Search Results

Search found 62161 results on 2487 pages for 'set difference'.

Page 696/2487 | < Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >

• some questions about raid card

  - by cpps

  I have some questions about raid card. Use LSI MegaRAID® SAS 9260-8i raid card as a example. There is only two connection ports on the raid card, and they provide two cables that can connect 8 SAS/SATA storages. The document say it can connect "Maximum 32 drives per controller", I want to know how can I connect more than 8 hard disks with this card. Is that they say "Eight internal SATA+SAS ports" means they provide two cables which can connect 8 hard drives, but you can use other way to connect Maximum 32 drives? The other question. I see host bus adapter has raid integrated , so what is the difference between host bus adapter and raid card. Are they the same? I also know is SAS/SATA Expander's function only to connect more hard drives? Thanks in advance.

  Read the article

• How to generate good serials for DNS zones with Puppet?

  - by Bittrance

  My tradition is to set all zone serials to the timestamp at modification. Now that Puppet is my new religion, I want to set serial timestamps when building zone files from exported resources. A somewhat trivialized example may look like this: file { "/tmp/dafile": content = inline_template("<%= Time.now.to_i %>"), } The problem with this approach is that content will be different all the time, which will (ultimately) provoke rebuilding of zone files on each puppet config poll. Is there some way I can insert a timestamp without it being included in the data that is compared against previous state?

  Read the article

• "Cannot allocate memory " error whle copying data from window to ubuntu

  - by John

  I have Ubuntu 9.10 installed inside VM of server 2008. WHen i try to copy the data from the network and paste insid ethe Ubuntu it says error called "Cannot allocate memory " I have 3GB RAM attached to the Ubuntu I tried above suggestion but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem???? I tried Set the following registry key to ’1': HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache and set the following registry key to ’3': HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem????

  Read the article

• Seeing DNS changes takes too long on my PC, can it be my router misconfiguration?

  - by Borek

  I administer a few sites and need to update their DNS entries from time to time, e.g., adding an A-record point certain subdomain to a certain IP. When I check sites like http://www.opendns.com/support/cache/, I can clearly see the DNS change taking effect throughout the world - is it just my PC that can't see this change (ping newsubdomain.example.org says it cannot resolve host name) The network "map" is like this: My PC -> my router -> my ISP's router -> internet On my PC, the DNS is set automatically which means that if I run iconfig /all, my router will be returned as the DNS server (192.168.1.1). On my router, the DNS is set to be what my ISP provided me with. Is this correct? What can I do to see new hostnames resolved quicker?

  Read the article

• why are CPUs so much more expensive in the UK than US?

  - by Nick Fortescue

  I'm looking at building my own PC. An Intel Core i7 960 3.2 Ghz is about £457 in the UK at various online retailers. In the US the price at newegg is $570 (this is about £380 at current exchange rates). 2 questions. 1) Why the difference (about 20%)? All I can think of is sales tax. 2) Am I right in assuming this is just a commodity part - if I ordered one from the US there is no reason it would be any different from one bought in the UK?

  Read the article

• Laptop Brightness in Gnome and /proc - Thinkpad W510

  - by hakre

  I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness

  Read the article

• Tcp window size won't go above 130048

  - by Roger

  I have 2 servers set up with about 80ms latency between them. Both are centos 6 and run a java app that transfers data from on location to another. Both are on 1gbps connections. I have been trying different sysctl settings and different send & receive buffer settings in java but no matter what I set them to, I cannot get the tcp window size to go above 130048 in the tcp dumps. This equates to roughly 13mbps which is the actual throughput I am getting.

  Read the article

• Can Visual Studio track the "size" or "severity" of my changes in TFS?

  - by anaximander

  I'm working on a sizeable project using VS2012 and TFS (also 2012, I think - I didn't set up the server). A lot of my recent tasks have required making very small changes to a lot of files, so I'm quite used to seeing a lot of items in my Pending Changes list. Is there a way to have VS and/or TFS track how much has been changed and let me know when the differences are becoming significant? Similarly, is there a way to quickly highlight where the major changes are when you get the latest version from TFS? It'd really help with tracking down where certain changes have been made without having to go through and compare every file - the difference highlighting tool might be nice, but when you have to use it on a dozen files to find the block you're looking for, you start to wonder if there's a faster way...

  Read the article

• Mediawiki create user error after migration

  - by ing0

  So I had a mediawiki installed on windows with MySQL (running on AWS RDS). I've since moved it to a debian server for various reasons, but I think I've messed up the database because of the different versions of mediawiki I have used. The windows install was v 1.20alpha (58f390e). The new debian install is v 1.15.5-2squeeze4. I've tried to update debian but it doesn't find an update, so is this the latest squeeze version? Everything seems to work ok except adding users. It gives me a database error so I ran php maintenance/update.php which ran some stuff OK but didn't make a difference. I think I've not done the correct approach to this sort of move, does anyone know of a better way of doing it? I still have the old wiki running - but not used - on windows (using the same database) so I could always try this again.

  Read the article

• RocketRaid gives me stuttering computer

  - by Dan

  I have a SANS DIGITAL TowerRAID TR8M-BP (with the RocketRaid 622 raid device) with 5 x SAMSUNG Spinpoint F4 HD204UI 2TB 5400 RPM SATA 3.0Gb/s harddrives in a raid 5. It connects via 2-esata cables. My drivers are up to date. When I'm writing data to the drives my computer stutters (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• is there a linux equivalent of iTerm(mac) sending command to multiple tabs functionality?

  - by jabbertalker

  in iTerm, you can send a command to execute simultaneously on a set of already opened tabs. Is there a way to do this in linux (with gnome-terminal preferably)? for instance, supposed that I had 10 tabs already ssh'd into [email protected] and sudoed to root and wanted to send a command to run on all 10 tabs. The goal of this is to be able to stay within a set of tabs and command them, rather than having to use expect scripts to ssh and elevate and run commands. Basically, like how you could do in iTerm.

  Read the article

• Why S3 website redirect location is not followed by CloudFront?

  - by ychaze

  I have a website hosted on Amazon S3. It is the new version of an old website hosted on WordPress. I have set up some files with the metadata Website Redirect Locationto handle old location and redirect them to the new website pages. For example: I had http://www.mysite.com/solution that I want to redirect to http://mysite.s3-website-us-east-1.amazonaws.com/product.html So I created an empty file named solutioninside my bucket with the correct metadata: Website Redirect Location= /product.html The S3 redirect metadata is equivalent to a 301 Moved Permanentlythat is great for SEO. This works great when accessing the URL directly from S3 domain. I have also set up a CloudFront distribution based on the website bucket. And when I try to access through my distribution, the redirect does not work, ie: http://xxxx123.cloudfront.net/solution does not redirect but download the empty file instead. So my question is how to keep the redirection through the CloudFront distribution ? Or any idea on how to handle the redirection without deteriorate SEO ? Thanks

  Read the article

• How to share datastores between multiple exchange servers?

  - by Johan

  I have an Exchange 2003 box that is seriously overstressed. I want to transfer its duties to a new and faster box. I don't cannot suffer downtime, so I have to do this stuff live. Here's what I plan to do: Install Exchange 2003 on the new server Set up the new server, so it will accept requests from users for their mailboxes I want to do as little manual set up as possible, because that 'll eat up my time and is too error prone Than I want to transfer my datastores one by one to the new server and have those users (once the datastore in the new server is up and running) to get their data from the new server (without them noticing) I don't have to transfer all the datastores, some of them need to stay on the old box (because I'm still waiting for extra HD space to arrive from the supplier) What steps do I need to follow to do this? The new box has never seen this domain before, the old exchange server is not the DC, we have a dedicated DC.

  Read the article

• How to stream multiple files on demand in VLC?

  - by romkyns

  Is there any way at all that I can set up VLC on a server PC in such a way that I can access a list of all my videos from another PC, and pick one to be streamed on demand? I've been pointed at this streaming guide (pdf), but it's pretty useless. For a start, most of the menus in those screenshots don't match the actual current version VLC, and then it sort of assumes you already know what you're doing. So far I managed to figure out how to stream a single file, which I must choose before watching on the server PC - pretty useless if you ask me! The impenetrable "UI" doesn't help either... (P.S. The reason I'm going for streaming rather than the very simple to set up network drive is described in this question)

  Read the article

• Restrict only some plugins to specific sites in Google Chrome

  - by Christian

  I am looking for a way to set up Google Chrome so that it will run a certain plug-in (Java, what else?) only on whitelisted sites, but other plug-ins (like the PDF viewer) everywhere. From playing with the policies available for Chrome, I think there are basically two levels of plug-in management: List of disabled plugins/enabled plugins: Controls whether a plug-in exists for the browser at all This pair of policies applies to plug-ins, but not to sites. Default plug-in settings/Allow plug-ins on sites: Controls on which sites plug-ins can run This set of policies applies to sites, but not to individual plugins, and it cannot override the first pair. There appears to be no way to configure Chrome so that some plug-ins only run on whitelisted sites, but others run everywhere by default. I have also looked at filtering content on the firewall/proxy level, but I'm not convinced it can be done securely there. Filtering by URLs (file names) or content types can be circumvented trivially, and identification by content inspection cannot be safe either.

  Read the article

• Windows Desktop Randomly Switches Resolution

  - by bobber205

  Once per log in a specific account, Windows XP is switching to 800x600 and 8 (looks like) bit color. It then after a few seconds switches back to the regular settings. This, so far, has only happened, once per log in session but it is becoming very annoying for the end user. :P Any ideas? I've tried turning off hardware acceleration as well as getting rid of her picture desktop wallpaper but nothing has made a difference. Thanks for any help!

  Read the article

• What's the easiest way to move from one Macintosh to another?

  - by schnapple

  Here's the story: Company bought me a $599 Mac mini (as of this writing, 2.26GHz/160GB HD/2GB RAM) I have it set up to some extent with software for development Company decides it needs a second Mac for QA I convince company to buy the $799 Mac mini for the second machine (as of this writing, 2.53GHz/320GB HD/4GB RAM), let me have it for development, and let QA have the $599 Mac mini Company does just that, now I have both So, what's the best way to move from one of these to the other? Just set up everything on the second one and be done with it? Can I transfer things from the first to the second somehow? I'm running Time Machine backups to an external drive on the $599 Mac mini, if that helps. Also both of these will be on the network at the same time, other than renaming one of the machines are there considerations to be had there?

  Read the article

• Dual boot centOS and Win7

  - by user1855965

  I posted this on stackoverflow, but it looks like superuser would be more appropriate. I have a CentOS 5 machine that runs Windows 7 as a dual boot. CentOS is the main OS and each OS is set up in a specific hard drive. This was set up before I joined the company and I don't really have need to run Windows now. My question is: can I, from CentOS, reformat the Windows HD, change GRUB settings and get the HD to be available on CentOS? Happy to provide more info if this helps. Many thanks for your help and apologies if this is a very simple issue... I don't want to blindly test things on this machine as it is used on a daily basis by several users.

  Read the article

• ubuntu boots into gnu grub 1.99

  - by greenish

  I've tried set root=(hd0,2) chainloader +1 boot set root=(hd0,2) linux /boot/vmlinuz... and the loopback (loop0) /ubuntu/disks/root.disk command etc. When I try the boot command it tells me there's no kernel and when I boot Win7 (it's a dual boot) the root.disk says 0kb. nothing boots from the live usb I've made and I've tried to use programs to mount the partitions to no effect - they only show me what's on my windows file drives. I've got some really important docs on the linux harddrive I need to get to. any ideas?

  Read the article

• pc dont work at full speed

  - by kubilas

  motherboard gigabyte GA-8I915PL-G, pentium 4 630 3,0 ghz dont run at default speed ; fsb 800, cpu host 200, cpu 3000 mhz but run some time at fsb 533 cpu host 133 cpu 2025 mhz some time at fsb 75 and cpu 1128 mhz only. when i set in easy tune default parametrs pc dont work. some time i clear cmos and i can set in bios default parametrs, some time clearing cmos dont help, bios i update. how i can fix this problem? sorry about my bad english.

  Read the article

• How can I stream video from my XP sp3 desktop to my win 7 laptop?

  - by Robb

  I would like to stream media from my XP sp3 desktop to my Win7 laptop. I currently have Windows Media Player 11 on both machines. The XP one is set up for the media sharing service as far as I can tell. I have also set the 'Play To' option to my Win 7 machine on the XP WMP. However, the only way I've been able to 'stream' is to simply tell my Win7 WMP to add a network folder to its libraries. This seems to work over the wifi but it does stutter a touch, even with a 20 second buffer. The stuttering also appears randomly, maybe 4-5 times during a 22 minute show. I feel like I'm doing something wrong. Is this setup OK or am I missing something?

  Read the article

• ionice idle is ignored

  - by Ferran Basora

  I have been testing the ionice command for a while and the idle (3) mode seems to be ignored in most cases. My test is to run both command at the same time: du <big folder> ionice -c 3 du <another big folder> If I check both process in iotop I see no difference in the percentage of io utilization for each process. To provide more information about the CFQ scheduler I'm using a 3.5.0 linux kernel. I started doing this test because I'm experimenting a system lag each time a daily cron job updatedb.mlocate is executed in my Ubuntu 12.10 machine. If you check the /etc/cron.daily/mlocate file you realize that the command is executed like: /usr/bin/ionice -c3 /usr/bin/updatedb.mlocate Also, the funny thing is that whenever my system for some reason starts using swap memory, the updatedb.mlocate io process is been scheduled faster than kswapd0 process, and then my system gets stuck. Some suggestion? References: http://ubuntuforums.org/showthread.php?t=1243951&page=2 https://bugs.launchpad.net/ubuntu/+source/findutils/+bug/332790

  Read the article

• How can I use sudo when I logged in with a SSH key in PuTTY?

  - by Alex

  I know the title probably doesn't even make sense, but anyway. I downloaded PuTTY and set it up, and followed this tutorial to set up SSH keys so I don't have to input a user or password when logging in with SSH. I noticed that when I made a new user I used the --disabled-password parameter, since I wouldn't be needing it... but now when I give the user sudo powers I can't proceed as it asks me for the user's password, and I don't have one. What do I do?

  Read the article

• Windows Home Server restore causes computer to be removed from the domain?

  - by unknown (google)

  I restored my Dell M4400 that is a company laptop, and now I get an error when I try to log on and am connected to our corporate network, which says that the domain controller could not be found or that the computer is not part of the domain. Everyone else can log on, so it seems my computer is no longer part of the domain, even though it thinks it is per the settings. One thing of note: my computer crashed on 1/14/10, but I restored from a backup that was made on 12/20/09. So I am not sure if that made a difference? Also, I tried running "gpupdate" to update my group policy, but that did not seem to help. Any ideas? Seems like a bit of a flaw in the backup system for computers that are part of a domain. I guess I wanted to hear from someone with more knowledge about how a computer is recognized as part of a domain to know if this should be expected when doing a restore or if I should file a trouble ticket.

  Read the article

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

< Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >