Search Results

Search found 32538 results on 1302 pages for 'database restore'.

Page 699/1302 | < Previous Page | 695 696 697 698 699 700 701 702 703 704 705 706  | Next Page >

• Windows Vista will not boot; the file header checksum does not match the computed checksum

  - by Magnus

  Right out of the blue, my wife's Sony Vaio stopped booting. This, not so fun, error message displays immediately after POST: The system cannot boot. The file is possibly corrupt. The file header checksum does not match the computed checksum The repair option on the Vista DVD says everything is fine and dandy, it couldn't be more happier or more clueless... Any ideas? Update: CHKDSK reports no issues. CHKDSK /r reports no issues. (Heck, both Windows Repair and CHKDSK could just as well tell me that I have won on lottery or that the earth is flat... ) Some have reported that a mem diagnostic could help, but for me the mem diag has just ran through 5 passes. It doesn't seem to help. According to Sony, pressing F10 should bring up the restore menu, but it doesn't, the error pops up straight after Bios POST. It seems that this error is first in line of all options at this point, and is doesn't put a smile on my face. I have attached an external USB drive and copied all user data/documents to it. I feel an OS re-install is around the corner.

  Read the article

• Free or Open Solution for Storing and Charting CSV data

  - by rrrfusco

  I'm presently storing CSV files, combining them, opening them in open office, creating pivot tables and then generating charts from the spreadsheet. I've looked at OOBase, but appending csv files to base is clunky for some reason. SQLite seems like a good database solution, but I've haven't found a good charting program that connects to it with ease. Although open office (or libreoffice) maintains the references and allows you to update the information, this process is far from efficient. There are too many steps and it seems one program should handle all of these tasks. A better program would be more intuitive, allow you to simply add inserts into a database, and include an interface for standard charting settings. EDIT Simplest Automated Analysis and Chart Generation Tool? The above answer references Spotfire and Tableau, each of which has a free 14 and 30 day trial. Each program is nicely streamlined and designed. I'm looking for a program between this quality and LibreOffice. Can you recommend a better open or free desktop solution for windows?

  Read the article

• How to bypass resume from hibernate

  - by Daniel Trebbien

  I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

  Read the article

• INFORMIX - listener thread err 25582

  - by Samuel Lao

  I´ve been digging different forums in the last 7 days looking for a possible solution.... Our database is based on informix running in a Linux server (LINUX SUSE 11). Suddenly, last saturday informix began to show an error message: listener-thread err=-25582 oserr=0, network connection is broken End users started to call reporting about slow network performance to this server, moments where the database application lost connection with server...so we proceeded doing a ping to the db server, getting good responses (1ms) without losing packets. I tried typing telnet (ipserver) 1526 which is informix's port for the application, it works. We had to disconnect the server and enable a backup db server which is located on another branch. It has been working in a regular way because the backup server hasn´t good specs (it is an old dell server model). So, I scanned the main server looking for viruses using Trend Micro Server Protect, it didn´t find anything (0 viruses and spywares). I revised the switches and routers, but I haven´t find anything strange... What else could be ? Thanks in advanced for your time and help with this issue.....I would really appreciate any advice...

  Read the article

• Kerberos authentication not working for one single domain

  - by Buddy Casino

  We have a strange problem regarding Kerberos authentication with Apache mod_auth_kerb. We use a very simple krb5.conf, where only a single (main) AD server is configured. There are many domains in the forest, and it seems that SSO is working for most of them, except one. I don't know what is special about that domain, the error message that I see in the Apache logs is "Server not found in Kerberos database": [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(1025): [client xx.xxx.xxx.xxx] Using HTTP/[email protected] as server principal for password verification [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(714): [client xx.xxx.xxx.xxx] Trying to get TGT for user [email protected] [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(625): [client xx.xxx.xxx.xxx] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(640): [client xx.xxx.xxx.xxx] krb5_get_credentials() failed when verifying KDC [Wed Aug 31 14:56:02 2011] [error] [client xx.xxx.xxx.xxx] failed to verify krb5 credentials: Server not found in Kerberos database [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(1110): [client xx.xxx.xxx.xxx] kerb_authenticate_user_krb5pwd ret=401 user=(NULL) authtype=(NULL) When I try to kinit that user on the machine on which Apache is running, it works. I also checked that DNS lookups work, including reverse lookup. Who can tell me whats going?

  Read the article

• Active Directory FRS problems. 13508 error and other problems

  - by ITPIP

  I have 3 Domain Controllers. We will call them DC1, DC2 and DC3. DC3 and DC2 show Event ID 13508 in their FRS logs with no follow-up event(13509 I think) to say the error had been fixed. DC1's FRS log no matter what you do never shows any events besides FRS service stopped and started. DC1 holds the SYSVOL that needs to be replicated to the other DC's. The other DC's sysvol folders are empty. I have tried the burflag method of fixing this but I haven't had any luck. My procedure for that was to stop all FRS services on all DC's. Then set the burflag on DC1 to D4 and the other two DCs burflag to D2. Started FRS on DC1 and the only event's I see in DC1's FRS event logs are service stopped and service started messages. This fact is leading me to believe that something is wrong on FRS for DC1. I believe there should be events 13553 and 13516 in the FRS event logs after an authoritative sysvol restore. The other two DC's do not have anything in their SYSVOL, otherwise I would have made one of them the authoritative sysvol. DC1 is MS Server 2003 Enterprise Edition SP2 DC2 is MS Server 2003 Standard Edition SP1 DC3 is MS Server 2003 R2 Standard Edition SP2 I did not setup this domain originally but I am now the administrator of it, so I don't have a lot of background on why certain things may have been done in the past. My main goal is to try and fix these issues to get myself better prepared to decommision DC1 and add a DC running Server 2008 to my domain. Thanks.

  Read the article

• keyboard intermittently stops working even after reinstalling windows 7; possibly a Chrome issue?

  - by neverskipbreakfast

  My keyboard intermittently stops working. Sometimes a couple of keys will work, but usually none. Sometimes if I mash the ctrl+alt+windows keys randomly for a bit, the keyboard will let me type one more letter before stopping again. Sometimes the keys will open a program menu but usually not. I have even completely wiped my machine and reinstalled windows 7; the problem continues. Specs: Intel iMac (early 2006, 2.0GHz, 2MB RAM, 240GB HD) running ONLY Windows 7 Professional, 32-bit (NOT through boot camp) and using a USB keyboard (Saitek Eclipse II.) Unplugging & reconnecting keyboard does NOT fix it. Connecting a different keyboard does NOT fix it. That one won't work, either. Drivers are up-to-date. Removing and reinstalling drivers does NOT fix it. Restarting the computer does NOT fix it. In fact, when the Windows logon screen appears the keyboard won't work and neither will the icon to pull up the on-screen keyboard. My mouse can click around just fine. I can only log onto a non-password protected account. Generally, logging into as different Windows user fixes it. I can then log back on to my main user account and continue work for a few hours until it happens again. Clearing my Chrome browsing data stopped the problem from recurring for a week or so. I have already REINSTALLED Windows 7 (not just a restore.) The problem returned after 2 days of use. I use Avira free antivirus software, and repeated scans turn up nothing fishy. I suspect it is related to something in Google Chrome because I used my google account to reload all my previous Chrome extensions, saved data, etc. (Chrome Extensions Installed: AdBlock, Better Google Tasks, DropBox, FB Photo Zoom, Google Mail Checker, StayFocusd.) Any ideas? Any at all?

  Read the article

• I used disk copy to clone my drive, now my windows 7 profile won't load correctly

  - by RzK

  I used easeuse disk copy, after acronis, clonezilla, windows image restore failed me. Basically it copys all sectors, I set it to skip bad sectors(40). The source drive works, it just gave me a couple errors and stopped booting at one point. The drive is an identical copy, minus 40 bad errors. The drive is set to C and active partition, I rebuilt the boot order. I've ran sfc /scannow and ran chkdsk /r chkdsk found 20kb of bad sectors if I remember right. Now the issue I get is when I log into my profile which was saved right, I get a blank light blue wallpaper (non-license) explorer.exe is not running, and there are only 4 processes running in taskmanager, including taskmanager. I would try a repair install but CRTL-E would not open, nothing will open once I force start explorer.exe, almost like all services are down. What should I do? Fresh install is almost not a possibility I will try and fix this issue. sfc /scannow /offbootdir=c:\ /offwindir=c:\windows returns "Windows Resource Protection could not perform the requested operation"

  Read the article

• Issues installing new drivers

  - by Luke

  I have a Windows XP Home SP3 system that won't detect anything on USB. It works on Ubuntu Live (off USB), and the USB keyboard and mouse work in the BIOS. Physically speaking, I'm sure it's fine. I installed the SMBus drivers and the USB driver from the motherboard's website, adn that went fine. If I plug anything in, it can detect the type of thing it is (i.e. keyboard, mouse, flash drive, etc) and even the name sometimes (i.e. Microsoft 5 button mouse), but won't accept any drivers. I have tried putting the Windows CD in the drive, but that didn't help. I have scanned for viruses and CHKDSK with no issues, and ran a MemTest86 with no issues. I am limited to one PS/2 connection for inputs, so I'm using the keyboard and haven't tried WU yet. A colleague suggested trying a new USB controller, so I put in a PCI one that only had drivers for 9x on the CD, so I assume that XP has them built in. It goes through the Found New Hardware wizard, but never actually finds drivers. I have also tried running SFC /SCANNOW and System Restore. SFC just flashes and goes away, making me believe it may be a hidden virus somewhere, but everything else seems to work, including MSE. I have reason to believe it's just an issue with detecting hardware, since even the USB Controller card can't seem to find drivers, but it can detect WHEN a USB device is connected Anyone else run into this, or have a suggestion short of re-installing Windows?

  Read the article

• Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

  - by David Osborn

  I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

  Read the article

• Biztalk 2009 logshipping with SQL 2008

  - by Manjot

  Hi, I am setting up biztalk logshipping for Biztalk 2009 database. Following http://msdn.microsoft.com/en-us/library/aa560961.aspx article, I am doing the following to setup biztalk logshipping on destination server: Enable Ad-hoc queries by: sp_configure 'show advanced options',1 go reconfigure go sp_configure 'Ad Hoc Distributed Queries',1 go reconfigure go sp_configure 'show advanced options',0 go reconfigure go Execute LogShipping_Destination_Schema & LogShipping_Destination_Logic in master on destinations server Run: exec bts_ConfigureBizTalkLogShipping @nvcDescription = '', @nvcMgmtDatabaseName = '', @nvcMgmtServerName = '', @SourceServerName = null, -- null indicates that this destination server restores all databases @fLinkServers = 1 -- 1 automatically links the server to the management database When I run this I am receiving the following error: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. After some research I found some info : Usually this error means that the SQL Server Service Principal Name (SPN) was not configured, and NTLM was not being used as an authentication mechanism. SQl services are runing under different domain accounts. So, I asked the domain admin to create SPNs for the servers, SQL service accounts for beoth source and destination using name and FQDN. enabled computer name and service accounts for delegation. When I run the following: select * from sys.dm_exec_connections I get the the same error: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON' Any help please?

  Read the article

• virtualbox snapshot size

  - by intuited

  I've started using Windows 7 under VirtualBox on an Ubuntu 10.10 host. I took about 6 snapshots over the course of setting up the VM from the Windows restore image that came with the computer. My installations were more or less limited to windows updates, antivirus, and the VB Guest Additions. I uninstalled much more than I installed. The VM was running for about 24 hours total. The snapshots increased in size at a worrisome rate, even when the machine was idle: the snapshot .vdi file for the period between 11:22 PM and 9:02 AM is 6 gigs in size; during that time very little happened. The other .vdi files are between 0.5 and 3 GB, most between 1 and 2 GB. The corresponding .sav files are between 0.5 and 1 GB. The Internet connection where I was doing this is limited to 30KB/s download, which, constantly saturated, works out to less than 3 GB per 24 hour period. Is this normal? Is there something that can be done to make snapshots more practical? update On starting up the VM again, I've noticed that mscorsvw is using significant processing time. Apparently this process [precompiles .NET assemblies]. This may have been going on during the period when I was taking snapshots, which might explain some of the snapshot size increase. I would be somewhat surprised to learn that this could be responsible for over 10 GB of additional disk usage, or that it would run for roughly 24 hours. Is this possible?

  Read the article

• Openfire on EC2 with Jingle

  - by Bjorn Roche

  I would like to run Openfire (or another XMPP server) on EC2. At the moment this is just for testing, so easy setup and configuration are important, as is low cost. At some point, however, if things go well, it will be important to scale this. Ideally, it would be nice to not have to switch software when the scaling happens, but if a switch needs to happen later it certainly can. My requirements are: basic XMPP services, including muc and pubsub. Logins controlled from an external API. Preferably, when a user attempts to connect, the XMPP server checks with the api to see if their username and password are correct, but I can also have the API keep the XMPP server up to date on new users, deleted users, pasword changes and so on. I see Openfire has a "user service" API. Not ideal, but it looks workable. Jingle, including relay and STUN. It's not at all clear to me if the Jingle Nodes plugin takes care of this. I'm a bit confused about what's required to set this up, and I'd rather know in advance than be confused along the way :). eg It seems like STUN servers require more than one IP address. Can Openfire do all this for me, including stun and media relay on a single machine? Is this hard to configure on EC2 with Openfire? What are the basic steps? Would this be easier with something else like, say Tigase? What about database? Should I use amazon's database service, or run a db on the same machine? Would the server be compatible with a service like http://www.siteuptime.com/ Thanks!

  Read the article

• Custom authentication method for GDM

  - by FMC

  I am trying to find a way of authenticating users on public computers through GDM, but I have a few things to be taken in account. The users do not have a login/password, they only thing they are given is a string. This string is unique and will allow us to identify them. You can see this string as a login without a password. The users must be present in a remote database The users must have the rights to login on the computer they are on at that time. A remote database would check if a booking on the computer had been set for that time by that user. Or if no booking had been made, allow to login. A default user id/home/gid has to be set to the user once logged in I have found ways to deal with most of those requirements, but not altogether. PAM looks nice to set up a custom way of checking if the user booked its computer. NSS MySQL looks nice to set up the environment. Would you know how to set up the environment by myself using a custom PAM module (using pam_python would be preferred)? Or any other method that could help me? Thanks in advance!

  Read the article

• PHP + MYSQL site perfomance

  - by Diego

  I have to manage a site which wasn't developed by me. It is in PHP using a mysql database, which is located in the web server. The site, sometimes (when the visitors increase too much) stops responding, or respond too slow. I have developed some sites in PHP but never took care of the management so really don't know where to start. The server (the hard) seems to be fine, when the web stops responding the cpu is being used at about 55% and has a lot of memory. I'm not asking someone to solve this issue. I only would really like if someone could give me a few tips about where can I find logs and how should I read and interpret them. So, that way I would be able to know if its the net traffic, the database (which queries), or what. Thanks! Update: Forgot to say: it is a Windows Server 2003. Note: I've recorded about a day with Jet Profiler. I don't really understand all the information it provides but there is one query which it marks as really slow. It makes sense because it is a select with a where clause which has three like condition. Initially I didn't include this in my question because when I run the query from MySQL Query Browser it doesn't take any long. It is under 0.01 seconds.

  Read the article

• What is optimal hardware configuration for heavy load LAMP application

  - by Piotr K.

  I need to run Linux-Apache-PHP-MySQL application (Moodle e-learning platform) for a large number of concurrent users - I am aiming 5000 users. By concurrent I mean that 5000 people should be able to work with the application at the same time. "Work" means not only do database reads but writes as well. The application is not very typical, since it is doing a lot of inserts/updates on the database, so caching techniques are not helping to much. We are using InnoDB storage engine. In addition application is not written with performance in mind. For instance one Apache thread usually occupies about 30-50 MB of RAM. I would be greatful for information what hardware is needed to build scalable configuration that is able to handle this kind of load. We are using right now two HP DLG 380 with two 4 core processors which are able to handle much lower load (typically 300-500 concurrent users). Is it reasonable to invest in this kind of boxes and build cluster using them or is it better to go with some more high-end hardware? I am particularly curious how many and how powerful servers are needed (number of processors/cores, size of RAM) what network equipment should be used (what kind of switches, network cards) any other hardware, like particular disc storage solutions, etc, that are needed Another thing is how to put together everything, that is what is the most optimal architecture. Clustering with MySQL is rather hard (people are complaining about MySQL Cluster, even here on Stackoverflow).

  Read the article

• Remote Desktop Session Black after Minimize

  - by TorgoGuy

  PROBLEM: When I minimize a remote desktop session and restore it, the remote desktop screen shows up black. This only happens when connecting to a particular computer. DETAILS: If I start clicking around in the black area, portions of the screen will start redrawing and showing up correctly. For example, if I leave a window open in the remote session and click where that window is located on the remote computer, then that window--and only that window--will redraw, and sometimes a portion of that window won't redraw (usually the toolbar). And to clarify--the window only has to be minimized momentarily, so it doesn't seem to be a timeout issue. Clicking or typing in the remote session still causes the remote computer to respond appropriately. Disconnecting from the session and reconnecting restores the whole screen image, as does clicking all over the place in the black image (causing each section to redraw). CONFIGURATION: This problem only happens for me when connecting to a particular computer (a W2K Server box configured to allow remote administration) and only with certain client computers. I've tried 7 different client computers with various versions of Remote Desktop (the OSes were: Win2K, Server 2003, Server 2008, Windows 7 RC, 3 XP) and two of them exhibit the problem (one is one of the XP boxes and the other is Windows 7). Those same computers can RDP to other computers without problem. RESOLUTION ATTEMPTS: I have tried the following: Disable the LOCAL screen saver as mentioned on Technet Turned off bitmap caching in the client, as mentioned on many forums. Updated to version 6.1 of the remote desktop client Using mRemote (I doubted this would work since it uses MS's code for connecting to RDP servers) Turning off all video acceleration. QUESTION: Any ideas on what is causing this?

  Read the article

• Restoring snapshot for Microsoft Exchange server

  - by Mugen

  Hi, The background: I need to do some testing with Microsoft exchange server. Specifically, I'll be installing some software on the Microsoft exchange server machine and uninstalling that same software again. The problem I face: While I repeatedly do this with different versions of my software there is a chance that sometime later the Exchange server installation might get corrupted. When that happens I would need to reinstall Exchange server which I feel is somewhat of a chore. So what I am planning to do is to install the Ms Exchange server on a virtual machine in VMware ESX server and take a snapshot so that during my work whenever the installation is corrupted I can restore the snapshot. So here's my question: Would restoring the snapshot for the Microsoft Exchange server virtual machine work correctly? I'm not familiar with the intricacies of exchange server and any changes (if any) that happen with the Domain controller when we use or install an exchange server (Personally I don't think that should happen but just making sure). I have a shortage of time and hence decided to post this question here. Could someone please tell me whether restoring a snapshot for Exchange server would work fine? Thanks a load, Mugen

  Read the article

• Moving domain and keeping IMAP email - Linux Evolution, Mac Mail

  - by Douglas Squirrel

  This question is about keeping email during a server move, where the clients are Linux (me) and Mac (my wife) using IMAP. I receive email at [email protected] using a webmail service that my hosting company (1and1) provides. I read it via IMAP in evolution, so I should have copies of all the emails on my local machine. I have just moved mydomain.com from one type of account to another, and the hosting company don't move my existing email on the server when I do this - I assume they move my account to a different mailserver, and don't choose to provide a migration path for the email to move too (yes, this is annoying). Before migrating, I backed up Evolution (File - Backup settings) and did a spot-check in the evolution-backup.tar.gz file to be sure that my mail was in there. After migrating, I restored (File - Restore settings) and had hoped that I would see all my mail again. Unfortunately, Evolution just shows me new mail sent to the account, not the old mail. Is there a way to get the old mail back in the mailserver, or at least displaying in Evolution, as it was before the move? If not, can I read it in some convenient way, e.g. in Evolution offline or in a text file (then I can pick the mails I really want to keep and resend them to myself)? Also, I am about to do a similar move for my wife's domain, [email protected]. She reads her mail on a Mac using IMAP to Apple Mail. Is there anything I can do to make the move smooth for her? (I have backed up [her user]/Library/Mail already, but not sure what to do once the move is done.)

  Read the article

• Mysql queries stuck in "sending data" state

  - by MarkPW

  I'm running a Litespeed web server and a database server (2 x Clovertown 5335) with MySQL 5.1.52-log (running on Cent OS 4.5 and 4.6 32bit respectively). Last week, I upgraded from 5.0.51a-community-log and since then I've been having a problem whereby my database server's load starts increasing for no apparent reason. Running SHOW PROCESSLIST; I see all of my SQL_CACHE queries that use a wildcard in WHERE, backing up and getting stuck in "sending data" state. However, other queries that use SQL_CACHE but no wildcard do not get caught up in this. To get things going again, the first time it happens (after about 24 hours), I have to restart mysql. 4/5 times it will re-occur after about 20 minutes or so and this time and for subsequent occurrences it is not necessary to restart mysql. Simply stopping the web server for a few minutes will suffice while I allow the stuck queries to clear themselves up. I had no such problem with the the previous mysql install. What could be causing the issue and how do I resolve it? Thanks

  Read the article

• Can I edit the snapshots of websites on most visited sites page in Chrome?

  - by arik

  I saw the previous chain of discussion, but did not find a way to continue the thread - I have found the "Preference" (I have Windows 7), but in that, I did not find clearly what to modify. I did find a section called 'URLs pinned" or something like this, but it did NOT match fully the ones I have. I have activated the 'profile sync' for Chrome - don't know if it has any effect. Can you manually edit the icons of the most visited sites, for the new tab page in Chrome? When you open a new tab in Chrome, I get the 'new page' tab, where I selected the 'most popular', so I have 8 icons with the 8 most popular sites I visited; I can also pin any one of those I see on screen, such that they remain 'permanent' there. We are missing one which would point to, say, "hotmail". So, I was looking for a way to add 'hotmail' to be one of the 8. (and, by the way, we ticked the 'X' on one of those 8, and now it remains grey / shows nothing in it). So, my double-question: How can I add a URL of my choice into one of those 8 spaces? How can I restore usage of the last one?

  Read the article

• Accidentally deleting all OSX users using dscl

  - by gutch

  OK, so I just did something really stupid and deleted all the user accounts on an OSX 10.6.6 machine by running this: sudo dscl . -delete /users What I actually wanted to do was delete a single, troublesome account using a command like this: sudo dscl . -delete /users/localadmin ...but I absent-mindedly pressed return too early and deleted the lot. I've tried using -list and can confirm that I have indeed wiped all the accounts. The machine is currently running fine, but I'm sure that once I log out / reboot then it will be completely broken. I don't mind that I've deleted the normal user accounts (there was only one I wanted anyway). But it's surely going to be a big problem that system accounts like _installer and _jabber and _lda and _windowserver etc etc are gone. So my question is, how can I restore the standard set of system accounts? Do I have to reinstall OSX from scratch? Or can I either: undelete those system accounts, or run some command to recreate the system accounts?

  Read the article

• Mirror a RAID0 volume

  - by Ghostrider

  I have two SSD running in RAID0. The capacity and speed are just great. I use Windows Home Server to do incremental daily backups. This is fine and well and I've successfully restored from these backups. However. When one of the disks physically died. I was stuck without a working system until the replacement arrives so that I can restore the array from backup. WHS restoration takes about 5 hours which basically means that I'm losing entire day for the process. Is it possible to set up kind of a recovery volume for the RAID array? Use a single mechanical HDD that would be updated with the exact clone of the RAID array on a daily basis. This way if the array goes offline for some reason, I can just boot from the mechanical HDD, lose some perf but will still be able to work. The machine in question runs Windows 7. Creating RAID01 is not an option because of the high price of the SSD and the fact that it still doesn't protect against failure of RAID controller. Is there any way it can be set up?

  Read the article

• SQL 2000 Backup/Export Process - Can't find SQL 2000 Enterprise Manager, Can't use Mgmt Studio Expre

  - by 1nsane

  I need to make a backup of a client's SQL 2000 database, however there are a few issues preventing me from doing so using the traditional methods. I've tried using SQL Management Studio Express, but the host doesn't give sufficient privileges to create a backup and I'm getting some strange error messages. I've also tried doing the "Generate Scripts" to recreate the schema, then using the DTS Wizard to migrate the data, but the IDs set up with the identity specification property are not consistent with the live database once copied over. This results in some foreign key breakage... If I remember correctly, I was able to use Microsoft SQL 2000 Enterprise Manager to perform the task before, but I can't find this anywhere... it seems Microsoft has pulled most SQL Server 2000 stuff from their site. Does anyone know where I can find a copy of Enterprise Manager (or a trial of SQL Server 2000, which I believe comes with the component)? Or conversely, does anyone know of any other tools (preferably non-commercial) that are capable of mirroring remote SQL Server 2000 DBs? Thanks!

  Read the article

• Configuring port forwarding for SSH - no response outside LAN

  - by WinnieNicklaus

  I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

  Read the article

< Previous Page | 695 696 697 698 699 700 701 702 703 704 705 706  | Next Page >