Search Results

Search found 198 results on 8 pages for 'remix tj'.

Page 7/8 | < Previous Page | 3 4 5 6 7 8  | Next Page >

• BIOS root kit? Or, how do I fresh install a clean BIOS?

  - by Leopold_Bloom

  So I was installing questionable operating system onto my EEE pc and it required me to downgrade the BIOS which I really am not an expert at. I used a patch and it appeared to work. Now, I'm paranoid about the downgrade because, honestly, I have no idea where the code came from or what could be in it. My question, then, is it possible to "start over" completely fresh with my BIOS? As in wipe out the possibly malicious BIOS and go back to the manufacturer-provided one? Has anyone done something similar to this? I just want to install Ubuntu Netbook Remix to the EEE pc 1000 but I want to make sure the BIOS are secure. Any advice would help tremendously, or am I just being uber paranoid? BIOS are definitely not my strength.

  Read the article

• Clone a 2TB WD Green internal drive with bad sectors to a 3TB partitioned external

  - by ron

  I have a 2TB WD Black drive and would like to simply do a straight clone from a failing 3TB drive to it. Both are SATA. Will I be able to just install the new drive alongside the faulty one and then do the clone/rescue attempt with ddrescue or is there a better method? The faulty internal drive mentioned has bed sectors although am usually able to boot into Windows 7 Ultimate with it and navigate and access all my programs. I have been attempting some trials with an Ubuntu Live CD using ddrescue but am not sure I'm doing it right. I have a 3TB WD my book essential external which is GPT and have created a separate 2TB partition on it which I am trying to clone to. I assume I need to format the new drive first to NTFS? Can I do that via the Ubuntu Rescue Remix 12-04 live DVD that I've been booting with?

  Read the article

• Earth’s Radiation Belt Sounds like Whale Song [Video]

  - by Jason Fitzpatrick

  The radio frequencies of Earth’s radiation belt have uncanny resemblance to a sort of whale/bird song remix. Check out this video to learn more about NASA’s efforts to explore the belts and listen to the Earth’s song. When we hear the “song” of the Earth, exactly what are we hearing? Science@NASA explains: Chorus is an electromagnetic phenomenon caused by plasma waves in Earth’s radiation belts. For years, ham radio operators on Earth have been listening to them from afar. Now, NASA’s twin Radiation Belt Storm Probes are traveling through the region of space where chorus actually comes from–and the recordings are out of this world. “This is what the radiation belts would sound like to a human being if we had radio antennas for ears,” says Kletzing, whose team at the University of Iowa built the “EMFISIS” (Electric and Magnetic Field Instrument Suite and Integrated Science) receiver used to pick up the signals. He’s careful to point out that these are not acoustic waves of the kind that travel through the air of our planet. Chorus is made of radio waves that oscillate at acoustic frequencies, between 0 and 10 kHz. The magnetic search coil antennas of the Radiation Belt Storm Probes are designed to detect these kinds of waves. HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

  Read the article

• How to install Ubiquity into a Live CD installation image?

  - by Patrick L

  I am trying a create a small Ubuntu installation ISO image. I am using a tool called Ubuntu-Builder. To make the final ISO as small as possible, I have decided to use Ubuntu Mini Remix. It is a small Live CD without GUI. It does not come with any installer software like Ubiquity. I want to embed an installer software into the ISO image so that user can install it into harddisk. In Ubuntu-Builder, I have tried the following: Install LXDE Desktop, then install Ubiquity. But the final ISO boots into command line. Install OpenBox Desktop, then install Ubiquity. But the final ISO boots into command line. Do not install DE, directly install Ubiquity. But the final ISO still boots into command line. After booting up from ISO, I have checked the software in the OS. It seems that Ubiquity has been installed. But it didn't show up when I boot the ISO image. Anyone knows how to install Ubiquity into a Live CD ISO image? Anyone knows any text mode installer which can replace Ubiquity?

  Read the article

• crunchbang: it takes up *how* much memory?!?!

  - by Theo Moore

  I've been trying many distros of Linux lately, trying to find something I like for my netbook. I started out with Ubuntu, and I can tell you I am a big fan. Ubuntu is now fast to install, much simpler to administer, and pretty light resource-wise. My original install was the standard 32 bit version of 9.04. I tried the netbook remix version of this release, but it was very, very slow. Even the full-blown version used only about 200mb. Much better than the almost 800 that the recommended Windows y version took. Once the newest release of Ubuntu was released, I decided to try the netbook remx of 10.04. It used even less RAM; only about 150mb. I thought I'd found my OS. I certainly settled in and prepared to use it forever. Then, someone I know suggested I try cunchbang. It is the most minimalistic UI I've ever seen, using Openbox rather than Gnome or KDE. Very slick, simple and clean. Since I am using the alpha of the most recent version (using Debian Squeeze), the apps provided for you are few...although more will be provided soon. You do have a word processor, etc., although not the OpenOffice you would normally get in Ubuntu. But the best part? 48MB. That's it. 48mb fully loaded, supporting what I can "hotel services". It's fast, boots quick, and believe it or not, I can even do Java-based development....on my netbook! Pretty slick.   More on it as I use it.

  Read the article

• Freemake–Incredibly Simple, Yet Powerful Free Video Convertor

  - by Gopinath

  Are you looking for an easy to use and powerful video convertor that lets you to convert any video to iPad, iPhone, iPod, PSP, PS3 or Android smartphones format? Here is Freemake Video Convertor. Freemake Video Convertor belongs to the few set of apps that we love on first use – like love at first sight. It’s user interface clean, colourful and very friendly. Like Apple products “it just works” without any learning curve. It’s a one stop application for all your video processing needs- converting, editing, and burning. The predefined profiles offered by the application makes it simple to convert a video to fit into devices like iPad, iPhone, iPod, blackberry and any other smartphone out there. It works with 200+ input video formats, converts to almost all the popular formats we need. You can extract MP3 audio from videos, convert a bunch of photos to a beautiful video, add subtitles to a video, remix video with a music track, upload to YouTube, burn them to DVD, create an ISO and the list goes on. You can read them over here. This application is simply the best video conversion tool available in the market. Need a proof – check out the awards this application received on their home page: Lifehacker Best of 2010, PC Mag Best of 2011, Download Squad Top 2010, Softpedia 5 Stars. Download Freemaker Free Video Convertor This article titled,Freemake–Incredibly Simple, Yet Powerful Free Video Convertor, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• My processor is not detected intel core 2 duo

  - by walid

  My processor is not detected intel core 2 duo When I type $uname -m -p I get this i686 unknown I have Ubuntu 10.10 netbook remix but the cat /proc/cpuinfo gives right identification of two processors as below processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.53 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: The problem is with programs that uses more than one core like virtualbox and bitcoin which refuses to use more than one core Is there anythign wrong or anything that I can do? My installation is from a live usb iso on a USB

  Read the article

• Pluscom MAC address shows up but "wireless unavailable"

  - by Luigi

  I've got a pluscom pci card plugged into my desktop and although the mac address shows up in network manager, it says "Wireless unavailable". I'm using Ubuntu 12.10 Gnome Shell Remix... edgar@edgarQuantal:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off edgar@edgarQuantal:~$ ifconfig eth0 Link encap:Ethernet HWaddr 6c:f0:49:02:1f:b8 inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fe02:1fb8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1425 errors:0 dropped:0 overruns:0 frame:0 TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:995753 (995.7 KB) TX bytes:134079 (134.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:363 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:40828 (40.8 KB) TX bytes:40828 (40.8 KB) It looks the same as the problem as here, seems quite complicated: http://ubuntuforums.org/showthread.php?t=1993226 Tried downloading the driver but i get this: "Unpacking firmware-ralink (from .../firmware-ralink_0.36_all.deb) ... dpkg: error processing /home/edgar/Downloads/firmware-ralink_0.36_all.deb (--install): trying to overwrite '/lib/firmware/rt2870.bin', which is also in package linux-firmware 1.95"

  Read the article

• Picasa installs but is missing in the menu

  - by Swapnil Narendra

  Acer Aspire One Netbook Running Ubuntu Netbook Remix 10.10 (freshly installed) 1 GB Ram 150 GM HDD Space I am trying to install Picasa and when I do, it runs its course telling me that it has been installed. But when I try to look for Picasa to run it, it didnt show in the menu anywhere. I am unable to find Picasa on my system and it says that it has been installed already when I try to reinstall it. I have tried a few things; looked for the key: wget -q -O - https://dl-ssl.google.com/linux/linux_signing_key.pub | apt-key add - .. and then added it. tried the following commands after adding Picasa to my source list: sudo apt-get upgrade sudo apt-get install picasa and here is what I got: swapnil@iva-swapo-netbook:~$ sudo apt-get install picasa Reading package lists... Done Building dependency tree Reading state information... Done picasa is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. and when I tried to look for Picasa again.. I couldnt find it. So I am unable to install Picasa on my system. Please help. (I am also running this thread on ubuntu forums and havent got the solution yet so I am now here) tried Jorge's solution and it brought Picasa immediately, however I am unable to keep it in the launcher. There is no such option. All I can see is only 2 options: 1. Wine 2. Quit Still need help to keep it in the menu/launcher !

  Read the article

• Upgrade to 12.04 results to empty Dash, no date & time either on the top panel

  - by Nicolas

  I've upgraded from Ubuntu netbook remix something to 12.04 LTS, and I've got two issues. (Got an Asus eeePc 32bits, Intel 945GME x86/MMX/SSE2 and Intel Atom CPU N270 @ 1.6Ghz x2) Nothing in the Dash. Only the "home" tab, other tabs are missing. No search results whatsoever. Missing elements in the system panel, privacy and date & time. No date & time on the right corner either. I've tried to reset unity with the terminal but the process was a whole mess full of errors. It did show date & time in the system panel (not on the top-right corner) while the process was going on in the terminal. But then it was such a mess (no more icons on the right corner amongst other things), and the process wouldn't complete, so I had to reboot the computer and get Unity as before, still no date & time and privacy.

  Read the article

• Update Manager won't open (error related to pythonverbose)

  - by Mateus Machado Luna

  I'm having an issue with update-manager. Last night, my computer restart suddenly during the update process. Now it won't open and it keep appearing on the notifier with a message warning that an error occurred. The error is the same that is displayed when I try to open it on the terminal: Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected Traceback (most recent call last): File "/usr/bin/update-manager", line 26, in <module> from __future__ import print_function EOFError: EOF read where not expected I've already seen some questions here, but most of them are related to problems with ppas and the source.list file. This seems to be a bug on update-manager itself. I've already tried to remove it and install again, but the problem persists. I also noted another bug: my source-center doesn't open too. The message for it is similar to the other one: Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected Traceback (most recent call last): File "/usr/lib/command-not-found", line 5, in <module> from __future__ import absolute_import, print_function EOFError: EOF read where not expected For now I'm using apt-get update && upgrade for updating and the Synaptic for the source management. But I really would like to fix this stuff. Anyone can help? I'm with Ubuntu 12.10, Gnome-remix, 64-bits.

  Read the article

• Mouse click events are delayed when moving the cursor in xubuntu 12.04

  - by bobbaluba

  I am trying out live xubuntu on my samsung n150 (netbook, similar to eeepc). So far everything seems perfect, except for this one thing. When I am clicking the mouse while moving the cursour, the click event is delayed. This is extremely annoying when i try to to move windows, because i end up clicking the window behind the window i am trying to move and thereby changing focus. This goes for all applications. I.e selecting text is difficult. There is no lag in the cursor movement, just the click event. The click event is registered with the new mouse position, not the one when the mouse was clicked. I tried searching for the problem, but all the other cases where either kind of different, or had no solution. EDIT: After testing some more, here are some more information. The click doesn't occur until i stop moving the cursor. If I move the cursor smoothly around, the click never gets through. I have ubuntu netbook remix 10.04 installed, and have no problems with the mouse there. EDIT2: Once I connected a usb-mouse, the problem dissappeared. Dragging now works perfectly with both the track pad and the usb mouse. I will update once I have installed xubuntu and figured out if this is a persistant problem. EDIT3: I have installed, and the problem is still there. It dissappears when I have a second mouse connected however, and after I resume from suspend. My solution for now, is just to keep the dongle connected all the time.

  Read the article

• Input/output error, when trying to install on netbook [closed]

  - by Ben

  Been trying to install ubuntu on my Samsung NB30 netbook, but I have been running into the same error over and over again. [Errno 5] Input/output error This particular error is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. I'm installing from the USB bootable version, I get the exact same error at the exact same point when trying to install both ubuntu desktop and ubuntu desktop remix. I've tried redownloading both ISOs twice and I've tried two different USB sticks (one being completely new). I've tried installing from with in an ubuntu live session and I get the exact same problem. I've ran a bootable memtest and everything passes with no errors, I've also ran a dmesg in terminal after the installer fails here's what it reported - http://bit.ly/exAQRR Thanks in advance! EDIT: I know this was ages ago, but to anyone out there with the same issue, the problem turned out to be the downloaded image, my internet is poor at the best of times and the ISO failed the MD5sum check, if this happens to you I recommend you download the ISO image by torrent, it'll check the integrity of the file is maintained.

  Read the article

• Getting "Unable to find a medium containing a live file system" when installing 10.10

  - by Krastin Konstantinov

  I got this error while trying to install ubuntu 10.10 from a bootable USB stick on to Sony Vaio P series laptop. The disk boots into the language and installation type screen. After that it goes through the splash and pulls up this error: BusyBox v1.13.3 (Ubuntu 1:1.13.3-ubuntu11) built in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Unable to find a medium containing a live file system After getting this error the installation fails to start. I have used the same USB stick on some other laptops and the installation started as usual. Any help will be appreciated. My installation is i386 and my machine is Vaio P VGN-P610. I've tried every possible thing: Bios: [enable boot external] Boot order: [external] [hard drive] [network boot] Tried 2 different USB drives Tried 2 different external CD drives Tried 6 different downloads of both the desktop and netbook remix. All downloads were checked with MD5SUM. Ubuntu Desktop 9.10 installs properly in every version and from every source. Getting reaaaally frustrated.

  Read the article

• make gnome3 to work as I expect! [closed]

  - by gnome

  Possible Duplicate: How to revert to GNOME Classic? I don't like unity so I tried Ubuntu Gnome Remix 12.10. But I feel disappointed too. - No right click on desktop. (I know there is a way to enable it). - No icon on desktop. - I want to have "applications", "palces", "systems" on top panel as before. It just takes much more steps to arrive where I want to go in default gnome 3 settings. - It seems to me that for some applications, when it is maximalized, there is no close buttons or "restore to previous size" button. In fact, it has no title bar in this case, so I can't drag the title bar to restore its previous size and move the window. So I got 3 questions here: (for those who like the way gnome work before) What difference between gnome2 and gnome3 that you prefer the way it works in gnome2? How do you change it to work in the gnome2 way? I don't like the appearance in gnome3. For those who have tried to make your gnome3 looks good, could you share how you customize your gnome3 appearance? (this is for chatting only, not a real question) Why all the main OS (Windows, Mac, Some Linux) want to integrate Desktop and Tablet with focus on Tablet? (Which means that when it is installed on a desktop, it still has tablet appearance, which makes things strange.) Do they think the personal desktop PC will become less and less?

  Read the article

• Fail to boot after installation onto ASUS PC 1015PX

  - by strugglingbadly

  My new ASUS 1015PX has the usual Windows on the SDA1 partition - 100Gb, followed by SDA2 - 15Gb - as the recovery partition for Windows, and SDA3 with 183Gb for drive D:\ for windows. ASUS uses SDA4 - 19Mb for it's own use. 11.10 on an USB will load Ubuntu on a try basis and it seems OK, but every time I attempt an install, Ubuntu quickly shuts down and the restart process begins. This repeats endlessly. I've tried 10.04 Netbook Remix but that will not boot at all with the machine reporting - unknown keyword in config file gfxboot vesamenu.c32: not a COM32R image. I've gone through the above about 6 times each with the same results. I have also tried the above with the partitioning unchanged, and using gparted, with SDA3 formatted to ext4, windows D:\ reduced to 8Gb providing a 175Gb unallocated space - all to no avail. Further information: During my attempt to load 11.10, I notice that on the page which offers 3 options of loading, the first in the list includes the statement 'install INSIDE windows...' whereas the on line help shows 'install ALONGSIDE windows...'. (my caps for emphasis) I have double checked that I am using the correct download - not the install within windows option.

  Read the article

• What is the correct way to install Gnome Shell 3.6 on Ubuntu 12.10?

  - by user74660

  I don't want to use Ubuntu Gnome Remix because I think it is kind of "incomplete". I prefer to install Gnome Shell on Ubuntu 12.10. I've searched the net for instructions on how to do it and found two different ways: Simply search for Gnome Shell on Ubuntu Software Center and install it. Follow the instructions from this WebUpd8's post. Now, my doubt is: what is the differecen between the two methods? Which is the correct way to do it? Does the first one lack features? If so, which ones? Is the second one better? Why? Is there a third and better method I haven't found? By the way, I have already tried (for testing purposes) the second method (WebUpd8's) and noticed that it installed some apps I really don't want to have, such as AbiWord and Gnumeric, because they are Gnome's default applications. So, "if" the second method is the way to go, I can certainly remove those apps manually, after installation, with no worries, right? Thank you very much for your attention.

  Read the article

• Can't boot to Windows 7 after installing Ubuntu 11.10

  - by les02jen17

  Here's what happened: I have 2 HDDs. 1st HDD is partitioned like this: C - Windows 7 D* - Empty drive where I installed Ubuntu E - Personal Files F - Personal Files 2nd HDD is partitioned like this: G - Personal Files *the D partition is originally part of the C partition. I resized it (using Easus Partition Master in Windows) and defragged it prior to installing Ubuntu. I installed Ubuntu by booting to the Ubuntu Secure Remix CD, and chose the D partition to install Ubuntu. I did not create a swap drive, and I mounted the / to the D partition. I didnt know where to mount the others, so I just thought by mounting the / to D, it would be okay. After the long installation, upon rebooting, I can't access Windows AND Ubuntu. I get an infinite bootloop and eventually the choices to boot to Safe Modes, Last Known Good Configuration and Start Windows normally. After failing in all of them, I placed the CD back and ran the Boot Repair. I chose the MBR 1st, it didn't work. I then chose the GRUB 2nd and now I was able to boot to the Ubuntu I installed, but not to my Windows 7! I'm using my newly installed Ubuntu while writing this. I hope you can help me. I did the best I could! Here's the link to the boot repair log: http://paste.ubuntu.com/919354/ Thanks in advance!

  Read the article

• Ubuntu 12.10 and nVidia drivers don't like each other?

  - by mingos

  I decided to upgrade both my computers from Precise to Quantal. What a mistake that was. My laptop has a nVidia GT 330M card, while the desktop has an nVidia 9600 GT. In both cases everything goes great as long as I use the Nouveau driver (ugh!). Can't really play games (Amnesia... and hoping for Steam Beta participation...), even though it's OK for work. Now, ever since 9.04 or so, I just installed nvidia-current and all just worked. Since 12.10, after installing nVidia drivers, Unity won't start at all (hangs with only the wallpaper displayed, no cursor or widgets), Gnome Shell is permanently in fallback mode. Now, I have tried on both computers, with multiple clean installs on Ubuntu (two separate downloads, just in case), one from Ubuntu Gnome Remix. And additionally, Fedora 17, which seems to suffer from the same issue. Tried all nVidia driver suggestions available in Software Sources, and even compiled the drivers myself. I tried several versions of the driver to exclude an issue with the newest one. In my frustration, I have switched to Windows (which, ironically, "just works" with my hardware), but still hold a twin OS configuration on the desktop and would like to use Ubuntu again. So, can anyone point me to where the issue might lie?

  Read the article

• Intel Core i7 QuadCore on HP Pavilion dv7 Overheating Issues

  - by kellax

  I bought a brand new HP notebook: HP Pavilion dv7-6b21em BeatsAudio edition. The notebook is about 2 months old and has pretty nasty overheating problem. I mainly use it for development however i do play some games. The disturbing thing is that the computer is loud on pretty simple tasks. Here are the specs: CPU: Intel Core i7-2670QM QuadCore ( 8 threads ) @ 2.20 GHz RAM: ( 8GB ) 2x 4GB @ 1066 HDD: 1TB 7200 GPU: ATI Radeon HD 6770M 1GB Dedicated DDR OS: Windows 7 64bit Enterprise I have an external monitor runing on VGA port an 22' Samsung SyncMaster S24B300 CPU Heat Statistics Platform: rPGA 988B (Socket G2) Frequency: cca. 3000 Mhz VID: 1.1809 - 1.2059 v Revision: D2 CPUID: 0x206A7 TDP: 45.0 Wats, Lithographu: 32 nm Heat: Tj. Max: 100*C, Power 4.5 - 5.9 Wats Core #0: 63*C Load on all is about 0 to 2% Core #1: 65*C Core #2: 66*C Core #3: 67*C I opened the notebook the fan is working fine there is no dust but still right now the fan is pretty loud even tho all i have open is FireFox. When i run a game the heat jumps to whopping 90-97*C. It has not shut down due to overheating yet but the loud fan is pretty annoying considering I'm not really doing anything stressfull. Is there anything i can do to fix this is it maybe a BIOS issue ? I have all drivers updated tho to the latest. I have very few background processes running consuming bare 2GB of RAM and about 2% of CPU. I had it serviced they said there is nothing wrong with it. But i feel that a Notebook that costs 1.2k Euros cant be like this.

  Read the article

• Is there any way to limit the turbo boost speed / intensity on i7 lap?

  - by Anonymous

  I've just got a used i7 laptop, one of these overheating pavilions from HP with quad cores. And I really want to find a compromise between the temp and performance. If I use linpack, or some other heavy benchmark, the temp easily gets to 95+, and having a TJ of 100 Degrees, for a 2630QM model, it really gets me throttling, that no cooling pad or even an industrial fan could solve. I figured later that it is due to turbo boost, and if I set my power settings to use 99% of the CPU instead of 100%, and it seems to disable the turbo boost, so the temp gets better. But then again it loses quite a bit of performance. The regular clock is 2GHz, and in turbo boost it gets to 2.6Ghz, but I just wonder if I could limit it to around 2.3Ghz, that would be a real nice thing. Also there is another question I've hard time getting answer to. It seems to me that clocks are very quickly boosting up to max even when not needed, eg, it's ok if the CPU has 0% load, the clocks get to their 800MHz, but even if it gets to about 5% it quickly jumps to a max and even popping up turbo, which seems very strange to me. So I wonder if there is any way to adjust the sensitivity of the Speed Step feature. I believe it would be more logical to demand increased clock if it hits let's say 50% load. I do understand that most of these features are probably hardwired somewhere in the CPU itself or the MB, which has no tuning options just like on many laptops. But I would appreciate if you could recommend some thing, or some software. Thanks

  Read the article

• PC dies when running at 100% CPU

  - by user155631

  I recently wrote some Java code to generate images of the Mandelbrot set (fractal). I made use of the new Fork/Join facility in Java 7 to run separate threads on all four cores (2 real, 2 virtual)simultaneously, using a large number of iterations for greater accuracy. The problem is, the process runs fine for about a minute, and then it's as if someone has pulled the plug and the PC just dies. I thought it must be the CPUs overheating, so I ran Real Temp to monitor the temperature. It's an Intel i3 processor. I can see the temperature creeping up to 70 degrees, and then it seems to level off there and run for about another 30 seconds before dying. According to Real Temp, there's still a gap of 35 degrees between the actual temperature and TJ max. I also tried disabling "CPU TM function" in the BIOS, but the problem still occurs. A colleague suggested that it might be a power supply problem, so I borrowed a more powerful PSU (can't remember what wattage it was, but it's higher than mine which is 500W). The exact same thing still happens though. Is anyone able to suggest what the problem might be, or what I can try next?

  Read the article

• jquery json function returning null

  - by ian

  I have a jquery script as below: $.ajax({ type: "GET", url: "http://www.site.com/v4/ajax/get_song_info.php", data: ({id : song_id }), dataType: "json", success: function(data) { alert( "Data: " + data ); } }); And the associated php page: <?php include_once '../connect.php'; $song_id = $_GET['id']; $query = mysql_query("SELECT * FROM songs WHERE id = '$song_id' LIMIT 1"); $song = mysql_fetch_row($query); $song_info = array( htmlentities($song[3]) , htmlentities($song[4]) ); header('Content-Type: application/json'); echo json_encode($song_info); ?> The php returns something like this when I call it on its own in a browser: ["Peaches","I Feel Cream (Proxy Remix)"] However when I make the jQuery call my alert shows 'Data: null'

  Read the article

• HighPoint RocketRAID 62x Controller

  - by TeXnewbie

  I have the subject card recently installed in Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-31-generic x86_64). See partial lspci -vv listing below (complete listing played havoc with pre tags): 03:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 0622 (rev 01) Subsystem: HighPoint Technologies, Inc. Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 9c00 [size=8] Region 1: I/O ports at 9800 [size=4] Region 2: I/O ports at 9400 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8c00 [size=16] Region 5: Memory at fdbff000 (32-bit, non-prefetchable) [size=2K] Expansion ROM at fdbe0000 [disabled] [size=64K] Capabilities: I followed instructions I found at https://help.ubuntu.com/community/RocketRaid to compile the drivers for it, and although performing the process described there seemed to work fine with no noticeable errors, when I rebooted after performing that procedure I could not boot. During dkms steps, I noticed messages indicating that (If next boot fails, revert to initrd.img-3.2.0-31-generic.old-dkms image) update-initramfs................ so I booted using a Ubuntu 12.10 LiveDVD and reverted to the old-dkms initrd.img as suggested above, but this failed to repair the boot problem. Ultimately, I used https://help.ubuntu.com/community/Boot-Repair in Ubuntu-Secure-Remix to fix the boot problem and was able to boot normally again, but now with the newly generated initrd.img in place again (which now boots normally), when I modprobe the rr62x kernel module, I immediately get a hard crash with messages to console about a kernel paging request that seems to have caused the problem. I've tried on multiple occasions now to use the newly built kernel module so as to allow me to use an eSATA port multiplier plugged into the card, but to no avail. Any suggestions on fixes or workarounds (I've read that some of the HighPoint cards (2720SGL) seem to work as a host bus adapter and thus may not need a custom driver, but that seems not to be the case for mine) would be most appreciated. My goal is to use the card as described here and with software RAID mdadm utilities. If necessary, I can hand-copy the console messages after the hard crash into a follow-up message, but I obviously can't do a cut/paste. I'll gladly provide any other details that are needed, but not sure what those would be at this point, so I'll refrain from adding other details for now. Thanks in advance for any help.

  Read the article

• iPhone SDK: Memory leak on picker

  - by bbftsoftware

  I have created a picker for my users to pick from a list of countries. The problem is that repeated opening and closing of the picker is resulting in “EXC_BAD_ACCESS” error. I suspect it might be a memory leak but I am not sure. I was hoping someone could shed some insight into why this might be happening? //data source for UIPicker NSArray *arrayCountryChoices; arrayCountryChoices = [[NSArray alloc] initWithObjects:@"TK=TOKELAU", @"TJ=TAJIKISTAN", @"TH=THAILAND", @"TG=TOGO", @"TF=FRENCH SOUTHERN TERRITORIES", @"GY=GUYANA", @"TD=CHAD", nil]; //opening the picker CountryViewController *countryVC = [[CountryViewController alloc] initWithNibName:@"CountryView" bundle:nil]; countryVC.delegate = self; [self presentModalViewController:countryVC animated:YES]; [countryVC release]; //here is where I grab the data //close country selector [self dismissModalViewControllerAnimated:YES]; //parse out code NSString *strCode = [chosenCountry substringToIndex:2]; //set the gui txtCountry.text = strCode; I think it may be because I am trying to release the Country Selector before the delegate has a chance to get its data? Also I am wondring if I should not release the picker until the screen that calls it is released. Thanks in advance.

  Read the article

< Previous Page | 3 4 5 6 7 8  | Next Page >