Search Results

Search found 954 results on 39 pages for 'xorg'.

Page 7/39 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Xorg and Virtualbox break after installing Xen

  - by stueng

  I installed XEN using these instructions https://help.ubuntu.com/community/Xen Now when I rebooted virtualbox doesnt work, X doesnt work, lightdm doesnt work How can I set it back to how it was before? I presume I want to revert the following actions: Modify GRUB to default to booting Xen: sudo sed -i 's/GRUB_DEFAULT=.*\+/GRUB_DEFAULT="Xen 4.1-amd64"/' /etc/default/grub sudo update-grub Can someone tell me how?

  Read the article

• Python 2.7 and Ubuntu 10.10: X11 fails

  - by c.a.p.

  Against every recommendation I have apt-get remove python in Ubuntu 10.10 (build 2.6.24-29-server x86_64) and apt-get install python2.7 Some built-in software with python2.6 dependencies (like firefox, other minor stuff) was fixed just by apt-get reinstalling or reinstalling from source and the system was stable for one day until I rebooted. Upon booting I got the message "ubuntu is running in low-graphics mode" I have an NVIDIA Quadro NVS 295 256 running on a HP Z600 Workstation so I sudoed: apt-get --purged nvidia* apt-get --purged xserver apt-get install linux-headers-generic apt-get install nvidia-* apt-get install xserver-xorg dpkg-reconfigure xserver-xorg nvidia-xconfig upon rebooting i get the same "ubuntu is running in low-graphics mode" if I decide to tell the boot menu to restart X, the Ubuntu 10.10 "load screen" shows up and does not do anything for hours. If I "X" the screen remains black for hours; ctrl-c shows that /etc/X11/xorg.conf did not produce any errors just a warning "Type "ONE_LEVEL"...". /var/log/Xorg.0.log issues the following warnings (no errors) (WW) AllowEmptyInput is on (WW) NVIDIA(0): UBB is incompatible If I "startX" I get /usr/bin/python: can't find '__main__.py"' in '/usr/share/command-not-found' Before re-installing xserver-xorg however "startX" ran, just by changing the resolution of the tty1 console. Any hints?

  Read the article

• Configure 27" 2560x1440 for a monitor with corrupt EDID

  - by Aras

  I am trying to get a monitor work with my Ubuntu laptop. The monitor is this cheap 27" Korean monitors which has a 2560x1440 resolution -- and nothing else. Here are some specifications of this monitor: 2560x1440 @60Hz Only one dual link DVI-D input -- no other input port (no HDMI or display port) no OSD no scalar reports corrupt EDID does 2560x1440 @60Hz, did I say that already? Anyways, the monitor works beautifully with my Ubuntu desktop which has an nVidia card with DVI output. However, I am having problem using this monitor with my laptop. After some searching around I found a few posts suggesting to use an active adaptor for mini display port, so I went and bought a mini display to dual link DVI-D adaptor.. When using this adaptor the monitor is recognized by nvidia-settings tool but with incorrect resolution information. As you can see the monitor is incorrectly recognized and there are no other resolution available to set. This post on ubuntu forums and this other post on overclock both suggest that the monitor is reporting corrupt EDID file. I have tried following their instructions, but so far I have not been able to display any image on the monitor from my laptop. The laptop I am using is an ASUS G75VW with a 1920x1080 screen. It has a VGA, an HDMI 1.4a, and a mini display port. The graphic card is an nvidia gforce gtx 660M with 2GB dedicated memory. I am running Ubuntu 12.10 on here which I upgrade from 12.04 a few weeks ago. As I said I have tried several suggestions, including specifying Modeline in xorg.conf and also linking to EDID files I found from those forum posts above. However, I am not sure if the EDID files I found are suitable for my monitor. I think the solution to my problem consist of obtaining the EDID file of my monitor and then fixing it and modifying xorg.conf to force nvidia driver to load the correct resolution. However, I am not sure what steps I need to take to do this. Here is the part of sudo xrandr --prop output that is related to this monitor: DP-1 connected 800x600+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm SignalFormat: DisplayPort supported: DisplayPort ConnectorType: DisplayPort ConnectorNumber: 3 (0x00000003) _ConnectorLocation: 3 (0x00000003) 800x600 60.3*+ I was expecting to see the EDID file in this output as was mentioned in this post, but it is not there. After several hours of tweaking X configurations, I decided it was time to ask for help here. I would really appreciate if someone with experience regarding EDID and X configuration could give me a hand to solve this issue.

  Read the article

• twin view on gnome when monitor is unplugged

  - by james t

  i have a macbook pro which is often connected to a monitor, twin view on gnome works pretty well, but a problem arises when i disconnect the monitor, any window that resided on that workspace is no longer available. another issue is when i start my computer when a monitor is not present, because xorg.conf file has the monitor configuration in it, my mouse pointer often disappears in the other monitor's virtual space, as if it is currently plugged, osx deals with this issue elegantly by refreshing the display every time a plug in/out occurs, is there anything similar that can be done in linux ?

  Read the article

• Compiz crashes after login

  - by T.Kijas

  after I log-in into Unity, compiz effects are disabled and it says compiz crashes. Restart of them usually works, but not every time. After restart of compiz, compiz works without problems, every effect is OK. I tried latest NVIDIA drivers from xorg-edgers, but situation is the same. I tried to delete folder with compiz settings, but it hasn't helped. I use two LCDs, but with only one enabled, the situation is the same. Thank you for suggestions.

  Read the article

• How to chroot Ubuntu+1?

  - by jrg

  What is the recommended way to use chroot from Ubuntu Stable (in my case 11.04) with Ubuntu+1 (11.10)? Linked (but probably separate) is "Is there anything special that I need to do in order to get Xorg working?" Reason I ask is because I'd like to test a few GTK3 programs without losing my current (stable) Ubuntu, or having to get my data synced. I thought about maybe running a SSH server from 11.10 and then using SSH's X forwarding, but that seems rather cumbersome.

  Read the article

• Custom Ubuntu 12.04 distro not booting

  - by user1427152

  After following the instructions at: https://help.ubuntu.com/community/LiveCDCustomizationFromScratch; I installed xorg, gdm, and gnome. For some reason when I try to run it on both of my computers and qemu, it freezes up. Sadly I cant access a console to view all my logs, but I do have a dump of the boot process. I can also add and remove packages by ch-rooting into the compressed file-system. DUMP: http://pastebin.com/qRZFAAeM

  Read the article

• Adjust resolution in xfce4 virtualbox guest guest

  - by David

  I have Virtualbox 4.1.2_ubuntur3859 installed on an Ubuntu 11.10 host, running a guest ubuntu server 10.04 with xfce4 and xorg installed with no-install-recommends. I have installed guest additions, but the maximum resolution in the display settings is 800x600. I have read related questions: How to change resolution of the VirtualBox (Ubuntu guest and host)? Higher screen resolution in VirtualBox? upgrading VirtualBox 3.2.10 breaks my guest Ubuntu screen resolution Ubuntu as guest OS (with Vista host) stuck at 800x600 resolution but none contain the solution to my issue. Am I missing any particular packages that would allow me to change resolution? I would like to keep the machine as small as possible.

  Read the article

• Not Working Nvidia GT 635M drivers

  - by Andres

  I'm having problems trying to use my Nvidia 635M in my asus N46VJ laptop. I open the "Nvidia X server settings" I get this message : "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server." I open the terminal typi "sudo nvidia-xconf" and this creates a file, /etc/X11/xorg.conf After reboot I'm in a lower resolution of 640x480, without other options to change it, then open the Details system and it shows me this in the Graphic item: Intel® Ivybridge Mobile I type this in the terminal (no idea what that means, I just saw it in a forum!!!) lspci -vnn | grep '\''[030[02]]' and get this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 635M] [10de:0de3] (rev a1) (prog-if 00 [VGA controller]) I installed bumblebee but nothings happens additionally the additional drivers shows me "no propietary Drivers are in use on this system"

  Read the article

• X doesn't find nvidia module when installing developer driver

  - by Nils

  I just downloaded the developer driver from Nvidia's CUDA Zone. Executed it and typed in restart gdm and the it worked. However after rebooting X didn't come up (xorg log), to fix it I can simply rerun the installer and the restart gdm again. What I don't understand is where it breaks and why X11 doesn't find the module?! I removed all (I think..) of the Nvidia packages which can with Ubuntu 10.10. I've also googled a bit and found some HOWTOs about manually installing the Nvidia driver. However all of them were for an earlier version of Ubuntu. Please do not respond telling me I should use the proprietary Nvidia driver supplied by Ubuntu, because I need the development drivers.

  Read the article

• How to config multiple monitor with optimus?

  - by irrational

  I have an Acer Aspire 8951G running 12.04 Pangolin with bumblebee working beautifully. My problem is that when I connect either the VGA port or the HDMI to my projector there is no way I can see to properly set up the resolutions or colours. The default basic display driver sees the projector correctly, but messes up colours and resolutions (on hdmi) and resolutions on VGA. (Its a 1280 X 720 projector) Am I missing some sort of Xorg configuration? nvidia-xconfig does not seem to exist and running optirun nvidia-settings -c :8 opens the settings, but of course only for the one display. I just want a way to set a default config for my projector via VGA or preferably HDMI. Any help would be wonderful.

  Read the article

• How do I get Poulsbo (GMA500) drivers to work?

  - by slayerman

  I'm trying to get working the Poulbo driver under Ubuntu 9.10. I've installed poulsbo-driver-2d poulsbo-driver-3d poulsbo-config packages from sudo add-apt-repository ppa:gma500/ppa. The packages installation is working. After I have to put in xorg.conf driver "psb". Then I reboot and I have no more display. I have to switch back to vesa in order to display back. Can someone give me some kind of solution?

  Read the article

• Cannot assign keys to Wacom scroll wheel anymore

  - by UncleZeiv

  Hi all, my Wacom Graphire 4 used to work perfectly well until, I think, Ubuntu 10.4. At that point something changed in the configuration and I couldn't assign a key to the scroll wheel anymore (note: the pad's scroll wheel, not the mouse's), i.e this command: xsetwacom set "Wacom Graphire4 6x8 pad" AbsWDn "key +" returns silently without error but nothing happens. Same goes for AbsWUp, RelWDn, RelWUp. Apparently though the problem is even deeper as pressing the wheel in a xev window doesn't seem to have any effect. Moreover I am thoroughly confused on how the various pieces (kernel driver, xorg driver, evdev, HAL, xinput?) are supposed to work together and if the wacom module that ships with Ubuntu is the one from linuxwacom or not. Any ideas? I don't want to become an X.org hacker just to understand what's going on... it used to work! NOTE: I have already read question 3940, but that's not the same problem.

  Read the article

• stuck with 640x480 resolution using bumblebee on 10.04

  - by pholz

  I just installed bumblebee on a Dell XPS L502X. It basically works: optirun glxspheres does exactly what it should. However, X is running with a resolution of 640x480. I can try to change settings with optirun nvidia-settings -c :8 (as suggested on the bumblebee wiki), but in the relevant section it only lists resolutions up to 640x480. In the /etc/bumblebee/xorg.conf.* files, there are no Monitor or Screen sections. Adding them doesn't change anything. How can I change the resolution?

  Read the article

• How to make "xrandr" work with GMA500?

  - by Nwbie

  Is it error at driver of graphic chip or Xorg or kernel? I am Asus T91mt with GMA500, Ubuntu 12.04.1. I would like too see only a notice of connection at least. A log of xrandr: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation System Corporation System Controller Hub (SCH Poulcbo) Graphics Controller (rev 07) vp@vc:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 (0x138) normal (normal) 0mm x 0mm Identifier: 0x137 Timestamp: 26863 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1024x600 (0x138) 0.0MHz *current h: width 1024 start 0 end 0 total 1024 skew 0 clock 0.0KHz v: height 600 start 0 end 0 total 600 clock 0.0Hz vp@vc:~$ xrandr --prop xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 0mm x 0mm 1024x600 0.0* vp@vc:~$ Please help, i am linux newbie and i am tired ;/

  Read the article

• KVM switching from lower resolution system resets Ubuntu high resolution

  - by Ed Manet

  I'm running 12.04 desktop on my main desktop and it's hooked to a KVM (IOGear miniview) that shares the peripherals with a SLES 11 machine. The SLES 11 machine can't get the same resolution as the Ubuntu machine because of different graphics hardware. If I switch from Ubuntu to SLES and stay there too long, when I switch back to Ubuntu the screen resolution on Ubuntu is reset to the same as SLES. I can get it back easily just opening the Displays configuration; it immediately resets to the high resolution as soon as the Displays window opens. But all my open windows have been maximized and it's a P.I.T.A. having to resize them all again. How do I get it to just stay at the high resolution between switching between systems? Is there a setting in the Xorg conf file I need to set?

  Read the article

• Black screen after upgrading from 13.04 to 13.10

  - by Harri

  Just upgraded from 13.04 to 13.10 and all I got was a black screen. The hardware I'm running is Asus Zenbook UX31A (Intel GPU). I do hear that the login screen drums do play, so the system does boot to login screen. When I try to boot using kernel 3.11.0-12 recovery mode, it tells me "initctl: event failed". Then if I go on an press ctrl+alt+f2, log in and command startx, it dies because "Fatal server error: no screens found". Here are some logs from /var/log/Xorg.0.log http://pastebin.com/ZQasUKJx Kernel 3.8.0-31 work ok, as did things before the upgrade.

  Read the article

• ubuntu 12.04 returns to login screen on resume from suspend. Is there a fix?

  - by Chad

  When I resume from a suspend, Ubuntu 12.04 will come back ok for about 10 seconds, and then the screen blanks out. After about another second or so, it returns to the login screen for Unity 2d. It normally runs Unity 3d. How can I fix this? I've lost a lot of work from this problem. I sometimes get a error report window asking me to report a Compiz crash after rebooting. I think it may be Compiz or the Xorg server causing the problem. I'm not really sure. Thanks if you can provide help.

  Read the article

• Freezes if desktop effects is used.

  - by munir

  I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

  Read the article

• internal error message pops up after each time system is rebooted

  - by Biju

  I had installed ubuntu 12.04 using wubi. But each time i boot the system an internal error message pops up. As show below:- Executable path /usr/share/apport/apport-gpu-error-intel.py Package xserver-xorg-video-intel 2:2.17.0-1ubuntu4 Problem Type crash Apportversion 2.0.1-0ubuntu7 and so on.. I had earlier upgraded to ubuntu 12.04 from ubuntu 11.10. And encountered the same issue. Hence i uninstalled the OS and reinstalled using wubi. I had posted the same query in ubuntu.com/support (Question Number: 195525) But couldnt find a solution. I am using dell inspiron with intel pentium. Need ur help in resolving this issue. thanking u, Biju

  Read the article

• keyboard shortcut to switch focus between separate X screens?

  - by ang mo

  I'm using XFCE on a dual monitor setup, with Xorg configured to separate X screens (neither twinview nor cinerama is working on GF470 with latest nvidia drivers). I'm not using xrandr. Suppose I have firefox running on one screen (:0.0) and thunderbird on the other (:0.1). When I want to switch focus from thunderbird to firefox, I need to move my mouse pointer to the firefox window and click (alt-tab switches between windows on a single screen only). Is there any keyboard shortcut for switching focus between screens?

  Read the article

• Freezes if desktop effects is used [closed]

  - by munir

  I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

  Read the article

• Empty nvidia-settings after install v. 331.67 driver on Ubuntu 14.04?

  - by Victoralm

  I've followed this tutorial (with the following adjustments below) to install v. 331.67 nVidia driver. But get nvidia-settings (NVIDIA X Server Settings) empty... Then, before restart the PC, I make a xorg.conf in the nvidia-settings. The driver make Unity don't start right. So I installed nvidia-331-updates via apt-get and restarted the PC again. After that, the Unity works fine. But the nvidia-settings gets almost empty... Can someone help !?

  Read the article

• Desktop background will not load after performing aticonfig --adapter=all --ovt=opengl

  - by user1571959

  I am trying to get Eagle to work on ubuntu 14.04 LTS. When I run Eagle and open a schematic the display is not refreshing/redrawing correctly. One solution that I found was to install the flgrx drivers and do the aticonfig command to use opengl... So I did and rebooted. Now when I turn on my laptop I get all the way to the login screen, login, and then nothing happens, it just goes to the background image with no icons or anything... I tried deleting and copying the original xorg.conf file and no results... What do I do other than reinstalling Ubuntu? is there anyway to force the original driver?

  Read the article

• Menus and text boxes look graphically corrupted in 12.10

  - by Stanton.Sculpture

  If I let my computer run long enough the screen gets glitchy or graphically corrupted only in certain areas i.e. in text related boxes, menus, menu bars, scroll bars, the system monitor window, etc. It becomes difficult to read what I am typing. Its been happening quite often and I can only fix it by restarting the computer, but its only a matter of time before it happens again. Don't know what else to do, its been a thorn in my side for quite some time now and I need a fix soon because its only gets more frequent until I'm rebooting my computer five times a day. I attached a picture of what happens to this bug report: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1083474 I know I can repeat this bug but I don't know how to catch it and document it. Any help would be greatly appreciated. Thank you

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >