Search Results

Search found 4981 results on 200 pages for 'dean mark anthony'.

Page 7/200 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • Utilize two gateways on the same network same interface with load balancing

    - by RushPL
    My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

    Read the article

  • How to auto mark tape as free in DPM 2012?

    - by Massimo
    I have a backup server running System Center Data Protection Manager 2012, connected to a couple of tape drives (no library). I also have, of course, some tapes. Tape rotation is manual. The tape have been used before, by DPM itself (but the server has been completely rebuilt) and by other backup softwares; they are not emtpy. But they contain no data that DPM knows and/or wants to preserve, so they can be marked as free without having to run forcefreetape.ps1. When a tape is placed into the drive, it is required to perform an inventory, have it recognized as an imported tape and then mark it as free; otherwise DPM will simply refuse to use it. How can I tell DPM to automatically treat those imported tapes as free? And, of course, I do not want to reuse real backup tapes if by chance they get put into the drives before their expiration date, so the solution should mark imported tapes as free, but should not do the same with real, non-expired tapes.

    Read the article

  • Exclamation mark used with assert method in its parameters.

    - by Maxsy
    Okay this has been lingering in my head for quite a while now. In ruby on rails unit testing there is an exclamation mark with the assert method. Here is an example test "No empty values to be inserted" do product = Produce.new assert !product.save end Let me know the function of the exclamation mark. Quick replies appreciated. Thanks.

    Read the article

  • Does Apple approve a kind of mark-up language for AppStore?

    - by Eonil
    AppStore now rejects applications made with non-Apple like languages. (with modified contract) However, is it allowed using declarative mark-up language formed with XML? (like XHTML, but different schema) The declarative mark-up is a code too, but not a script or logic code. Just a passive, static data, but forms some layout and part of an application logic.

    Read the article

  • Mark your calendar! Live OPN Partnercast on Oracle Cloud Applications

    - by Catalin Teodor
    Tune in on Wednesday, August 27 at 10 AM PDT to watch a LIVE OPN PartnerCast focused on Oracle Cloud Applications update for partners. Topics include Oracle Taleo Business Edition, Oracle Taleo Learn, Oracle Fusion HCM. Stream it live from the OPN homepage. Viewers will have the opportunity to submit questions and share comments during the live event via Twitter by using @oraclepartners or #OPN in your tweets.

    Read the article

  • When to mark a user story as done in scrum?

    - by Saeed Neamati
    There is a notion in scrum that emphasizes delivery of workable units at the end of each sprint. Each workable unit also maps directly of indirectly to a user story and when in new sprint PO introduces new PBI (new user stories), this means that practically team can't always go back to previous user stories to do the rest of the job, which in turn means that when you implement a user story, you should do it as complete as it's known to the team in that time, and you shouldn't forget anything (something like "I'm sorry, I've forgotten to implement validation for that input control" or "I didn't know that cross-browser check is part of the user story"). At the other hand, test, backward compatibility, acceptance criteria, deployment and more and more concepts come after each user story. So, when can team members know that the user story is done completely, not just for demo, and start a new one?

    Read the article

  • Why does Google mark one e-mail as spam while does not the other?

    - by nKn
    I've a Postfix installation which works fine, I don't get any trouble with mails sent through a mail client (in my case, Thunderbird or RoundCube) when the To: address is a GMail account. However, I recently needed to use the PHPMailer tool to send some e-mails to some GMail accounts, so I configured an account to be used via SASL authentication + TLS. I don't mean mass mailing, just 2-3 mails. If I send the e-mail from the Thunderbird or RoundCube clients, the mail is not marked as spam. However, if I use PHPMailer, it always gets catalogued as spam. So I compared both headers and I just can't find the reason why the second is marked as spam while the first one is just ok. The first header sent from a mail client which is not marked as spam: Delivered-To: [email protected] Received: by 10.76.153.102 with SMTP id vf6csp230573oab; Tue, 19 Aug 2014 11:08:19 -0700 (PDT) X-Received: by 10.60.23.39 with SMTP id j7mr45544050oef.20.1408471699715; Tue, 19 Aug 2014 11:08:19 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.mydomain.com (X.ip-92-222-X.eu. [92.222.X.X]) by mx.google.com with ESMTPS id t5si27115082oej.10.2014.08.19.11.08.18 for <[email protected]> (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 19 Aug 2014 11:08:19 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) client-ip=92.222.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) [email protected]; dkim=pass (test mode) [email protected] Received: by mail.mydomain.com (Postfix, from userid 111) id D8F69120293D; Tue, 19 Aug 2014 19:08:17 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471697; bh=wKMX9gkQ7tCLv8ezrG5t4bICm/SSLQsNfTdZMToksWw=; h=Date:From:To:Subject:From; b=qRNcYVdmk+n3D1uuv0FInTx7/LzH2ojck9DgCmabFPvfke233lkojUOjezCUGx7iV DL8EayZ28mzzzHpB7ETeMzop/5OS3BmvFtGKVD9gzc78cDIFXTDoRFAnkRWDR2IOxI SOn5tiyODTFpkbDgJOndzQ6qL5K0S9ASNGCZrNL4= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on vpsX.ovh.net X-Spam-Level: X-Spam-Status: No, score=-1.0 required=3.0 tests=ALL_TRUSTED,T_DKIM_INVALID autolearn=ham autolearn_force=no version=3.4.0 Received: from [192.168.1.111] (unknown [77.231.X.X]) (using TLSv1 with cipher ECDHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) (Authenticated sender: [email protected]) by mail.mydomain.com (Postfix) with ESMTPSA id 910341202624 for <[email protected]>; Tue, 19 Aug 2014 19:08:17 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471697; bh=wKMX9gkQ7tCLv8ezrG5t4bICm/SSLQsNfTdZMToksWw=; h=Date:From:To:Subject:From; b=qRNcYVdmk+n3D1uuv0FInTx7/LzH2ojck9DgCmabFPvfke233lkojUOjezCUGx7iV DL8EayZ28mzzzHpB7ETeMzop/5OS3BmvFtGKVD9gzc78cDIFXTDoRFAnkRWDR2IOxI SOn5tiyODTFpkbDgJOndzQ6qL5K0S9ASNGCZrNL4= Message-ID: <[email protected]> Date: Tue, 19 Aug 2014 19:08:24 +0100 From: My Name <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: My other account <[email protected]> Subject: . Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit . The second header sent from PHPMailer which is always marked as spam: Delivered-To: [email protected] Received: by 10.76.153.102 with SMTP id vf6csp230832oab; Tue, 19 Aug 2014 11:12:10 -0700 (PDT) X-Received: by 10.60.121.67 with SMTP id li3mr44086252oeb.17.1408471930520; Tue, 19 Aug 2014 11:12:10 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.mydomain.com (X.ip-92-222-X.eu. [92.222.X.X]) by mx.google.com with ESMTPS id w8si27103806obn.30.2014.08.19.11.12.10 for <[email protected]> (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 19 Aug 2014 11:12:10 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) client-ip=92.222.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) [email protected]; dkim=pass (test mode) [email protected] Received: by mail.mydomain.com (Postfix, from userid 111) id 1999D120293D; Tue, 19 Aug 2014 19:12:09 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471929; bh=N1JuHq1S+8GrjHcEK3xn8P1JS+ygEBv5LKe0BiXuVJo=; h=Date:To:From:Reply-to:Subject:From; b=K7tcPyArzSTY91VEw6mAAFtDurSGwgTLGkfUZdC5mqsg0g/1LzmZkgwdjj4NdJa6M E2kDz3dwYN8FcZmbampJYFXxj4NQVtSnzjiWV40rpfOFqD2rXDGNIyB2QOjBZZ4WK3 7s4lyoJ/BrdQH4en8ctLVsDHed/KpHD4iGFEl67E= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on vpsX.ovh.net X-Spam-Level: X-Spam-Status: No, score=-1.0 required=3.0 tests=ALL_TRUSTED,T_DKIM_INVALID autolearn=ham autolearn_force=no version=3.4.0 Received: from rpi.mydomain.com (unknown [77.231.X.X]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: [email protected]) by mail.mydomain.com (Postfix) with ESMTPSA id B42AF1202624 for <[email protected]>; Tue, 19 Aug 2014 19:12:08 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471928; bh=N1JuHq1S+8GrjHcEK3xn8P1JS+ygEBv5LKe0BiXuVJo=; h=Date:To:From:Reply-to:Subject:From; b=iXPM0tS36swudPTT4FOHHtPi5Ll6LbR60kNqCinZ8utcWoFE31SFTpoMEq5aCM5ux wQMdFiN8c6vkjRGabmvqFTTIbwJsrToHo/4+Lt5HEBoQQE2Y3T+xGmnmGAHCS6stKB yb7SVmtrIAsVtSMKA8VYIbmu2oYqV3afYt7g0OMQ= Date: Tue, 19 Aug 2014 20:12:07 +0200 To: [email protected] From: Trying another account <[email protected]> Reply-to: Trying another account <[email protected]> Subject: . Message-ID: <[email protected]> X-Priority: 3 X-Mailer: PHPMailer 5.1 (phpmailer.sourceforge.net) MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="UTF-8" . I also tried: Adding a User-Agent header to match the first one. Removing the X-Mailer header. No one of them made a difference. Is there some significant difference which is making the second e-mail to be marked as spam by Google?

    Read the article

  • What is Mark Shuttleworth's "Easter eggs" blog a reference to? [closed]

    - by fluteflute
    I saw this blog post today, and I was wondering if there's some meaning within the Ubuntu community that I've missed? (I know what an easter egg is in a computer context.) One of our ducks has started dropping eggs in random locations in the garden. I don’t know which duck, but I assume it’s one of the new females we took in from the SPCA, who hasn’t figured out “nesting” yet. I do love ‘em but they’re not African Grey’s in the IQ department. Anyhow, I think I finally understand why people hide eggs in the garden at Easter. Because ducks used to do it for them! I suppose, for millennia, this has been the season to go hunting for eggs. Now we just substitute chocolate ones instead. For the moment, I’ve kept them in a cool shady spot while I keep an eye out for an actual nest. If a polecat doesn’t find them first, I may be able to slip them onto the nest in time for them to get hatched along with some cousins.

    Read the article

  • Join me on MSDN Radio next Monday Mark your calendar.

    Announcement: MSDN Radio: The ASP.NET Developer Evolved with Joe Stagner Event ID: 1032448575 Date: Monday, April 12, 2010 9:00 AM Pacific Time (US & Canada) 30 Minutes Event Overview You may know him as Mr. How Do I with Microsoft ASP.NET. For the last few years Joe has been busy working with the ASP.NET product team to simplify and educate developers on what's possible with the latest web tools. We talk with Joe about how the web developer is able to learn about and leverage new tools...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Creating sitemap for Googlebot - how to mark dynamic content / dynamic subpages?

    - by ojek
    I have a website that is an Internet forum. This forum has many categories, and a single category page that contains a lot of subpages with listed threads. This Internet forum is brand new, and about a week ago I filled it with a few hundred thousand threads. I then looked at my Google Webmasters Tools page to see any changes in indexing, but the index went up from 300 to about 1200, so that means it did not index my added threads (although it added something). The following is what my sitemap.xml contains, which I uploaded to their website. Of course there is a lot more code, this is just a snippet for a single category. In my real sitemap file I have all the categories listed as below: <url> <loc>http://mysite.com/Forums/Physics</loc> <changefreq>hourly</changefreq> </url> Now, I would expect Googlebot to go into mysite.com/Forums/Physics, and crawl through all the subpages with thread links, and then crawl inside of each thread and index its content. How can I achieve this? Also if this is unclear, I will add a real link to my website.

    Read the article

  • Creating sitemap for google bot - how to mark dynamic content / dynamic subpages?

    - by ojek
    I have a website that is internet forum. This forum has many categories, and single category page contains alot of subpages with listed threads. This internet forum is brand new, and about a week ago I filled it with few hundred thousands threads. I then looked at google webmasters page to see any changes in indexing, but the index went up from 300 to about 1200, so that means it did not index my added threads (although it added something). This is what my sitemap.xml contains which I uploaded on their website (of course there is a lot more of the code, this is just a snipped for a single category, in my real sitemap file I have all the categories listed as below): <url> <loc>http://mysite.com/Forums/Physics</loc> <changefreq>hourly</changefreq> </url> Now, I would expect google bot to go into http://mysite.com/Forums/Physics, and move through all the subpages with thread links, and then get inside of each thread and index it's content. How can I do this? Also if this will be unclear, I will add a real link to my website.

    Read the article

  • How do I run gtk demos?

    - by Runner
    They are located under: share\gtk-2.0\demo But none of them contains a main function, how can I make the following textscroll.c actually work: /* Text Widget/Automatic scrolling * * This example demonstrates how to use the gravity of * GtkTextMarks to keep a text view scrolled to the bottom * while appending text. */ #include <gtk/gtk.h> #include "demo-common.h" /* Scroll to the end of the buffer. */ static gboolean scroll_to_end (GtkTextView *textview) { GtkTextBuffer *buffer; GtkTextIter iter; GtkTextMark *mark; char *spaces; static int count; buffer = gtk_text_view_get_buffer (textview); /* Get "end" mark. It's located at the end of buffer because * of right gravity */ mark = gtk_text_buffer_get_mark (buffer, "end"); gtk_text_buffer_get_iter_at_mark (buffer, &iter, mark); /* and insert some text at its position, the iter will be * revalidated after insertion to point to the end of inserted text */ spaces = g_strnfill (count++, ' '); gtk_text_buffer_insert (buffer, &iter, "\n", -1); gtk_text_buffer_insert (buffer, &iter, spaces, -1); gtk_text_buffer_insert (buffer, &iter, "Scroll to end scroll to end scroll " "to end scroll to end ", -1); g_free (spaces); /* Now scroll the end mark onscreen. */ gtk_text_view_scroll_mark_onscreen (textview, mark); /* Emulate typewriter behavior, shift to the left if we * are far enough to the right. */ if (count > 150) count = 0; return TRUE; } /* Scroll to the bottom of the buffer. */ static gboolean scroll_to_bottom (GtkTextView *textview) { GtkTextBuffer *buffer; GtkTextIter iter; GtkTextMark *mark; char *spaces; static int count; buffer = gtk_text_view_get_buffer (textview); /* Get end iterator */ gtk_text_buffer_get_end_iter (buffer, &iter); /* and insert some text at it, the iter will be revalidated * after insertion to point to the end of inserted text */ spaces = g_strnfill (count++, ' '); gtk_text_buffer_insert (buffer, &iter, "\n", -1); gtk_text_buffer_insert (buffer, &iter, spaces, -1); gtk_text_buffer_insert (buffer, &iter, "Scroll to bottom scroll to bottom scroll " "to bottom scroll to bottom", -1); g_free (spaces); /* Move the iterator to the beginning of line, so we don't scroll * in horizontal direction */ gtk_text_iter_set_line_offset (&iter, 0); /* and place the mark at iter. the mark will stay there after we * insert some text at the end because it has right gravity. */ mark = gtk_text_buffer_get_mark (buffer, "scroll"); gtk_text_buffer_move_mark (buffer, mark, &iter); /* Scroll the mark onscreen. */ gtk_text_view_scroll_mark_onscreen (textview, mark); /* Shift text back if we got enough to the right. */ if (count > 40) count = 0; return TRUE; } static guint setup_scroll (GtkTextView *textview, gboolean to_end) { GtkTextBuffer *buffer; GtkTextIter iter; buffer = gtk_text_view_get_buffer (textview); gtk_text_buffer_get_end_iter (buffer, &iter); if (to_end) { /* If we want to scroll to the end, including horizontal scrolling, * then we just create a mark with right gravity at the end of the * buffer. It will stay at the end unless explicitely moved with * gtk_text_buffer_move_mark. */ gtk_text_buffer_create_mark (buffer, "end", &iter, FALSE); /* Add scrolling timeout. */ return g_timeout_add (50, (GSourceFunc) scroll_to_end, textview); } else { /* If we want to scroll to the bottom, but not scroll horizontally, * then an end mark won't do the job. Just create a mark so we can * use it with gtk_text_view_scroll_mark_onscreen, we'll position it * explicitely when needed. Use left gravity so the mark stays where * we put it after inserting new text. */ gtk_text_buffer_create_mark (buffer, "scroll", &iter, TRUE); /* Add scrolling timeout. */ return g_timeout_add (100, (GSourceFunc) scroll_to_bottom, textview); } } static void remove_timeout (GtkWidget *window, gpointer timeout) { g_source_remove (GPOINTER_TO_UINT (timeout)); } static void create_text_view (GtkWidget *hbox, gboolean to_end) { GtkWidget *swindow; GtkWidget *textview; guint timeout; swindow = gtk_scrolled_window_new (NULL, NULL); gtk_box_pack_start (GTK_BOX (hbox), swindow, TRUE, TRUE, 0); textview = gtk_text_view_new (); gtk_container_add (GTK_CONTAINER (swindow), textview); timeout = setup_scroll (GTK_TEXT_VIEW (textview), to_end); /* Remove the timeout in destroy handler, so we don't try to * scroll destroyed widget. */ g_signal_connect (textview, "destroy", G_CALLBACK (remove_timeout), GUINT_TO_POINTER (timeout)); } GtkWidget * do_textscroll (GtkWidget *do_widget) { static GtkWidget *window = NULL; if (!window) { GtkWidget *hbox; window = gtk_window_new (GTK_WINDOW_TOPLEVEL); g_signal_connect (window, "destroy", G_CALLBACK (gtk_widget_destroyed), &window); gtk_window_set_default_size (GTK_WINDOW (window), 600, 400); hbox = gtk_hbox_new (TRUE, 6); gtk_container_add (GTK_CONTAINER (window), hbox); create_text_view (hbox, TRUE); create_text_view (hbox, FALSE); } if (!gtk_widget_get_visible (window)) gtk_widget_show_all (window); else gtk_widget_destroy (window); return window; }

    Read the article

  • wifi hardware switch doesn't work on a Dell 1018

    - by user42566
    I have a problem with my Dell 1018 Inspiron. I can't switch the wifi on, through the key on the keyboard. I think it's a driver problem since Ubuntu 11.10. This are the versions i tried: Ubuntu 10.04 / 10.10 It's possible to install the driver by hand: sudo add-apt-repository ppa:lexical/hwe-wireless sudo apt-get update sudo apt-get install rtl8192ce-dkms Ubuntu 11.04 It works out of the box Ubuntu 11.10 / 12.04 I haven’t found any solution for these versions. The "ppa:lexical/hwe-wireless" doesn't work for these versions. It says Can not find package rtl8192ce-dkms. The window of additional drivers is empty. So I can't install the driver. The wired network works good. Here is some information: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes sudo lshw -class network *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 5c:26:0a:0d:20:10 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0f2c000-f0f2cfff memory:f0f18000-f0f1bfff *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 01 serial: 70:f1:a1:fe:15:bd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-22-generic-pae firmware=N/A ip=192.168.1.76 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:3000(size=256) memory:f0100000-f0103fff mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1127 Syntek mark@mark-Inspiron-1018:~$

    Read the article

  • Is W3C Valid XHTML and CSS Code, Semantic and Accessible Mark-up enough for site's SEO?

    - by metal-gear-solid
    I created a web-site for a client with W3C Valid XHTML and CSS Code, Semantic and Accessible Mark-up and I had said to client my code will be SEO friendly. Theyway i code it will be good for your site SEO. I putted my all efforts to make good code Now my non-techie Client is asking me, Should him go for any SEO company even after providing SEO friendly site by me? What other SEO companies will do for him other than what we can't by W3C Valid XHTML, CSS , Semantic and Accessible Mark-up?

    Read the article

  • Setup routing and iptables for new VPN connection to redirect **only** ports 80 and 443

    - by Steve
    I have a new VPN connection (using openvpn) to allow me to route around some ISP restrictions. Whilst it is working fine, it is taking all the traffic over the vpn. This is causing me issues for downloading (my internet connection is a lot faster than the vpn allows), and for remote access. I run an ssh server, and have a daemon running that allows me to schdule downloads via my phone. I have my existing ethernet connection on eth0, and the new VPN connection on tun0. I believe I need to setup the default route to use my existing eth0 connection on the 192.168.0.0/24 network, and set the default gateway to 192.168.0.1 (my knowledge is shaky as I haven't done this for a number of years). If that is correct, then I'm not exactly sure how to do it!. My current routing table is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt 0.0.0.0 10.51.0.169 0.0.0.0 UG 0 0 0 tun0 0 0 0 10.51.0.1 10.51.0.169 255.255.255.255 UGH 0 0 0 tun0 0 0 0 10.51.0.169 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 0 0 0 85.25.147.49 192.168.0.1 255.255.255.255 UGH 0 0 0 eth0 0 0 0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0 0 0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 0 0 0 After fixing the routing, I believe I need to use iptables to configure prerouting or masquerading to force everything for destination port 80 or 443 over tun0. Again, I'm not exactly sure how to do this! Everything I've found on the internet is trying to do something far more complicated, and trying to sort the wood from the trees is proving difficult. Any help would be much appreciated. UPDATE So far, from the various sources, I've cobbled together the following: #!/bin/sh DEV1=eth0 IP1=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 192.` GW1=192.168.0.1 TABLE1=internet TABLE2=vpn DEV2=tun0 IP2=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` GW2=`route -n | grep 'UG[ \t]' | awk '{print $2}'` ip route flush table $TABLE1 ip route flush table $TABLE2 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table $TABLE1 $ROUTE ip route add table $TABLE2 $ROUTE done ip route add table $TABLE1 $GW1 dev $DEV1 src $IP1 ip route add table $TABLE2 $GW2 dev $DEV2 src $IP2 ip route add table $TABLE1 default via $GW1 ip route add table $TABLE2 default via $GW2 echo "1" > /proc/sys/net/ipv4/ip_forward echo "1" > /proc/sys/net/ipv4/ip_dynaddr ip rule add from $IP1 lookup $TABLE1 ip rule add from $IP2 lookup $TABLE2 ip rule add fwmark 1 lookup $TABLE1 ip rule add fwmark 2 lookup $TABLE2 iptables -t nat -A POSTROUTING -o $DEV1 -j SNAT --to-source $IP1 iptables -t nat -A POSTROUTING -o $DEV2 -j SNAT --to-source $IP2 iptables -t nat -A PREROUTING -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -t nat -A PREROUTING -i $DEV1 -m state --state NEW -j CONNMARK --set-mark 1 iptables -t nat -A PREROUTING -i $DEV2 -m state --state NEW -j CONNMARK --set-mark 2 iptables -t nat -A PREROUTING -m connmark --mark 1 -j MARK --set-mark 1 iptables -t nat -A PREROUTING -m connmark --mark 2 -j MARK --set-mark 2 iptables -t nat -A PREROUTING -m state --state NEW -m connmark ! --mark 0 -j CONNMARK --save-mark iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 80 -j CONNMARK --set-mark 2 iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 443 -j CONNMARK --set-mark 2 route del default route add default gw 192.168.0.1 eth0 Now this seems to be working. Except it isn't! Connections to the blocked websites are going through, connections not on ports 80 and 443 are using the non-VPN connection. However port 80 and 443 connections that aren't to the blocked websites are using the non-VPN connection too! As the general goal has been reached, I'm relatively happy, but it would be nice to know why it isn't working exactly right. Any ideas? For reference, I now have 3 routing tables, main, internet, and vpn. The listing of them is as follows... Main: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 Internet: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 192.168.0.1 dev eth0 scope link src 192.168.0.73 VPN: default via 10.38.0.205 dev tun0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1

    Read the article

  • VoiceXML Prompt & SSML <mark> element. How to read prompt from the specified position?

    - by EugeneP
    <mark> element informs that reading went on to some point. But is there a way we could read the prompt again from the specified position returned by mark (name) id? It could be useful in such a scenario: we are reading a long text. Then the user commands: PAUSE. We stop. Then the user would say "Go on". And we continue to read the prompt from the last position. IS that possible at all? And I would ask yet another question. No matter with the usage of SSML or not: How to make it work - pause the prompt reading and then continue from the position where we stopped? Pause means "take full control over that pause", so that we could continue whenever we wanted. Dynamically.

    Read the article

  • min() and max() give error: TypeError: 'float' object is not iterable

    - by PythonUser3.3
    markList=[] Lmark=0 Hmark=0 while True: mark=float(input("Enter your marks here(Click -1 to exit)")) if mark == -1: break markList.append(mark) markList.sort() mid = len(markList)//2 if len(markList)%2==0: median=(markList[mid]+ markList[mid-1])/2 print("Median:", median) else: print("Median:" , markList[mid]) Lmark==(min(mark)) print("The lowest mark is", Lmark) Hmark==(max(mark)) print("The highest mark is", Hmark) My program is a basic grade calculator using lists. My program asks the user to input their grades into a list in which it then calculates your average and finds your lowest and highest mark. I have found the average but I can't seem to figure out how to find the lowest and highest grade. Can you please show me pr tell me what to do?

    Read the article

  • how to limit upload bandwidth per user in linux?

    - by Gihan Lasita
    Can anyone provide the tc command to limit upload bandwidth per user in Debian Lenny? I found that to mark packets per user with iptables I can use the following command iptables -t mangle -A OUTPUT -p tcp -m owner --uid-owner testuser -j MARK --set-mark 500 but I have no idea how to use tc update by running following commands, i managed to limit testuser upload bandwidth to 10Mbit iptables -t mangle -N HTB_OUT iptables -t mangle -I POSTROUTING -j HTB_OUT iptables -t mangle -A HTB_OUT -j MARK --set-mark 30 iptables -t mangle -A HTB_OUT -m owner --uid-owner testuser -j MARK --set-mark 10 tc qdisc replace dev eth0 root handle 1: htb default 30 tc class replace dev eth0 parent 1: classid 1:1 htb rate 10Mbit burst 5k tc class replace dev eth0 parent 1:1 classid 1:10 htb rate 10Mbit ceil 10Mbit tc qdisc replace dev eth0 parent 1:10 handle 10: sfq perturb 10 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 10 fw flowid 1:10 now the problem is, i do not want to limit testuser's FTP bandwidth but by running above commands FTP speed also limited to 10Mbit. Regards

    Read the article

  • How to mark messages that are received by an java application using javax Mail Api?

    - by telebog
    I want to create an application that gets all e-mails from an e-mail account using imap. When I first run the application I get all mails, than if I run it again I want to mark the messages that was read before so I can receive only new messages. I found that Message Object contains Flags(System Flags and User defined flags), but I can't manage to set one user defined flag. It is possible to mark the messages received by my application on the e-mail account, or I have to retain all message ids and every time when I get messages from imap I have to compare their id with retained ids and get only the messages that has different ids?

    Read the article

  • Can't get network bridging to work

    - by Antonis Christofides
    I'm trying to make network bridging to work on a Debian squeeze (I'm experimenting in order to make a QEMU/KVM virtual machine that will be visible to the outside network as if it were a distinct machine). The problem is that when I type brctl addif br0 eth0 then I lose connectivity to the network until I type brctl delif br0 eth0. More specifically, here's how my machine looks like before I do anything (essentially eth0 is listening on 147.102.160.153): root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591848sec preferred_lft 604648sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 4c:ed:de:8e:44:d7 brd ff:ff:ff:ff:ff:ff 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether ee:7c:88:59:d0:e8 brd ff:ff:ff:ff:ff:ff Now let me add the bridge: root@laura:/home/anthony# brctl addbr br0 root@laura:/home/anthony# ip tuntap add dev tap0 mode tap root@laura:/home/anthony# ip link set tap0 up root@laura:/home/anthony# brctl addif br0 tap0 Until here everything continues to work normally. Finally, I try to add eth0 to the bridge: root@laura:/home/anthony# brctl addif br0 eth0 At this point, I no longer have a network connection. If I try to ping something, it tells "Destination Host Unreachable". The output of ip addr show seems normal: root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591908sec preferred_lft 604708sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever [snip wlan0, vboxnet0 and pan0, which are down and irrelevant] 8: br0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff 9: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff inet6 fe80::1430:f2ff:fe67:ab75/64 scope link valid_lft forever preferred_lft forever Also: root@laura:/home/anthony# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 147.102.160.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 147.102.160.200 0.0.0.0 UG 0 0 0 eth0 I can't understand what I'm doing wrong. I want the machine to continue to listen on 147.102.160.153 on eth0, and in addition to that I want to have a tap0 interface, bridged to eth0, that will be available to the guest machine so that the latter listens on another ip address (say 147.102.160.205). (If there's another way to achieve what I want, I'm also interested.)

    Read the article

  • Tweak Conky Layout via a script

    - by begtognen
    I'm using a script in Conky in order to display my new gmail on my desktop. It works beautifully, but is kind of ugly, and I'm not sure how to fix it. What I've currently got looks like this: And what I'd like is this: Any ideas for how to make that happen are much appreciated. Here's the script I'm currently using (I think I've snipped out the correct part, if I haven't please let me know.) #!/usr/bin/perl use Switch; use Text::Wrap; my $what=$ARGV[0]; $user="username"; #username for gmail account $pass="password"; #password for gmail account $file="/tmp/gmail.html"; #temporary file to store gmail #wrap format for subject $Text::Wrap::columns=65; #Number of columns to wrap subject at $initial_tab=""; #Tab for first line of subject $subsequent_tab="\t"; #tab for wrapped lines $quote="\""; #put quotes around subject #limit the number of emails to be displayed $emails=-1; #if -1 display all emails &passwd; #give password the proper url character encoding switch($what){ #determine what the user wants case "n" {&gmail; print "$new\n";} #print number of new emails case "s" { #print $from and $subj for new email &gmail; if ($new0){ my $size=@from; if ($emails!=-1 && $size$emails){$size=$emails;} #limit number of emails displayed for(my $i=0; $i$emails){print "$emails out of $size new emails displayed\n";} } } case "e" { #print number of new emails, $from, and $subj &gmail; if($new==0){print "You have no new emails.\n";} else{ print "You have $new new email(s).\n"; my $size=@from; if ($emails!=-1 && $size$emails){$size=$emails;} #limit number of emails displayed for(my $i=0; $i$emails){print "$emails out of $size new emails displayed\n";} } } else { print "Usage Error: gmail.pl \n"; print "\tn displays number of new emails\n"; print "\ts displays from line and subject line for each new email.\n"; print "\te displays the number of new emails and from line plus \n"; print "\t\tsubject line for each new email.\n"; } #didn't give proper option } sub gmail{ if(!(-e $file)){ #create file if it does not exists `touch $file`; } #get new emails `wget -O - https://$user:$pass\@mail.google.com/mail/feed/atom --no-check-certificate $file`; open(IN, $file); #open $file my $i=0; #initialize count $new=0; #initialize new emails to 0 my $flag=0; while(){ #cycle through $file if(//){$flag=1;} elsif(/(\d+)/){$new=$1;} #grab number of new emails elsif($flag==1){ if(/.+/){push(@subj, &msg);} #grab new email titles elsif(/(.+)/){push(@from, $1); $flag=0;} #grab new email from lines } } close(IN); #close $file } sub passwd{ #change to url escape codes in password #URL ESCAPE CODES $_=$pass; s/\%/\%25/g; s/\#/\%23/g; s/\$/\%24/g; s/\&/\%26/g; s/\//\%2F/g; s/\:/\%3A/g; s/\;/\%3B/g; s/\/\%3E/g; s/\?/\%3F/g; s/\@/\%40/g; s/\[/\%5B/g; s/\\/\%5C/g; s/\]/\%5D/g; s/\^/\%5E/g; s/\`/\%60/g; s/\{/\%7B/g; s/\|/\%7C/g; s/\}/\%7D/g; s/\~/\%7E/g; $pass=$_; } sub msg{ #THE HTML CODED CHARACTER SET [ISO-8859-1] chomp; s/(.+)/$1/; #get just the subject #now replace any special characters s/\&\#33\;/!/g; #Exclamation mark s/\&\#34\;/"/g; s/\"\;/"/g; #Quotation mark s/\&\#35\;/#/g; #Number sign s/\&\#36\;/\$/g; #Dollar sign s/\&\#37\;/%/g; #Percent sign s/\&\#38\;/&/g; s/\&\;/&/g; #Ampersand s/\&\#39\;/'/g; #Apostrophe s/\&\#40\;/(/g; #Left parenthesis s/\&\#41\;/)/g; #Right parenthesis s/\&\#42\;/*/g; #Asterisk s/\&\#43\;/+/g; #Plus sign s/\&\#44\;/,/g; #Comma s/\&\#45\;/-/g; #Hyphen s/\&\#46\;/./g; #Period (fullstop) s/\&\#47\;/\//g; #Solidus (slash) s/\&\#58\;/:/g; #Colon s/\&\#59\;/\;/g; #Semi-colon s/\&\#60\;//g; s/\>\;//g; #Greater than s/\&\#63\;/\?/g; #Question mark s/\&\#64\;/\@/g; #Commercial at s/\&\#91\;/\[/g; #Left square bracket s/\&\#92\;/\\/g; #Reverse solidus (backslash) s/\&\#93\;/\]/g; #Right square bracket s/\&\#94\;/\^/g; #Caret s/\&\#95\;/_/g; #Horizontal bar (underscore) s/\&\#96\;/\`/g; #Acute accent s/\&\#123\;/\{/g; #Left curly brace s/\&\#124\;/|/g; #Vertical bar s/\&\#125\;/\}/g; #Right curly brace s/\&\#126\;/~/g; #Tilde s/\&\#161\;/¡/g; #Inverted exclamation s/\&\#162\;/¢/g; #Cent sign s/\&\#163\;/£/g; #Pound sterling s/\&\#164\;/¤/g; #General currency sign s/\&\#165\;/¥/g; #Yen sign s/\&\#166\;/¦/g; #Broken vertical bar s/\&\#167\;/§/g; #Section sign s/\&\#168\;/¨/g; #Umlaut (dieresis) s/\&\#169\;/©/g; s/\©\;/©/g; #Copyright s/\&\#170\;/ª/g; #Feminine ordinal s/\&\#171\;/«/g; #Left angle quote, guillemotleft s/\&\#172\;/¬/g; #Not sign s/\&\#174\;/®/g; #Registered trademark s/\&\#175\;/¯/g; #Macron accent s/\&\#176\;/°/g; #Degree sign s/\&\#177\;/±/g; #Plus or minus s/\&\#178\;/²/g; #Superscript two s/\&\#179\;/³/g; #Superscript three s/\&\#180\;/´/g; #Acute accent s/\&\#181\;/µ/g; #Micro sign s/\&\#182\;/¶/g; #Paragraph sign s/\&\#183\;/·/g; #Middle dot s/\&\#184\;/¸/g; #Cedilla s/\&\#185\;/¹/g; #Superscript one s/\&\#186\;/º/g; #Masculine ordinal s/\&\#187\;/»/g; #Right angle quote, guillemotright s/\&\#188\;/¼/g; s/\¼\;/¼/g; # Fraction one-fourth s/\&\#189\;/½/g; s/\½\;/½/g; # Fraction one-half s/\&\#190\;/¾/g; s/\¾\;/¾/g; # Fraction three-fourths s/\&\#191\;/¿/g; #Inverted question mark s/\&\#192\;/À/g; #Capital A, grave accent s/\&\#193\;/Á/g; #Capital A, acute accent s/\&\#194\;/Â/g; #Capital A, circumflex accent s/\&\#195\;/Ã/g; #Capital A, tilde s/\&\#196\;/Ä/g; #Capital A, dieresis or umlaut mark s/\&\#197\;/Å/g; #Capital A, ring s/\&\#198\;/Æ/g; #Capital AE dipthong (ligature) s/\&\#199\;/Ç/g; #Capital C, cedilla s/\&\#200\;/È/g; #Capital E, grave accent s/\&\#201\;/É/g; #Capital E, acute accent s/\&\#202\;/Ê/g; #Capital E, circumflex accent s/\&\#203\;/Ë/g; #Capital E, dieresis or umlaut mark s/\&\#204\;/Ì/g; #Capital I, grave accent s/\&\#205\;/Í/g; #Capital I, acute accent s/\&\#206\;/Î/g; #Capital I, circumflex accent s/\&\#207\;/Ï/g; #Capital I, dieresis or umlaut mark s/\&\#208\;/Ð/g; #Capital Eth, Icelandic s/\&\#209\;/Ñ/g; #Capital N, tilde s/\&\#210\;/Ò/g; #Capital O, grave accent s/\&\#211\;/Ó/g; #Capital O, acute accent s/\&\#212\;/Ô/g; #Capital O, circumflex accent s/\&\#213\;/Õ/g; #Capital O, tilde s/\&\#214\;/Ö/g; #Capital O, dieresis or umlaut mark s/\&\#215\;/×/g; #Multiply sign s/\&\#216\;/Ø/g; #Capital O, slash s/\&\#217\;/Ù/g; #Capital U, grave accent s/\&\#218\;/Ú/g; #Capital U, acute accent s/\&\#219\;/Û/g; #Capital U, circumflex accent s/\&\#220\;/Ü/g; #Capital U, dieresis or umlaut mark s/\&\#221\;/Ý/g; #Capital Y, acute accent s/\&\#222\;/Þ/g; #Capital THORN, Icelandic s/\&\#223\;/ß/g; #Small sharp s, German (sz ligature) s/\&\#224\;/à/g; #Small a, grave accent s/\&\#225\;/á/g; #Small a, acute accent s/\&\#226\;/â/g; #Small a, circumflex accent s/\&\#227\;/ã/g; #Small a, tilde s/\&\#228\;/ä/g; #Small a, dieresis or umlaut mark s/\&\#229\;/å/g; #Small a, ring s/\&\#230\;/æ/g; #Small ae dipthong (ligature) s/\&\#231\;/ç/g; #Small c, cedilla s/\&\#232\;/è/g; #Small e, grave accent s/\&\#233\;/é/g; #Small e, acute accent s/\&\#234\;/ê/g; #Small e, circumflex accent s/\&\#235\;/ë/g; #Small e, dieresis or umlaut mark s/\&\#236\;/ì/g; #Small i, grave accent s/\&\#237\;/í/g; #Small i, acute accent s/\&\#238\;/î/g; #Small i, circumflex accent s/\&\#239\;/ï/g; #Small i, dieresis or umlaut mark s/\&\#240\;/ð/g; #Small eth, Icelandic s/\&\#241\;/ñ/g; #Small n, tilde s/\&\#242\;/ò/g; #Small o, grave accent s/\&\#243\;/ó/g; #Small o, acute accent s/\&\#244\;/ô/g; #Small o, circumflex accent s/\&\#245\;/õ/g; #Small o, tilde s/\&\#246\;/ö/g; #Small o, dieresis or umlaut mark s/\&\#247\;/÷/g; #Division sign s/\&\#248\;/ø/g; #Small o, slash s/\&\#249\;/ù/g; #Small u, grave accent s/\&\#250\;/ú/g; #Small u, acute accent s/\&\#251\;/û/g; #Small u, circumflex accent s/\&\#252\;/ü/g; #Small u, dieresis or umlaut mark s/\&\#253\;/ý/g; #Small y, acute accent s/\&\#254\;/þ/g; #Small thorn, Icelandic s/\&\#255\;/ÿ/g; #Small y, dieresis or umlaut mark s/^\s+//; return $_; }

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >