Search Results

Search found 3176 results on 128 pages for 'integrated'.

Page 7/128 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Connecting a 2560x1440 display to a laptop?

  - by tjollans

  Having read Jeff Atwood's blog post on Korean 27" IPS LCDs, I've been wondering to what extent these are useful in a notebook + large display situation. I own a Lenovo Thinkpad Edge E320 with 2nd gen. integrated Intel graphics. According to the spec from Intel, this should support HDMI version 1.4, and, using DisplayPort, resolutions up to 2560x1600. HDMI version 1.4 supports resolutions up to 4096×2160, however, according to c't (German), the HDMI interface used with Intel chips only supports 1920x1200. The same goes for the DVI output - dual-link DVI-D, apparently, is not supported by Intel. It would appear that my laptop cannot digitally drive this kind of resolution. Now what about other laptops? According to the article in c't above, AMD's integrated graphics chips have the same limitation as Intel's. NVIDIA graphics cards, apparently, only offer resolutions up to 1900x1200 over HDMI out of the box, but it's possible, when using Linux at least, to trick the driver into enabling higher resolutions. Is this still true? What's the situation on Windows and OSX? I found no information on whether discrete AMD chips support ultra-high resolutions over HDMI. Owners of laptops with (Mini) DisplayPort / Thunderbolt won't have any issues with displays this large, but if you're planning to go for a display with dual-link DVI-D input only (like the Korean ones), you're going to need an adapter, which will set you back something like €70-€100 (since the protocols are incompatible). The big question mark in this equation is VGA: a lot of laptops have it, and I don't see any reason to think this resolution is not supported by the hardware (an oft-quoted figure appears to be 2048x1536@75Hz, so 2560x1440@60Hz should be possible, right?), but are the drivers likely to cause problems? Perhaps more critically, you'd need a VGA to dual-link DVI-D adapter that converts analog to digital signals. Do these exist? How good are they? How expensive are they? Is there a performance penalty involved? Please correct me if I'm wrong on any points. In summary, what are the requirements on a laptop to drive an external LCD at 2560x1440, in particular one that supports dual-link DVI-D only, and what tools and adapters can be used to lower the bar?

  Read the article

• IIS7 ISAPI Filter Module & HttpModule Events - How do they line up?

  - by MikeGurtzweiler

  So IIS7 in Integrated Pipeline mode uses a IsapiFilterModule to shim ISAPI filter DLL's and fire off the correct "events" on the filters, which is quite different than previous versions of IIS or IIS7 in classic mode because this means that HttpModules fire off right along side ISAPI filters in Integrated Pipeline mode. So does anyone happen to know how ISAPI events (http://msdn.microsoft.com/en-us/library/ms524855.aspx) and the HttpModule events (http://msdn.microsoft.com/en-us/library/ms998536.aspx) line up?

  Read the article

• Display issues on new OpenSUSE install

  - by user1319182

  I installed OpenSUSE 13.1 on my newly built PC, but the display is just horrible : the edges of the screen are missing. For example, I can't see all the top part, I can barely read the date and I see "ctivities" instead of "Activities". However, when I take a screenshot everything seems to be fine (the cursor doesn't appear though) the characters are sometimes too big and sometimes too small the cursor is huge and many other strange things. I took a few pictures I'm using an Intel integrated GPU (HD4400) and made all the possible updates with YaST. Any idea how I can fix this? Thanks

  Read the article

• Does running IIS7 in classic mode affect MVC output caching?

  - by Bob

  I have a need to run an application in classic mode for backwards compatibility with a specific application, and am trying to understand what kind of impact that will have on the performance of an MVC application that is running on the site. If we put a few static file maps (for .js, .css, .png, etc) above the ASP.NET wildcard map to reduce the amount of processing by the ASP.NET handler, will we be approaching the integrated mode in terms of performance? The thing i'm primarily concerned with is any effect this might have on output caching. I understand that integrated mode might (?) allow for the output cache to handle non ASP.NET content, but that isn't really a concern. We're more interested in ensuring that the MVC application has full use of the output cache. Empirically i've found that the two configurations operate on par when things go well, but if the page references resources that are not available, the integrated mode tends to fail much more quickly than the classic mode (e.g. 500 ms vs 10 seconds), reducing 'hang time' on the page load. Thanks for any feedback.

  Read the article

• Couldn't upload files to Sharepoint site while passing through Squid Proxy

  - by Ecio

  Hi all, we have this issue: one of our employees is collaborating with a supplier and he needs to upload documents on a Sharepoint site hosted on the supplier's main site. In our environment we use Squid Proxy to allow people navigate on the net (we have NTLM authentication and users transparently authenticate while using IE and FF). It seems that this specific Sharepoint site is using Integrated Windows Authentication only, and according to some research on the net it seems that this can have troubles with proxies. More specifically, we have tried two Squid versions: with Squid 3.0 we are unable to login to the site (the browser loads an empty page) with Squid 2.7 (that supports "Connection Pinning") we are able to login into the site, move on the different sections BUT.. when we try to upload a file that is bigger than a couple of KiloBytes (i.e. 10KB) the browser loads an error page (i think it's a 401 unauthorized but i must verify it) we've tried changing a couple of Squid options (in 2.7), what we got is that when you try to upload the file you got an authentication box (just like the initial login) and it refuses to go on even if you enter the same authentication credentials. What's really strange is that when you try to upload a small file (i.e. a text or binary 1KB file) the upload succeeds. I initially thought that maybe there was something misconfigured on their Sharepoint site but I've tried also this site: www.xsolive.com (it's a sharepoint 2007 demo site) and I've experienced the same problem. Has any of you experienced such behaviour? Thanks! Of course we've suggested to the supplier to activate also Basic+SSL and we're waiting for their reply..

  Read the article

• ATI Radeon HD7000 Series (Laptop) - Switch Mode Between ATI & Intel Integrated GPU. Stuck on Boot Screen On Intel GPU Selection Mode

  - by Monkey Drone

  Laptop Specs: HP Pavilion G6-2020SE GPUs 1) ATI HD7000 Series 2) Intel Integrated OS Installed: x) Ubuntu 12.04 (64 bit) i) ATI Graphics Card Drivers Installed From AMD website. Note: Graphics Card Drivers are Working Fine in 3D Mode. It runs a little Hot as it should since its a GPU. Observation) AMD Catalyst Control Centre Lets me Choose If I want to run the system in HIGH-END (ATI GPU) OR Intel Integrated (Better battery life) While I am on High End GPU Choice, Ubuntu works fine. Problem) But when I switch to Intel Mode in the AMD CCC and reboot the Machine. Ubuntu goes into 'Low Graphics Mode'. The problem is not that it goes into low graphics mode, it is completely expected since I am no longer using the ATI GPU but the integrated Intel GPU. Problem starts with the 'Selection' of the options. During that screen, I have no mouse on the screen (even tried plugging in an external USB mouse) & No Keyboard functionality. Thus I am left completely disabled to choose any option and load into Ubuntu. The Only thing I can do is switch to a terminal and enable ATI GPU through command-line and Ubuntu works Fine again. Is it a bug that there is no mouse/keyboard available to me during the startup of Ubuntu when its launched in Low-Graphics Mode? Any suggestions on how to pass through that? My palms are sweating as I write this down because the ATI GPU is really heating up my laptop. I dont want to boot into Windows or keep it around any longer than necessary. Please advise with help and directions. Sincerely, MonkeyD Edit1: The Answer by Celso has helped me switch to Intel, thus giving me sufficient battery power. Kudos to Celso. Now I can at least use my laptop for the time being without having it burn hair off my skin. I am still looking for answer to my original question of, 'why is lightdm not working properly when I switch to Intel GPU using ATI HD7000 series official drivers provided by AMD'.

  Read the article

• Pros and cons of integrated vs. standalone tools [closed]

  - by eckes

  When it comes to version control, for example, there seem to be two different types of users: those using standalone VCS tools those using integrated tools from their IDE In my opinion, both have pros: Integrated tools do everything out of the IDE, no need to leave the environment you're used to ... Standalone tools usable for every type of project, not only for those associated with an IDE always behave the same (e.g. no difference like Eclipse-SVN-Client vs. AnkhSVN client for VS) ... I would be interested in your opinions and use cases.

  Read the article

• SAML Identity Provider based on Active Directory

  - by Jarret

  I have a 3rd party program that supports web SSO using SAML 1.1 (it is ready to serve as the Service Provider, in other words). We would like to implement this SSO for our intranet users based on their Active Directory credentials. In other words, they've already logged on to their system, so let's simply use those credentials to facilitate an SSO. I am a little overwhelmed at where to begin, though. My initial thought is that IIS / Active Directory could easily serve as the Identity Provider since IIS gives us "Integrated Windows Authentication" abilities. I would think we could just create a .NET web app that requires Integrated Authentication which simply extracts the current user ID, builds the SAML response, and re-directs the user back to the Service Provider with this SAML response to complete the SSO. But then, my problem is that I simply have no real idea of how to go about creating this SAML response, the X.509 certs involved, etc... I am wondering if I am in over my head on this, or if creating this SAML response should be relatively easy. Note this SSO is to be used by intranet users only, so no need to worry about federating with other companies / domains.

  Read the article

• Does upgrading RAM causes increase in Graphic card's share?

  - by A.S.

  I have asked this question on Ask Ubuntu, and I was suggested to Upgrade RAM from most voted answers. But I got a point about my graphics card. Since, I can upgrade RAM and not graphics card, Does upgrading RAM also cause graphics memory to increase. To clear the point: My specs are given below: Laptop : Lenovo 3000 Y410. (bought in 2008 October) RAM: 1 GB (DDR2) External Graphics (Dedicated): N/A Internal Graphics (Shared): 256 MB Graphics Chipset: Intel GMA X3100 My Question is: If I increase my RAM to 3 GB, will it increase graphics cards share of the Memory. In other word, If graphics card shares 256 MB in 1GB RAM, will it share more, when I upgrade the RAM into 2GB or more ? Authentic resource link will be much appreciated I have recently known that, My chipset GMA X3100 can address 384 MB of RAM. So the question.

  Read the article

• Does a laptop with a GPU also use IGP?

  - by blee

  I have a Thinkpad T60 with dual screen setup: The laptop's LCD: Is normal looking. VGA external monitor: Looks "wavy," but I hooked it up to another computer and it looked fine. Does this imply my GPU is connected to the VGA-out and the built-in LCD is driven by IGP? Is this typically how a laptop with one GPU works? Thanks.

  Read the article

• Is it possible to integrate Computer Associates SiteMinder with SQLServer?

  - by Scott Weinstein

  We have a MS SQL BI stack which the standards group wants us to move to "WebSSO" which is based on Computer Associates SiteMinder/netegrity product. I figure integrating the web component won't be too hard, but we have users which connect to the Database directly - currently using Windows Authentication. Is is possible to itegrate Computer Associates SiteMinder with SQL Server? With SSAS? If so, how much effort is involved?

  Read the article

• cannot install new drivers for ATI Radeon HD mobility

  - by mugetsu

  I have an ATI mobility Radeon HD 3200 graphics card with a driver that I downloaded from my computer manufacturer's site. I wanted to upgrade the driver so I downloaded the respective driver from ATI and ran the installation. However, the installation only installs the download manager, the App SDK, C++ distributables and CCC, no display driver. When I try opening the CCC, I get an error that quits the CCC, something about the display driver not being recognized. What is wrong here? How do I go about fixing this? thanks

  Read the article

• How should I configure my Active Directory servers so that if one goes down, users are not kicked off SQL?

  - by Matty Brown

  Today, we shut down one of our Active Directory servers during office hours to check the loading on a UPS. Since all the server did was provide Active Directory in a separate building incase the main building caught fire, or whatever, we didn't think it would have any effect on our users. Seconds after the server was shut down, we had a dozen phone calls from users experiencing this issue:- [Microsoft SQL Server Login] SQLState: '28000' [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with authentication. Once we realized what had happened, we quickly rebooted the down Active Directory server. Problem solved. But why did this happen. And what if one day a server has a breakdown and is offline for hours, or days? Shouldn't the other Active Directory servers in the domain service authentication requests without disruption to users? We have 3 Windows Server 2003 Standard servers running Active Directory as Domain Controllers with Global Catalogs, all physically located on the same network at Gigabit speeds. I believe the domain was originally Windows Server 2000, or maybe even NT 4.0. Could the issue be to down to old Group Policies inherited from these old server OS's, or some default setting in Active Directory that needs changing?

  Read the article

• Laptop monitor goes black under intense graphics

  - by drahcir

  I have a dell inspiron 1520 with a nvidia GeForce 8600M GT video card. I have Windows 7 professional as an operating system. Yesterday when I was using it the screen started to somewhat flicker then go completely black. I restarted it and in the boot screen everything seems fine, when I entered the login screen it became flickery again, and when I logged in, when a couple of windows popped up it went black again. I hooked it up to a tft monitor and the monitor works fine, and did some more tests that confirmed that under higher graphics causes the laptop monitor to go black. Is there a reason why this is happening?

  Read the article

• Mac keeps switching to second graphics card

  - by 1.21 gigawatts

  I have a MacBook Pro and whenever I enter certain apps (video camera app or Photoshop for example, the graphics card switched. I didn't know this was going on at first; just that the screen kept changing colors as I opened or closed different software. Later someone told me that the software was causing the OSX to switch graphics cards. It's annoying. How do I keep one graphics card (the better one) enabled all the time? I don't care about power consumption because it is plugged in all the time (though I'm curious how much difference it makes). I just want one graphics card enabled.

  Read the article

• Intel GMA 4500MHD flickering in opengl

  - by Aaron

  I have an application that uses OpenGL for its display. When this application is run on a laptop with an Intel GMA 4500MHD on Windows XP the OpenGL content appears to flicker/shudder between 2 frames. I have experienced the exact same problem when running this application on nVidia Quadro FX hardware, however with nVidia the problem can be corrected by disabling the "Unified Back Buffer" (UBB) feature in the driver. Does anybody know how I can disable the corresponding feature in the Intel driver?

  Read the article

• Intel GMA 4500MHD flickering in opengl

  - by Aaron

  I have an application that uses OpenGL for its display. When this application is run on a laptop with an Intel GMA 4500MHD on Windows XP the OpenGL content appears to flicker/shudder between 2 frames. I have experienced the exact same problem when running this application on nVidia Quadro FX hardware, however with nVidia the problem can be corrected by disabling the "Unified Back Buffer" (UBB) feature in the driver. Does anybody know how I can disable the corresponding feature in the Intel driver?

  Read the article

• How to use dedicated video card instead of onboard?

  - by Mathias Lykkegaard Lorenzen

  I tried running DxDiag (DirectX diagnostics), and I noticed that my graphics card is set to the onboard one that comes with the Core i5 processor (some Intel HD stuff). On my computer, I also have a dedicated graphics card (an Nvidia 310). No serious gaming stuff, I know - just for programming. However, I would still love to know how to switch to that dedicated graphics card instead. My laptop is an MSI CX720.

  Read the article

• Weird glitches on Intel iGPU

  - by FrederikVds

  I have a weird problem that I can't manage to describe in one word, so I'm having trouble searching for a solution. My monitors sometimes go black for a tenth of a second. Other times, they show the image shifted a few centimeters to the left or to the right. This happens on both of my monitors, but not necessarily at the same time. I would say it happens about once a minute, unless under heavy load, in which case it can happen every second or so. Interestingly, heavy CPU/memory usage can also cause this, not just heavy GPU usage. This only happens when they are both at 1920x1080, not when one of them, or both, are at a lower resolution. It also happens when they are in mirrored mode instead of extended desktop mode. My GPU is obviously not at full clock speed most of the time: this happens at 350 MHz as well as at 1200 MHz. So it doesn't seem like a matter of too little performance. I'm not seeing any traditional artefacts, even when I use MSI Kombustor, only this kind of full-screen glitches. CPU stressing software isn't reporting any issues either. I'm thinking maybe the connection between my CPU and my PCH isn't fast enough, but I can't find anyone with the same problem to confirm that. I'd rather not invest in a discrete GPU without being certain it will fix something. Does anyone know how to search for this, or even better, does anyone have a solution? My full specs are below. Thanks in advance! Specs: ASUS P8Z77-M Intel Core i5-3570K (with Intel HD 4000 Graphics) 2x4 GB AMD Performance Edition memory Corsair Force 3 Series Rev. B 120GB SSD Maxtor 200GB HD Lite-On DVD-RW Antec 350 Watt PSU 64-bit Windows 7 Professional 2x Iiyama ProLite E2208HDS display

  Read the article

• Intermittent graphics issue

  - by Rob

  An older (~3 year old) PC I have passed on to my younger brother has a Sony 17" LCD monitor and uses on-board Intel GMA 3100 graphics (supports Aero under Windows 7 and no more is required). Recently he has complained to me twice that after booting up the screen looks all 'fuzzy'. Initially I thought maybe he messed up the ClearType settings by mistake, but resetting that did nothing. The only thing that finally worked was changing the resolution to something else temporarily, then setting it back to the original native (highest supported) resolution. The second time this happened the same 'fix' worked. This is happening only intermittently as of now and is not predictable/reproducible. I suspect either the monitor or on-board graphics is dying. How can I check and confirm which of the two it is (or maybe something else you guys can think of)? If it's the on-board graphics, would I be able to keep using the same motherboard with the addition of a cheap PCI-E graphics card?

  Read the article

• Cannot get to configure Kerberos for Reporting Services

  - by Ucodia

  Context I am trying to configure Kerberos in the domain for double-hop authentication. So here are the machines and their respective roles: client01: Windows 7 as client dc01: Windows Server 2008 R2 as domain controller and dns server01: Windows Server 2008 R2 as reporting server (native mode) server02: Windows Server 2008 R2 as SQL Server database engine I want my client01 to connect to server01 and configure a data source that is located on server02 using Intergrated Security. So as NTLM cannot push credentials that far, I need to setup Kerberos to enable double-hop authentication. The reporting service is runned by the Network Service service account and is configured only with the RSWindowsNegotiate options for authentication. Issue I cannot get to pass my client01 credential to server02 when configuring the data source on server01. Therefore I get the error: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. So I went on dc01 and delegated full trust for any service to server01 but it not fixed the problem. I want to notice that I did not configured any SPNs for server01 because Reporting Service is runned by Network Service and from what I read on the Internet, when Reporting Services is going up with Network Service, SPNs are automatically registered. My problem is that even if that I want to configure SPNs manually, I do not know where I have to set them up. On dc01 or on server01? So I went a bit further on the issue and tried to trace this problem. From my understanding of Kerberos, this is what should happen on the network when I try to connect the data source: client01 ---- AS_REQ ---> dc01 <--- AS_REP ---- client01 ---- TGS_REQ ---> dc01 <--- TGS_REP ---- client01 ---- AP_REQ ---> server01 <--- AP_REP ---- server01 ---- TGS_REQ ---> dc01 <--- TGS_REP ---- server01 ---- AP_REQ ---> server02 <--- AP_REP ---- So captured my local network with Wireshark, but whenever I try to configure my data source from client01 on server01 to pass my credentials to server02, my client never sends a AS_REQ or TGS_REQ to the KDC on dc01. Questions So does anyone can tell me if I should configure the SPNs and on which machine does it have to be configured? Also why client01 never request for a TGT or a TGS to my KDC. Do you think there is something going wrong with the DC role of dc01?

  Read the article

• How to get the current application pool user in IIS when using impersonate=true?

  - by Simon

  In .net when a website hosted in IIS how do you get the current user the website is running under. ie the Application Pool user not the the current user accessing the site. Using windows integrated and impersonate. <authentication mode="Windows"/> <identity impersonate="true"/>

  Read the article

• IIS7 Itegrated Pipeline Mode: Context.User is intermittently null for Windows Auth

  - by AndyV

  Our code relies on checking the Context.User.Identity value in the Global.asax Application_AuthenticateRequest(...) method to retrieve some information about the logged in user. This works fine in classic mode but when I flip IIS to use the Integrated Pipeline "Context.User" comes back as null, but only intermittently. Any ideas why? I have < authentication mode="Windows" and only Windows Auth enabled in the Virtual Directory.

  Read the article

• Why is LOGON_USER Server Variable is blank on New Windows / New Tab?

  - by Alex Papadimoulis

  We are noticing some very strange behavior on an installation of a .NET2-based webapp on Server 2008. Our app uses "old school" Integrated Windows Authentication and simply reads the LOGIN_USER server variable from the request collection. There's a good reason for this, but that's somewhat irrelevant to the question, since the underlying WindowsAuthentication code from ASP.NET does the same thing. Anyway... When you enter the URL in the browser, it loads up just fine and displays the username (from LOGIN_USER) no problem. When you click on a link within the web app, it loads the page just fine and authenticates without any problems. When you "hard refresh" (Ctrl-F5) it also works just fine. However, when you click "open in a new window" or "open in a new tab", the LOGON_USER variable is blank Any ideas? Am I missing some IIS7 setting somewhere? Tested clients are Windows 7 with IE8 or Windows XP with IE6.

  Read the article

• Authenticating mssql users through different logins

  - by Sebastian Ferreyra

  I'm developing a new node.js based frontend for an old intranet site using mssql server and Classic ASP. Both the new and the old site will coexist during the transition phase and both must access the same mssql server using the same database principals. The old ASP/IIS site uses integrated windows login. The new node-based frontend has to use sql server based logins/principals (edit: while the IIS/ASP site must keep using Windows server principals) and all existing database users/principals must keep working wherever they login from. From reading around, it appears that a database principal can not be assigned to multiple server principals, therefore it seems unlikely there's a simple solution to this. I'd like to know if anybody has had to deal with a similar situation before and how they've gone about it.

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >