Search Results

Search found 717 results on 29 pages for 'brad bruce'.

Page 7/29 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Ubuntu 10.04 with HD flash

  - by Brad Robertson

  Just noticed that 10.04 is out. My media server has been packed away for a few months but I might dust if off and give 10.04 a shot but I thought I'd see if anyone has any success stories with HD flash in either Chrome or Firefox. I'm currently running Ubuntu 9.10 and it was a large enough pain to get VDPAU working with my Zotac Ion-ITX-C board (eventually found an mplayer PPA that had it compiled in) From reading the 10.04 docs it looks like this is standard now, but I'm wondering about streaming HD, from, say flash or Divx. I've never been able to get HD flash to play without it being extremely choppy, and I chalk this up to the lack of hardware assisted decoding like VDPAU (a guess). My board certainly isn't a competitor in CPU power or memory, which is why i've needed the HW accelerated decoding for HD vids in the past. Just wondering if anyone has had any success stories playing HD vid online (flash, divx or what have you)

  Read the article

• How do I stop IIS from sending minutely GET requests to my proxied mongrel server?

  - by brad

  I have a rails application running on Windows Server 2008 running IIS7.5. I am using Application Request Routing to send requests to the Mongrel server via IIS (I didn't want to set it up like this but this was the environment I have been forced to use). IIS seems to send a GET request to the Mongrel server once every minute. This is not a huge deal but it does cause a lot of pollution in my logs and also creates a large amount of unwanted session data. I would really like to stop it from doing this. Is there a way?

  Read the article

• DELL switch 6248 port and mac mapping using SNMP

  - by Brad

  I have a Dell 6248 switch. I connect some of my servers to it and want to know which server nic connected to which switch port. I try using snmpwalk to get this information, but I just can get mac/ip mapping of my server nic from switch, I still can't get which switch port it connect. I try a tool named Managed Switch Port Mapping tool, it can show which switch port is connected to which nic/ip. I use WireShare to get all snmp packets but still can't find what's the snmp oid to get this information. Anyone knows how to get this?

  Read the article

• Membership numbers

  - by Ron Bruce

  I currently use phpMyAdmin 3.2.4 to monitor and manage the membership numbers for my organization members website. Not to long ago the member numbers jumped from 750 to 1,000,000 just over night? I am not sure how to fix this. I am new at this and I am not that famaliar of how this all works. This working with MySQL database. Also where so I fined on line manuals for phpMyAdmin and MySql? Respectfully Ron

  Read the article

• How to bypass firewall to connect to a proxy server?

  - by Bruce

  I am conducting a small experiment on my office network. I have setup a proxy server on my desktop machine (connected to my LAN) and I have volunteers access the internet via my proxy server. Everything is working well. The problem is people cannot connect to the proxy server through their laptops. I asked my network admin and he said the wireless network has a firewall which prevents users from connecting to my proxy. He said I could tunnel the traffic or use SSH though. I am afraid I do not understand fully what is going on. Is there a way by which users connected on the wireless network can connect to my desktop? I am using FreeProxy on Windows as my proxy server: http://www.handcraftedsoftware.org/index.php?page=download FreeProxy allows me to create a SOCKS 4/4a/5 proxy. Is that what I need? Part of the experiment involves logging the URL requests of the users. I am doing a measurement study. So, any solution must allow me to log the URL requests of users. Also, what changes do I need to make in the browser configuration.

  Read the article

• Apache memory leak with Subversion server

  - by bruce grissom

  Does anyone know of a way to fix the Apache memory leak in relation to Subversion Server? We have a windows server 2003 machine running Apache to host Subversion. From day one, we have had memory leak issues and have not found a solution yet. All we do is monitor our server when when the memory use reaches near the max it can handle we have to restart Apache.

  Read the article

• Supervisord appears to be running, but monitored programs aren't launched

  - by Brad Montgomery

  I've got supervisord 3.0a8 installed from the system package on ubuntu 10.04 (64bit). The supervisor service appears to be running, but it's not launching the configured programs. Interestingly enough, this exact configuration is running on another system, and is working as expected. The main config file looks like this: ; /etc/supervisor/supervisord.conf [unix_http_server] chmod=0700 file=/var/run/supervisor.sock [supervisord] logfile=/var/log/supervisor/supervisord.log childlogdir=/var/log/supervisor pidfile=/var/run/supervisord.pid [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///var/run/supervisor.sock [include] files = /etc/supervisor/conf.d/*.conf A sample program config looks like this: ; /etc/supervisor/conf.d/sample.conf [program:sample] directory=/opt/sample command=/opt/sample/run.sh Where, the /opt/sample/run.sh is: #!/bin/bash while true; do T=`date` echo "[$T] Running!" >> /var/log/sample.log sleep 1 done And, here's some additional information regarding the running instance of supervisord: root@myhost:~# supervisorctl version 3.0a8 root@myhost:~# which supervisorctl /usr/bin/supervisorctl root@myhost:~# which supervisord /usr/bin/supervisord root@myhost:~# supervisorctl status # NOTE that there's no output! root@myhost:~# supervisorctl avail root@myhost:~# service supervisor status is running root@myhost:~# ps aux | grep supervisor root 21740 0.1 0.4 40772 10056 ? Ss 11:28 0:00 /usr/bin/python /usr/bin/supervisord root 21749 0.0 0.0 7624 932 pts/2 S+ 11:28 0:00 grep --color=auto supervisor root@myhost:~# cat /var/log/supervisor/supervisord.log 2012-04-26 11:28:22,483 CRIT Supervisor running as root (no user in config file) 2012-04-26 11:28:22,536 INFO RPC interface 'supervisor' initialized 2012-04-26 11:28:22,536 WARN cElementTree not installed, using slower XML parser for XML-RPC 2012-04-26 11:28:22,536 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2012-04-26 11:28:22,539 INFO daemonizing the supervisord process 2012-04-26 11:28:22,539 INFO supervisord started with pid 21740 root@myhost:~# ll /etc/supervisor/conf.d/ total 28 drwxr-xr-x 2 root root 4096 2012-04-26 11:31 ./ drwxr-xr-x 3 root root 4096 2012-04-25 18:38 ../ -rw-r--r-- 1 root root 66 2012-04-26 11:31 sample.conf root@myhost:~# ll /opt/sample/ total 12 drwxr-xr-x 2 root root 4096 2012-04-26 11:32 ./ drwxr-xr-x 4 root root 4096 2012-04-26 11:31 ../ -rwxr-xr-x 1 root root 97 2012-04-26 11:32 run.sh* root@myhost:~# python Python 2.6.5 (r265:79063, Apr 16 2010, 13:57:41) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> Any help is greatly appreciated!

  Read the article

• How do I set a postgresql password in pgpass.conf for the Administrator account on Windows Server 2008?

  - by brad

  I have a pgpass.conf file that works well for my default user. It is in C:/Users/myuser/AppData/Roaming/postgresql/pgpass.conf. It reads like so; localhost:5432:*:postgres:password1 I have a process that runs under the Administrator account. When I run whoami under this process I get nt authority/system. I want to be able to access the database from this process but it gets stuck because it needs a password. I have tried putting the above pgpass.conf into C:/Users/Administrator/AppData/postgresql/pgpass.conf and C:/Users/Administrator/AppData/Roaming/postgresql/pgpass.conf but it does not work. Is this the correct place for this file? Am I even able to do this as the Administrator. Unfortunately I cannot change the user that this process runs under.

  Read the article

• Windows 2003 IIS FTP Server Migration w/ User Accounts

  - by Brad

  I'm trying to figure out the best way to migrate an FTP server from old hardware to new hardware. The server is on a domain, but not all the users setup on the server (to use FTP) are domain accounts, some are local to the server. For example, I have users both ways: domain\username machinename\username The new machine name will be different. So I need to copy all the files with permissions in tact from the old server to the new server. Then I need to convert all the user accounts from the old server to the new server. Then I need to change the file permissions so that they are no longer oldserver\username but newserver\username. Can this be accomplished all with CALCS? Is there an easy way that perhaps I'm missing?

  Read the article

• MySQL 5.5 on Windows server is horribly slow

  - by Brad

  I have had no luck getting MySQL 5.5 to be as fast as 5.1 or MariaDB on the exact same hardware/database/environment under Windows server 2003R2 or 2008R2. My benchmarks from our application: MySQL 5.5 + CentOS 5.2 (XenServer Virtual) = 28 seconds (box is "busy" not buried) MariaDB (5.1) + Windows 2003 (Physical box) = 130 seconds (box is 2% busy) MySQL 5.1 + Windows 2003 (Physical box) = 170 seconds (box is 2% busy) MySQL 5.5 + Windows 2003 (Physical box) = 305 seconds (As high as 600 seconds...) (box is 2% busy) The only difference between these runs is the removal of skip-locking and the running of mysql_upgrade.exe to update some tables for stored procs on 5.5. Yes, I know it's a release candidate, I'm feeding that back to MySQL as well. No slow queries are logged, it doesn't think it's being slow, it just is. I'm going to start tearing into the queries themselves to see if the INSERT/SELECT plans have gone buggo on 5.5. Any help would be appreciated! Thanks

  Read the article

• Memcached Lagging

  - by Brad Dwyer

  Let me preface this by saying that this is a followup question to this topic. That was "solved" by switching from Solaris (SmartOS) to Ubuntu for the memcached server. Now we've multiplied load by about 5x and are running into problems again. We are running a site that is doing about 1000 requests/minute, each request hits Memcached with approximately 3 reads and 1 write. So load is approximately 65 requests per second. Total data in the cache is about 37M, and each key contains a very small amount of data (a JSON-encoded array of integers amounting to less than 1K). We have setup a benchmarking script on these pages and fed the data into StatsD for logging. The problem is that there are spikes where Memcached takes a very long time to respond. These do not appear to correlate with spikes in traffic. What could be causing these spikes? Why would memcached take over a second to reply? We just booted up a second server to put in the pool and it didn't make any noticeable difference in the frequency or severity of the spikes. This is the output of getStats() on the servers: Array ( [-----------] => Array ( [pid] => 1364 [uptime] => 3715684 [threads] => 4 [time] => 1336596719 [pointer_size] => 64 [rusage_user_seconds] => 7924 [rusage_user_microseconds] => 170000 [rusage_system_seconds] => 187214 [rusage_system_microseconds] => 190000 [curr_items] => 12578 [total_items] => 53516300 [limit_maxbytes] => 943718400 [curr_connections] => 14 [total_connections] => 72550117 [connection_structures] => 165 [bytes] => 2616068 [cmd_get] => 450388258 [cmd_set] => 53493365 [get_hits] => 450388258 [get_misses] => 2244297 [evictions] => 0 [bytes_read] => 2138744916 [bytes_written] => 745275216 [version] => 1.4.2 ) [-----------:11211] => Array ( [pid] => 8099 [uptime] => 4687 [threads] => 4 [time] => 1336596719 [pointer_size] => 64 [rusage_user_seconds] => 7 [rusage_user_microseconds] => 170000 [rusage_system_seconds] => 290 [rusage_system_microseconds] => 990000 [curr_items] => 2384 [total_items] => 225964 [limit_maxbytes] => 943718400 [curr_connections] => 7 [total_connections] => 588097 [connection_structures] => 91 [bytes] => 562641 [cmd_get] => 1012562 [cmd_set] => 225778 [get_hits] => 1012562 [get_misses] => 125161 [evictions] => 0 [bytes_read] => 91270698 [bytes_written] => 350071516 [version] => 1.4.2 ) ) Edit: Here is the result of a set and retrieve of 10,000 values. Normal: Stored 10000 values in 5.6118 seconds. Average: 0.0006 High: 0.1958 Low: 0.0003 Fetched 10000 values in 5.1215 seconds. Average: 0.0005 High: 0.0141 Low: 0.0003 When Spiking: Stored 10000 values in 16.5074 seconds. Average: 0.0017 High: 0.9288 Low: 0.0003 Fetched 10000 values in 19.8771 seconds. Average: 0.0020 High: 0.9478 Low: 0.0003

  Read the article

• What parts should I get for an ASRock x58 Extreme motherboard

  - by Brad Gilbert

  I just received an ASRock x58 Extreme motherboard, for my post on this question. It was a 2009 Tom's Hardware recommended buy. It is a Core i7 motherboard, with an X58 Express Chipset. It uses DDR3 RAM. What I want to know is, what parts should I get to finish it off. I'm looking for some good bargains, because of a lack of funds. The most taxing game I will probably play on it is OpenTTD. The only parts I currently have that are compatible: A Dynex 400W power supply. It appears to be an ATX 2.1 power supply, with the addition of a -5 rail. Apparently designed to be compatible with most ATX-style motherboards. Several PCI add-in cards. Mostly 10/100 Network cards Some sound cards Some video cards with a VGA connector Plenty of PATA drives. 8 GB - 80 GB Hard-drives A dozen or-so CD-ROM drives, only a handful of them are CD-RW drives. One DVD-ROM drive I have one LCD, with a 15 pin VGA connector, which I salvaged from the dump. The only thing wrong with it was some dead capacitors. It also has a stuck pixel.

  Read the article

• mod_proxy security

  - by brad

  I'm on Debian Lenny using apache2. in my proxy.conf I tried adding Allow from localhost as suggested in some other forums to get proxying to work. Didn't work. It only worked if I say Allow from all My question is this. Are there any security implications to this Allow from all directive? Most people were saying to make this as limited as possible, but "all" is the client right? I want anyone regardless of their IP to be forwarded properly. Is there a better way to configure this?

  Read the article

• How do I get started with Chef?

  - by Brad Wright

  The chef documentation is pretty bad. And Google isn't helping me. Can anyone point me at a decent article or something that would help me get started? My specific issues are: How do I get a client to read my configuration? chef-solo seems like the best start (I don't want to run an OpenID server or Merb) How do I configure Apache to serve Django? I already know how to do this via regular server configuration, but I figure an example Chef recipe would be a good start;

  Read the article

• How to prevent nginx from locking files on mounted samba partition in Centos 6

  - by Bruce Kirkpatrick

  I'm using nginx 1.3.8 inside a centos 6.3 virtualbox 4.2.4 virtual machine. The system is running the latest software available via yum update. The host OS is windows 7. The site files nginx is serving are on mounted samba partition, which is a folder on the host Windows system. I.e., inside linux, nginx paths are referring to /home/vhosts and this is mounted from D:\vhosts\ on windows. The samba partition is mounted as root with 777 privileges. /etc/fstab looks like this, but with real ip, username, password: //hostip/vhosts /home/vhosts cifs username=username,password=SECRETPASSWORD,uid=root,gid=root,file_mode=0777,dir_mode=0777,rw,_netdev 0 0 I.e. linux/nginx reads from the windows share, and not the opposite. in /etc/samba/smb.conf, I have tried to disable all samba locking features, but it seems to have no effect even after rebooting the virtual machine. locking=no share modes=no oplocks = no level2 oplocks = no kernel oplocks =no I'm receiving "Access is denied" errors in Windows or linux when attempting to overwrite the javascript file in windows that has been accessed at least once with nginx. If I run "service nginx reload", the lock is removed and I'm able to save the file. That's why I think it is nginx causing the lock. The same problem occurs with directories. However, that may be a different issue not related to the use of samba. I'm using samba so that I can manage the source code outside of the virtual machine. Also note that after I run "service nginx reload", the file I'm editing is actually automatically deleted from the windows host. SOLVED: I just reviewed my nginx.conf file. It appears the "open_file_cache" feature is what is causing the lock and deleted files. When I set this option to open_file_cache off;, My problem is resolved. I will repost as the answer when it allows me to do so.

  Read the article

• How do I troubleshoot a slow hard drive?

  - by Bruce Connor

  My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

  Read the article

• Poor WAMP performance when using SMB/UNC Paths

  - by Brad

  I've configured a WAMP (Windows Apache MySQL and PHP) stack when when configured to use local storage takes 3-4 seconds to load. When I use an SMB/UNC share it takes 12-15 seconds to load. Here are the two lines in my httpd.conf: #DocumentRoot "//10.99.108.11/test_htdocs" #<Directory "//10.99.108.11/test_htdocs"> #DocumentRoot "C:/www" #<Directory "C:/www"> Is there performance tuning I can do on windows server 2008 R2 to improve performance or is there another way to improve performance using smb

  Read the article

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Hi! Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• How do you use environment variables, such as %CommonProgramFiles%, in the PATH and have them recognized by services.exe?

  - by Brad Knowles

  I'm trying to add C:\Program Files\Common Files\xxx\xxx to the system PATH environment variable by appending %CommonProgramFiles%\xxx\xxx to the existing path. After rebooting, I open a command prompt and check the PATH. It expands correctly. However, when using Process Explorer from Sysinternals to view the Environment variables on services.exe, it shows the unexpanded version. Coincidentally, the paths using %SystemRoot% expand and are recognized just fine. I've tried altering the PATH through the Environment Variables window from System Properties and through direct Registry manipulation, neither seems to work. Is it possible to use other environment variables, besides %SystemRoot% in PATH and have services.exe understand it?

  Read the article

• How to force a host to not send a broadcast for an IP address in its own subnet?

  - by Bruce

  For a LAN, instead of a switch, I have built a topology where each machine is connected to a router. Each host is assigned an IP address from 10/8. Here are the interface details: Lets say I ping 10.16.0.3 from this host. The routing table of 10.16.0.2 has been configured to use the router (10.16.0.1) as the default gateway. But since the destination IP address (10.16.0.3) is in the same subnet it sends out an ARP broadcast. I want to disable this behavior of sending an ARP broadcast and instead force it to use the routing table. How do I accomplish this?

  Read the article

• Why did Google remove the search box in developer tool from Chrome 22 stable release?

  - by Bruce

  In previous version of Chrome, there's the search box in developer tool, on the right top when I open it, just as shown below. (Sorry I can't upload image cuz' I don't have enough reputation for now.) http://i.minus.com/iklSx2vi0uzFB.JPG But, after I upgraded to the first release of Chrome 22 yesterday, that search box was gone, as shown below. http://i.minus.com/ibxXt9wnBekR7E.JPG It is such a useful search box that I rely on all the time, to search for something, or to validate an xpath. So does Google just 'hide' it somewhere else? Or do they really remove it? Anyone know why they made such changes?

  Read the article

• How do I get VDPAU working with Ubuntu 9.1?

  - by Brad Robertson

  What do I need to do to get MKV HD videos playing with VDPAU and also Blu-ray discs? Lots of people say you need to compile the latest MPlayer (which I haven't had luck doing) for VDPAU. I found an mplayer ppa that says it has VDPAU compiled into it so I'd like to use that. What packages do I need for playing MKV files and Blu-ray with the video decoding offloaded to my GPU? So far I haven't had any luck with any of the tutorials I've found. I'm just looking for a quick synopsis that will tell me what I'm looking for as I'm kind of shooting in the dark. (I didn't know what VDPAU was until a few days ago.)

  Read the article

• Deploy Rails app from Hudson

  - by brad

  I'm using hudson as my CI and it works great, builds run their tests, code metrics, all that good stuff. But at the moment, that's it, no automated deployment, I have to manually do that after. I haven't found any sort of capistrano plugin for hudson and I can't even see where I can just run my cap deploy after a successful build in Hudson. Does anyone have any idea what I need in order to automate a deployment to a testing server on a successful build? I'd like each commit to force a build and in term deploy to testing so I can see everything right away.

  Read the article

• java max heap size, how much is too much

  - by brad

  I'm having issues with a JRuby (rails) app running in tomcat. Occasionally page requests can take up to a minute to return (even though the rails logs processed the request in seconds so it's obviously a tomcat issue). I'm wondering what settings are optimal for the java heap size. I know there's no definitive answer, but I thought maybe someone could comment on my setup. I'm on a small EC2 instance which has 1.7g ram. I have the following JAVA_OPTS: -Xmx1536m -Xms256m -XX:MaxPermSize=256m -XX:+CMSClassUnloadingEnabled My first thought is that Xmx is too high. If I only have 1.7gb and I allocated 1.5gb to java, i feel like I'll get a lot of paging. Typically my java process shows (in top) 1.1g res memory and 2g virtual. I also read somewhere that setting the Xms and Xmx to the same size will help as it eliminates time spend on memory allocation. I'm not a java person but I've been tasked with figuring out this problem and I'm trying to find out where to start. Any tips are greatly appreciated!! update I've started analyzing the garbage collection dumps using -XX:+PrintGCDetails When i notice these occasional long load times, the gc logs go nuts. the last one I did (which took 25s to complete) I had gc log lines such as: 1720.267: [GC 1720.267: [DefNew: 27712K->16K(31104K), 0.0068020 secs] 281792K->254096K(444112K), 0.0069440 secs] 1720.294: [GC 1720.294: [DefNew: 27728K->0K(31104K), 0.0343340 secs] 281808K->254080K(444112K), 0.0344910 secs] about 300 of them on a single request!!! Now, I don't totally understand why it's always GC'ng from ~28m down to 0 over and over.

  Read the article

• need to delete files owned by apache - unsure how to do that

  - by Brad

  Running apache on rhel server and sometimes I need to delete some files that I can not using my FTP program, because the FTP account I am logged into is not the apache user. I am on a Mac and there must be a way to accomplish this via terminal by either SSH'ing into the server. What credentials would I need to ssh into the server and delete the files/folders owned by apache Screen shot will show you what I mean when the file is owned by the apache user/group: http://cl.ly/e2192e6aadc8e4688c33 Any help is appreciated.

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >