Search Results

Search found 27819 results on 1113 pages for 'linux intel'.

Page 698/1113 | < Previous Page | 694 695 696 697 698 699 700 701 702 703 704 705  | Next Page >

• How do I get 1366x768 resolution on 12.04?

  - by Megan

  I am on an HP Envy 14, and the proper resolution that I should be using is 1366x768. This is not an option and I am stuck on 1024x768. I am using Linux 12.04. lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] I've tried to add the resolution as a mode in xorg.conf but that does not work. Please any help would be appreciated. I'm new to Linux and just got my dual boot working but this resolution issue is killing me. Edit1 I just tried using the xrandr command: xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync But I get an error: xrandr: Failed to get size of gamma for output default Edit2 lsmod returns the following: Module Size Used by vesafb 13844 1 rfcomm 47604 12 bnep 18281 2 parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 arc4 12529 2 joydev 17693 0 hid_logitech_dj 18594 0 i915 472941 5 uvcvideo 72627 0 usbhid 47199 1 hid_logitech_dj hid 99559 2 hid_logitech_dj,usbhid psmouse 87692 0 iwlwifi 332525 0 mac80211 506816 1 iwlwifi videodev 98259 1 uvcvideo snd_hda_codec_idt 70795 1 mei 41616 0 btusb 18288 2 v4l2_compat_ioctl32 17128 1 videodev hp_accel 25976 0 lis3lv02d 19876 1 hp_accel hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi input_polldev 13896 1 lis3lv02d drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 serio_raw 13211 0 snd_hda_intel 33773 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec bluetooth 180104 23 rfcomm,bnep,btusb cfg80211 205544 2 iwlwifi,mac80211 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec mac_hid 13253 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device wmi 19256 1 hp_wmi video 19596 1 i915 intel_ips 18174 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 I have installed ATI/AMD proprietary FGLRX graphics driver. But there is another one called ATI/AMD proprietary FGLRX graphics driver (post-release updates) which I have trouble installing because it gives me an error and tells me to look at some sort of jockey log.

  Read the article

• Ubuntu 14.04 says insufficient memory in my /boot memory alocation while updating

  - by Aravind Dollar

  I am new to Linux platform. I just tried installing Ubuntu alongside windows but allocated only 200 mb to the /boot partition which is not recommended. Now Ubuntu software update keep on insists me no enough space. What should I do? Is there any way to increase my /boot partition without removing the total OS? Or should I completely uninstall Ubuntu and put it back? Please anyone suggest me over this issue. I have no idea what to do. And please be elaborate, as I am new to Linux environment.

  Read the article

• How to disabled password authentication for specific users in SSHD

  - by Nick

  I have read several posts regarding restricting ALL users to Key authentication ONLY, however I want to force only a single user (svn) onto Key auth only, the rest can be key or password. I read How to disable password authentication for every users except several, however it seems the "match user" part of sshd_config is part of openssh-5.1. I am running CentOS 5.6 and only have OpenSSH 4.3. I have the following repos available at the moment. $ yum repolist Loaded plugins: fastestmirror repo id repo name status base CentOS-5 - Base enabled: 3,535 epel Extra Packages for Enterprise Linux 5 - x86_64 enabled: 6,510 extras CentOS-5 - Extras enabled: 299 ius IUS Community Packages for Enterprise Linux 5 - x86_64 enabled: 218 rpmforge RHEL 5 - RPMforge.net - dag enabled: 10,636 updates CentOS-5 - Updates enabled: 720 repolist: 21,918 I mainly use epel, rpmforge is used to the latest version (1.6) of subversion. Is there any way to achieve this with my current setup? I don't want to restrict the server to keys only because if I lose my key I lose my server ;-)

  Read the article

• Cannot access windows share

  - by Wrigley

  I have an accounting program specifically tailored to the IT industry, its called Fincon (exe based). It basically works on a client to server directory base system. the server is currently running on a windows 7 machine with a NTFS partition. I have installed Wine. Have the shared Windows directory mounted with what I assume is the correct command for such being (mount -tsmbfs //servername/sharedir /mnt/fincon -0 usename=username,password=password). I can see the shared dir although it does take a bit long to access it on the Ubuntu machine via the mapped directory but instant via normal network browsing. I have also set up the mapped directory to my D: drive in Wine and have pointed the fincon.ini to read server field from D: directly. Here's my issue, it seems that for some odd reason I cant write to the mapped directory from Ubuntu, yet I can with my Windows machines, the permissions are set correct on the Windows 7 share and I really dunno what I'm missing. I'm quite a Linux noob just switched yesterday. Thanks guys for any help in this would be quite appreciated. As I'm pulling out my hair here and really want to migrate my work PCs to a Linux OS as it just gives less issues than Windows does ever.

  Read the article

• Use crontab scheduling java application problem occurs

  - by koma

  The main method to start the java application. The main method initialize the log, and then determine whether the process is running. Every 10 minutes, scheduled to run through the linux crontab. Able to determine that the 10 minutes of this program must end. Under normal circumstances, will print the following log The beginning of the implementation of 10 minutes The end of the 10 minutes of normal The beginning of the implementation of 20 minutes The end of the 20 minutes of normal The beginning of the implementation of 30 minutes The end of the 30 minutes of normal ..... But now this situation: The beginning of the implementation of 10 minutes The end of the 10 minutes of normal Execution starts in 30 minutes, but detected already have a process in operation, the program exits. Start the execution of 40 points, but detected already have a process in operation, the program exits. ..... Very strange 20-minute log does not print, but the 20-minute program has been launched by the ps-ef | grep java view java thread, found in a 20-minute thread is locked. But why not see the log Check the linux dispatch log, not see scheduling a 20-minute log.

  Read the article

• Support our movement?

  - by Mirchi Sid

  | Imagine Freedom 2013 | mnearth Student Programs This is to inform you about the world’s first online student competition called imagine freedom which is conducted by mnearth corporation India .The imagine freedom will be one of the most popular student IT competition in the world .The program will be fully functioned with free and open source software and operating system like Ubuntu Linux and Linux . The Competition have a lot of other categories like web designing , software development and much more .The program coordinates will contact your schools for the selection process and giving the first steps for registration . If you are an expert in Open source free software? Then it is the time for you ! Otherwise do you know anyone who have the skills ? Then inform them about the program . The competitions will be done as a part of Mnearth Student Programs . The program schedule and the local competition information will be send after getting the applications . The competitions are categorized into three . |Categories Of Participants Animation Films Multimedia Presentation 3D Animation Web Designing Software Development Innovations Cloud Apps Games etc. . . . . . |Levels Of Participants High School Level Higher Secondary Level Collage Level University Level |High School level This levels is for the students who is students . It’s age limit is 12 - 24 years . The competitions will be started on this year for selecting the good students who have the talent . For more information Send to : [email protected] Call us on :04936312206 (india) Join with the Community on facebook : follow us on twitter : www.twitter.com/imaginatingkids www.facebook.com/imaginefreedomonce

  Read the article

• Banshee gapless playback does not work when playing mp3s

  - by ComputerGuy505

  Even though I have gapless playback enabled in Banshee's settings menu, there is a very short pause between songs. This might be due to the fact that my hard drive's partitions seem wierd. fdisk -l produces this output: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4a73c3cb Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 724153740 361872070+ 7 HPFS/NTFS/exFAT /dev/sda3 1456826368 1465145343 4159488 c W95 FAT32 (LBA) /dev/sda4 724154366 1456826367 366336001 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 1440159744 1456826367 8333312 82 Linux swap / Solaris /dev/sda6 724154368 1440159743 358002688 83 Linux Partition table entries are not in disk order Playing mp3's from /dev/sda2 or /dev/sda6 produces this problem. I don't seem to have gapless playback on Rhythmbox or Clementine either, if those media players are supposed to have it. I'm not sure what other info to provide. This is just annoying to me. Thanks for any help.

  Read the article

• How to invoke a command using specific proxy server?

  - by Xiè Jìléi

  Some applications support proxy (http proxy or socks proxy), and some are not. For browsers, I can specify proxy server in the preferences/options dialog, and other applications may be able to configure proxy servers in config files. For general purpose, can I invoke a command using a specific proxy? Like following: $ proxy-exec --type sock5 --server 1.2.3.4:8000 -- wget/ftp ... I'm using Ubuntu Maverick. P.S. In win32, it can be implemented by hijacking the socket dlls, maybe, I'm not familiar with Linux programming, but I guess it's possible in Linux. though.

  Read the article

• How do I understand the partition table? (I want to start over.)

  - by Sammy Black

  I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

  Read the article

• Modifying Windows Shortcut .lnk file

  - by user13267

  here as it's locked over there; I hope it belongs in this forum; Is it possible to open .lnk (windows shortcut) in a hex editor, and change the absolut shortcut path into a relative one? Can we do this is windows? The edit command in cmd can open link files but it's difficult to read and edit. Is there any hex editor in windows that can open lnk file and allow me to edit it? Do I need to take it to linux or does Linux recognize .lnk as a shortcut too? I want to do this not only for running exe files, but also for pointing to folders (that is, shortcut to folders). A batch file which executes explorer.exe with the target folder as parameter can do this actually, but I want to know if there is any way to actually edit the data in the .lnk file itself

  Read the article

• What is a safe way to dispose of personal info on an old laptop and what to do with said laptop?

  - by MikeN

  I have an old laptop someone gave me that only has 64Megs of RAM on it and runs WIN XP. I wanted to wipe the drive clean by installing Ubuntu Desktop to remove any shred of personal information on it and to make it useful to someone else. But the Ubuntu installer keeps failing because there is not enough RAM. Is there another version of Linux that would easily install on a 64 Megs of RAM system? 2nd part of question, what do I do with this old laptop? It doesn't have a battery anymore and has to be plugged into the wall to run. Assuming I can install a good Linux distro on it, who do I give it to? Salvation Army? I'm looking to just have it be useful to someone or some organization for spare parts or some basic computer usage.

  Read the article

• Switch to another CPanel server, restore mailbox, how to stop Outlook POP3 pull mail data again.

  - by Shiro

  Hi, We switch from a linux CPanel server to another CPanel server, all the setting and file is restore back to the new Linux CPanel server. E.g [email protected] , inside the server I got 100mails. It had been downloaded to my Outlook, my outlook also got 100 mails inside. After I switch to new server, the 100 mail in the old server had been transfer to new server. However, when I open my Outlook, it start to download the 100 mails again, that means I got 200 mails in my mailbox and it is duplicated. How can I stop Outlook to download. The time stamp, receiver and sender is exactly the same. We want to keep a backup in the server, because we don't have a physical server to keep the mail. That why we would like to transfer the mailbox to the new server. Anyone have solution to stop Outlook download again?

  Read the article

• Why do most routers not include local DNS?

  - by user785194

  I need to change my firewall/router, and I'd prefer something with built-in DNS to resolve queries on the local subnets. I've got a mixed Linux/Windows system, often with only one computer turned on, and I frequently have problems resolving local names. I don't want to keep a Linux box permanently on just for DNS, and I'd prefer to have DNS in my router appliance, which is always on. I search Google for this occasionally but never find anything. You always get the obvious answers - it's not possible, put everything in /etc/hosts, NetBIOS, dedicated box, etc. So what am I missing? Why don't "cheap" routers let you do this? I'm pretty sure that Cisco kit does this. Almost all cheap routers will let you do MAC address reservation, to let them assign static IP addresses for DHCP. So why can't they simply do DNS as well for everything on the local subnets, just passing through remote domains to the ISP?

  Read the article

• Truecrypt system partion partially encryted but then drive corrupted and won't boot - decrypting so I can access files to backup?

  - by Dr.Seuss

  So I was attempting to encrypt my (Windows 7) system drive with Truecrypt and it stopped at around 15% and said that there was a segment error and that it could not proceed until it was fixed. So, I restarted the computer and ran HDD Regenerator which subsequently fixed the bad sectors on the drive, but now my system cannot boot. So, I run a number of recovery disks to no avail (Windows repair is unable to fix) and the drive won't mount on a linux version run from a CD because the drive is encrypted. So I tried mounting the drive using Truecrypt under the Linux distribution on the disk and selected "Mount partition using system encryption without pre-boot authentication" so I can decrypt, but I get an error message about it only being possible once the entire system is encrypted. How do I get out of this mess? I need to be able to back up the data that's on that partially encrypted drive so I can reinstall my operating system.

  Read the article

• Ubuntu black screen after Installation of 12.10 Live USB

  - by Lime0fHint

  My computer was made in 2004, but I'm sure it doesn't matter since it's a durable machine. So recently, I decided to breathe new life to it with Linux. I tried Lubuntu 12.10, Nope. Black screen after install. So I tried Ubuntu 12.10 when I gave up, and same exact thing. Except, this time I'm fighting for it, since Ubuntu is the best OS I've ever seen. So back on-topic, when I start the installation, it says that something is already mounted (Sda or something of the sorts) So I just figure that it's the Live USB I'm using. So I let it ignore it, and move on. The rest of the installation goes smooth, all looks fine. Then I get to the screen with the introductory to Ubuntu. Meanwhile, it's still installing, but finishing up. I'm not sure if the install actually finishes, but I do know that after a bit, the screen goes back to the desktop. The install closes and I'm back at the desktop, and the cursor is showing the "loading" symbol, as if it were still working. Then the screen goes black, with the same cursor. After that, nothing. I left it over night like that thinking it was doing something, in the morning it was still black with the cursor circling or whatever. So what could be causing this? One concern I have is that I have a Nvidia graphics card (7300 GT). I heard that Nvidia isn't compatible with Linux? I did notice that it was marked as unreconigsed by Ubuntu, so is that the problem perhaps?

  Read the article

• xubuntu 12.04 screen regularly stops refreshing, refreshing resumes after un-/re-maximizing a window

  - by user68477

  My screen frequently stops completely refreshing. I can make it resume refreshing by un-maximizing/re-maximize a window or by switching workspace (the un-/re-maximizing works every time. Switching workspace sometimes has to be done a couple of times). The immediate impression is that the system is frozen: there is apparently no reaction to anything I do but interestingly window title bar will change, if I switch application with (i.e alt+tab or browse through folders) I saw an identical issue in ubuntu 10.04, though a lot less frequent, I never saw this in ubuntu 12.04 (which I have been using the last 4-5 months). After switching to Xubuntu I'm seeing this again and more frequently. The specific reason I'm not sure this is a bug: I installed gnome-control-center which dragged in tons of packages. This was while trying to fix dual-screen setup. I believe the issue surfaced after this. I later meticulously removed every package from this batch (purge) in the hope that every setting would also be removed. But the issue has persisted. Another issue happened at the same time, it may be totally unrelated but it feels as if it is the same basic issue: the screen resolution of the greeter became less than the expected 1680x1050 and often after login there's just a blank and totally unresponsive wallpaper without panel so I have to force reboot. When the login is successful it's very clear that it works hard to determine the correct resolution which is achieved after a few blink to black screens. My questions: 1) Is this a settings issue or a bug? 2) How do I begin to research the issue - could I perhaps some way reset xubuntu/xfce to default. 3) If this is a bug where would be the most appropriate place report this? System: Thinkpad T500 ati radeon HD 3650 $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 3650 OpenGL version string: 3.3.11627 Compatibility Profile Context $ uname -a Linux srvname 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux xfce 4.10 Compiz 0.9.7.8

  Read the article

• Which version management design methodology to be used in a Dependent System nodes?

  - by actiononmail

  This is my first question so please indicate if my question is too vague and not understandable. My question is more related to High Level Design. We have a system (specifically an ATCA Chassis) configured in a Star Topology, having Master Node (MN) and other sub-ordinate nodes(SN). All nodes are connected via Ethernet and shall run on Linux OS with other proprietary applications. I have to build a recovery Framework Design so that any software entity, whether its Linux, Ramdisk or application can be rollback to previous good versions if something bad happens. Thus I think of maintaining a State Version Matrix over MN, where each State(1,2....n) represents Good Kernel, Ramdisk and application versions for each SN. It may happen that one SN version can dependent on other SN's version. Please see following diagram:- So I am in dilemma whether to use Package Management Methodology used by Debian Distributions (Like Ubuntu) or GIT repository methodology; in order to do a Rollback to previous good versions on either one SN or on all the dependent SNs. The method should also be easier for upgrading SNs along with MNs. Some of the features which I am trying to achieve:- 1) Upgrade of even single software entity is achievable without hindering others. 2) Dependency checks must be done before applying rollback or upgrade on each of the SN 3) User Prompt should be given in case dependency fails.If User still go for rollback, all the SNs should get notification to rollback there own releases (if required). 4) The binaries should be distributed on SNs accordingly so that recovery process is faster; rather fetching every time from MN. 5) Release Patches from developer for bug fixes, feature enhancement can be applied on running system. 6) Each version can be easily tracked and distinguishable. Thanks

  Read the article

• modprobe not found at all

  - by timmeyh

  I know that a lot of people had problems finding modprobe which was mostely due to an unconfigured $PATH. This time however I logged into a machine (Linux mymachine 2.6.32-6-pve #1 SMP Mon Jan 23 08:27:52 CET 2012 i686 GNU/Linux with root rights) and modprobe wasn't found at all. This are the steps I have taken so far: - which modprobe => no results - locate modprobe => no results - my $PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11: - find / -name "modprobe*" => /proc/sys/kernel/modprobe - cat /proc/sys/kernel/modprobe => /sbin/modprobe - /sbin/modprobe => no such file or directory Ass you can see no modprobe at all. Does anyone else has a suggestion/ sollution so I can use modprobe?

  Read the article

• Recover files after unsuccessful partitioning

  - by arsan

  I wanted to install another Linux on my computer, so I tried to resize one of my NTFS partitions with Norton Partition Magic. It didn't complete successfully, showed some errors, said that the partition is not resized and that it's the same size like before. But when I rebooted my computer I couldn't open that partition anymore and I am also not able to mount it from Linux. So this is my question: I had very important data on that partition - can I recover it? I guess nothing's deleted; it's just something messed up so it's not usable, but can I get it back? Please reply if there's any possible way of doing this, thank you.

  Read the article

• How to run a process and completely detach it of its parent shell

  - by Bicou

  I'm running a program on a linux server that will take days to complete. I'm launching it from my workstation from an SSH terminal, as this program is command-line only. I want to be able to do all of these : launch that program, redirect standard outputs to files, exit my SSH session without making this terminate the process. I thought about $ ./MyProg.csh -params -foo -bar </dev/null 1>~/out.log 2>~/err.log & However, the process is terminated the moment I close my SSH session. My workstation is running Windows XP, and I cannot guarantee its uptime over several days, which is required for the processing of my data on the Linux server. As you may have noted, my program requires to be launched from CSH. Is it possible to do this ? Thanks.

  Read the article

• Lost the shift+< and shift+> key combinations

  - by REA_ANDREW

  On my Laptop I have somehow lost the shift+< and shift+ key combinations. Setup: Ubuntu 12.10 OS Windows 7 running in Virtual box Synergyc running on the Linux Host Connected to Synergys running on my desktop machine, also running Ubuntu 12.10 Info The key mappings are fine in Linux. This has happened following an install of vsvim inside of Visual Studio 2012. Now globally inside this particular Virtual Box instance I can no longer use shift+< and shift+ Funnily enough when I go to the VS Key mapping finder it shows me that: Shift+< mapped to Ctrl+Shift+Alt+Z Shift+ mapped to Ctrl+Shift+Alt+X I have asked in super user as this is also affecting the windows environment. Any help, greatly appreciated. TIA

  Read the article

• Running a webserver behind a firewall, is it secure?

  - by i.am.intern

  Currently we have a Linux-based firewall which NAT-ing our public IP address to give internet access to our staff's PCs and a Windows Server 2003 for internal filesharing. I want to host Redmine/SVN (a bugtracker) internally behind this firewall using a Linux server. This webserver will be accessed by our clients externally so they can post bug reports. This means that I have to open port 80 & 22 at the firewall to give access to the webserver and me to SSH it from home. However, let's say I'm using password-based SSH for the webserver and somebody cracked it. Does that mean the cracker could ping and access other servers and PCs in the network?

  Read the article

• Is it safe to expect Sun Java 6 to supported for the life of RHEL 6?

  - by Ophidian

  I'm in the planning stages of a java application that we're targeting for Red Hat Enterprise Linux 6. Unfortunately, we're stuck at RHEL 6.1 which does not ship the java-1.7.0-oracle package set (they were added in 6.3) and I don't really have any control over when we will be upgraded to the more recent version. I don't have any specific technical requirements to use Java 7, but Java 6 is going to hit public EOL in February 2013. Am I safe to assume that since Red Hat (and subsequently Oracle with its Oracle Unbreakable Linux) has shipped a copy of Java 6 in the java-1.6.0-sun package, it will support it for the entire 10 year support life of RHEL6?

  Read the article

• Weird Screen while booting to install, while installing and after the install...and then the "panic occured" error

  - by Klyn

  I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

  Read the article

• How can I disable the purple bootloader splash at boot?

  - by wim

  This question has been answered before, but neither of the methods in the accepted answer worked for me on 11.10. First I tried editing in /etc/default/grub, and then running sudo update-grub. But after that I still got a blank, plain, purple screen while the kernel is loading. The screen has no boot options, and it obscures those dmesg that I want to see going in the terminal. Next I tried removing the plymouth-theme-*, but that just broke my gnome-shell theme looks, and the purple screen still remains. I have also tried configuring it with startupmanager package, but nothing seems to get rid of that darned purple splash. here are the contents of my /etc/default/grub file: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT="0" GRUB_HIDDEN_TIMEOUT="0" GRUB_HIDDEN_TIMEOUT_QUIET="true" GRUB_TIMEOUT="0" GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`" #GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) # GRUB_TERMINAL="console" # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE="640x480" # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID="true" # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" GRUB_DISABLE_OS_PROBER="true"

  Read the article

< Previous Page | 694 695 696 697 698 699 700 701 702 703 704 705  | Next Page >