Search Results

Search found 42628 results on 1706 pages for 'static html'.

Page 699/1706 | < Previous Page | 695 696 697 698 699 700 701 702 703 704 705 706  | Next Page >

• Ubuntu: Multiple NICs, one used only for Wake-On-LAN

  - by jcwx86

  This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

  Read the article

• Incomplete mesh using DrawIndexedPrimitives after rotating mesh

  - by user1278255

  Through help on this site I was able to draw the triangles of an unrotated, nonscaled nontransformed mesh created in Blender and exported to OBJ, accurately imported through Assimp and rendered in XNA Graphics. However after applying rotation on a single axis in Blender(Z) and adding materials(I wanted to test loading of materials through Assimp) the same mesh appears incomplete. Is something wrong with my view matrix or is it something else? This is what the unrotated mesh looks like: http://www.4shared.com/photo/qXNUSvxtba/okcube.html Here is the rotated mesh: http://www.4shared.com/photo/HAys2rWvba/badcube.html Camera, View and Projection are defined as follows: cameraPos = new Vector3(0, 5, 9); viewMatrix = Matrix.CreateLookAt(cameraPos, new Vector3(0, 0, 1), new Vector3(0, 1, 0)); projectionMatrix = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, device.Viewport.AspectRatio, 1.0f, 200.0f); Rendering is done through this code: device.Clear(ClearOptions.Target | ClearOptions.DepthBuffer, Color.DarkSlateBlue, 1.0f, 0); effect = new BasicEffect(GraphicsDevice); effect.VertexColorEnabled = true; effect.View = viewMatrix; effect.Projection = projectionMatrix; effect.World = Matrix.Identity; foreach (EffectPass pass in effect.CurrentTechnique.Passes) { pass.Apply(); device.SetVertexBuffer(vertexBuffer); device.Indices = indexBuffer; device.DrawIndexedPrimitives(Microsoft.Xna.Framework.Graphics.PrimitiveType.TriangleList, 0, 0, oScene.Meshes[0].VertexCount, 0, mMesh.FaceCount); } base.Draw(gameTime);

  Read the article

• Quick Question, robots.txt Disallow: /*/ does what exactly?

  - by Exit

  A SEO firm suggested changing the robots.txt to: User-agent: * Disallow: /*/ Allow: /ims/ I'm not sure what that would do, but my guess is that is would tell all robots to index nothing but the ims folder. I understand the wildcard, but I'm confused by the slashes and don't know how they would play out in conjunction with the wildcard. * Update * I didn't mention that there is a sitemap listed in the robots.txt file, but according to one tech blogger, he realized that sitemaps trump robots exclusions. So, even though this says in Google Webmaster Tools that everything with a trailing slash will not be indexed, the sitemap contains the important links. I did notice that the link count on Google went from 360 to 336, and the sitemap links under the URL scaled back to 3 from 6. I'm not sure the cause or what links were removed, though. Perhaps it cleaned out garbage. I'm still clueless why they would add in 'Allow: /ims/', that seems pointless. And a quick list of what would index according to the robots rules above (withouth the sitemap) using /*/: domain.com Indexed domain.com/page.html Indexed domain.com/folder/ Not Indexed domain.com/folder/page.html Not Indexed

  Read the article

• DotNetNuke + PayPal

  - by Nuri Halperin

  A DotNetNuke i'm supporting has had a paypal "buy now" button and other variations with custom fields for a while now. About 2 weeks ago (somewhere in March 2010) they all stopped working. The problem manifested such that once you clicked the "buy now" button, Paypal site would throw a scary error page to the effect of: "Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log" Once I verified no cheeky content editor changed the page, I went digging for answers. The main source incompatibility of PayPal's simple HTML forms is that DNN includes a form on every page, and nested forms are not really supported. As blogged here and lamented here, the solution I came up with is simply to modify the form enctype to 'application/x-www-form-urlencoded' as illustrated below: 1: <input type="image" border="0" 2: src="https://www.paypal.com/en_US/i/btn/btn_buynowCC_LG.gif" 3: name="submit" 4: alt="PayPal - The safer, easier way to pay online!" 5: onClick="this.form.action='https://www.paypal.com/cgi-bin/webscr'; this.form.enctype='application/x-www-form-urlencoded';this.form.submit();" /> One would think that PayPal would want the masses submitting HTML in all manners of "enctype", but I guess every company has it's quirks. At least my favorite non-profit can now continue and accept payments. Sigh.

  Read the article

• Rack Mount a PC?

  - by jasondavis

  Is it possible to build a new PC and put it in a server rack with a case like this http://www.rackmountmaster.com/4u-ipc-4032-rackmount-rack-mount-case.html

  Read the article

• Updating an interface to bootstrap

  - by Anagio

  I'm updating a web apps interface to bootstrap. There's a lot of existing CSS and Javascript/jQuery i'll have to migrate, most i'll scrap and use bootstraps. But for parts of the app that use datatables and such all that code has to be migrated. I'm working on a development server. The app has a header.phtml sidebar.phtml and a lot of content area view files. Right now i'm building static versions of view files say the header. I then open my existing header.phtml into notepad++ split screen with the static file and copy over the dynamic code. Then replace the old header.phtml with the one I just made. To make sure the header displayed correctly I had to add all the CSS and JS from bootstrap. This is conflicting with the current CSS styles and some JS conflicts as well. Should I go through the app note what JS I absolutely need what I don't and same with the CSS. Then strip all the CSS/JS from the old app that is not needed so it only has bootstraps and any other critical files and not worry about the way pages look as i'm making progress to updating them. I'd be working on mostly a wireframe of the old site without any styles until I get to applying bootstraps. Is this efficient or is there another way I can get through all these files and update them easily?

  Read the article

• developers-designers-testers interaction [closed]

  - by user29124

  Sorry for my bad English, and also you may not read this and waste your time, because it is just a lament of layman developer... Seems no one want to learn anything at my workplace. We have Mantis bug tracker, but our testers use google-docs for reports and only developers and team lead report bugs in Mantis. We have SVN for version control and use Smarty as template system, but our designers give us pure HTML (sometimes it's ugly for programmers, but mostly it's OK) in archives, and changes to design made by programmers go nowhere (I mean designers use their own obsolete HTML and CSS most of the time). We have a testing environment but designers don't have access with restricted accounts to it. So we can only ask them where to look for the problem and then investigate the problem by ourselves (and made changes to CSS by ourselves (that go nowhere most of the time...)). I will not mention legacy code without documentation, tests, or any requirements, just an absence of real interaction in triangle programmers-designers-testers. I'm not talking about using HAML, SASS, continuous integration, or something else, just about using basic tools by all participants of the development process. Maybe the absence of communication is not a problem in short-time projects, which will finish up in 2 months time but rather on the types of projects that lasts for years. Any comments please...

  Read the article

• Mod_rewrite with UTF-8 accent, multiviews , .htaccess

  - by GuruJR

  Problem: with Mod_rewrite, multiview & Apache config Introduction: The website is in french and i had problem with unicode encoding and mod_rewrite within php wihtout multiviews Old server was not handling utf8 correctly (somewhere between PHP, apache mod rewrite or mysql) Updated Server to Ubuntu 11.04 , the process was destructive lost all files in var/www/ (the site was mainly 2 files index.php & static.php) lost the site specific .Htaccess file lost MySQL dbs lost old apache.conf What i have done so far: What works: Setup GNutls for SSL, Listen 443 = port.conf Created 2 Vhosts in one file for :80 and :443 = website.conf Enforce SSL = Redirecting :80 to :443 with a mod_rewrite redirect Tried to set utf-8 everywhere.. Set charset and collation , db connection , mb_settings , names utf-8 and utf8_unicode_ci, everywhere (php,mysql,apache) to be sure to serve files as UTF-8 i enabled multiview renamed index.php.utf8.fr and static.php.utf8.fr With multiview enabled, Multibytes Accents in URL works SSL TLS 1.0 What dont work: With multiview enabled , mod_rewrite works for only one of my rewriterules With multiview Disabled, i loose access to the document root as "Forbidden" With multiview Disabled, i loose Multibytes (single charater accent) The Apache Default server is full of settings. (what can i safely remove ?) these are my configuration files so far :80 Vhost file (this one work you can use this to force redirect to https) RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} LanguagePriority fr :443 Vhost file (GnuTls is working) DocumentRoot /var/www/x ServerName example.com ServerAlias www.example.com <Directory "/var/www/x"> allow from all Options FollowSymLinks +MultiViews AddLanguage fr .fr AddCharset UTF-8 .utf8 LanguagePriority fr </Directory> GnuTLSEnable on GnuTLSPriorities SECURE:+VERS-TLS1.1:+AES-256-CBC:+RSA:+SHA1:+COMP-NULL GnuTLSCertificateFile /path/to/certificate.crt GnuTLSKeyFile /path/to/certificate.key <Directory "/var/www/x/base"> </Directory> Basic .htaccess file AddDefaultCharset utf-8 Options FollowSymLinks +MultiViews RewriteEngine on RewriteRule ^api/$ /index.php.utf8.fr?v=4 [L,NC,R] RewriteRule ^contrib/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^coop/$ /index.php.utf8.fr?v=3 [L,NC,R] RewriteRule ^crowd/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^([^/]*)/([^/]*)$ /static.php.utf8.fr?VALUEONE=$2&VALUETWO=$1 [L] So my quesiton is whats wrong , what do i have missing is there extra settings that i need to kill from the apache default . in order to be sure all parts are using utf-8 at all time, and that my mod_rewrite rules work with accent Thank you all in advance for your help, I will follow this question closely , to add any needed information.

  Read the article

• How often does Dreamhost change IP Addresses

  - by pjreddie

  So I just migrated our site to dreamhost because they are free for non-profits. However, right after I switched the nameservers over to them they changed the IP address of the site. So first they propagated out IP address x.x.x.180, then they switched it to x.x.x.178 and had to propagate that out. Point being it meant a lot of downtime since a lot of big DNS servers (like google) thought the address was still x.x.x.180 for up to 5 hours after they switched it. This is compounded by the fact that most our visitors to the site live here in Unalaska and we have local DNS servers that take a LONG time to update (like a day or more) since we get all our internet over satellite. So every time Dreamhost changes our IP address it can mean a day of downtime for us in our community. So my question is, how often do these changes take place? I asked Dreamhost support and they gave me a vague response: I wish I could say, however those changes happen at random times. They're not that frequent, maybe even months between updates, but there's no way to know for sure. First, I hardly believe that they don't know their own system well enough to give me at least some estimate or average. Second, is it worth looking at other providers so that I can get a static IP address? We were hosting the site here originally and hadn't run into this problem since we have a static IP here. We don't get a ton of traffic but usually around 500 hits a day or so, sometimes more if our stories are featured on statewide or national news broadcasts. So hours of downtime every time Dreamhost "randomly" decides to move our server location can be bad for our readership.

  Read the article

• RPi and Java Embedded GPIO: Java code to blink more LEDs

  - by hinkmond

  Now, it's time to blink the other GPIO ports with the other LEDs connected to them. This is easy using Java Embedded, since the Java programming language is powerful and flexible. Embedded developers are not used to this, since the C programming language is more popular but less easy to develop in. We just need to use a dynamic Java String array to map to the pinouts of the GPIO port names from the previous diagram posted. This way we can address each "channel" with an index into that String array. static String[] GpioChannels = { "0", "1", "4", "17", "21", "22", "10", "9" }; With this new dynamic array, we can streamline the main() of this Java program to activate all the ports. /** * @param args the command line arguments */ public static void main(String[] args) { FileWriter[] commandChannels; try { /*** Init GPIO port for output ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); for (String gpioChannel : GpioChannels) { System.out.println(gpioChannel); // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); // Open file handle to port input/output control FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for output directionFile.write(GPIO_OUT); directionFile.flush(); } And, then simply add array code to where we blink the LED to make it blink all the LEDS on and off at once. /*** Send commands to GPIO port ***/ commandChannels = new FileWriter[GpioChannels.length]; for (int channum=0; channum It's easier than falling off a log... or at least easier than C programming. Hinkmond

  Read the article

• Need Guidance Making HTML5 Canvas Game Engine

  - by Scriptonaut

  So I have some free time this winter break and want to build a simple 2d HTML5 canvas game engine. Mostly a physics engine that will dictate the way objects move and interact(collisions, etc). I made a basic game here: http://caidenhome.com/HTML%205/pong.html and would like to make more, and thought that this would be a good reason to make a simple framework for this stuff. Here are some questions: Does the scripting language have to be Javascript? What about Ruby? I will probably write it with jQuery because of the selecting powers, but I'm curious either way. Are there any great guides you guys know of? I want a fast guide that will help me bust out this engine sometime in the next 2 weeks, hopefully sooner. What are some good conventions I should be aware of? What's the best way to get sound? At the moment I'm using something like this: var audioElement = document.createElement('audio'); audioElement.setAttribute('src', 'paddle_col.wav'); audioElement.load(); I'm interested in making this engine lightweight and extremely efficient, I will do whatever it takes to get great speeds and processing power. I know this question is fairly vague, but I just need a push in the right direction. Thanks :)

  Read the article

• PHP at the root directory using Ngnix on Linode and Ubuntu 12.04

  - by Steve Kinney

  I originally set up my Linode to use it with the Sinatra applications using Phusion Passenger that I was developing and I have it working great for that. However, as time goes on, I find myself needing just a wee bit of PHP to do a server-side thing here or there. My basic set up was based off of this Linode recipe (I copied and pasted the parts that I needed—I did not install Redis and Node). If I go to http://scholarsnyc.com/index.php everything works great. If I just go the base URL however, I get a 403 Forbidden error (I have a vanilla HTML page there for now). I've played with file permissions and the same file will work if I call it directly. I've done my homework and nothing I try seems to work. I'm sure there is an obvious error. I'm also sure that there are some rookie mistakes in my Nginx configuration (some of those mistakes are the artifacts of trying different fixes from my research. user www-data www-data; worker_processes 1; events { worker_connections 1024; } upstream php { server 127.0.0.1:9001; } http { passenger_root /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.12; passenger_ruby /usr/local/bin/ruby; include mime.types; default_type application/octet-stream; index index.php index.html index.htm; sendfile on; keepalive_timeout 65; server { server_name localhost scholarsnyc.com www.scholarsnyc.com; root /srv/www/scholarsnyc.com/public; location / { index index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server { server_name data.scholarsnyc.com; root /srv/www/data.scholarsnyc.com/public; passenger_enabled on; } server { server_name tech.scholarsnyc.com; root /srv/www/tech.scholarsnyc.com/public; location / { root /srv/www/tech.scholarsnyc.com/public; index index.php index.html index.htm; } } } Any other optimizations are also appreciated. I literally don't know what to do at this point.

  Read the article

• Validating data to nest if or not within try and catch

  - by Skippy

  I am validating data, in this case I want one of three ints. I am asking this question, as it is the fundamental principle I'm interested in. This is a basic example, but I am developing best practices now, so when things become more complicated later, I am better equipped to manage them. Is it preferable to have the try and catch followed by the condition: public static int getProcType() { try { procType = getIntInput("Enter procedure type -\n" + " 1 for Exploratory,\n" + " 2 for Reconstructive, \n" + "3 for Follow up: \n"); } catch (NumberFormatException ex) { System.out.println("Error! Enter a valid option!"); getProcType(); } if (procType == 1 || procType == 2 || procType == 3) { hrlyRate = hrlyRate(procType); procedure = procedure(procType); } else { System.out.println("Error! Enter a valid option!"); getProcType(); } return procType; } Or is it better to put the if within the try and catch? public static int getProcType() { try { procType = getIntInput("Enter procedure type -\n" + " 1 for Exploratory,\n" + " 2 for Reconstructive, \n" + "3 for Follow up: \n"); if (procType == 1 || procType == 2 || procType == 3) { hrlyRate = hrlyRate(procType); procedure = procedure(procType); } else { System.out.println("Error! Enter a valid option!"); getProcType(); } } catch (NumberFormatException ex) { System.out.println("Error! Enter a valid option!"); getProcType(); } return procType; } I am thinking the if within the try, may be quicker, but also may be clumsy. Which would be better, as my programming becomes more advanced?

  Read the article

• Camera Collision inside the room model

  - by sanddy

  I am having a problem in Calculating the camera collision for my Room model which consists of sofa, tables and other models. The users shall be moving the camera front, back, rotating so i need to make sure that the camera does not collide with any of the models with in the room. I have treated all my models inside the room by BoundingBox[] and the camera by BoundingSphere. So, far i have implemented collision by looking into the tutorial from http://www.toymaker.info/Games/XNA/html/xna_model_collisions.html which was great. But, I guess the problem lies in the Transformation part. I debugged and found some points to be at Vector(-XXX,-XXX,-XXX) where X is digit. Also i found my radius of some models where too large(in thousand, i just looked into its radius value before converting to BoundingBox). Do I need to scale the model for collision??? Below are my code:- On My LoadContent(): Matrix[] transforms = new Matrix[myModel.Bones.Count]; myModel.CopyAbsoluteBoneTransformsTo(transforms); int index = 0; box = new List<BoundingBox>(); BoundingBox worldModel = Utility.CalculateBoundingBox(myModel); foreach (ModelMesh mesh in myModel.Meshes) { Vector3[] obb = new Vector3[8]; worldModel.GetCorners(obb); Vector3[] asdf = (Vector3[])obb.Clone(); Vector3.Transform(obb, ref transforms[mesh.ParentBone.Index], obb); BoundingBox worldBox = BoundingBox.CreateFromPoints(obb); box.Add(worldBox); index++; } On CameraPosition Update: BoundingSphere bs = new BoundingSphere(this.cameraPos, 5.0f); if (RoomWalkthrough.Utility.CheckCollision(bs, bb)) { // Do Something } Please Help.

  Read the article

• Xml Serialization and the [Obsolete] Attribute

  - by PSteele

  I learned something new today: Starting with .NET 3.5, the XmlSerializer no longer serializes properties that are marked with the Obsolete attribute.  I can’t say that I really agree with this.  Marking something Obsolete is supposed to be something for a developer to deal with in source code.  Once an object is serialized to XML, it becomes data.  I think using the Obsolete attribute as both a compiler flag as well as controlling XML serialization is a bad idea. In this post, I’ll show you how I ran into this and how I got around it. The Setup Let’s start with some make-believe code to demonstrate the issue.  We have a simple data class for storing some information.  We use XML serialization to read and write the data: public class MyData { public int Age { get; set; } public string FirstName { get; set; } public string LastName { get; set; } public List<String> Hobbies { get; set; }   public MyData() { this.Hobbies = new List<string>(); } } Now a few simple lines of code to serialize it to XML: static void Main(string[] args) { var data = new MyData {    FirstName = "Zachary", LastName = "Smith", Age = 50, Hobbies = {"Mischief", "Sabotage"}, }; var serializer = new XmlSerializer(typeof (MyData)); serializer.Serialize(Console.Out, data); Console.ReadKey(); } And this is what we see on the console: <?xml version="1.0" encoding="IBM437"?> <MyData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Age>50</Age> <FirstName>Zachary</FirstName> <LastName>Smith</LastName> <Hobbies> <string>Mischief</string> <string>Sabotage</string> </Hobbies> </MyData>   The Change So we decided to track the hobbies as a list of strings.  As always, things change and we have more information we need to store per-hobby.  We create a custom “Hobby” object, add a List<Hobby> to our MyData class and we obsolete the old “Hobbies” list to let developers know they shouldn’t use it going forward: public class Hobby { public string Name { get; set; } public int Frequency { get; set; } public int TimesCaught { get; set; }   public override string ToString() { return this.Name; } } public class MyData { public int Age { get; set; } public string FirstName { get; set; } public string LastName { get; set; } [Obsolete("Use HobbyData collection instead.")] public List<String> Hobbies { get; set; } public List<Hobby> HobbyData { get; set; }   public MyData() { this.Hobbies = new List<string>(); this.HobbyData = new List<Hobby>(); } } Here’s the kicker: This serialization is done in another application.  The consumers of the XML will be older clients (clients that expect only a “Hobbies” collection) as well as newer clients (that support the new “HobbyData” collection).  This really shouldn’t be a problem – the obsolete attribute is metadata for .NET compilers.  Unfortunately, the XmlSerializer also looks at the compiler attribute to determine what items to serialize/deserialize.  Here’s an example of our problem: static void Main(string[] args) { var xml = @"<?xml version=""1.0"" encoding=""IBM437""?> <MyData xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema""> <Age>50</Age> <FirstName>Zachary</FirstName> <LastName>Smith</LastName> <Hobbies> <string>Mischief</string> <string>Sabotage</string> </Hobbies> </MyData>"; var serializer = new XmlSerializer(typeof(MyData)); var stream = new StringReader(xml); var data = (MyData) serializer.Deserialize(stream);   if( data.Hobbies.Count != 2) { throw new ApplicationException("Hobbies did not deserialize properly"); } } If you run the code above, you’ll hit the exception.  Even though the XML contains a “<Hobbies>” node, the obsolete attribute prevents the node from being processed.  This will break old clients that use the new library, but don’t yet access the HobbyData collection. The Fix This fix (in this case), isn’t too painful.  The XmlSerializer exposes events for times when it runs into items (Elements, Attributes, Nodes, etc…) it doesn’t know what to do with.  We can hook in to those events and check and see if we’re getting something that we want to support (like our “Hobbies” node). Here’s a way to read in the old XML data with full support of the new data structure (and keeping the Hobbies collection marked as obsolete): static void Main(string[] args) { var xml = @"<?xml version=""1.0"" encoding=""IBM437""?> <MyData xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema""> <Age>50</Age> <FirstName>Zachary</FirstName> <LastName>Smith</LastName> <Hobbies> <string>Mischief</string> <string>Sabotage</string> </Hobbies> </MyData>"; var serializer = new XmlSerializer(typeof(MyData)); serializer.UnknownElement += serializer_UnknownElement; var stream = new StringReader(xml); var data = (MyData)serializer.Deserialize(stream);   if (data.Hobbies.Count != 2) { throw new ApplicationException("Hobbies did not deserialize properly"); } }   static void serializer_UnknownElement(object sender, XmlElementEventArgs e) { if( e.Element.Name != "Hobbies") { return; }   var target = (MyData) e.ObjectBeingDeserialized; foreach(XmlElement hobby in e.Element.ChildNodes) { target.Hobbies.Add(hobby.InnerText); target.HobbyData.Add(new Hobby{Name = hobby.InnerText}); } } As you can see, we hook in to the “UnknownElement” event.  Once we determine it’s our “Hobbies” node, we deserialize it ourselves – as well as populating the new HobbyData collection.  In this case, we have a fairly simple solution to a small change in XML layout.  If you make more extensive changes, it would probably be easier to do some custom serialization to support older data. A sample project with all of this code is available from my repository on bitbucket. Technorati Tags: XmlSerializer,Obsolete,.NET

  Read the article

• Importing Delicious export into Firefox 3

  - by Jordan Reiter

  The HTML export file from Delicious creates an HTML file that, while importable into Firefox, loses all of the tags, which pretty much misses the point of delicious. Every link I've found to do the import doesn't work: The online converter Delicious-to-Firefox 3 keeps throwing a server error; the "better" version is down I tried using the trick of syncing Delicious bookmarks to Flock and then restoring that file to my Firefox browser. Although the bookmarks are in Firefox, they don't show up anywhere. I know they're in Firefox because when I create a backup file, they're in the JSON file but they refuse to show in the browser anywhere (clicking on any tag shows an empty list) Basically, I'm looking for someone who has successfully imported their delicious bookmarks, with tags, into Firefox 3.6.13 (Mac).

  Read the article

• How do I draw a single Triangle with XNA and fill it with a Texture?

  - by Deukalion

  I'm trying to wrap my head around: http://msdn.microsoft.com/en-us/library/bb196409.aspx I'm trying to create a method in XNA that renders a single Triangle, then later make a method that takes a list of Triangles and renders them also. But it isn't working. I'm not understanding what all the things does and there's not enough information. My methods: // Triangle is a struct with A, B, C (didn't include) A, B, C = Vector3 public static void Render(GraphicsDevice device, List<Triangle> triangles, Texture2D texture) { foreach (Triangle triangle in triangles) { Render(device, triangle, texture); } } public static void Render(GraphicsDevice device, Triangle triangle, Texture2D texture) { BasicEffect _effect = new BasicEffect(device); _effect.Texture = texture; _effect.VertexColorEnabled = true; VertexPositionColor[] _vertices = new VertexPositionColor[3]; _vertices[0].Position = triangle.A; _vertices[1].Position = triangle.B; _vertices[2].Position = triangle.B; foreach (var pass in _effect.CurrentTechnique.Passes) { pass.Apply(); device.DrawUserIndexedPrimitives<VertexPositionColor> ( PrimitiveType.TriangleList, _vertices, 0, _vertices.Length, new int[] { 0, 1, 2 }, // example has something similiar, no idea what this is 0, 3 // 3 = gives me an error, 1 = works but no results ); } }

  Read the article

• Animation API vs frame animation

  - by Max

  I'm pretty far down the road in my game right now, closing in on the end. And I'm adding little tweaks here and there. I used custom frame animation of a single image with many versions of my sprite on it, and controlled which part of the image to show using rectangles. But I'm starting to think that maybe I should've used the Animation API that comes with android instead. Will this effect my performance in a negative way? Can I still use rectangles to draw my bitmap? Could I add effects from the Animation API to my current frame-controlled animation? like the fadeout-effect etc? this would mean I wont have to change my current code. I want some of my animations to fade out, and just noticed that using the Animation API makes things alot easier. But needless to say, I would prefer not having to change all my animation-code. I'm bad at explaining, so Ill show a bit of how I do my animation: private static final int BMP_ROWS = 1; //I use top-view so only need my sprite to have 1 direction private static final int BMP_COLUMNS = 3; public void update(GameControls controls) { if (sprite.isMoving) { currentFrame = ++currentFrame % BMP_COLUMNS; } else { this.setFrame(1); } } public void draw(Canvas canvas, int x, int y, float angle) { this.x=x; this.y=y; canvas.save(); canvas.rotate(angle , x + width / 2, y + height / 2); int srcX = currentFrame * width; int srcY = 0 * height; Rect src = new Rect(srcX, srcY, srcX + width, srcY + height); Rect dst = new Rect(x, y, x + width, y + height); canvas.drawBitmap(bitmap, src, dst, null); canvas.restore(); }

  Read the article

• Trying to script rsync using pam_exec

  - by Ricky-Rose

  I'm trying to write a bash script that will execute rsync when called by pam_exec. I've tried a couple different ways, and I'm not sure what I'm doing wrong. When I try to run the script at login by adding session optional pam_exec.so /usr/bin/local/sync.sh to my sshd file, it gives me an exit code of 12. if I log in and then manually run my script, it allows me to connect to the remote server, and it lists my files, but it doesn't actually sync anything. I have tried the code below using buth $USER and $PAM_USER. $PAM_USER doesn't work at all. #!/bin/sh rsync -azv -e ssh $USER@remote_server:/home/html/$USER/ /home/html/$USER

  Read the article

• Collection RemoveAll Extension Method

  - by João Angelo

  I had previously posted a RemoveAll extension method for the Dictionary<K,V> class, now it’s time to have one for the Collection<T> class. The signature is the same as in the corresponding method already available in List<T> and the implementation relies on the RemoveAt method to perform the actual removal of each element. Finally, here’s the code: public static class CollectionExtensions { /// <summary> /// Removes from the target collection all elements that match the specified predicate. /// </summary> /// <typeparam name="T">The type of elements in the target collection.</typeparam> /// <param name="collection">The target collection.</param> /// <param name="match">The predicate used to match elements.</param> /// <exception cref="ArgumentNullException"> /// The target collection is a null reference. /// <br />-or-<br /> /// The match predicate is a null reference. /// </exception> /// <returns>Returns the number of elements removed.</returns> public static int RemoveAll<T>(this Collection<T> collection, Predicate<T> match) { if (collection == null) throw new ArgumentNullException("collection"); if (match == null) throw new ArgumentNullException("match"); int count = 0; for (int i = collection.Count - 1; i >= 0; i--) { if (match(collection[i])) { collection.RemoveAt(i); count++; } } return count; } }

  Read the article

• Nginx/FPM/PHP all php files say 'File not found.'

  - by Boon

  i just installed nginx 1.1.13 and php 5.4.0 on a centos 5.8 final 64bit machine. Nginx and PHP/Fpm are running, and I can run php scripts via ssh command line, but in the browser I keep getting 'File not found.' errors on all my PHP files. This is how I have my nginx.conf handle PHP scripts: location ~ \.php$ { root /opt/nginx/html; fastcgi_pass unix:/tmp/fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /opt/nginx/html$fastcgi_script_name; include fastcgi_params; } This is a direct copy/paste from my other servers, where it works fine with this setup (but they run older versions of php/fpm). Why am I getting those errors?

  Read the article

• K-12 and Cloud considerations

  - by user736511

  Much like every other Public Sector organization, school districts in the US and Canada are under tremendous pressure to deliver consistent and modern services while operating with reduced budgets, IT personnel shortages, and staff attrition.  Electronic/remote learning and the need for immediate access to resources such as grades, calendars, curricula etc. are straining IT environments that were already burdened with meeting privacy requirements imposed by both regulators and parents/students.  One area viewed as a solution to at least some of the challenges is the use of "Cloud" in education.  Although the concept of "Cloud" is nothing new in education with many providers supplying educational material over the web, school districts defer previously-in-house-hosted services to established commercial vendors to accommodate document sharing, app hosting, and even e-mail.  Doing so, however, does not reduce an important risk, that of privacy.  As always, Cloud implementations are viewed in a skeptical manner because of the perceived reduction in sensitive data management and protection thereof, although with a careful approach and the right tooling, the benefits realized by Clouds can expand to security and privacy.   Oracle's comprehensive approach to data privacy and identity management ensures that the necessary tools are available to support regulations, operational efficiencies and strong security regardless of where the sensitive data is stored - on premise or a Cloud.  Common management tools, role-based access controls, access policy management and engineered systems provided by Oracle can be the foundational pieces on which school districts can build their Cloud implementations without having to worry about security itself. Their biggest challenge, and it is a positive one, is how to best take advantage of Oracle's DB Security and IDM functionality to reduce operational costs while enabling modern applications and data delivery to those who needs access to it. For more information please refer to http://www.oracle.com/us/products/middleware/identity-management/overview/index.html and http://www.oracle.com/us/products/database/security/overview/index.html.

  Read the article

• Apache Alias subfolder and starting with dot

  - by MauricioOtta

  I have a multi purpose server running ArchLinux that currently serves multiple virtual hosts from /var/www/domains/EXAMPLE.COM/html /var/www/domains/EXAMPLE2.COM/html I deploy those websites (mostly using Kohana framework) using a Jenkins job by checking out the project, removes the .git folder and ssh-copy the tar.gz to /var/www/domains/ on the server and untars it. Since I don't want to have to re-install phpMyAdmin after each deploy, I decided to use an alias. I would like the alias to be something like /.tools/phpMyAdmin/ so I could have more "tools" later if I wanted to. I have tried just changing the default httpd-phpmyadmin.conf that was installed by following the official WIKI: https://wiki.archlinux.org/index.php/Phpmyadmin Alias /.tools/phpMyAdmin/ "/usr/share/webapps/phpMyAdmin" <Directory "/usr/share/webapps/phpMyAdmin"> AllowOverride All Options FollowSymlinks Order allow,deny Allow from all php_admin_value open_basedir "/var/www/:/tmp/:/usr/share/webapps/:/etc/webapps:/usr/share/pear/" </Directory> Changing only that, doesn't seem to work with my current setup on the server, and apache forwards the request to the framework which 404s (as there's no route to handle /.tools/phpAdmin). I have Mass Virtual hosting enable and setup like this: # # Use name-based virtual hosting. # NameVirtualHost *:8000 # get the server name from the Host: header UseCanonicalName On # splittable logs LogFormat "%{Host}i %h %l %u %t \"%r\" %s %b" vcommon CustomLog logs/access_log vcommon <Directory /var/www/domains> # ExecCGI is needed here because we can't force # CGI execution in the way that ScriptAlias does Options FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> RewriteEngine On # a ServerName derived from a Host: header may be any case at all RewriteMap lowercase int:tolower ## deal with normal documents first: # allow Alias /icons/ to work - repeat for other aliases RewriteCond %{REQUEST_URI} !^/icons/ # allow CGIs to work RewriteCond %{REQUEST_URI} !^/cgi-bin/ # do the magic RewriteCond %{SERVER_NAME} ^(www\.|)(.*) RewriteRule ^/(.*)$ /var/www/domains/${lowercase:%2}/html/$1 ## and now deal with CGIs - we have to force a MIME type RewriteCond %{REQUEST_URI} ^/cgi-bin/ RewriteRule ^/(.*)$ /var/www/domains/${lowercase:%{SERVER_NAME}}/cgi-bin/$1 [T=application/x-httpd-cgi] There is also nginx running on this server on port 80 as a reverse proxy for Apache: location ~ \.php$ { proxy_pass http://127.0.0.1:8000; } Everything else was setup by following the official WIKI so I don't think those would cause trouble. Do I need to have the alias for phpMyAdmin setup along the mass virtual hosting or can it be in a separate include file for that alias to work?

  Read the article

• OpenGL ES 2 on Android: native window

  - by ThreaderSlash

  According to OGLES specification, we have the following definition: EGLSurface eglCreateWindowSurface(EGLDisplay display, EGLConfig config, NativeWindowType native_window, EGLint const * attrib_list) More details, here: http://www.khronos.org/opengles/documentation/opengles1_0/html/eglCreateWindowSurface.html And also by definition: int32_t ANativeWindow_setBuffersGeometry(ANativeWindow* window, int32_t width, int32_t height, int32_t format); More details, here: http://mobilepearls.com/labs/native-android-api I am running Android Native App on OGLES 2 and debugging it in a Samsung Nexus device. For setting up the 3D scene graph environment, the following variables are defined: struct android_app { ... ANativeWindow* window; }; android_app* mApplication; ... mApplication=&pApplication; And to initialize the App, we run the commands in the code: ANativeWindow_setBuffersGeometry(mApplication->window, 0, 0, lFormat); mSurface = eglCreateWindowSurface(mDisplay, lConfig, mApplication->window, NULL); Funny to say is that, the command ANativeWindow_setBuffersGeometry behaves as expected and works fine according to its definition, accepting all the parameters sent to it. But the eglCreateWindowSurface does no accept the parameter mApplication-window, as it should accept according to its definition. Instead, it looks for the following input: EGLNativeWindowType hWnd; mSurface = eglCreateWindowSurface(mDisplay,lConfig,hWnd,NULL); As an alternative, I considered to use instead: NativeWindowType hWnd=android_createDisplaySurface(); But debugger says: Function 'android_createDisplaySurface' could not be resolved Is 'android_createDisplaySurface' compatible only for OGLES 1 and not for OGLES 2? Can someone tell if there is a way to convert mApplication-window? In a way that the data from the android_app get accepted to the window surface?

  Read the article

• Can't Start ISC DHCP IPv6 Server

  - by MrDaniel

  Trying to enable the ISC DHCP server for just IPv6 on Ubuntu 12.04 LTS. I have downloaded and installed the DHCP server via the following command: $ sudo apt-get install isc-dhcp-server Then I have followed the instructions in the following resources, Ubuntu Wiki DHCPv6, SixXS - Configuring ISC DHCPv6 Server and Linux IPv6 HOWTO - Configuration of the ISC DHCP server for IPv6 . So from review all those resources it seems like I need to: set a static IPv6 address for the Interface I want to run the DHCPv6 server from that is part of the IPv6 network subnet outside the DHCP range. Edit the /etc/dhcp/dhcpd6.conf file to configure the DHCPv6 range etc. Create the /var/lib/dhcp/dhcpd6.leases Manually start the DHCPv6 server. Setting the Static IP for eth0 $ sudo ifconfig eth0 inet6 add 2001:db8:0:1::128/64 My dhcpd6.conf default-lease-time 600; max-lease-time 7200; log-facility local7; subnet6 2001:db8:0:1::/64 { #Range for clients range6 2001:db8:0:1::129 2001:db8:0:1::254; } Created the dhcpd6.leases file As indicated in the dhcpd.leases man page. $ touch /var/lib/dhcp/dhcpd6.leases #Tried with sudo as well Manually starting the DHCPv6 server. Attempted to start the server using the following command: $ sudo dhcp -6 -f -cf /etc/dhcp/dhcpd6.conf eth0 The problem, the DHCP will not start, with an append error for the dhcpd6.leases file as indicated below when running the manual start command noted above. Can't open /var/lib/dhcp/dhcpd6.leases for append. Any ideas what I might be missing?

  Read the article

< Previous Page | 695 696 697 698 699 700 701 702 703 704 705 706  | Next Page >