Search Results

Search found 24675 results on 987 pages for 'table'.

Page 696/987 | < Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >

  • Setting up shared connection

    - by Calvin Froedge
    I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

    Read the article

  • Free NOSQL database for use with C# client [closed]

    - by Mitten
    I've never used NOSQL databases before, but so far it seems like the best data storage solution for my project. I am going to implement a datamining application. The data I would like to mine is thousands of documents which cannot be imported into datamining applications. To make to import easier and faster (than importing thousands of documents) I am planning to import these documents into a NOSQL database first and when import NOSQL database into datamining software. At the very least once I have all the data in NOSQL database I should be able to code simplest datamining logic myself. Am I correct that NOSQL databases allow to creates records of data, but they don't mandate all the records to adhere to the same data schema (same column names/types in a classic table oriended SQL databases)? I think for each document I would create a row/entry/object (not sure what is the correct term is in use in NOSQL world) which would be a string id, few (columns) with unstructured text data, and a dozens of columns mostly of datetime and integer types. From its name NOSQL does not support SQL query syntax, but it support locating the object(row/entry?) by its unique id. Does NOSQL support qyuering objects using property=value syntax? Unfortunately most of free NOSQL db only support Java/C++ clients, which free NOSQL db would you recommend for a C# programmer?

    Read the article

  • SQL Server 2005 Agent running SSIS job can't find file path

    - by alimack
    Basically I'm trying to run a functioning SSIS job (created in BIDS) under the SQL Server Agent - it reads a set of Excel spreadsheets and dumps the results into a table. The problem I'm having is getting the SSA to read the file path, the relevant part of the error is: "0x80004005 Description: "'N:\Assets Property & Facilities Management\Monthly Absence.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides." I've tried using UNC paths (\servername\ share) but the BIDS rewrites the paths to standard file paths (c:\directory\filename), I've also tried a proxy which runs this step under an Admin account. I've also tried changing the path to UNC on the SSIS job on the server. Also I'm forcing it to use the 32 bit DTEXEC, so it's not that either Always get the same error, do I need to re-create the job from scratch?

    Read the article

  • Organizing Connections with Folders in Oracle SQL Developer

    - by thatjeffsmith
    How many Oracle databases do you work with on a regular basis? I’m guessing the answer for most of you lies between 1 and 500. This post is really geared for those of you who deal with more than just a handful (5) of database connections. Filters are nice when you need to work with a subset of table data, or even a list of tables. So why wouldn’t they be just as useful for organizing your connections? Here’s my complete list of databases: The folders aren’t there by default, you add them as you need them. Now this isn’t an overly large connection list. But when I need to fire up an impromptu demo for a customer, it’s very nice to be able to drill down into JUST those ‘safe’ environments. This actually saves me a few seconds every time I need to connect to one of my databases. So while it’s a very simple feature, it’s one of those things that I recommend EVERYONE take advantage of as it will save them hours of time over the long haul. Easier to find means I get to work a few seconds faster. This also helps me from making mistakes in ‘production’ environments! How to Add a Connection Folder Select a connection you want to organize. Mouse-right-click, and choose ‘Add to folder.’ You can throw it into a new container or an existing one. Lather, rinse, and repeat as necessary. The only trick is remembering to right-click! Special thanks to @dresendi for today’s topic! He asked how to do this and I realized I hadn’t blogged the topic yet

    Read the article

  • CodePlex Daily Summary for Tuesday, December 21, 2010

    CodePlex Daily Summary for Tuesday, December 21, 2010Popular ReleasesSQL Monitor - tracking sql server activities: SQL Monitor 3.0 alpha 7: 1. added script save/load in user query window 2. fixed problem with connection dialog when choosing windows auth but still ask for user name 3. auto open user table when double click one table node 4. improved alert message, added log only methodOpen NFe: Open NFe 2.0 (Beta): Última versão antes da versão final a ser lançada nos próximos dias.EnhSim: EnhSim 2.2.6 ALPHA: 2.2.6 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Fixing up some r...LINQ to Twitter: LINQ to Twitter Beta v2.0.18: Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation. Bug fixes.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4.3: Helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: Improvements for confirm, popup, popup form RenderView controller extension the user experience for crud in live demo has been substantially improved + added search all the features are shown in the live demoGanttPlanner: GanttPlanner V1.0: GanttPlanner V1.0 include GanttPlanner.dll and also a Demo application.N2 CMS: 2.1 release candidate 3: * Web platform installer support available N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) A bunch of bugs were fixed File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the templ...TweetSharp: TweetSharp v2.0.0.0 - Preview 6: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numer...Team Foundation Server Administration Tool: 2.1: TFS Administration Tool 2.1, is the first version of the TFS Administration Tool which is built on top of the Team Foundation Server 2010 object model. TFS Administration Tool 2.1 can be installed on machines that are running either Team Explorer 2010, or Team Foundation Server 2010.Hacker Passwords: HackerPasswords.zip: Source code, executable and documentationSubtitleTools: SubtitleTools 1.3: - Added .srt FileAssociation & Win7 ShowRecentCategory feature. - Applied UnifiedYeKe to fix Persian search problems. - Reduced file size of Persian subtitles for uploading @OSDB.Facebook C# SDK: 4.1.0: - Lots of bug fixes - Removed Dynamic Runtime Language dependencies from non-dynamic platforms. - Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample - Changed internal serialization to use Json.net - BREAKING CHANGE: Canvas Session is no longer support. Use Signed Request instead. Canvas Session has been deprecated by Facebook. - BREAKING CHANGE: Some renames and changes with Authorizer, CanvasAuthorizer, and Authorization ac...NuGet (formerly NuPack): NuGet 1.0 build 11217.102: Note: this release is slightly newer than RC1, and fixes a couple issues relating to updating packages to newer versions. NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (h...WCF Community Site: WCF Web APIs 10.12.17: Welcome to the second release of WCF Web APIs on codeplex Here is what is new in this release. WCF Support for jQuery - create WCF web services that are easy to consume from JavaScript clients, in particular jQuery. Better support for using JsonValue as dynamic Support for JsonValue change notification events for databinding and other purposes Support for going between JsonValue and CLR types WCF HTTP - create HTTP / REST based web services. This is a minor release which contains fixe...LiveChat Starter Kit: LCSK v1.0: This is a working version of the LCSK for Visual Studio 2010, ASP.NET MVC 3 (using Razor View Engine). this is still provider based (with 1 provider Sql) and this is still using WebService and Windows Forms operator console. The solution is cleaner, with an installer to create tables etc. You can also install it via nuget (Install-Package lcsk) Let me know your feedbackOrchard Project: Orchard 0.9: Orchard Release Notes Build: 0.9.253 Published: 12/16/2010 How to Install OrchardTo install the Orchard tech preview using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard-Using-Web-PI.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.0.9.253.zip file. The zip contents are pre-built and ready-to-run. Simply extract the contents of the Orch...DotSpatial: DotSpatial 12-15-2010: This release contains a few minor bug fixes and hopefully the GDAL libraries for the 3.5 x86 build actually built to the correct directory this time.DotNetNuke® Community Edition: 05.06.01 Beta: This is the initial Beta of DotNetNuke 5.6.1. See the DotNetNuke Roadmap a full list of changes in this release.MSBuild Extension Pack: December 2010: Release Blog Post The MSBuild Extension Pack December 2010 release provides a collection of over 380 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...Silverlight Contrib: Silverlight Contrib 2010.1.0: 2010.1.0 New FeaturesCompatibility Release for Silverlight 4 and Visual Studio 2010New Projectsaqq2: aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2aqq2Cameleon CMS: Caméléon, le CMS open-source le plus simple d'utilisation sur le marché.Dail Emulator: Dail Emulator is a software that emulates the server software of Aeonsofts game FlyFF. Specifically made for the now defunct version 6 of the game.Dmitry Lyalin's WP7 Sample Application: A project where im putting all my public samples in a single WP7 client test applicationElixir: DotNetNuke module test framework. Use this DLL to write concise, to-the-point tests for your modules that can target multiple DNN platforms and multiple browsers.FlightTableEditor: This edits the Flight and Healing Tables of Pokémon Fire Red and Pokémon Leaf Green.Genetico UNLaM: Algoritmo Genetico UNLaMHelpCentral HelpDesk Ticket Application: An open-ended framework and client for a helpdesk ticket application and bug tracker. Built to be as extensible and available as possible, the central system is a WCF webservice which can be accessed by any client application.Import Media for Umbraco: This package allows you to import multiple or large files that have been uploaded to the server via FTP or other means. A new media item is created in the media tree and the media is moved from the upload location to the new directory for the media item.LargeCMS full sample (How to call CryptMsg API in streaming mode): LargeCms implements SignedLargeCMS and EnvelopedLargeCMS classes, my own version of .NET SignedCms and EnvelopedCMS to work with large data. It shows a way to call CryptMsg API in streaming mode to overcome the limitations of current .NET classesLinq.Autocompiler: Adds runtime, on demand compilation of Linq queries (in Linq to SQL), which creates CompiledQuery instances and stores them in a cache. Mathetris: it's a game.MonoWiimote: Managed c# library for using Wii Remote device under Mono/Linux enviroment. It requires libcwiimote-0.4 (sudo apt-get install libcwiimote-0.4).Movie Captor: Concorrendo no Desafio .NETNSpotifyLib: A .NET library contains wrapper classes for the Spotify Metadata API. http://developer.spotify.com/en/metadata-api/overview/ This library supports searching for artists, albums and tracks by using the Spotify Metadata API. In the future I'll add support for Lookups as well.Silverhawk: It's developed in C# programming language.SimpleSpy: Detecting object handle on cursor move and get its information. Basically this is a bare bone program for detecting object handle at cursor and add your own logic to detect for further information. SunburnJitter: JitterSunburn contains helper classes and methods to use the jitter physics engine easier in your sunburn projects. Simple component based shapes will provide easy editing in editor. It's developed in C#.Sunrod: Sunrod is a .NET wrapper for the Obsidian Portal API.TouchStack - A MonoTouch ServiceStack.NET client: TouchStack makes it easier for MonoTouch developers to consume Web services created and exposed by the brilliant ServiceStack.NET webservice framework. TouchStack is written in C# and uses the MonoTouch library.VNTViewer: Viewer for notes/memos (VNT files)VpNet: Official .NET Wrapper for Virtual Paradise.xlGUI: Streamlet GUI Framework

    Read the article

  • Implement Budget Allocation in DAX for Power Pivot and Tabular #powerpivot #tabular #ssas #dax

    - by Marco Russo (SQLBI)
    Comparing sales and budget, or costs and budget, is a very common operation. However, it is often the case that you have different granularities for different tables containing budget and the data to compare with. There are two ways to do that: you can limit the comparison to the granularity that is common to the two tables, or you can allocate the budget where it’s not defined. For example, if you have a budget defined by quarter and category, you might want to allocate it by month and product. In this way, you will do the comparison as you had a more granular definition of the budget, without actually having to do the manual job of allocating data (usually in an Excel worksheet!). If you want to do budget allocation in DAX, you can use the Budget Patterns we published on DAX Patterns. If you come from and MDX/OLAP background, at first you might find it hard to solve the problem of not having attribute hierarchies that helps you in propagating the budget values to lower hierarchical levels. However, I think that once you get used to DAX, you will find the behavior very predictable and easy to “debug” also for more complex allocation formula. You just have to be careful in writing the DAX formula, but probably the pattern we wrote should help you designing the right data model, without creating physical relationships to the budget table! This pattern is also based on the Handling Different Granularities scenario I discussed a couple of weeks ago.

    Read the article

  • Redirecting wildcard emails to one email with postfix

    - by Burning the Codeigniter
    I'm creating a bounce email system where emails can reply to messages on my site. However when the emails are sent to the user containing the previous message, the Reply-To field contains an email something like this [email protected] (which contains the ID at the end). If the user replies, the reply message will be sent back to [email protected] which of course, doesn't have its own mailbox, except the [email protected]. How would I redirect all incoming messages coming from a specific wildcard notification-message-*@mysite.com to [email protected]? I did some research, but no solid part worked, including the luser_relay = [email protected] and putting notification-message-* in the postfix aliases table, the notification@ has a Maildir, so the emails would go into it. I am using Ubuntu 11.04.

    Read the article

  • iptables port forwarding troubleshooting

    - by cbmanica
    I'm trying to forward connections on port 18600 to port 9980. I have this in /etc/sysconfig/iptables: # Generated by iptables-save v1.3.5 on Mon Oct 21 18:30:43 2013 *nat :PREROUTING ACCEPT [2:280] :POSTROUTING ACCEPT [12:768] :OUTPUT ACCEPT [12:768] -A PREROUTING -p tcp -m tcp --dport 18600 -j REDIRECT --to-ports 9980 COMMIT # Completed on Mon Oct 21 18:30:43 2013 and /etc/init.d/iptables status shows me this: Table: nat Chain PREROUTING (policy ACCEPT) num target prot opt source destination 1 REDIRECT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:18600 redir ports 9980 However, I can telnet from localhost to port 9980, but not 18600. What am I missing? (This is a CentOS-based VM.)

    Read the article

  • Database Schema Usage

    - by CrazyHorse
    I have a question regarding the appropriate use of SQL Server database schemas and was hoping that some database gurus might be able to offer some guidance around best practice. Just to give a bit of background, my team has recently shrunk to 2 people and we have just been merged with another 6 person team. My team had set up a SQL Server environment running off a desktop backing up to another desktop (and nightly to the network), whilst the new team has a formal SQL Server environment, running on a dedicated server, with backups and maintenance all handled by a dedicated team. So far it's good news for my team. Now to the query. My team designed all our tables to belong to a 3-letter schema name (e.g. User = USR, General = GEN, Account = ACC) which broadly speaking relate to specific applications, although there is a lot of overlap. My new team has come from an Access background and have implemented their tables within dbo with a 3-letter perfix followed by "_tbl" so the examples above would be dbo.USR_tblTableName, dbo.GEN_tblTableName and dbo.ACC_tblTableName. Further to this, neither my old team nor my new team has gone live with their SQL Servers yet (we're both coincidentally migrating away from Access environments) and the new team have said they're willing to consider adopting our approach if we can explain how this would be beneficial. We are not anticipating handling table updates at schema level, as we will be using application-level logins. Also, with regards to the unwieldiness of the 7-character prefix, I'm not overly concerned myself as we're using LINQ almost exclusively so the tables can simply be renamed in the DMBL (although I know that presents some challenges when we update the DBML). So therefore, given that both teams need to be aligned with one another, can anyone offer any convincing arguments either way?

    Read the article

  • Upgraded to 13.10 now clock settings are all disabled and clock does not display

    - by kervin
    I've upgraded to 13.10 and now I don't have the standard menu clock, which I need for work. I checked and 'indicator-datetime' is installed. I even uninstalled/reinstalled that applet with no luck. Also my "clock" settings under System Preferences are all disabled. I can't change anything. Does anyone know how I can get the old menu clock back? Alternatively is there another menu clock app I can download? Thanks for the responses I've restarted several times and that didn't fix the issue. I just ran the 13.10 update today. But I ran it again a few minutes ago. I got about 200KB in random updates. The issue is still present after a reboot. # apt-cache policy indicator-datetime indicator-datetime: Installed: 13.10.0+13.10.20131016.2-0ubuntu1 Candidate: 13.10.0+13.10.20131016.2-0ubuntu1 Version table: *** 13.10.0+13.10.20131016.2-0ubuntu1 0 500 http://us.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages 100 /var/lib/dpkg/status

    Read the article

  • MS Exchange -- running code against outbound email

    - by user32680
    I would like to know if using MS Exchange there is a way to run code against outbound emails. The code would need to trigger on emails sent to a specific domain, connect to a database, check for an email related to the email sent, and Carbon-copy that email to the related email. What I'm trying to do: When [email protected] gets an email, his auditor [email protected] gets CC'd. Jack is in a MSSQL DB table related to his auditor's email. Are there any samples of things like this being done?

    Read the article

  • Recover RAID 5 data after created new array instead of re-using

    - by Brigadieren
    Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

    Read the article

  • Can't boot Ubuntu 12.04 from external Hard Drive using Mac

    - by Catgirl the Crazy
    Recently, I upgraded the RAM and hard drive on my Early 2008 Macbook to improve the performance. Rather than throw away the old hard drive, I bought an enclosure for it to turn it into an external hard drive, and, since all the data was migrated to my new drive, I decided to install Ubuntu on it for funsies (note: I am a near-total Ubuntu n00b). My first attempt to install Ubuntu didn't work (it gave me errors about not being able to find the BIOS or something), but my second attempt finished successfully (can't remember what, if anything, I did different). However, when I plug the external drive into my Macbook, it gives me a message saying it can't read the disk. Moreover, when I go into the Startup Manager (i.e.: what you get when you turn on the Macbook while holding the option key), the external drive is not one of the available startup disks. I thought this might be because I have an older Macbook, so I tried booting it with my mom's Late 2011 Macbook, and got the same results. Then I tried booting it through my dad's Dell laptop that runs Windows 7, and that time it worked. This is really counter intuitive to me, since the hard drive originally came from a Macbook, so if anything you'd think it would be less compatible with the Windows laptop than the Macbook. In case it helps, here's a link to a picture of how I set up the partition table while doing the install (not shown there is the fact that I checked the "Format?" box next to the /boot partition, since it gave me a warning when I tried to continue the installation without doing so) Anyone have any clue at all? If it helps, the hard drive I'm using is a 120GB 5400-rpm Serial ATA hard disk drive.

    Read the article

  • What's constitute an entry on the IPTables and how to find out which client it is originated from

    - by cbd
    I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

    Read the article

  • How to deal with colleagues refuse to follow practices?

    - by Adrian Shum
    I was discussing with another colleague about what we should be used when an DB entity is referring to another. I don't think there is any good reason to break the practice of putting the Primary Key in the referring entity. However, one of my colleague says: "You should use a surrogate key in the entity, but it is better to put the human-readable natural key in the referring entity. As long it is unique, it is fine and it is easier when you are doing support or maintenance job" I know it will works, but obviously it is not a good practice you are putting a non-PK unique column as "foreign key", just for gaining a bit of ease in writing SQL during support as we can have less table join. Though I mentioned the his approach is conceptual incorrect, and causing problem too practically etc, he seems rather trade off correctness in data model in exchange of ease of maintenance. And he said: "I know it is not good practice, but good practice is not golden rule" Honestly I feel frustrated when dealing with something like this. I know there are always case that we should break some rule or practice, but doubtless it is not such case now. What will you when you are facing situation like this? Please assume yourself being a senior developer which is expected to contribute in misc development direction and convention.

    Read the article

  • SQLServer 2008 FailOver and Load Balancing

    - by Jedi Master Spooky
    I have a project with a 2TB database ( 450.000.000 rows). I need to provide to the proyect a solution that gives FailOver and load Balacing, what do you recommend? We are going to use a NetApp Filer for the Data Files and for the File System of the Proyect. I read that SQl Clustering does not provide load balacing. If I cannnot have this feature and I have to go only to the FailOver what Server ( I presume that the key feature here is memory) would you recomend. We are adding 1.000.000 rows a day. Once the rows is inserted we are doing a lot of updates to that row for about 1 week then the row get static. Because of this I am thinking in some kind of history table or database or something like that. I am open to the Os servers implementation, I was thinking of a windows 2008 server with cluster but this depend of the database solution

    Read the article

  • Combo/Input LOV displaying non-reference key value

    - by [email protected]
    Its a very common use-case of LOV that we want to diplay a non key value in the LOV but store the key value in the DB. I had to do the same in a sample application I was building. During implementation of this, I realized that there are multiple ways to achieve this.I am going to describe each of these below.Example : Lets take an example of our classic HR schema. I have 2 tables Employee and Department where Dno is the foreign key attribute in Employee that references Department table.I want to create a LOV for Deparment such that the List always displays Dname instead of Dno. However when I update it, it it should update the reference key Dno.To achieve this I had 3 alternative1) Approach 1 :Create a composite VO and add the attributes from Department into Employee using a join.Refer the blog http://andrejusb.blogspot.com/2009/11/defining-lov-on-reference-attribute-in.htmlPositives :1. Easy to implement and use.2. We can use this attribute directly in queries defined on new attribute i.e If i have to display this inside query panel.Negative : We have to create an additional Join on the VO.Ex:SELECT Employees.EMPLOYEE_ID,        Employees.FIRST_NAME,        Employees.LAST_NAME,        Employees.EMAIL,        Employees.PHONE_NUMBER,       Department.Dno,        Department.DnameFROM EMPLOYEES Employees, Department Department WHERE Employees.Dno = Department .Dno2) Approach 2 :

    Read the article

  • different data with same title and keywords

    - by Junaid Saeed
    here is my scenario i have a website where i redirect my users basing upon the device they were using, lets say a user is visiting from an iPad, i take him directly to the page of iPad wallpapers, the user selects iPad version & i take the user to the gallery of wallpapers where the user can select & download any wallpaper. Every wallpaper is the required resolution, i have my reasons for doing this, now the thing is there are diff. resolution. versions of an image appearing one 5 diff. sections of my website, each having their own view page Now there is only one record in db.table for the image, and basing on the my consistent naming convention of the images, i pick the required image. this means when 5 different pages are generated in 5 categorized sections of the website, due to a shared DB record, the keywords, the titles and every single detail of the 5 pages is same besides the resolution of the image, and the section specific details that the page has and yeah the pages also have different paths like wallpapers.com\ipad-1\cars\Ferrari-dino.html wallpapers.com\ipad-2\cars\Ferrari-dino.html wallpapers.com\ipad-3\cars\Ferrari-dino.html wallpapers.com\ipad-4\cars\Ferrari-dino.html wallpapers.com\ipad-5\cars\Ferrari-dino.html now this is my scenario, How do Search Engines see it and how do they rank it? Is it a Good or Normal or Bad SEO practice? If bad how dangerous it is for my sites SEO? i need your comments on my scenario.

    Read the article

  • Simple ADF page using BAM Data Control

    - by [email protected]
    var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-15829414-1"); pageTracker._trackPageview(); } catch(err) {} Purpose : In this blog I will walk you through very simple steps to create an ADF page using BAM data control connection.Details : Create the projectOpen JDeveloper (make sure you have installed the SOA extension for JDev)Create new Application using "Generic Application" template.Click on "Next"Shuttle  "ADF Faces" to right pane for the project technology.Click "Finish"Create a BAM connectionIn the resource palette click on "Folder->New Connection -> BAM"Enter the connection name and click "Next"Enter Connection details Click on "Test connection" and "Finish"Create the BAM Data Control Open the IDE connection created in above step.Drag and drop "Employees" to "Data controls" palette.Select "Flat Query" and Click "Finish".Create the View Create a new JSF page.From Data control Panel drag and drop "Employees->Query->ADF Read Only table"Right click and Run the page.

    Read the article

  • Optimizing MySQL -

    - by Josh
    I've been researching how to optimize MySQL a bit, but I still have a few questions. MySQL Primer Results http://pastie.org/private/lzjukl8wacxfjbjhge6vw Based on this, the first problem seems to be that the max_connections limit is too low. I had a similar problem with Apache initially, the max connection limit was set to 100, and the web server would frequently lock up and take an excruciatingly long time to deliver pages. Raising the connection limit to 512 fixed this issue, and I read that raising the connection limit on MySQL to match this was considered good practice. Being that MySQL has actually been "locking up" recently as well (connections have been refused entirely for a few minutes at a time at random intervals) I'm assuming this is the main cause of the issue. However, as far as table cache goes, I'm not sure what I should set this as. I've read that setting this too high can hinder performance further, so should I raise this to right around 551, 560, 600, or do something else? Lastly, as far as raising the join_buffer_size value goes, this doesn't even seem to be included in Debian's my.cnf file by default. Assuming there's not much I can do about adding indexes, should I look into raising this? Any suggested values? Any suggestions in general here would be appreciated as well. Edit: Here's the number of open tables the MySQL server is reporting. I believe this value is related to my question (Opened_tables: 22574)

    Read the article

  • DB2 users and groups

    - by Arun Srini
    Just want to know everyone's experience and take on managing users/authentication on a multi-node db2 cluster with users groups. I have 17 apps in production (project based company, only 2 online apps), and some 30 users with 7 groups. prodsel - group that has select privilege on all tables produpdt - update group on selective tables (as required by the apps) proddel - delete prodins - insert permissions for the group Now what my company does is when an app uses certain user (called app1user), and needs select and insert privilege on a table, they 1. grant select and insert for prodsel, prodins respectively 2. add the user under those two groups... now this creates one to many relationship between user and privileges, and this app1user also gets select on other tables granted for the prodsel group. I know this is wrong. Before I explain, I need to know how this is done elsewhere. Please share your experiences, even if you use other Databases that uses OS level authentication.

    Read the article

  • Xen and HyperVM build question on os template

    - by Levi De Haan
    I recently built a server with hypervm and xen, now i know xen from command line, but hypervm ties into our whmcs and so its a requirement, however my question is this, when i build a new o/s template my partition table is gone, and i know why, but i was wondering if anyone has built anything in hypervm for adding in partition tables, so i dont have to reinvent the wheel :). i can do it command line in the created vm with fdisk, and i have tracked down the creation scripts for hypervm but i am unsure if these insert directly into the machine as it looks like a lot of the things it does are externalized and are for xen to assign things like ip address etc.. oh and on an aside when i go in to modify the .cnf file to change the boot disk from cdrom to drive on windows when i boot using hypervm it overwrites my setting again..frustrating as heck, i've been trying to track down where in the code it does this, has anyone else had this problem and if so how did you fix it if you did?

    Read the article

  • Xen and HyperVM build question on os template

    - by Levi De Haan
    I recently built a server with hypervm and xen, now i know xen from command line, but hypervm ties into our whmcs and so its a requirement, however my question is this, when i build a new o/s template my partition table is gone, and i know why, but i was wondering if anyone has built anything in hypervm for adding in partition tables, so i dont have to reinvent the wheel :). i can do it command line in the created vm with fdisk, and i have tracked down the creation scripts for hypervm but i am unsure if these insert directly into the machine as it looks like a lot of the things it does are externalized and are for xen to assign things like ip address etc.. oh and on an aside when i go in to modify the .cnf file to change the boot disk from cdrom to drive on windows when i boot using hypervm it overwrites my setting again..frustrating as heck, i've been trying to track down where in the code it does this, has anyone else had this problem and if so how did you fix it if you did?

    Read the article

  • Resize primary partition

    - by telebog
    I have a hdd with the folowing partition table 12Gb Primary Partition (ntfs) 140Gb Extended Partition (ntfs) I want to install windows 7 and I need more space for the Primary Partition. The problem is that when I resize partitons I obtain: 12Gb Primary Partition (ntfs) 110Gb Extended Partition (ntfs) 30Gb Free Space So I can't allocate the free space to primary partition because the free space is at the end of the disk. Is there a solution to extend the primary partition as: 42Gb Primary Partition (ntfs) 110Gb Extended Partition (ntfs) without repartitioning the entire disk? I used partition magic, gparted-live-0.4.6-4 and others with no success. With the Disk Management from Vista I manage to extend primary partition, but made my partitions dinamic.

    Read the article

  • Any good PostgreSQL client for linux?

    - by senotrusov
    stackoverflow points me "belongs-on-serverfault" on this, so crossposting. I am frustrated of not having a good Linux GUI administration and development tool for PostgreSQL. pgAdmin III is buggy and unusable piece of... hmm, software, compared to Windows-only PostgreSQL Maestro and EMS PostgreSQL manager. phpPgaAmin does not looks promising. EMS PostgreSQL manager can work under Wine, but such setup have a number of issues. Requirements are: Table data editing and browsing for large tables (1M+), able to jump by FK or some master-slave editing, GUI filtering and so on. ER diagrams with in-place schema editing Schema editing and browsing with all useful GUI support Schema changes log to put into DB versioning (migrations script). Tabbed interface to be able to work with a number of tables and SQL queries at once. And so on. Any ideas?

    Read the article

< Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >