Search Results

Search found 928 results on 38 pages for 'mr anderson'.

Page 7/38 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• How well will ntpd work when the latency is highly variable?

  - by JP Anderson

  I have an application where we are using some non-standard networking equipment (cannot be changed) that goes into a dormant state between traffic bursts. The network latency is very high for the first packet since it's essentially waking the system, waiting for it to reconnect, and then making the first round-trip. Subsequent messages (provided they are within the next minute or so) are much faster, but still highly-latent. A typical set of pings will look like 2500ms, 900ms, 880ms, 885ms, 900ms, 890ms, etc. Given that NTP uses several round trips before computing the offset, how well can I expect ntpd to work over this kind of link? Will the initially slow first round trip be ignored based on the much different (and faster) following messages to/from the ntp server? Thanks and Regards.

  Read the article

• How to create a readonly root linux: Can be mounted as writeable for persistent changes?

  - by Mr Anderson

  I'd like a read only file system that runs almost entirely in RAM but the compact flash or hardrive can be mounted and made writeable to make persistent changes. How do I do this on Linux? I've looked at several tutorials but none really explain how to create such a system with the option of being able to mount the storage device and make persistent changes. I looked at this so far: http://chschneider.eu/linux/thin_client/ I also looked on the old gentoo wiki but the article was very specific to Gentoo. I'll be using a debian based Linux but it would be nice I've someone could explain to me how to do this in pretty generic instructions ,that would work on any Linux distro. Thanks.

  Read the article

• Can I cancel a resize operation in GParted without causing data loss?

  - by Anderson Green

  I'm currently waiting for GParted to finish resizing a partition, but the progress bar is currently at 0, and it's been taking much longer than usual (perhaps an hour). Is it safe to cancel the resize operation? I don't want to wait days for the resize operation to complete, but I don't want to lose all of my files either. (Is there any way that I can simply pause the resize operation, attempt to recover files, and then resume the resize operation?) (An update: the operation has finally completed, and my files are still intact!)

  Read the article

• Setup a new domain controller over a temporary VPN, but now Windows delays startup?

  - by Kris Anderson

  I'm migrating servers from colo locations to Amazon's VPC EC2 instances. If anyone hasn't worked with Amazon VPC before, VPN is a pain in the arse! Anyways, I setup a new server that acts as the domain controller for our Amazon VPC. In order to migrate all the user accounts from our existing domain controllers I manually connected to our colo VPN using my user account on the new Amazon EC2 machine. I was able to join the domain and the new Amazon server became another domain controller on our network. So far so good. The problem I'm having is that when booting the EC2 domain controller (which is no longer connected to the VPN so it can't communicate with the existing controllers), it takes a good 6-8 minuted before I can remote into the server (instead of the 1-2 minutes it should take). Also, during this time most of the services we also run (like IIS) also give 404 errors until the 6-8 minutes have passed. It's almost like the domain controller is attempting to reach the other domain controllers first and after 6-8 minutes it falls back to the one located on the local machine? I don't think that's what's happening though, because Server 2008 R2 doesn't have primary and backup domain controllers. They're all equal as far as Windows is concerned. For my network adapter I have only one DNS listed, 127.0.0.1, so it should be looking up the local domain controller and not the other domain controllers it connected to over VPN when VPN was enabled. In the server logs I'm seeing these warnings pop up during a reboot: The winlogon notification subscriber is taking long time to handle the notification event (CreateSession). The winlogon notification subscriber took 409 second(s) to handle the notification event (CreateSession). Any ideas on what's happening here? I would try removing the existing domain controllers from the new Amazon EC2 machine, but I still need to connect over VPN a few times to migrate some data between the servers, and I don't want that change being reflected back to the other domain controllers in our colo locations.

  Read the article

• How to troubleshoot Hyper-V VSS writer causing backup failure on Server 2008 R2

  - by Tim Anderson

  I have a Windows Server 2008 R2 machine running Hyper-V. Backups using Windows Server Backup fail with the error: The backup operation that started at '?2011?-?01?-?02T10:37:01.230000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved. I have traced this to a problem with the Hyper-V VSS writer. vssadmin list writers reports: Writer name: 'Microsoft Hyper-V VSS Writer' Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} Writer Instance Id: {fcf0dd79-d282-4465-88ae-7b6857e055c2} State: [8] Failed Last error: Inconsistent shadow copy However I can't get any further. A few relevant facts: I get the error even if all the VMs are shut down If I disable the Hyper-V VSS Writer by stopping the Hyper-V Management Service backup completes OK There are no errors in the Hyper-V-VMMS application log I tried to set tracing for VSS but can't get any output for some reason. I set the correct registry entries but no trace log is generated. Tim

  Read the article

• How to backup/restore OSX Parental Controls before/after complete reimage?

  - by Jim Anderson

  We typically "nuke and pave" users Mac OSX laptops if they have software issue. Prior to doing so, we backup the primary (non-admin) user's home folder. Our standard image has four accounts: Admin (uber admin user); Parent (admin account for the parents of students); Loaner (so our standard image will also work for our loaner laptop pool); Student (this is the primary, non-admin user of the laptop) Our standard image has only minimal Parental controls on the Loaner and Student accounts. Some parents choose to tighten the parental controls. We never know when parents have made changes to parental controls, or what those changes are. Once we have reimaged the machine with our standard image (minimal parental controls) we would like to be able to restore any custom parental controls parents may have placed on their student's account. Any help in this would be appreciated. Thanks.

  Read the article

• MSSQL Auditing Recomendations

  - by Josh Anderson

  As an aspiring DBA, I have recently been asssigned the task of implementing the tracking of all data changes in the database for a peice of software we are developing. After playing with microsoft's change data capture methods, Im looking into some other solutions. We are planing to distribute our product as a hosted solution and unlimited installations would be desired for maximum scalability. Ive looked at IBM's Guardium as well as DB Audit by SoftTree. Im curious if anyone has any solutions they may have used in the past or possibly any suggestions or methods to achieve complete, and of course cost effective, auditing of data changes.

  Read the article

• Sas/Sata raid controller with dedicated management interface?

  - by Nick Anderson

  I am looking for an internal raid controller that has a dedicated Ethernet port for management. I would really like to have operating system independent management of the raid without having to drop to BIOS. For some reason I think I have seen these in the past but cant find any for the life of me now.

  Read the article

• What is the harm in giving developers read access to application server application event logs?

  - by Jim Anderson

  I am a developer working on an ASP.NET application. The application writes logging messages to the Windows event log - a custom application log just for this application. However, I do not have any access to testing or staging web/application servers. I thought an admin could just give me read access to this event log to help in debugging problems (currently a service that is working in dev is not working in test environment and I have no idea why) but that is against my client's (I'm a consultant) policy. I feel silly to keep asking an admin to look at the event log for me. What is the harm in giving developers read access to application server application event logs? Is there a different method of application logging that sysadmins prefer programmers use? Surely, admins don't want to be fetching logging messages for developers all the time.

  Read the article

• Fax in Small Business Server 2003 fails to hang up

  - by Tim Anderson

  We have a problem with fax in SBS 2003. External modem, Courier v Everything which is a recommended model. It receives a fax OK, but then sometimes (quite often) fails to hang up. Attempts to send faxes thereafter get an engaged tone. The only fix when this happens is to reset the fax modem. Even restarting the server is not enough. We've tried with a different model modem, same problem. Any ideas? Tim

  Read the article

• Accessing multiple local HD's or RAID with ESXi 4.0

  - by Shawn Anderson

  How to I get additional HD's to be recognized and used by ESXi 4.0. When I purchased my system I had two 2TB HD's, but when I installed ESXi it only recognized one of them. I'm happy to get whatever number of drives that I need (I have a four bay SATA in my Dell T310). What are some options? RAID? If so, is it supported. I guess I would need hardware instead of software since ESXi is so small. The VMWare forums (where I've lived for the last two days) are a charlie foxtrot of outdated and conflicting info. I want to utilize my T310, with 32 GB RAM, 2.8GHz quad core to run many lab Windows VM's. I don't need production level availability but I do want decent performance, even though it's in a lab environment. A huge thanks to Jim B., Zypher, Helvick, and Jeff Hengesbach who posted answers to my earlier predecessor question on why ESXi was so sluggish.

  Read the article

• Is there a performance difference between Cat5 and Cat6 keystone blocks?

  - by Scott Anderson

  I'm going to be wiring my home for ethernet soon, and I've already decided that I want to use Cat6 cable to do it (faster speeds, better performance, etc). During the installation, I'd like to add wall-plates to certain rooms in my house, and the keystone blocks look like the best option for me. My question is: I've seen different keystone blocks on many cabling websites, some say Cat5e and some say Cat6. The Cat6 ones are slightly more expensive. Is there any noticeable performance gain from using a Cat6 keystone? To me, it just seems like the keystone really wouldn't matter, since it's basically like putting an RJ-45 end on a cable. Can I buy the cheaper Cat5e keystone blocks and still have the performance that Cat6 cable will give me? Thanks!

  Read the article

• Bash script getting automatically deleted from Ubuntu 12.04 Server?

  - by Kris Anderson

  I'm running a bash script on an ubuntu 12.04 through cron. The script works fine for a few weeks (runs daily backups of websites, mysql databases, and copies to Amazon S3). However, twice now I've noticed that backups stopped happening. Both times the backup script (backupscript.sh) located in my home folder was no longer there. No one else has access to this server, so nothing was manually changed on the server and no one deleted the file by mistake. The cron job (nano /etc/crontab) still references this script, but the script itself disappears. What could cause this to happen? Does Ubuntu delete the script if it runs into some sort of error?

  Read the article

• SharePoint 2010 and Excel Calculation Services

  - by Cj Anderson

  I'm curious what the requirements are for Excel Calculation Services in Sharepoint 2010. I found an architecture document but it doesn't list out the specific requirements. (architecture I understand that you can install all the services on one server but it isn't recommended. It then talks about how you can scale up the application servers, and web front ends. What should the hardware look like for both the application server and web front ends? Do I need to setup a standalone box for each application server?

  Read the article

• Under what circumstances might an IIS6 website be automatically deleted?

  - by E. Anderson

  Late last week my colleagues did some hardware maintenance on one of our vmWare esxi servers. One of the guests is a Windows Server 2003 Web Edition system that runs our low-traffic web sites. We discovered this morning that one of those websites was no longer working with what appeared to be an SSL error. After logging in, I found that the web site in question had been deleted from IIS! Is it possible for this to happen without a user actually going in and deleting that single web site? All of the other sites were fine. The files for the site in question had not been touched. I just re-created the web site, assigned the SSL cert, and everything was working again. When I logged in, I did see the 'Unexpected Shutdown' dialog.

  Read the article

• is there a GOTCHA - DBCC CHECKDB ('DBNAME', NOINDEX)?

  - by Deb Anderson

  I am turning on DBCC CHECKDB in our OLTP environment (SQL 2005,2008). System overhead is a very visible thing on our serversso I want them to be as efficient as it makes sense for them to be. HENCE - I want to turn on the NOINDEX option, an option I've never used before. My thoughts are these: if there is a problem with an index that is detected outside the integrity check, that I can just rebuild the index. Also the duration of the integrity checks will be drastically reduced, and the nastier corruption will be detected. What is the flaw in my plan? Thanks, Deb

  Read the article

• Create a dependent drop down list in a single cell in Excel

  - by Larry Anderson

  I am trying to create a dependent drop down list for a High School. The User will select cell A1, Click on Hallway 3(for example), then the user will click on cell A1 again and then select the Room #, 325 (for example). The final result should be that cell A1 shows 325. I can create the first drop down list, but the second part is where I am having great trouble. I am using Excel 2010. Any help would be appreciated. Thanks

  Read the article

• Exchange 2007 automatically adding IP to block list

  - by Tim Anderson

  This puzzled me. We have all mail directed to an ISP's spam filter, then delivered to SBS 2008 Exchange. One of the ISP's IP numbers suddenly appeared in the ES2007 block list, set to expire in 24 hours I think, so emails started bouncing. Quick look through the typically ponderous docs, and I can't see anything that says Exchange will auto-block an IP number, but nobody is admitting to adding it manually and I think it must have done. Anyone know about this or where it is configured? Obviously one could disable block lists completely but I'd like to know exactly why this happened.

  Read the article

• Exchange 2007 automatically adding IP to block list

  - by Tim Anderson

  This puzzled me. We have all mail directed to an ISP's spam filter, then delivered to SBS 2008 Exchange. One of the ISP's IP numbers suddenly appeared in the ES2007 block list, set to expire in 24 hours I think, so emails started bouncing. Quick look through the typically ponderous docs, and I can't see anything that says Exchange will auto-block an IP number, but nobody is admitting to adding it manually and I think it must have done. Anyone know about this or where it is configured? Obviously one could disable block lists completely but I'd like to know exactly why this happened.

  Read the article

• stock management of assemblys and its sub parts

  - by The Disintegrator

  I have to track the stock of individual parts and kits (assembly) and can't find a satisfactory way of doing this. Sample bogus and hyper simplified database: Table prod: prodID 1 prodName Flux capacitor prodCost 900 prodPrice 1350 (900*1.5) prodStock 3 - prodID 2 prodName Mr Fusion prodCost 300 prodPrice 600 (300*2) prodStock 2 - prodID 3 prodName Time travel kit prodCost 1650 (1350+300) prodPrice 2145 (1650*1.3) prodStock 2 Table rels relID 1 relSrc 1 (Flux capacitor) relType 4 (is a subpart of) relDst 3 (Time travel kit) - relID 2 relSrc 2 (Mr Fusion) relType 4 (is a subpart of) relDst 3 (Time travel kit) prodPrice: it's calculated based on the cost but not in a linear way. In this example for costs of 500 or less, the markup is a 200%. For costs of 500-1000 the markup is 150%. For costs of 1000+ the markup is 130% That's why the time travel kit is much cheaper than the individual parts prodStock: here is my problem. I can sell kits or the individual parts, So the stock of the kits is virtual. The problem when I buy: Some providers sell me the Time Travel kit as a whole (with one barcode) and some sells me the individual parts (with a different barcode) So when I load the stock I don't know how to impute it. The problem when I sell: If I only sell kits, calculate the stock would be easy: "I have 3 Flux capacitors and 2 Mr Fusions, so I have 2 Time travel kits and a Flux Capacitor" But I can sell Kits or individual parts. I have to track the stock of the individual parts and the possible kits at the same time (and I have to compensate for the sell price) Probably this is really simple, but I can't see a simple solution. Resuming: I have to find a way of tracking the stock and the database/program is the one who has to do it (I cant ask the clerk to correct the stock) I'm using php+MySql. But this is more a logical problem than a programing one

  Read the article

• Stock management of assemblies and its sub parts

  - by The Disintegrator

  I have to track the stock of individual parts and kits (assemblies) and can't find a satisfactory way of doing this. Sample bogus and hyper simplified database: Table prod: prodID 1 prodName Flux capacitor prodCost 900 prodPrice 1350 (900*1.5) prodStock 3 - prodID 2 prodName Mr Fusion prodCost 300 prodPrice 600 (300*2) prodStock 2 - prodID 3 prodName Time travel kit prodCost 1650 (1350+300) prodPrice 2145 (1650*1.3) prodStock 2 Table rels relID 1 relSrc 1 (Flux capacitor) relType 4 (is a subpart of) relDst 3 (Time travel kit) - relID 2 relSrc 2 (Mr Fusion) relType 4 (is a subpart of) relDst 3 (Time travel kit) prodPrice: it's calculated based on the cost but not in a linear way. In this example for costs of 500 or less, the markup is a 200%. For costs of 500-1000 the markup is 150%. For costs of 1000+ the markup is 130% That's why the time travel kit is much cheaper than the individual parts prodStock: here is my problem. I can sell kits or the individual parts, So the stock of the kits is virtual. The problem when I buy: Some providers sell me the Time Travel kit as a whole (with one barcode) and some sells me the individual parts (with a different barcode) So when I load the stock I don't know how to impute it. The problem when I sell: If I only sell kits, calculate the stock would be easy: "I have 3 Flux capacitors and 2 Mr Fusions, so I have 2 Time travel kits and a Flux Capacitor" But I can sell Kits or individual parts. So, I have to track the stock of the individual parts and the possible kits at the same time (and I have to compensate for the sell price) Probably this is really simple, but I can't see a simple solution. Resuming: I have to find a way of tracking the stock and the database/program is the one who has to do it (I cant ask the clerk to correct the stock) I'm using php+MySql. But this is more a logical problem than a programing one

  Read the article

• A jscript variable in a Query

  - by lerac

  Maybe a very simple question. How can I put in this code <Query> <Where> <Eq> <FieldRef Name="Judge_x0020_1" /> <Value Type="Text">mr. R. Sanches</Value> </Eq> </Where> </script> </Query> A variable from jscript in the area of the code where mr. R. Sanches is written. So my jScript contains a dynamic text variable I want to replace mr. R. Sanches with. See where it says THE JAVESCRIPT VAR underneath here: <Query> <Where> <Eq> <FieldRef Name="Judge_x0020_1" /> <Value Type="Text">THE JAVASCRIPT VAR</Value> </Eq> </Where> </script> </Query>

  Read the article

• Stock management of assemblies and its sub parts (relations)

  - by The Disintegrator

  I have to track the stock of individual parts and kits (assemblies) and can't find a satisfactory way of doing this. Sample bogus and hyper simplified database: Table prod: prodID 1 prodName Flux capacitor prodCost 900 prodPrice 1350 (900*1.5) prodStock 3 - prodID 2 prodName Mr Fusion prodCost 300 prodPrice 600 (300*2) prodStock 2 - prodID 3 prodName Time travel kit prodCost 1650 (1350+300) prodPrice 2145 (1650*1.3) prodStock 2 Table rels relID 1 relSrc 1 (Flux capacitor) relType 4 (is a subpart of) relDst 3 (Time travel kit) - relID 2 relSrc 2 (Mr Fusion) relType 4 (is a subpart of) relDst 3 (Time travel kit) prodPrice: it's calculated based on the cost but not in a linear way. In this example for costs of 500 or less, the markup is a 200%. For costs of 500-1000 the markup is 150%. For costs of 1000+ the markup is 130% That's why the time travel kit is much cheaper than the individual parts prodStock: here is my problem. I can sell kits or the individual parts, So the stock of the kits is virtual. The problem when I buy: Some providers sell me the Time Travel kit as a whole (with one barcode) and some sells me the individual parts (with a different barcode) So when I load the stock I don't know how to impute it. The problem when I sell: If I only sell kits, calculate the stock would be easy: "I have 3 Flux capacitors and 2 Mr Fusions, so I have 2 Time travel kits and a Flux Capacitor" But I can sell Kits or individual parts. So, I have to track the stock of the individual parts and the possible kits at the same time (and I have to compensate for the sell price) Probably this is really simple, but I can't see a simple solution. Resuming: I have to find a way of tracking the stock and the database/program is the one who has to do it (I cant ask the clerk to correct the stock) I'm using php+MySql. But this is more a logical problem than a programing one

  Read the article

• How to identify ideas and concepts in a given text

  - by Nick

  I'm working on a project at the moment where it would be really useful to be able to detect when a certain topic/idea is mentioned in a body of text. For instance, if the text contained: Maybe if you tell me a little more about who Mr Balzac is, that would help. It would also be useful if I could have a description of his appearance, or even better a photograph? It'd be great to be able to detect that the person has asked for a photograph of Mr Balzac. I could take a really naïve approach and just look for the word "photo" or "photograph", but this would obviously be no good if they wrote something like: Please, never send me a photo of Mr Balzac. Does anyone know where to start with this? Is it even possible? I've looked into things like nltk, but I've yet to find an example of someone doing something similar and am still not entirely sure what this kind of analysis is called. Any help that can get me off the ground would be great. Thanks!

  Read the article

• constructor function's object literal returns toString() method but no other method

  - by JohnMerlino

  I'm very confused with javascript methods defined in objects and the "this" keyword. In the below example, the toString() method is invoked when Mammal object instantiated: function Mammal(name){ this.name=name; this.toString = function(){ return '[Mammal "'+this.name+'"]'; } } var someAnimal = new Mammal('Mr. Biggles'); alert('someAnimal is '+someAnimal); Despite the fact that the toString() method is not invoked on the object someAnimal like this: alert('someAnimal is '+someAnimal.toString()); It still returns 'someAnimal is [Mammal "Mr. Biggles"]' . That doesn't make sense to me because the toString() function is not being called anywhere. Then to add even more confusion, if I change the toString() method to a method I make up such as random(): function Mammal(name){ this.name=name; this.random = function(){ return Math.floor(Math.random() * 15); } } var someAnimal = new Mammal('Mr. Biggles'); alert(someAnimal); It completely ignores the random method (despite the fact that it is defined the same way was the toString() method was) and returns: [object object] Another issue I'm having trouble understanding with inheritance is the value of "this". For example, in the below example function person(w,h){ width.width = w; width.height = h; } function man(w,h,s) { person.call(this, w, h); this.sex = s; } "this" keyword is being send to the person object clearly. However, does "this" refer to the subclass (man) or the super class (person) when the person object receives it? Thanks for clearing up any of the confusion I have with inheritance and object literals in javascript.

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >