Search Results

Search found 224 results on 9 pages for 'dust'.

Page 7/9 | < Previous Page | 3 4 5 6 7 8 9  | Next Page >

  • How to identify deadlock conditions in a third-party application?

    - by Imhotep is Invisible
    I am using a third-party application to handle batch CD audio extraction via multiple FireWire attached devices, but the application frequently (though non-deterministically) hangs during the extraction. I suspect that the multithreaded application is deadlocking over some shared resource. The developer, however, suspects the problem lies elsewhere but is not addressing the problem at this time. I would like to be able to do some legwork on my end to a) prove the condition exists and b) ideally point him in the right direction. The problems: while I used to be a programmer, it's been awhile and I need to shake off the dust (last work I did was back in '99 and it was under Solaris, while the application runs under XP). Rather than there being a dearth of information online, there's almost too much to digest. Are there any suggested guides or tutorials that might help me get back up to speed sufficient enough to help identify and/or diagnose the deadlock, or are there tools or approaches that I should study up on to aid me in my task? Many thanks for all suggestions!

    Read the article

  • Future of Active FoxPro Pages - secured

    Finally some official news about Active FoxPro Pages, aka AFP. The German company BvL Bürosysteme Vertriebs GmbH bought all rights of Active FoxPro Pages from the insolvency stock. Being a former customer and intensive user of AFP since version 2.0 BvL has own interest in the continuation of AFP on current and future web servers. Together with their partners Christof Wollenhaupt (Foxpert Software Development & Consulting) and Jochen Kirstätter (IOS Indian Ocean Software Ltd) BvL will continue with development, support and marketing of AFP in the upcoming weeks. There will be an updated version of AFP, the relaunch of the website, re-enabling of activation server, re-establishment of support channel, and much more... Personally, I am relieved that this superb product made its way out of the dust of the past years. And of course, to be involved (again) in the development and support of Active FoxPro Pages gives me a big smile. Rest assured that there will be more articles on AFP soon! Here is the original announcement of 27th September 2010 from the online forum of German FoxPro Usergroup (dFPUG) - section Active FoxPro Pages: Liebe AFP Anwender, liebe FoxPro Gemeinde, nach den Insolvenzen der ProLib Software GmbH und der ProLib Tools GmbH gab es einige Verunsicherung über die Zukunft der Active FoxPro Pages. Wir können euch nun mitteilen, dass eine für alle Beteiligten positive Lösung gefunden wurde. Wir, die BvL Bürosysteme Vertriebs GmbH aus Berlin, haben sämtliche Rechte an der AFP aus der Insolvenzmasse vom Insolvenzverwalter abgekauft. Bereits 1987 wurde die BvL Bürosysteme Vertriebs GmbH gegründet und hat sich seit dem erfolgreich im Markt bewährt. Wir gehören auch schon seit Foxpro2.0 zur Foxpro-Gemeinde und auch mit der AFP2.0 haben wir unseren Einstieg in die AFP-Gemeinde vollzogen. Wir wollen die AFP nicht in irgendeine Schublade packen, sondern unser Ziel ist es, die AFP weiterzuentwickeln, speziell auch auf die kommenden Serverversionen. Unter der Homepage www.active-foxpro-pages.de wird es demnächst einen neuen Auftritt geben. An den Preisen soll sich nichts groß verändern, das Handbuch soll anständig aufgelegt werden und selbstverständlich soll der Support und die Weiterentwicklung eine große Aufmerksamkeit bekommen. Mit Christof Wollenhaupt und Jochen Kirstätter haben wir zwei Partner an Bord, die sich um den Support und die Weiterentwicklung kümmern werden. Christof Wollenhaupt wird maßgeblich und federführend an der Weiterentwicklung beteiligt sein. Über Christof Wollenhaupt können auch ab sofort Lizenzen gekauft werden, Christof Wollenhaupt ist für den Online-Vertrieb zuständig, der gerade aufgebaut wird. Sollte ein AFP Server aktiviert werden müssen, können sich alle bisherigen Lizenzinhaber auch direkt an Christof Wollenhaupt wenden. In den nächsten Wochen werden wir die AFP wieder auf Touren bringen. Eine aktuelle Version, eine neue Webseite, der Aktivierungsserver, ein Überblick über das leicht geänderte Lizensierungsmodell, und vieles mehr ist gerade in Arbeit. Die Zukunft und die Weiterentwicklung der AFP sind jetzt gesichert! Mit freundlichen Grüßen Ralph-Norman von Loesch Source: http://forum.dfpug.de/bodyframe.afp?msgid=728069

    Read the article

  • Programming Windows 8 Apps with HTML, CSS, and JavaScript - All you need in one title

    It took me a while to work through the 800+ pages of this title. And yes, I really mean working not reading... Since the release of Windows 8 it should be obvious to any Windows software developer that there are new ways to develop, deploy and market applications for a broader audience. Interestingly, Microsoft started to narrow the technological gap between the various platforms - desktop, web, smartphone and XBox - and development of modern apps with HTML, CSS and JavaScript couldn't be easier. Kraig covers all facets of modern Windows 8 apps from the basic building blocks and project templates in Visual Studio 2012 over to the thoughtful use of specific APIs to finally proper deployment in the App Store and potential monetization. The organisation of the book is lied out like step by step instructions or a tutorial. Kraig literally takes the reader by the hand and explains in detail in his examples about the reasons, the pros, and the cons of a certain way of implementation. Thanks to cross-references to other chapters he leaves the choice to the reader to dig deeper right now or to catch up at some time later. Personally, I have to admit that I really enjoyed the relaxed writing style. App development is not dust-dry rocket science and it should be joyful to learn about new technologies. And thanks to the richness of the various chapters and samples you could easily adapt and transfer the knowledge gained in this title to other platforms like Windows Phone 8. And last but not least: The ebook is freely available at Amazon, Microsoft Press and O'Reilly. Don't think about it, just get the book. Now. Update: I already mentioned this title in other blog entries which are related to Microsoft certification. Feel free to read on and to discover more online resources: Learning content for MCSDs: Web Applications and Windows Store Apps using HTML5 More content for MCSDs: Web Applications and Windows Store Apps using HTML5 O'Reilly offers free webcasts on their site, too. And in case that you would like to know more about Kraig's book and his experience with various development teams, please checkout this one: Zero to App in Two Weeks: Programming Windows 8 Apps in HTML, CSS, and JavaScript. The recording should be available soon.

    Read the article

  • Somewhere to get inspiration - Pair up the creative with the tech

    - by Morten Bergfall
    I am a somewhat green developer; some work experience, last year of school. As most of you, I am constantly working on an assortment of personal projects. Since my mind often has a somewhat drifting characteristic; I am not always able to keep the projects in check. After some time they all exhibit the moral fiber of Vikings, harlots and chain-letter-knitters. This includes constant forking, round-abouting, eating of school assignments of rather mundane, and hence pretty yawn-inducing, specifications, and of course quite a bit of gathering of folder dust. Well, on to my question....is there a place, forum... or something with the purpose of linking people with ideas to the people actually being able to bring said ideas to life? Of course, I know of the professional ones, like rent-a-coder and such. And there seem to be a lot of open source projects available for participation. What I'm looking for doesn't really fit into any of those categories....the form would be somewhat like rent-a-coder, but this is ideas&inspiration, not bubble-sort-my-quarterly-for-a-buck. The possibilities for developing bonds, spicy code, and plain old fun seem quite possible.As I see it, the main benefit would be that we (that is the tech-flipside of the proverbial eCoin) get something worthwhile to do, rather than squeeze the last creative grain out of our code-heavy brains.To give it some perspective...: My last project consists of an absurd jQuery-plugin that includes animated png-robots migrating from Google Earth to drag a html-element of your choosing onto the map, where it gets color, for so to be dragged back by this poorly animated robot.... Often, the line between the creative and the tech is blurred, to say the least. I wouldn't think that would be a problem. Think someone who has developed a nifty little windows application, then sees possibility for a broader use, perhaps some sort of networking functionality. This fellow sadly lacks the skill to implememet this. So he, she or it would then seek a developer with the know-how and they could complete this project together. So, do any of you know of such a place, or can nudge in the right direction? And yes, I understand completely that I should be dedicating myself to doing school work, or applying for mundane developer positions, so please.... :-) UPDATE Sadly, I'm situated in Oslo, Norway, and the number of developers are somewhat limited...and I have had quite some ahem personality issues with the ones who are available ;-) So I feel I must go deeper; search the multitude of the web...

    Read the article

  • XNA Notes 001

    - by George Clingerman
    Just a quick recap of things I noticed going on in or around the XNA community this past week. I’m sure there’s a lot I missed (it’s a pretty big community with lots of different parts to it) but these where the things I caught that I thought were pretty cool. The XNA Team Michael Klucher gave a list of books every gamer should read. http://twitter.com/#!/mklucher/status/22313041135673344 Shawn Hargreaves posted Nelxon Studio posting about a cheatsheet for converting 3.1 to 4.0 http://blogs.msdn.com/b/shawnhar/archive/2011/01/04/xna-3-1-to-4-0-cheat-sheet.aspx?utm_source=twitterfeed&utm_medium=twitter XNA Game Studio won the Frontline award for Programming Tool by GameDev magazine! Congrats to the XNA team! http://www.gdmag.com/homepage.htm XNA MVPs In January several MVPs were up for re-election, Jim Perry, Andy ‘The ZMan’ Dunn, Glenn Wilson and myself were all re-award a Microsoft MVP award for their contributions to the XNA/DirectX communities. https://mvp.support.microsoft.com/communities/mvp.aspx?product=1&competency=XNA%2fDirectX A movement to get Michael McLaughlin an MVP award has started and you can join in too! http://twitter.com/#!/theBigDaddio/status/22744458621620224 http://www.xnadevelopment.com/MVP/MichaelMcLaughlinMVP.txt Don’t forget you can nominate ANYONE for a MVP award, that’s how they work. https://mvp.support.microsoft.com/gp/mvpbecoming  XNA Developers James Silva of Ska Studios hit 9,200 sales of ZP2KX and recommends you listen to Infected Mushroom. http://twitter.com/#!/Jamezila/status/22538865357094912 http://en.wikipedia.org/wiki/Infected_Mushroom Noogy creator of the upcoming XBLA title Dust an Elysian tail posts some details into his art creation. http://noogy.com/image/statue/statue.html Xbox LIVE Indie Game News Microsoft posts acknowledging there was an issue with the sales data that has been addressed and apologized for not posting about it sooner. http://forums.create.msdn.com/forums/p/71347/436154.aspx#436154 Winter Uprising sales still chugging along and being updated by Xalterax (by those developers willing to actually share sales numbers. Thanks for sharing guys, much appreciated!) http://forums.create.msdn.com/forums/t/70147.aspx Don’t forget about Dream Build Play coming up in February! http://www.dreambuildplay.com/Main/Home.aspx The Best Xbox LIVE Indie Games December Edition comes out on NeoGaf http://www.neogaf.com/forum/showthread.php?t=414485 The Greatest XBox LIVE Indie Games of 2010 on DealSpwn – Congrats to DrMistry and MStarGames for his #1 spot with his massive XBLIG Space Pirates From Tomorrow! http://www.dealspwn.com/xbligoty-2010/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+Dealspwn+%28Dealspwn%29 XNA Game Development The future of XACT and WP7 has finally been confirmed and we finally know what our options are for looping audio seamlessly on WP7. http://forums.create.msdn.com/forums/p/61826/436639.aspx#436639  Super Mario 3 Design Notes is an interesting read for XBLIG developers, giving some insight to the training that natural occurs for players as they start playing the game. Good things for XBLIG developers to think about. http://www.significant-bits.com/super-mario-bros-3-level-design-lessons

    Read the article

  • 5 ways to stop code thrashing&hellip;

    - by MarkPearl
    A few days ago I was programming on a personal project and hit a roadblock. I was applying the MVVM pattern and for some reason my view model was not updating the view when the state changed??? I had applied this pattern many times before and had never had this problem. It just didn’t make sense. So what did I do… I did what anyone would have done in my situation and looked to pass the blame to someone or something else. I tried to blame one of the inherited base classes, but it looked fine, then to Visual Studio, but it seemed to be fine and eventually to any random segment of code I came across. My elementary problem had now mushroomed into one that had lost any logical basis and I was in thrashing mode! So what to do when you begin to thrash? 1) Do a general code cleanup – Now there is a difference between cleaning code and changing code . When you thrash you change code and you want to avoid this. What you really want to do is things like rename variables to have better meaning and go over your comments. 2) Do a proof of concept – if cleaning code doesn’t help. The  you want to isolate the problem and identify the key concepts. When you isolate code you ideally want it to be in a totally separate project with as little complexity as possible. Make the building blocks and try and replicate the functionality that you are getting in your current application. 3) Phone a friend – I have found speaking to someone else about the problem generally helps me solve any thrashing issues I am having. Usually they don’t even have to say anything to solve the problem, just you talking them through the problem helps you get clarity of mind. 4) Let the dust settle – Sometimes time is the best solution. I have had a few problems that no matter who I discussed them with and no matter how much code cleaning I had done I just couldn’t seem to fix it. My brain just seemed to be going in circles. A good nights rest has always helped and often just the break away from the problem has helped me find a solution. 5) Stack overflow it – So similar to phone a friend. I am really surprised to see what a melting pot stack overflow has been and what a help it has been in solving technology specific problems. Just be considerate to those using the site and explain clearly exactly what problem you are having and the technologies you are using or else you will probably not get any useful help…

    Read the article

  • System freezes while not in use, how do I fix this?

    - by PHLAK
    Bare with me, the following is a bit winded. I have Ubuntu 10.10 Desktop 64-bit installed on my laptop and up until a few weeks ago it has been running great. Then one day, while I was not using the laptop it froze. I was logged in as my user but had locked the screen locked and closed the lid. I didn't notice that it had frozen until I opened the lid and wiggled the mouse to try and log in. The screen remained black and I got no response. I immediately tried Alt + F2, F3, F4, etc. but got no response. The only thing I could do was hold the power button to power off the machine. The freezing has happened as quickly as within 10-20 minutes of the system being logged off and lid closed and as long as 4-6 hours. My machine is NOT configured to go into standby when plugged in and this has happened both on AC power and battery. Troubleshooting I have performed: I uninstalled programs I knew that I had installed between when it was working fine and having problems. Those programs were CrashPlan, Shutter and Conky. After uninstalling ALL of these programs the freezing still occurs. Next, I decided to SSH into the machine from my desktop and leave an htop and tail of the syslog running. Here are screenshots of the last thing shown on both when the system froze: htop, syslog Here is a dump of my syslog after another freeze. The freeze happened at 9:14 and I didn't notice it until about 10 minutes later and rebooted, hence the 10 minute gap from 9:14 to 9:24. In the above syslog dump I noticed a lot of NVRM: os_raise_smp_barrier(), invalid context! and upon investigating that message learned it was from the proprietary Nvidia driver I had installed. Thinking this could be part of the problem I uninstalled the Nvidia driver and reverted to using the Nouveau driver. The computer still froze after a few hours. Lastly, thinking the problem could be caused by overheating I used compressed air to blow out any dust in the CPU vents and all other openings on the laptop. None of the above troubleshooting has helped and the freezing still occurs. What other steps can I take to troubleshoot and/or fix this problem? Note: Yesterday X started to eat up a lot of CPU power and eventually froze my system while I was forwarding an X session over SSH (from another PC to my laptop). I'm unsure if this is related or not as it doesn't match any of the symptoms of the problem above. Aside from this, the system has never frozen while in use, even under heavy load. EDIT: I just ran Memtest86+ and it made it through two passes without any errors. Just eliminating possible causes here.

    Read the article

  • Moms on Mobile: Are They Way Ahead of You?

    - by Mike Stiles
    You may have no idea how much and how fast moms are embracing mobile. Of all the demographics that can be targeted by marketers, moms have always been at or near the top of the list. And why not? They’re running households, they’re all over town, they’re making buying decisions, and they’re influencing family and friends. They, out of necessity, become masters of efficiency and time management. So when a technology tool, like mobile, comes along that assists with that efficiency and time management, we would obviously expect them to take advantage of it. So if it’s obvious, why are so many big, sophisticated brands left choking on the dust of moms who have zoomed past them in the adoption of mobile, and social on mobile? Let’s break down some hard truths as presented by a Mojiava report: -Moms spend 6.1 hours per day on average on their smartphones – more than magazines, TV or radio. -46% took action after seeing a mobile ad. -51% self-identify as “addicted” to their smartphone. -Households with an income of $25K-$50K have about the same mobile penetration among moms as those with incomes of $50K-$75K. So mobile is regarded as a necessity for middle-class moms. -Even moms without smartphones spend 2.5 hours on average per day on some connected mobile device. -Of moms with such devices, 9.8% have an iPad, 9.5% a Kindle and 5.7% an iPod Touch. -Of tablet-owning moms, 97% bought something using their tablet in the last month. -31% spend over 10 hours per week on their tablet, but less than 2 hours per week on their PCs. -62% of connected moms use shopping apps. -46% want to get info on their mobile while in a store. -Half of connected moms use social on their mobile. And they’re engaged. 81% are brand fans, 86% post updates, and 84% comment. If women and moms are one of your primary targets and you find yourself with no strong social channels where content is driving engagement and relationship-building, with sites not optimized for mobile, or with no tablet or smartphone apps, you have been solidly left behind by your customers and prospects. And their adoption of mobile and social on mobile is only exponentially speeding up, not slowing down. How much sense does it make when your customer is ready to act on your mobile ad, wants to user your iPad app to buy something from you, wants to be your fan on Facebook, wants to get messages and deals from you while they’re in your store…but you’re completely absent? I’ll help you cheat on the test by giving you the answer…no sense at all. Catch up to momma.

    Read the article

  • ADSIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

    - by ThaKidd
    Hello all. I would value some input from a few Exchange 2010 experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ADSIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

    Read the article

  • ASDIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

    - by ThaKidd
    Hello all. I would value some input from a few experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ASDIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

    Read the article

  • Intel Core i7 QuadCore on HP Pavilion dv7 Overheating Issues

    - by kellax
    I bought a brand new HP notebook: HP Pavilion dv7-6b21em BeatsAudio edition. The notebook is about 2 months old and has pretty nasty overheating problem. I mainly use it for development however i do play some games. The disturbing thing is that the computer is loud on pretty simple tasks. Here are the specs: CPU: Intel Core i7-2670QM QuadCore ( 8 threads ) @ 2.20 GHz RAM: ( 8GB ) 2x 4GB @ 1066 HDD: 1TB 7200 GPU: ATI Radeon HD 6770M 1GB Dedicated DDR OS: Windows 7 64bit Enterprise I have an external monitor runing on VGA port an 22' Samsung SyncMaster S24B300 CPU Heat Statistics Platform: rPGA 988B (Socket G2) Frequency: cca. 3000 Mhz VID: 1.1809 - 1.2059 v Revision: D2 CPUID: 0x206A7 TDP: 45.0 Wats, Lithographu: 32 nm Heat: Tj. Max: 100*C, Power 4.5 - 5.9 Wats Core #0: 63*C Load on all is about 0 to 2% Core #1: 65*C Core #2: 66*C Core #3: 67*C I opened the notebook the fan is working fine there is no dust but still right now the fan is pretty loud even tho all i have open is FireFox. When i run a game the heat jumps to whopping 90-97*C. It has not shut down due to overheating yet but the loud fan is pretty annoying considering I'm not really doing anything stressfull. Is there anything i can do to fix this is it maybe a BIOS issue ? I have all drivers updated tho to the latest. I have very few background processes running consuming bare 2GB of RAM and about 2% of CPU. I had it serviced they said there is nothing wrong with it. But i feel that a Notebook that costs 1.2k Euros cant be like this.

    Read the article

  • My hard drive seems to be overheating... what should I do?

    - by George Edison
    After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

    Read the article

  • Laptops with easy heat sink service?

    - by Niten
    Can you recommend a current laptop model with easy heat sink access – or better yet, a removable air intake filter – making it easy to periodically clean out the dust and lint that always packs up in these things? Every laptop I've owned has eventually overheated on account of a clogged heat sink. (I suppose it doesn't help that I have a cat who loves to hang out where I'm working, or that my laptop is almost always running.) One of the things I really love about my current system, a Dell Inspiron 1420n, is how easy it is to service its cooling system: whenever I notice the fan starting to work harder and the CPU temperature climbing higher than it should be, I merely have to unscrew a single panel from the bottom of the machine, clean out the heat sink, and then I'm good for another few months. Which current models of the "business laptop" variety offer similar easy cooling system service? I'm looking for something roughly along the lines of: 14- or 15-inch display Nehalem-based CPU Solid construction – magnesium chassis or better (like the Inspiron) TPM (for BitLocker) ideal, but not mandatory Docking adapter ideal, but not mandatory Good battery life For example, the ThinkPad T410 would have been my top choice, but it seems like it would be a serious chore to service its heat sink. For the current MacBook Pros it looks downright impossible. No matter how nice the laptop is in other respects, it'll be of no use to me when it's overheating. So, any suggestions? Thanks in advance... (I'm constantly surprised that customers and manufacturers don't pay more attention to this feature, at least in the business laptop subcategory. In the last couple months I've fixed two friends' laptops which were also overheating due to clogged cooling systems; clearly I'm not the only one affected by this.)

    Read the article

  • I keep losing wireless connection

    - by posfan12
    I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

    Read the article

  • Dell Inspiron 1564 overheating but fan not switching on, how to diagnose?

    - by Smugrik
    I've got a Dell Inspiron 1564 laptop that is about one and a half years old. Since about a week, the laptop started to overheat, causing it to switch off unexpectedly... The cpu fan is working erratically, it can start to spin for a while, doing its job and cooling down the cpu before it stops, but then the temperature goes up, and the fan doesn't reacts, once the temperature reaches a critical point (over 85 celsius, checked with speedfan...), the laptop switches off... I already cleaned the vents and fan from dust, to no avail, and it was actually quite clean anyway. Drivers and bios are up-to-date, no crapware was ever installed on this machine. I don't know how to diagnose the problem, could it be the temperature sensors that sends wrong information, so the fan doesn't reacts? but then I believe the computer wouldn't detect the overheat and stop... Is there a way I can pin point the problem? Maybe some low-level diagnostic tools to check functionality of sensors and fans??? The warranty is already over so any suggestion would be welcome. Thanks!!

    Read the article

  • Chipset fan on the frtiz - compressed air hasn't fixed anything - is there anything I can do?

    - by Anthony
    Yesterday, my computer started to make an annoying whining noise. Knowing that this is likely a fan issue, I opened the case and proceeded to determine which fan was causing the issue. I got some compressed air and tried cleaning out the dust around it (and the rest of the computer while I was at it). This hasn't seemed to fix the issue. Now, if it were just any fan, I would probably just replace the fan - they're relatively cheap after all. However, this is a special fan. Aside: For what its worth, I feel bad that the graphics card blocks part of the fan, but it is the only slot the graphics card fits, so I had no choice. After pulling out my motherboard user guide, it looks like this is a fan placed directly on top of the chipset. To be perfectly honest, I have no clue what the purpose of the chipset is - but it sounds important. After some quick research, I see that it is responsible for providing the bridge between my CPU, RAM and graphics, among other things. Just a quick search at Newegg tells me that chipset fans can be purchased at pretty reasonable prices (< 20 dollars). Is it practical to replace this fan? It is an old computer as computers go and I wouldn't be terribly upset to upgrade the motherboard and processor, so perhaps this is a sign. Hardware Specs: Motherboard: Asus A8N-E Chipset: NVIDIA nForce4 Ultra

    Read the article

  • Computer restarts without warning; code bcc116

    - by Robert C.
    Processor: Intel i5 4430 4-Core 4x3Ghz Motherboard: msi h87-g41 Graphics Card: Nvidia GTX760 Power supply: eps-750 cm RAM: 8GB I bought a new assembled gaming PC which worked fine for a few days. Then it started rebooting without warning. After it restarts windows 7 gives me an bbc 116 error code. Apparently it's something to do with my video card, either it overheating or wrong drivers. I've installed the latest driver from Nvidia for my graphics card. Since it's brand new it can't be dust, I'm running it with its lid open to see if the problem persists. I'm also running prime95 now to see if it tells me anything else. Using core temp it tells me that my CPU reaches up to 95° celsius with the blend stress test from prime95. Aaaand it just peaked to 100°. Of course it doesn't reach these temperatures at all while idle/gaming. I'm gonna let prime95 run for a night and to see what happens. Until then does anyone know what I should do next?

    Read the article

  • Need to Remove Exchange 2003 Server That Crashed During Transition to 2010

    - by ThaKidd
    As the title stated, we were running an Exchange 2003 server that we knew was going down soon so we purchased a second server and installed Exchange 2010 into the AD. We managed to move all of the mailboxes off of 2003 and also managed to get the Offline Address Book setup on 2010. At this point the 2003 server bit the dust and will no longer boot. Therefore we were unable to properly uninstall Exchange and remove the last 2003 server so it still exists in AD. As far as the clients are concerned, everything is working properly. However, when I run the Microsoft Exchange Profile Analyzer, I still see the old server and its Administrative Group. I am going to guess that since the old server is showing up in AD, I will not be able to raise Exchange or AD functionality (as the 2003 server was also the only AD DC) levels. I have forced the 2003 DC out of AD so that is no longer an issue. Old Setup: Windows 2003 Server Enterprise & Exchange 2003 Standard New Setup: Windows 2010 Server Enterprise & Exchange 2010 Standard Two Questions: How do you go about manually forcing the 2003 server and its administrative group out of AD? When that is finished, where do you raise the Exchange mode (can't find this for the life of me)?

    Read the article

  • Overheating Toshiba Satellite L300

    - by ldigas
    A coleague of mine's having trouble with his new Toshiba Satellite L300 ... I tool a kook at it, and indeed it's hot as hell. I couldn't hold my hand on it for too long. He says it also has a tendency to turn itself off (WinXP 32bit running) with no forewarning. Hasn't happened to me while I was using it, but that wasn't long anyways. The first guess was it was too dirty ... problem is it's new, came out of a package a quarter of a year ago. Kept in a clean environment (office). Looks clean. No dust in sight. Second guess is that the fan wasn't working properly, cause indeed it has intervals of working, and non working. But when I listen to it, it sounds like normal usage. I took a SpeedFan measurement, and it reports temp. up to 85 Celsius ... which is definitely too high. Anyone knows what else I could do to it ? It is under warranty and it will go to the service, but I thought if there is something we can do, as to avoid carrying it there / be without it for a week ...

    Read the article

  • Is there any free software to check for issues with a DVD drive?

    - by AgentConundrum
    I don't usually play movies on my laptop (prefer the standalone with the tv), but I tried to watch one the other night, and noticed playback was really choppy and had audio artifacts in places. I thought it could be related to memory issues so I rebooted and tried again, but the results were the same. I considered that it could be an issue with the disc, so I tried to clean it but again there was no change. I don't think the problem is with the disc, because I tried another disc and it also had the same problem. I don't think I've ever watched the second disc since I've had it, so it should have been safe in its jewel case. Also, there were no issues when I watched an episode off the first disc in my standalone player. What I'm wondering is: are there are any (free) utilities that can check for issues with the drive itself? I looked around but most of the software I found focuses on integrity checks for the disc, not the drive. I have had issues with this laptop recently (had to replace the keyboard when the cat damaged it while I was cleaning dust out and the machine was ripped apart, also replaced part of the chassis after I cracked it when I tried to open it not knowing a screw was still in it) so I may have just replaced the drive incorrectly. I'm going to check on this while I await an answer to this question. Thanks.

    Read the article

  • PC freezes after repeated clicking noises

    - by Péter Török
    I have an oldish PC (Athlon XP 2200, WinXP). Every time I switch it on, I hear a loud "click" first of all, and when it is shut down, again a click is the last sound I hear. Lately it started to behave erratically: it started to click loudly in the middle of a session. First only once in a while, then repeatedly for several seconds in a row, and finally it froze completely. We were not doing anything particular during these times, usually just browsing the web. This has already happened twice in a few week's time period. We typically use it only in the evenings, so when the freeze happened, I just decided it is time for the bed. When it was started up the next day, everything looked fine. Any hints on what could be the culprit? Could it be caused by an ageing heat fan, or dust that has accumulated inside the case? We are backing up all the data stored on it, and then will open the case to look inside, but I thought it would be good to get some background info first of all.

    Read the article

  • What can I do to prevent system power downs?

    - by Joe King
    Yesterday I was given my brother's old laptop - core i7, 2.67GHz, 8GB RAM, 128GB SSD, Win7 64 bit. It's a Sony Vaio Z11. Approx 18 months old. When running something computationally intensive, the fan starts up and after about 30 secs it just powers itself down with no warning. I guess it is overheating. There is nothing in the event logs to suggest what is causing it - the only thing I see is "the last system shutdown was unexpected" or something similar. This is a problem for me because I use a lot of number crunching apps, which pretty much makes it useless to me. I would like to know if there is anything I can do, other than the obvious things I've done already - open up and clean out dust, re-install the OS. According to my brother, this problem started about 6 months ago when it was already outside warranty. If it's just used for simple things - web browsing, word processing etc, the problem does not occur. Any ideas for what I can do to fix this ? Update: I found that the laptop has 2 hardware settings for graphics: Speed and Stamina - the Speed setting seems to use an nvidia GEforce GT 330M, while the Stamina setting uses an Intel chipset. With the setting on Speed, I can hear the fan the whole time, and the system powers down after a short while (5-10 mins) even just doing basic tasks (browsing this site for example), but doesn't shut down if I just leave it switched on. In this mode it also sometimes just freezes the screen and I have to power off myself. However on Stamina setting it only powers down when doing number crunching and never freezes the screen.

    Read the article

  • Samsung laptop randomly shuts down

    - by Dmatig
    I've rewritten this question because it turned into an indecipherable mess. I have a Samsung R560 laptop that is overheating, and shutting itself down under load consistantly. Thank you quickcel for reccomending me Speedfan to monitor my temps. Here they are (Load / Idle): (Ignore "Temp1 and Temp2", whatever sensors they are they'd always random, pretty sure they're broke). The load temperature is after just 5 minites of playing Fallout 3 - another 5 minutes and it (the GPU - 9600M GS) consistantly breaches the mid 90's then shuts down, so it's hard to get a good picture of it. I'm looking for some solution or way to decrease these temperatures, because they seem far too high even idle. I've tried: Opening up the case and clearing of all dust with compressed air. Updating drivers for my Graphics card Have purchased and am using a notebook cooler I don't want to: Undervolt / underclock (defeats the point of having a more expensive card) Use lower power / performance settings (again, i might as well have bought something cheaper) Is there anything else i can try (software or inexpensive hardware) that can help me fix this? Has anybody had a Samsung laptop and knows if this can be sorted under my warranty, and the turnaround time of sending it off (UK?)(it has always ran hotter than it should, but now at 6 months old is getting hot enough to power off)

    Read the article

  • Using my old PC as a web/file server?

    - by Garrett
    I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

    Read the article

  • Motherboard running rather hot while gaming

    - by I take Drukqs
    Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

    Read the article

< Previous Page | 3 4 5 6 7 8 9  | Next Page >