Search Results

Search found 27050 results on 1082 pages for 'project'.

Page 696/1082 | < Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >

  • HTML5 video capture and streaming?

    - by Shyatic
    I'm working on kind of an educational site, where there are teachers and students around the world (potentially). Since it's a non-profit site, and I don't have the need for it to be done tomorrow (kind of a side project of something bigger), I wanted to know the best way to figure out how to do this. I'm not a programmer by trade, I've been on the systems side of things for years, but I understand most technology and the question here is more how to gauge what to do so I can get the right resources in place. That said... here's what I am looking at. I figure the future is HTML5, and that's probably where I'd rather spend my efforts given that it will be cross platform and without the need for plugins. It will work on mobile as well. Question is, how well does HTML5 handle input media, say desktop capture and camera, or on mobile perhaps, where I'd want to use the user's phone camera, etc. Second question is dynamic streaming... I've read about MPEG DASH, then there are technologies like Smooth Streaming (which I think given the way Silverlight is going is going to be gone or useless), then also Apple and Flash, but if I'm doing HTML5 it doesn't benefit me. Any ideas here would be really helpful, and the more detail the better! :) That's about it... there are free chat services out there like using the MSN Web Chat controls (how good they are, I don't know, but worldwide most people have a Hotmail/MSN account) so I can use that for chat. I don't know its limitations of course, but that's something if people know or have suggestions, then I'm all ears. Thanks for the help, I greatly appreciate it!

    Read the article

  • How do you KISS?

    - by Conor
    The KISS principle is a highly quoted design mantra. The aim of this principle is to stamp out unnecessary complexity on a project. This is a good thing, saving time, energy and money. It can lead to a relatively stress free implementation and a simple, elegant, maintainable end product. A lot of discussion on KISS provides mechanisms to simplify requirements, design and implementation. Things that spring to mind include: avoid scope creep; simple obvious design and code; minimal run-time dependencies; refactoring to maintain simplicity; etc. However there are a lot of implicit things that we do to KISS. Examples: small team sizes; minimal management layers; tidy desk; mastery of a single IDE; clear concise error messages; scripts to automate/encapsulate tasks; etc Why KISS practices do you apply? How have they been of benefit? I'm especially interested in non-obvious practices.

    Read the article

  • basic device that can connect to internet

    - by Hellnar
    Hello, I am looking for a cheap solution to my problem: I need to find either an already existing common device (that is used in restaurants, bars clubs) or a cheap new device that I will distribute to those places, which can connect to internet (via the already existing ethernet or wireless based internet) and do HTTP request/receive response and retrieve information ? (For instance can a POS device connect to internet?) For a project, I need to do identity validation on several restaurants and bars and not all of them have computers. So I will be giving "cheap and easy to use devices" and non-IT personal can use it to do http request to my server and get response. All I can think of is Cell phones and SMS.

    Read the article

  • Antenna Aligner part 2: Finding the right direction

    - by Chris George
    Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

    Read the article

  • Was API hooking done as needed for Stuxnet to work? I don't think so

    - by The Kaykay
    Caveat: I am a political science student and I have tried my level best to understand the technicalities; if I still sound naive please overlook that. In the Symantec report on Stuxnet, the authors say that once the worm infects the 32-bit Windows computer which has a WINCC setup on it, Stuxnet does many things and that it specifically hooks the function CreateFileA(). This function is the route which the worm uses to actually infect the .s7p project files that are used to program the PLCs. ie when the PLC programmer opens a file with .s7p the control transfers to the hooked function CreateFileA_hook() instead of CreateFileA(). Once Stuxnet gains the control it covertly inserts code blocks into the PLC without the programmers knowledge and hides it from his view. However, it should be noted that there is also one more function called CreateFileW() which does the same task as CreateFileA() but both work on different character sets. CreateFileA works with ASCII character set and CreateFileW works with wide characters or Unicode character set. Farsi (the language of the Iranians) is a language that needs unicode character set and not ASCII Characters. I'm assuming that the developers of any famous commercial software (for ex. WinCC) that will be sold in many countries will take 'Localization' and/or 'Internationalization' into consideration while it is being developed in order to make the product fail-safe ie. the software developers would use UNICODE while compiling their code and not just 'ASCII'. Thus, I think that CreateFileW() would have been invoked on a WINCC system in Iran instead of CreateFileA(). Do you agree? My question is: If Stuxnet has hooked only the function CreateFileA() then based on the above assumption there is a significant chance that it did not work at all? I think my doubt will get clarified if: my assumption is proved wrong, or the Symantec report is proved incorrect. Please help me clarify this doubt. Note: I had posted this question on the general stackexchange website and did not get appropriate responses that I was looking for so I'm posting it here.

    Read the article

  • Android Card Game Database for Deck Building

    - by Singularity222
    I am making a card game for Android where a player can choose from a selection of cards to build a deck that would contain around 60 cards. Currently, I have the entire database of cards created that the user can browse. The next step is allowing the user to select cards and create a deck with whatever cards they would like. I have a form where the user can search for specific cards based off a few different attributes. The search results are displayed in a List Activity. My thought about deck creation is to add the primary key of each card the user selects to a SQLite Database table with the amount they would like in the deck. This way as the user performs searches for cards they can see the state of the deck. Once the user decides to save the deck. I'll export the card list to XML and wipe the contents of the table. If the user wanted to make changes to the deck, they would load it, it would be parsed back into the table so they could make the changes. A similar situation would occur when the eventually load the deck to play a game. I'm just curious what the rest of you may think of this method. Currently, this is a personal project and I am the only one working on it. If I can figure out the best implementation before I even begin coding I'm hoping to save myself some time and trouble.

    Read the article

  • Is there an excuse for short variable names?

    - by KChaloux
    This has become a large frustration with the codebase I'm currently working in; many of our variable names are short and undescriptive. I'm the only developer left on the project, and there isn't documentation as to what most of them do, so I have to spend extra time tracking down what they represent. For example, I was reading over some code that updates the definition of an optical surface. The variables set at the start were as follows: double dR, dCV, dK, dDin, dDout, dRin, dRout dR = Convert.ToDouble(_tblAsphere.Rows[0].ItemArray.GetValue(1)); dCV = convert.ToDouble(_tblAsphere.Rows[1].ItemArray.GetValue(1)); ... and so on Maybe it's just me, but it told me essentially nothing about what they represented, which made understanding the code further down difficult. All I knew was that it was a variable parsed out specific row from a specific table, somewhere. After some searching, I found out what they meant: dR = radius dCV = curvature dK = conic constant dDin = inner aperture dDout = outer aperture dRin = inner radius dRout = outer radius I renamed them to essentially what I have up there. It lengthens some lines, but I feel like that's a fair trade off. This kind of naming scheme is used throughout a lot of the code however. I'm not sure if it's an artifact from developers who learned by working with older systems, or if there's a deeper reason behind it. Is there a good reason to name variables this way, or am I justified in updating them to more descriptive names as I come across them?

    Read the article

  • Sun2Oracle: Upgrading from DSEE to the next generation Oracle Unified Directory

    - by Darin Pendergraft
    Mark your calendars and register to join this webcast featuring Steve Giovanetti from Hub City Media, Albert Wu from UCLA and our own Scott Bonnell as they discuss a directory upgrade project from Sun DSEE to Oracle Unified Directory. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Date: Thursday, September 13, 2012 Time: 10:00 AM Pacific Join us for this webcast and you will: Learn from one customer that has successfully upgraded to the new platform See what technology and business drivers influenced the upgrade Hear about the benefits of OUD’s elastic scalability and unparalleled performance Get additional information and resources for planning an upgrade Register Now!

    Read the article

  • How to convert an image to a .dwg file

    - by erikric
    My girlfriend is making an art project where she is having an image printed and cut out on a metal plate. The firm responsible for doing this is demanding a .dwg file (and something called polyline; some sort of setting maybe?). Neither of us have heard about this file format, and I find the information about it quite confusing. Most pages seem to link to some schetchy "FooToBarConverter" software, that I frankly don't trust. Could someone please enlighten us on what we need to do, or point to some safe and preferably free software that could do this? (An explanation of the dwg format and the polyline thing would also be much appreciated)

    Read the article

  • Is there ever a reason to do all an object's work in a constructor?

    - by Kane
    Let me preface this by saying this is not my code nor my coworkers' code. Years ago when our company was smaller, we had some projects we needed done that we did not have the capacity for, so they were outsourced. Now, I have nothing against outsourcing or contractors in general, but the codebase they produced is a mass of WTFs. That being said, it does (mostly) work, so I suppose it's in the top 10% of outsourced projects I've seen. As our company has grown, we've tried to take more of our development in house. This particular project landed in my lap so I've been going over it, cleaning it up, adding tests, etc etc. There's one pattern I see repeated a lot and it seems so mindblowingly awful that I wondered if maybe there is a reason and I just don't see it. The pattern is an object with no public methods or members, just a public constructor that does all the work of the object. For example, (the code is in Java, if that matters, but I hope this to be a more general question): public class Foo { private int bar; private String baz; public Foo(File f) { execute(f); } private void execute(File f) { // FTP the file to some hardcoded location, // or parse the file and commit to the database, or whatever } } If you're wondering, this type of code is often called in the following manner: for(File f : someListOfFiles) { new Foo(f); } Now, I was taught long ago that instantiated objects in a loop is generally a bad idea, and that constructors should do a minimum of work. Looking at this code it looks like it would be better to drop the constructor and make execute a public static method. I did ask the contractor why it was done this way, and the response I got was "We can change it if you want". Which was not really helpful. Anyway, is there ever a reason to do something like this, in any programming language, or is this just another submission to the Daily WTF?

    Read the article

  • Announcing Spacewalk Support for Oracle Linux Basic and Premier Customers

    - by Michele Casey
    Over the years, customers migrating to Oracle Linux have asked for options to provide a transitional solution for their existing system management tools (such as Red Hat Satellite Server) while evaluating and planning migrations to Oracle's Enterprise Manager, which is offered at no additional charge with Oracle Linux Support Subscriptions.  Based on this request, we are pleased to announce support for the open-source community project, Spacewalk, which is the basis for both Red Hat Satellite Server and SUSE Manager.  Effective today, customers with Oracle Linux Basic and Premier Support subscriptions have access to a fully supported Spacewalk build which can be setup to easily manage Oracle Linux systems.   Spacewalk support for Oracle Linux requires Oracle Linux 6, x86_64 for the server and provides support for Oracle Linux 5 and Oracle Linux 6 (x86, x86_64) clients.  This solution requires Oracle Database 11g Release 2 as the  supported database repository for Spacewalk with Oracle Linux.  Within the next several weeks, a limited use license for the Oracle Database will be included with this offer.  Until this is complete, customers may use an existing Oracle database license or they may begin by downloading a 30-day trial license from eDelivery.  Customers with Oracle Linux Basic and Premier subscriptions will automatically have access to the channel hosting the supported build.  Please review the release notes for further instructions. Oracle Enterprise Manager is still the recommended enterprise solution for managing Oracle Linux systems and we want to provide the easiest transition path for our customers.  We are excited to offer this solution to our Oracle Linux customers while they plan and implement their migration to Oracle Enterprise Manager. 

    Read the article

  • MQTT, GWT, ActiveMQ stack to bring jms to the browser

    - by scphantm
    I am in the preliminary stages of architecting a legacy replacement project. They already have sub half second performance on their green screens and they want the same on their web app. We have a 390 mainframe that can handle anything we throw at it but they don't have a good jvm for it, so we have two tiers of websphere servers between the mainframe and the browser, The ui server, and the bl server. For the ui, I'm leaning towards GWT. But one thing that I think would seal the deal is to add messaging capabilities to the browser. The idea is say you click on a link that displays a second panel of information, instead of the classic GWT where it triggers a GWT-RPC call to the ui server, the ui server routs it to the bl server, the bl sends it to the mainframe and back out, it drops an MQTT message directly to the bl server or directly to the mainframe. Say writes go to the bl, reads go to the mainframe. This is an easy enough thing in classic jms because you can issue a message that has an expected response. Then have your callback ready to get the resonse. But from what I'm reading so far. It looks like mqtt doesn't have that. It looks like it's strictly fire and forget, which would make it really tough to come up with a way to get a response back to the workstation that called it. Am I right here? Has anyone tried this stack before with gwt.

    Read the article

  • Is there such a thing as an IP femtocell, and what does it do?

    - by The Journeyman geek
    My dad mentioned a co-worker suggested using a device, that might use CDMA to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does exist, I'm wondering, if it's specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitrary Internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device doesn't exist, saying so might be a right answer ;)

    Read the article

  • How to generate an ASCII representation of a Unix file hierarchy?

    - by Jenn D.
    Hi, all. I'm looking for a quick and dirty way to generate some diagrams of some directories that have almost, but not exactly, the same hierarchy, so I can show them around at a meeting and we can decide which flavor we like best. I'm not interested in the "leaf" nodes, just the directories. The catch: I don't want to mess with X. This is a server system I deal with entirely through SSH. So I'm looking for something that will do ASCII layout, maybe with simple pipes-and-hyphens for lines or something. Does anyone know of such a utility? I'm sure I could write something myself, but it's such a fiddly little sort of project, with handling spacing and layout and such; I'd really like to discover that someone's done it for me. Alas, Google doesn't seem to know of such a thing...or if it does, it's hidden beneath heaps of excellent visual explications of the standard general Unix file hierarchy. Thanks!

    Read the article

  • My approach towards SEO implementation needs improvements. [closed]

    - by Eritrea
    I have always copy/paste this below code as a template for meta tags on project, but I think they are not effective as they could possible be. So, I need to know if there is anyway I can improve it. suppose I have a site called coop.com for a company called Coopm and we do import and export as a business in France. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html;charset=utf-8" /> <meta name="rpbots" content="index, follow" /> <meta name="description" content="ccop is a major import and export company" /> <meta name="keywords" content="coop, coop.com coop company, import export, import export france, " /> <meta name='REVISIT-AFTER' content='30 DAYS'> <title>coop is an import and export company located in France</title> </head> The reason I am asking, is because I want to know if there are better ways of constructing your SEO tags, and construction.

    Read the article

  • Welcome to the Red Gate BI Tools Team blog!

    - by BI Tools Team
    Welcome to the first ever post on the brand new Red Gate Business Intelligence Tools Team blog! About the team Nick Sutherland (product manager): After many years as a software developer and project manager, Nick took an MBA and turned to product marketing. SSAS Compare is his second lean startup product (the first being SQL Connect). Follow him on Twitter. David Pond (developer): Before he joined Red Gate in 2011, David made monitoring systems for Goodyear. Follow him on Twitter. Jonathan Watts (tester): Jonathan became a tester after finishing his media degree and joining Xerox. He joined Red Gate in 2004. Follow him on Twitter. James Duffy (technical author): After a spell as a writer in the video game industry, James lived briefly in Tokyo before returning to the UK to start at Red Gate. What we're working on We launched a beta of our first tool, SSAS Compare, last month. It works like SQL Compare but for SSAS cubes, letting you deploy just the changes you want. It's completely free (for now), so check it out. We're still working on it, and we're eager to hear what you think. We hope SSAS Compare will be the first of several tools Red Gate develops for BI professionals, so keep an eye out for more from us in the future. Why we need you This is your chance to help influence the course of SSAS Compare and our future BI tools. If you're a business intelligence specialist, we want to hear about the problems you face so we can build tools that solve them. What do you want to see? Tell us! We'll be posting more about SSAS Compare, business intelligence and our journey into BI in the coming days and weeks. Stay tuned!

    Read the article

  • Access - Force Form Refresh on New Record

    - by gamerzfuse
    Let me set the stage here a bit: I have an Access project with various buttons, triggers, macros, etc. I needed an Appointment Date field to only show when the button APPOINTMENT MADE is toggled ON. This works great. The problem arises when you submit a form with the APPOINTMENT MADE toggled. Once the record is inserted, the Access file clears all fields, but leaves the Appointment Date enabled, when it should be disabled by default. I have tried the Current, Load, Before Insert, After Insert and many other options on the FORM properties. Am I missing a simple way to force a refresh so the field goes back to it's default DISABLED? Thanks in advance!

    Read the article

  • Unity3d web player fails to load textures

    - by José Franco
    I'm having a problem with Unity3d Web Player. I have developed a project and succesfully deployed it in a web app. It works with absolutely no problem on my PC. This app is to be installed on two identical machines. I have installed them in both and it only works properly in one. The issue I have is on a computer it fails to properly load the models and textures, so the game runs but instead of the models I can only see black rectangles on a blue background. It has the same problem with all browsers and I get no errors either by the player or by JavaScript. The only difference between these computers is that one that has the problem is running on Windows 8.1 and the other one on Windows 8 only. Could this be the cause of the issue? It works fine on my computer with Windows 8.1. However both of the other computers have specs that are significantly lower than mine. I have already searched everywhere and it seems that it has to do with the individual games, however I think it may have to do with the computer itself because it runs properly in the other two. The specs on the computes I'm installing the app on are as follows: Intel Celeron 1.40 GHz, 2GB RAM, Intel HD Graphics If anybody could point me in the right direction I would be very grateful I forgot to mention, I'm running Unity Web player 4.3.5 and the version on the other two computers is 4.5.0

    Read the article

  • How long can you be out of the MS market before it affects your career [closed]

    - by dave
    I've been working with .Net since it first came out and have done my best to use the latest and greatest things from Redmond. That being said, I've been working for the past year in the Python/Unix/Web world. In order to keep myself relevant in the MS world, I've been working part-time on a WPF project but I do not know how much longer that work will continue. So my question is: If I were to move totally to the Unix/Python/Web world, how long could I stay there before it starts getting hard to get another MS job? I am trying not to burn bridges in my career as I've found MS jobs pay better and tend to be more plentiful. PS: I like my Python job since it is something new and I get to work from home. It has provided a different view on coding that I've found useful. EDIT: I was out of the MS market for 12 months before attempting to get another MS job. No-one said "Gee you've been gone a while" but I did get a conspicuous lack of responses to job applications. My feeling is that the head-hunters do not bother to look beyond your last job. In the end, I got employment via my own network rather than the pimps. So, to answer my question: "not long, especially if you trust your career to head hunters."

    Read the article

  • Subdomain still times out after set up a month ago

    - by user8137
    I'm a newbie on this and this has probably been asked already but the subjects online were close but too vague in there answers so I've probably really messed this up. I would really appreciate specific step by step instructions. This is what I'd like to do: use the subdomain www.high-res.domain.com to be accessed by external customers with specific permissions to access the site (like ftp). We use Network Solutions to house domain.com. We recently added a new ip address to point to www.high-res.domain.com. I gave the ip address to the company that hosts our website. I pinged www.high-res.domain.com and it points to the correct ip address but still times out. It’s been a few weeks now and when you ping it, it still times out. C:ping XXX.XXX.X.XXX Pinging XXX.XXX.X.XXX with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for XXX.XXX.X.XXX: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss). Tracert times out as well. I even went to DNS tools and a few other sites for checking this and it shows the same thing. I recently went into the DNSmgmt on our server (wink2k3sp1) and created an A record under the DomainDnsZones which translated to a Cname when you look at it. Under the Domain it has two entries one to the subdomain and the other to the website host each with separate ip addresses. Is this correct? The website people are too busy on another project to research it further and my friends haven't gotten back to me. Please help. Thanks KK

    Read the article

  • Organization standards for large programs

    - by Chronicide
    I'm the only software developer at the company where I work. I was hired straight out of college, and I've been working here for several years. When I started, eveeryone was managing their own data as they saw fit (lots of filing cabinets). Until recently, I've only been tasked with small standalone projects to help with simple workflows. In the beginning of the year I was asked to make a replacement for their HR software. I used SQL Server, Entity Framework, WPF, along with MVVM and Repository/Unit of work patterns. It was a huge hit. I was very happy with how it went, and it was a very solid program. As such, my employer asked me to expand this program into a corporate dashboard that tracks all of their various corporate data domains (People, Salary, Vehicles/Assets, Statistics, etc.) I use integrated authentication, and due to the initial HR build, I can map users to people in positions, so I know who is who when they open the program, and I can show each person a customized dashboard given their work functions. My concern is that I've never worked on such a large project. I'm planning, meeting with end users, developing, documenting, testing and deploying it on my own. I'm part way through the second addition, and I'm seeing that my code is getting disorganized. It's still programmed well, I'm just struggling with the organization of namespaces, classes and the database model. Are there any good guidelines to follow that will help me keep everything straight? As I have it now, I have folders for Data, Repositories/Unit of Work, Views, View Models, XAML Resources and Miscellaneous Utilities. Should I make parent folders for each data domain? Should I make separate EF models per domain instead of the one I have for the entire database? Are there any standards out there for organizing large programs that span multiple data domains? I would appreciate any suggestions.

    Read the article

  • Is there a better way to consume an ASP.NET Web API call in an MVC controller?

    - by davidisawesome
    In a new project I am creating for my work I am creating a fairly large ASP.NET Web API. The api will be in a separate visual studio solution that also contains all of my business logic and database interactions, Model classes as well. In the test application I am creating (which is asp.net mvc4), I want to be able to hit an api url I defined from the control and cast the return JSON to a Model class. The reason behind this is that I want to take advantage of strongly typing my views to a Model. This is all still in a proof of concept stage, so I have not done any performance testing on it, but I am curious if what I am doing is a good practice, or if I am crazy for even going down this route. Here is the code on the client controller: public class HomeController : Controller { protected string dashboardUrlBase = "http://localhost/webapi/api/StudentDashboard/"; public ActionResult Index() //This view is strongly typed against User { //testing against Joe Bob string adSAMName = "jBob"; WebClient client = new WebClient(); string url = dashboardUrlBase + "GetUserRecord?userName=" + adSAMName; //'User' is a Model class that I have defined. User result = JsonConvert.DeserializeObject<User>(client.DownloadString(url)); return View(result); } . . . } If I choose to go this route another thing to note is I am loading several partial views in this page (as I will also do in subsequent pages). The partial views are loaded via an $.ajax call that hits this controller and does basically the same thing as the code above: Instantiate a new WebClient Define the Url to hit Deserialize the result and cast it to a Model Class. So it is possible (and likely) I could be performing the same actions 4-5 times for a single page. Is there a better method to do this that will: Let me keep strongly typed views. Do my work on the server rather than on the client (this is just a preference since I can write C# faster than I can write javascript).

    Read the article

  • Ubuntu 9.10 + LXDE Error unmet dependencies

    - by skg
    I am working on Ubuntu 9.10 + LXDE as my current project. I am finding it difficult to install any new packages on this OS. For example, I need to install OpenCv package for qt webcam application, but every time it gives unmet dependencies error.And when i try to install dependencies it again show some more dependencies and so on and forms a circular loops. for example: sudo apt-get install libcv-dev .. .... The following packages have unmet dependencies: libcv-dev: Depends: libhighgui-dev (=1.0.0-6.2ubuntu1) but it is not going to installed. E: Broken packages Then I try to install libhighgui-dev as follow: sudo appt-get install libhighgui-dev .. ... The following packages have unmet dependencies: libhighgui-dev: Depends: libgtk2.0-dev but it is not going to installed E: Broken packages And this goes on never ending. Please suggest me something, as i have googled a lot and did not found any help. It may be , i m missing some primary packages to be installed.But how to find it? Any suggestion/help/link will be really appreciated. Thanks in Advance.

    Read the article

  • @CodeStock 2012 Review: Leon Gersing ( @Rubybuddha ) - "You"

    "YOU"Speaker: Leon GersingTwitter: @Rubybuddha Site: http://about.me/leongersing I honestly had no idea what I was getting in to when I sat down in to this session. I basically saw the picture of the speaker and knew that it would be a good session. I was completely wrong; it was the BEST SESSION of CodeStock 2012.  In fact it was so good, I texted another coworker attending the conference to get over and listen to Leon. Leon took on the concept of growth in the software development community. He specifically referred David Hansson in his ability to stick to his beliefs when the development community thought that he was crazy for creating Ruby on Rails. If you do not know this story Ruby on Rails is one of the fastest growing web languages today. In addition, he also touched on the flip side of this argument in that we must be open to others ideas and not discard them so quickly because we all come from differing perspectives and can add value to a project/team/community. This session left me with two very profound concepts/quotes: “In order to learn you must do it badly in front of a crowed and fail.” - @Rubybuddha I can look back on my career so far and say that he is correct; I think I have learned the most after failing, especially when I achieved this failure in front of other. “Experts must be able to fail.” - @Rubybuddha I think we can all learn from our own mistakes but we can also learn from others. When respected experts fail it is a great learning opportunity for the entire team as well as the person who failed. When expert admit mistakes and how they worked through them can be great learning tools for other developers so that they know how to avoid specific scenarios and if they do become stuck in the same issue they will know how to properly work their way out of them.

    Read the article

  • How to store 250TB of data and develop a backup/recovery plan?

    - by luccio
    I'm really new to this topic, so big apology for stupid questions. I have a school project and I want to know how to store 250TB of data with life-cycle for 18 months. It means every record is stored for 18 months and after this period of time can be deleted. There are 2 issues: store data backup data Due to amount of data I will probably need to combine data tapes and hard drives. I'd like to have "fast" access to 3 month old data, so ~42TB on disk. I really don't know what RAID should I use, or is here any better solution than combining disk and data tapes? Thanks for any advice, article, anything. I'm getting lost.

    Read the article

< Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >