Search Results

Search found 4405 results on 177 pages for 'gpt protective partition'.

Page 7/177 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Deleted Partition Recovery

  - by ankur.trapasiya

  Recently i was installing ubuntu 12.04 on my system. There were 4 partitions on my system and i selected one of the four partition for the installation and chose the option of re sizing the partition. Initially my partition was of size 100+GB and i created another partition out of it of size 15GB (EXT4). Now the moment i changed this partition structure my original partition got lost along with its data and i am left with 50GB partition and 50GB unallocated free space. Now the data that i have lost is meant a lot to me and i want to recover that data. So is there any way i can recover it ? And i haven't checked "format" option while resizing the partition. Thanks in advance.

  Read the article

• Cloned partition not seen correctly by disk utility & gparted

  - by enrico

  Some days ago I cloned my /dev/sda1 partition with clonezilla in partition-to-partition mode to /dev/sda3. It worked, but now that I've finished the setup of system in /dev/sda3, I wanna reinstall /dev/sda1 for other stuffs. This partition is NOT mounted, but ubuntu's DISK UTILITY thinks it is, while it doesn't see as mounted the currently active / partition /dev/sda3. This is the df- TH output : Filesystem Type Size Used Avail Use% Mounted on /dev/sda3 ext4 32G 6.2G 24G 21% / udev devtmpfs 2.2G 13k 2.2G 1% /dev tmpfs tmpfs 845M 906k 844M 1% /run none tmpfs 5.3M 0 5.3M 0% /run/lock none tmpfs 2.2G 115k 2.2G 1% /run/shm /dev/sdb1 fuseblk 321G 147G 174G 46% /Dati Gparted instead, sees /dev/sda1 as NOT mounted (checked with Information option), but it display the BOOT flag on this partition, while the real booted partition /dev/sda3, hasn't it. If I try to format the /dev/sda1 partition, it gives me this error : GParted 0.8.1 --enable-libparted-dmraid Libparted 2.3 Format /dev/sda1 as ext2 00:00:02 ( ERROR ) calibrate /dev/sda1 00:00:00 ( SUCCESS ) path: /dev/sda1 start: 2048 end: 62500863 size: 62498816 (29.80 GiB) set partition type on /dev/sda1 00:00:02 ( SUCCESS ) new partition type: ext2 create new ext2 file system 00:00:00 ( ERROR ) mkfs.ext2 -L "" /dev/sda1 mke2fs 1.41.14 (22-Dec-2010) /dev/sda1 is mounted; will not make a filesystem here! How is possible to correct this behaviour ? Is this due to some lacking option in clonezilla phase ? TIA Enrico

  Read the article

• Resize Partition with gparted

  - by arian

  I wanted to create more space for Ubuntu on my hard disk in favor of my windows partition. I booted the livecd and resized the ntfs partition to 100gb. Then I wanted to resize my ubuntu (ext4) partition to fill up the created unallocated space. A screenshot of my current disk. (With the livecd there's no 'key' icon after sda6) My first thought was just right click on sda6 ? move/resize ? done. Unfortunately I cannot resize or move the partition. However I can resize the ntfs partition. I guess it is because the extended sda4 partition is locked. I couldn't see an unlock possibility though… So how do I resize the ext4 partition anyway, probably by unlocking the extended partition, but how? Thanks in advance.

  Read the article

• How to set up an inter-OS partition?

  - by Confuzzled Persun

  I need a working partition configuration for use and accessibility on both Ubuntu and Windows. I have an 8GB USB flash drive onto which I am installing Ubuntu 11.10 so that I can have a personal bootable OS wherever I go. I've installed Ubuntu several times, but I just can't seem to get this one partition right. This is my own configuration: Partition 1: Primary - 200MB - Beginning - Ext4 - /boot Partition 2: Primary - 1300MB - End - swap area Partition 3: Logical - 5200MB - Beginning - Ext4 - / Partition 4: Logical - 1258MB - Beginning - Ext4 - /home Partition 5: Logical - 42MB - End - FAT32? - /windows? What I want to do is to get partition 5 configured so I can access it on both the installed Ubuntu system and a Windows system (when the USB drive is connected while Windows is booted). Basically, what I want is Ubuntu installed on the USB drive along with a partition that I can access with other operating systems. I'm thinking I just need the technical configuration of "Use as:" and "Mount point:" for my final partition. But I don't know. Any help with this is appreciated. And any other tips are appreciated as well.

  Read the article

• The partition table is corrupt

  - by Tim

  I have a corrupt the partition table on the laptop that is running Ubunutu 10.4. Before the partition table was corrupt I had the following partitions: 2 primary partitions: 1st - NTFS 2nd - Extended 4 logical partitons that are built within 2nd extended: 1st NTFS (68 Gib) 2nd Linux (19 Gib) 3rd Swap (1.4 Gib) 4th Linux (24 Gib) The physical order of these partitions was the following: ( 4th Linux ) - ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) The logical order of the partition was different: ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) ( 4th Linux ) NTFS partition was big and it resided between 2 Linux partitions, neither of these partitions had enough space to install Oracle 11g. Therefore, I decided to a) either move the NTFS partion to the left or b) remove it completely and extend partition where Linux resides. As I tool I have chosen GParted. But unfortunately it was not able to move the partition because he found that in NTFS partition there are some blocks that are referenced multiple times. Also it was not able to remove the partition neither, because in this case the partitions that follow it ( 2nd Linux ) - ( 3rd Swap ) have to be in his opinion also removed, because the organization of extended partition is a linked list. Since GParted was not able to do such thing I was trying to find another tool. I found diskdrake tool on PSLinuxOS distribution of linux. That tool silently deleted ( 1st NTFS ) partition and I thought that everything was fine. But diskdrake has damaged the partition in a way that I am not able either to boot from the hard disk nor to see the partitions with GParted and even with diskdrake itself! Fortunately I have a live CD of Ubuntu 8.10 and I am able to boot and see hard disk. I have 2 ideas how I can solve the problem: 1) Manually change disk partitions and point them to the correct partitions. 2) Create partition table with GParted that as much as possible is the same with the previous one I find the 2nd approach less time consuming but some data will be lost because of it is not possible to place borders of the partitions exactly how it was before. And moreover I am not sure if such approach would work, for example, if the OS is able to locate files after repartitioning. I feel like that it will but not 100% sure. Are there some ideas how the problem may be solved?

  Read the article

• Step by step guide to partition an external HDD in two file formats

  - by Mysterio

  I just purchased an external HDD (1TB) which I want to partition with two different file formats - NTFS and FAT32 (this partition is for my PS3 backups). At the moment it's a giant 943mb NTFS partition and at the end of the operation I want it to be like: 643 MB NTFS partition (as my main partition) 300 MB FAT32 partition (to house my PS3 backups) Please can someone help me out? Thanks in advance.

  Read the article

• "Misaligned partition" - Should I do repartition (how?)

  - by RndmUbuntuAmateur

  Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

  Read the article

• How can I set my bootloader to load my primary (C:) partition?

  - by acidzombie24

  I created 4 partitions and want to use them to have seperate Windows XP, Windows 7, (possibly) Windows Vista installations, and "WinDummy" (to test applications in Vista, XP or another OS). I used Norton Ghost to install an OS to the drive in about 3 minutes. My problem is that I installed the spare first on the 4th partition, then Windows 7 on the second. I tried to set the bootloader (with easybcd) to use the first partition - but it doesn't want to. Heres my debug screen on easybcd As you can see, the device is set to H and i cant figure out how to change it. I can make my bootloader use Windows 7 first, but I can't make it use my C: install of XP instead of my spare H:. How would I fix this? Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=H: description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} default {bc2d8409-8640-11de-aa7e-a477d86453c4} resumeobject {bc2d8405-8640-11de-aa7e-a477d86453c4} displayorder {bc2d8409-8640-11de-aa7e-a477d86453c4} {bc2d8406-8640-11de-aa7e-a477d86453c4} {bc2d8404-8640-11de-aa7e-a477d86453c4} {466f5a88-0af2-4f76-9038-095b170dc21c} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 3 Real-mode Boot Sector --------------------- identifier {bc2d8409-8640-11de-aa7e-a477d86453c4} device partition=C: path \NTLDR description Windows XP Windows Boot Loader ------------------- identifier {bc2d8406-8640-11de-aa7e-a477d86453c4} device partition=D: path \Windows\system32\winload.exe description Windows 7 locale en-US inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {bc2d8407-8640-11de-aa7e-a477d86453c4} recoveryenabled Yes osdevice partition=D: systemroot \Windows resumeobject {bc2d8405-8640-11de-aa7e-a477d86453c4} nx OptIn Windows Boot Loader ------------------- identifier {bc2d8404-8640-11de-aa7e-a477d86453c4} device partition=E: path \Windows\system32\winload.exe description Blank osdevice partition=E: systemroot \Windows Windows Legacy OS Loader ------------------------ identifier {466f5a88-0af2-4f76-9038-095b170dc21c} device partition=H: path \ntldr description Windows XP Spare

  Read the article

• Move smaller hard drive to partition on a larger hard drive

  - by bluejeansummer

  My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu. I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot. Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority. In case it helps, both drives use 2.5" PATA, and I have a 1 TB external drive available if it's needed.

  Read the article

• How should i setup my PC partition?

  - by acidzombie24

  I want to clear out my PC and setup the partitions. Right now i have it as XP, Win-7, Vista, XP/Test/Spare I notice my PC is pretty good at virtualization, at least virtualizing linux. I also rarely boot out of my primary XP although i do find myself deving on windows 7 once in a while. So i figure i can have it as XP, Windows 7, data partition then... what? i still have one more slot. There may be a more useful way to do this so what do you guys think? My bro has 2gb partition that is used to restore the OS which can be ran during the bootup process. However i dont think i can do that with mine. So, what are you thoughts?

  Read the article

• Create new partition on live production CentOS server

  - by Kimmel

  I have a production server that is running on CentOS. I'd like to create a partition on the server without having to reinstall everything. I have CLI and VNC access to the remote server. Is there anyway that I can create a partition safely? Here's my output from fdisk -l Disk /dev/sda: 85.9 GB, 85899345920 bytes 255 heads, 63 sectors/track, 10443 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00033d5e Device Boot Start End Blocks Id System /dev/sda1 * 1 10444 83885056 83 Linux Thanks.

  Read the article

• Why does partition tool GParted read the 190GB of data twice when shrink a 250GB partition to 190GB?

  - by Jian Lin

  When using GParted to shrink a 250GB partition to 190GB, I thought it will move the 60GB of data back into the 190GB region and call it done. But instead it reads the 190GB of data twice, the first time taking about 1 hour and the second time for 2 hours. The question is: 1) how come it touches the 190GB of data instead of the 60GB of data? 2) how come it reads it twice? Update: i am suspecting this: it says "moving /dev/sdb1 to the right and then shrink it to 190GB"... so is that the reason, first it is to shrink the partition to 190GB, and then move it to the right? So it is not moving to the right and then shrink it, but to shrink it first and move it. (cannot move first because the original 250GB is the whole hard drive). Also, why move it to the right?

  Read the article

• HFS partition resize utility for Windows

  - by SamSol

  Is there any utility to resize HFS partition for Windows?

  Read the article

• Resize a TrueCrypt Partition ?

  - by Annan

  How is it possible to resize a partition encrypted with TrueCrypt without corrupting the data ?

  Read the article

• How can I move my partition in GParted?

  - by reprogrammer

  The following is a screenshot of GParted run on my system. There is a small unallocated space at the beginning of the list. This 1 MiB space is kind of annoying and I'd like to merge with any other partition except /dev/sda1, /dev/sda6 and /dev/sda4. When I right click on the unallocated partition, the only available operation is "New". And, if I click on "New", I get the following error message. It is not possible to create more than 4 primary partitions Any ideas of how to go about merging the small unallocated space with other partitions?

  Read the article

• aligning truecrypt partition on 1.5TB 4kB sector drive

  - by pQd

  hi, aligning partitions to start at real physical sector of ssds / stripped raids / 4kB drives is a 'good thing to do'. but i've run into a problems when trying to do it for a truecrypt partition that will contain ext3 on it. or so it seems. when drive is question is partitioned properly and formatted with ext3 i get very reasonable write speeds around 70-80MB/s, but when i put truecrypt and ext3 on the top of it write performance becomes very unstable and goes between 1-25MB/s with very high io-wait. on the same server i dont have any performance issues with ext3 on the top of truecrypt on regular 512B-sector 500GB sata disks. so my best guess is that iowaits are caused by misalignment but i cannot really find reliable information on how to calculate optimal partition beginning. i've tried to start it at 128 logical sector, i've also tried 8132 sector as suggested here but both gave me very bad and unstable performance. do you have any experience with similar setup? thanks!

  Read the article

• GParted tells me my partition has 1.30 GiB used space but I cannot access its contents

  - by reprogrammer

  I've a ext4 partition (/dev/sda7) for my Linux. And, another (/dev/sda5) for keeping my data. When I installing Ubuntu 10.04 LTS, I set the mount point of /dev/sda5 to "/" and that of /dev/sda5 to "/data". GParted tells me that 1.30 GiB out of 70.12 GiB of /dev/sda5 has been used up. But, the mounted directory "/data" is empty. So, it looks like that my data is there but I cannot access it. Besides, when I set the mount point, I didn't check the "format" box. So, it shouldn't have been formatted. How can I check whether the partition has been formatted? How can I recover my files?

  Read the article

• fdisk -l only displays boot partition

  - by Franklin

  I have a SAN, and it's able to read and write to the 50TB RAID just fine, but when I run fdisk -l it only lists the boot partition of the SAN server, and doesn't display anything about the other partitions on the RAID. I've also tried using parted -l with the same result. Now when I type mount it shows that the partitions are mounted just fine. I've never seen this happen. The box is running Openfiler 2.3 (I know it's old, we're in the process of upgrading all our old equipment). We have another SAN that's configured almost identically, and it's able to display the partition info with either of the two commands I mentioned above.

  Read the article

• Can I split one RAID1 partition in two?

  - by Prosys

  I have a linux box with CentOS 6.2 and a RAID1 (2x 2Tb) configuration: /dev/md1 -> / (10G) /dev/md2 -> /home (1.9T) I want to split the md2 in two different partitions, so I can get the following configuration: /dev/md1 -> / (10G) /dev/md2 -> /home (1T) /dev/md3 -> /example (900G) How can I achieve this? I already know that I can resize the partition, but that doesn't alter the real partition table (only the md device), so how can I do this?

  Read the article

• Booting from a different partition.

  - by Legolas

  I have a question. I run Windows7 on C:\ drive and it is the only operating system. I want to install Windows8 developer installation (iso image), and I have it saved in a new partition I created, which has only this.G:\ I want to boot from this partition G:\ so that I can install Windows 8, but in my boot options I get only Internal Hard Disk, CD ROM, and USB Drive. I don't have a USB drive. How can I boot from G:\ with that iso image ?

  Read the article

• Permissions issue on Fedora with separate home partition

  - by Tres

  I am running Fedora 12 and I've setup a partition separate from my root partition to keep shared files and home directories. Now, I've been having permission issues where it says the user cannot chdir into their home directory (/files/home/*). Now, I fixed this originally by chmodding / to 0755 and the home directories also to 0755. And yes, the user is the owner:group of their home directory. Now get this, I didn't change a thing, rebooted, everything still works. Great, right? I boot the server up a day later, and now same ol issue. This is a home server that wasn't on at all at any point in between the working state and non-working state. Also, nothing else was modified. Any ideas? Thanks!

  Read the article

• "Undeleting" partition (NTFS) - recommendations?

  - by kagali-san

  So I have a drive which either suffered from hardware error or, possibly, got a little shock from badly configured Windows unattended install started on the same PC (the drive in question wasn't the install drive..). Quick exam shows that filesystem is seemingly intact, as some data recovery tools work with it (UnFormat rated it as "Excellent"). This may mean that a copy of partition table exists on disk, or a copy of MFT survived whatever happened, or.. Any idea how to restore partition tables/FS header, add a drive letter thus let Windows to mount the filesystem as if nothing happened? (I guess there must be tools of this kind)

  Read the article

• Ubuntu: Resize the root LVM(2?) partition

  - by user12259

  I have an Ubuntu virtual machine running in VirtualBox 2.2.4, and I created it on an 8gb virtual disk which is too small. So, I am trying to increase the size of the disk. So far, I have done this: Created a new larger virtual disk Added the 2nd disk to the machine Used CloneZilla to clone the first disk onto the 2nd disk Removed the first disk Booted up off the 2nd (larger disk) But now I'm still stuck with an 8gb partition on my new 100gb virtual disk. Whats the easiest path from here to having a 100gb partition? :) I gather GPart can resize partitions, but it doesn't seem to support LVM2 partitions, which mine seems to be. thx Alex

  Read the article

• Installing Ubuntu 12.04 on EFI system

  - by aniruddhabhide

  Fellas, need help. Trying to install Ubuntu 12.04 on laptop to dual boot alongside Win7. I have UEFI and GPT partitioning scheme. It has optional Legacy boot mode though. I can boot from Ubuntu USB/CD in both Legacy and UEFI modes. But when I reach partition selection step, it gives me error "ubi-partman failed with exit code 141". I searched forums for this but those who encountered this error said it was resolved when they detached one of two HDs in their system. But I have only one hard disk attached and I am sure Ubuntu's GRUB supports GPT. But looks like it is not able to read GPT partitions on my HD. Any help regarding this will be appreciated.

  Read the article

• Error 5 partition table invalid or corrupt

  - by Clodoaldo

  I'm trying to add a second SSD to a Centos 6 system. But I get the Error 5 partition table invalid or corrupt at boot. The system already has a single SSD (sdb) and a pair of HDDs (sd{a,c}) in a RAID 1 array from where it boots. It is as if the new SSD assumes one of the devices of the RAID array. Is it? How to avoid that or rearrange the setup? # cat fstab UUID=967b4035-782d-4c66-b22f-50244fe970ca / ext4 defaults 1 1 UUID=86fd06e9-cdc9-4166-ba9f-c237cfc43e02 /boot ext4 defaults 1 2 UUID=72552a7a-d8ae-4f0a-8917-b75a6239ce9f /ssd ext4 discard,relatime 1 2 UUID=8000e5e6-caa2-4765-94f8-9caeb2bda26e swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 # ll /dev/disk/by-id/ total 0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:0 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:1 -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:2 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a04d7241:8da6023e:f9004352:107a923a -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a22c43b9:f1954990:d3ddda5e:f9aff3c9 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-f403a2d0:447803b5:66edba73:569f8305 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c500383621ff -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c5003838b2e7 -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5e83a97f592139d6 -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5e83a97f592139d6-part1 -> ../../sdb1 # fdisk -l Disk /dev/sdb: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x79298ec9 Device Boot Start End Blocks Id System /dev/sdb1 1 14594 117219328 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d99de Device Boot Start End Blocks Id System /dev/sdc1 1 1275 10240000 fd Linux raid autodetect /dev/sdc2 * 1275 1339 512000 fd Linux raid autodetect /dev/sdc3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b3327 Device Boot Start End Blocks Id System /dev/sda1 1 1275 10240000 fd Linux raid autodetect /dev/sda2 * 1275 1339 512000 fd Linux raid autodetect /dev/sda3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/md0: 10.5 GB, 10484641792 bytes 2 heads, 4 sectors/track, 2559727 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md2: 489.1 GB, 489095557120 bytes 2 heads, 4 sectors/track, 119408095 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 524 MB, 524275712 bytes 2 heads, 4 sectors/track, 127997 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table # cat /etc/grub.conf default=0 timeout=5 splashimage=(hd2,1)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-220.17.1.el6.x86_64) root (hd2,1) kernel /vmlinuz-2.6.32-220.17.1.el6.x86_64 ro root=UUID=967b4035-782d-4c66-b22f-50244fe970ca rd_MD_UUID=f403a2d0:447803b5:66edba73:569f8305 rd_MD_UUID=a22c43b9:f1954990:d3ddda5e:f9aff3c9 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=br-abnt2 crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-220.17.1.el6.x86_64.img

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >