dates into one row. ( SELECT created, SUM(status) as totalActive, NULL as totalDeposit FROM users GROUP BY created ) UNION ( SELECT created, NULL as totalActive, SUM(transactionAmount) as totalDeposit FROM billing GROUP BY created ) I've also tried using a date lookup table and joining on the dates but the SUM values are being added multiple times. note: I don't care about the userIds at all but have it in here for the example. users table (where status of '1' denotes "active") (one record for each user) created | userId | status 2010-03-01 | 10 | 0 2010-03-01 | 11 | 1 2010-03-01 | 12 | 1 2010-03-10 | 13 | 0 2010-03-12 | 14 | 1 2010-03-12 | 15 | 1 2010-03-13 | 16 | 0 2010-03-15 | 17 | 1 billing table (record created for every instance of a billing "transaction" created | userId | transactionAmount 2010-03-01 | 10 | 50 2010-03-01 | 18 | 50 2010-03-01 | 19 | 100 2010-03-10 | 89 | 55 2010-03-15 | 16 | 50 2010-03-15 | 12 | 90 2010-03-22 | 99 | 150 desired result: created | sumStatusActive | sumStatusInactive | sumTransactions 2010-03-01 | 2 | 1 | 200 2010-03-10 | 0 | 1 | 55 2010-03-12 | 2 | 0 | 0 2010-03-13 | 0 | 0 | 0 2010-03-15 | 1 | 0 | 140 2010-03-22 | 0 | 0 | 150 Table dump: CREATE TABLE IF NOT EXISTS `users` ( `created` date NOT NULL, `userId` int(11) NOT NULL, `status` smallint(6) NOT NULL ) ENGINE=MyISAM DEFAULT CHARSET=latin1; INSERT INTO `users` (`created`, `userId`, `status`) VALUES ('2010-03-01', 10, 0), ('2010-03-01', 11, 1), ('2010-03-01', 12, 1), ('2010-03-10', 13, 0), ('2010-03-12', 14, 1), ('2010-03-12', 15, 1), ('2010-03-13', 16, 0), ('2010-03-15', 17, 1); CREATE TABLE IF NOT EXISTS `billing` ( `created` date NOT NULL, `userId` int(11) NOT NULL, `transactionAmount` int(11) NOT NULL ) ENGINE=MyISAM DEFAULT CHARSET=latin1; INSERT INTO `billing` (`created`, `userId`, `transactionAmount`) VALUES ('2010-03-01', 10, 50), ('2010-03-01', 18, 50), ('2010-03-01', 19, 100), ('2010-03-10', 89, 55), ('2010-03-15', 16, 50), ('2010-03-15', 12, 90), ('2010-03-22', 99, 150);

    Read the article

  • jQuery .ajax doesn't load Google Adsense

    - by Sahas Katta
    Hey Everyone, Just ran into an odd issue. I have a simple WP loop and instead of regular NEXT/BACK pages, I use a jQuery powered $.ajax get to append the following page to the current page. It works perfectly. However, I choose to insert a Google Adsense unit every 5th story. Unfortunately, the Adsense unit that is brought in with a second, third, or etc page load don't render. Here's my loop: 10 stories per page, Adsense after the 4th one. <?php $count = 0; ?> <?php if ( have_posts() ) : ?> <?php while ( have_posts() ) : the_post(); ?> <?php $count++; ?> <div class="card"> <div class="title"> <a href="<?php the_permalink(); ?>" title="<?php the_title(); ?>"><span><?php the_title(); ?></span></a> </div> </div> <?php if ($count == 4) : ?> <div class="card"> <!-- ADSENSE CODE HERE (Straight from Google Adsense Panel, no tweaks.) --> </div> <?php endif; ?> As for my jQuery script, here's how that looks: $.ajax({ url: nextPageLink, type: 'GET', success: function(data) { $(data).find('#reviews .card').appendTo('#reviews'); }, error: function(xhr, status, error) { $('.loadination').addClass('hidden'); } }); Keep in mind, I just simplified my code to give you guys an example. The code above was just the essentials. All the loading stuff works perfectly. Images, text, links, etc all load just fine. However, the Google Adsense unit doesn't. Any help would be appreciated. Thanks and Happy Holidays!

    Read the article

  • VS 2010 IDE 2GB limt

    - by user561732
    I am using VS 2010 on a win 7 64 bit system with 8 GB of memory. My application is 32 bit. While in the VS 2010 .Net IDE, the app shows up in the Windows task manager as "MyApp.vshost.exe *32" while the VS IDE itself shows up as "devenv.exe *32". I checked and it appears that the VS 2010 IDE file (devenv.exe) is complied with the /LargeAddressAware flag. However, when debugging large models, the IDE fails with an Out of memory exception. In the Windows Task manager, the "MyApp.vshost.exe *32" process indicates about 1400 MB of memory usage (while the "devenv.exe *32" process is well under 500 MB). Is it possible to set the "MyApp.vshost.exe *32" process to be /LargeAddressAware in order to avoid this out of memory situation? If so, how can this be done in the IDE. While setting the final application binary to be /LargeAddressAware would work, I still need to be able to debug the app in the IDE with these type of large models. I should also note that my app has a deep object hierarchy with many collections that together required a lot of memory. However, my issue is not related to trying to create say 1 large array that requires greater then 2 GB of memory etc. I should note that I am able to run the same app in the VB6 IDE and not get an out of memory situation as long as the VB6 IDE is made /LargeAddressAware. In the case of VB6, the IDE and the app being debugged are part of the same process (and not split into 2 as is the case with VS 2010.) The VB6 process can be larger then 3 GB without running into out of memory issues. Ultimately, my objective is to have my app run completely in 64 bit to access more memory. I am hoping that in such cases, the IDE will allow the debugging process to exceed 2 GB without crashing (and certainly more then 1.4 GB as is the current case). However, for now, while 95% of my app is 64 bit, I am calling a legacy COM 32 bit DLL and as such, my entire app is forced to still run in 32 bit mode until I replace that DLL.

    Read the article

  • Hot to implement grails server-side-triggered dialog, or how to break out of update region after AJA

    - by werner5471
    In grails, I use the mechanism below in order to implement what I'd call a conditional server-side-triggered dialog: When a form is submitted, data must first be processed by a controller. Based on the outcome, there must either be a) a modal Yes/No confirmation in front of the "old" screen or b) a redirect to a new controller/view replacing the "old" screen (no confirmation required). So here's my current approach: In the originating view, I have a <g:formRemote name="requestForm" url="[controller:'test', action:'testRequest']", update:"dummyRegion"> and a <span id="dummyRegion"> which is hidden by CSS When submitting the form, the test controller checks if a confirmation is necessary and if so, renders a template with a yui-based dialog including Yes No buttons in front of the old screen (which works fine because the dialog "comes from" the dummyRegion, not overwriting the page). When Yes is pressed, the right other controller & action is called and the old screen is replaced, if No is pressed, the dialog is cancelled and the "old" screen is shown again without the dialog. Works well until here. When submitting the form and test controller sees that NO confirmation is necessary, I would usually directly redirect to the right other controller & action. But the problem is that the corresponding view of that controller does not appear because it is rendered in the invisble dummyRegion as well. So I currently use a GSP template including a javascript redirect which I render instead. However a javascript redirect is often not allowed by the browser and I think it's not a clean solution. So (finally ;-) my question is: How do I get a controller redirect to cause the corresponding view to "break out" of my AJAX dummyRegion, replacing the whole screen again? Or: Do you have a better approach for what I have in mind? But please note that I cannot check on the client side whether the confirmation is necessary, there needs to be a server call! Also I'd like to avoid that the whole page has to be refreshed just for the confirmation dialog to pop up (which would also be possible without AJAX). Thanks for any hints!

    Read the article

  • Identifying if a user is in the local administrators group

    - by Adam Driscoll
    My Problem I'm using PInvoked Windows API functions to verify if a user is part of the local administrators group. I'm utilizing GetCurrentProcess, OpenProcessToken, GetTokenInformationand LookupAccountSid to verify if the user is a local admin. GetTokenInformation returns a TOKEN_GROUPS struct with an array of SID_AND_ATTRIBUTES structs. I iterate over the collection and compare the user names returned by LookupAccountSid. My problem is that, locally (or more generally on our in-house domain), this works as expected. The builtin\Administrators is located within the group membership of the current process token and my method returns true. On another domain of another developer the function returns false. The LookupAccountSid functions properly for the first 2 iterations of the TOKEN_GROUPS struct, returning None and Everyone, and then craps out complaining that "A Parameter is incorrect." What would cause only two groups to work correctly? The TOKEN_GROUPS struct indicates that there are 14 groups. I'm assuming it's the SID that is invalid. Everything that I have PInvoked I have taken from an example on the PInvoke website. The only difference is that with the LookupAccountSid I have changed the Sid parameter from a byte[] to a IntPtr because SID_AND_ATTRIBUTESis also defined with an IntPtr. Is this ok since LookupAccountSid is defined with a PSID? LookupAccountSid PInvoke [DllImport("advapi32.dll", CharSet = CharSet.Auto, SetLastError = true)] static extern bool LookupAccountSid( string lpSystemName, IntPtr Sid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse); Where the code falls over for (int i = 0; i < usize; i++) { accountCount = 0; domainCount = 0; //Get Sizes LookupAccountSid(null, tokenGroups.Groups[i].SID, null, ref accountCount, null, ref domainCount, out snu); accountName2.EnsureCapacity((int) accountCount); domainName.EnsureCapacity((int) domainCount); if (!LookupAccountSid(null, tokenGroups.Groups[i].SID, accountName2, ref accountCount, domainName, ref domainCount, out snu)) { //Finds its way here after 2 iterations //But only in a different developers domain var error = Marshal.GetLastWin32Error(); _log.InfoFormat("Failed to look up SID's account name. {0}", new Win32Exception(error).Message); continue; } If more code is needed let me know. Any help would be greatly appreciated.

    Read the article

  • priority_queue with dynamic priorities

    - by Layne
    Hey, I have a server application which accepts incomming queries and executes them. If there are too many queries they should be queued and if some of the other queries got executed the queued queries should be executed as well. Since I want to pass queries with different priorities I think using a priority_queue would be the best choice. e.g. The amout of the axcepting queries (a) hit the limt and new queries will be stored in the queue. All queries have a priority of 1 (lowest) if some of the queries from (a) get executed the programm will pick the query with the highest priority out of the queue and execute it. Still no problem. Now someone is sending a query with a priority of 5 which gets added to the queue. Since this is the query with the highest priority the application will execute this query as soon as the running queries no longer hit the limit. There might be the worst case that 500 queries with a priority of 1 are queued but wont be executed since someone is always sending queries with a priority of 5 hence these 500 queries will be queued for a looooong time. In order to prevent that I want to increase the prioritiy of all queries which have a lower priority than the query with the higher priority, in this example which have a priority lower than 5. So if the query with a priority of 5 gets pulled out of the queue all other queries with a priority < 5 should be increased by 0.2. This way queries with a low priority wont be queued for ever even if there might be 100 queries with a higher priority. I really hope can help me to solve the problem with the priorities: Since my queries consist of an object I thought something like this might work: class Query { public: Query( std::string p_stQuery ) : stQuery( p_stQuery ) {}; std::string getQuery() const {return stQuery;}; void increasePriority( const float fIncrease ) {fPriority += fIncrease;}; friend bool operator < ( const Query& PriorityFirst, const Query& PriorityNext ) { if( PriorityFirst.fPriority < PriorityNext.fPriority ) { if( PriorityFirst.fStartPriority < PriorityNext.fStartPriority ) { Query qTemp = PriorityFirst; qTemp.increasePriority( INCREASE_RATE ); } return true; } else { return false; } }; private: static const float INCREASE_RATE = 0.2; float fPriority; // current priority float fStartPriority; // initialised priority std::string stQuery; };

    Read the article

  • C++ class is not recognizing string data type

    - by reallythecrash
    I'm working on a program from my C++ textbook, and this this the first time I've really run into trouble. I just can't seem to see what is wrong here. Visual Studio is telling me Error: identifier "string" is undefined. I separated the program into three files. A header file for the class specification, a .cpp file for the class implementation and the main program file. These are the instructions from my book: Write a class named Car that has the following member variables: year. An int that holds the car's model year. make. A string that holds the make of the car. speed. An int that holds the car's current speed. In addition, the class should have the following member functions. Constructor. The constructor should accept the car's year and make as arguments and assign these values to the object's year and make member variables. The constructor should initialize the speed member variable to 0. Accessors. Appropriate accessor functions should be created to allow values to be retrieved from an object's year, make and speed member variables. There are more instructions, but they are not necessary to get this part to work. Here is my source code: // File Car.h -- Car class specification file #ifndef CAR_H #define CAR_H class Car { private: int year; string make; int speed; public: Car(int, string); int getYear(); string getMake(); int getSpeed(); }; #endif // File Car.cpp -- Car class function implementation file #include "Car.h" // Default Constructor Car::Car(int inputYear, string inputMake) { year = inputYear; make = inputMake; speed = 0; } // Accessors int Car::getYear() { return year; } string Car::getMake() { return make; } int Car::getSpeed() { return speed; } // Main program #include <iostream> #include <string> #include "Car.h" using namespace std; int main() { } I haven't written anything in the main program yet, because I can't get the class to compile. I've only linked the header file to the main program. Thanks in advance to all who take the time to investigate this problem for me.

    Read the article

  • Is it possible to make this Flex/Flash application safe?

    - by Frank
    I'm back with another Flex/Flash security question. I've already received some help from the community on this topic, but I'm still not quite sure this is the best way to do. Here's the thing. A flex web app, a lot of users (1000+), custom configuration of the application depending of the user group. Can I make this thing safe... or safer. For the moment, when a user comes to the application, there is only one configuration possible, but for the next version we've implented a multi-configuration protocol, this way : 1. The user connect to Default.aspx, server code process the windows credentials (whe are on intranet) and give the correct xml configuration file. 2. The flex app loads with the xml conf file as a flashvar and then the app 'builds' itself with the content of the xml file. As we know, since this is a flex application the swf is downloaded on the client computer and the xml file too. If more than one user connects to the app, from the same computer, the can possibly see the other xml file in the windows temp folder. The current directory of the application looks that way : Web site |-> default.aspx |-> index.swf |-> configAdmin.xml |-> configUserType1.xml |-> configUserType2.xml |-> com |-> a lot of swf and xml files I was first thinking making another directory (without read access for the client) containing all the configurations xml files, picking the right one, copying it to the client and deleting it afterwards. But it seems like I must let know the user know when downloading/deleting content on it's computer... I'm running out of ideas, so I hope you have some great ones. It's there are some design flaws (in the way the app is build, not in Flash :p) please share. I'm always looking forward to improve. Thanks Update : In browser Flash/Flex (without AIR that is) doesn't allow deleting file localy silently (on the client computer, where the application is). It's also not yet possible to get session data.

    Read the article

  • Disregard a particular TD element

    - by RussellDias
    Below I have the code that allows me to edit a table row inline. However it edits ALL of the TDs within that row. My problem, along with the code, are stated below. Any help is appreciated. <tbody> <tr> <th scope="row">Test</th> <td class="amount">$124</td> <td class="amount" id="" >$154</td> <td class="diff">- 754</td> </tr> </tbody> The above table is just a sample. What I have been trying to accomplish is, to simply edit the TDs within that particular row, but I need it to disregard the diff TD. I'm fairly new to jQuery and have got the following code via the help of a jQuery book. $(document).ready(function() { TABLE.formwork('#current-expenses'); }); var TABLE = {}; TABLE.formwork = function(table){ var $tables = $(table); $tables.each(function () { var _table = $(this); _table.find('thead tr').append($('<th class="edit">&nbsp;</th>')); _table.find('tbody tr').append($('<td class="edit"><input type="button" value="Edit"/></td>')) }); $tables.find('.edit :button').live('click', function(e) { TABLE.editable(this); e.preventDefault(); }); } TABLE.editable = function(button) { var $button = $(button); var $row = $button.parents('tbody tr'); var $cells = $row.children('td').not('.edit'); if($row.data('flag')) { // in edit mode, move back to table // cell methods $cells.each(function () { var _cell = $(this); _cell.html(_cell.find('input').val()); }) $row.data('flag',false); $button.val('Edit'); } else { // in table mode, move to edit mode // cell methods $cells.each(function() { var _cell = $(this); _cell.data('text', _cell.html()).html(''); if($('td.diff')){ var $input = $('<input type="text" />') .val(_cell.data('text')) .width(_cell.width() - 16); _cell.append($input); } }) $row.data('flag', true); $button.val('Save'); } } I have attempted to alter the code so that it would disregard the diff class TD, but have had no luck so far.

    Read the article

  • Command prompt in debug mode for Eclipse? (OpenCV + Eclipse + Win7)

    - by Tony
    I am a beginner for Eclipse. I now have Eclipse C/C++ IDE with OpenCV library running on Windows 7. So far it works after spending hours trying to get it running. But then I realize that Eclipse does not pop up a command prompt as VS2010 does while debugging. And moreover Eclipse's debug mode is just stuck in there and refuse to output anything. But if the code doesn't involve the OpenCV things it works again. Below is the code I use for testing. It captures images from webcam and output it to the screen. The infinite loop (until you press 'q') makes sure it constantly grabs new inputs from the camera. I browsed through the workspace and run the exe just compiled and it worked flawlessly. So I don't think there's anything wrong in the code (it's an example code anyway In brief, can I just pop up a command prompt window in debug mode? And why is Eclipse console stuck when the code involves some OpenCV functions? #include <stdio.h> #include <stdlib.h> #include <tchar.h> #include <cv.h> #include <cxcore.h> #include <highgui.h> #include <iostream> int _tmain(int argc, _TCHAR* argv[]) { CvCapture *capture = 0; IplImage *frame = 0; int key = 0; /* initialize camera */ capture = cvCaptureFromCAM( 0 ); /* always check */ if ( !capture ) { printf("Cannot open initialize webcam!\n"); return 1; } /* create a window for the video */ cvNamedWindow( "result", CV_WINDOW_AUTOSIZE ); while( key != 'q' ) { /* get a frame */ frame = cvQueryFrame( capture ); /* always check */ if( !frame ) break; /* display current frame */ cvShowImage( "result", frame ); /* exit if user press 'q' */ key = cvWaitKey( 1 ); } /* free memory */ cvDestroyWindow( "result" ); cvReleaseCapture( &capture ); return 0; }

    Read the article

  • allignment issue of div tag

    - by Quasar the space thing
    I am trying to create a web page where on click of a button I can add div tags. What I thought to do was that I'll create two div tags within a single div so that over all presentation will be uniform and similar to a table having two columns and multiple rows and the first column contains only label's and second column will contain textbox. Here is the JS file : var counter = 0; function create_div(type){ var dynDiv = document.createElement("div"); dynDiv.id = "divid_"+counter; dynDiv.class="main"; document.body.appendChild(dynDiv); question(); if(type == 'ADDTEXTBOX'){ ADDTEXTBOX(); } counter=counter+1; } function question(){ var question_div = document.createElement("div"); question_div.class="question"; question_div.id = "question_div_"+counter; var Question = prompt("Enter The Question here:", ""); var node=document.createTextNode(Question); question_div.appendChild(node); var element=document.getElementById("divid_"+counter); element.appendChild(question_div); } function ADDTEXTBOX(){ var answer_div = document.createElement("div"); answer_div.class="answer"; answer_div.id = "answer_div_"+counter; var answer_tag = document.createElement("input"); answer_tag.id = "answer_tag_"+counter; answer_tag.setAttribute("type", "text"); answer_tag.setAttribute("name", "textbox"); answer_div.appendChild(answer_tag); var element=document.getElementById("divid_"+counter); element.appendChild(answer_div); } Here is the css file : .question { width: 40%; height: auto; float: left; display: inline-block; text-align: justify; word-wrap:break-word; } .answer { padding-left:10%; width: 40%; height: auto; float: left; overflow: auto; word-wrap:break-word; } .main { width: auto; background-color:gray; height: auto; overflow: auto; word-wrap:break-word; } My problem is that the code is working properly but both the divisions are not coming in a straight line. after the first div prints on the screen the second divisions comes in another line. How can I make both the div's come in the same line ? Thank You. PS : should I stick with the current idea of using div or should I try some other approach ? like tables ?

    Read the article

  • Abstract class and an inheritor: is it possible to factorize .parent() here?

    - by fge
    Here are what I think are the relevant parts of the code of these two classes. First, TreePointer (original source here): public abstract class TreePointer<T extends TreeNode> implements Iterable<TokenResolver<T>> { //... /** * What this tree can see as a missing node (may be {@code null}) */ private final T missing; /** * The list of token resolvers */ protected final List<TokenResolver<T>> tokenResolvers; /** * Main protected constructor * * <p>This constructor makes an immutable copy of the list it receives as * an argument.</p> * * @param missing the representation of a missing node (may be null) * @param tokenResolvers the list of reference token resolvers */ protected TreePointer(final T missing, final List<TokenResolver<T>> tokenResolvers) { this.missing = missing; this.tokenResolvers = ImmutableList.copyOf(tokenResolvers); } /** * Alternate constructor * * <p>This is the same as calling {@link #TreePointer(TreeNode, List)} with * {@code null} as the missing node.</p> * * @param tokenResolvers the list of token resolvers */ protected TreePointer(final List<TokenResolver<T>> tokenResolvers) { this(null, tokenResolvers); } //... /** * Tell whether this pointer is empty * * @return true if the reference token list is empty */ public final boolean isEmpty() { return tokenResolvers.isEmpty(); } @Override public final Iterator<TokenResolver<T>> iterator() { return tokenResolvers.iterator(); } // .equals(), .hashCode(), .toString() follow } Then, JsonPointer, which contains this .parent() method which I'd like to factorize here (original source here: public final class JsonPointer extends TreePointer<JsonNode> { /** * The empty JSON Pointer */ private static final JsonPointer EMPTY = new JsonPointer(ImmutableList.<TokenResolver<JsonNode>>of()); /** * Return an empty JSON Pointer * * @return an empty, statically allocated JSON Pointer */ public static JsonPointer empty() { return EMPTY; } //... /** * Return the immediate parent of this JSON Pointer * * <p>The parent of the empty pointer is itself.</p> * * @return a new JSON Pointer representing the parent of the current one */ public JsonPointer parent() { final int size = tokenResolvers.size(); return size <= 1 ? EMPTY : new JsonPointer(tokenResolvers.subList(0, size - 1)); } // ... } As mentioned in the subject, the problem I have here is with JsonPointer's .parent() method. In fact, the logic behind this method applies to TreeNode all the same, and therefore to its future implementations. Except that I have to use a constructor, and of course such a constructor is implementation dependent :/ Is there a way to make that .parent() method available to each and every implementation of TreeNode or is it just a pipe dream?

    Read the article

< Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >