Search Results

Search found 25039 results on 1002 pages for 'machine learning'.

Page 699/1002 | < Previous Page | 695 696 697 698 699 700 701 702 703 704 705 706  | Next Page >

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • Is there a way to sort my windows within a screen session?

    - by jv1975
    I use screen and have ssh sessions open to a number of different machines from within my screen session. I'd like to keep them in order, for obvious reasons. Often I'll have to connect to a new machine which alphabetically/numerically should fit in between two existing windows. I can't find any way to reorder the windows other than with the "number" command, which swaps my current window with that at the number I specified. So adding a new window to the 15 I already have and then sticking it at position 2, while keeping all the other windows in order as well is cumbersome, to say the least, requiring swaps for all windows past #2. Is there anyway to sort the windows alphabetically? Or a way to "shift" all windows after a certain point up one spot? Or any other suggestions to insert a new window at an arbitrary point while still maintaining the order of all other windows? Thanks!

    Read the article

  • How do I properly dual boot Ubuntu and Windows 7 on an UEFI system?

    - by S. Robert James
    I have an HP Z210 with Windows 7, which is UEFI based. I'd like to dual boot it to Ubuntu 11.10 with GRUB2, but am having problems due to the UEFI. The install CD goes to the end, but then the machine always boots right into Windows. These problems are apparently documented (here and here), but there's no consensus as to what the simplest solution is. Any recommendations? I want Ubuntu and Windows to both be bootable. (Perhaps if I knew more about UEFI and its system partition, and how it differs from BIOS and MBR, I'd be in a better position. So background answers explaining how UEFI loads up are very appreciated.)

    Read the article

  • Strange stuff in apache log

    - by aL3xa
    Hi lads, I'm building some kind of webapp, and currently the whole thing runs on my machine. I was combing down my logs, and found several "strange" log entries that made me a bit paranoid. Here goes: ***.***.***.** - - [19/Dec/2010:19:47:47 +0100] "\x99\x91g\xca\xa8" 501 1054 **.***.***.** - - [19/Dec/2010:20:14:58 +0100] "<}\xdbe\x86E\x18\xe7\x8b" 501 1054 **.**.***.*** - - [21/Dec/2010:15:28:14 +0100] "J\xaa\x9f\xa3\xdd\x9c\x81\\\xbd\xb3\xbe\xf7\xa6A\x92g'\x039\x97\xac,vC\x8d\x12\xec\x80\x06\x10\x8e\xab7e\xa9\x98\x10\xa7" 501 1054 Bloody hell... what is this?!

    Read the article

  • Which free IMAP-supporting webmail would you recommend?

    - by Razor
    Considering a machine with IIS 7.5/PHP 5.2/asp.net and mysql/MSSQL available, which webmail would you pick? Don't think it's relevant but the mail server is installed on localhost, and is hmailserver. If it's one using asp.net it'd be a bonus, but PHP is ok as well and probably offers more choices. "Client side" look and feel definitely needed, flash/silverlight/ajax not a problem. I have also seen this question, but being asked almost 2years ago and being focused on php webmails, I thought that some better option could've been released in the meantime.

    Read the article

  • How can browsers in VMs resolve hostnames of websites on parent PC?

    - by elliot100
    I have a number of local websites in development on my Windows PC, set up as virtual hosts within Apache, with hostnames (along the lines of dev.example.com) resolved via the hosts file, so I can test them out them with various browsers. I now want to extend browser testing to running browsers in various OSs in virtual machines, and want to be able to resolve dev.example.com from the VMs. Currently these are a mix of VMWare Server and VirtualPC. I know I can edit the hosts file on any Windows VMs, but this is a bit fiddly and I'd like a solution which is independent of the individual VMs. I think what I need is a nameserver, but what's the simplest way of going about this? I'd like everything to be self-contained on the one machine. I think I can cover firewall and Apache permissioning issues.

    Read the article

  • Is the Internet Making us Smarter or Not?

    - by BuckWoody
    I’ve been reading recently about an exchange among some very bright folks, some who posit that the Internet with its instant-on, sometimes-right, big-statement-wins mentality is making people think in a more shallow way, teaching us to rely on others as experts and diluting our logical thought process. Others state that it broadens our perspective and extends our mental reach. Whenever I see this kind of exchange on two ends of a spectrum, I begin to wonder if both sides might be correct.   I can certainly say that I have changed my way of learning, reading, and social interactions because of the Internet. And my tolerance for reading long missives has indeed gone down. I tend to (mentally and literally) “bookmark” things I never seem to have time to get back to. But I also agree that I’ve been exposed to thoughts, ideas and people I never would have encountered any other way. So how to deal with this dichotomy?   Well, I’m going to go off and think about it. No, I’m really going to go off for a full week to a cabin I’ve rented in a National Forest in the Midwest. It has no indoor plumbing, phones, Internet connections or anything else – only a bed to sleep in and a place to cook a little. I’m taking one book, some paper, and a guitar with me and that’s it. I plan to spend my days walking, reading a little, playing a little on the guitar, but mostly just thinking. Those of you who know me might find this unusual. I’m an always-on, hyper-caffeinated, overly-busy, connected person. I haven’t taken a vacation in five years, at least for more than two or three days at a time. Even then, I keep us on the move constantly – our vacations aren’t cruises or anything like that. I check e-mail, post and all that. When I’m not on vacation, I live with and leverage lots of technology, and work with those that do the same. This, however, is a really “unplugged” event, and I’m hoping that it will let me unpack the things I’ve been stuffing in my head. I plan to spend a lot of time on a single subject, writing notes, thinking, and writing more notes.   So after I post tomorrow's “quote of the day” I’ll be “going dark” for a week. No twitter, FaceBook, LinkedIn, e-mail, chat, none of my five blogs will get updated, and I’ll have to turn in my two articles for InformIT.com early. I won’t have access to my college class portal, so my students will be without me for a week. I will really be offline. I’ll see you in a week – hopefully a little more educated. See you then.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • identifying windows service

    - by András
    On my win7 machine when I watch a movie in XBMC, once per hour the desktop regains the focus. The movie keeps playing, but in the background now, so I can only hear it. It is quite irritating. I noticed, that the Windows Application log always contains two entres for this time: "The description for Event ID 0 from source Self-service Plug-in cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer." One entry is for starting, and one for stopping 60 seconds later. This keeps repeating, every two starts 3600 seconds apart. How can I repair it? How can I find out which service it is?

    Read the article

  • cannot add a user to sysadmin role in SQL Server

    - by George2
    Hello everyone, I am using SQL Server 2008 Management Studio. The current logon account belongs to machine local administrator group. I am using Windows Integrated Security mode in SQL Server 2008. My issue is, after log into SQL Server Management Studio, I select my login name under Security/Logins, then select Server Roles Tab, then select the last item -- sysadmin to make myself belong to this group/role, but it says I do not have enough permission. Any ideas what is wrong? I think local administrator should be able to do anything. :-) thanks in advance, George

    Read the article

  • Can't write to disk

    - by nofacts
    I have seen questions similar to this, but the answers are either beyond me or the situation doesn't quite match mine. Would appreciate some direction. I recently installed Ubuntu 12.04 LTS. The OS is on a disk formatted as ext4. I added another disk to the system and formatted it as W95 FAT 32 (LBA) (0x0c). I did this because I am moving from Windows to Linux, will be needing to go back and forth with data for a while, and might need to move the disk to a Windows machine. There may have been a better format to use, but if so I didn't know any better. I was able to transfer data from an external drive to this FAT32 drive with no problem. Now, though, when I try to create a new folder or write a file to the disk I get a message that the disk is read-only. If I go to the properties, permissions for the disk, for Folder Access it says 'create and delete files'. If I try to change File Access underneath to 'read and write', either nothing happens or I get a message it can't be done. Thank you for any help.

    Read the article

  • Routing using Linux with 2 NIC cards

    - by Kevin Parker
    Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

    Read the article

  • Is the Internet Making us Smarter or Not?

    - by BuckWoody
    I’ve been reading recently about an exchange among some very bright folks, some who posit that the Internet with its instant-on, sometimes-right, big-statement-wins mentality is making people think in a more shallow way, teaching us to rely on others as experts and diluting our logical thought process. Others state that it broadens our perspective and extends our mental reach. Whenever I see this kind of exchange on two ends of a spectrum, I begin to wonder if both sides might be correct.   I can certainly say that I have changed my way of learning, reading, and social interactions because of the Internet. And my tolerance for reading long missives has indeed gone down. I tend to (mentally and literally) “bookmark” things I never seem to have time to get back to. But I also agree that I’ve been exposed to thoughts, ideas and people I never would have encountered any other way. So how to deal with this dichotomy?   Well, I’m going to go off and think about it. No, I’m really going to go off for a full week to a cabin I’ve rented in a National Forest in the Midwest. It has no indoor plumbing, phones, Internet connections or anything else – only a bed to sleep in and a place to cook a little. I’m taking one book, some paper, and a guitar with me and that’s it. I plan to spend my days walking, reading a little, playing a little on the guitar, but mostly just thinking. Those of you who know me might find this unusual. I’m an always-on, hyper-caffeinated, overly-busy, connected person. I haven’t taken a vacation in five years, at least for more than two or three days at a time. Even then, I keep us on the move constantly – our vacations aren’t cruises or anything like that. I check e-mail, post and all that. When I’m not on vacation, I live with and leverage lots of technology, and work with those that do the same. This, however, is a really “unplugged” event, and I’m hoping that it will let me unpack the things I’ve been stuffing in my head. I plan to spend a lot of time on a single subject, writing notes, thinking, and writing more notes.   So after I post tomorrow's “quote of the day” I’ll be “going dark” for a week. No twitter, FaceBook, LinkedIn, e-mail, chat, none of my five blogs will get updated, and I’ll have to turn in my two articles for InformIT.com early. I won’t have access to my college class portal, so my students will be without me for a week. I will really be offline. I’ll see you in a week – hopefully a little more educated. See you then.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Problem with alleg42.dll / program crashes / Allegro & Codeblocks

    - by user24152
    I'm having a serious problem with allegro. The program should display random pixels on the screen and when I build and run it I get the following error message: Below is the full code of my program: #include <stdio.h> #include <stdlib.h> #include <time.h> #include "allegro.h" #define Text_Color_Red makecol(255,0,0) int main() { int ret; int color_depth = 32; int x; int y; int red; int green; int blue; int color; //init allegro allegro_init(); //install keyboard install_keyboard(); //set color depth to 32 bits set_color_depth(color_depth); //init random seed srand(time(NULL)); //init video mode to 640 x 480 ret = set_gfx_mode(GFX_AUTODETECT_WINDOWED,640,480,0,0); if(ret !=0) { allegro_message(allegro_error); return 1; } //Display string textprintf(screen,font,0,0,10,0,Text_Color_Red,"Screen Resolution is: %dx%d -- Press ESC to quit !",SCREEN_W,SCREEN_H); //display pixels until ESC key is pressed //wait for keypress while(!key[KEY_ESC]) { //set a random location x = 10 + rand() % (SCREEN_W-20); y = 10 + rand() % (SCREEN_H-20); //set a random color red = rand() % 255; green = rand() % 255; blue = rand() % 255; color = makecol(red,green,blue); //draw the pixel putpixel(screen, x, y, color); } //quit allegro allegro_exit(); } END_OF_MAIN() Error message: AllegroPixels1.exe has encountered a problem and needs to close. We are sorry for the inconvenience. Error signature: AppName: allegropixels1.exe AppVer: 0.0.0.0 ModName: alleg42.dll ModVer: 4.2.3.0 Offset: 0006c05c I am using Windows XP inside a virtual machine under Parallels 7.0

    Read the article

  • Disable NSS LDAP IPv6 (AAAA) lookups

    - by pilcrow
    Question: How can I disable inet6 AAAA queries for my LDAP server during (LDAP-backed) NSS lookups on a CentOS (RHEL) 5 machine? Background: I've servers configured to consult ldap://ldap.internal for NSS passwd and group lookups. Every relevant NSS lookup, for example the getpwuid(3) implied by an ls -l which needs to translate UIDs to network user names, performs the following DNS dance before connecting to the ldap server: AAAA? ldap.internal -> (no records) AAAA? ldap.internal.internal -> NXDomain A? ldap.internal -> 192.168.3.89 I'd like to skip the first two queries completely. Configuration: [server]$ cat /etc/redhat-release CentOS release 5.4 (Final) [server]$ grep ^passwd /etc/nsswitch.conf passwd: files ldap [server]$ grep ^uri /etc/ldap.conf uri ldap://ldap.internal/ For what it's worth, IPv6 support is otherwise disabled on these systems: [server]$ grep off /etc/modprobe.conf alias ipv6 off alias net-pf-10 off [server]$ echo "$(ip a | grep -c inet6) IPv6-enabled interfaces" 0 IPv6-enabled interfaces

    Read the article

  • rsync does't work

    - by jspooner
    I set up a new ec2 ubuntu server and I'm unable to use rsync to push a file up. I can ssh to the machine with my keypair. I'm not sure why this looks like it works but finishes in half a second and there is nothing in /home/ubuntu on the server. ? ~ rsync -av -i ~/.ec2/my-keypair ~/Downloads/pushcom.2012-06-26T01-10-04.gz [email protected] building file list ... done >f..t.... gsg-keypair >f..t.... pushwoodcom.2012-06-26T01-10-04.gz sent 3624 bytes received 64 bytes 7376.00 bytes/sec total size is 3392 speedup is 0.92 I've tried 50 different ways of the rsync command but I can't get anything to work. Please help! Thanks

    Read the article

  • How to pin NetBeans to Windows 7 taskbar?

    - by Vilx-
    I've googled around and it seems that I'm not the only one with the problem, however I couldn't find the solution. Maybe someone around here has figured it out. The problem is that netbeans.exe is actually a stub which is calling javaw.exe. When I try to pin the NetBeans process to the taskbar I actually pin "Java(TM) Platform SE Binary". That changes the icon and the pin doesn't work. The funny thing is that it works on another machine. I don't know whether it's because it's a different version of NetBeans, or a different version of Java. Has anyone figured this out? Added: I know this is sort of not programming related; on the other hand there are plenty of topics around here about how to better your programming environment, and this one is no worse than those. Oh, and btw - Windows 7 Enterprise x64; Java JDK 1.6.17; Netbeans 6.8

    Read the article

  • Hard Drive Fundamentals And Verifying Disk Performance

    - by Agnel Kurian
    Over the past few months, my Windows XP machine has slowed down to a crawl. It takes about 10-15 minutes to go from power-up to reaching a responsive state. I have reasons to believe that this is a result of the hard disk slowing down. Questions: Do hard disks slow down as a result of mechanical wear and tear ...or age? How do I check if my disk has slowed down? Conversely, how can I verify that my disk is indeed running at the speed it's designed to run at? Could drivers be at fault here? Do hard disks come with drivers or does Windows use a generic driver?

    Read the article

  • Cisco Aironet 1200 Series AP Configuration

    - by nonterrorist
    I am attempting to configure a new CISCO Aironet 1200 Series Access Point to have a fixed IP. I have been searching online and I have come to the conclusion that the default IP address of this device is 10.0.0.1. These are the steps I have taken: My machine is plugged directly into the Ethernet port (not the Console port) of the AP. My Ethernet adapter is set to 10.0.0.2. I have reset the AP by holding the Mode button while powering up the device. The issue remains that I can not access 10.0.0.1 through the web, nor can I ping that address.

    Read the article

  • Ubuntu-Java Installation-Topcoder-“Java not found”

    - by hakuna121
    I realized that this might be the dumbest question here, but being a total beginner as I am, I really couldn't figure it out after trying all kinds of instructions I could found on the web. Specs: Ubuntu 13.04; What I intended to do: check out the Algorithm Competition section, by clicking the second-to-left tab,located on the top-left of the page: http://community.topcoder.com/tc What I got: a pop-up saying Java not found! Java could not be automatically detected on your machine. This page will attempt to automatically install Java and Java Web Start. If the download and installation does not occur automatically, click the link below to go to the Sun website where you can download the latest version of Java. What I did: I followed instructions on this Ubuntu Documentation page: https://help.ubuntu.com/community/Java and installed OpenJDK(Java Runtime Environment/Browser plugin/SDK) through Ubuntu Software Center. Then I rebooted the system, tried the page again. But I still got the java not found pop-up described above. Question: What's missing the get this working? Thank you!

    Read the article

  • Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

    - by mcfrosty
    I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

    Read the article

  • Technology to Prevent Multiple logins to the Same Computer

    - by Ngu Soon Hui
    OK, this is a similar question to this. Actually I am trying to prevent people from multiple login into one single computer and use my application simultaneously. This is because I want to stop them from buying one license, install it on a machine, and use certain remote desktop technologies to do multiple user login. I want to prevent them from violating the license agreement. Is there anyway that I can do in my application for this? Or is multiple login simultaneously is simply not possible?

    Read the article

  • Forms Authentication across Sub-Domains on local IIS

    - by Parminder
    I asked this question at SO http://stackoverflow.com/questions/8278015/forms-nauthentication-across-sub-domains-on-local-iis Now asking it here. I know a cookie can be shared across multiple subdomains using the setting <forms name=".ASPXAUTH" loginUrl="Login/" protection="Validation" timeout="120" path="/" domain=".mydomain.com"/> in Web.config. But how to replicate same thing on local machine. I am using windows 7 and IIS 7 on my laptop. So I have sites localhost.users/ for my actual site users.mysite.com localhost.host/ for host.mysite.com and similar.

    Read the article

  • Flash drive doesn't mount on mac

    - by Doug Harris
    I've got two different USB flash drives which are formatted MS-DOS(FAT-16). When I plug each into my MacBook Pro (running MacOS 10.6 - Snow Leopard), they don't mount. I can see them using Disk Utility. When I run an Ubuntu VM inside of VMWare Fusion, Ubuntu has no trouble mounting these either. I've tested with the drives plugged directly into the machine and plugged into a usb hub -- both give the same results. Is there a setting I've inadvertently set which disables automounting? Is there an issue with mounting FAT-16 drives?

    Read the article

  • Port Forwarding on Actiontec GT704-WG Router Issues

    - by adamweeks
    I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

    Read the article

  • Cannot Boot, How to recover

    - by Kendor
    Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

    Read the article

< Previous Page | 695 696 697 698 699 700 701 702 703 704 705 706  | Next Page >