Search Results

Search found 27946 results on 1118 pages for 'output buffer empty'.

Page 697/1118 | < Previous Page | 693 694 695 696 697 698 699 700 701 702 703 704  | Next Page >

• Ping reply not getting to LAN machines but getting in Linux router Gateway

  - by Kevin Parker

  I have configured Ubuntu 12.04 as Gateway machine.its having two interfaces eth0 with ip 192.168.122.39(Static) and eth1 connected to modem with ip address 192.168.2.3(through DHCP). ip-forwarding is enabled in router box. Client machine is configured as: ip address 192.168.122.5 and gateway 192.168.122.39 Client machines can ping router box(192.168.122.39).but when pinged 8.8.8.8 reply is not reaching Client machines but in the tcpdump output on gateway i can see echo request for 8.8.8.8 but never echo reply.Is this because of 122.5 not forwarding request to 2.0 network.Can u please help me in fixing this.

  Read the article

• Ubuntu 9.10 freezes when HDMI port is connected

  - by Felipe Hummel

  I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. The laptop has a Intel 4500 video card. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

  Read the article

• Query Performance Degrades with High Number of Logical Reads

  - by electricsk8

  I'm using Confio Ignite8 to derive this information, and monitor waits. I have one query that runs frequently, and I notice that on some days there is an extremely high number of logical reads incurred, +300,000,000 for 91,000 executions. On a good day, the logical reads are much lower, 18,000,000 for 94,000 executions. The execution plan for the query utilizes clustered index seeks, and is below. StmtText |--Nested Loops(Inner Join, OUTER REFERENCES:([f].[ParentId])) |--Clustered Index Seek(OBJECT:([StructuredFN].[dbo].[Folder].[PK_Folders] AS [f]), SEEK:([f].[FolderId]=(8125)), WHERE:([StructuredFN].[dbo].[Folder].[DealId] as [f].[DealId]=(300)) ORDERED FORWARD) |--Clustered Index Seek(OBJECT:([StructuredFN].[dbo].[Folder].[PK_Folders] AS [p]), SEEK:([p].[FolderId]=[StructuredFN].[dbo].[Folder].[ParentId] as [f].[ParentId]), WHERE:([StructuredFN].[dbo].[Folder].[DealId] as [p].[DealId]=(300)) ORDERED FORWARD) Output from showstatistics io ... Table 'Folder'. Scan count 0, logical reads 4, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Any ideas on how to troubleshoot where these high logical reads come from on certain days, and others nothing?

  Read the article

• Strange ports on default install of W7

  - by Sabre

  I have a base new install of windows 7, and when I went to look for something else I saw the attached netstat output. What concerns me is that this is Windows + Truecrypt + drivers, nothing else installed. The sequential high ranged ports belonging to several different seemingly not out of place services seemed odd. So I torched the install, used Active@ to scrub the disk, re-downloaded the ISO from MSDN, and did a fresh reinstall, viola, they are there again. It just seems out of place, I have seen a many netstats over the years, this one just strikes me as odd, so I started thinking rootkit? (JUst FYI, when I reloaded I named the machine "Error" so that is why the task manager reads the computer name as such.) So I would like to know if anyone else could explain it, and therefore is may be normal, or would they be worried as well, and should I start considering I have some very strange thing occuring on my network?

  Read the article

• Creating deterministic key pairs in javascript for use in encrypting/decrypting/signing messages

  - by SlickTheNick

  So I have been searching everywhere and havn't been able to find anything with the sufficient information I need.. so Im a bit stumped on this one at the moment What I am trying to do is create a public/private key pair (like PGP) upon a users account creation, based on their passphrase and a random seed. The public key would be saved on the server, and ideally the private key would never be seen by the server whatsoever. The user could then sign in, and send a message to another user. Before the message is sent, the senders key pair would be re-generated on the fly based on their credentials (and maybe a password prompt) and used to encrypt the message. The receiver would then use their own re-generated private key to decrypt said message. The server itself should never see any plaintext passwords, private keys or readable messages. Bit unsure how on how I could go about implementing this. Iv been looking into PGP, specifically openPGP.js. The main trouble I am having is being able to regenerate the key-pair based off a specific seed. PGP seems to have a random output even if the inputs are the same. Storing the private key in a cookie or in HTML5 storage or something also isnt really an option, too unreliable. Can anyone point me in the right direction?

  Read the article

• Keyboard not working 100% after Ubuntu 13.10 upgrade

  - by Marky

  If this has already been asked, my apologies, I did not find it before writing this. So please do point me to the correct page. Anyway, I have this weird issue on my laptop right now. The keyboard is not functioning 100%. This means, I can type my login details to get into Ubuntu. I can type something on Dash. But other than this (on the desktop), no output from the keyboard when using all the other apps - as in I start to type and nothing comes out. The surprising thing is that when I shift to Guest session, the keyboard functions normally. When I shift to another TTY, like Alt+F5, keyboard works normally. This is the first time I've encountered this so far in my use of Linux. Keyboards normally never fail on any of the desktop environments I've used over the years. Any ideas what's happening? Could be the config files on my home is too messy already. I've upgraded this from 11.10 to 13.04, then now 13.10 without a re-install. Works fine so far, until now that I can't do much without a keyboard. Thanks in advance! P.S. Mouse and touchpad works fine.

  Read the article

• Why is the resulting file unplayable when I use FFMPEG to convert a MP4 video to ASF?

  - by Fuupoo

  I want to convert an .mp4 file to an .asf file, but I need to keep the size of the file below 150 mb (the server I need to upload the file to can only take files under 150 mb). Basically I want to recontain the .mp4 in an .asf file. The code I'm using currently is ffmpeg input.mp4 -c copy output.asf The command runs, however when I try to play the file on windows media player (I'm on windows xp) I get an error message saying "Windows media player has encountered a problem while playing the file." Anyone have any idea why this is happening? And what other ways I can accomplish this task?

  Read the article

• Apache configuration file visualization/testing

  - by Matt Holgate

  Is there a tool available (or a debug mode built into Apache) that will allow me to interactively test and explain an Apache configuration for a given request? In particular, I'd like to be able to see which directives will apply when requesting a specific URL. For example, the output for the URL http://myserver.com/foo/bar/bar.html might look something like: Allow from 192.168.0.3 <-- From <Location /foo/bar> in myserver.com vhost Require valid user <-- From <Directory /var/www/foo> in global configuration Satisfy any <-- From <File bar.html> in global configuration [Background: why do I want this? The apache merging rules for configuration directives are quite complex to get right. It would be great to have a tool which allows you to check that your rules are doing exactly what you want, and would be a good learning tool]. If there isn't such a tool, is there a debug option in Apache that will log such information for each incoming request?

  Read the article

• Getting some garbage text when tar-ing a file

  - by Ramy

  when I run the following command: tar -c music.tar iTunes\ Music/ But I get the following garbage output. b????n5???z???V_o?P?O3|?b???i?Pl?jH??8??z5??????~D|_($?|b??:???š`?s7 ?%z\??Jj????K????Z??V?)?A4 2??}?4?(??#?P??ykX ?Q?e<?w?U????Y?8n??s? 1B??F.f? ?X9Lb=8??@????|?h?d???I??L?]??????-????gx??l????n?cs{f???f???6?M(?u??6??|pX?nH?V???$???????7??n?H???Yua??Xn?;{?JP?????7?@R?f_?j?*????3M?z?s9???"??0?$1??7:w???????|D_?????EjtO????????P?Y?-? xVF???Uwky?u?Yt?h ???K ?nJh?]K?J-?2??#Q????~?~B)O?MH?? "??6#?Q,uNG?~??4t?=^C I don't really care if I'm just missing some font library. But I haven't run this to completion because...well i'm not really sure what it's doing. any help appreciated.

  Read the article

• Why is my USB data transfer so slow?

  - by Dave M G

  Whenever I do any kind of file transfer using USB, whether to a USB stick, or with my Android phone, or anything else, it is ridiculously slow. It says 59.8 KB/sec, which would be an awesome speed if this were 1991 and I was using a modem to dial up to my local BBS. Surely USB technology is better than that...? 37 seconds to move less data than the equivelent of 1 MP3 file? Also, regardless of what it says about speed and time, the reality is much, much slower. I routinely see it say something like "37 seconds left" and have to wait for minutes. Sometimes, if I want to move large amounts of files, it can say it will take 8 hours or more. Is this normal? My computer may not be the most awesome on the market, and about a year old, but it's an i5 with 4GB RAM and modern components, so surely this isn't the hardware's fault. What can I do to get better USB data transfer performance? Also, I did look at this question, but my newbie eyes don't see anything that look like an actual solution, just a lot of discussion about what transfer rates could or should be. Update: As requested in the comments, I've generated a whole bunch of output from the command line, and put it on Ubuntu Pastebin. Please see it here.

  Read the article

• Looking for Unix tool/script that, given an input path, will compress every batch of uncompressed 100MB text files into a single gzip file

  - by newToFlume

  I have a dump of thousands of small text files (1-5MB) large, each containing lines of text. I need to "batch" them up, so that each batch is of a fixed size - say 100MB, and compress that batch. Now that batch could be: A single file that is just a 'cat' of the contents of the individual text files, or Just the individual text files themselves Caveats: unix split -b will not work here as I need to keep lines of text intact. Using the lines option is a bit complicated as there is a large variance in the number of bytes in each line. The files need not be a fixed size strictly, as long as it's within 5% of the requested size The lines are critical, and should not be lost: I need to confirm that the input made its way to output without loss - what rolling checksum (something like CRC32, BUT better/"stronger" in face of collisions) A script should do nicely, but this seems like a task someone has done before, and it would be nice to see some code (preferably python or ruby) that does atleast something similar.

  Read the article

• ATI driver in Fedora linux 11

  - by unknown (google)

  I recently built a pc with an ATI Radeon HD 5750. I have installed Fedora 11 and installed the device driver for the Radeon 5700 series proprietary drivers. I wanted to see if there is graphics hardware acceleration. I typed in glxinfo at the terminal and I got: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 135 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 14 Current serial number in output stream: 14 I don't know how to fix this. I tried to go to the ATI Catalyst Control Center; that worked, but the ATI Catalyst Control Center (Administrator) doesn't work. If anyone knows how to fix this problem then please let me know. Thanks

  Read the article

• crontab still sending emails even with > /dev/null

  - by user2344668

  I have a crontab (root) that runs a script and output is set to /dev/null but I always get the emails whenever it runs. I only want to receive error emails. # Rackspace driveclient update (12pm MST) 0 12 * * * /root/scripts/driveclient-update > /dev/null The only way I can get it to turn off is to use /dev/null 2&1 but then I won't get error emails. This is happening on three different CentOS servers, two are 6.3 and one is 6.4. NOTE: I have read over and over that /dev/null is supposed to send stdout there and prevent the email if there is nothing but stdout from the script, so at works for at least some people; I cannot figure out why it is not working on these servers. Here's an example of where /dev/null is supposed to work: http://www.alphadevx.com/a/384-Suppressing-Cron-Job-Email-Notifications

  Read the article

• Shell script to read value from a file and compare it to another one

  - by maneeshshetty

  I have a C program which puts one unique value inside a test file (it would be a two digit number). Now I want to run a shell script to read that number and then compare with my required number (e.g. 40). The comparison should deliver "equal to" or "greater". For example: The output of the C program is written into the file called c.txt with the value 36, and I want to compare it with the number 40. So I want that comparison to be "equal to" or "greater" and then echo the value "equal" or "greater".

  Read the article

• Finding throuput of CPU and Hardrive on Solaris

  - by Jim

  How do I find the throughput of a CPU and the hard disk on an OpenSolaris machine? Using mpstat or iostat? I'm having a hard time identifying the throughput if it is given at all in the commands output. For example, in mpstat there is very little explanation as to what the columns mean. I've been using the syscl column divided by time interval to find the throughput but to be honest I have no idea what a system call truly is. I'm trying to to analyze a hardrive and CPU while writing a file to the hardisk and when at rest.

  Read the article

• Problem with php and apache

  - by user47587

  I am having trouble using the php module with apache2. At the moment, testing with a phpinfo script, only php code is displayed as though it were text, no output at all. I have the line LoadModule php5_module libphp5.so, with an absolute path. Yet, when I do apache2 -t -D DUMP_MODULES |grep php, nothing is reported I have my error level set to warn, and the last entry in my logfile after apache starts is [notice] Apache/2.2.15 (Unix) PHP/5.2.12 mod_ssl/2.2.15 OpenSSL/0.9.8g configured -- resuming normal operations Which implies there is php support?

  Read the article

• How to print new line character with echo?

  - by Summer_More_More_Tea

  I dump a string with hexdump like this 2031 3334 2e30 0a32 2032 3331 302e 000a. It is clear that 0x0a is new line character, however, when I try to echo this string out, I always got 1 430.2 2 13.0 -- the new line is replaced with a space, even I use the -e flag. What may be the problem? Does the tailing \0 ruin the output? Is there any alternatives to print 0x0a a new line? Thanks and Best regards.

  Read the article

• Firewall still blocking port 53 despite listing otherwise?

  - by Tom

  I have 3 nodes with virtually the same iptables rules loaded from a bash script, but one particular node is blocking traffic on port 53 despite listing it's accepting it: $ iptables --list -v Chain INPUT (policy DROP 8886 packets, 657K bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo any anywhere anywhere 2 122 ACCEPT icmp -- any any anywhere anywhere icmp echo-request 20738 5600K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- eth1 any anywhere node1.com multiport dports http,smtp 0 0 ACCEPT udp -- eth1 any anywhere ns.node1.com udp dpt:domain 0 0 ACCEPT tcp -- eth1 any anywhere ns.node1.com tcp dpt:domain 0 0 ACCEPT all -- eth0 any node2.backend anywhere 21 1260 ACCEPT all -- eth0 any node3.backend anywhere 0 0 ACCEPT all -- eth0 any node4.backend anywhere Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 15804 packets, 26M bytes) pkts bytes target prot opt in out source destination nmap -sV -p 53 ns.node1.com // From remote server Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2011-02-24 11:44 EST Interesting ports on ns.node1.com (1.2.3.4): PORT STATE SERVICE VERSION 53/tcp filtered domain Nmap finished: 1 IP address (1 host up) scanned in 0.336 seconds Any ideas? Thanks

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Table 'mysql.host' doesn't exist

  - by eriktm

  100913 10:21:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql /usr/local/mysql/libexec/mysqld: Table 'mysql.plugin' doesn't exist 100913 10:21:29 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 100913 10:21:29 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 100913 10:21:29 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended This is the output from the log-file for mysqld I get when I try to start mysqld with the mysqld_safe command. I tried to run mysql_upgrade to correct the first error, but this command seems to require the server to be started, which is my original problem. Next, it says that the table mysql.host does not exist. I was unable to figure out what this is caused by.

  Read the article

• Kubuntu never gets to the login screen

  - by searchfgold6789

  I am not sure if Xorg is using the right device... The system in question is an A4-1400 CPU with built-in Radeon Graphics. I added a PCIe Radeon HD 5750, and changed the BIOS so it would use that card automatically. Now it appears that I can see output from the TV plugged into the HDMI port, and boot into recovery mode, but cannot get to a desktop - X doesn't start. It just freezes at the Kubuntu splash screen. I have no idea how to get X to use the proper graphics card. I pasted the Xorg.log to http://paste.ubuntu.com/6261137/. And the Xorg.conf generated by aticonfig --initial is at http://paste.ubuntu.com/6261161/ Also, see lspci and lshw -c display outputs. I can provide more information, but something does tell me X is not using the right graphics card and I've no idea where to begin how to fix it... I faced a similar issue before with another distribution but found no information anywhere on how to make X use a specific graphics card. Or maybe it's not that simple.

  Read the article

• Stop ssh client from offering all the public keys it can find?

  - by Rory McCann

  Like most sysadmins I use openssh all the time. I have about a dozen ssh keys, I like to have a different ssh key for each host. However this causes a problem when I am connecting to a host for the first time, and all I have is a password. I want to just connect to the host using a password, no ssh key in this case. However the ssh client will offer all the public keys in my ~/.ssh/ (I know this from looking at the output of ssh -v). Since I have so many, I will get disconnected for too many authentication failures. Is there some way to tell my ssh client to not offer all the ssh keys?

  Read the article

• BSODs after Windows 8.1 Upgrade

  - by Techrocket9

  I just upgraded my system to Windows 8.1, and I have been getting BSODs that I did not get before the 8.1 upgrade. Though I cannot conclude that running the Android Emulator with Intel's HAXM is the cause, both crashes have occurred while the emulator was running. I get CRITICAL_STRUCTURE_CORRUPTION, the same error as this guy, except I don't have the hardware/software that he has that caused his problem. Minidumps here. Output of verifier.exe /all and then a reboot and then verifier /query: http://sdrv.ms/17CPVu9 Edit: According to software.intel.com/en-us/forums/topic/475129 (can't link due to lack of rep) it is being caused by HAXM. Will close question when I find a solution.

  Read the article

• Auto-starting a GUI application that requires sudo

  - by nanostuff

  Question: I need to auto-start a GUI application that requires sudo. I know I need to edit the sudoers file with: sudo visudo However, I don't know what to write in the file. What I already tried: sudo visudo and then added the following: nanostuff ALL = NOPASSWD: /usr/lib/AirVPN/AirVPN.exe I also tried with: nanostuff ALL = NOPASSWD /usr/bin/X11/airvpn and nanostuff ALL = NOPASSWD /usr/bin/airvpn None of those worked. By doing: ps aux | grep airvpn I get the following output: nanostuff 6805 0.2 0.4 483520 17384 ? Sl 17:13 0:01 /usr/bin/gksu -u root -m AirVPN Client needs administrative privileges. Please enter your password. mono /usr/lib/AirVPN/AirVPN.exe path=/home/nanostuff/.airvpn root 6806 0.0 0.0 78604 2392 ? Ss 17:13 0:00 /usr/bin/sudo -H -S -p GNOME_SUDO_PASS -u root -- mono /usr/lib/AirVPN/AirVPN.exe path=/home/nanostuff/.airvpn root 6808 3.2 2.0 1257532 83032 ? Sl 17:13 0:12 mono /usr/lib/AirVPN/AirVPN.exe path=/home/nanostuff/.airvpn root 6832 0.0 0.0 22652 3336 ? S 17:14 0:00 /usr/sbin/openvpn --config /home/nanostuff/.airvpn/384ef91f85df5ea2abc88c7416b95bbdf2bc4299edd2850614d4e343ba721ae3.tmp.ovpn nanostuff 6951 0.0 0.0 18932 932 pts/2 S+ 17:20 0:00 grep --color=auto airvpn Additional info: OS: Ubuntu 14.04 64bits Application: It's a VPN client

  Read the article

• Problem Activating “Windows Communication Foundation Non-HTTP Activation” feature in Windows 7

  - by Escobar5

  Hello, I'm having the following problem. I'm installing SharePoint 2010 Beta so I need to activate the windows feature "Windows Communication Foundation Non-HTTP Activation". The problem is I cannot activate it, i get the message: "An error has occurred. Not all features were successfully changed" When i look at the log (C:\Windows\Logs\CBS\CBS.log) I found this error: Process output: [l:186 [186]"SMConfigInstaller[Error]: Failed in calling 'StartService' for service 'NetTcpActivator'. Error code: 0x8007042c Anyone can give me a clue of what is happening here?

  Read the article

< Previous Page | 693 694 695 696 697 698 699 700 701 702 703 704  | Next Page >